It might be (nice find). Although if these are just the PIDs that Torque Pro already has then they won't work for our car. I can't run out to my car right now but if anyone wants to try it you can take the "TXD" column and go from there...
Basically that is an address - I'm guessing the 07E0 part is the transmission controller address. the "22" is the standard OBD information request and the "1674" is the reference (hopefully) to the specific sensor - in this case transmission temp.
You would basically enter "221674" in the PID area - you might need to put the "07E0" in the header field. I would try it with it and without it. You can ignore the equation and just put an "A" in there for the variable. Hit the test button at the bottom and see if you get a response. If you do then we can go from there. If not then the PID won't work for our car...
I will try it later if I can or tomorrow!
Transmission Fluid Temperature 07E0221674 046205160674 3010 000100080000 TFT Degrees Fahrenheit
Alt Transmission Fluid Temperature 07E1221674 046205160674 3010 000100080000 TFT Degrees Fahrenheit
Alt Transmission Fluid Temperature 07E0221E1C 0462051E061C 3010 000900500020 TFT Degrees Fahrenheit
Alt Transmission Fluid Temperature 07E1221E1C 0462051E061C 3010 000900500020 TFT Degrees Fahrenheit