- Currently World’s Fastest Ecoboost SHO
- RotM Winner
-
- Elite Member
- Posts: 1,458
- Boosted
-
- Location: Essex Junction Vermont
- Logged
1" hubcentric wheel spacers. I tried these out last year briefly and took them off and sent them back. My rear tires were rubbing on the 10'oclock position(rear bumper mount). Feeling determined to get these on I reordered a set and while I had my rear bumper off to install my new rear reinforcement bar, I got to some cutting. The tab there stick in the the fender area a bit....I trimmed some and cut some on both sides in the rear. I cut and trimmed around the mount, not eliminating it. It's not pretty but it gets the job done. Only way to see it is to look in my wheel well a tad...in which case no one will see it. I did not rub up front at full turn so no trimming up front.
I had a chance today to test fit the rears and go for a test drive, down the same bumpy crappy road. I rubbed once...compared to every single bump like last time. 90% done. I think I'll heat some of whats left up highlighted in red and push it in. Going for no rubbing at all. Almost there. Looks amazing though. One pic driverside no spacer, compared to passenger side with spacer.
My wheels are 20x9.
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World's Fastest Ecoboost SHO
11.063 @ 123.17 MPH! NED 10/10/20