• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Screws for splash shield

Started by pmezo33, August 28, 2015, 06:52:04 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

pmezo33

August 28, 2015, 06:52:04 PM
Not sure if the SHO has this, but on my MKS there's a splash shield under the car that protects the engine from the elements.  It's the piece you need to remove to get to the oil filter and everything else in that general area.  It's bolts into four spots on the frame into these u-clips.  Looks like I'm missing one of the screws and bumpers.  Anyone know where i can get a new screw and bumper for this?  Does anyone sell them?

SHOdded

#1
August 28, 2015, 07:10:40 PM
Fordparts.com probably lists them, don't know if a hardware store substitute can be rigged.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

pmezo33

#2
August 28, 2015, 07:29:03 PM Last Edit: August 28, 2015, 07:55:43 PM by pmezo33
I checked... didn't find anything there.  Might have to just go to the hardware store and rig something up. 

Edit:  Never mind.  Found my part on fordparts.com.  Thanks.

SHOdded

#3
August 28, 2015, 07:56:47 PM
:thumb:
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

BiGMaC

#4
August 28, 2015, 07:59:39 PM Last Edit: August 28, 2015, 08:08:00 PM by BiGMaC
Quote from: pmezo33 on August 28, 2015, 06:52:04 PM
Not sure if the SHO has this, but on my MKS there's a splash shield under the car that protects the engine from the elements.  It's the piece you need to remove to get to the oil filter and everything else in that general area.  It's bolts into four spots on the frame into these u-clips.  Looks like I'm missing one of the screws and bumpers.  Anyone know where i can get a new screw and bumper for this?  Does anyone sell them?

Have you checked with a ford dealer? They are important to keeping your hood on above 90 mph or so... More than a splash shield going on. Like creating lift on an airplane wing the pressure under your car is higher at speed than above it.

•2013 Taurus SHO nonPP - All Ford factory options, 3BAR MAP, LMS v8 tune (mods for 3BAR, DPs, and T-stat), Paint & plastic correction, CQuart finest all exterior surfaces, limo black window tint,VLED Triton switchbacks, Daytime BrightLites switchback DRLs, full interior and exterior LED conversion, Lamin-X charcoal blackout tail lights and reflectors, PPE catted and coated downpipes, EBPP coated hotpipes with BoVs VTA, MDesign CAI
•2013 F250 CC Lariat 6.7EB Diesel -stock
Print
Go Up Pages1
User actions