• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Time to Rebuild the SHO

Started by mrhighcaliber, July 06, 2018, 06:29:39 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

mrhighcaliber

#15
July 07, 2018, 12:48:14 PM
Quote from: bpd1151 on July 06, 2018, 06:36:36 PM
Geez.

She did her job by the looks of the psgr. compartment remaining intact.

R.I.P. on your loss.

Time to order a new 2019 while you can.
Thanks. She performed admirably. And good looking out on the legal advice.

Sent from my PH-1 using Tapatalk

mrhighcaliber

#16
July 07, 2018, 01:05:55 PM
Quote from: glock-coma on July 07, 2018, 10:26:00 AM
Quote from: mrhighcaliber on July 06, 2018, 06:29:39 PM
First things first. No one was hurt. But I definitely pleasured the rear end of a Jeep Cherokee.

Sent from my PH-1 using Tapatalk

Damn dude, glad everyone is ok.
Looks like crash test footage, crumpled as designed.
I'm sorry to see such a beautiful specimen wrecked like that.
I've been following your builds,  definitely fight for EVERY dollar you can get back.
Thank you I really appreciate it. I'm currently closing on my house, getting married in sept and have upgrades planned for that home. I'm seriously considering fixing my sho. Insurance will more than likely total it. But I'm a senior prototype tech at ROUSH/Ford. There's no visible subframe or unibody damage (besides the rh fender support). We're gonna put her on the frame rack and laser check the frame alignment. But a few of my coworkers say it's more than repairable cause the frame looks fine. If parts is all I have to worry about, I will break in my new house garage rebuilding her  as time and funds permit. No rush. Haven't decided if I want that claim on my insurance yet either. I would buy it back and purchase a sho surrogate if I went that route. But thank God I have my off road/ winter truck to drive.

Sent from my PH-1 using Tapatalk

SHOdded

#17
July 07, 2018, 04:35:02 PM
:o  Would be freakin awesome if you can get er back up and running again!
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

DstryEvrytng

#18
July 09, 2018, 11:01:32 PM
Friggin slow SUV's, always soccer moming around eveywhere. Jk

Glad there was no injuries. Im suprised its still mostly straight judging by the damage. Crumple zones ftw!!!!
15 SHO/pp, bone stock besides the "idiot driver" mod.

mrhighcaliber

#19
December 28, 2018, 08:34:45 AM
DarthVaderProject Phase 1

Finally making major moves with the rebuild since the accident. Powertrain pulled, ordered the following new components:

New water pump
New motor mount
New trans mount
New Billett oil pump gears
New timing tensioners
New timing guides
New timing chain
New timing cover
New rh turbo oil line
New Coolant Bottle
New Turbo gaskets

Sent from my PH-1 using Tapatalk

StealBlueSho

#20
December 28, 2018, 08:37:48 AM
Quote from: mrhighcaliber on December 28, 2018, 08:34:45 AM
DarthVaderProject Phase 1

Finally making major moves with the rebuild since the accident. Powertrain pulled, ordered the following new components:

New water pump
New motor mount
New trans mount
New Billett oil pump gears
New timing tensioners
New timing guides
New timing chain
New timing cover
New rh turbo oil line
New Coolant Bottle
New Turbo gaskets

Sent from my PH-1 using Tapatalk


Accident? Are talking about the window in your motor? Or something else?

How did you window your motor?

Sorry to hear about it none the less...


Sent from my iPhone using Tapatalk

SHOdded

#21
December 28, 2018, 10:58:47 AM
How many miles on the engine?  Good time to replace the VCT solenoids, and at least test if not replace the cam/crank position sensors as well.  Do you have access to a high level scan tool?  You can run the injectors through their paces.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

jims2015

#22
December 28, 2018, 11:13:30 AM
Quote from: mrhighcaliber on December 28, 2018, 08:34:45 AM
DarthVaderProject Phase 1

Finally making major moves with the rebuild since the accident. Powertrain pulled, ordered the following new components:

New water pump
New motor mount
New trans mount
New Billett oil pump gears
New timing tensioners
New timing guides
New timing chain
New timing cover
New rh turbo oil line
New Coolant Bottle
New Turbo gaskets

Sent from my PH-1 using Tapatalk

Dang. I wish I had your ambition
2015 PP, Thunderstorm DP & CAI. AlkyControl, Livernois dyno tune

2019 Corvette C7 Z51 A8 No mods

mrhighcaliber

#23
December 29, 2018, 09:21:22 AM
Quote from: SHOdded on December 28, 2018, 10:58:47 AM
How many miles on the engine?  Good time to replace the VCT solenoids, and at least test if not replace the cam/crank position sensors as well.  Do you have access to a high level scan tool?  You can run the injectors through their paces.
About 115,000. And I think I will replace the vct solenoids and crank sensor. I didn't have any issues, but all of the other timing items besides the timing cover, were "well, the timing cover is coming off anyway, let's upgrade/replace everything!" Items.

And yes, I own IDS and the VCMII module and an MsAutel 906BT.

Sent from my PH-1 using Tapatalk

mrhighcaliber

#24
December 29, 2018, 09:44:30 AM
Quote from: StealBlueSho on December 28, 2018, 08:37:48 AM
Quote from: mrhighcaliber on December 28, 2018, 08:34:45 AM
DarthVaderProject Phase 1

Finally making major moves with the rebuild since the accident. Powertrain pulled, ordered the following new components:

New water pump
New motor mount
New trans mount
New Billett oil pump gears
New timing tensioners
New timing guides
New timing chain
New timing cover
New rh turbo oil line
New Coolant Bottle
New Turbo gaskets

Sent from my PH-1 using Tapatalk


Accident? Are talking about the window in your motor? Or something else?

How did you window your motor?

Sorry to hear about it none the less...


Sent from my iPhone using Tapatalk
Lol! Window! I had and accident back in July. I bought it back from insurance. But I was in the middle of searching for a home and planning a Sept wedding.

So now that I have said home, with garage, I start rebuilding. Faster, stronger...on the Dark side.

Engine mount punched a hole in the timing cover when it broke.

Sent from my PH-1 using Tapatalk

mrhighcaliber

#25
December 29, 2018, 09:53:04 AM
When I brought her home.

Sent from my PH-1 using Tapatalk

SHOdded

#26
December 29, 2018, 11:22:19 AM
First time I have seen a mount punch holes in the timing cover LOL.  Usually a belt tensioner or timing chain.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

802SHO

#27
December 29, 2018, 11:53:43 AM
The wheels in the crash.  Are they staggered?  Is the rear 20x10 and the front 20x9 or 20x8?  I like them.
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World's Fastest Ecoboost SHO
11.063 @ 123.17 MPH!  NED 10/10/20

mrhighcaliber

#28
December 29, 2018, 03:16:42 PM
Quote from: 802SHO on December 29, 2018, 11:53:43 AM
The wheels in the crash.  Are they staggered?  Is the rear 20x10 and the front 20x9 or 20x8?  I like them.
Thanks. They are 20x9.5 all the way around with 275/40/20 tires. They're about 5lbs lighter per corner than stock wheel/tire combo.

Sent from my PH-1 using Tapatalk

Print
Go Up Pages 1 2
User actions