oil all in my intake ?? new engine / turbos & loosing patience with my 13 PP.

68_GT · January 24, 2018, 11:12:45 PM

thanks a million ! my mind is fried stressing over this so I missed that link. I have it all now.

So if my current wiring doesn't have the wires for the updated CKCP sensor how do I fix this ?? Or do I need an updated metal valve cover, PVC, and oil separator ??

ZSHO · January 25, 2018, 10:12:22 AM

I think the CKCP sensor (EGR) feedback pressure Sensor was implemented on the 2015MY -XSPORT IIRC! So No worries!

I just wanted to confirm verify that you did not have that sensor! '
I think you also might need the front vent tube/hose! Z

AA5Z-6758-E - Hose
$12.86

$60.42
AA5Z-6A785-F Oil Separator

$4.86
AA5Z-6A666-D - PCV Valve

https://parts.levittownfordparts.com/oem-parts/ford-separator-aa5z6a785f/?c=Zz1lbWlzc2lvbi1zeXN0ZW0mcz1lbWlzc2lvbi1jb21wb25lbnRzJmk9S0QwOTIxNzUmcj05JmE9Zm9yZCZvPXRhdXJ1cyZ5PTIwMTMmdD1zaG8mZT0zLTVsLXY2LWdhcw%3D%3D

https://parts.levittownfordparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/emission-system-cat/emission-components-scat

68_GT · January 25, 2018, 10:17:46 AM

Pics

68_GT · January 25, 2018, 10:23:29 AM

Pic

68_GT · January 25, 2018, 10:24:27 AM

Pic

68_GT · January 25, 2018, 10:30:22 AM

Pic

ZSHO · January 25, 2018, 11:24:56 AM

The front and rear hose/tube can be had for fairly cheap and would order them just in case your current ones don't fit or reach! Z
Number 11 & 12 needed! On Diagram below l!
Did you happen to check for any codes? Z

https://parts.levittownfordparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/emission-system-cat/emission-components-scat

68_GT · January 25, 2018, 01:05:18 PM

Quote from: ZSHO on January 25, 2018, 11:24:56 AM
The front and rear hose/tube can be had for fairly cheap and would order them just in case your current ones don't fit or reach! Z
Number 11 & 12 needed! On Diagram below l!
Did you happen to check for any codes? Z

https://parts.levittownfordparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/emission-system-cat/emission-components-scat

So basically you are thinking I need to update these parts like the TSB did ?

Colorado-SHOBro · January 25, 2018, 01:13:50 PM

Quote from: 68_GT on January 25, 2018, 10:17:46 AM
Pics

FWIW i looked at my 11' this morning and everything was identical to yours EXCEPT mine does not have the connector that's strapped to the oil separator in the above pic. not sure if that connector might be related to the pcv system or may be the CKCP sensor in question?

Sent from my iPhone using Tapatalk

ZSHO · January 25, 2018, 01:23:23 PM

Quote from: Colorado-SHOBro on January 25, 2018, 01:13:50 PM
Quote from: 68_GT on January 25, 2018, 10:17:46 AM
Pics
FWIW i looked at my 11' this morning and everything was identical to yours EXCEPT mine does not have the connector that's strapped to the oil separator in the above pic. not sure if that connector might be related to the pcv system or may be the CKCP sensor in question?

Sent from my iPhone using Tapatalk

If that was the CKCP Sensor it would be by the front valve cover!
It looks like that strap was put there intentially to keep the wiring @ bay! IMO!
The PCV Valve alone looks beat-up and should be changed! Z

Colorado-SHOBro · January 25, 2018, 01:39:47 PM

Quote from: ZSHO on January 25, 2018, 01:23:23 PM
Quote from: Colorado-SHOBro on January 25, 2018, 01:13:50 PM
Quote from: 68_GT on January 25, 2018, 10:17:46 AM
Pics
FWIW i looked at my 11' this morning and everything was identical to yours EXCEPT mine does not have the connector that's strapped to the oil separator in the above pic. not sure if that connector might be related to the pcv system or may be the CKCP sensor in question?

Sent from my iPhone using Tapatalk
If that was the CKCP Sensor it would be by the front valve cover!
It looks like that strap was put there intentially to keep the wiring @ bay! IMO!
The PCV Valve alone looks beat-up and should be changed! Z

Correct. I should have been more specific. Maybe that is the harness where the CKCP sensor connects to? That connector just stood out to me since i don't have it on my 11 although the pcv/oil separator system is the same as the OP's that he swapped over. Granted his is a 13' so there's probably and array of sensors that set them apart.

I could be totally off but my point being the OP should verify if he has the CKCP sensor or not to make sure all the components are working together in harmony since it's a bit of a Frankenstein.

ZSHO · January 25, 2018, 01:59:24 PM

@ Colorado-SHOBro that was my exact point from the beginning and appreciate you chiming in!

The earlier version of the 2010MY Job 1 IIRC had a heated version PCV which worked as designed! As far as wiring goes! Z

68_GT · January 25, 2018, 05:15:25 PM

My car, valve covers, and PCV everything is the same there's no Frankenstein. The only thing changed is the shortblock which came with the composite valve covers and a different PVC that we didn't use. I wanted to keep the aluminum valance covers and not mess with getting a different quick connect tube for the different PVC nipple location.

I guess basically I need to perform the TSB for my model year ??

Sound right ??

SHOdded · January 25, 2018, 05:17:46 PM

That would be the ideal way to go.

68_GT · January 25, 2018, 05:44:03 PM

So I'll need a composite valve cover on the back side and keep my aluminum on the front side ??