Push Start caved in, trim clips broken

[moem1090]

Hey guys, so my push start just caved in a few days ago. I took the trim piece out to find the button secured by 4 clips. 2 of those broke. I called ford and of course they are not sold seperately but need to buy the whole trim for like $220.00
Anyone experience this or has an idea how i can get replacement clips or a repair thats cost effective?

[glock-coma]

Any pics? Can you use an epoxy to keep it in place?
I've had good experiences
With this.
http://www.devcon.com/products/products.cfm?family=Plastic%20Welder

[moem1090]

Any pics? Can you use an epoxy to keep it in place?
I've had good experiences
With this.
http://www.devcon.com/products/products.cfm?family=Plastic%20Welder

No I don't think an epoxy will work




Sent from my iPhone using Tapatalk

[moem1090]

One is fractured and one completely broke off and fell inside somewhere


Sent from my iPhone using Tapatalk

[AJP turbo]

Next time take it easy with those gorilla sausage fingers

[moem1090]

Next time take it easy with those gorilla sausage fingers

Can't help it, it felt good


Sent from my iPhone using Tapatalk

[pmezo33]

Is this what you need?

http://www.tascaparts.com/ford/taurus/ag1z12a145a/2010-year/sho-trim/3-5l-v6-gas-engine/electrical-cat/ignition-lock-scat/?part_name=ignition-switch

[moem1090]

Is this what you need?

http://www.tascaparts.com/ford/taurus/ag1z12a145a/2010-year/sho-trim/3-5l-v6-gas-engine/electrical-cat/ignition-lock-scat/?part_name=ignition-switch

No the ignition switch is secured underneath by the clips that are attached to the whole trim that goes straight to the glove box

[bpd1151]

Next time take it easy with those gorilla sausage fingers

Ha! Now that's funny.

Sent from my SM-N920V using Tapatalk

[ZSHO]

I would try adding a couple of rubber o-rings behind the push button start to see if you can possibly secure it in place.  Z

[glock-coma]

Can you insert the switch and zip tie around the clips from the back like this.

[glock-coma]

Looks like that clip piece is replaceable. Junk yard will prob be best option. 

[ZSHO]

I was curious if you can possibly remove the 4-torx screws and maybe create,fabricate a plate behind the cover in order to hold and secure the push button start in place on the pic below.
I fortunately had the pleasure in removing and replacing
the instrument cluster on a few occasions which was a fun experience.LOL. Z

[elund126]

My push to start button did the same thing about 6 weeks ago. I was shocked to learn that I can only by the huge trim piece. I wrapped electrical tape around the tabs real tight and haven't had any problems since.