Sealing Airaid Intake (Take 2) Comparison Modded K&N vs Stock VS Modded Airaid

[SHOnUup]

Yes!...I actually am going to wrap the IAT sensor and the tube with reflectix and see what happens.

Sent from my XT1060 using Tapatalk

Almost did! Need this stuff in colors, at least black would be nice. Think using hose clamps would be a good idea too.

[SHOnUup]

Was thinking at least bottom sides towards motor heat thats just roasting those pipes.

[ShoBoat]

Yes!...I actually am going to wrap the IAT sensor and the tube with reflectix and see what happens.

Sent from my XT1060 using Tapatalk

Let us know what happens there, I did something like that on the K&N and it had the undesired effect of holding in the heat. Once heat soak set in, it took forever to cool back down again. But in that case it may have had to due with the pipe being Aluminum and the non cold air it was getting lol.

[ShoBoat]

I wonder if we could use something like this on the outside of the Airaid?

http://www.lord.com//emea/lord-hrc-heat-reflective-coating

[SHOnUup]

I wonder if we could use something like this on the outside of the Airaid?

http://www.lord.com//emea/lord-hrc-heat-reflective-coating

That looks interesting.

Twin turbos deserve twin intakes I feel.

[SHOdded]

Saving on space & monitoring/coordination issues, I think, with single intake.

[ShoBoat]

Saving on space & monitoring/coordination issues, I think, with single intake.

There have been several of these intakes with twin pipes. Take the Hessesey intake. They have not shown a real increase in power. Possibly the issue of hot air again?

[FoMoCoSHO]

Too much cost/complication for no proven power gains.

[SHOnUup]

In the "what would you like in CAI" thread there was mention of rear turbo getting less quality air than the front?

[ShoBoat]

In the "what would you like in CAI" thread there was mention of rear turbo getting less quality air than the front?

I would love to hear how that was determined. And what do they mean by less quality air?

[SHOnUup]

Vague terms I'm using...

[SHOnUup]

Tried some foam insulation for 1/2" water lines.

[SHOnUup]

[ShoBoat]

Sweet idea! How is the seal?

[SHOnUup]

Have to shut hood pretty hard now. Well, can't just drop it from normal spot now. Looks like this would fit real nicely onto the D style stripping. $5 from Menard's for 8'.