Rev Xtreme after market Throttle Body

[SwampRat]

Aftermarket throttle bodies are a popular upgrade among many performance enthusiasts .

First SHO had his modified .... Not sure how .

BBK makes one for the 3.5 EB in the F150 and claim an additional 15 to 20 HP .

I think I saw in a post that Tuner Boost was developing one for the 3.5 EB but I'm can't find the post .

Any one have any experience with this on any other engine ?

I am curious to any other benefits that could be gained .

[SRT82ECOBOOST]

I am going to step out on limb on this one and figure that any component that has to with the air intake to our vehicles is not going to realize any performance gains. Air going is not the problem, it is coming up with the fuel to match that creates the bottleneck.

[bpd1151]

There was no performance gain per se, however.....

FirstSHO did state throttle response was "peppier" FWIW.

Sent from my DROID RAZR HD using Tapatalk

[Frozen Taurus]

What is the diameter of our stock throttle body?

[BiGMaC]

What is the diameter of our stock throttle body?

3" on the SHO and Flex... F150 is different.  Don't know about the XSport
Pics in this post: http://www.ecoboostperformanceforum.com/index.php?topic=2248.msg32460#msg32460

[SwampRat]

What is the diameter of our stock throttle body?

Throttle body measurements are taken on the inside diameter of the TB were it bolts to the intake manifold , not from the outside diameter of the TB inlet .
The 3.5 EB in the F150 uses a 68mm OEM TB and the aftermarket BBK upgrade is 73mm . I'll take the one off my SHO and measure it , as I'm curious .

Stage 3  Motor Sports did an install on a F150 and dynoed it and picked up 14 HP and better throttle response ....

[EcoPowerParts]

Tuner Boost is going to make a CNC TB and I will be the sole distributor once it's available

[SwampRat]

Tuner Boost is going to make a CNC TB and I will be the sole distributor once it's available

Good deal ... I just couldn't find the post...
Any idea on expected gains ?

[bigmoneycloser]

What type of gains?
Will it be available for XSport?
Will it require updated tune?

[EcoPowerParts]

Can't tell you anything until it's built.
It should fit all of the transverse vehicles!
We'll of course test it on BigMac's car

[bigmoneycloser]

Interested!!!!!


Sent from my iPhone using Tapatalk

[DJE624]

Can't tell you anything until it's built.
It should fit all of the transverse vehicles!
We'll of course test it on BigMac's car

BigMac gets to have all the fun!

[SwampRat]

It's great that Mikes getting Vendors to develop new products for us , thank you Mike & Tracy at RX. .... link : http://www.revxtreme.com/index.php?route=common/home

I'm changing the title of the post to reflect ..

[BiGMaC]

Tuner Boost is going to make a CNC TB and I will be the sole distributor once it's available

Good deal ... I just couldn't find the post...
Any idea on expected gains ?

Can't tell you anything until it's built.
It should fit all of the transverse vehicles!
We'll of course test it on BigMac's car

BigMac gets to have all the fun!

Cool.... Mike any preliminary cost estimates from Tracy?

[black99lightning]

It's great that Mikes getting Vendors to develop new products for us , thank you Mike & Tracy at RX. .... link : http://www.revxtreme.com/index.php?route=common/home

I'm changing the title of the post to reflect ..

Clicked the link, not seeing anything.