F150 Big Brake Kit!

EcoPowerParts · December 24, 2013, 03:54:49 PM

This has evolved into a full 16" front brake kit with 6 piston calipers.
Here's some pictures on the FX4. Fit with no problem with factory 20's.
Pricing is $3195 list. I will offer the first kit at my cost to get one out there, just hit me up via PM if you want to be the guinea pig for the kit.
The first kit is ready to go and ship out, just need to fabricate the stainless line (about 1 week turnaround).

SHOdded · December 24, 2013, 07:01:38 PM

That is gorgeous!!! F-150s only, or Explorers too?

BiGMaC · December 24, 2013, 07:05:32 PM

Looks good. and A LOT of brakes!

EcoPowerParts · December 24, 2013, 08:07:24 PM

Quote from: SHOdded on December 24, 2013, 07:01:38 PM
That is gorgeous!!! F-150s only, or Explorers too?

This is an F-150 kit, Explorers already have a kit I thought.

SHOdded · December 25, 2013, 04:49:18 AM

Yes, Explorers have their own kit already (bigmoneycloser as example), but always looking to see if bigger can be had, for looks at least if not for needed performance.

Raiderfan1890 · March 15, 2014, 01:29:01 PM

How much clearance do these need? I have factory 20's but am considering some aftermarket 18's

So much boost it broke my hand

SwampRat · March 15, 2014, 01:46:17 PM

Quote from: Raiderfan1890 on March 15, 2014, 01:29:01 PM
How much clearance do these need? I have factory 20's but am considering some aftermarket 18's

So much boost it broke my hand

Contact Todd at TCE for specifics , his website does say 20" wheels are required.

http://www.tceperformanceproducts.com/f150-2010/kits-45/

Raiderfan1890 · March 15, 2014, 01:53:10 PM

Thanks!

So much boost it broke my hand

SwampRat · March 15, 2014, 02:02:44 PM

Quote from: Raiderfan1890 on March 15, 2014, 01:53:10 PM
Thanks!

So much boost it broke my hand

You can get this even though it is not listed at Mikes store , you might try sending a PM to him ... 4DRHTRD .

I have the TCE / Wilwood kit front and rear ...... love em !
You can double click my signature pic below to see them a little better .

Mikes store link :
http://shop.ecoboostpowerparts.com/Ford-F-150-Ecoboost_c3.htm

explorergotoluvit · March 15, 2014, 02:43:17 PM

bigmoneycloser

can you fit your stock rims on? or do you use spacers? or have you not put your stock ones on since you have a other rims on

SwampRat · March 15, 2014, 02:53:29 PM

Quote from: explorergotoluvit on March 15, 2014, 02:43:17 PM
bigmoneycloser

can you fit your stock rims on? or do you use spacers? or have you not put your stock ones on since you have a other rims on

He is on vacation in Atlantis and may not reply .

OEM. 20" , minimum WILL require the use of a 10mm spacer. Hub centric are best .

http://www.tceperformanceproducts.com/flex-/-sho/kits-23/

explorergotoluvit · March 15, 2014, 03:01:05 PM

no vibrations when using them?

EcoPowerParts · March 15, 2014, 03:08:17 PM

I'm at a wrestling tourney I'll email Frank later

Sent from my SM-N900V using Tapatalk

Raiderfan1890 · March 15, 2014, 03:39:44 PM

Hey no worries Mike. It's the evening so I came here just to see if any forum guys knew anything. Thanks

So much boost it broke my hand

SwampRat · March 15, 2014, 04:02:01 PM

Quote from: explorergotoluvit on March 15, 2014, 03:01:05 PM
no vibrations when using them?

None , IF you get the right ones . I'm fairly certain your bolt pattern is 5 x 114.3 , the important part is the bore size of the OEM wheel . I'm not sure of that.
You need spacers that are hub centric for the Exact Bolt pattern and bore size .