- Currently World’s Fastest Ecoboost SHO
- RotM Winner
-

- Elite Member
- Posts: 1,458
- Boosted
-
- Location: Essex Junction Vermont
- Logged
Like Easton said, I hope everything is ok man! Doing the dyno pull makes sense to start off. And then if need be and clearly hoping not, look deeper like Manu suggested!
I commented on your post about the UPR kit on the length of hose. You just got to disconnect all the hoses, remove the canister from the bracket, run that hose under the IC to TB pipe and between/underneath the compressor lines and get that hose back to where the canister was, connect all lines with it off the bracket and then secure the canister to the bracket.
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World's Fastest Ecoboost SHO
11.063 @ 123.17 MPH! NED 10/10/20