Apparently,  snow has opted to just not make them anymore .. and mine is leaking atrociously unless band-aided up ..

I'd be happy to pay shipping and pay 20$,  STRONGLY prefer a new/unused one..

Snow suggested this :: https://www.snowperformance.net/product-p/sno-809-qc.htm    but it looks to shallow like Pol's for my bung.

Is there a different way to connect the nozzle?


Sent from my iPhone using Tapatalk

Quote from: stealbluesho on February 12, 2018, 06:50:08 PM
Is there a different way to connect the nozzle?


Sent from my iPhone using Tapatalk

They make buttloads of straight connectors.. but .. I made the error of going Quick-Connect and not screw type.  Sooo the tension required to keep the QC snug and not spew pure meth all over the engine bay would rip out of the bung.. or just break the QC and leak all over again.

I thought about using a shim\lock\insert to ''push out/up'' the quick connector instead of using tension to keep the QC locked and sealed but i'm not sure that safe for permanent usage.

I am going to go full crew fittings next year.. i just need to get through this year. 

EVERYONE is out of stock.. to.  And I can't bring myself to buy ebay

I *could* build a connector with QC on one side then go Screw on the other.. i might so that since it would be reusable...

http://www.alcohol-injection.com/en/push-to-connect/284-metal-nozzle-holder-fitting.html .Dunno! Z

Quote from: ZSHO on February 12, 2018, 07:28:39 PM
http://www.alcohol-injection.com/en/push-to-connect/284-metal-nozzle-holder-fitting.html .Dunno! Z

Let me call them .. there order system was wonky and i gave up this morning when ordering the check valve.

sigh .. there website is not taking orders.. and there phone voicemail is frigging full.  I will try tomorrow ..

The more I read about issues with SNOW the more I am thankful that I went with Alky Control...

Might be worth checking out his site to see if he has parts that can replace you lines and nozzles..


Sent from my iPhone using Tapatalk

Quote from: stealbluesho on February 12, 2018, 07:43:14 PM
The more I read about issues with SNOW the more I am thankful that I went with Alky Control...

Might be worth checking out his site to see if he has parts that can replace you lines and nozzles..


Sent from my iPhone using Tapatalk

If I had not done Quick connectors it would have been 'fine' but not ideal .. and braided lines ..

Quote from: ZSHO on February 12, 2018, 07:28:39 PM
http://www.alcohol-injection.com/en/push-to-connect/284-metal-nozzle-holder-fitting.html .Dunno! Z

They have about 10,000 of them.. so i ordered 2 for now   thanks Z..

It is funny everyone else is sold out for months.