So, I'm considering some FIA/fender stripes and rocker stripes to personalize my Explorer, and I'd be curious to get your opinions. I DON'T want to end up with a douche-wagon, so give me your honest feedback.

I dusted off my Photochop skillz and put together some renderings.

Here's my starting point. Not shown is a 1/8" black pinstripe which I plan to remove. It's basically stock, with some dark windows.



The next two renderings include some other minor cosmetic updates (red calipers, film on parking/rear lights and mirror signal lights, black door handles) to give a more finished look. To stay true to the FIA stripe origins, I'd only put them on the driver's side fender. Rocker stripes would go on both sides.

I'm also leaning toward H&R springs, but that change is not show here (i.e. stock ride height).

Primary Black/Secondary Red Stripes


Primary Red/Secondary Black Stripes


I'd do the stripes in vinyl, so if I ever change my mind, they could be easily removed.

Lemme have it!


Sent from my iPhone using Tapatalk

It's a bit much for such a broad sided vehicle

Sent from my XT1650 using Tapatalk

Quote from: Usmcsho on February 12, 2017, 06:24:17 PM
It's a bit much for such a broad sided vehicle

Thanks for the feedback. Be that as it may, I just showed my wife, and she said if I did this, she'd never drive it again.

That alone kind of makes me want to do it. LMAO!!


Sent from my iPhone using Tapatalk

If you just do the fender it might work. But on the doors it makes it look to busy

Sent from my XT1650 using Tapatalk

What's does it look with just the fender? But I like the first one think it's worth doing.

Sent from my Nexus 6P using Tapatalk

Here are both colors with fender only and rocker only:










Sent from my iPhone using Tapatalk

I like the first pick in the original post. Still a little bit flashy but not too overdone. if you want to make it more subtle my suggestion would be to do a thinner red stripe outlining the black and maybe even a shade or 2 darker so it doesn't "pop" quite as much. not a fan of the solid red stripe


Sent from my iPhone using Tapatalk

I prefer the black stripe.

I am just not feeling it on an Explorer. I wish I could be more eloquent on my reason, but I can't. I'm just not feeling it.

Ever think of matte white stripes with a thinner red pinstripe

Sent from my XT1650 using Tapatalk

Quote from: Usmcsho on February 12, 2017, 10:12:32 PM
Ever think of matte white stripes with a thinner red pinstripe

Sent from my XT1650 using Tapatalk

Hadn't crossed my mind, but I'll Photochop it up in the next couple days and see what it looks like! Interesting idea!

Agree with a lot of you guys that the red is too bright.


Sent from my iPhone using Tapatalk

I recall a while back a member with a 14 X-Sport installed some hood "twin turbo" pin stripes which looked pretty darn cool. Z
(Courtesy of Airbornemaikai)

Quote from: Usmcsho on February 12, 2017, 10:12:32 PM
Ever think of matte white stripes with a thinner red pinstripe

Here's a white rendering. White stripes are 6" wide with a 0.5" red stripe on either side, and down the middle. Not too shabby! My ONLY hesitation is that there's no other white on the vehicle, but I do like it.



I also ran a 0.5" white stripe down the rocker with a 0.25" red stripe just below it. It's a lot more subtle than the fat rocker stripes I showed before.

Here's an updated black/red as well. With the smaller rocker stripes.



These two also have the drop simulated for H&R Ex springs.

Quote from: ZSHO on February 13, 2017, 07:59:23 PM
I recall a while back a member with a 14 X-Sport installed some hood "twin turbo" pin stripes which looked pretty darn cool,bottom of the thread. Z
http://www.ecoboostperformanceforum.com/index.php/topic,299.msg58958.html#msg58958

Nice! I do like those, I just wonder if it'd be too over-the-top in addition to stripes.

Appreciate the feedback, guys! Decisions, decisions!


Sent from my iPhone using Tapatalk

Quote from: MiWiAu on February 13, 2017, 09:54:36 PM

Quote from: Usmcsho on February 12, 2017, 10:12:32 PM
Ever think of matte white stripes with a thinner red pinstripe

Here's a white rendering. White stripes are 6" wide with a 0.5" red stripe on either side, and down the middle. Not too shabby! My ONLY hesitation is that there's no other white on the vehicle, but I do like it.



I also ran a 0.5" white stripe down the rocker with a 0.25" red stripe just below it. It's a lot more subtle than the fat rocker stripes I showed before.

Here's an updated black/red as well. With the smaller rocker stripes.



These two also have the drop simulated for H&R Ex springs.

Quote from: ZSHO on February 13, 2017, 07:59:23 PM
I recall a while back a member with a 14 X-Sport installed some hood "twin turbo" pin stripes which looked pretty darn cool,bottom of the thread. Z
http://www.ecoboostperformanceforum.com/index.php/topic,299.msg58958.html#msg58958

Nice! I do like those, I just wonder if it'd be too over-the-top in addition to stripes.

Appreciate the feedback, guys! Decisions, decisions!


Sent from my iPhone using Tapatalk

Oh I was under the assumption your explorer was white... I'd do matte whatever color your truck is lol

Sent from my XT1650 using Tapatalk

Quote from: Usmcsho on February 14, 2017, 07:57:58 AM
Oh I was under the assumption your explorer was white... I'd do matte whatever color your truck is lol

Ahh, okay, that makes more sense then. Thanks!

Mine is "Ingot Silver".



Sent from my iPhone using Tapatalk