February 09, 2023, 06:35:41 AM
collapse
collapse

Author Topic:  High flow PCV valve. UPR  (Read 3878 times)

Offline TimmyATL

  • Full Member
  • *
  • Thank You
  • -Given: 3
  • -Received: 15
  • Posts: 77
  • Ecobooster
  • Liked:
  • Likes Given: 0
High flow PCV valve. UPR
« on: January 07, 2019, 10:50:41 AM »
I see that UPR uses check valves in their catch can set up for the 10-14 SHO. They give a option of a high flow PCV valve. Is this advised to install for best results? Is itjust a hogged out connector? Or just stick with the factory PCV valve. Thanks for all your input. I
13 SHO PP, Airaid intake, 170 T-stat, 3bar map sensor, Ecopower Parts hot side pipes, Turbosmart 7lb wastegate actuators, Stainless Works catted downpipes, Corsa cat back exhaust with Loudvalves exhaust dumps, Alky Control Meth Injection, LMS Dyno Meth tune. TSW Nurburgring  with NItto NTO5

Offline SM105K

  • IG @fafomotorsports
  • Forum Supporters
  • Elite Member
  • *
  • *
  • *
  • Arizona
  • Thank You
  • -Given: 1049
  • -Received: 1224
  • Posts: 1388
  • Thee Forum Cowboy
  • Liked:
  • Likes Given: 31
Re: High flow PCV valve. UPR
« Reply #1 on: January 07, 2019, 11:01:16 AM »
I stuck with the factory PCV, it works great with UPR's catch can.
"M" 2013 SHO PP | AJPTurbo E30 Tune | FS HPFP | Stock IC with Ice Water DIY Sprayer | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Derale Upgraded Trans Cooler | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | AVS Flush Deflector | 802SHO Custom Splitter | Duraflex Chin Spoiler | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber | 411 HP and 546 TQ |

"The Fukus" 2013 Focus ST | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

Offline 802SHO

  • Currently World’s Fastest Ecoboost SHO
  • RotM Winner
  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2431
  • -Received: 1157
  • Posts: 1470
  • Boosted
  • Liked:
  • Likes Given: 7
Re: High flow PCV valve. UPR
« Reply #2 on: January 07, 2019, 01:58:11 PM »
I upgraded my check valve to the billet pro series check valve after talking with one of UPR's reps.  I asked about the difference in check valves and he said the check valve that comes with the kit works great but since I make multiple trips to the track and drive the car so hard and often he recommended I upgrade due to the extened operating time under WOT and boost pressure being over 16psi.  You simply swap it out with the original check valve and its roughly $40. 
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World’s Fastest Ecoboost SHO
11.063 @ 123.17 MPH!  NED 10/10/20

 

* Recent Topics

Re: That's the Brakes
by Faux SHO | February 06, 2023, 11:50:42 PM
Thank you all for your valuable input. I successfully bought & rep...
Re: 2019 SHO extended warranty
by Faux SHO | February 06, 2023, 11:47:34 PM
most if not all dealers do it this way unless you have a working relat...
Re: need solid advice on high flow cat issue.
by ThePresidential | February 05, 2023, 04:59:00 AM
Would it spool up a little quicker?...
Re: I'm getting a P0161 code and new sensors aren't solving the issue.
by Macgyver | February 03, 2023, 12:23:25 PM
How far have you driven it with the code. Sometimes they are historica...
Re: Rear turbo removal
by Roadschool_Dad | February 02, 2023, 12:37:11 PM
Thanks for the great information!  Is there anything special in t...
2023 Special Olympics Fundraiser - Polar Plunge
by bpd1151 | February 01, 2023, 08:29:39 PM
Hoping some of my fellow SHO owners here would consider donating to a ...
Re: *HOW-TO* 2013+ Brakes on a 2010-2012...THEY WORK!!
by timbo | January 31, 2023, 12:01:23 PM
Any reason why this brake upgrade couldn't work on the 2013+ non-...
Re: How to Use Whatever Rear Spring You Want
by Thomks | January 25, 2023, 12:36:42 PM
I absolutely love the track MKS! I just got my MKS recently, and IR...
Re: 802SHO 2010 Build
by 802SHO | January 19, 2023, 12:39:22 PM
So what is the idea on that IC ?  It doesnt look like outside air...
Re: Brake booster check valve
by ThePresidential | January 04, 2023, 04:29:27 PM
Right now mine got down to 3.1 and 3.9, would bad cats affect your LTF...

SimplePortal 2.3.5 © 2008-2012, SimplePortal