MGP Caliper covers for 2013 SHO?

[Scott13SHO]

Over the course of the past couple months I thought I read on the old forum that MGP was producing a set of caliper covers that would fit the 2013 SHO with the Performance package...but I've been on their website a few times and I still don't see any updated info on their website.


Anyone have mroe info?

[geswek]

I will poke you in the eyes if you put those on your car!

They are as bad as a zip infested tween with a NOS sticker on his NA 1983 Civic.

[mjhpadi]

I will poke you in the eyes if you put those on your car!

They are as bad as a zip infested tween with a NOS sticker on his NA 1983 Civic.

Ahh, I have them on my car and I love them, they cut down on dust, are high quality and really clean up the look of the caliper...also it was a lot less work then removing and painting the caliper.  And you don't have to poke me in the eye, I already had a needle in the eye this morning!

[geswek]

Ahh, I have them on my car and I love them, they cut down on dust, are high quality and really clean up the look of the caliper...also it was a lot less work then removing and painting the caliper.  And you don't have to poke me in the eye, I already had a needle in the eye this morning!

SHEESH; I need to get new friends!

[mval]

I agree with Mark completely Ges just wish my wheels spokes were smaller so could see better. I know my buds who go to shows with me love them of course show guys like to go way over the edge.

[Scott13SHO]

I like the way they look but do they fit? LOL


Sent from my iPhone using Tapatalk

[DJE624]

I like them with the SHO on there.  But, now with my hubs, I don't want to over do it. 

[mval]

scott-mine fit well on my 2010 non pp. but i had somebody do it for me as had new rotors & pads put on the same time. what he did & at first i didn't like it was tap the calipher to hold on them on better & they sure do. i just had to touch up the screw to match the red of the cover. what i would do is call them. i know mark had real good luck with their CS as i did when i got the wrong color combo, which was partially my fault& dave will know shortly if it's over kill with the hubs. i think with my spokes so big it'll work, if not out comes the hair dryer that's the great part about decals& ges just to get your goat more i almost put red lug nuts on but decided that was even over the edge for me!!

[Scott13SHO]

They got back with me, and the stock # is 10222. Been trying a find place to get them from now

[mjhpadi]

They got back with me, and the stock # is 10222. Been trying a find place to get them from now

Scott, try here: http://www.carid.com/caliper-covers.html  They don't list one for 2013 but I bet if you contact them, the can get them, and they have the best price...it's where I got mine.

[mval]

Scott:
Only thing to make sure is if you need those wheel spacers to move wheel out a small amount for the front tires. I thing both Mark & I needed them

[Scott13SHO]

I figured as much...thanks for the info.

Sent from my Nexus 7 using Tapatalk 4 Beta

[mjhpadi]

Yes, the spacers were required on any of the 10's that had the brake TSB performed because the TSB moved the calipers outboard a few mm's.  The spacers are 3mm and are not noticeable.

[JoeB]

They do look good, but there's no way I could justify the price for them vs painting them instead.

Sent from my SCH-I535 using Tapatalk 2

[mjhpadi]

They do look good, but there's no way I could justify the price for them vs painting them instead.

Well, I've had them on for almost 2 1/2 years and they have not shown any wear, also the lettering is stamped into the covers, not just painted on.  I felt for the cost, I would have invested more hours into removing the calipers painting them and with past experience with painting calipers, I have never had any luck with the paint not looking kinda dingy after 6 months.