Hey guys,
Thanks to @MiWiAu and @FoMoCoSHO in the AWD shut off post (
http://www.ecoboostperformanceforum.com/index.php/topic,7155.msg109264.html#msg109264), I got to exploring the tools tab of livelink.
Does anyone know if the formula is the same or similar for a FORD 3 bar map as an analog input, as it is for the GM 3-bar (which is loaded in livelink) [GM 3BAR MAP (v*9.78)-14.7]
Thinking it would be a good idea/smart idea to add a 3 bar MAP, if possible a FORD unit, but if not a GM unit, to my 03 mustang turbo project, for logging purposes (the car is a MAF based set-up, but this would allow for more intuitive boost logging).
There are some plug and play kits out there for the aeroforce, etc, but since I have a 2 bar from the SHO that I could test with, and can get a 3 bar for pretty cheap if it is something that could work.
Sorry for the long post and ramblings, just curious.
