Quote from: avidmotion on July 03, 2016, 11:40:22 PM
Is this the piece I would need to splice in a oil separator catch can? I am looking to to run catch cans first on passenger side then one on drivers side....
What type of oil catch can are you going to install?....the above pic posted by Cror1 is the piece that you will need,basically you will need the connector (pictured)above which connects to the factory oil separator while using a 3/8 pvc/oil/gas hose which then connects to the catch can..
.depending on the catch can and the route you want to take, you will definitely need some extra goodies...
1)25ft-3/8 hose.
.2)5/16-1ft hose.cut in 3inch sections used as an adapter/reducer.
3)brass/plastic/nylon straight Barb adapters and best to buy an assortment of sizes such as 3/8..3/4..1/2.. and a few Tee adapters.
.4)1/2 inch hose clamps,..let me know your plans,hope this helps any. BTW add you signature with your vehicle and current mod lists,thanks. Z