*2010 sho pp needs brake kit*

[glock-coma]

As an ending to this thread I just wanted to let everyone know, rotors and rear pads for PP and Non-PP are the same. Both have vented rotors at all for corners. Front pads as depicted in the above EBC Red Stuff pads are slightly different and NOT interchangeable.

Sent from my SM-G900T using Tapatalk

I took that picture,
I'm using the above curved PP pads and my 2010 SHO is not PP.
I can confirm BOTH pads do fit in my caliper just fine.
I ended up returning the straight set back to Amazon. I'll try to find the part numbers.

[nickstewartroc]

When I did the powerstop setup, I used the PP parts on my non-pp SHO, works great!

[SHO T1M3]

As an ending to this thread I just wanted to let everyone know, rotors and rear pads for PP and Non-PP are the same. Both have vented rotors at all for corners. Front pads as depicted in the above EBC Red Stuff pads are slightly different and NOT interchangeable.

Sent from my SM-G900T using Tapatalk

I took that picture,
I'm using the above curved PP pads and my 2010 SHO is not PP.
I can confirm BOTH pads do fit in my caliper just fine.
I ended up returning the straight set back to Amazon. I'll try to find the part numbers.

I stand corrected, sorry guys! :x
Thanks glock-coma for correcting me

Sent from my SM-G900T using Tapatalk

[irondoor19]

If you Do any REAL hard Braking, GO with the EBC Stuff,
Power Stop Did not last for me....as i smoked the front
off the car in under 4K (plus one track day (30 Laps)

Jim T