• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Blend Door Diagnostics?

Started by SHO-Pa, March 31, 2015, 09:45:54 PM

Previous topic - Next topic

SHO-Pa

Does anyone know of a way to test the blend doors? I am getting the tell-tale ticking on the drivers side and want to be sure when I take it in (I would think ESP should cover it).

The flow changes to the defroster, panel and floor ok, but the drivers side seems colder, plus the ticking I hear.

Is there any way I can confirm the blend door isn't functioning properly?
2011 SHO - stock
2016 Explorer XLT 2.3L "4wd"
2018 Focus Titanium

curry67

i had a loud knocking noise that happened what something attached to the blend door went. i forget what it was. I also hear a few random scratching noises coming out of the glovebox and by the pedals less often. I got it looked at they fixed the loud knock but not the scratching/ratcheting noise.

ZSHO

I dont know if you took a look at this thread but may give you some pointers,hope this helps any.Z  http://www.ecoboostperformanceforum.com/index.php/topic,495.0.html


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|