• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Sounds like a bearing hum?

Started by Boggus, June 29, 2014, 06:00:26 PM

Previous topic - Next topic

Boggus

2013 PP SHO.
25k miles

At speed (more so over 65) it sounds like a low him (I describe it as a wheel bearing hum ) from the driver rear wheel.

Anyone experience something similar?
2013 unleashed SHO PP

glock-coma

If it gets louder with steering wheel input its definitely the wheel bearing.
If it gets louder when turning right its the drivers side
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

Boggus

Rear wheel.. Driver side rear wheel makes the noise.  Gets louder as speed increases.  Seems to become noticeable around 60+ mph
2013 unleashed SHO PP

glock-coma

Rear wheels are harder to troubleshoot.  Does the sound  "pulse" or is it constant at speed.
I had an issue last year with a pulsing vibration around 55mph then would almost completely go away around 80.

Ended up being the rear drive unit or RDU. 
It took ford  2 months to figure this out.
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

n8rfastback

I have the same issue. Pulsating vibration above 60 mph.  Definitely driver's side.  My wife wrecked a wheel and tie rod ends on that side last year, and I'm pretty sure that's my issue, so I just ordered a hub.
2010 SHO

Boggus

Ended up being a cupped tire.  Driver side rear, inside cupping on the GY F1's.  I suppose because the car is lowered and the negative camber is making it not wear evenly. 
2013 unleashed SHO PP

Larrylu

Camber both positive and negative will wear tires on the sides inside or outside but evenly....not cupped. Toe wear will cause side to side feathering from scuffing. Sharp edges in one direction when you slide your fingers over the tire from side to side. Cupping is usually associated with balance and some say infrequent rotation.
2010 Loaded, Non PP, Steel Blue Metallic, Livernois Stage 4+, Blacked out grill, Nexus 7 Tablet running Torque Pro

Boggus

Strange indeed.  It's cupped on the driver rear inside tread...when you run your hand over it.  Basically I need a new tire.  At speed the noise drives me crazy.
2013 unleashed SHO PP

Larrylu


Quote from: Boggus on August 24, 2014, 06:32:38 PM
Strange indeed.  It's cupped on the driver rear inside tread...when you run your hand over it.  Basically I need a new tire.  At speed the noise drives me crazy.
Yes it can really howl!  I agree with you a new tire is in order. I would check who balanced that tire for you and make sure they don't balance the new one. I don't know why but I have heard that regular rotation is somehow insurance against that kind of cupping. Since I don't understand why I just regularly do it at each oil change. Got 50K out of my OE Goodyears
2010 Loaded, Non PP, Steel Blue Metallic, Livernois Stage 4+, Blacked out grill, Nexus 7 Tablet running Torque Pro

n8rfastback

I rotate every six months and got 55k out of the stockers
2010 SHO