• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

3rd Cat & Resonator delete w/dual cutouts

Started by shogunal, March 16, 2014, 09:55:05 PM

Previous topic - Next topic

Night Hawk

#15
Quote from: shogunal on March 18, 2014, 12:02:41 AM
NightHawk are you running stock exhaust? I saw the pic and got excited, looks mean. Can't wait to hear that sound clip.
I have a custom catback, still 2 1/4" with xpipe and high flow mufflers welded in. The flanges for the dumps are magnaflow 2.5"  I have eibach springs, so when I run my winter rims/blizzaks 18" It does take due care not to bottom out.  With my stock 20"rims I have had no issue. If I was stock height I don't see any issue. I'll try to post a clip tonight.  I just figured running two turbo's and having two banks of the engine, one dump per exhaust tube would be better served than just a single.
2017 Fusion Sport
GFB DivValve/165* Thermo
K&N Panel/CFM Breather
Ult Perf Int Garrett Core/MKZ oil cooler
FMS 70mm TB/ NGK .026/LMS V6 93

shogunal

Tomorrow my cut outs are being installed. I will post before and after you tube clips of cutouts on stock mufflers, and finally on aftermarket mufflers (this Friday).

Night Hawk

2017 Fusion Sport
GFB DivValve/165* Thermo
K&N Panel/CFM Breather
Ult Perf Int Garrett Core/MKZ oil cooler
FMS 70mm TB/ NGK .026/LMS V6 93

Night Hawk

2017 Fusion Sport
GFB DivValve/165* Thermo
K&N Panel/CFM Breather
Ult Perf Int Garrett Core/MKZ oil cooler
FMS 70mm TB/ NGK .026/LMS V6 93

DJE624

Nice poundings.  I think that Olds took a wrong turn.

Night Hawk

2017 Fusion Sport
GFB DivValve/165* Thermo
K&N Panel/CFM Breather
Ult Perf Int Garrett Core/MKZ oil cooler
FMS 70mm TB/ NGK .026/LMS V6 93

SHOdded

Nice!  Looks like the Mustang was the only one that paced you?
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Night Hawk

Quote from: SHOdded on March 18, 2014, 09:52:22 PM
Nice!  Looks like the Mustang was the only one that paced you?
Yea, I always have a great time, I ended up popping an intercooler hose off which ended up slowing me down lol.  Dumps sound kickass.
2017 Fusion Sport
GFB DivValve/165* Thermo
K&N Panel/CFM Breather
Ult Perf Int Garrett Core/MKZ oil cooler
FMS 70mm TB/ NGK .026/LMS V6 93


SRT82ECOBOOST

@Nighthawk: You have any sound clips of the vehicle at idle/revving with cutouts open and closed?
2013 SHO PP in White Platinum Metallic Tricoat, PPE Downpipes, Livernois Stage V8/3 Bar, Custom 2.5" Catback, 170 T-stat, Airaid CAI, H+R Springs and debadged
Boston Acoustics 2.1 Audio Upgrade

SwampRat

Quote from: SRT82ECOBOOST on March 19, 2014, 06:53:32 AM
@Nighthawk: You have any sound clips of the vehicle at idle/revving with cutouts open and closed?
I think they are boost activated and will not open at idle.
2013 SHO  ....  not mine anymore

2021 Edge ST

SRT82ECOBOOST

Quote from: SwampRat on March 19, 2014, 10:12:54 AM
Quote from: SRT82ECOBOOST on March 19, 2014, 06:53:32 AM
@Nighthawk: You have any sound clips of the vehicle at idle/revving with cutouts open and closed?
I think they are boost activated and will not open at idle.
I understand that they are boost activated, but I would like to hear the sound with them closed at idle and then opening while revving the engine.
2013 SHO PP in White Platinum Metallic Tricoat, PPE Downpipes, Livernois Stage V8/3 Bar, Custom 2.5" Catback, 170 T-stat, Airaid CAI, H+R Springs and debadged
Boston Acoustics 2.1 Audio Upgrade

SwampRat

Quote from: SRT82ECOBOOST on March 19, 2014, 10:15:13 AM
Quote from: SwampRat on March 19, 2014, 10:12:54 AM
Quote from: SRT82ECOBOOST on March 19, 2014, 06:53:32 AM
@Nighthawk: You have any sound clips of the vehicle at idle/revving with cutouts open and closed?
I think they are boost activated and will not open at idle.
I understand that they are boost activated, but I would like to hear the sound with them closed at idle and then opening while revving the engine.
Turbos will not spool up under a no load no boost at idle....
2013 SHO  ....  not mine anymore

2021 Edge ST

SRT82ECOBOOST

Quote from: SwampRat on March 19, 2014, 10:32:14 AM
Quote from: SRT82ECOBOOST on March 19, 2014, 10:15:13 AM
Quote from: SwampRat on March 19, 2014, 10:12:54 AM
Quote from: SRT82ECOBOOST on March 19, 2014, 06:53:32 AM
@Nighthawk: You have any sound clips of the vehicle at idle/revving with cutouts open and closed?
I think they are boost activated and will not open at idle.
I understand that they are boost activated, but I would like to hear the sound with them closed at idle and then opening while revving the engine.
Turbos will not spool up under a no load no boost at idle....
Let's see if I can explain this step by step on how this would go down if Nighthawk was willing to do it:
Step 1: Set up camera behind vehicle and start vehicle to hear vehicle at idle with cutouts closed.
Step 2: Shift into drive and mash gas pedal and listen to vehicle with cutouts open.
Step 3:Post video clip to the forum so we can all enjoy.
2013 SHO PP in White Platinum Metallic Tricoat, PPE Downpipes, Livernois Stage V8/3 Bar, Custom 2.5" Catback, 170 T-stat, Airaid CAI, H+R Springs and debadged
Boston Acoustics 2.1 Audio Upgrade

Night Hawk

#29
Quote from: SRT82ECOBOOST on March 19, 2014, 10:38:53 AM
Quote from: SwampRat on March 19, 2014, 10:32:14 AM
Quote from: SRT82ECOBOOST on March 19, 2014, 10:15:13 AM
Quote from: SwampRat on March 19, 2014, 10:12:54 AM
Quote from: SRT82ECOBOOST on March 19, 2014, 06:53:32 AM
@Nighthawk: You have any sound clips of the vehicle at idle/revving with cutouts open and closed?
I think they are boost activated and will not open at idle.
I understand that they are boost activated, but I would like to hear the sound with them closed at idle and then opening while revving the engine.
Turbos will not spool up under a no load no boost at idle....
Let's see if I can explain this step by step on how this would go down if Nighthawk was willing to do it:
Step 1: Set up camera behind vehicle and start vehicle to hear vehicle at idle with cutouts closed.
Step 2: Shift into drive and mash gas pedal and listen to vehicle with cutouts open.
Step 3:Post video clip to the forum so we can all enjoy.

  I will be bolting up twin dumps new exhaust next week (I cap for the winter thus remove them)  I will be glad to do it for everyone.  My new set up will be with the Corsa cat back fyi. I'll call my new set up the Night Hawk double D's mod lol
2017 Fusion Sport
GFB DivValve/165* Thermo
K&N Panel/CFM Breather
Ult Perf Int Garrett Core/MKZ oil cooler
FMS 70mm TB/ NGK .026/LMS V6 93