GO in my SHO ...

[BiGMaC]

Kevin... Your hotpipes left Albequerque at 9:12am this morning... With any luck you might get them tomorrow. If they get my connection fixed today I'll be back online and get the install pics posted... Plan on working above and below, but you won't need a lift.

[SwampRat]

Kevin... Your hotpipes left Albequerque at 9:12am this morning... With any luck you might get them tomorrow. If they get my connection fixed today I'll be back online and get the install pics posted... Plan on working above and below, but you won't need a lift.

I've got a floor jack and stands and will be good to go.

Hot Pipes did come today  but decided  to hold off  install till  I get them Powder coated RED .

[SwampRat]

Decided that I would get this and ordered today..




http://www.full-race.com/store/ecoboost/ford-ecoboost-v6-throttle-body-spacer-with-boost-ports-1.html


    edit    NO GO   ! Bolt hole spacing off just  a hair   ..

looking for a different option ... we know that the Steeda one fits    . I think I'll get one and drill and tap it for the fittings.



I'm going for a clean install and the 13 OEM BOV's will be removed  ( no vacuum lines to them ) and replaced with a Tial  BOV & 4DR's Hot Pipe  Kit . I will I also install a Boost guage in the center pod console I got from Crash712us  , this will give me two vacuum ports to use .

[SwampRat]

I finally got around to ordering Guages  for the POD I bought from Crash712us.

Auto Meter 2 1/16"  Electrical Analog  --   Water Temp , Transmission Temp  &  Boost  0 -30 psi.   All with Black Bezels and Faceplates and will be modified to have blue illumination .



crash712us  custom center gauge pod



I like the Aeroforce Interceptor but I decided on these because I don't want the OBDII to be dedicated to guages .

I want to leave my MX bluetooth OBDII adapter plugged in for Torque Pro .

[EcoPowerParts]

Decided that I would get this and ordered today..

I hope that fits, not sure that it will, the TB is very close to the valve cover.
If it does fit let me know I'll add it to the store as I'm a Full-Race dealer

[QuickSilver]

Hey Swamp, how come you decided against a combination Vac/Boost gauge instead of boost only?

[BiGMaC]

Decided that I would get this and ordered today..

I hope that fits, not sure that it will, the TB is very close to the valve cover.
If it does fit let me know I'll add it to the store as I'm a Full-Race dealer

Please keep us all informed about fitment... great idea for sure, but I wonder about the space and the difference in construction of the SHO TB compared to the F150 shown as well as fitment of the hotpipes your gonna do. Hope it works for you, but please let us know either way.  TIA

[SwampRat]

Hey Swamp, how come you decided against a combination Vac/Boost gauge instead of boost only?

I'll be running Torque Pro as well to monitor lots of other stuff as well to include vac .

Just trying to keep the Pod layout a little more simpler .

[SwampRat]

This is a pic I took of the HotPipe Kit that 4DR  sells  that I got from BigMac  last week  before I sent them off to get them refinished in RED
4DR ordered a set of RED Silicone Connectors for me as well .

The Pipe with the Round Mounting flange on it is were the Tial BOV goes .




Pics of RED anodized Tial BOV

[SHOdded]

That is one HOT BOV!

[thatsmrgimp2u]

If that tb spacer fits I'll be all over it. Gonna be a good looking engine bay swamp.

Sent from my XT1060 using Tapatalk

[SwampRat]

Hot Pipes Refinished in high temp RED baked enamel finish over the base powder coat.

The small short front turbo to IC inlet pipe was left black because you really can't see it any way .

I'm going to hold off on install until the RED silicone connectors get here .





PPE catless Downpipes will be here tomorrow.

[SHOdded]

Very very nice.

[SwampRat]

Full Race TB Spacer came today .

I'll put the Full Race TB Spacer / 2  port vacuum point  on this evening as well

[MJESHO]

Swamp...........red hot pipes look awesome!!!