It's gauge time!

[geswek]

Right. Now to figure out where to put AFR probe. I don't want to put it on the DP past cat because I'm replacing those.

Can I put it before or after the small X pipe on Corsa?

Sent from my mobile, I think.

[mval]

storm:
I'm not sure where it's taped a shop who had done one before did mine .  I know for sure the egt is taped into the down pipes, as just replaced them & had to retap the PPE's. my afr seems real accurate, atleast that what my guy & his dad said. Normally runs 14.4. Like I said love the gauges, had for about a year now, no problems except the glare & 1 color only was really looking forward to the red at night.
mikev

[geswek]

I'm going to give them a shot; rather spend couple hundred on two gauges and also do my PPE Downpipes together; if they don't pan out I can switch the gauges later.

[mval]

storm:
like i said you'll flat out love them when you can see them & i did get their cone shape item to put over the gauges, which i like alot to. makes them look real good & are cheap. will be interested to know if you get white that it makes a difference. good luck. my PPE install turned out real good once my guy figured out an issue. top class work & when you get old ones off will see how ford smashed originals down & why you get more flow out of these. also i think it then allows the 2 1/2" either corsa or my case borla cat-backs to really do their job of increasing air flow. you also get a little bit more rumble but not bad. still trying to make my wife believe exhaust is stock.
mikev

[geswek]

Haha, can you send pic of shrouds on? I like to see how it looks with Chris center pod.

I'm just doing my a pillar for now.

Sent from my mobile, I think.

[mval]

storm:
Here's the pic of my setup. as my guy says chris's pod is actually too good a fit for our car, it looks like a factory option. i show my car, of course not many people going to shows have seen a gen4 sho, so they just assume it was made with the pod & gauges. that's the only problem w/ digital gauges only real car guys know what they are. this pic was made before i added cones. haven't done one with the cones.
mikev

[DJE624]

Looks good Mike!

[geswek]

I had Chris' pod; sold it to another member.

Do you have photo with the Prosport shrouds on? What's what I wanted to see.

[BiGMaC]

Anybody know if this center pod is still available?

[SwampRat]

Anybody know if this center pod is still available?

PM   Crash712US for details ... he makes them.....took about 3 weeks to get mine .... you'll love it.

[mval]

storm:
no am at work & can't find them on prosports website, which is where i got them. will take a pic tonight & post tomm. I don't have a fancy phone, so have to do it the old fashion way & tom kbeck is right you'll flat out love if chris has any left or is going to make another batch, here's a pic showing it better & thanks dave
mikev

[bigmoneycloser]

Just curious... How much did that cost?

[SwampRat]

Just curious... How much did that cost?

$200.00  with  matte black front insert

[crash712us]

I still make the pods. Pods range from $200-$280. For $200 comes with matte black faceplate for 2013+ or a faceplate the simulates center console trim on 2010-2012's unfortunately it does not photograph well. But to the undiscerning eye it's pretty close match. For $280 pods come with woven aluminum faceplate that matches aluminum trim on dash. All pods are upholstered in matching vinyl.


Sent from my iPhone using Tapatalk

[geswek]

I still make the pods. Pods range from $200-$280. For $200 comes with matte black faceplate for 2013+ or a faceplate the simulates center console trim on 2010-2012's unfortunately it does not photograph well. But to the undiscerning eye it's pretty close match. For $280 pods come with woven aluminum faceplate that matches aluminum trim on dash. All pods are upholstered in matching vinyl.


Sent from my iPhone using Tapatalk

You got any? It won't be until next month for me. DP's are on the list.