What 0-60 times are PP SHO's with DP's and 4+ tune getting?

[Shonuff1140]

Was interested in what consistent 0-60 times the forum is getting on the street that I could look forward to once the warranty runs out on my ride. Appreciate any info in advance.

[BiGMaC]

Why wait to find out the definitive answer?

[crash712us]

I would guesstimate near 4 second or even below. With my setup minus down pipes and coil overs but + meth I have seen 3.8 and lower. Haven't tested with down pipes or with coil overs or even with newly updated tune for that matter.

[steve142857]

Was interested in what consistent 0-60 times the forum is getting on the street that I could look forward to once the warranty runs out on my ride. Appreciate any info in advance.

Based on 1/4 slips, both my 2010 and 2013 ran in the 3.6's when I did runs in the 12.0-12.1 seconds. In the street, with no Wind and with warmer weather, it still should be Under 4 seconds with decent tires when brake/boosting for launches.
I have a few videos on YouTube Under steve142857 if you are interested.

[DJE624]

If you are talking about 0-60 MPH, with the 4+ you should be looking at just under 5 seconds.  I did a 4.9 launching at 2K measured with Torque Pro.

[steve142857]

I think they are a bit faster than that Dave. Not sure how accurate Torquepro is... I got about 5.1sec with only stage 4+ on winter tires with no brake/boost launch and TC on... And that was in the Lincoln MKT that weights 5,200lbs with me in it!
But cool weather helps too if you can get the grip.
The 1/4 in 13.3 for that big sleeper.

[DJE624]

Yeah, you could be right about that Steve.  I've wondered about Torque.  I had a 13.006 1/4 time.  So my 0-60 MPH might be a little deeper into the 4's. 

[TSS]

4.3 With LMS  and Typhoon (debate still out on whether that helps or hinders performance)...launching at 1800 rpm....Lincoln MKS.

[BiGMaC]

Obviously I'm still in process of getting performance mods done. and with the hardware development we're doing it will be slowed more so dynos can be done with changes... but

I had a long phone discussion with Dan at LMS the other day.  He believes with DPs, and CAI the current version 4+ would put me solidly in the 4.3-4.6 range for 0-60. and maybe just a tad better. I won't be able to find out until March or so.

Ford advertised 5.1 second 0-60 for the '13 SHO OEM

[68_GT]

and for those of us with the performance package even faster lol

[DJE624]

4.3 With LMS  and Typhoon (debate still out on whether that helps or hinders performance)...launching at 1800 rpm....Lincoln MKS.

What did you measure that with?

[DJE624]

and for those of us with the performance package even faster lol

You gonna start that again?   

[68_GT]

start what ? lol just saying

[DJE624]

Launch RPMs X speed, divided by boost, X the square root of final drive = 1/4 mile time divided by top end speed.

[steve142857]

Launch RPMs X speed, divided by boost, X the square root of final drive = 1/4 mile time divided by top end speed.

It works for me, but at the end it is divided by trap speed, not top speed! lol
But seriously, you can estimate your 0-60 with our cars being AWD with the 1/4 ET. Roughly:
0-60 in:
12 sec: 3.6-3.7 sec
13 sec: 4.5-4.6 sec.
14 sec: 5.3-5.4 sec.
15 sec: 6.7-6.8 sec.
I had found a link for an Excel spreadsheet that you could put your 60', 330' and 1/8 times and it would give you your 0-60mph that you could validate with the trap speed at 1/8 miles... It worked it was impressive... very accurate!
I will try to find it and put the link soon:
http://forums.corvetteforum.com/c6-tech-performance/2158265-mathematically-based-0-60-mph-calculator.html
Just click on the link and it will bring you there... Very fun to play with. I had my best of 3.6x sec. when I had my 12.0-12.1 runs. Numbers were for my 2013: 1.72, 5.02, 7.75 at 90+mph (going from memory here). Even if my 2013 PP launches faster, my 2010 was still able to manage a faster 0-60 (tuned more aggressively and didn'T have to shift into third to reach 60mph).