bpd1151's 2010 SHO Rebuild Thread....

Bronco2fan · March 03, 2020, 04:04:20 PM

Most definitely the prettiest SHO motor and accessories I've ever seen. Waiting patiently for it all to come together.

Davidsiebert2 · March 05, 2020, 06:36:36 AM

That jet hot coating , is that the plasma ceramic

!! I wanted to try that on my downpipes and my intake manifold to compare temps. Supposed to be 33% increase in heat dissipation compared to traditional ceramic

.

Sent from my iPhone using Tapatalk

bpd1151 · March 05, 2020, 10:33:52 AM

@ DavidS......

I do not know the entire process(es) involved, however I believe there may likely be some information available on their website.

All I do know, is that their 2500 degree coating was not only the highest available, but also the one they specifically recommended for a turbo application design.

Good luck in your research!

Sent from my SM-N950U using Tapatalk

bpd1151 · March 10, 2020, 05:30:30 PM

03/10/20......

Engine builder retrieved numerous parts from powder coater today.

He's leaving most of them packaged up, until ready for install, as he doesn't want to see any of them get damaged.

He did however unpack the intake plenum, as he has to bend the lines and install the individual injectors from the Pro-Meth kit next.

Here's pics of that alone.....

Sent from my SM-N950U using Tapatalk

bpd1151 · March 10, 2020, 07:50:19 PM

All of these parts have been thermal coated from what understand as well. Just added info.

Sent from my SM-N950U using Tapatalk

bpd1151 · March 11, 2020, 01:44:32 PM

03/11/20......

Intake plenum's completed!

I commented to the engine builder that it almost resembles the species of BORG of Star Trek TNG and Voyager fame!

Ha!

Sent from my SM-N950U using Tapatalk

Moisme33 · March 11, 2020, 06:33:50 PM

Quote from: bpd1151 on March 11, 2020, 01:44:32 PM
03/11/20......

I commented to the engine builder that it almost resembles the species of BORG of Star Trek TNG and Voyager fame!

Sent from my SM-N950U using Tapatalk

Before you track it, you should tell your opponents to be prepared to be assimilated! Haha!

J-Will · March 11, 2020, 07:37:29 PM

That is beautiful

Sent from my Pixel 2 XL using Tapatalk

TopherSho · March 16, 2020, 03:30:50 PM

Hey BPD, you a roadkill fan? (subscription required)

https://www.motortrendondemand.com/show/engine-masters/42026332/

Have a look at this ^ .. Any chance your modding the oil pan to avoid windage and or adding in a crank scraper? *If* your going above 7000 rpm might yield some extremely good results.

bpd1151 · March 16, 2020, 04:43:27 PM

@ topher......

It is NOT something I have considered, or even addressed. Some neat info though.

Taken under advisement.

Sent from my SM-N950U using Tapatalk

ZSHO · March 16, 2020, 06:32:57 PM

Quote from: bpd1151 on March 11, 2020, 01:44:32 PM
03/11/20......

Intake plenum's completed!

I commented to the engine builder that it almost resembles the species of BORG of Star Trek TNG and Voyager fame!

Ha!

Sent from my SM-N950U using Tapatalk

I must admit that's truly some quality craftsmanship right there.

It looks like you have a Solenoid in order to keep an equal amount of Methanol distributed to each nozzle correct! To be honest Mine does not line up when compared to yours! Best of luck there bpd1151 on your custom build and Enjoy. Z

nickstewartroc · March 16, 2020, 07:14:49 PM

Quote from: ZSHO on March 16, 2020, 06:32:57 PM
Quote from: bpd1151 on March 11, 2020, 01:44:32 PM
03/11/20......

Intake plenum's completed!

I commented to the engine builder that it almost resembles the species of BORG of Star Trek TNG and Voyager fame!

Ha!

Sent from my SM-N950U using Tapatalk
I must admit that's truly some quality craftsmanship right there. It looks like you have a Solenoid in order to keep an equal amount of Methanol distributed to each nozzle correct! To be honest Mine does not line up when compared to yours! Best of luck there bpd1151 on your custom build and Enjoy. Z

That looks like the stock solenoid for the BPVs I believe

ZSHO · March 17, 2020, 06:46:48 PM

@- nickstewartroc I was referencing to bpd1151 new Direct port setup in (white). The other PIC is my current setup from a few years ago. It looks like they implemented an additional injector along with a Solenoid to control an equal amount of Meth distributed to each injector via outlet of IC! I should of been more descriptive. Thanks. Z

bpd1151 · March 17, 2020, 06:57:47 PM

Quote from: ZSHO on March 17, 2020, 06:46:48 PM
@- nickstewartroc I was referencing to bpd1151 new Direct port setup in (white). The other PIC is my current setup from a few years ago. It looks like they implemented an additional injector along with a Solenoid to control an equal amount of Meth distributed to each injector via outlet of IC! I should of been more descriptive. Thanks. Z

As usual Z......

You my friend are quite observant.

There is a 7th injector that will be being installed closer towards/down by the IC.

The solenoid on top is exactly for what you described. Keep the injectors charged and flowing properly/evenly.

Very good observations.

Sent from my SM-N950U using Tapatalk

ZSHO · March 17, 2020, 07:55:07 PM

Quote from: bpd1151 on March 17, 2020, 06:57:47 PM
Quote from: ZSHO on March 17, 2020, 06:46:48 PM
@- nickstewartroc I was referencing to bpd1151 new Direct port setup in (white). The other PIC is my current setup from a few years ago. It looks like they implemented an additional injector along with a Solenoid to control an equal amount of Meth distributed to each injector via outlet of IC! I should of been more descriptive. Thanks. Z
As usual Z......

You my friend are quite observant.

There is a 7th injector that will be being installed closer towards/down by the IC.

The solenoid on top is exactly for what you described. Keep the injectors charged and flowing properly/evenly.

Very good observations.

Sent from my SM-N950U using Tapatalk

It's something I have considered on numerous occasions.. I would emphasize that you will need to get it tuned properly especially for that additional jet! Sometimes less volume is more. Z