NOTE: The cam lobe for the fuel injection pump must be at Bottom Dead Center (BDC) for the fuel injection pump installation.
Remove the fuel injection pump roller tappet.
- Inspect the fuel injection pump roller tappet, refer to Fuel Injection Pump Roller Tappet Inspection in this section.
Remove the fuel injection pump mounting plate.
Remove the RH front wheel and tire, refer to Section 204-04 .
Position aside the RH fender splash shield, refer to Section 501-02 .
Using the crankshaft pulley bolt, turn the crankshaft until the fuel injection pump cam lobe is at BDC
StealBlue can do this with his eyes closed