May 26, 2020, 01:22:39 pm
collapse
collapse

Author Topic: MrHighCALiber's SHO Forged Engine Build  (Read 207 times)

Online mrhighcaliber

  • Full Member
  • *
  • Thank You
  • -Given: 304
  • -Received: 142
  • Posts: 118
  • Ecobooster
MrHighCALiber's SHO Forged Engine Build
« on: May 22, 2020, 12:17:55 pm »
So one day im on the freeway doing about 70mph, I nail the gas climb to 137 and then acceleration diminishes. Maybe a slight stumble. I jump off the gas and take the next exit. It barely wants to stay running. I pull over and pop the hood, oil exploded every, dipstick blown out with such force that it left an area of the hood insulation damaged.

I could barely keep it running but I limped it home.

Pulled Dtcs. Then a cylinder power balance test. Cylinder 2 wasn't contributing.
 Compression test for cyl 2 3psi.

160-180psi for the rest

So I began pulling the engine/trans and bank 1 cylinder head to find out what was got destroyed.[img width=400 height=300]

Sent from my PH-1 using Tapatalk
« Last Edit: May 22, 2020, 01:35:30 pm by mrhighcaliber »

Offline StealBlueSHO

  • Administrator
  • Elite Member
  • *
  • Thank You
  • -Given: 2525
  • -Received: 2579
  • Posts: 3768
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #1 on: May 22, 2020, 12:33:50 pm »
Yikes!!! I know you have a lot going on with this guy, you should start a thread in the build section!
2016 Taurus SHO Performance Pack, Gearhead Custom Tunes, Gearhead Gen3 Turbos, Gearhead Intercooler, Gearhead 170 Tstat, EPP Dual Feed Intake, EPP Hot Pipes, EPP Ceramic Coated Catted Downpipes, Corsa Exhaust, XDI-35 Fuel Pump, DW In-Tank Fuel Pump, Fuel-It Bluetooth Ethanol Analyzer, HR Lowering Springs, AD Lower Trans Mounts, 3Bar MAP, SP-542 Plugs, Custom SHO Puddle Lights, Custom Gearhead emblem overlays. Best time currently is 11.922 @ 115mph full weight, stock wheels, stock tires... just like it came off the show room floor.

Online mrhighcaliber

  • Full Member
  • *
  • Thank You
  • -Given: 304
  • -Received: 142
  • Posts: 118
  • Ecobooster
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #2 on: May 22, 2020, 12:42:33 pm »
Yikes!!! I know you have a lot going on with this guy, you should start a thread in the build section!
Man. That's what I was trying to do. How do I get this moved?

Sent from my PH-1 using Tapatalk


Offline StealBlueSHO

  • Administrator
  • Elite Member
  • *
  • Thank You
  • -Given: 2525
  • -Received: 2579
  • Posts: 3768
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #3 on: May 22, 2020, 12:54:22 pm »
Yikes!!! I know you have a lot going on with this guy, you should start a thread in the build section!
Man. That's what I was trying to do. How do I get this moved?

Sent from my PH-1 using Tapatalk

Done! Moved to Ecoboost Swaps and Builds -> Vehicle Builds.
2016 Taurus SHO Performance Pack, Gearhead Custom Tunes, Gearhead Gen3 Turbos, Gearhead Intercooler, Gearhead 170 Tstat, EPP Dual Feed Intake, EPP Hot Pipes, EPP Ceramic Coated Catted Downpipes, Corsa Exhaust, XDI-35 Fuel Pump, DW In-Tank Fuel Pump, Fuel-It Bluetooth Ethanol Analyzer, HR Lowering Springs, AD Lower Trans Mounts, 3Bar MAP, SP-542 Plugs, Custom SHO Puddle Lights, Custom Gearhead emblem overlays. Best time currently is 11.922 @ 115mph full weight, stock wheels, stock tires... just like it came off the show room floor.

Offline 4sfed

  • Forum Supporters
  • Full Member
  • *
  • St. Louis, MO
  • Thank You
  • -Given: 110
  • -Received: 44
  • Posts: 99
  • Ecobooster
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #4 on: May 22, 2020, 01:50:00 pm »
That was fun until you mentioned the power going away.

Good luck with the build!  Looking forward to seeing what you have in store.

Sent from my Pixel 4 XL using Tapatalk

Factory Five Mark III, 2004 Mach I donor (gone)
2003 Mustang Cobra 'vert, 456 rwhp, with mods (gone)
2002 MB C32 AMG (gone)
1997 Cobra 'vert, Vortech'd (gone)

Offline 802SHO

  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2068
  • -Received: 993
  • Posts: 1310
  • Boosted
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #5 on: May 25, 2020, 01:03:35 pm »
Also looking forward to your build as it makes progress. 

Sent from my LM-G710VM using Tapatalk

2010 SHO non PP, Tuned by AJP Turbo, Ported GH upgraded turbos, Ported 13+ Exhaust Manifolds, GH upgraded IC, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge.
Highest Trap Speed 123.22 mph
PB 11.368 @ 122.68 NED 10/20/19

Online mrhighcaliber

  • Full Member
  • *
  • Thank You
  • -Given: 304
  • -Received: 142
  • Posts: 118
  • Ecobooster
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #6 on: May 25, 2020, 08:48:42 pm »
Cylinder 2 had some issues. 0psi compression was the main one. Lol

Sent from my PH-1 using Tapatalk


Offline StealBlueSHO

  • Administrator
  • Elite Member
  • *
  • Thank You
  • -Given: 2525
  • -Received: 2579
  • Posts: 3768
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #7 on: May 25, 2020, 08:50:30 pm »
Cylinder 2 had some issues. 0psi compression was the main one. Lol

Sent from my PH-1 using Tapatalk
Wow... thatís narsty lookin...


Sent from my iPhone using Tapatalk
2016 Taurus SHO Performance Pack, Gearhead Custom Tunes, Gearhead Gen3 Turbos, Gearhead Intercooler, Gearhead 170 Tstat, EPP Dual Feed Intake, EPP Hot Pipes, EPP Ceramic Coated Catted Downpipes, Corsa Exhaust, XDI-35 Fuel Pump, DW In-Tank Fuel Pump, Fuel-It Bluetooth Ethanol Analyzer, HR Lowering Springs, AD Lower Trans Mounts, 3Bar MAP, SP-542 Plugs, Custom SHO Puddle Lights, Custom Gearhead emblem overlays. Best time currently is 11.922 @ 115mph full weight, stock wheels, stock tires... just like it came off the show room floor.

Offline 802SHO

  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2068
  • -Received: 993
  • Posts: 1310
  • Boosted
Re: MrHighCALiber's SHO Forged Engine Build
« Reply #8 on: Today at 05:15:44 am »
That's crazy!  Looks like she won't be down for long in your hands though

Sent from my LM-G710VM using Tapatalk

2010 SHO non PP, Tuned by AJP Turbo, Ported GH upgraded turbos, Ported 13+ Exhaust Manifolds, GH upgraded IC, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge.
Highest Trap Speed 123.22 mph
PB 11.368 @ 122.68 NED 10/20/19

 

* Featured Topics

* Recent Topics

Updated Gallery Capabilities
by StealBlueSho | Today at 11:49:44 am
Added the Ecoboosted Gallery and updated the Gallery software to 6.0d....
Ecoboosted Gallery!!
by StealBlueSho | Today at 11:27:31 am
Add a picture of your ecoboost or your favorite ecoboosted picture! It...
Re: Does anyone here have a Taurus 2.0 EB?
by sm105k | Today at 11:19:29 am
Hptuners most likely supports this. Email and ask them. If not they ca...
Re: Transfer case torque limit
by StealBlueSho | Today at 10:20:54 am
My tuner just noticed that I was hitting my transfer case torque limit...
Re: MrHighCALiber's SHO Forged Engine Build
by 802SHO | Today at 05:15:44 am
That's crazy!  Looks like she won't be down for long in...
Re: MRT blues
by FearlessAZ | Today at 04:55:34 am
I agree. The difference from my 2010 SHO to my 2015 MKS feels almost l...
Re: EBPF Under New Ownership!
by 76fomoco | May 25, 2020, 12:19:53 pm
SBS thanks for picking up the torch and keeping this wealth of informa...
Re: EPP CAI
by 802SHO | May 25, 2020, 05:58:21 am
I ordered mine last week and it's sitting on the bench. I figured...
Re: Letís talk weight reduction?!
by 802SHO | May 25, 2020, 05:42:56 am
I think it's worth it for a couple reasons...first being youre fa...
Re: bpd1151's 2010 SHO Rebuild Thread....
by 802SHO | May 25, 2020, 05:27:29 am
Man that flywheel ssssure issss perrrtyyy Sent from my LM-G710VM using...
Re: 802SHO 2010 Build
by 802SHO | May 25, 2020, 05:19:39 am
I would be super intrigued on the 13+ manifolds and how they work out....
Re: Ford Recalls
by BlueSHO | May 24, 2020, 11:16:02 pm
FORD EXPLORER RECALL: SUSPENSION PROBLEMS IN 1.2 MILLION SUVS. Z ...
Re: Brake Cooling Kit
by bpd1151 | May 24, 2020, 07:55:43 pm
None that I've found. Although I do employ the Titanium heat shie...
Re: Performance Oil Pan
by bpd1151 | May 24, 2020, 06:08:01 pm
Hey Everybody. Thanks so much for all of the comments and ideas. After...
Re: What have you done to your Ecoboosted vehicle today?
by StealBlueSho | May 24, 2020, 05:44:23 pm
Just a quick clean with my favorite detailing product!https://uploads....

Back to top
SimplePortal 2.3.5 © 2008-2012, SimplePortal