July 09, 2020, 10:41:34 PM
collapse
collapse

Author Topic: What size filter sock/cover for EPP gen 2 dual filter?  (Read 385 times)

Offline 6500rpm

  • Quality Always Shoots Straight
  • Full Member
  • *
  • the safe zone just outside St Louis
  • Thank You
  • -Given: 45
  • -Received: 100
  • Posts: 122
  • Ecobooster
What size filter sock/cover for EPP gen 2 dual filter?
« on: May 20, 2020, 08:03:33 PM »
With summer here, I'd like to put a sock/cover on my filter (gen 2 EPP duel CAI).
I can ball park the measurements for the filter chart, but if you have a known good  size or part number I'd be interested. The Outerwears filter cover fitment chart is fairly extensive..
2013 SHO PP in Ruby Red Metallic, GTG Billet Grills, Duraflex Racer Chin Spoiler, DriveBright LED Driving/Turn Lights,160 T Stat, MSD Coils, All Royal Purple Lubricants, EPP Gen 2 Duel Intake and hotpipes


Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • New York SHO
  • Thank You
  • -Given: 1935
  • -Received: 4070
  • Posts: 1973
  • Trap Speed of almost 116 mph.
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #1 on: May 20, 2020, 08:43:27 PM »
I used Part Number: 20-1770 for my original version Gen 1 intake and fits like a glove. It should be a good alternative for the Gen 2 intake IMO! Z

https://www.outerwears.com/proddetail.asp?prod=7237
« Last Edit: May 20, 2020, 08:53:52 PM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline 6500rpm

  • Quality Always Shoots Straight
  • Full Member
  • *
  • the safe zone just outside St Louis
  • Thank You
  • -Given: 45
  • -Received: 100
  • Posts: 122
  • Ecobooster
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #2 on: May 20, 2020, 09:15:00 PM »
Thanks Buddy,
It's NASCAR season again

2013 SHO PP in Ruby Red Metallic, GTG Billet Grills, Duraflex Racer Chin Spoiler, DriveBright LED Driving/Turn Lights,160 T Stat, MSD Coils, All Royal Purple Lubricants, EPP Gen 2 Duel Intake and hotpipes


Offline FiveLeeter918

  • Ortiz Performance - Technical Sales
  • Vendor
  • Sr. Member
  • *
  • Tulsa, OK
  • Thank You
  • -Given: 19
  • -Received: 253
  • Posts: 292
  • Bewsted SHO
    • Ortiz Tuning and Performance
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #3 on: May 21, 2020, 12:20:34 AM »
I used Part Number: 20-1770 for my original version Gen 1 intake and fits like a glove. It should be a good alternative for the Gen 2 intake IMO! Z

https://www.outerwears.com/proddetail.asp?prod=7237

This is what I have on mine as well.
- Lee
Technical Sales, Ortiz Tuning and Performance
F-150, Mustang, Lincoln MKS, Taurus SHO and Ford Flex Tuning

Ortiz Performance Vendor Forum | Find us on Facebook! | Shop Today!

Offline 6500rpm

  • Quality Always Shoots Straight
  • Full Member
  • *
  • the safe zone just outside St Louis
  • Thank You
  • -Given: 45
  • -Received: 100
  • Posts: 122
  • Ecobooster
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #4 on: May 21, 2020, 04:17:54 PM »
I used Part Number: 20-1770 for my original version Gen 1 intake and fits like a glove. It should be a good alternative for the Gen 2 intake IMO! Z

https://www.outerwears.com/proddetail.asp?prod=7237

I actually recently saw a picture of  yours over at the SHO board and it jogged my memory. Checked your site but I  didn't see it offered, or did I miss it?
This is what I have on mine as well.
2013 SHO PP in Ruby Red Metallic, GTG Billet Grills, Duraflex Racer Chin Spoiler, DriveBright LED Driving/Turn Lights,160 T Stat, MSD Coils, All Royal Purple Lubricants, EPP Gen 2 Duel Intake and hotpipes


Offline FiveLeeter918

  • Ortiz Performance - Technical Sales
  • Vendor
  • Sr. Member
  • *
  • Tulsa, OK
  • Thank You
  • -Given: 19
  • -Received: 253
  • Posts: 292
  • Bewsted SHO
    • Ortiz Tuning and Performance
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #5 on: May 24, 2020, 02:56:03 AM »
I used Part Number: 20-1770 for my original version Gen 1 intake and fits like a glove. It should be a good alternative for the Gen 2 intake IMO! Z

https://www.outerwears.com/proddetail.asp?prod=7237


This is what I have on mine as well.
I actually recently saw a picture of  yours over at the SHO board and it jogged my memory. Checked your site but I  didn't see it offered, or did I miss it?

We aren't a dealer for Outerwear, we just have a link to it on the EPP listing. HOWEVER, I just heard from a customer today that the sock actually doesn't fit the new AEM filter as it did with the previous S&B filter, and looking at their catalog I can't find one that will fit the Gen 2.
- Lee
Technical Sales, Ortiz Tuning and Performance
F-150, Mustang, Lincoln MKS, Taurus SHO and Ford Flex Tuning

Ortiz Performance Vendor Forum | Find us on Facebook! | Shop Today!

Offline StealBlueSHO

  • Administrator
  • Elite Member
  • *
  • Thank You
  • -Given: 2651
  • -Received: 2708
  • Posts: 3867
  • I poke at BPD1151
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #6 on: May 24, 2020, 03:50:19 PM »
I used Part Number: 20-1770 for my original version Gen 1 intake and fits like a glove. It should be a good alternative for the Gen 2 intake IMO! Z

https://www.outerwears.com/proddetail.asp?prod=7237


This is what I have on mine as well.
I actually recently saw a picture of  yours over at the SHO board and it jogged my memory. Checked your site but I  didn't see it offered, or did I miss it?

We aren't a dealer for Outerwear, we just have a link to it on the EPP listing. HOWEVER, I just heard from a customer today that the sock actually doesn't fit the new AEM filter as it did with the previous S&B filter, and looking at their catalog I can't find one that will fit the Gen 2.

Do you think a sock it worth it?
2016 Taurus SHO Performance Pack, Gearhead Custom Tunes, Gearhead Gen3 Turbos, Gearhead Intercooler, Gearhead 170 Tstat, EPP Dual Feed Intake, EPP Hot Pipes, EPP Ceramic Coated Catted Downpipes, Corsa Exhaust, XDI-35 Fuel Pump, DW In-Tank Fuel Pump, Fuel-It Bluetooth Ethanol Analyzer, HR Lowering Springs, AD Lower Trans Mounts, 3Bar MAP, SP-542 Plugs, Custom SHO Puddle Lights, Custom Gearhead emblem overlays. Best time currently is 11.922 @ 115mph full weight, stock wheels, stock tires... just like it came off the show room floor.

Offline FiveLeeter918

  • Ortiz Performance - Technical Sales
  • Vendor
  • Sr. Member
  • *
  • Tulsa, OK
  • Thank You
  • -Given: 19
  • -Received: 253
  • Posts: 292
  • Bewsted SHO
    • Ortiz Tuning and Performance
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #7 on: May 29, 2020, 01:25:22 AM »
I used Part Number: 20-1770 for my original version Gen 1 intake and fits like a glove. It should be a good alternative for the Gen 2 intake IMO! Z

https://www.outerwears.com/proddetail.asp?prod=7237


This is what I have on mine as well.
I actually recently saw a picture of  yours over at the SHO board and it jogged my memory. Checked your site but I  didn't see it offered, or did I miss it?

We aren't a dealer for Outerwear, we just have a link to it on the EPP listing. HOWEVER, I just heard from a customer today that the sock actually doesn't fit the new AEM filter as it did with the previous S&B filter, and looking at their catalog I can't find one that will fit the Gen 2.

Do you think a sock it worth it?

I didn't have one to start until I was driving on the highway in torrential rain and my CEL started flashing like crazy and wouldn't go above 2500 rpm in any gear. Had to limp the car 5 miles to my exit, then it cleared up idling at the stop light. Chalked it up as a fluke from the rain, but the next big rainstorm it happened again.

Mike suggested the one above, and I haven't had an issue since. Added bonus it's washable and my filter is still pristine after nearly a year installed.
- Lee
Technical Sales, Ortiz Tuning and Performance
F-150, Mustang, Lincoln MKS, Taurus SHO and Ford Flex Tuning

Ortiz Performance Vendor Forum | Find us on Facebook! | Shop Today!

Offline StealBlueSHO

  • Administrator
  • Elite Member
  • *
  • Thank You
  • -Given: 2651
  • -Received: 2708
  • Posts: 3867
  • I poke at BPD1151
Re: What size filter sock/cover for EPP gen 2 dual filter?
« Reply #8 on: May 29, 2020, 01:06:50 PM »
I used Part Number: 20-1770 for my original version Gen 1 intake and fits like a glove. It should be a good alternative for the Gen 2 intake IMO! Z

https://www.outerwears.com/proddetail.asp?prod=7237


This is what I have on mine as well.
I actually recently saw a picture of  yours over at the SHO board and it jogged my memory. Checked your site but I  didn't see it offered, or did I miss it?

We aren't a dealer for Outerwear, we just have a link to it on the EPP listing. HOWEVER, I just heard from a customer today that the sock actually doesn't fit the new AEM filter as it did with the previous S&B filter, and looking at their catalog I can't find one that will fit the Gen 2.

Do you think a sock it worth it?

I didn't have one to start until I was driving on the highway in torrential rain and my CEL started flashing like crazy and wouldn't go above 2500 rpm in any gear. Had to limp the car 5 miles to my exit, then it cleared up idling at the stop light. Chalked it up as a fluke from the rain, but the next big rainstorm it happened again.

Mike suggested the one above, and I haven't had an issue since. Added bonus it's washable and my filter is still pristine after nearly a year installed.
Interesting?? Think you were ingesting water?


Sent from my iPhone using Tapatalk
2016 Taurus SHO Performance Pack, Gearhead Custom Tunes, Gearhead Gen3 Turbos, Gearhead Intercooler, Gearhead 170 Tstat, EPP Dual Feed Intake, EPP Hot Pipes, EPP Ceramic Coated Catted Downpipes, Corsa Exhaust, XDI-35 Fuel Pump, DW In-Tank Fuel Pump, Fuel-It Bluetooth Ethanol Analyzer, HR Lowering Springs, AD Lower Trans Mounts, 3Bar MAP, SP-542 Plugs, Custom SHO Puddle Lights, Custom Gearhead emblem overlays. Best time currently is 11.922 @ 115mph full weight, stock wheels, stock tires... just like it came off the show room floor.

 

* Recent Topics

Re: Kill of the week
by ridered74 | Today at 10:22:09 PM
Second week in a row I had the pleasure of racing a mustang. This one ...
Re: '14 Explorer Sport greetings from Charlotte NC
by PDSHO | Today at 06:58:18 PM
Greetings from Nebraska.Greg...
Re: New member central pa
by PDSHO | Today at 06:54:59 PM
Greetings from Nebraska.Greg...
Re: New member Omaha, Nebraska
by PDSHO | Today at 06:52:20 PM
Greeting and welcome from another Nebraskan.I live between Omaha and F...
Re: Has anyone install custom Hood?
by 6500rpm | Today at 03:57:41 PM
I put the chin spoiler  on my 13, required a little profiling in ...
Official Instagram and Twitter Pages
by StealBlueSho | Today at 12:34:03 PM
Things have been crazy outside of the ecoboost world for me but I have...
Re: SBS 2016 Taurus SHO Build Thread
by ridered74 | July 08, 2020, 11:10:23 PM
So I had Gearhead center cap overlays on my stock wheels... and missed...
Re: Ride of The Month - July 2020!!
by Dxlnt1 | July 08, 2020, 10:29:41 PM
That doggone BPD guy shattered my build tho lol.Sorry......Sent from ...
Re: What have you done to your Ecoboosted vehicle today?
by StealBlueSho | July 08, 2020, 09:05:33 PM
https://uploads.tapatalk-cdn.com/20200708/36af6e707bd7f56f9890812e7098...
Re: Meth Switch and Relay lifespan?
by 76fomoco | July 08, 2020, 06:00:04 PM
if your not meth dependent I wouldn't worry about it. But for the...

Back to top
SimplePortal 2.3.5 © 2008-2012, SimplePortal