August 05, 2020, 09:29:04 AM
Welcome to the Ecoboost Performance Forum

* Ecoboost Performance Forum Ride of The Month July 2020!!

Congratulations Dannymack and 802SHO!!

* Ecoboosted Pictures!

July 05, 2013, 02:05:45 PM by bpd1151
Views: 124681 | Comments: 6

The following step-by-step "How-To" details the measurements I came up with to re-position the TAURUS trunk badge lettering.

I opted to perform this mod because I thought that the final outcome was more much complimentary to the SHO's overly large rear end.

You should compile the following tools to assist you in completing this project:

1 Grease "Stabilo" Type Pencil
1 X-acto knife / razor
1 Measuring Tape
1 Roll of Blue Pa
July 05, 2013, 02:24:57 PM by bpd1151
Views: 13567 | Comments: 0

**** Below is a "How-To" Tutorial on removing the old, 2010-2012 style side fender badging that has the verbiage 'TAURUS' molded into them, and instead, upgrading to the newer, 2013+ fender badging that has the 'SHO' verbiage.

This write up, as it appears below, was originally posted in another community, of which I am also a staff member of.

The user name for this creator is/was: "Unknown_Driver".

Therefore, thanks a
July 05, 2013, 01:38:15 PM by bpd1151
Views: 15590 | Comments: 4

Below are the steps I took to convert over my entire interior from the standard, factory installed incandescent type bulbs, over to LED's.

It is important to note, that this mod was performed on my 2010 SHO, and others have since found out, there are, or may be, variations in the lamp housing assemblies, depending on model year owned, and/or what option pkg's were ordered.

Although generally speaking, the procedures are very similar, if not the ...
July 05, 2013, 03:36:51 PM by bpd1151
Views: 9985 | Comments: 3

****Below is the info/install steps used to install aftermarket downpipes on your 3.5L V6 Eco Motor.....

This post originally appeared in another community of which I am also a staff member of.

All thanks goes out to the creator, who's user name there was: jdeprato****

Moving along, here is the info as it originally appeared:

Items Needed/Pre-install check...
July 05, 2013, 03:18:22 PM by bpd1151
Views: 19311 | Comments: 15

****Fellow EBPF member EcoBrickBob asked me to kindly transfer over his write-up on his Methanol Injection Set Up, that is offered up by Official EBPF Vendor Unleashed Tuning.

Thanks and kudos goes out entirely to EBB for having posted this info for all fellow EcoBoost owner's to take advantage of.....****

Moving along, below is EBB's post as it appeared elsewhere:

This ...
Pages: 1 2 [3] 4 5 6
Welcome, Guest. Please login or register.

Click button to donate to EBPF

Donations for Saving EBPF!

* Top Topics

Back to top
SimplePortal 2.3.5 © 2008-2012, SimplePortal