All updated from info received.....
Size of the emblem is 4.5625" wide x 0.5625" tall x 0.1875" thick (at the tallest point). Actual measurements can vary by up to 0.020" or so depending on powder thickness. All emblems will come with VHB emblem adhesive on the back unless otherwise specified.
What might be easier would be to just have anyone interested in purchasing one shoot me an email directly to chris@yourlittlecncshop.com with what they're wanting.
So just to clarify on pricing with a couple of possible examples:
If I were to pull the badge off of my CNC mill and stuff it into a padded envelope with no powdercoating, that will cost $30 (shipping is free to the 48 states):
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zps2er0fwfd.png) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zps2er0fwfd.png.html)
If I were to powdercoat the badge black and then leave the letters raw machined with no color (perfect for Plastidip!), that would count as one color and would cost $45 ($30 + $15), shipped
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zpsd13mjnlo.png) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zpsd13mjnlo.png.html)
If I were to leave the badge face alone and powdercoat the letters in 3 colors, that would cost $75 ($30 + $15 + $15 + $15), shipped:
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zpskty9jh0e.png) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zpskty9jh0e.png.html)
And the one I showed you earlier with the black face, machined 3.5L, blue Eco, green Beast would be the same as above since there are 3 colors: $75 shipped.
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zpsvncettlv.png) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zpsvncettlv.png.html)
Nobody is limited to those color schemes. The set I did for one of my buddies here was done in red/silver/red ($30 + $15 + $15):
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zpsc7dcskn8.png) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zpsc7dcskn8.png.html)
The badge itself is machined from 6061-T6 aluminum. This is aerospace grade alloy. Not as strong as 7075, but definitely overkill for this application.
.: All of the powders I use for emblems are UV-stable polyurethanes. They're very durable and like the aluminum they've bonded to, will likely outlast the car. For those who are in areas where salt spray is a concern, these powders are rated for ~3,000 hours of salt spray exposure before degradation happens.
NO ... RULE ... BREAKING!!! :D Like the emblems, nice work. Are they durable?
It's fine, you can post his info in this thread, no problem. Falls under word-of-mouth, inter-member discussion, etc.
If he wants to join the forum & showcase his wares, then we will set up a vendor area just for him. That will also become the area for questions/feedback specific to his company/products. There are no fees involved, but we do ask the vendor be committed to the products & their customers.
These look pretty cool....any worries about that name being trademarked?
Sent from my SM-N920V using Tapatalk
Those look cool! I like it!
Sent from my iPhone using Tapatalk
Nice! Is this just out on Ebay right now? Curious about the size.
Any links to buy them?
I will update all the info as soon as I hear back from Chris today. I will update the original post with all info needed
I'd be in to buy a set.
Are you the guys that hold the trademark? Just wondering here, because I'm pretty sure it was trademarked and that could cause some legality issues...thx
Sent from my SM-N920V using Tapatalk
First post updated!!!
I'm like ngk the black & red! Will be in contact when I get paid.
Sent from my iPhone using Tapatalk
I like! Just need to decide on which option...
Is this the same size as the ecoboost badge on the Taurus SHO? I don't have the SHO yet so I can't measure it, but I definitely want one of these badges for when I do get my SHO
I believe these are a bit larger. And 66 Gal... I hear ya. It's super hard to decide but used my photoshop on my phone and tried a bunch of diff colorways. Finally settled and ordered mine already. Went with this colorway:
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zpsyb2xqxqh.jpeg) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zpsyb2xqxqh.jpeg.html)
Checked out his site and like the license plate frame he does too.
http://yourlittlecncshop.com/index.php?route=product/product&product_id=61 (http://yourlittlecncshop.com/index.php?route=product/product&product_id=61)
Hey Chris, sent you an e-mail. I want one!
Got my emblem today. Super nice and already backed with 3m tape. Gonna wait till after winter to put it on. Here's a pic.
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zps9mrq3qpb.jpeg) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zps9mrq3qpb.jpeg.html)
And size comparison to stock flex emblem.
(http://i886.photobucket.com/albums/ac68/Sabtaj1/Mobile%20Uploads/image_zpswhl3kagw.jpeg) (http://s886.photobucket.com/user/Sabtaj1/media/Mobile%20Uploads/image_zpswhl3kagw.jpeg.html)
Envious :thumb:
Looks great! I just need to decide colors so I can order one up.
Mine's just finished. Custom size, custom text, contoured to fit the trunk shape. I should get it soon. It's a pleasure to work with Chris!
(http://i1152.photobucket.com/albums/p499/larry114/F27F28E4-8C44-415B-B370-CDD1ED10B4BE_zpsuuqkafup.jpg) (http://s1152.photobucket.com/user/larry114/media/F27F28E4-8C44-415B-B370-CDD1ED10B4BE_zpsuuqkafup.jpg.html)
That's awesome. I love it!!! I really like the gloss black. I guess I should said gloss. oops. May have to do another. LOL. she's a beaut Clark!!!
Got mine and installed yesterday. Before installation I documented the amount of curve Chris machined into the back.
(http://i1152.photobucket.com/albums/p499/larry114/195210f8a1a3c358de210dbcfc7ac9a3_zpsx1fxqfiq.jpg)
End result
(http://i1152.photobucket.com/albums/p499/larry114/5322b392ab2c03e30c449764c6175724_zpsdfcdytwv.jpg)
Got to say Chris has been an absolute pleasure to work with. I felt in the loop at all times totally involved with the decision process. For a truly custom creation Chris' product is truly a bargain. I can't remember ever enjoying a creative collaboration more. Big thanks to Chris!
2010 Stl Bl Met, Loaded, non PP, LMS 4+X, K&N drop in, 170 T-stat, 3 bar MAP, SP534
Looks great! He does very nice work.