Ecoboost Performance Forum

Detailing, SYNC, AV, Security, Electrical, and Lighting => Exterior Modifications => Topic started by: 92BlackGT on July 07, 2015, 11:08:45 AM

Title: ughh, tail lamp water
Post by: 92BlackGT on July 07, 2015, 11:08:45 AM
i bought my SHO about 6 weeks ago and i thought i did a good job of finding the issues a used car has and getting the dealer to fix them. well, i missed one... and a big one at that. my driver side outer tail light has a crack and it let in a ton of water during the recent rain storms. my turn signal started flashing really fast indicating a blow bulb and then noticed the brake light isn't working. I found the crack in the lens (how i didn't see it at the dealer is beyond me) and found an ocean of water inside the lens :(

(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zps2zaerljo.jpg)

unfortunately, a new tail lamp assembly from Ford (tasca) is $621, rockauto is $563 and LKQ is $400. i found one on ebay for $336 shipped so i bought that.
getting the lamp assembly out is simple.
disconnect the grey connector and remove the 3 nuts.

(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zpst20eb5cd.jpg)

then just pull on the black grommet and the wires will come loose.

(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zpsznlawlno.jpg)

that brown goo by the trunk support strut was under the black plastic of the tail lamp assembly. it was a slimy, nasty film.
Title: Re: ughh, tail lamp water
Post by: jtoddk98 on July 07, 2015, 11:14:32 AM
Just the outer one was bad? I see them on eBay all the time under $150


Sent from my iPhone using Tapatalk
Title: Re: ughh, tail lamp water
Post by: SHOnUup on July 07, 2015, 11:27:08 AM
The outers are easy to find at junk yards too...it's the inners that are hard to get, usually sold with trunk lid.

Rich

Title: Re: ughh, tail lamp water
Post by: 92BlackGT on July 07, 2015, 08:31:59 PM
i've seen a ton of inner for around $100ish. the outer/quarter mount are 'spensive... '13+
Title: Re: ughh, tail lamp water
Post by: 92BlackGT on July 10, 2015, 01:20:14 PM
got the new tail light in so i decided to take apart the old assembly to see what was inside.
here are some gee-whiz photo's

lense removed (shattered)
(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zpswyyddqeu.jpg)

innards removed
(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zpsunzvm4xr.jpg)

some inner bezel removed
(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zps3st1ivax.jpg)

electronics separated
(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zpsvjvqndxy.jpg)

close up of electronics
(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zpsmrx95ejp.jpg)

a look at the tiny LED's for the turn signal. crazy how bright they are
(http://i54.photobucket.com/albums/g92/92blackgt/temporary_zpspj8bxt6m.jpg)

i was bored and wanted to see what was up inside there, that's all.
Title: Re: ughh, tail lamp water
Post by: JagerBomb on July 10, 2015, 01:28:30 PM
This is a great time to experiment with adding or styling your lights with new and cool stuff.
Title: Re: ughh, tail lamp water
Post by: curry67 on October 14, 2015, 09:53:58 PM
if i remember right my sel 2010-12 tails were only 300 its amazing how much those led lights cost.
EhPortal 1.39.5 © 2025, WebDev