Ecoboost Performance Forum

Ecoboost Performance => General Discussion => Topic started by: ElvenSho on June 27, 2015, 11:32:02 AM

Title: Anyone have Torries 3" non-catted DPs?
Post by: ElvenSho on June 27, 2015, 11:32:02 AM
How do they sound on a stock exhaust? Is there a good power difference from stock or with a tune? I noticed some other companies have 2.5" so I am assuming the 3" will give more power tuned as it lets the car/turbos exhale better, am I correct with my assumption? How is the quality? Is there a lot of fuel smell on a stock exhaust?

Sent from my SM-N910V using Tapatalk

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: EcoPowerParts on June 27, 2015, 11:54:19 AM
The key is you're hooking 3" downpipes to a a stock exhaust, your neck down stops the increase in power. Nobody has tested them head to head with a 2.5" but our 2.5" can support up to 400WHP per pipe, our own Flex used our catted pipes to make 600WHP, still the record for highest HP stock engine ecoboost.

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: ElvenSho on June 27, 2015, 04:18:48 PM
Quote from: EcoPowerParts on June 27, 2015, 11:54:19 AM
The key is you're hooking 3" downpipes to a a stock exhaust, your neck down stops the increase in power. Nobody has tested them head to head with a 2.5" but our 2.5" can support up to 400WHP per pipe, our own Flex used our catted pipes to make 600WHP, still the record for highest HP stock engine ecoboost.
I dont plan to ever have that kind of power(600 whp)but I just want the best gains from dps thats possible. I do plan to upgrade turbos down the line if/when mine give out tho so its best to go with 3" I guess.

Sent from my SM-N910V using Tapatalk
Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: EcoPowerParts on June 27, 2015, 04:30:35 PM
Of you have 3" and connect to 2.5 your smallest point is 2.5 negating the 3" down pipe

Sent from my SM-N910V using Tapatalk

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: EcoPowerParts on June 27, 2015, 04:39:25 PM
BTW, the 600 whp was with the ATP turbo upgrade, basically that abs a compressor wheel upgrade are the only options.  The ATP maxes out at approx 600WHP according to the manufacturer,  this means that the carted 2.5" pipes are not a restriction for the turbos.

Sent from my SM-N910V using Tapatalk

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: ElvenSho on June 27, 2015, 08:51:04 PM
Quote from: EcoPowerParts on June 27, 2015, 04:39:25 PM
BTW, the 600 whp was with the ATP turbo upgrade, basically that abs a compressor wheel upgrade are the only options.  The ATP maxes out at approx 600WHP according to the manufacturer,  this means that the carted 2.5" pipes are not a restriction for the turbos.

Sent from my SM-N910V using Tapatalk
Will you have any special sales on the dp sometimes within the next month?

Sent from my SM-N910V using Tapatalk

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: EcoPowerParts on June 27, 2015, 08:51:41 PM
Nothing planned,  sorry

Sent from my SM-N910V using Tapatalk

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: Gray Brick on June 28, 2015, 11:29:38 AM
I have Torrie 3" pipes... huge power difference.

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: ElvenSho on June 28, 2015, 01:12:44 PM
Quote from: Gray Brick on June 28, 2015, 11:29:38 AM
I have Torrie 3" pipes... huge power difference.
Good to know. Is it low end along with top end?

Sent from my SM-N910V using Tapatalk

Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: BiGMaC on June 28, 2015, 08:25:41 PM
Quote from: ElvenSho on June 28, 2015, 01:12:44 PM
Quote from: Gray Brick on June 28, 2015, 11:29:38 AM
I have Torrie 3" pipes... huge power difference.
Good to know. Is it low end along with top end?

Sent from my SM-N910V using Tapatalk


... Huge power difference should be expected with any good DP... Was your difference compared to OEM?
Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: Gray Brick on June 29, 2015, 02:01:35 AM
No dyno numbers yet.  Hard to find a 4 wheel dyno in my area.
Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: 2012SHOoff on June 29, 2015, 05:49:02 AM
I have them and love them power and sound
Title: Re: Anyone have Torries 3" non-catted DPs?
Post by: SHOdded on June 29, 2015, 06:11:22 AM
There will be some clearance issues (but will fit) with the larger diameter downpipes, here's how to take care of them:
http://www.ecoboostperformanceforum.com/index.php/topic,4701 (http://www.ecoboostperformanceforum.com/index.php/topic,4701)
EhPortal 1.39.5 © 2025, WebDev