someone run whith this?, how wide is the OEM rim 20''
the overall diameter oem tire is 28.7 , AND NITTO 275/40R20 is 28.8
I 'd like to know if the tires are properly fit on the Taurus(clear suspention no friction )
for the flex also , I would like to install too (29.1 overall diameter)
Factory rim is 7.5". shoe Horning a 275 on that narrow of rim won't give a good tire foot print. The tread will wear out in the middle.
Sent from my iPhone using Tapatalk
ok thanks, the Pirelli P zero summer performance tire have 220 treadwear, other brand offered?
I believe 255 is the widest width to go on a 7.5" wide rim. 275's will fit under the car. Just not on your rims.
Sent from my iPhone using Tapatalk
Isn't OEM 20x8? The best known/used widths for the 275's is 9.5 for all around fit or 10 in the rear only. Maybe you could get away with raising tire pressure above recommended levels on a stock rim to get the tread to wear evenly, but probably not the best you could get from the tire.
That's what I thought for a long time too. That they where 8" but they where measured at 7.5.
Sent from my iPhone using Tapatalk
THE BEST WAY For me now , buy a pirelli p- zero standard size
In the summer I run mickey thompson DR's
what size do you use?
Quote from: crash712us on November 21, 2014, 01:13:14 PM
Factory rim is 7.5". shoe Horning a 275 on that narrow of rim won't give a good tire foot print. The tread will wear out in the middle.
Sent from my iPhone using Tapatalk
I run 275x40x20 all around on 20x8.5 rim buy American racing. I had my dealer put them(275x40x40) on my stock wheel and the tire deformed across the contact packet. Would not recommend using stock wheels with these tires!
(http://www.ecoboostperformanceforum.com/gallery/55_20_09_13_3_38_26.jpeg)