Ecoboost Performance Forum

Ecoboost Performance => Performance => Topic started by: MeanKS on March 24, 2014, 09:39:03 AM

Title: Spring Installation?
Post by: MeanKS on March 24, 2014, 09:39:03 AM
who did you all get to install your springs?  how long did it take and how much did it cost?  do you recommend new shocks as well?

just trying to get a sense of what to expect.  because i'm definitely going to get some lowering springs, probably H&Rs since they make a spring specifically for the MKS, maybe Eibach.

i was unsure until recently;  after i got the car back from the dealer i noticed the ride was even more silky smooth than it was before.  i don't mind that, but theres hardly any feel now!  the car just effortlessly glides over everything, it still handles quite well for its size.  the dealer replaced a failed wheel bearing that was making louder and louder noises.  at first i thought it was chopped tires, but that ended up not being the case.  perhaps the very lowlevel vibration that i felt when i got the car was the bearing begginning to go bad.  at the time is just felt like 'feel' coming from the road, and i liked that until the loud noise starting to erupt.

so i'm thinking some lowering springs will produce some feel and better handling without affecting the ride too much.  given the way the car rides now, theres plenty of margin to stiffen up the ride w/o making it harsh...
Title: Re: Spring Installation?
Post by: DJE624 on March 24, 2014, 09:45:46 AM
Springs will firm it up for sure.  It should take 2-3 hours maybe.  You should have no problem with the stock shocks but make sure you get an alignment as soon as possible. 
Title: Re: Spring Installation?
Post by: bykr on March 24, 2014, 10:31:03 AM
I did mine with a friend and it took about 3 hrs. with some issues(as usual).I kinda like the ride better before.Now if you see something like a bump or dip you've got to slow down.Before it would just cruise over stuff like you described.But it looks way better!BTW, I haven't done an alignment (waiting for new tires) but I haven't noticed any change in the steering/handling,so it must me mainly a tire wear issue?
Title: Re: Spring Installation?
Post by: MeanKS on March 24, 2014, 12:28:11 PM
Quote from: DJE624 on March 24, 2014, 09:45:46 AM
Springs will firm it up for sure.  It should take 2-3 hours maybe.  You should have no problem with the stock shocks but make sure you get an alignment as soon as possible.

did you install them yourself?
Title: Re: Spring Installation?
Post by: MeanKS on March 24, 2014, 12:30:22 PM
Quote from: bykr on March 24, 2014, 10:31:03 AM
I did mine with a friend and it took about 3 hrs. with some issues(as usual).I kinda like the ride better before.Now if you see something like a bump or dip you've got to slow down.Before it would just cruise over stuff like you described.But it looks way better!BTW, I haven't done an alignment (waiting for new tires) but I haven't noticed any change in the steering/handling,so it must me mainly a tire wear issue?

yea, well the ride on the SHO is alot stiffer to begin with.  most who install springs on the SHO just want to lower it for the look.

Title: Re: Spring Installation?
Post by: SRT82ECOBOOST on March 24, 2014, 12:59:34 PM
Worthy of noting that the ride with H+R springs is much firmer than stock.
Title: Re: Spring Installation?
Post by: MeanKS on March 24, 2014, 03:12:36 PM
Quote from: SRT82ECOBOOST on March 24, 2014, 12:59:34 PM
Worthy of noting that the ride with H+R springs is much firmer than stock.

for the SHO, MKS, or both?

the MKS has plenty of room for a stiffer ride.  its incredibly supple to begin with.

Eibach does not make a set of springs specific to the MKS, H&R does...
Title: Re: Spring Installation?
Post by: SRT82ECOBOOST on March 24, 2014, 03:29:21 PM
Quote from: DRII on March 24, 2014, 03:12:36 PM
Quote from: SRT82ECOBOOST on March 24, 2014, 12:59:34 PM
Worthy of noting that the ride with H+R springs is much firmer than stock.

for the SHO, MKS, or both?

the MKS has plenty of room for a stiffer ride.  its incredibly supple to begin with.

Eibach does not make a set of springs specific to the MKS, H&R does...
I just figured you would see my signature and that I have the SHO. It is indeed a stiff spring rate on the H+R's and you feel it on uneven roads.
Title: Re: Spring Installation?
Post by: Boggus on March 24, 2014, 04:54:38 PM
I installed Eibach springs on my 2013 SHO.  Not a terribly hard install, but about 2-3 hours from start to finish.
Title: Re: Spring Installation?
Post by: DJE624 on March 24, 2014, 08:29:07 PM
Quote from: DRII on March 24, 2014, 12:28:11 PM
Quote from: DJE624 on March 24, 2014, 09:45:46 AM
Springs will firm it up for sure.  It should take 2-3 hours maybe.  You should have no problem with the stock shocks but make sure you get an alignment as soon as possible.


did you install them yourself?


No.  But I did watch.  :clown:

From what I've seen here, the installation on the 13-14's was a bit easier than on the 10-12 SHO.  My guy had to pull the whole assembly on each front corner.
Title: Re: Spring Installation?
Post by: IHeartGroceries on March 24, 2014, 09:10:24 PM
H&Rs were on my radar.

But, if they stiffen to ride too much...eh. Grew tired of that with my Mazda.

My SHO has the PP, so it isn't exactly supple. But I really like it the way it is now. Need to lose that rake though.


Hmmmm...

Sent from my SM-N900V using Tapatalk
Title: Re: Spring Installation?
Post by: Wild13SHO on March 24, 2014, 10:32:32 PM
Quote from: IHeartGroceries on March 24, 2014, 09:10:24 PM
H&Rs were on my radar.

But, if they stiffen to ride too much...eh. Grew tired of that with my Mazda.

My SHO has the PP, so it isn't exactly supple. But I really like it the way it is now. Need to lose that rake though.


Hmmmm...

If you want to loose the rake and keep the same ride quality just install eibachs in the rear.  Mine sits perfectly level now and looks a ton better.  The rear doesn't feel like it floats anymore either. 

Sent from my SM-N900V using Tapatalk
Title: Re: Spring Installation?
Post by: Wild13SHO on March 24, 2014, 10:34:14 PM
Quote from: DRII on March 24, 2014, 03:12:36 PM
Quote from: SRT82ECOBOOST on March 24, 2014, 12:59:34 PM
Worthy of noting that the ride with H+R springs is much firmer than stock.

for the SHO, MKS, or both?

the MKS has plenty of room for a stiffer ride.  its incredibly supple to begin with.

Eibach does not make a set of springs specific to the MKS, H&R does...

Are the suspensions different from the SHO and MKS? Would the Megan's coil-overs work on an MKS? 
Title: Re: Spring Installation?
Post by: pejohnson on March 24, 2014, 10:41:22 PM

Quote from: IHeartGroceries on March 24, 2014, 09:10:24 PM
H&Rs were on my radar.

But, if they stiffen to ride too much...eh. Grew tired of that with my Mazda.

My SHO has the PP, so it isn't exactly supple. But I really like it the way it is now. Need to lose that rake though.


Hmmmm...

Sent from my SM-N900V using Tapatalk


X2 for me here. I want to lose the rake but not make the ride too stiff. Coil overs maybe the ticket.


Sent from my iPhone using Tapatalk
Title: Re: Spring Installation?
Post by: MeanKS on March 24, 2014, 10:54:28 PM
Quote from: SRT82ECOBOOST on March 24, 2014, 03:29:21 PM
Quote from: DRII on March 24, 2014, 03:12:36 PM
Quote from: SRT82ECOBOOST on March 24, 2014, 12:59:34 PM
Worthy of noting that the ride with H+R springs is much firmer than stock.

for the SHO, MKS, or both?

the MKS has plenty of room for a stiffer ride.  its incredibly supple to begin with.

Eibach does not make a set of springs specific to the MKS, H&R does...
I just figured you would see my signature and that I have the SHO. It is indeed a stiff spring rate on the H+R's and you feel it on uneven roads.

and i assumed you knew i have a MKS and that you had some first hand knowledge of H&Rs on it.

H&R claims the MKS springs are completely different from the ones they offer on the SHO, so experience with the SHO H&R springs doesn't necessarily mean much regarding the MKS.
Title: Re: Spring Installation?
Post by: MeanKS on March 24, 2014, 10:58:56 PM
Quote from: Wild13SHO on March 24, 2014, 10:34:14 PM
Quote from: DRII on March 24, 2014, 03:12:36 PM
Quote from: SRT82ECOBOOST on March 24, 2014, 12:59:34 PM
Worthy of noting that the ride with H+R springs is much firmer than stock.

for the SHO, MKS, or both?

the MKS has plenty of room for a stiffer ride.  its incredibly supple to begin with.

Eibach does not make a set of springs specific to the MKS, H&R does...

Are the suspensions different from the SHO and MKS? Would the Megan's coil-overs work on an MKS?

from what i hear from individuals who have seen both car builds naked, you can't tell the difference between the two.

any distinction lies in tuning, and extra NVH controls on the MKS like additional sound deadening material and a few additional cross-member supports.

coil overs should work for both.
Title: Re: Spring Installation?
Post by: MeanKS on April 15, 2014, 02:10:12 PM
been getting some quotes for springs install.

cheapest so far is $500.00

:o

i didn't expect it to be that much...
Title: Re: Spring Installation?
Post by: crash712us on April 15, 2014, 05:10:41 PM
That seems a bit to much I'd say its about a 4hr job. Whats there hourly rate? and does that include a alignment?
Title: Re: Spring Installation?
Post by: MeanKS on April 15, 2014, 05:38:41 PM
Quote from: crash712us on April 15, 2014, 05:10:41 PM
That seems a bit to much I'd say its about a 4hr job. Whats there hourly rate? and does that include a alignment?

i don't believe that one included alignment.

one quote of $775 did include all wheel alignment...
Title: Re: Spring Installation?
Post by: crash712us on April 15, 2014, 09:28:13 PM
Ouch!


Sent from my iPhone using Tapatalk
Title: Re: Spring Installation?
Post by: southtxSHO on June 19, 2014, 10:34:00 AM
Getting my H&R springs installed today . $250 including alignment

Sent from my SM-N900T using Tapatalk

Title: Re: Spring Installation?
Post by: MeanKS on June 19, 2014, 10:39:30 AM
Quote from: southtxSHO on June 19, 2014, 10:34:00 AM
Getting my H&R springs installed today . $250 including alignment

Sent from my SM-N900T using Tapatalk

thats a great price!

who is doing it, a friend/hookup?
Title: Re: Spring Installation?
Post by: southtxSHO on June 19, 2014, 10:56:04 AM
Quote from: MeanKS on June 19, 2014, 10:39:30 AM
Quote from: southtxSHO on June 19, 2014, 10:34:00 AM
Getting my H&R springs installed today . $250 including alignment

Sent from my SM-N900T using Tapatalk

thats a great price!

who is doing it, a friend/hookup?
Lol , yeah .. The owner of the tire shop where my bro works gave me a great deal .

Sent from my SM-N900T using Tapatalk

Title: Re: Spring Installation?
Post by: FoMoCoSHO on June 19, 2014, 09:56:28 PM
$300 with tax and alignment at the dealership.
EhPortal 1.39.5 © 2025, WebDev