Print Page - Clunk sound under heavier braking or slow turning.

Title: Clunk sound under heavier braking or slow turning.
Post by: thatsmrgimp2u on March 08, 2014, 11:08:31 AM

I'm thinking it might be a sway bar bushing or endlink, but I'm not 100 percent sure. Has anyone experiences this and gotten the issue resolved?

Sent from my XT1060 using Tapatalk

Title: Re: Clunk sound under heavier breaking or slow turning.
Post by: IHeartGroceries on March 08, 2014, 11:39:29 AM

I've had a bad lower ball joint create similar symptoms...

Sent from my SM-N900V using Tapatalk

Title: Re: Clunk sound under heavier braking or slow turning.
Post by: MDesign Performance on March 08, 2014, 01:45:33 PM

Check your sway bar end links. You can get OEM for around $20-30 on eBay.

Title: Re: Clunk sound under heavier braking or slow turning.
Post by: thatsmrgimp2u on March 09, 2014, 09:38:52 PM

Just ordered some Moog front links. Will update if that resolves the issue.

Sent from my XT1060 using Tapatalk

Title: Re: Clunk sound under heavier braking or slow turning.
Post by: elund126 on March 26, 2014, 09:18:03 PM

My front end clunking was caused by failed outer tie rod links. Although, it happened more when I went over bumps.

Title: Re: Clunk sound under heavier braking or slow turning.
Post by: black99lightning on March 26, 2014, 10:23:21 PM

had to have the endlinks replaced on the Explorer. Lots of clunking. Thought it was more severe than just sway bar end links, but that was it.

Ecoboost Performance Forum

Ecoboost Performance => Troubleshooting, Maintenance, TSB Articles => Troubleshooting => Topic started by: thatsmrgimp2u on March 08, 2014, 11:08:31 AM