hello guys new to forum and new to the car as well. I have a 2010 cinnamon sho with acc.
mods done so far include venting diverter valves to atmosphere, plastidipped wheels, limo tint all around, and ceramic pads.In the very near future looking to get an unleashed tune, lower on h&r, and a new set of wheels. Leaning towards the tsw panorama bronze in 20's but also debating on american racing torq thrust m 20s in anthracite but not sure how it would look.
Taken it out to sunshine (showtime now) speedway and ran my best of 9.9 in the 1/8th mile. Is this on par for our cars with no mods? 2011 v6 mustang with just an intake and exhaust ran 9.3 or 9.4
thanks guys, open to opinions comments and suggestions
Welcome & congrats on your gorgeous SHO! Great list of mods done & yet to come :thumb:
Welcome! Nice to see another cinnamon SHO.
Welcome aboard! :newbie: :hi:
Rare color for that model year.
Looks good & with your intended list of mods to come, you'll inevitably see those times dropping.
Enjoy the site & we look forward to your involvement / experiences!
"The Other" Mike :beer:
Sent from my DROID RAZR HD using Tapatalk
Welcome to the EBPF family. ......... Enjoy learn and share your knowledge .
Welcome, is that plasti-dip on the wheels? I would like to see you do the LED surrounds and the fake vent thingies like I did, they pop right off, easy mod.
Looks sharp! Go with the TSW's as they are rotoforged and light to give better performance and MPG's.
thank you all for the welcomes and quick replies. Courier, yes they are plastidipped i didnt think it turned out too bad, although i rubbed a tiny part off of one wheel and silver flakes were on the backside of the plasti, im thinking it pulled some of the finish off of the wheel. Do you guys think acetone or any other solvent would be safe to use to remove the plastidip and not hurt the stock wheels? I definitely think the bronze tsw's and cinnamon will be a good combo.
Quote from: webb1216 on January 09, 2014, 07:42:55 PM
I definitely think the bronze tsw's and cinnamon will be a good combo.
That does sound pretty cool. I was going to whip up a sample on their configurater but they don't even have cinnamon!
:WELCOME: Glad you've joined us. You're lucky to have found a cinnamon metallic car! They are indeed rare, the color was the lowest production color for 2010. Hope you enjoy the car, and if you add a tune, it will really make the car more fun.
I looked all over for that color but had to settle for red! Really nice car. Hopefully mods to come
Quote from: webb1216 on January 09, 2014, 02:14:31 PM
Taken it out to sunshine (showtime now) speedway and ran my best of 9.9 in the 1/8th mile. Is this on par for our cars with no mods? 2011 v6 mustang with just an intake and exhaust ran 9.3 or 9.4
To me that sounds off. 9.9 would put you at mid 15's through the 1/4. You should be high 13's to low 14's stock.
Quote from: black99lightning on January 14, 2014, 01:34:45 PM
Quote from: webb1216 on January 09, 2014, 02:14:31 PM
Taken it out to sunshine (showtime now) speedway and ran my best of 9.9 in the 1/8th mile. Is this on par for our cars with no mods? 2011 v6 mustang with just an intake and exhaust ran 9.3 or 9.4
To me that sounds off. 9.9 would put you at mid 15's through the 1/4. You should be high 13's to low 14's stock.
does anyone else have any stock 1/8th times? I feel like our cars at least stock are more top end power. I would pull away from almost everything as soon as we had to slow down.
Welcome, and nice ride! I think this is the only color SHO I have yet to see in person.
Welcome to EBPF!!!
Glad to have you here webb!
:hi:
Cool color for sure..... get a cerificate of authenticity! I bet there are under 100 of it!
advice?... eat BMWs, Lexus, etc.! but mostly enjoy a fun and not too common ride.