October 21, 2018, 06:25:58 PM
collapse
collapse
Welcome to the Ecoboost Performance Forum
bpd1151
July 05, 2013, 08:35:17 AM by bpd1151
Views: 423300 | Comments: 10

Here is my Official "How-To" on Retro-Fitting the 2013 Aux Tranny Cooler onto the 2010-2012 SHO / EB 3.5 V6 Motor.....

1st, this install was performed on a NON ACC EQUIPPED car. For those of you with ACC, you will have to either consider relocating the ACC radar itself to an entirely new location, or possibly doing away with it altogether. The verdict is still out on where to place, or what exactly to do with the ACC radar as this mod is still relatively new, (having bee...
EcoPowerParts
June 30, 2013, 04:57:16 PM by EcoPowerParts
Views: 435154 | Comments: 35

Originally posted by TSS

]There are other threads discussing this, but I thought a dedicated thread with instructions might help others. I have received so much help here that it is payback time, finally, with me posting info that may help others (versus the other way around). :)

I did this last night in my MKS, and I have a 3 out of 10 skill level. The whole procedure took me about 15 minutes thanks to tips from others on this forum (parti...
bpd1151
July 05, 2013, 09:59:58 AM by bpd1151
Views: 92825 | Comments: 2

Here is some info I dug up from various resources, on properly retraining your TPMS Sensors.

Part of this was inspired by the fact that I was forced to purchase new TPMS sensors for my after market TSW wheels.

My Manager pal (Nick Madsen) who works @ NTB (in Downers Grove, IL) was not able to retrain the new sensors as the tool they had was not compatible with Ford.

So off to the Dealership I went.

The tech performing the resets was a newer kid, who al...
bpd1151
July 05, 2013, 10:24:08 AM by bpd1151
Views: 51299 | Comments: 2

Well, I finally got around to gutting open the outside mirror "puddle lamps" so that I could remove the stock bulb and replace it with a much brighter, LED upgrade.

I've seen lots of posts over the last few months of people asking how to install them, what's involved, questions about bulb sizes, etc.... but I never saw any actual "how-to" write ups on performing this change.

As I've tried to do with all of my mods, both on the SHO, and on my previous Charger build, I will a...
bpd1151
July 05, 2013, 11:05:45 AM by bpd1151
Views: 48418 | Comments: 3

The following step-by-step "How-To" details the measurements I came up with to re-position the TAURUS trunk badge lettering.

I opted to perform this mod because I thought that the final outcome was more much complimentary to the SHO's overly large rear end.

You should compile the following tools to assist you in completing this project:

1 Grease "Stabilo" Type Pencil
1 X-acto knife / razor
1 Measuring Tape
1 Roll of Blue Pa
...
Pages: 1 [2] 3 4 ... 6
 
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

* Top Topics


Back to top