Ecoboost Performance Forum

Ecoboost Vendor Section => Ecoboost Vendors => TCE Brakes => Topic started by: Todd TCE on July 09, 2015, 08:17:20 PM

Title: TCE/Wilwood REAR brake kit ***SPECIAL***
Post by: Todd TCE on July 09, 2015, 08:17:20 PM
Folks...I've got 12 pair of rear brackets sitting here collecting AZ dust.

Now I know many of you don't like the fact that this kit is a NON parking brake kit. And that's simply not going to change. But...They do me no good and need to be on your ride.

http://www.tceperformanceproducts.com/flex-/-sho/kits-23/ (http://www.tceperformanceproducts.com/flex-/-sho/kits-23/)

So I'm prepared to blow out some of them!  Normally this rear kit is $2129 plus shipping.

I'm going to tickle the fancy of the 'front kit only owners' with a deal on a single kit purchase: $1895 to the door. Save roughly $300 here.

For those of you who figured "some day" on these kits here's your deal: Purchase a FRONT and REAR kit (base value $4326 plus shipping) for $4092 and I'll pick up the ground UPS on both. That's a $234 savings on the rear kit and upwards of $200 in shipping.

CALL, EMAIL, PM, FACEBOOK, SMOKE SIGNALS...whatever works for you.
toddandchris1@cox.net   480-967-7901
 
*Drilled/slotted and custom fees still apply
**All shipments ground UPS, cont. US only
***Black or Red standard
****Slotted rotors standard
*****Build time: rear kits- 7-10 days, front kit- one available now



I'll leave this an open ended offer for now. But when I say 'done' it's done.
Title: Re: TCE/Wilwood REAR brake kit ***SPECIAL***
Post by: bpd1151 on July 10, 2015, 04:05:03 AM
Damnit.

My annual longevity check doesn't post to my account until mid August.

Gggrrrrr.

I am wondering though, since I have the 15" rotor up front, & would ideally like to employ the same set up on my rears.....  That shouldn't be an issue, correct Todd?

Expect my (pending order) call in 4 weeks for the rears.
Title: Re: TCE/Wilwood REAR brake kit ***SPECIAL***
Post by: Todd TCE on July 10, 2015, 11:08:35 AM
The rears will remain 14.25"..sorry.

The basic reason being rotor selection: the rears are 1.10 and things are not engineered for the 1.25 width of the 15" discs there.
EhPortal 1.39.5 © 2024, WebDev