Has anyone with an early build 2010 switched from the PCV heater element and electric heated PCV valve to no PCV heater element and standard PCV valve? I have an early 2010 (engine build date 2009-10-14) with the heated PCV and would like to switch to the standard PCV.
Not sure if anyone has? The only ones who I know might have are @bpd1151 (https://www.ecoboostperformanceforum.com/index.php?action=profile;u=152) but he has a newer block in his 2010...
Or @802SHO (https://www.ecoboostperformanceforum.com/index.php?action=profile;u=3959) maybe?
Here are the part differences I have so far. My biggest concern is a different PCM is required.
The PCV valve is included when purchasing the crankcase vent oil separator. I do not believe there is a difference in the separator itself.
Early Build
PCV Valve | AA5Z-6A666-A |
Crankcase Ventilation Tube | AA5Z-6C658-A |
Crankcase Vent Oil Separator | AA5Z-6A785-A |
PCV Heater Element | 9L3Z-9F695-A |
Engine Wiring Harness | AU5Z-12A581-CA |
Late Build
PCV Valve | KR3Z-6A666-A |
Crankcase Ventilation Tube | AA5Z-6C658-B |
Crankcase Vent Oil Separator | AA5Z-6A785-F |
PCV Tube | AL3Z-9F695-A |
Engine Wiring Harness | AU5Z-12A581-HA |