Plans are to follow my Flex path, aux fueling and working with Adam at Tune+ for tuning, Ryan Brown for engine and full build in TX. :)
Full back half/tube frame/fuel cell setup.
Congrats Mike on the awesome ride and certainly looking forward to the new Developments,best of luck. Z :thumb:
(http://memestorage.com/_nw/34/79930926.jpg)
Let's get on with it!!! :D
Sounds amazing!
Am I the only one who can't see the pictures?
Don
Quote from: dcmartinpc on March 13, 2017, 04:21:30 PM
Sounds amazing!
Am I the only one who can't see the pictures?
Don
Think there is an issue with them now. They were fine earlier. Its black IIRC, looks like a stock tremor
Very nice!
Sent from my Pixel using Tapatalk
Can't wait to see what kind of debauchery you get into with this truck! :thumbsup:
Never heard of a Tremor. Darn fine looking rig. Look forward to seeing what mayhem transpires.
Lots of MODS since this post :)
Suspension work, boost activated cutouts, custom trans mount for more clearance etc. etc.
Latest mods are new billet Circle D 258mm stall 3K RPM, Eaton Truetrac and 3.31 gears (from 4.10) and boy is it a new truck!
Here's a picture of the truck now with some videos of the truck with new stall and gears.
Stall
https://youtu.be/GAPbmIynXrU (https://youtu.be/GAPbmIynXrU)
Gears on the road after pickup
https://www.youtube.com/watch?v=6SNQV2FLPIE (https://www.youtube.com/watch?v=6SNQV2FLPIE)
Gears on the freeway
https://www.youtube.com/watch?v=431IvMALHzM (https://www.youtube.com/watch?v=431IvMALHzM)
Have 2 step, trans brake to install this week. Already have drag radials and wheels.
Next I need a gosh dang pump to let me run E85!
0-60 video, 5.21 on street tires in a 5Klb 2WD truck is pretty dang awesome I think.
I NEED SOME E85 though!!!
https://youtu.be/VwL4TTiofJ8
Sync 3 conversion parts all showed up! Installing this weekend.(https://uploads.tapatalk-cdn.com/20180602/a72c25ee7e4d1af387a261692ddec36c.jpg)(https://uploads.tapatalk-cdn.com/20180602/79ba33397e9bf16f1218efca6942c476.jpg)(https://uploads.tapatalk-cdn.com/20180602/cfc751ad81523267ab59699028f8ff43.jpg)(https://uploads.tapatalk-cdn.com/20180602/31b39afe49a09413bbbaa74ae7b58c5c.jpg)
Sent from my Pixel 2 XL using Tapatalk
Sweet upgrade!
Sweet Kitchen! I changed my Apim twice... I found patients to be a vertue. :) BTW ignore all the B-CODES after install is complete. Z
(https://i.imgur.com/upmfAQLh.jpg?1)
(https://i.imgur.com/Gihgp4th.jpg?1)
Thanks Z. Almost done, will have to finish tonight(https://uploads.tapatalk-cdn.com/20180602/892893585afa240c4ee253e70233db01.jpg)
Sent from my Pixel 2 XL using Tapatalk
Mike, how much did the conversion parts run?
After experiencing Sync 3 in the CMAX I'd love to convert the Lincoln.
Quote from: FoMoCoSHO on June 02, 2018, 01:04:07 PM
Mike, how much did the conversion parts run?
After experiencing Sync 3 in the CMAX I'd love to convert the Lincoln.
Under $700(https://uploads.tapatalk-cdn.com/20180603/fd54acc5ba1084f2c380a1dabbfe6de2.jpg)
Sent from my Pixel 2 XL using Tapatalk
Just finished (mostly), I didn't realize I would need the 4Dtech USB harness and faceplate adapter but I just ordered them.
I used the following codes for my Tremor:
7D0-01-01 2A21 0406 002E
7D0-01-02 0289 0600 0A75
7D0-02-01 5553 0103 40C6
7D0-02-02 8200 0000 005D
7D0-02-03 0005 E1
7D0-03-01 0000 0103 00DF
7D0-04-01 0100 1100 0AF8
7D0-04-02 0004 E1
7D0-05-01 198C 198C 2E55
7D0-05-02 0EEC
7D0-06-01 805E
7D0-07-01 0A00 3300 001C
7D0-07-02 0000 0EF9 00E7
7D0-07-03 0056 5684 0011
7D0-07-04 694B
Always a bit of fun getting the right hex values in place when doing these upgrades :D
All done!
https://youtu.be/zSSnt7B8reE
Sent from my Pixel 2 XL using Tapatalk
Looks like so much fun. Makes me wish I could get a Tremor for a DD.
^^^ Agreed!
I love my truck, some of the next steps is to dial in the suspension so it's way more car like than truck :) I'll add some helper bags in case of some load required but mostly it's a big car to me.
Next project under way, water to air IC with new IC and reservoir but reusing my V's old HX and pump.(https://uploads.tapatalk-cdn.com/20180604/338f601ce8fff10709044000c9d6d773.jpg)(https://uploads.tapatalk-cdn.com/20180604/538611c11857e3a6b7181460be7dc21a.jpg)(https://uploads.tapatalk-cdn.com/20180604/86ad3b666f380e7d28f77f4c9109c375.jpg)(https://uploads.tapatalk-cdn.com/20180604/0e03bae3823b821465553d56794485cd.jpg)(https://uploads.tapatalk-cdn.com/20180604/ad5d45ded36d1cf69be7e6fd5c4f59c8.jpg)
Sent from my Pixel 2 XL using Tapatalk
Had a small c notch and custom leaf springs done to level the truck. The ride is SO MUCH BETTER. By leveling the truck the front rides a ton better as well. Next is some double adjustable shocks for the rear and coilovers for the front. Also doing some audio work, I'll post more on that as it occurs.(https://uploads.tapatalk-cdn.com/20180708/41f2d8feb414341ba2310601a9ae2b1b.jpg)(https://uploads.tapatalk-cdn.com/20180708/d9fa86102756cd920f0cc9c3d5bc015a.jpg)(https://uploads.tapatalk-cdn.com/20180708/6f3a6a641e7c908a4dd6d22e079f7778.jpg)(https://uploads.tapatalk-cdn.com/20180708/70f69b5ae8afa9bea51d97acfb44750e.jpg)(https://uploads.tapatalk-cdn.com/20180708/2f4057f7ccd42bb6a2ed5ff225e09947.jpg)(https://uploads.tapatalk-cdn.com/20180708/ad2c09b0ab89cea40c9948f4ed785d24.jpg)(https://uploads.tapatalk-cdn.com/20180708/1a20b9aaa7a82d1e6f67b51a7c8ab590.jpg)(https://uploads.tapatalk-cdn.com/20180708/07ae1a4e9e8fb7e01d5764cd800f009d.jpg)(https://uploads.tapatalk-cdn.com/20180708/e5cc412e1b363825db00dda8a1872474.jpg)
Sent from my Pixel 2 XL using Tapatalk
Thats one Swweeeeeeeet truck! Z :)
Looks so good. How has the ride been since the gear and converter change?
I need to go test drive one of these some time.
Quote from: FearlessAZ on July 08, 2018, 01:15:57 PM
Looks so good. How has the ride been since the gear and converter change?
I need to go test drive one of these some time.
LOVE IT! I was doing 85 at 2K RPM today just cruising. I need to update the shocks as I had said, do some type of panhard bar and I want to add some helper bags in the rear just in case I need to use the truck. My wife drove with me yesterday and today and she is quite happy with not having the super bouncy ride with an unloaded truck.
Car audio stuff happening, I'll link to my diymobileaudio thread to make it easier but basically doing a Audiofrog active front 3 way with GB60/GB25/GB10 fronts and dual JL cs113tg-tw5-v2 sub boxes on Rockford T1000-bdcp sub and dual T400-4 amps for the front end and GB60/GB10 center channel I'm building. Using a JL MS-8 processor as well. 3D printing custom sail panel speaker mounts for the GB25/GB10's. Long term I'll probably do a blow through with dual JL 13W7's but that will be a long time off.
https://www.diymobileaudio.com/forum/build-logs-project-install-gallery/407357-2014-f150-tremor-regular-cab-short-bed-truck-build.html (https://www.diymobileaudio.com/forum/build-logs-project-install-gallery/407357-2014-f150-tremor-regular-cab-short-bed-truck-build.html)
Mike Probably got some Sponsors lined Up! Z :)
Damn it Mike, You made me want one of those damn things now. The stance is just right. Very nice truck
Quote from: ZSHO on August 07, 2018, 07:00:40 AM
Mike Probably got some Sponsors lined Up! Z :)
Nope all out of pocket myself, I've been buying used or refurb on ebay, hit up my old boss that still runs a car stereo shop for cost on the JL and Audiofrog stuff. It's weird doing this again after so long not building gigantic high end systems.
Late to the game here, but that's an awesome truck. Awesome!
I need sound deadening!!! I played with the crossover points (now around 45hz) and played with the gain. I can now audibly and physically shake the roof 1/2" or so, it resonates HORRIBLY but the bass is DEEP and CLEAN. The JL 13tw5v2-2 on the Rockford 1000 amp is HOLY CRAP loud (for my old ears). Still have to install the processor, top end amps and speakers but the bass is loud, my thoughts of doing a blow through are gone, no need at all. I can probably do a custom box full width around 3" deep for these two drivers and then build a custom amp rack above or below to make everything clean.
PLA printed prototype is done. I cut the sail panel on the passenger side to check. Had to remove the defroster duct for it to fit. There's a gap in the inside edge, we'll see if I can heat up the panel to make it fit, I've decided this panel will be replaced with a new one. I'll end up wrapping the panels in leather eventually.
The grill has indents for small round neodymium magnets and the posts we'll drill and glue in steel rods. The grill idea is to cover it in grill cloth. The next parts will be printed in black ABS that can be finished to a gloss black.
So far so good!
(https://uploads.tapatalk-cdn.com/20180811/594092a9f88de0b0220a9ce76fab5310.jpg)(https://uploads.tapatalk-cdn.com/20180811/49cb7b7422f4bb8f461da8d8d624d29d.jpg)(https://uploads.tapatalk-cdn.com/20180811/8fa82f5196d04a326459ef5695c58765.jpg)(https://uploads.tapatalk-cdn.com/20180811/211433f34d06bd89d20c41c2041812c4.jpg)(https://uploads.tapatalk-cdn.com/20180811/7f841c6324b6a3575c0e7436e66c317a.jpg)(https://uploads.tapatalk-cdn.com/20180811/ac89305f564825348698c5b9f0568a63.jpg)(https://uploads.tapatalk-cdn.com/20180811/af3bc09c36446c7fa2524fde98871a28.jpg)(https://uploads.tapatalk-cdn.com/20180811/828f2be510e6e799f678341fedb27151.jpg)
Sent from my Pixel 2 XL using Tapatalk
Dammit Mike! Quit making me want a Tremor! ;D
These JL's do pretty good!
https://youtu.be/rLDl1SiF-a0
Sent from my Pixel 2 XL using Tapatalk
Looks awesome, might have to mess with you if I see you in town Mike.
Quote from: sm105k on August 23, 2018, 04:29:57 PM
Looks awesome, might have to mess with you if I see you in town Mike.
You'll kill me with your AWD :)
I will give you the hit. Lol. Just look for the plate.
Anybody looking at that license plate might be too distracted anyway.
Quote from: SHOdded on August 23, 2018, 05:16:13 PM
Anybody looking at that license plate might be too distracted anyway.
Police love my plate, street light to street light Mustangs owners hate it, and good looking women usually give me a big grin.
Quote from: sm105k on August 23, 2018, 04:52:20 PM
I will give you the hit. Lol. Just look for the plate.
I swear I have seen that one around a couple times.
Gen two, includes a cam lock on the straight side so that it can be screwed into place. Almost done!(https://uploads.tapatalk-cdn.com/20180825/f4ec317435f85c3dedd25f84911c62c1.jpg)(https://uploads.tapatalk-cdn.com/20180825/01cc1e30e030bfea257f793290efad2f.jpg)(https://uploads.tapatalk-cdn.com/20180825/5ce41ed71530f28f5b3c250a81441849.jpg)(https://uploads.tapatalk-cdn.com/20180825/d77c43b3e7389e0471ff889412f50bb2.jpg)(https://uploads.tapatalk-cdn.com/20180825/86ca9557b0dd351e09b6ec9a16370045.jpg)(https://uploads.tapatalk-cdn.com/20180825/6003f2a2967f93f82f8673168a57cd22.jpg)
Sent from my Pixel 2 XL using Tapatalk
Got some decent pictures last night for phone pictures. Maxtrac 2" dropped spindled showed up as well as 2015 upper control arms and lower ball joints so that I can replace the DJM control arms which causes the steering to rub and bind.
Ordered some double adjustable Vi-king rear shocks and when we swap out the front suspension the shop is going to build some mounts upper/lower to allow for some Vi-king double adjustable coilovers to be put on the truck, will have to take measurements and order. Really hoping to make a huge difference in ride quality, the Bell stuff is just STIFF, I'm looking for a much better ride. New rear leaf springs have made a huge difference but the shocks have way too much compression and no rebound at all from what I'm feeling.
(https://uploads.tapatalk-cdn.com/20180902/d25f5b48a6dae168cb2e8c5cfdb9f919.jpg) (https://uploads.tapatalk-cdn.com/20180902/d25f5b48a6dae168cb2e8c5cfdb9f919.jpg)(https://uploads.tapatalk-cdn.com/20180902/02eda2ac26a224b9cae035c9dec0b0f9.jpg) (https://uploads.tapatalk-cdn.com/20180902/02eda2ac26a224b9cae035c9dec0b0f9.jpg)(https://uploads.tapatalk-cdn.com/20180902/66b9bc045f664d6036252537999fa1e7.jpg) (https://uploads.tapatalk-cdn.com/20180902/66b9bc045f664d6036252537999fa1e7.jpg)(https://uploads.tapatalk-cdn.com/20180902/da80019c5c3228a41b4ab103e3989068.jpg) (https://uploads.tapatalk-cdn.com/20180902/da80019c5c3228a41b4ab103e3989068.jpg)(https://uploads.tapatalk-cdn.com/20180902/95bb5e20c5ac1e08f5b310086322da5a.jpg) (https://uploads.tapatalk-cdn.com/20180902/95bb5e20c5ac1e08f5b310086322da5a.jpg)
Sent from my Pixel 2 XL using Tapatalk
Sounds like you opted for the wagon wheel upgrade. Suspension? What suspension? LOL.
Quote from: SHOdded on September 02, 2018, 08:18:56 PM
Sounds like you opted for the wagon wheel upgrade. Suspension? What suspension? LOL.
I can't believe people accept this at all but then I'm used to my CTS-V magna ride and it's amazing with small sidewalls
How IS the V doing by the way? Is that a done project?
Mike, if you ever need a camera guy to shoot some pics, just shoot me a message. I'm not the best in the world but I wouldn't mind shooting some pictures of the Tremor for free.
I do need that badly, hit me up on FB, it's easier. Let's see something up
Quote from: FearlessAZ on September 03, 2018, 07:19:49 AM
Mike, if you ever need a camera guy to shoot some pics, just shoot me a message. I'm not the best in the world but I wouldn't mind shooting some pictures of the Tremor for free.
Sent from my Pixel 2 XL using Tapatalk
Getting reassembled now, shooting for a race late October
Quote from: SHOdded on September 03, 2018, 06:06:04 AM
How IS the V doing by the way? Is that a done project?
Sent from my Pixel 2 XL using Tapatalk
Final printed product, will have some sanding and then doing gloss finish once I pick them up.
Dropped the truck off today for full system install, sound deadening, dual under hood batteries and some custom upholstery. Should be done in a couple of weeks!
I'll post pictures as I get them. Can't WAIT!!!
Had a photoshoot done last week, came out pretty freaking awesome.
After I get the truck back it will be time for the water to air IC and hopefully some other performance mods.
I really would like to get this thing into the 11's on a drag radial.
Does look pretty kicka**!
Progress!(https://uploads.tapatalk-cdn.com/20180920/7a9f918f647a3bb9d57de713af7ebd02.jpg)(https://uploads.tapatalk-cdn.com/20180920/b9435652108d6f7eccb77bb1ec35e687.jpg)
Sent from my Pixel 2 XL using Tapatalk
Blow through coming together(https://uploads.tapatalk-cdn.com/20180922/43810cc445eac8ccdbc4775e388d21d7.jpg)
Sent from my Pixel 2 XL using Tapatalk
More pictures!(https://uploads.tapatalk-cdn.com/20180924/99a82c303df3f06e5bcfb7951fa4c244.jpg)(https://uploads.tapatalk-cdn.com/20180924/c8234a197f011f6b4d90591911c8e648.jpg)(https://uploads.tapatalk-cdn.com/20180924/a6ac8a39ed5f6c92bdb83ba74f9d725a.jpg)(https://uploads.tapatalk-cdn.com/20180924/ff1473c6c8b4835ade89577ed9e85492.jpg)(https://uploads.tapatalk-cdn.com/20180924/69af727b9f729c450c9d11c48d8d0885.jpg)
Sent from my Pixel 2 XL using Tapatalk
Amp rack with close-up of threaded inserts for amp mounting(https://uploads.tapatalk-cdn.com/20180924/78c27ecbff508f54197d5a129c32414e.jpg)(https://uploads.tapatalk-cdn.com/20180924/576037a41361cbf73ebbaa8ad6d837da.jpg)
Sent from my Pixel 2 XL using Tapatalk
That Truck is BOOMIN ! Z :thumb:
Amp rack, new door grills and new gauges in the dash for volts and boost that match, replaced the e locker switch and cigarette lighter.(https://uploads.tapatalk-cdn.com/20180924/33224cb862d460b988f713ceefe13082.jpg)(https://uploads.tapatalk-cdn.com/20180924/cabbae98aed4d868a609b196ae99ab73.jpg)(https://uploads.tapatalk-cdn.com/20180924/38d84991d843bdcb72cafc116c6dd781.jpg)(https://uploads.tapatalk-cdn.com/20180924/fb9bae426a43b63ede8385d6af8d289d.jpg)
Sent from my Pixel 2 XL using Tapatalk
Sail pod ready for paint and custom mesh grill(https://uploads.tapatalk-cdn.com/20180925/4edfabb92589d099e94e72a1d0b008ac.jpg)
Sent from my Pixel 2 XL using Tapatalk
More pictures of progress(https://uploads.tapatalk-cdn.com/20180926/c3ea0c8effa6680f62b46658d7aecdf0.jpg)(https://uploads.tapatalk-cdn.com/20180926/223db7734082e36111a794e0e24a2191.jpg)(https://uploads.tapatalk-cdn.com/20180926/08683bcd1322ccf3c2c9499ddfcb2747.jpg)(https://uploads.tapatalk-cdn.com/20180926/dcbc145c2ef99dcb844d5940a6ab4dab.jpg)(https://uploads.tapatalk-cdn.com/20180926/a831bf55de5ebc9490e0923c86181fad.jpg)
Sent from my Pixel 2 XL using Tapatalk
Custom trim rings in silver to match the AC vents. Dash mounted JBL DSP controller and the new volt and boost gauges flush mounted in the dash holes.(https://uploads.tapatalk-cdn.com/20180928/5af83cdca8911ece20efd4a9717882c4.jpg)(https://uploads.tapatalk-cdn.com/20180928/a0b7f6373c0e82b2c995b4c8d0cdc4d2.jpg)(https://uploads.tapatalk-cdn.com/20180928/6219ca4a27060c091f6e09b8394c14a4.jpg)(https://uploads.tapatalk-cdn.com/20180928/c9966ea5817eb82677f92d2463b734ab.jpg)(https://uploads.tapatalk-cdn.com/20180928/37cef7eed6a28cd4d43a2306d6a81350.jpg)(https://uploads.tapatalk-cdn.com/20180928/e636fe655738ddfec912d3bc2a0b95c5.jpg)
Sent from my Pixel 2 XL using Tapatalk
All that custom equipment and you're running a ms-8?
Why no mosconi, helix or hell even a Dayton dsp-408.
I'm running a ms-8 in my sho but it's limited on what it can do.
I'm waiting for the Audio Frog one to come out, until then this is still one of the best DSP out there
Quote from: glock-coma on September 27, 2018, 09:26:39 PM
All that custom equipment and you're running a ms-8?
Why no mosconi, helix or hell even a Dayton dsp-408.
I'm running a ms-8 in my sho but it's limited on what it can do.
Sent from my Pixel 2 XL using Tapatalk
Yeah the auto tune is pretty good. But having to rerun the calibration just to change crossover slopes is a major PIA.
All the tricks and ways you have to fool it to tune right are very cumbersome.
It'll work for now :)
Quote from: glock-coma on September 27, 2018, 09:38:45 PM
Yeah the auto tune is pretty good. But having to rerun the calibration just to change crossover slopes is a major PIA.
All the tricks and ways you have to fool it to tune right are very cumbersome.
Sent from my Pixel 2 XL using Tapatalk
Getting closer(https://uploads.tapatalk-cdn.com/20180929/d2d8641ff439333d88c4ab56f9ce8483.jpg)(https://uploads.tapatalk-cdn.com/20180929/f0c57819946b9ee33089131a77b5e7f1.jpg)(https://uploads.tapatalk-cdn.com/20180929/c6f692fa3b32aab350a3cfb2b6dfb623.jpg)(https://uploads.tapatalk-cdn.com/20180929/2ed98ffe369cd32069c81090bedf4c8e.jpg)(https://uploads.tapatalk-cdn.com/20180929/8d836b7008efe5e9cf926b13ce15b75d.jpg)(https://uploads.tapatalk-cdn.com/20180929/bbc44d7a9a0580ea884e37b8cccd8165.jpg)
Sent from my Pixel 2 XL using Tapatalk
Loving those anacondas coming off the battery :)
Just wow!(https://uploads.tapatalk-cdn.com/20180930/ae1f10ef5511ad5de0440833f17c5e51.jpg)
Sent from my Pixel 2 XL using Tapatalk
(https://media1.tenor.com/images/7e5c205a705cdee36a4c35efd392a61b/tenor.gif)
Time for some more suspension work...
Viking Performance, Inc. coilovers and double adjustable shocks and Inez Hotrods adjustable upper control arms are on the way to go with the Maxtrac Suspension 2" dropped spindles and Billet Pro Shop coilover mounts! Here's to a lowered truck that rides as good as it looks. #supersuspension(https://uploads.tapatalk-cdn.com/20181004/fe964f788c723f79ede169a37694ca31.jpg)(https://uploads.tapatalk-cdn.com/20181004/0378039ecf799f3e43966dc571eec5d2.jpg)(https://uploads.tapatalk-cdn.com/20181004/397cac94e0a60927e9c491a793202c58.jpg)(https://uploads.tapatalk-cdn.com/20181004/045bbdea3f797d2089ac148977b43fe6.jpg)(https://uploads.tapatalk-cdn.com/20181004/276156b14934b585a6da3c2e3c9f44ae.jpg)
Sent from my Pixel 2 XL using Tapatalk
Hmm suspension goodies(https://uploads.tapatalk-cdn.com/20181011/3e398b8fa76b9da54efde9caa1ed1b2c.jpg)
Sent from my Pixel 2 XL using Tapatalk
Rears are on, next week front coilovers going in(https://uploads.tapatalk-cdn.com/20181013/fad8f37bd789e493efc68eb9efbb7205.jpg)
Sent from my Pixel 2 XL using Tapatalk
OK did some more testing today 3 C and 6 R on the rears are awesome, I do need to have new shock mounts made as the shocks bottom out right now, easy fix just some new tabs. Also going to order a bar for a custom sway bar this week so I can get that installed at the same time. Might even look into a panhard bar to help keep the rear located under cornering. I'm looking forward to the new front suspension, no more steering rack bind on LCA would be nice!
Raining in Phoenix, not often so time for a truck pic(https://uploads.tapatalk-cdn.com/20181013/71057f10677789dd3a32798926d15c36.jpg)
Sent from my Pixel 2 XL using Tapatalk
The Truck looks Awesome Mike! :thumb:
Had to get a little more aggressive with cutting and rolling so I can stop cutting the sidewalls. Bats, bars, saws and bags, every mm needed. I even had the wheels shaved 5mm in the pad for +35 offset.(https://uploads.tapatalk-cdn.com/20181014/7baffe202957ee1bd3385528a887a363.jpg)(https://uploads.tapatalk-cdn.com/20181014/e21f9476c3e95d0610c2c26fbb8f4bf8.jpg)
Sent from my Pixel 2 XL using Tapatalk
Stereo progress continues!(https://uploads.tapatalk-cdn.com/20181016/322a7690b15687c53a8f357c46c2b7ae.jpg)(https://uploads.tapatalk-cdn.com/20181016/18c0b1a6d23635661096ef15e23159eb.jpg)(https://uploads.tapatalk-cdn.com/20181016/26f9b542d42ec138fc327068b2eb88bd.jpg)(https://uploads.tapatalk-cdn.com/20181016/7f1ef9252e8c6f57ed7a6fb241b65fad.jpg)
Sent from my Pixel 2 XL using Tapatalk
Custom one piece driveshaft finally showed up(https://uploads.tapatalk-cdn.com/20181018/aa13711dfc92d91474908b69f161b178.jpg)
Sent from my Pixel 2 XL using Tapatalk
Lightweight? Carbon Fiber?
Aluminum 1 piece vs steel 2 piece. The 2 piece won't survive 2 step and trans brake launches that will start happening soon. It's finally under 100 here. :)
I have a 5" 1-piece on my 350 Diesel... they are NICE!
Looks awesome so far!
Almost done, had to pick up a new remote, should be done this week, still trying to figure out the Raptor steering wheel.
(https://uploads.tapatalk-cdn.com/20181021/768e4dc3b5133b20b9272e3a5f09eced.jpg) (https://uploads.tapatalk-cdn.com/20181021/768e4dc3b5133b20b9272e3a5f09eced.jpg)(https://uploads.tapatalk-cdn.com/20181021/4f88caea945ec462843814ce30faf69f.jpg) (https://uploads.tapatalk-cdn.com/20181021/4f88caea945ec462843814ce30faf69f.jpg)(https://uploads.tapatalk-cdn.com/20181021/2924066f3b8ec1b1f2c0f357593954da.jpg) (https://uploads.tapatalk-cdn.com/20181021/2924066f3b8ec1b1f2c0f357593954da.jpg)(https://uploads.tapatalk-cdn.com/20181021/158aa94d19cd6a0c4a08b2ea355c18b5.jpg) (https://uploads.tapatalk-cdn.com/20181021/158aa94d19cd6a0c4a08b2ea355c18b5.jpg)
Sent from my Pixel 2 XL using Tapatalk
Center came out awesome(https://uploads.tapatalk-cdn.com/20181022/0564b5208d98c22b6f99234e15b8d3a4.jpg)(https://uploads.tapatalk-cdn.com/20181022/1dae4214deb284edae9d6e1c2f083593.jpg)
Sent from my Pixel 2 XL using Tapatalk
Almost time to finish the suspension(https://uploads.tapatalk-cdn.com/20181026/39ee54f72251938ac90acdcb972538e0.jpg)
Sent from my Pixel 2 XL using Tapatalk
Stereo is installed, I'm playing around with a ton of the settings but getting close.
Also put in the 2015+ clockspring to work with the 2017 Raptor steering wheel, this time also installed the new air bag. No codes or issues but not all buttons work and definitely not as expected. I ordered a 2015+ SCCM as that will hopefully have what I need to get the buttons all working.
Next will just to program it via Forscan
Video of setup as of tonight with steering wheel installed
http://youtu.be/_jt7d2brAs8 (http://youtu.be/_jt7d2brAs8)
New taillights and third brake light(https://uploads.tapatalk-cdn.com/20181102/74452e45fc4eb553d153bfc222375b19.jpg)
Sent from my Pixel 2 XL using Tapatalk
Quote from: EcoPowerParts on November 01, 2018, 08:48:47 PM
New taillights and third brake light(https://uploads.tapatalk-cdn.com/20181102/74452e45fc4eb553d153bfc222375b19.jpg)
Sent from my Pixel 2 XL using Tapatalk
Looks so mean! Beautiful truck!
New EcoBeast badge overlay. Also got a picture of the wife's super duty and my truck both clean at the same time
(https://uploads.tapatalk-cdn.com/20181110/f6510fbc0c744621d18acbad6574b6de.jpg) (https://uploads.tapatalk-cdn.com/20181110/f6510fbc0c744621d18acbad6574b6de.jpg)
(https://uploads.tapatalk-cdn.com/20181110/84dae079d3ad57a5e513671493ea172c.jpg) (https://uploads.tapatalk-cdn.com/20181110/84dae079d3ad57a5e513671493ea172c.jpg)
Sent from my Pixel 2 XL using Tapatalk
The overall truck and stance look Awesome! Enjoy. Z
I've been cutting up tires massively in the rear so this weekend I got annoyed, pulled the factory flares and cut the pinch welds where the tire was close and then bent the sheet metal out with pliers. Ugly, horrible and not cool BUT I'm not hitting my tires now :P
With the factory flares back on you can't see it and no tire issues. Long term I'm looking at doing a Liberty Walk style kit on the truck, hoping I can get Fiberwerx to make it for everyone.
Kit would install and work like the kit in this video, completely cut the factory fenders for tire clearance and give an additional 2" of offset available towards the outside for some nice deep dish wheels. My plan is 21x10 with 285/45 front and 21x13 with 325/40 in the rear. This way I can keep the factory fenders with just a mild installation required.
Here's a video of the Liberty Walk install on a Challenger
https://www.youtube.com/watch?v=27Jig4CRNi4 (https://www.youtube.com/watch?v=27Jig4CRNi4)
Got the new 2" dropped spindles and stock LCA powder coated in preparation for the last of the suspension install next week.
(https://uploads.tapatalk-cdn.com/20181114/7b206a4e2e64503daf15e627f888440e.jpg)(https://uploads.tapatalk-cdn.com/20181114/6a72a572c00e3a055e06427d76f3aec4.jpg)
Sent from my Pixel 2 XL using Tapatalk
Dropped the truck off to have new front suspension with coilovers, spindles and adjustable UCA and stock LCA installed, Fix the rear shock mounts (extend them so no more bottoming), new bump stops, sway bar and slamair bags.Also removing stock trailer hitch and doing a hide a hitch as well as installing the new driveshaft and modifying the gas tank cross member to fit the driveshaft.PHEW!
(https://uploads.tapatalk-cdn.com/20181121/55238e0dfa5d69322d383b7957caab54.jpg) (https://uploads.tapatalk-cdn.com/20181121/55238e0dfa5d69322d383b7957caab54.jpg)
Sent from my Pixel 2 XL using Tapatalk
Powder coated Red calipers to go with the stage 3 EBC brakes and rotors with stainless steel brake lines and dot 4 fluid.Going on with the suspension parts.(https://uploads.tapatalk-cdn.com/20181203/e106962b983f20638337dc65690779af.jpg)
Sent from my Pixel 2 XL using Tapatalk
A must-have part!
All calipers are done, just need to drop them off to get installed with rest of new brakes and new lines.
Progress(https://uploads.tapatalk-cdn.com/20181206/cc92113a8de1ba6f726a48e78ae3848e.jpg)(https://uploads.tapatalk-cdn.com/20181206/0b367ca50a9199734c2ce85afa2f3e68.jpg)
Sent from my Pixel 2 XL using Tapatalk
Nice! I wish the rotor color would stay tho. Super cool like that :)
So the spindles pushed the wheels out 1/2", back to stock 20's for a bit until I can get my custom flare kit made. :(
Sent from my Pixel 2 XL using Tapatalk
Good things are worth the wait :D
Ordered stock 15 spindles, new dropped control arms, I can't roll in stock wheels...
Sent from my Pixel 2 XL using Tapatalk
Doing some 3D printing of a SHO prototype pod in PLA, hopefully one last test fit them production.
https://youtu.be/mJvwc25hSaw
Sent from my Pixel 2 XL using Tapatalk
Finally got the Raptor steering wheel working! Just have to finalize a couple more parts on the harness. Also need to find a source for Ford parts at wholesale, no luck with that so far. This kit will work with all 11-14 F150 with either console or column shift.
https://photos.app.goo.gl/5ZGVqNmJVejLCiMJ6
Sent from my Pixel 2 XL using Tapatalk
not sure about wholesale pricing, but you can regularly get 30% off at online ford dealer sites. That is direct to consumer pricing.
Quote from: SHOdded on March 04, 2019, 03:10:25 AM
not sure about wholesale pricing, but you can regularly get 30% off at online ford dealer sites. That is direct to consumer pricing.
Understood, need to be able to source steering wheels to sell so buying at customer pricing then taking a hit on shipping to me and then CC/Paypal fees = a loss. :) Have to get around that loss.
Doing a custom bumper cover and ordered my air to water intercooler core today so I can make a all-in-one air water intercooler/ reservoir and heat exchanger(https://uploads.tapatalk-cdn.com/20190416/5191bd1a3c8422d61df90e4391135e72.jpg)
Sent from my Pixel 2 XL using Tapatalk
All done! Picking it up tomorrow, they're installing the backup sensors and removing the Earnhardt sticker for me.(https://uploads.tapatalk-cdn.com/20190419/fe31cf44dd9193ab3343c0f4b70bfc8f.jpg)(https://uploads.tapatalk-cdn.com/20190419/fb6e9d2a239b7b5d1df9433a0ec868a1.jpg)(https://uploads.tapatalk-cdn.com/20190419/bcf570e71ad3aea00f7ede7d72f6a124.jpg)(https://uploads.tapatalk-cdn.com/20190419/c485df1f4139690153238faf6e6b3f7f.jpg)(https://uploads.tapatalk-cdn.com/20190419/5183bcd638b2ed55cdcc7a48136a5912.jpg)(https://uploads.tapatalk-cdn.com/20190419/f3188c75e8a08e3ddc2a2908a7c1857f.jpg)
Sent from my Pixel 2 XL using Tapatalk
A bit of Lightning character :)
Eagle rods showed up this week as well, time to build this engine!(https://uploads.tapatalk-cdn.com/20190419/4191de89cea69ba960304b2de6e2b675.jpg)
Sent from my Pixel 2 XL using Tapatalk
Rest of the rotating assembly is strong enough?
Quote from: SHOdded on April 19, 2019, 12:07:31 PM
Rest of the rotating assembly is strong enough?
Definitely, just the crank and only planning for around 600-700 whp
Sent from my Pixel 2 XL using Tapatalk
Love how this turned out. Next step is 21x9.5 and 21x12 wheels with 285/45 and 325/40 tires(https://uploads.tapatalk-cdn.com/20190419/b98ceb643c9d2e2cbe194e2b0be8b6a4.jpg)(https://uploads.tapatalk-cdn.com/20190419/1ca1d1afd47f63157b05068809dfbc41.jpg)(https://uploads.tapatalk-cdn.com/20190419/b61d44183ae239587b5620d8424f6b1f.jpg)(https://uploads.tapatalk-cdn.com/20190419/619f8c34d186f1cc3b3c213e252269b9.jpg)
Sent from my Pixel 2 XL using Tapatalk
Found the heat exchanger for our upcoming air to water intercooler for the F150. Next weekend the intercooler, tank and pump mount will be fabbed up. Also reaching out to the manufacturer to have all the connections on the back side so front is clean.
(https://uploads.tapatalk-cdn.com/20190505/a065e050a7333970a7edd99682a01f73.jpg)(https://uploads.tapatalk-cdn.com/20190505/8c461da2ce35fdae3e8b521456cfa06b.jpg)(https://uploads.tapatalk-cdn.com/20190505/947d6272e3cdec9b145ede4933d5e4d5.jpg)
Sent from my Pixel 2 XL using Tapatalk
Quote from: EcoPowerParts on May 04, 2019, 10:20:21 PM
Found the heat exchanger for our upcoming air to water intercooler for the F150. Next weekend the intercooler, tank and pump mount will be fabbed up. Also reaching out to the manufacturer to have all the connections on the back side so front is clean.
(https://uploads.tapatalk-cdn.com/20190505/a065e050a7333970a7edd99682a01f73.jpg)(https://uploads.tapatalk-cdn.com/20190505/8c461da2ce35fdae3e8b521456cfa06b.jpg)(https://uploads.tapatalk-cdn.com/20190505/947d6272e3cdec9b145ede4933d5e4d5.jpg)
Sent from my Pixel 2 XL using Tapatalk
Looks mean as **** and I like the openness of the grille...the mesh is so thin its close to a grille delete.
Some pictures from our weekend trip to finalize our renuptials in Sedona this July for our 25th anniversary. Wife even suggested I take some pictures.
(https://uploads.tapatalk-cdn.com/20190519/9e1d63a1499e577ca4d6474cf7f463f9.jpg)(https://uploads.tapatalk-cdn.com/20190519/3b78a7542b9dfb6787c90de10d56a960.jpg)(https://uploads.tapatalk-cdn.com/20190519/862fa2346d12c3e812bf83b29d7f0fe0.jpg)(https://uploads.tapatalk-cdn.com/20190519/a6f80272143ebe69ba5f28bc51d3e2bd.jpg)(https://uploads.tapatalk-cdn.com/20190519/c51d041bb254aa0b84ef647a01db5dbf.jpg)(https://uploads.tapatalk-cdn.com/20190519/3430d5947e71b6c2913a79bb0f951ea3.jpg)
Sent from my Pixel 2 XL using Tapatalk
Looks sweeeet
Congrats, and here's to another 25 years!!!
Air to water intercooler intercooler for the F150, this should outperform every air to air setup available currently and with a killer chiller give me sub ambient IAT.(https://uploads.tapatalk-cdn.com/20190528/3cc9665dcce6455b0a1ca1e8aaa413b5.jpg)(https://uploads.tapatalk-cdn.com/20190528/3aeff8c97f00aead3ec15fb043452fcf.jpg)(https://uploads.tapatalk-cdn.com/20190528/ec1d93d776730498ebc91155addd12a3.jpg)(https://uploads.tapatalk-cdn.com/20190528/be1912cf99687cf2d2ec50af73484bb8.jpg)(https://uploads.tapatalk-cdn.com/20190528/f89673ef716a510a79e64f4022f9dd27.jpg)(https://uploads.tapatalk-cdn.com/20190528/59cc42dd9d47b0f55e473164be460e5f.jpg)
Sent from my Pixel 2 XL using Tapatalk
Sub ambient?! Can't wait to see what that can do in this harsh Phoenix heat.
Quote from: FearlessAZ on May 28, 2019, 07:33:09 AM
Sub ambient?! Can't wait to see what that can do in this harsh Phoenix heat.
I agree, keep up the good work Mike.
CTSV rear suspension for the Tremor, should make a huge ride improvement.(https://uploads.tapatalk-cdn.com/20190529/0656b518a71e67f527858ab49a5cf89d.jpg)
Sent from my Pixel 2 XL using Tapatalk
Time for some corn!(https://uploads.tapatalk-cdn.com/20190830/b33a7fc707609a019ec274ebcf3bb3cb.jpg)
Sent from my Pixel 2 XL using Tapatalk
Been a minute since I posted here...
Prototyped an air to water setup on the Tremor, hose routing is temporary, we'll do some 90's and make it a ton cleaner but wanted to get it testing.
Some pictures:
https://photos.app.goo.gl/Q1L8JtN8tBpHUNsr6 (https://photos.app.goo.gl/Q1L8JtN8tBpHUNsr6)
https://photos.app.goo.gl/c5tadXLvvjA6dXN18 (https://photos.app.goo.gl/c5tadXLvvjA6dXN18)
https://photos.app.goo.gl/JSKXypGY9QrP4A289 (https://photos.app.goo.gl/JSKXypGY9QrP4A289)