Which looks exactly like this...
Bosch HDP5
http://www.powerongroup.it/BOSCH/pdf/Injection%20&%20ignition/fuel%20pumps/HDP_5.pdfNote: You will see this pump with differing supply and output locations
"unleaded fuels, E22, E85, M15"
I find it curious that Ford switched injector O rings to accommodate methanol in 2014
The methanol industry has started to get very vocal and at the same time the political winds regarding E-85 have started to go the other way...
Then there's this...
"Please notice: Fuel delivery and maximum
driveshaft speed depends on cam profile and type
of tappet. Higher flow rates are only achievable at
lower max. speeds"
How does slower speed give it higher flow?