hey guys,
Very happy because I just got my turbos rebuilt w/ billet wheels and downpipes etc and car is back on the road.
After a few days I was getting a misfire in cylinder 3. I changed the plug last night and it's running good now.
however, the old plug was coated in oil so I'm sure I need to at least replace the rear valve cover gasket/plug seals.
Anyone know of a write-up or resource showing the removal of the valve cover on the rear and maybe front also?
I'll prob do this myself but I haven't taken a good look yet to see what all needs to come off and how much of a PITA it might be.
Thanks
This may help http://www.nicksmustangranch.com/Service_Manuals/2014_Taurus/Service%20Manual.htm
Sent from my Pixel 2 XL using Tapatalk
Did not see your signature! What exact application is this for!
Tab of Black RTV sealant on each corner is ideal. Z
https://www.youtube.com/embed/gNFXNdNIPr8
Quote from: ZSHO on May 30, 2019, 04:05:00 PM
Did not see your signature! What exact application is this for!
Tab of Black RTV sealant on each corner is ideal. Z
https://www.youtube.com/embed/gNFXNdNIPr8
Good tip. Thanks - updated sig too
Quote from: Gjkrisa on May 30, 2019, 01:35:57 PM
This may help http://www.nicksmustangranch.com/Service_Manuals/2014_Taurus/Service%20Manual.htm (http://www.nicksmustangranch.com/Service_Manuals/2014_Taurus/Service%20Manual.htm)
Sent from my Pixel 2 XL using Tapatalk
Perfect!!!! Thank you sir!
All was good for a few days. Now I have a misifre in cyl 4. Need to get those gaskets changed this weekend.
Just to confirm is this correct?
--firewall--
--1--2--3--
--4--5--6--
--radiator--
Correct.