http://youtu.be/ADxMLGMWPpo
Which BOV is that?
I noticed when I purchased the Turbosmart VeePort to use on my SHO they offered one as a direct replacement for F150's.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Stock BOV, VTA.
As soon as the weather breaks here in Chi-Beria.....
I'll be capturing a short video/audio clip of my stock BOV VTA.
It sounds wicked since I've installed the hard/hot pipes. Very happy!
My stock valves vented to atmosphere don't make any noise at all!
(http://img.tapatalk.com/d/14/01/09/ydahetem.jpg)
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Ha! Gee.... I wonder why not? :hmmm:
Silly :rofl2:
Sent from my DROID RAZR HD using Tapatalk
Quote from: ONLYA6 on January 08, 2014, 01:23:32 PM
My stock valves vented to atmosphere don't make any noise at all!
(http://img.tapatalk.com/d/14/01/09/ydahetem.jpg)
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Ok it looks like you've upgraded your hot pipes and have your stock BOV's off the hot pipes. So did you go with the Tial BOV? I don't see it in the picture.
Quote from: crash712us on January 08, 2014, 03:01:28 PM
Quote from: ONLYA6 on January 08, 2014, 01:23:32 PM
My stock valves vented to atmosphere don't make any noise at all!
(http://img.tapatalk.com/d/14/01/09/ydahetem.jpg)
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Ok it looks like you've upgraded your hot pipes and have your stock BOV's off the hot pipes. So did you go with the Tial BOV? I don't see it in the picture.
I'm wondering where the functioning BoV is also....??
I have a feeling why there is no blow off sound. But I don't want to assume anything to soon.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Quote from: crash712us on January 08, 2014, 04:49:08 PM
I have a feeling why there is no blow off sound. But I don't want to assume anything to soon.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Me2
I went with a Turbosmart VeePort Instead. I like their products - high quality and super easy to adjust. Turn the valve all the way to soft initially, let the engine warm up, rev the car a few times, turned it 1 turn for a harder close, went for a drive, backed it off 1/4 turn. Done. No springs or shims to swap combinations. Oh yea, and it isn't obnoxiously loud - just a faint woosh.
Hopefully LMS can trick the computer into thinking the stockers are still thereso I don't have to leave them hooked up to prevent a CEL. If not, I already made an extension harness to put them in the fender well. Just need to depin the factory connector relocate it to the extension and put the new connector on. Then if I ever go back to stock just take the extension off and swap connectors.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
(http://img.tapatalk.com/d/14/01/09/y6agyras.jpg)
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Looks good!
Sent from my SCH-I545 using Tapatalk
Which model of VeePort did you use?
I like the idea of the harness extender for the reasons you state and jus reducing clutter in the crowded engine compartment. If it works please post. TIA
4DR was showing me this when I was by BMR the other day... As I remember it, he has found that unplugging the BoV and sensor toward the front had no effect, but he says as soon as he unplugged the one nearer the firewall he threw a CEL. Maybe he'll chime in and correct me if I'm wrong here.
Pro - universal
BLUE: TS-0205-1130
BLACK: TS-0205-1131
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
:thankyou:
That sound and a tune and were golden...
Quote from: ONLYA6 on January 08, 2014, 07:01:51 AM
Which BOV is that?
I noticed when I purchased the Turbosmart VeePort to use on my SHO they offered one as a direct replacement for F150's.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
It's stock. Just the recirc pipe is disconnected. Plugged the intake holes
Quote from: ONLYA6 on January 08, 2014, 01:23:32 PM
My stock valves vented to atmosphere don't make any noise at all!
(http://img.tapatalk.com/d/14/01/09/ydahetem.jpg)
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Sorry. What am I looking @?
Quote from: ONLYA6 on January 08, 2014, 06:01:38 PM
(http://img.tapatalk.com/d/14/01/09/y6agyras.jpg)
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Yup I still don't see Waldo
The kandn filter is now a plug
Quote from: 2Canches on January 09, 2014, 04:53:24 AM
The kandn filter is now a plug
canchè, where'd you get that filter? I just have a PB Blaster cap taped to mine. I call it the "RedNeck BOV Cap TM". Came up with that on my own by the way.
I googled it on KandN & ordered them off eBay. But after much talk. I capped them. I still want to put a kazoo on the out pipe haha
Stock best 14.87s @ 91mph
i troll these streets eH
Quote from: 2Canches on May 11, 2014, 07:35:45 PM
I googled it on KandN & ordered them off eBay. But after much talk. I capped them. I still want to put a kazoo on the out pipe haha
Stock best 14.87s @ 91mph
i troll these streets eH
Not sure that "eh" sounds good out of a kazoo...
Might be better off with a whoopie cushion.
that was my second thought
Stock best 14.87s @ 91mph
i troll these streets eH
Your truck would sound like The Fonzie!
Quote from: leverkyle on May 11, 2014, 08:10:25 PM
Your truck would sound like The Fonzie!
On helium...