I just got the upgraded engine torque struts but cannot find anything online on what they are suppose to be torqued down to. Any chance anyone can link me some information in regards to them?
Not sure which part you are trying to change?
Description Nm lb-ft lb-in
Transaxle support insulator bracket-to-transaxle bolt 80 59 —
Transaxle support insulator bracket-to-transaxle nuts 63 46 —
Roll restrictor bolts 103 76 —
Roll restrictor bracket bolts 90 66 —
Transaxle support insulator bolts 55 41 —
Transaxle support insulator bracket bolt 80 59 —
Transaxle support insulator bracket nuts 63 46 —
Transaxle support insulator through bolt 175 129 —
https://parts.levittownfordparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/engine-cat/engine-and-trans-mounting-scat
(https://dz310nzuyimx0.cloudfront.net/strapr1/9516d18fcef79723e94f43d378ee6c1c/bf906872b3413b95663a79a543a7c23e.png)
Parts 1, 8, 13, 17 are engine/trans mount related.
Looks like it is 13 and 17, I guess Ford calls them torque arms. I always though it was just called a front and rear motor mount. I am assuming roll restrictor bolts are 16 and and 19?
Looks like you would need 16, 18, and 19. Although probably not torquetoyield, always good to replace fasteners exposed to the elements.
X2- Agreed especially us folks that dwell in salt States. Z