Print Page - Is this a 2bar or 3bar map sensor?

Title: Is this a 2bar or 3bar map sensor?
Post by: 13tuxblack on February 10, 2020, 05:47:26 PM

Hello everyone,

Just a got a '13 SHO from a dealership, and the previous owner had put on a LMS air filter assembly.

I was wondering if they may have added anything else as well, particularly the map sensor.

Aa5a-9f479-ca is the manifold map sensor, can anyone tell by that # if its a 2bar or 3bar?

Also is there a link where I can put in my vin to see if its a pp sho?

Thanks for the help!

Gabe

(https://uploads.tapatalk-cdn.com/20200210/c47f4bdc852a03449d6f8a864b5cfcc4.jpg)

Sent from my SM-G965U using Tapatalk

Title: Re: Is this a 2bar or 3bar map sensor?
Post by: ZSHO on February 10, 2020, 07:14:29 PM

That's the stock 2-Bar map sensor that ends in CA. Due post an Intro at your earliest convenience and if you have any questions feel free to ask and welcome aboard. Z :WELCOME:

https://www.ecoboostperformanceforum.com/index.php/board,14.0.html (https://www.ecoboostperformanceforum.com/index.php/board,14.0.html)

Title: Re: Is this a 2bar or 3bar map sensor?
Post by: 13tuxblack on February 10, 2020, 10:06:09 PM

Thanks, kinda figured but wanted to make sure.

Also found out its a non pp.

Sent from my SM-G965U using Tapatalk

Ecoboost Performance Forum

Ecoboost Performance => Troubleshooting, Maintenance, TSB Articles => Troubleshooting => Topic started by: 13tuxblack on February 10, 2020, 05:47:26 PM