Howdy folks!
So I finally got off my butt and ordered up replacement LED units for the bulbs in my 2013 SHO, I ended up ordering most of my parts from
SuperBrightLEDs.com as that seemed to be the preferred site over all. Also a huge thanks to
b33615 for the "how to" guide on spray tinting, my tail light units turned out perfect.
So here is the issue I am having, also note that my load balance resisters shipped separate from my bulbs for some reason and will arrive this weekend.
I ordered 2 of these
3157-AW60-SA Amber White for the front turn/running lights.
What is odd is with the headlight switch in the off position the front turn signals work intermittently, but when they do work they blink at normal speed. There does not seem to be any rhyme or reason to when they will or will not work, but it effects both sides at the same time.
With the headlight switch in either the marker light or headlight position the blinkers always work but hyper blink, I assume the load resistors will take care of the hyper blink issue, but whats going on with the headlight switch in the off position is a head scratch-er.
Another thing to note, when the turn signals are not working replacing the LEDs with to original 3457s the turn signals do not start working again right away, but once they do they work fine until I put the LEDs back in.....
I'm not getting any errors and my Livernos scanner is showing no codes in the ECU.
Thanks!