Post up whatever random things that are going on with you, pictures, car stuff whatever.
My random thought for the day, must fix boost leaks and get dual in tank fuel pumps finalized!!!
Waiting on another severe thunderstorm. Need to raise the dock because of lake level rising.
Waiting on parts to fix G8. AAMCO determined Flex Plate bolts to crank were loose and Flex Plate needs replacing.
May go to VFW for $1. beer for happy hour.
Waiting for more storms here. Anxious to get on the road today and see how the TPMS does.
Wishing for a rainstorm here...115 by Friday is not looking like fun...
Hoping there's no truth to the idea that a tsunami hit the East Coast causing the rainy weather ...
I bought one of these yesterday!
http://www.ebay.com/itm/400482546567?item=400482546567&viewitem=&sspagename=ADME:L:OU:US:3160&vxp=mtr (http://www.ebay.com/itm/400482546567?item=400482546567&viewitem=&sspagename=ADME:L:OU:US:3160&vxp=mtr)
It's on it's way, just in time because I talked to Andy@Squash Performance and he's going to send out a new billet "hat" for me to try in place of the stock fuel pump, if that fits then he'll make my setup SOON!!!
I got a laugh out of this one today on Facebook (and it helps I own verison of each car ;))
(http://i14.photobucket.com/albums/a337/sdimmick/Mustang_PI_zps970c855d.jpg)
I finally broke down and washed the Brick. Front wheels were so bad from Stop Tech brake pads, that I didn't recognize them clean!
Watching and waiting for more thunderstorms...this weather has raised water levels so there's no diving going on and the weather won't allow for detailing the car....ahh, but it's still better then 20 degrees, windy, and snow!
It has finally been nice out here. The last report showed pretty good weather through the weekend. You usually get your weather the day after us so, keep your chin up. It's coming!
Right now were getting a front coming from the south, and it's supposed to rain every day through the week=end. We are under flash flood watch and some counties have already experienced flooding.
Quote from: mjhpadi on July 01, 2013, 02:28:42 PM
Right now were getting a front coming from the south, and it's supposed to rain every day through the week=end. We are under flash flood watch and some counties have already experienced flooding.
Your dealing with that crap too? We had flooding about 5 minutes from where I live at over the weekend, while I was in Jersey for a wedding. They even had a funnel cloud touch down near Elkton, MD!
Yes, we've been lucky (so far) most of the worst has went either east or west of us. I know that Philadelphia and Jersey look like they are getting it and also to our northwest has some heavy weather.
Got the plasti dip done on my SHO but I now have blisters on 2 fingers because I was rubbing down the overspray off the paint. I also had plain to finish a bit of painting in the house but with them stupid blisters i might have to wait a couple of days.
Waiting for the call from Stainless Works telling me my Sho is complete. Its been too long since I've driven her.
Ordering White with Black Print Oval Emblem Overlays with my ebay bucks. Still waiting on license plates from IL and emblems from LMS. Now, I am anxious to get ECOBOOST PERFORMANCE FORUM stickers!
(http://i1090.photobucket.com/albums/i380/bigpelo/4x4vstuning_zps33aaf88d.jpg) (http://s1090.photobucket.com/user/bigpelo/media/4x4vstuning_zps33aaf88d.jpg.html)
How I feel today, being a Slave to my kids and grandkids... NO way to slow them down!
(http://i334.photobucket.com/albums/m406/RobMoser/130104-214407.jpg) (http://s334.photobucket.com/user/RobMoser/media/130104-214407.jpg.html)
Quote from: DJE624 on July 01, 2013, 07:54:20 PM
Now, I am anxious to get ECOBOOST PERFORMANCE FORUM stickers!
Hoping to have them ready to go out in a couple weeks!
Sent from my mobile gizmo
My random thought for the whole weekend is to remember not to maul the UPS man Monday cause my Unleashed SCT is on his truck !!!
LOL, I'll be all over the post man Monday and Tuesday for my overlays, not to mention daily for my plates!
Quote from: painterpatt on July 07, 2013, 09:20:17 PM
My random thought for the whole weekend is to remember not to maul the UPS man Monday cause my Unleashed SCT is on his truck !!!
You won't be sorry. Enjoy!!
Quote from: DJE624 on July 07, 2013, 09:23:35 PM
LOL, I'll be all over the post man Monday and Tuesday for my overlays, not to mention daily for my plates!
You think you have it bad!!!!!! 1st LMS gave FEDEX the wrong street name,2nd FEDEX did not tell me someone had to be home to sign for it until the 3rd time trying to deliver my new down-pipes,3rd LMS sent down-pipe for a f-150 not the SHO!4th Now I'm waying for the SHO pipe to come,5th this hold time I order my METH KIT at the same time and no meth LMS still haven't got in the parts!!!!!!!
That's a bummer Shoman. My Fedex guy called me to make sure I'd be there.
Quote from: shoman04 on July 08, 2013, 12:03:10 PM
Quote from: DJE624 on July 07, 2013, 09:23:35 PM
LOL, I'll be all over the post man Monday and Tuesday for my overlays, not to mention daily for my plates!
You think you have it bad!!!!!! 1st LMS gave FEDEX the wrong street name,2nd FEDEX did not tell me someone had to be home to sign for it until the 3rd time trying to deliver my new down-pipes,3rd LMS sent down-pipe for a f-150 not the SHO!4th Now I'm waying for the SHO pipe to come,5th this hold time I order my METH KIT at the same time and no meth LMS still haven't got in the parts!!!!!!!
May I suggest PPE pipes and Alky Control meth kit directly from the manufacturer?
:)
Cancel your orders :P
thats ruff man, I hope they get that corrected and overnight that stuff to you. Seeing as you have had to go threw all that just to find out its the wrong part. Would be a sign of great customer service ;D
4drhtrd is a good one 2
I am on the war path. I'm sick of waiting for people to do a good job. My plates are "in the mail", my emblems from LMS never showed up, my oval overlays look like s*** and I emailed my boss this morning and haven't heard back from him all day (besides other slackings). On the other hand, I love my Hub overlays and highly recommend them!
Quote from: DJE624 on July 08, 2013, 08:17:43 PM
I am on the war path. I'm sick of waiting for people to do a good job. My plates are "in the mail", my emblems from LMS never showed up, my oval overlays look like s*** and I emailed my boss this morning and haven't heard back from him all day (besides other slackings). On the other hand, I love my Hub overlays and highly recommend them!
What emblems from Livernois are you waiting for?
I tried to order two of the Black and White emblems online. The minimum shipping was $15. So I wrote to complain. Dan answered and told me to talk to Chad or Jason. So I did and they said they would just send them to me. Either Chad or Jason was supposed to have the other send them out. A week later, one of those guys is gone and the one still there says he'll send them out. Another week or so I talked to Anthony and he said he would send them out. Now, it's another week.
Quote from: DJE624 on July 08, 2013, 09:27:14 PM
I tried to order two of the Black and White emblems online. The minimum shipping was $15. So I wrote to complain. Dan answered and told me to talk to Chad or Jason. So I did and they said they would just send them to me. Either Chad or Jason was supposed to have the other send them out. A week later, one of those guys is gone and the one still there says he'll send them out. Another week or so I talked to Anthony and he said he would send them out. Now, it's another week.
I'll see what I can do..worst case scenario "I'll" send them to you
Thanks Man! You made my day!
I'm a little ticked as I wont be able to do much for the next week or so... I was attacked by my cat 2 days ago. I wasn't aware there was a cat on the other side of the patio door so when I tried to move him away from the door his instincts kicked in and he went ape s*it on me. I usually open the blinds first but this time I didn't....
It was the first time I was seeing my own flesh and spilled so much of my blood. I didn't know them little bastard could be so vicious. On my left hand I have a hole right to the bone and inside a 2" laceration and multiple surface scratch. In my right hand I have 3 1" lacerations, a 3/4" laceration on my thumb, on my forearm 4 holes the depth of his claws (and in one of them I had to remove the claw) and multiple surface scratch.
So yeah my hands are in bad shape. I can do very light work but anything else is painful. Even driving hurts and it's not like the SHO has a heavy steering.
And for those wondering, yeah I still have my cat... it's not in his habit to be like that and I've had him for 7 years.
Wow, that cat has a tiger's heritage for sure! Get better soon.
Well...the Megan Racing coilovers came in today...hopefully the SHO and the Flex are close enough that they fit. Looking for luck to change since the torque converter was the wrong part number. Good news on that is Chris should have received my factory tc this am by 10 and hopin g to have it back by friday morning!
Quote from: PopolZ on July 09, 2013, 06:32:54 AM
I'm a little ticked as I wont be able to do much for the next week or so... I was attacked by my cat 2 days ago. I wasn't aware there was a cat on the other side of the patio door so when I tried to move him away from the door his instincts kicked in and he went ape s*it on me. I usually open the blinds first but this time I didn't....
It was the first time I was seeing my own flesh and spilled so much of my blood. I didn't know them little bastard could be so vicious. On my left hand I have a hole right to the bone and inside a 2" laceration and multiple surface scratch. In my right hand I have 3 1" lacerations, a 3/4" laceration on my thumb, on my forearm 4 holes the depth of his claws (and in one of them I had to remove the claw) and multiple surface scratch.
So yeah my hands are in bad shape. I can do very light work but anything else is painful. Even driving hurts and it's not like the SHO has a heavy steering.
And for those wondering, yeah I still have my cat... it's not in his habit to be like that and I've had him for 7 years.
That cat would be LONG gone after that! Then again, I'm not a huge cat person. Hope you get better soon!
Sent from my mobile gizmo
After Darrell helped me out today, by making my problem known, I had the pleasure of actually speaking with Dan from Livernois. He wanted to call me! He is a great guy! He is not above handling the pettiest of complaints. (Mine.) I was ranting about various things yesterday and included Livernois in my rantings. Today however, I have placed Dan and Livernois back on their rightfully deserved pedestal. Did I mention that they have one helluva tune for our SHO's!?! ;D
Glad you're feeling better about LMS...any word on the stickers?
I have to send the crummy ovals back to the eBay guy. The good ovals and the LMS are on their way. Hopefully by Saturday I'll just be waiting on my plates.
Quote from: DJE624 on July 10, 2013, 12:40:43 PM
I have to send the crummy ovals back to the eBay guy. The good ovals and the LMS are on their way. Hopefully by Saturday I'll just be waiting on my plates.
I believe a hat and t shirt are on their way as well. Chad did leave on two days notice so we apologize that you were never originally sent the stickers. I'll be sure to talk to Jason and Anthony about the issue, thanks for your patience!
Wow! That's great! I will wear my hat proudly. Don't know about the shirt. I'm a pretty big guy. (XXL) If it's too small, I'll make my daughter wear it! Thanks guys! ;D
Please don't be too tough on Jason and Anthony. They are both good guys.
They are great salesman and we all forget things from time to time, just so happens they forgot at the same time!
Hat and shirt...great score Dave!
Just call me Kid Livernois! :biggrin:
Still like my trunk look:
(http://i1289.photobucket.com/albums/b503/mjh17746/0fafaf1f-59b8-49ab-ab75-3e8f826351cb_zps2b1ffa86.jpg) (http://s1289.photobucket.com/user/mjh17746/media/0fafaf1f-59b8-49ab-ab75-3e8f826351cb_zps2b1ffa86.jpg.html)
I woke up after dreaming I sold my SHO for a Dodge Dually -- I have no idea where that came from.
That was a nightmare.
I watched Inception for first time last night -- I think that was the problem.
I had to walk outside and see if my SHO was still in the parking garage to realize I was in fact in realty.
:biggrin: :biggrin: :biggrin:
got my stupid mufflers after a month of waiting... the weather is nice for the first time in I don't know how long and I can't install them because my hands hurt too much. FML
Take it to shop?
I don't install much myself, I just pay minions to do it for me.
Sent from my SCH-I545 using Tapatalk 4 Beta
My kids turned me onto some new TV Show titled "Under The Dome".
Actually a fairly interesting show.... anyone else seen it yet? I believe this past Monday was the 3rd episode to have aired.
Sent from my DROID3 using Tapatalk 2
ohhh I totally forgot about that show! Thanks for the reminder!
Put the SHO away for the next few days.
Tomorrow I drive the Shelby GT-C. Going to get stripes quoted. The ones on the car are the 4th set from Shelby gone bad. Its horrible.
Going to paint them on this time. Once and for all.
(http://i185.photobucket.com/albums/x316/wmFlipper/IMAG0362-1.jpg) (http://s185.photobucket.com/user/wmFlipper/media/IMAG0362-1.jpg.html)
Here is my sons car. He loves the thing. Too Scary fast for Pops..
(http://i185.photobucket.com/albums/x316/wmFlipper/gt.jpg) (http://s185.photobucket.com/user/wmFlipper/media/gt.jpg.html)
My Depot Hack....
(http://i185.photobucket.com/albums/x316/wmFlipper/MVC-451S.jpg) (http://s185.photobucket.com/user/wmFlipper/media/MVC-451S.jpg.html)
And sometimes my weekend driver..... on a good and sunny day.
(http://i185.photobucket.com/albums/x316/wmFlipper/porsche.jpg) (http://s185.photobucket.com/user/wmFlipper/media/porsche.jpg.html)
I like the School Bus Yellow with Silver!
Grabber Orange They call it.........
Quote from: FLIP-4-SHO on July 11, 2013, 11:05:36 PM
Grabber Orange They call it.........
Sorry, There was a School Bus Yellow Mustang sometime since the '05's came out wasn't there? Or maybe it was a stripe color?
I looked again. Definitely Orange.
Here's my thought;
I'm disappointed in my SHO. I was just destroyed by a 2.0L Supercharged Cobalt SS. It was enough to piss my morning off.
I really hope the turbos, meth, and 400awhp make a difference otherwise I may just say screw it and go buy a GT500 like I originally planned.
Quote from: geswek on July 12, 2013, 08:33:06 AM
Here's my thought;
I'm disappointed in my SHO. I was just destroyed by a 2.0L Supercharged Cobalt SS. It was enough to piss my morning off.
I really hope the turbos, meth, and 400awhp make a difference otherwise I may just say screw it and go buy a GT500 like I originally planned.
Don't be so hard on it. You went up against a go-cart that weighs half of your Sho. I had a TC balt and those bastards can be made to go really fast. Even having a low 12 second Sho with future mods can still leave you on the short end against shittier cars.
Quote from: geswek on July 12, 2013, 08:33:06 AM
Here's my thought;
I'm disappointed in my SHO. I was just destroyed by a 2.0L Supercharged Cobalt SS. It was enough to piss my morning off.
I really hope the turbos, meth, and 400awhp make a difference otherwise I may just say screw it and go buy a GT500 like I originally planned.
No matter how much you modify somebody will be faster, always! No matter how much money you have somebody has more, always!
I bought my Flex because I could fit in it and eventually I could make it "quick". A 12 second car rules 90% of the street but there's still 10% out there that will kick your ass. Keep going down in times and that percentage keeps going down. A GT500 give you way more power but also way less traction on the street, I've beat them at the track due to wheel spin.
Have fun with whatever you decide but just remember that a GT500 will get destroyed by a GT-R :)
If only our cars were 500-750lbs lighter
Quote from: 4DRHTRD on July 12, 2013, 08:55:11 AMNo matter how much you modify somebody will be faster, always! No matter how much money you have somebody has more, always!
I bought my Flex because I could fit in it and eventually I could make it "quick". A 12 second car rules 90% of the street but there's still 10% out there that will kick your ass. Keep going down in times and that percentage keeps going down. A GT500 give you way more power but also way less traction on the street, I've beat them at the track due to wheel spin.
Have fun with whatever you decide but just remember that a GT500 will get destroyed by a GT-R :)
Oh I'm just going to upgrade turbos and meth and have fun AHHA.
I still love my SHO.
:beer:
Quote from: geswek on July 12, 2013, 09:15:59 AM
Quote from: 4DRHTRD on July 12, 2013, 08:55:11 AMNo matter how much you modify somebody will be faster, always! No matter how much money you have somebody has more, always!
I bought my Flex because I could fit in it and eventually I could make it "quick". A 12 second car rules 90% of the street but there's still 10% out there that will kick your ass. Keep going down in times and that percentage keeps going down. A GT500 give you way more power but also way less traction on the street, I've beat them at the track due to wheel spin.
Have fun with whatever you decide but just remember that a GT500 will get destroyed by a GT-R :)
Oh I'm just going to upgrade turbos and meth and have fun AHHA.
I still love my SHO.
:beer:
So when should I schedule you to come in and have these options installed? ;D
Quote from: Livernois Motorsports on July 12, 2013, 09:17:34 AM
So when should I schedule you to come in and have these options installed? ;D
Soon my friend!
Let me rearrange some things; maybe this winter we can schedule it since you'll have my car for about 5 weeks. It would keep it out of the snow too. ;)
Quote from: geswek on July 12, 2013, 09:23:13 AM
Quote from: Livernois Motorsports on July 12, 2013, 09:17:34 AM
So when should I schedule you to come in and have these options installed? ;D
Soon my friend!
Let me rearrange some things; maybe this winter we can schedule it since you'll have my car for about 5 weeks. It would keep it out of the snow too. ;)
Well if you have your car here for the winter it may be parked outside during the day but it does come inside every night no matter what time of the year. We NEVER leave customers cars parked outside over night. -Chris
Quote from: geswek on July 12, 2013, 09:15:59 AM
Quote from: 4DRHTRD on July 12, 2013, 08:55:11 AMNo matter how much you modify somebody will be faster, always! No matter how much money you have somebody has more, always!
I bought my Flex because I could fit in it and eventually I could make it "quick". A 12 second car rules 90% of the street but there's still 10% out there that will kick your ass. Keep going down in times and that percentage keeps going down. A GT500 give you way more power but also way less traction on the street, I've beat them at the track due to wheel spin.
Have fun with whatever you decide but just remember that a GT500 will get destroyed by a GT-R :)
Oh I'm just going to upgrade turbos and meth and have fun AHHA.
I still love my SHO.
:beer:
90% ain't bad. Especially for a full size luxury sedan. I love my SHO for the size, comfort, decent handling, great looks and of course the power. It is the perfect combination for me.
Quote from: FLIP-4-SHO on July 11, 2013, 10:45:19 PM
Put the SHO away for the next few days.
Tomorrow I drive the Shelby GT-C. Going to get stripes quoted.
The ones on the car are the 4th set from Shelby gone bad.
It's horrible.
Going to paint them on this time. Once and for all.
Holy flip'n bejesus FLIP! Quite the collection in that stable of yours!
Most impressive good sir.
Your son's 'Stang too looks just plain sick.....
Just had to address that 1st..... moving along, as far as your stripes go, vinyl can/will last for many years, but obviously paint is
THE best way to go.
I've often (over the years) chosen vinyl 1st, and if it grows enough on me, then transition to paint myself.
The key to the vinyl is the various grades offered. Each "grade" of vinyl will offer not only a thicker mil, but also a higher grade of adhesive.
I myself tend to chose "Ultra Hi Performance" grade vinyl when it comes to vehicle use / application.
Sent from my DROID3 using Tapatalk 2
Thanks. There is more in the stable but pics were not readily available. I see the guy today on the stripes.
While out & about in meh SHO!
Quote from: 4DRHTRD on July 12, 2013, 08:55:11 AM
Quote from: geswek on July 12, 2013, 08:33:06 AM
Here's my thought;
I'm disappointed in my SHO. I was just destroyed by a 2.0L Supercharged Cobalt SS. It was enough to piss my morning off.
I really hope the turbos, meth, and 400awhp make a difference otherwise I may just say screw it and go buy a GT500 like I originally planned.
No matter how much you modify somebody will be faster, always! No matter how much money you have somebody has more, always!
I bought my Flex because I could fit in it and eventually I could make it "quick". A 12 second car rules 90% of the street but there's still 10% out there that will kick your ass. Keep going down in times and that percentage keeps going down. A GT500 give you way more power but also way less traction on the street, I've beat them at the track due to wheel spin.
Have fun with whatever you decide but just remember that a GT500 will get destroyed by a GT-R :)
Nice post 4dr and I completely agree. To be honest I've never lost to a GT500 on the street and have beat plenty of them at the track..because of traction issues. You hit the nail on the head..there's always going to be someone quicker than you
I'm heading to strip Sunday I think -- little excited to see how she handles with AWD.
Have a great time at the strip and don't forget to bring home the 12 slips! Hopefully, it won't be too hot out.
It's Cecil County Drag Strip in Maryland.
Supposed to 88F and the strip is below sea level -- not sure if that helps.
It's apparently the best strip in the 4 state area.
Heading out for a lunch date with a friend of a friends friend; aye why do I let people do this to me.
Quote from: geswek on July 13, 2013, 11:45:05 AM
Heading out for a lunch date with a friend of a friends friend; aye why do I let people do this to me.
Just saying... lunch is the express lane to the "friend zone"
Just Friends - Friend Zone (http://www.youtube.com/watch?v=RyTdSKZ8GLo#ws)
LMAO.
I'm sorry but as soon as you said lunch date it reminded me of this movie, couldn't help myself! -Chris
Quote from: Livernois Motorsports on July 13, 2013, 11:52:17 AM
I'm sorry but as soon as you said lunch date it reminded me of this movie, couldn't help myself! -Chris
It's all good! I actually like that movie LOL.
Alright, I gotta go do my day date now LMAO.
Call her and push it til tonight, play the complete thing aloof and no matter what kiss her at the end!!! Now go get em tiger!
LMAO I've never seen that movie... on the to watch list now!
Wel he hasn't responded back... He's a lost cause folks :( say a prayer
Guys like that would probably cause you a lot of headaches after the sale. You may be better off.
You have no idea.... Haha
I don't kiss and tell; but it was worth it.
We spent 3 hours talking.
Yeehaw! Geswek got some sugar!
Sugar? Nah, I don't put out that easy.
It was just a good meet; we were both pretty out of it and wasn't too thrilled about friend on friend hookup. However after a bit it was just usual, we had fun.
Good. Who knows?
Hah; let's just say -- her last words were 'I really hope to see you again.' It's been 7 years since I got divorced; my ex-wife was my only serious relationship and 3rd girlfriend. I'm pretty certain that was a good comment at the end. LOL
Oh yeah.
Dating Service Commercial (Jon Lajoie) (http://www.youtube.com/watch?v=WIM-8DT-F_k#ws)
:-[
POPOLZ, THAT WAS FUNNY!!!!!!!!!
Tip of the day: do not walk bare foot in your driveway when the sun has been hitting it since 6am...
Aww; did little man burn his feetsies?
Do you need Dave to rub cool aloe on them?
DAVE! ALOE! NOW! RUB!
I'll leave that job up to Lady Tubby Ton. I hear she has a foot fetish.
Didn't burn but my tootsies are well done
Hahah.
Quote from: PopolZ on July 14, 2013, 12:04:07 PM
Tip of the day: do not walk bare foot in your driveway when the sun has been hitting it since 6am...
Try that in AZ and see how it goes.
Sent from my mobile gizmo
Frying an egg on the sidewalk (http://www.youtube.com/watch?v=bnZQgp6srF4#)
well it ain't frying but it sure is cooking :o
Quote from: geswek on July 13, 2013, 04:39:38 PM
I don't kiss and tell; but it was worth it.
We spent 3 hours talking.
That didn't last long.
Got the infamous text message; can't meet tomorrow, maybe next week.
At least I have my SHO, she never lets me down!
Oh man. That sucks. Yeah, our SHOs are like horses to cowboys. They won't let you down and we take good care of them.
Quote from: DJE624 on July 17, 2013, 07:09:13 PM
Oh man. That sucks. Yeah, our SHOs are like horses to cowboys. They won't let you down and we take good care of them.
Yeah it was pretty ...... up.
Oh well.
:blink:
Quote from: geswek on July 17, 2013, 06:47:22 PM
Quote from: geswek on July 13, 2013, 04:39:38 PM
I don't kiss and tell; but it was worth it.
We spent 3 hours talking.
That didn't last long.
Got the infamous text message; can't meet tomorrow, maybe next week.
At least I have my SHO, she never lets me down!
Way to jinx yourself.
Sent from my SM-T210R using Tapatalk 2
Not a chance.
SHO would not leave me stranded.
If she did, I'd sell her and move on -- I don't waste my time with things.
Good Lord is it freak'n HOT out there in the suburbs of Chi-Town.
Interesting as I was paying attention to the weather forecast on the news earlier today, and the weatherman made a comment that every single State within the lower 48, had experience a 90 degree day (or higher).
Captured this a lil while ago while running some errands:
(http://i229.photobucket.com/albums/ee231/bpd1151/Miscellaneous/2013-07-19_14-55-40_889_zps473e2a09.jpg) (http://s229.photobucket.com/user/bpd1151/media/Miscellaneous/2013-07-19_14-55-40_889_zps473e2a09.jpg.html)
Certainly not very conducive to decent track times, or even any form of "spirited" driving for that matter.
Tell 'ya what, I'm not looking forward to this month's water bill either as I've barely been able to keep up with the plants, yet alone keeping the grass any semblance of being green.
Hope each of you do your best to stay cool! :pepsi:
I've been up in Delavan WI for a couple days. It's only a few degrees cooler than it is down there. My apartment will probably be 100 when I get home tomorrow. Throw on the air and go shopping.
Quote from: geswek on July 18, 2013, 07:40:59 AM
Quote from: PopolZ on July 18, 2013, 12:09:45 AM
She found out you're the Lord Tubby Ton and you're too much for her to handle.
I intimidate a lot of people.
Sent from my SCH-I545 using Tapatalk 4 Beta
I guess I called it with the "Just Friends" clip.... I TOLD YOU TO CANCEL UNTIL DINNER!!!! Oh yeah thanks for being a customer, no matter what we love you :) -Chris
Quote from: Livernois Motorsports on July 19, 2013, 05:32:04 PM
I guess I called it with the "Just Friends" clip.... I TOLD YOU TO CANCEL UNTIL DINNER!!!! Oh yeah thanks for being a customer, no matter what we love you :) -Chris
HAhaHAHAHAHahaHAha---wheres mah freaking ball cap? ;)
Yeah Yeah.
Quote from: geswek on July 19, 2013, 05:33:28 PM
Quote from: Livernois Motorsports on July 19, 2013, 05:32:04 PM
I guess I called it with the "Just Friends" clip.... I TOLD YOU TO CANCEL UNTIL DINNER!!!! Oh yeah thanks for being a customer, no matter what we love you :) -Chris
HAhaHAHAHAHahaHAha---wheres mah freaking ball cap? ;)
Yeah Yeah.
Did you buy one.... -Chris
Quote from: Livernois Motorsports on July 19, 2013, 05:36:48 PM
Quote from: geswek on July 19, 2013, 05:33:28 PM
Quote from: Livernois Motorsports on July 19, 2013, 05:32:04 PM
I guess I called it with the "Just Friends" clip.... I TOLD YOU TO CANCEL UNTIL DINNER!!!! Oh yeah thanks for being a customer, no matter what we love you :) -Chris
HAhaHAHAHAHahaHAha---wheres mah freaking ball cap? ;)
Yeah Yeah.
Did you buy one.... -Chris
No, it was more like pay back for calling it -- you know the "customer" is always right.
BHAHAHAHA
Well obviously he wasn't right this time.... :bangin: hahaha
If I gave away hats every time a customer had a failed date, we would def be out of business!!! -Chris
Quote from: Livernois Motorsports on July 19, 2013, 05:40:11 PM
Well obviously he wasn't right this time.... :bangin: hahaha
If I gave away hats every time a customer had a failed date, we would def be out of business!!! -Chris
LMAO, we can't have that! I mean, who else is going to make my SHO haul my SHObigREAR around?
I need to order a hat anyways--you got them in stock yes? I'll venture by the store tomorrow so I can retire my old Alpine Stars ball cap since I don't race motorpeds anymore.
Yes sir we do have them in stock.
http://www.livernoismotorsports.com/products/Livernois-Motorsports-Baseball-Cap.html (http://www.livernoismotorsports.com/products/Livernois-Motorsports-Baseball-Cap.html)
Look on the bright side. The hat will never say no to you... :rofl:
The hat is your friend.
Quote from: DJE624 on July 19, 2013, 05:49:15 PM
The hat is your friend.
Love your hat, and your hat will love you
I love good hats though!
Is this a bandless hat? I hate the ones with the 1947 snap latch crap.
FlexFit hat sir! Nice and comfy
What exactly is "SHO CLONE" about it?
I don't see a damn thing; sure don't look like my 2013 SHO LOL.
That's why I deleted it already. You caught it too fast. I thought it would be cool that somebody was trying to clone a SHO but you are right. Nothing SHO about it.
I'm like that man; BATMAN!
Now I'm shopping freaking LED's -- wanting to replace my interior lights and license plate lights.
You better be ready for September Ride of the Month!
NAH, I don't care about that crap.
I can't compete with Mike -- he pretty much owns it as the top SHO here.
Quote from: geswek on July 19, 2013, 10:07:30 PM
I'm like that man; BATMAN!
Now I'm shopping freaking LED's -- wanting to replace my interior lights and license plate lights.
The LED's in the interior are awesome...but don't forget to do the vanity lights in the mirrors on the sun visors. Oh, and also LED's in the puddle lights.
I have to stop racing the damn mosquito's!
I can't seem to keep my foot off the pedal at lights, random, stop signs, powersliding around corners, etc.
The car is too damn much fun! I found out with the PP and disabling advancetrac; I can now successfully drift her around corners. I need someone to record me doing it now LOL.
We'll be looking forward to seeing Mr. Block.
GAH.
I used to smoke -- finally kicked the habit in February 2013 after getting Pneumonia.
As a result -- I have some pretty ugly teeth; I hardly smile because of it.
I decided to give these Crest 3D White Intensive Professional Effects a try. It's basically 7 days for 2 hours a day -- cost me $65 bucks for box.
OMG it sucks; I'm doing the first one and few things -- I can't stop spitting and I got 1-1/2 hours left. The stupid things don't cover my whole mouth; just front portion.
I think I may just go to dentist and pay the $500 bucks for the whole mouth tray deal where they impression your entire mouth and then give you the peroxide based (basically what I'm using now).
LETS see what happen; just wish I'd stop spitting; ugh
They don't sound like much fun...good luck with them, hope you are pleased with the results.
It's starting to grow on me now -- after first hour it's not that bad.
I think I will see a dentist though because I rather have a full face bleaching than just my front portion you see when smiling.
Lesson; don't f...... smoke LOL -- if you do, brush like 5 times day because apparently the "two per day" don't do jack squat! At least it didn't for me.
Quote from: DJE624 on July 19, 2013, 05:49:15 PM
The hat is your friend.
Man, you got friend zoned by a hat.
29hrs of work in 2 days... I need my pillow!!!
Very frustrated and ticked off. I got my Oval overlays and steering wheel emblem today. Although the oval overlays looked real good, I can not use them. The raised Ford lettering shows through too strongly. So scratch that idea. I guess the only way to get them right is like what Mike did. Take them apart and have them painted. No money for that right now. So, it's Blue Ovals for now. The steering wheel emblem, sized to fit the whole indent doesn't look as good as the smaller one with the silver ring showing. That one showed the blue on the vertical lip of the factory emblem around the edge. Now, I might not be able to go back to stock because I think the Ford was printed on. I didn't look close enough but it looks like I might have pulled some of it off with the old emblem overlay. And, there still might be the slightest hint of blue around the edge. I'm going to go back out later and take a real good look at it. If I can clean it up, I just might leave it stock for now.
Quote from: DJE624 on July 22, 2013, 06:37:37 PM
Very frustrated and ticked off. I got my Oval overlays and steering wheel emblem today. Although the oval overlays looked real good, I can not use them. The raised Ford lettering shows through too strongly. So scratch that idea. I guess the only way to get them right is like what Mike did. Take them apart and have them painted. No money for that right now. So, it's Blue Ovals for now. The steering wheel emblem, sized to fit the whole indent doesn't look as good as the smaller one with the silver ring showing. That one showed the blue on the vertical lip of the factory emblem around the edge. Now, I might not be able to go back to stock because I think the Ford was printed on. I didn't look close enough but it looks like I might have pulled some of it off with the old emblem overlay. And, there still might be the slightest hint of blue around the edge. I'm going to go back out later and take a real good look at it. If I can clean it up, I just might leave it stock for now.
Too bad ......sometimes projects turn out to be a lot tougher than they should be.
Alright! Got the steering wheel emblem overlay off and cleaned up the adhesive. Looks like new. Waxed the front emblem from trying out the overlay. Check. The only thing not stock from factory on the exterior is the hub overlays. They look great. No mods to the interior other than my IPASS. Clean slate.
You know what it's like to have your teeth hurt -- by light, air, breathing, cold, hot. I'm not talking about a tooth ache! I'm talking about straight bleach/peroxide gel soaking that is what they call "Teeth Whitening".
It's not so much fun, but damn if it ain't worth it! I'm on day 3 and I already see a HUGE difference -- coming from guy who smoked like freight train and had yellow teeth.
Geswek - sorry to hear your teeth hurt, but its encouraging that you like the whitening.
My teeth have hurt ever since 7th grade when I got braces. That experience has made me an anti-dentite for sure! That first orthodontist really was a sadist - he would ask if my teeth hurt after the monthly tightening, and when I would say yes (he saw me white knuckling the chair)... He would always say "good." I now use toothpaste with a sensitivity ingredient- it helps, and I do notice my teeth hurt if I miss a brushing. Maybe something like that could help you through the process?
DJE: I'm glad to hear your wheel is looking great, but also sorry to hear of the decal issues. I wonder how much it would cost to hire a college art student to paint the emblem and sneek it into the kiln at school? Just a thought, and prolly way off, since I have no idea what kind of paint or process is needed.
I think I might just pony up and buy a new one for my SHO, since I haven't heard of any new emblems having the same problems.
Quote from: tdmsu on July 22, 2013, 08:39:02 PM
Geswek - sorry to hear your teeth hurt, but its encouraging that you like the whitening.
My teeth have hurt ever since 7th grade when I got braces. That experience has made me an anti-dentite for sure! That first orthodontist really was a sadist - he would ask if my teeth hurt after the monthly tightening, and when I would say yes (he saw me white knuckling the chair)... He would always say "good." I now use toothpaste with a sensitivity ingredient- it helps, and I do notice my teeth hurt if I miss a brushing. Maybe something like that could help you through the process?
OOH; I don't think they hurt THAT bad--but its enough to feel it.
Though it's worth it in the end my friend. To have pearly whites staring at me in mirror makes me happy.
My dome maker guy and I are thinking of maybe popping the emblem off and making a dome that will work now. I'll have to take a look at that.
got home and the propane tank on the bbq is gone... if my roommate didn't remove it well. WHO THE F**K STEALS A GAWD DAMN PROPANE TANK!?!?!??!
Quote from: PopolZ on July 23, 2013, 07:30:48 AM
got home and the propane tank on the bbq is gone... if my roommate didn't remove it well. WHO THE F**K STEALS A GAWD DAMN PROPANE TANK!?!?!??!
That made me laugh out loud.
Sent from my SCH-I545 using Tapatalk 4 Beta
Just ordered a security camera.
Quote from: PopolZ on July 23, 2013, 07:30:48 AM
got home and the propane tank on the bbq is gone... if my roommate didn't remove it well. WHO THE F**K STEALS A GAWD DAMN PROPANE TANK!?!?!??!
The same kind that took my front spoiler, lower front body molding, and the plastic under piece right in front of the spoiler!
WOW.
I bought my car 05/07/13 and I have 4k miles on it already.
I DRIVE A lot.
I may need a second car LOL.
filled up my car last night... I wont be able to walk straight for a week. 107.06$ to fill it up with 94octane.
Quote from: geswek on July 23, 2013, 03:23:32 PM
WOW.
I bought my car 05/07/13 and I have 4k miles on it already.
I DRIVE A lot.
I may need a second car LOL.
Bought my car in december and now have 14-15k miles.
Quote from: adelsin on July 24, 2013, 11:28:46 AM
Quote from: geswek on July 23, 2013, 03:23:32 PM
WOW.
I bought my car 05/07/13 and I have 4k miles on it already.
I DRIVE A lot.
I may need a second car LOL.
Bought my car in december and now have 14-15k miles.
NICE.
I'm about to make a trip to Austin; like 4k round trip. I'm excited--going to take the black beast to the fams and show off some real power. BHaha
:biggrin: :biggrin: :biggrin:
Quote from: geswek on July 24, 2013, 11:30:00 AM
Quote from: adelsin on July 24, 2013, 11:28:46 AM
Quote from: geswek on July 23, 2013, 03:23:32 PM
WOW.
I bought my car 05/07/13 and I have 4k miles on it already.
I DRIVE A lot.
I may need a second car LOL.
Bought my car in december and now have 14-15k miles.
NICE.
I'm about to make a trip to Austin; like 4k round trip. I'm excited--going to take the black beast to the fams and show off some real power. BHaha
:biggrin: :biggrin: :biggrin:
Be prepared for a power loss when you hit that 90 - 91 octane. Texas has weird octane.
Quote from: adelsin on July 24, 2013, 11:33:19 AM
Be prepared for a power loss when you hit that 90 - 91 octane. Texas has weird octane.
Yeah, I'm not looking forward to that.
I am thinking about switching to 91 turn when I leave just in case I run into stations on the trip that doesn't carry 93.
Recently did a Ohio to AZ trip - You are fine until after Missouri. Oklahoma is where the madness begins.
Quote from: adelsin on July 24, 2013, 11:38:08 AM
Recently did a Ohio to AZ trip - You are fine until after Missouri. Oklahoma is where the madness begins.
Thanks for the heads up!
I'll keep that in mind.
How was your MPG? I ran numbers and I'm expecting about a $600 round trip fuel bill based on average prices and moderate MPG. I don't expect much over 20mpg during the trip.
Quote from: geswek on July 24, 2013, 11:39:16 AM
How was your MPG? I ran numbers and I'm expecting about a $600 round trip fuel bill based on average prices and moderate MPG. I don't expect much over 20mpg during the trip.
No tune mind you - 26 MPG until Missouri... 24 in Missouri (too damn hilly)
22.5 overall from Ohio to Southern AZ, Missouri and New Mexico destroyed the mpg.
Quote from: PopolZ on July 24, 2013, 11:25:05 AM
filled up my car last night... I wont be able to walk straight for a week. 107.06$ to fill it up with 94octane.
I filled up at 1.539$/L at Petro-Canada 6 days ago. Yep, it hurts... (5.83 $/gal)
Quote from: BigPelo on July 24, 2013, 12:16:28 PM
I filled up at 1.539$/L at Petro-Canada 6 days ago. Yep, it hurts... (5.83 $/gal)
1.599$ last night
Ouch! $4.19 per gal. here. With my grocery points, $3.99.
some people say that cucumbers taste better pickled...
Quote from: SoCalSHO on July 25, 2013, 05:53:25 PM
Sorry, pictures, or it didn't happen. ;)
I didn't have my phone on me; I was lugging car parts into the apartment.
She was pretty hot, but clearly a tramp! It was odd seeing her here because most of the folks that live here are not that kind.
Good luck DJ
Quote from: geswek on July 25, 2013, 07:46:28 PM
Quote from: SoCalSHO on July 25, 2013, 05:53:25 PM
Sorry, pictures, or it didn't happen. ;)
I didn't have my phone on me; I was lugging car parts into the apartment.
She was pretty hot, but clearly a tramp! It was odd seeing her here because most of the folks that live here are not that kind.
Whats that kind?
Sent from my GT-I9100 using Tapatalk 2
Quote from: adelsin on July 25, 2013, 09:14:25 PMWhats that kind?
Sent from my GT-I9100 using Tapatalk 2
You know, that kind!
I entered my photo from the Coal Breaker into a contest.
Some cash and a Leica V-LUX 40.
http://i-shot-it.com/competition.php?id=51d856bd1872b (http://i-shot-it.com/competition.php?id=51d856bd1872b)
Good luck!
I was tired this morning, crashed in my bed it wasn't even 8am, woke up at 10pm.
Now I'm sitting at work in a vegetative state.
Come on 7am!!!
LOL I may be working third pretty soon.
Good luck if you work 3rd shift Dave...I did it for the last 4 1/2 years before I retired...it took me 2 years to get some kind of schedule worked out that worked for me. Only down side is that most of the world is a day shift world.
Been working nights myself (by choice) for almost 19 years.....
You kind of, and I'll stress kind of, get used to it eventually.
Sent from my DROID3 using Tapatalk 2
I used to work 2nd at the Resort. Weds thru Sun. It was the most brutal shift.
I prefer working nights because the traffic is always in the other direction, it's more quiet in the office, no boss and the parking is cheaper.
As much as I liked working morning watch (2200-0645 until we went to 12 hour shifts (1900-0700 hrs), and I worked it for 20 years, now that I work a regular day shift, I love it. I have no tolerance for drunks now. But i liked none of the upper echelon around.
Last payment on the '10 last month. Just got the clear title from the bank. Feels real good!
Congrats, Larry! Hope the car stays troublefree a long, long time!
Looks great, runs great, total pleasure to drive. Best car I've ever owned by a long shot.
^ I agree with above statement!
Woo-hoo!
(http://img.tapatalk.com/d/13/07/29/napemyna.jpg)
Sent from my SCH-I545 using Tapatalk 4 Beta
I liked it.
Quote from: geswek on July 29, 2013, 10:37:41 AM
Woo-hoo!
(http://img.tapatalk.com/d/13/07/29/napemyna.jpg)
Sent from my SCH-I545 using Tapatalk 4 Beta
Mine was Taurus of the Day on Ford Taurus page on Facebook on July 2nd LOL
Random thoughts....you wanna know what my problem is!
Badass Mustard Rap (http://www.youtube.com/watch?v=CoqeGxVqnY4#ws)
Oh my random thought for the day...I had to drop the SHO off yesterday evening at the dealership to get looked at for a CEL and the fuel tank acting wonky (they are related I believe), So I took the Mustang into work today...and as I'm driving down the 4 lane "highway" into work, I see a Ruby Red 2013 SHO driving the opposite direction...it was the alternate me driving in the other direction ;)
Quote from: SHOdded on July 29, 2013, 06:33:31 AM
Congrats, Larry! Hope the car stays troublefree a long, long time!
Same here Larry!
Quote from: Scott13SHO on July 29, 2013, 03:27:23 PM
Oh my random thought for the day...I had to drop the SHO off yesterday evening at the dealership to get looked at for a CEL and the fuel tank acting wonky (they are related I believe), So I took the Mustang into work today...and as I'm driving down the 4 lane "highway" into work, I see a Ruby Red 2013 SHO driving the opposite direction...it was the alternate me driving in the other direction ;)
Maybe they took your car out to test drive, or the mechanic took it home for an extended test drive.
The extended test drive would have been 30-40 miles and this happened before the dealership would have been open. There is another SHO near me with the same options I see everyonce in a while. Just odd/weird I saw it today.
Sent from my iPhone using Tapatalk
Do you guys wave at each other when you pass like people in Jeeps/on motorcycles. (gay) :D
Sorry RedRocket but your screen name reminds me of an episode of South Park :-[ ;D
Thats the whole point PopolZ...
I guess that makes my Pontiac the Brown Bomber!
I just filled the car up;
93 octane from Sunoco on LMS 93 tune
349 miles on trip-o-meter
15.969 gallons put in
21.85 miles per gallon
That's pretty damn impressive!
OH
My new t-handle shifter shows up tomorrow. I ordered it from a 2012 Taurus Limited I think.
Let's see if it works LOL.
I think it will. Good luck with it!
I Just Talked To My Parts Guy, He Said It woulDnt Work On Your Car, But Just Yours :o
Jk Hope It Works Out Good For you.
Oh yeah, try not to break it.
How do you take dang thing off? Don't I have to like pry boot down to expose the screw?
Sent from a mobile, I think.
That's the way I've done them before. That chrome ring should slide down.
wonder if a t handle would fit a Flex ?
You can at least check the parts diagrams here and see if there is a chance. Compare yours to a '12 Taurus SHO or Limited.
http://weluvfordparts.com/ (http://weluvfordparts.com/)
Our friendly vendor-Fred B.
My concern for all the handle swaps is if you may also have to change the boot.
Mustang destroys built Porsche on the street (Mustang in car) (http://www.youtube.com/watch?v=4m-7efuVjJg#ws)
And we have ... liftoff! Holy guacamole!
I've been contemplating buying a 2013 Speed 3 for commuter sharing with the SHO.
I just feel the need to type something because I'm cool...
Quote from: geswek on August 01, 2013, 03:25:39 PM
I've been contemplating buying a 2013 Speed 3 for commuter sharing with the SHO.
Why not an ST? Then again I wasn't a big fan of the ST3 seats...the Recardos are a bit too restrictive around my kidney area.
Quote from: Needmoreboost on August 01, 2013, 04:16:35 PM
I just feel the need to type something because I'm cool...
You are cool; I hail you "LORD COOLNESS DUDE"
Quote from: Scott13SHO on August 01, 2013, 04:18:13 PMWhy not an ST? Then again I wasn't a big fan of the ST3 seats...the Recardos are a bit too restrictive around my kidney area.
Yeah, me either. I didn't like the bolster in the thigh area--
I found one in VA for $17k with 12k miles.
Quote from: geswek on August 01, 2013, 04:24:03 PM
Quote from: Needmoreboost on August 01, 2013, 04:16:35 PM
I just feel the need to type something because I'm cool...
You are cool; I hail you "LORD COOLNESS DUDE"
Quote from: Scott13SHO on August 01, 2013, 04:18:13 PMWhy not an ST? Then again I wasn't a big fan of the ST3 seats...the Recardos are a bit too restrictive around my kidney area.
Yeah, me either. I didn't like the bolster in the thigh area--
I found one in VA for $17k with 12k miles.
Do some research on the speed 3's. I looked at those before I bought my SRT4 Caliber. They have a tendency to pop motors stock or modded. Personally knew a few guys. FYI
Quote from: geswek on August 01, 2013, 03:25:39 PM
I've been contemplating buying a 2013 Speed 3 for commuter sharing with the SHO.
I have a 2009 I would sell ya cheep haha
Quote from: Needmoreboost on August 01, 2013, 04:35:25 PM
Quote from: geswek on August 01, 2013, 04:24:03 PM
Quote from: Needmoreboost on August 01, 2013, 04:16:35 PM
I just feel the need to type something because I'm cool...
You are cool; I hail you "LORD COOLNESS DUDE"
Quote from: Scott13SHO on August 01, 2013, 04:18:13 PMWhy not an ST? Then again I wasn't a big fan of the ST3 seats...the Recardos are a bit too restrictive around my kidney area.
Yeah, me either. I didn't like the bolster in the thigh area--
I found one in VA for $17k with 12k miles.
Do some research on the speed 3's. I looked at those before I bought my SRT4 Caliber. They have a tendency to pop motors stock or modded. Personally knew a few guys. FYI
That was in the old models something In the factory tune they revised in new models, having an acces port and running an off the shelf map also fixed
(http://i1059.photobucket.com/albums/t440/DJE624/ecoboost1_zps33594343.jpg)
(http://i1059.photobucket.com/albums/t440/DJE624/ecoboost-f-150-graph_zps2946ee0f.jpg)
Quote from: DJE624 on August 02, 2013, 08:47:39 PM
(http://i1059.photobucket.com/albums/t440/DJE624/ecoboost1_zps33594343.jpg)
Man I wish this pic was bigger!
So do I man! I already made it bigger. I thought anymore, it would blur too much.
Heahah
I got invited to some car show tomorrow--mostly imports. I'm gonna go since I have nothing better to do and support my mate.
I was just thinking about this--outside car looks great, engine bay; f**king mess. Gah, I'm not cleaning her tomorrow. No hood popping for this guy.
Quote from: geswek on August 02, 2013, 10:47:42 PM
I was just thinking about this--outside car looks great, engine bay; f**king mess. not
If you want an easy way to get the engine bay looking good, Adam's In and Out Spray works great. Just spray it on and you can use it on vinyl, rubber, and plastic, both interior, exterior, and engine bay. The other thing I use that works great is Aerospace 303 Protectant. But the In & Out Spray is really easy, spray it on and then allow it to dray for a few minutes, quick buff, and things look great.
Quote from: mjhpadi on August 02, 2013, 11:45:32 PM
If you want an easy way to get the engine bay looking good, Adam's In and Out Spray works great. Just spray it on and you can use it on vinyl, rubber, and plastic, both interior, exterior, and engine bay. The other thing I use that works great is Aerospace 303 Protectant. But the In & Out Spray is really easy, spray it on and then allow it to dray for a few minutes, quick buff, and things look great.
Doesn't help me when it can't be bought locally.
:bangin:
I'm gonna call Franklin Auto Spa at 8, see if they can have one of their minions do my engine bay--it needs to be cleaned anyways.
I just don't like leaving my hood open while walking around looks at cars; too many dumb turds in the world.
Just like I don't leave my windows down either. They'll just have to stare through my 15% tint LOL.
Next week about mid week I should get my Shelby back from having new stripes painted on. No more stickers crap.. Was the third set from Shelby and all weathered terribly. Ill post some pics.
Stopped by during the week and saw at least the front bumper and looked good so far. Cannot wait. You know how after ya wash your car... it always drives better.. Lol.
That's the orange one, right?
Yup
Quote from: Needmoreboost on August 01, 2013, 04:35:25 PM
Quote from: geswek on August 01, 2013, 04:24:03 PM
Quote from: Needmoreboost on August 01, 2013, 04:16:35 PM
I just feel the need to type something because I'm cool...
You are cool; I hail you "LORD COOLNESS DUDE"
Quote from: Scott13SHO on August 01, 2013, 04:18:13 PMWhy not an ST? Then again I wasn't a big fan of the ST3 seats...the Recardos are a bit too restrictive around my kidney area.
Yeah, me either. I didn't like the bolster in the thigh area--
I found one in VA for $17k with 12k miles.
Do some research on the speed 3's. I looked at those before I bought my SRT4 Caliber. They have a tendency to pop motors stock or modded. Personally knew a few guys. FYI
I had a 2010 Speed3......loved it. Never had 1 single problem with it. I installed a Corksport SRI and TIP and it was a little rocket. Best handling car I ever owned. I only got about 25 MPG and that was keeping my foot out of the skinny pedal too.
Stopped at a rest area on the way home from Detroit last night. I never carry cash anymore. But, I checked out the machines. I saw what appeared to be the edge of a bill sticking out of one. I got my fingernail on it and pulled out a mangled five! Free pop and chips!
Quote from: DJE624 on August 06, 2013, 01:24:55 PM
Stopped at a rest area on the way home from Detroit last night. I never carry cash anymore. But, I checked out the machines. I saw what appeared to be the edge of a bill sticking out of one. I got my fingernail on it and pulled out a mangled five! Free pop and chips!
I find this concerning.
Things are slow @ work today.
Have a died in the wool GM fan @ work who is looking to get a 2014. Likes my SHO but it's a Ford! Looked what he showed me:
2014 Cadillac XTS Packs Twin Turbo Power new V-6 engine option produces 410 horsepower
Starting in August, the all-new Cadillac Twin Turbo V6 will go into production as an optional engine for the 2014 XTS.
The new Cadillac Twin Turbo V6 is also a signature feature of the upcoming all-new 2014 CTS luxury performance sedan. In the XTS, the twin turbo will produce an SAE-certified 410 horsepower (306 kW) and 369 lb-ft of torque (500 Nm), making it one of the most power-dense six-cylinder engines among luxury cars. The engine delivers 105 lb-ft more torque over the standard V-6 from1900 to 5600 rpm, providing seemingly endless torque for vehicle responsiveness.
"The addition of the new Cadillac Twin Turbo expands and elevates the XTS luxury sedan," said Bob Ferguson, vice president Global Cadillac. "This is a compelling enhancement to what is already one of the most technically advanced sedans in our history."
In both the CTS and XTS product lines, the twin turbo will be the centerpiece of a new model offering called Vsport. The new Vsport is inspired by and slotted "underneath" Cadillac's elite high-performance V-Series models. Vsport includes the best-performing technical elements inside the "regular" car line in a single model, headlined by Twin Turbo engine.
The new Cadillac Twin Turbo is a comprehensive upgrade to the 3.6L dual overhead cam V6 that is standard in the XTS in the U.S. market.
The XTS Vsport model will be offered only in the up-level Premium and Platinum Collections as all-wheel drive.
I looked at him & said WOW that GM is really got a winner there, too bad they had to copy a 4 year Ford design to get it & stay away from that Guzzler Tax on their V-8 & can't wait to see sticker price. Maybe you should look at the Chevy SS. 415HP out of a 6.2L V8 WOwzzy!
Since you aren't going to talk him into a Ford...it tells you that he is somewhat closed minded. To bad, sometimes you can't see the forest for the trees...it's kinda like saying the only old muscle cars you like are Camaro's, 'Vette;s....who doesn't like them all. Sometimes you just have to admit there are a lot of good cars out there. I'm betting the Cadillac will come in at least 5G's higher then an equally equipped MKS. That's the car he should be comparing the Cadillac with, not the SHO. And I think the MKS is a lot better looking the Cadillac series, for some reason, I just can't warm up to them...but that's just me.
I love this converter.
http://www.mk5cortinaestate.co.uk/calculator4.php (http://www.mk5cortinaestate.co.uk/calculator4.php)
It says I have 447HP at the crank! That might be English HP though.
Quote from: geswek on August 05, 2013, 04:21:09 PM
Thanks Bruce!
Dyno is scheduled for Monday at 4:30; eager to see what the car does.
$80 bucks for 3 pulls; not bad.
$65 here in Atlanta.
Quote from: DJE624 on August 07, 2013, 10:23:53 PM
I love this converter.
http://www.mk5cortinaestate.co.uk/calculator4.php (http://www.mk5cortinaestate.co.uk/calculator4.php)
It says I have 447HP at the crank! That might be English HP though.
440hp is good # for a stage4+ tune!!!!!!
Considering the car is 365bhp; and most coming off dyno are around 277whp -- it wouldn't be so far off.
I guess without a crank dyno you'd never know "for sure."
Either way; the car hauls ass mate!
You bet! Thanks! I hope this will come in handy for you Monday!
Being that the 4+ is a max 93 tune a plus 80 at the crank is reasonable. Yeah, for such heavy pig cars they rip. Wonder what a 1000 pound diet would do for one of these cars. Low 11's with slicks and tune! Lol
Heres my prediction for Geswek. 354/404. Winner gets autographed pic of the Man himself. Lol
I was thinking 350/400 with the Corsa.
Has anyone dyno'd a '13 with a tune yet?
I'm cleaning walls and ceilings caked with what appears to be 15 years of chain smoking nicotine. I've cleaned the walls 5 times now and if I spray some cleaning solution on them I can still see nicotine streaks... it's driving me fu***g nuts!
Can steam be safely applied to these walls/ceilings? That may take care of the stubborn remnants.
Can you repaint? That would be the easiest way of taking care of it.
Sent from my Nexus 7 using Tapatalk 4
I'm prepping the walls/ceilings for repaint.
I did try some steam but it wasn't doing it... maybe my steamer isn't hot enough.
When I moved into my condo almost 10 years ago, I went through something like 17 gallons of white paint repainting the walls and ceiling. Keep in mind it was only 976 sq foot or so. The previous owner rented it out to an old lady that smoked like a chimney.
Sent from my Nexus 7 using Tapatalk 4
already went through 16 gallons...
Yikes...good luck!
Sent from my Nexus 7 using Tapatalk 4
Quote from: DJE624 on August 07, 2013, 11:18:57 PM
I was thinking 350/400 with the Corsa.
Has anyone dyno'd a '13 with a tune yet?
Yep, I had 355. Can't remember the torque exactly but over 400.
Quote from: Darkside on August 11, 2013, 01:07:20 AM
Quote from: DJE624 on August 07, 2013, 11:18:57 PM
I was thinking 350/400 with the Corsa.
Has anyone dyno'd a '13 with a tune yet?
Yep, I had 355. Can't remember the torque exactly but over 400.
Did you have the downpipes then?
Quote from: PopolZ on August 09, 2013, 04:39:24 PM
I'm cleaning walls and ceilings caked with what appears to be 15 years of chain smoking nicotine. I've cleaned the walls 5 times now and if I spray some cleaning solution on them I can still see nicotine streaks... it's driving me fu***g nuts!
One word Kilz. just primer and paint.
Quote from: crash712us on August 11, 2013, 10:17:40 AM
Quote from: PopolZ on August 09, 2013, 04:39:24 PM
I'm cleaning walls and ceilings caked with what appears to be 15 years of chain smoking nicotine. I've cleaned the walls 5 times now and if I spray some cleaning solution on them I can still see nicotine streaks... it's driving me fu***g nuts!
One word Kilz. just primer and paint.
I've used that several times and it works great, really cuts out stuff bleeding through the paint.
I filled my cheap steamer with almost boiling water and it was hot enough to clean the nicotine. I've ordered something bigger and better so I should be able to use normal primer when I'm done with the cleaning.
Quote from: SHOdded on August 09, 2013, 04:49:59 PM
Can steam be safely applied to these walls/ceilings? That may take care of the stubborn remnants.
Got my steam cleaner yesterday and put it through its pace tonight... WOW! No headache from chemical fumes and it's a lot easier to clean. I have to be careful though because it's stripping the paint LOL
What did you go with?
Wagner 915, not expensive but it does have good reviews.
I had to refill it 3 times to redo the walls and do the ceiling.
I just received a text msg from my friend. I need to share it with you:
(http://i1090.photobucket.com/albums/i380/bigpelo/null_zps03431411.jpg) (http://s1090.photobucket.com/user/bigpelo/media/null_zps03431411.jpg.html)
Your first and last name... WOW!!! Unbelievable!!!! You are one lucky dude.....
Waah?
Geswek, I screwed up.... it was his wife's name.... LOL
Great Picture though...
26 Guests right now. Come on guys, join up! I promise it won't hurt.
LOL I don't think I could fit 26 guests in here.
Only saw 1 friggin Sho up at Woodward on Friday night.
Welcome to my life -- no SHO's ever show up here.
Few that I know of around here; I trump them in sexy-ness.
:biggrin:
I have lived in Mobile Alabama for 2 years now and I have only passed one SHO while going down the interstate :(
I just moved to nc from biloxi crash... lived there my whole life. I only saw two SHOs before I moved late june. One random blk one on i10 headed home from school (usa) and one came thru valet at the golden nugget. That's it.
I've only been here 6 weeks and already know of 3 other sho's... two blk 10-12 cars and one charcoal looking 2013. One of the early cars has a Mobsteel.
Haven't caught up with any of em to conversate yet tho... hoping they'll be at the all Ford show next weekend.
Yeah and there aren't any Ford shows here either! Blah :bangin:
Heading back up to WI tomorrow.
Quote from: crashnburn on August 18, 2013, 07:59:53 PM
Yeah and there aren't any Ford shows here either! Blah :bangin:
Yea cruise ins were prevalent before katrina but have since died it seems. Couldn't believe it when I saw a commercial for an all Ford show hosted by a big ford dealer in Winston-salem
I got pulled over again today for window tint; apparently they think I'm undercover and when they run my plate it doesn't come back to a department.
UGH.
(2) $112 tickets within 2 weeks.
Quote from: SHODYOU on August 18, 2013, 08:40:02 PM
Yea cruise ins were prevalent before katrina but have since died it seems. Couldn't believe it when I saw a commercial for an all Ford show hosted by a big ford dealer in Winston-salem
I know there is a Cars and Coffee weekly http://charlotte.carsandcoffee.info/ (http://charlotte.carsandcoffee.info/) in Charlotte, NC.
Like Scott pic of the SHO police car above, St Louis County which is huge is switching to white SHO's. The first time I pulled up besides one at a stop light & the nice police officer, too many on this forum to say anything else, looked up from his computer & smiled & gave me a thumbs up. Ok that's cool. But seen another one yesterday, but today the ultimate downer, had to follow one into my subdivision. I like feeling safe with police in my area. But I had the only white SHO all to myself for almost 4 years in St. Lou, I feel like the song some of you maybe to young to remember, MY MEMORY JUST BEEN SOLD MY ANGEL IS NOW A CENTERFOLD. I'm official bummed out!!!!!!!!!!!
Already 1 week and a half of vacation done... only one week left :(
I wanted to work on my GTR but I'm still working on the house and to top it off, I have some kind of stomach bug :(
Is that a part of French Quebecistan?
Get better soon, PopolZ! And stay away from peeling lead paint.
Quote from: EcoBrick Bob on September 09, 2013, 05:09:45 PM
Is that a part of French Quebecistan?
it is!
Quote from: SHOdded on September 09, 2013, 05:14:29 PM
Get better soon, PopolZ! And stay away from peeling lead paint.
Thanks! And I'm near the end of the painting!!! I have to pickup gallon no 22 tomorrow and I'll be done by the end of the day.
(http://2.bp.blogspot.com/-dPjyz8DLnW8/TqJWnXCA_DI/AAAAAAAABEw/Wf9sGeRXN_8/s400/1shim3.jpg)
Anyone every think of shimming the hood to help keep the temps down In the engine bay ?
you should watch Roadkill on youtube... No hood is better! :D
Quote from: jomc111 on September 10, 2013, 07:45:09 PM
(http://2.bp.blogspot.com/-dPjyz8DLnW8/TqJWnXCA_DI/AAAAAAAABEw/Wf9sGeRXN_8/s400/1shim3.jpg)
Anyone every think of shimming the hood to help keep the temps down In the engine bay ?
Just when I thought I'd left the ricer world.
Guess whos back, back again
Boost is back, tell a friend
Guess who's back, guess who's back,
guess who's back
Boost? ;D :beer: :biggrin:
Got any vids, Mike?
Not yet, I was just doing 40-60 pulls in 3rd and watching AFR. The car aux fuel system is either putting the car at 9.8-9.9 AFR and no problems or 10.8-11.2 and sometimes the car feels like it's going lean so it closes throttle. I am so glad this car is smart because it should have blown up many times by now. The good thing is I have boost and I can tune the fuel luckily with the aux fueling controller. Long term I'm probably going to look at a more sophisticated controller but that costs more $$ so we'll see. I need to stop by Pro-EFI who is in town here and see if they'll help out :)
My random thought of the day;
To thank 4DRHTRD for all his work he has done to advance the platform, EVEN before he started this forum. I seen him posting on other forums, seeking advice or seeing what everyone else has done and there results.
I researched this vehicle for over a year, and seeing him advance the platform made it so much easier. THANKS AGAIN for your all the money, and time you have put into this. Tell your wife thanks as well, i am sure she thought you were crazy for pulling apart a brand new 40k car.
EDIT; What did your wife say to all of this? i assumed this was your primary car, and your family car?
Thank you very much!
Sent from my HTC6435LVW using Tapatalk 4
Mike's got more vehicles to drive then he knows what to do with. Plus he works from home, so blowing up his car and not getting to work isn't really a concern.... :))
Sent from my mobile gizmo
Quote from: FaSSt9602 on September 13, 2013, 04:22:17 PM
Mike's got more vehicles to drive then he knows what to do with. Plus he works from home, so blowing up his car and not getting to work isn't really a concern.... :))
Sent from my mobile gizmo
It all makes sense now...
But I should add that technically the Flex is his "primary" car... :beer: :bangin:
I have my Flex, wife has her truck and I have a beater for the kids. When the flex is down I drive the kids car . Not that many cars...
Sent from my HTC6435LVW using Tapatalk 4
Glad to be back in rural Wisconsin! I still have to make a couple of trips back to the slums of suburban Chicago before the end of the month. The only bad thing is that I'll probably have to detune down to 91 octane. But, it will be worth it.
I sailed (Raced a C scow) on Lake Delavan when in College. Later raced MC's here in IA, and bought from Melges in Zenda.
LOL Buddy Melges!
I wish i had like 2,000 in cash to spend on the flex. I would get a tune, and lighter wheels to start.
Very happy! I found a Speedway not to far away that has 93 Octane! Yeehaw!
Our male to female member ratio is 115 to 1. That means we are just shy of 4 ladies here.
It's a sausage fest!
I just got done working out and puking up dinner -- been long time since I felt that.
Quote from: geswek on July 23, 2013, 03:23:32 PM
WOW.
I bought my car 05/07/13 and I have 4k miles on it already.
I DRIVE A lot.
I may need a second car LOL.
I've got you beat.. 18k since march
bought my car May 4th 2012 and I have 8802miles done since...
you all drive to much i dive my car about 5,000 miles a year, now my work truck is a different story thats closer to 80,000
I just saw that Land Rover commercial again and I'm wondering if any late model SHOs have done Pikes Peak.
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zps120f6de0.jpg)
wish me luck...
Good luck! Thanks for the pretty picture. What are you doing?
GTR turbo swap... one of them is bad (leaking A LOT of oil through the seals) and I'm swapping both IF and only IF I can get those suckers out.
I wonder if anyone knows what a U0131 code is. I had my oil changed today. When returned to stock before I went in, it showed that code. While I was at the dealer, the mechanic looked it up for me. I saw the screen and it wasn't there?!?! From google, it looks like some kind of traction control maybe.
Quote from: DJE624 on September 26, 2013, 02:19:16 PM
I wonder if anyone knows what a U0131 code is. I had my oil changed today. When returned to stock before I went in, it showed that code. While I was at the dealer, the mechanic looked it up for me. I saw the screen and it wasn't there?!?! From google, it looks like some kind of traction control maybe.
That must SUCK! I don't have to flash to stock for oil changes--my boys don't care one bit.
Some type of "Lost communication with power steering control module" code, transitional in the process of flashing the PCM.
Eh, probably didn't have to. Just being safe with new dealer. Not a big deal. I also get a renewed sense of what the tune does for me.
Quote from: SHOdded on September 26, 2013, 06:40:54 PM
Some type of "Lost communication with power steering control module" code, transitional in the process of flashing the PCM.
Thanks Shodded! That's weird. It had the code before I flashed to stock.
I have had a few communication codes before. I think they are just little mis-communications. I didn't have it a week or so ago.
I think thats fairly common for that to pop up when flashing tunes.
Thanks Chris.
I am also wondering why, when I lift at high rpms, they hold up there for a couple seconds. Is this because there is no torque management? I have to be careful to lift at lower than 6K or lower.
Not sure I understand you Dave. If your describing lifting off gas while under hard acceleration. The motor continues to rev, I have experience as well. And I have chalked up to just being normal quirk. Also I have experience after several WOT's in a brief time. Such as dodging in and out traffic that throttle will be come unresponsive. And again I think the computer just know how to handle these changes as quickly as we like.
Got scared last night when I got on the throttle and didn't see the meth pump light coming on... stopped hit the test button and the engine almost stalled but the light didn't turn on. So happy it's only the LED.
I'm about to drive 2-1/2 hours for a custom TurboXS exhaust for the RX8-R3.
TurboXS is based in Maryland, woot; gonna be a fun filled day of backroads cruising in the ol'gal.
Weird to think the SHO probably gets better MPG than the RX-8?
better mpg and less oil as well... but in the RX-8 it`s by design.
You in Gaithersburg, MD today, Storm? I'm only about 20 min away just east of Silver Spring.
Quote from: crash712us on September 27, 2013, 05:33:08 AM
Not sure I understand you Dave. If your describing lifting off gas while under hard acceleration. The motor continues to rev, I have experience as well. And I have chalked up to just being normal quirk. Also I have experience after several WOT's in a brief time. Such as dodging in and out traffic that throttle will be come unresponsive. And again I think the computer just know how to handle these changes as quickly as we like.
You understand. Thanks!
Quote from: Josephm on September 27, 2013, 10:43:59 AM
Weird to think the SHO probably gets better MPG than the RX-8?
Yes; I'm lucky if I get 180 miles on a 19 gallon tank--car sucks fuel like a bad lawnmower, but it sound soooo good! I ate through 1.5 QT's of oil 400 miles after oil change because of driving it hard LOL. Gotta love that rotary!
Quote from: SHOdded on September 27, 2013, 12:05:58 PM
You in Gaithersburg, MD today, Storm? I'm only about 20 min away just east of Silver Spring.
Dammit to hell! Yeah I was there, for most of the day because we ran into some snags.
I really wished the paddle shifters were useful. I went to use them for the first time tonight and was let down immensely. I couldn't even get it to shift into first, or down shift while rolling.
Was really hoping for at least being able to down shift with the paddle shifters that way I didn't have to punch it and wait for it to down shift, I could already have the rpm's up.
I don't like them because it's a pain to shift while you are turning the wheel. It's a gimmick. They should have stayed with the side gate on the shifter. My biggest gripe.
Quote from: Josephm on September 28, 2013, 12:22:40 AM
I really wished the paddle shifters were useful. I went to use them for the first time tonight and was let down immensely. I couldn't even get it to shift into first, or down shift while rolling.
Was really hoping for at least being able to down shift with the paddle shifters that way I didn't have to punch it and wait for it to down shift, I could already have the rpm's up.
Thats weird - our Sport will let me down shift just about anywhere with the paddle shifters. I almost always use them to downshift before I pass someone. I like the fact that I can use the paddles while in the regular "D" position on the shift knob.
No probs, Storm! Hope you got those snags worked out? We'll try for a meetup next time :)
Quote from: SHOdded on September 28, 2013, 03:56:35 AM
No probs, Storm! Hope you got those snags worked out? We'll try for a meetup next time :)
I'm up for it any time, lemme know! The drive isn't bad.
Sent from a mobile, I think.
Quote from: CooperS7777 on September 28, 2013, 01:42:53 AM
Quote from: Josephm on September 28, 2013, 12:22:40 AM
I really wished the paddle shifters were useful. I went to use them for the first time tonight and was let down immensely. I couldn't even get it to shift into first, or down shift while rolling.
Wow that would be amazingly at anytime be able to down shift with them
Was really hoping for at least being able to down shift with the paddle shifters that way I didn't have to punch it and wait for it to down shift, I could already have the rpm's up.
Thats weird - our Sport will let me down shift just about anywhere with the paddle shifters. I almost always use them to downshift before I pass someone. I like the fact that I can use the paddles while in the regular "D" position on the shift knob.
Lucky.
I can't remember the last time I used the paddle shifters...
I do occasionally use the console manual option (sport mode) in my 09' G8 because it has a stall converter and a BIG tranny cooler, and sometimes when fluid is cold, it needs to be nudged into 6th.
2010 Mazda RX8-R3 TurboXS Exhaust (http://www.youtube.com/watch?v=NDklOHXv_84#)
Annoying people in the Baltimore tunnel while crawling in traffic.
Certainly know how to get noticed, Storm :) Sounds mean!
Quote from: SHOdded on September 28, 2013, 01:15:48 PM
Certainly know how to get noticed, Storm :) Sounds mean!
It's coming along very nicely!
I ordered the coil overs, wheels, and tyres today, wheels are from Japan and about 3 month wait.
She will come out next year looking fantastic!
Sent from a mobile, I think.
Wow, I thought the boat from China was slow! What wheels are you getting?
Quote from: SHOdded on September 28, 2013, 01:20:14 PM
Wow, I thought the boat from China was slow! What wheels are you getting?
Volk Racing CE28n 10 spoke hyper bronze 18x9.5 with Pole Position 265/35R18 and Stance SS coil overs.
Sent from a mobile, I think.
Planning on doing any drifting in the RX8, or strictly drag 'n' track? Serious setup for looks 'n' go!
Quote from: SHOdded on September 28, 2013, 01:35:42 PM
Planning on doing any drifting in the RX8, or strictly drag 'n' track? Serious setup for looks 'n' go!
Drifting and track with my mates who run Miata's.
Sent from a mobile, I think.
Cleaned the car yesterday, figured I would check the air in the spare, it was 20PSI, supposed to be 60. For those of you that have one, make sure you check yours. The dealer doesn't do it for you when you take it in for you oil change services.
Happy about pulling a 5.1 0-60 today. Cooler weather is coming!
Talking about mph and not ft timing, right, Dave? O:-) Need to get you into the 4's!
Yep! Another 10-20 degree drop and I'll be there.
I've tried to do a 0-62 pass last night... AWD kill joy kicked in and when the power came back it kicked in again.
Yeah, that happened to me with the TC on. It went smooth with it off.
Quote from: DJE624 on September 29, 2013, 10:20:08 PM
Happy about pulling a 5.1 0-60 today. Cooler weather is coming!
I read this as "Happy about pulling a 5.1 60' today.", it took me 3 times before I got it right...I guess I need more coffee tonight!
Quote from: DJE624 on September 30, 2013, 01:21:00 PM
Yeah, that happened to me with the TC on. It went smooth with it off.
my tc was off...
I work offshore...I miss being able to drive. It's even worse when I can pull up the heliport cam and look at where she is parked...
sun bit off more than i could chew. had to make a quick run to hardware store & local one was closed so had to get on hwy. came up on a camaro zl1 & he gave me the nod & waved bye, bye. all i can say is that's it's fast they say, got a good look at those ugly taillights!!!!
mikev
4Dr Mike and I finally met up at his Dyno shop!!!! FULL RACE Engineering - Phoenix, AZ. He gave me a ride in his Dragon Wagon... Minor problem... wet seat issues, and he had to drive around for a few minutes to get my color back from PANIC WHITE!!! Great Guy! We are privileged to have him as our forum owner!
(http://i334.photobucket.com/albums/m406/RobMoser/2013-10-08152056_zps2ae6e15c.jpg) (http://s334.photobucket.com/user/RobMoser/media/2013-10-08152056_zps2ae6e15c.jpg.html)
I only wish I were that young again!
Quote from: EcoBrick Bob on October 09, 2013, 01:05:45 AM
4Dr Mike and I finally met up at his Dyno shop!!!! FULL RACE Engineering - Phoenix, AZ. He gave me a ride in his Dragon Wagon... Minor problem... wet seat issues, and he had to drive around for a few minutes to get my color back from PANIC WHITE!!! Great Guy! We are privileged to have him as our forum owner!
(http://i334.photobucket.com/albums/m406/RobMoser/2013-10-08152056_zps2ae6e15c.jpg) (http://s334.photobucket.com/user/RobMoser/media/2013-10-08152056_zps2ae6e15c.jpg.html)
I only wish I were that young again!
Wow! That's freaking cool EBB! What a great pic, and what a great opportunity to meet the man, the myth, the legend himself.
You are right, we are
ALL very lucky to have 4DR as involved as he is, in the EB platform. :bow:
Sent from my DROID3 using Tapatalk 6
A great photo opp that was NOT missed :D Kewl :thumb:
Did not recognize Bob without the whiskers.
Thanks for coming out Bob, great meeting you. Sorry I couldn't give you a good 0-110MPH pull :D
Great picture! Glad you guys were able to meet up.
Quote from: EcoBrick Bob on October 09, 2013, 01:05:45 AM
4Dr Mike and I finally met up at his Dyno shop!!!! FULL RACE Engineering - Phoenix, AZ. He gave me a ride in his Dragon Wagon... Minor problem... wet seat issues, and he had to drive around for a few minutes to get my color back from PANIC WHITE!!! Great Guy! We are privileged to have him as our forum owner!
(http://i334.photobucket.com/albums/m406/RobMoser/2013-10-08152056_zps2ae6e15c.jpg) (http://s334.photobucket.com/user/RobMoser/media/2013-10-08152056_zps2ae6e15c.jpg.html)
I only wish I were that young again!
Great pic, although Bob looks better with a helmet on lol! The wet seat issue... is it a consequence of the WOT (did you pee of scare on his seat? lol).
Must be impressive that Flex too!
I don't know if the "Legend" is bigger than me... but he is taller... and I'm 6'.... or was... LOL ! WOT power at 50 mph feels much like my G8 at 10 mph... Flex also looks as good as it "feels"! And I thought mine was low to the ground!
6'4" 282lbs and dropping, have to wrestle at 214 in May so I need to be 220ish by April. Was 315 in July :D
Our 6'5" son rides a bike to work (9 mi round trip) almost every day yr round. Perhaps riding back and forth to Full Race garage would work.... LOL Just stay out of the "fast lane"!
Quote from: EcoBrick Bob on October 09, 2013, 11:58:48 AM
Our 6'5" son rides a bike to work (9 mi round trip) almost every day yr round. Perhaps riding back and forth to Full Race garage would work.... LOL Just stay out of the "fast lane"!
I've been hiking 3 miles a day and wrestling for 2 hours a day. Nothing gets you in wrestling shape like wrestling. :)
You coach wrestlers, right, Mike? What is YOUR avenue for wrestling?
Quote from: SHOdded on October 09, 2013, 12:13:17 PM
You coach wrestlers, right, Mike? What is YOUR avenue for wrestling?
We have open tournaments in the spring and Veteran Nationals in May, in Vegas. I compete in the 97KG division C (8 year spread)
I've competed a couple of times in the competition already, once at heavyweight and once at 97KG. I'm just a skinny guy with boobs and a belly at 285. :)
Pic of me wrestling Greco at nationals 2 years ago. I hurt my achilles tendon right after this and put on a ton of weight, I'm finally fixed thanks to being Gluten free and ready to workout! :)
Holy sh!t Mike. I have known you for a lot of years now, but I don't think I have EVER seen you that thin! The spandex works wonders for you! :hitit2:
That is blood, sweat and tears on the wrestling room, I'll be bigger and stronger this year at 97KG, I want to win it this year! 2x All American isn't good enough for me, national champion!!! I also am considering going to Worlds which will be in Europe somewhere to compete :) Not bad for a guy who learned to wrestle in his late 30's.
You look so relaxed in that pic, Mike :) Did you go on a Paleo also to get back to fighting fit (along with gluten free)? I hope there will be vids of your competitions too!
Quote from: SHOdded on October 09, 2013, 03:48:06 PM
You look so relaxed in that pic, Mike :) Did you go on a Paleo also to get back to fighting fit (along with gluten free)? I hope there will be vids of your competitions too!
No videos :)
I tried Peleo because I was seriously hurting physically. It took me probably 30 seconds to be able to bend down and pick something up off the floor. Even there in that pic I was in great cardio shape but right after working out my hips and knees would stiffen horribly and I couldn't hardly move. I have never been able to get flexible and now all of a sudden I can not only touch the floor but put my fingers under my feet and straighten my legs. I took a 5 mile hike on Monday and no soreness or stiffness the next day, that wouldn't happen before, once I would cool down I would be stiff everywhere for the entire day. I just assumed that it was part of being 40 and that the pain and stiffness would be with me for the rest of my life, NO MORE! No bread, no pasta no white potatoes and I am loving life!
My media port is working again and reverse camera doesn't flicker anymore...... Thank-you Rochester Ford.
I ordered my tuning magic box from Livernois yesterday. And today I am awaiting some friends arrival to break down 5 aquariums and put them on consignment for me. Have to take a hiatus from the African Cichlid hobby due to health issues... I'll get into it again once I get this straightened out...
Should have got Ecoboost Performance Parts hot pipes!
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zps92b90eea.jpg)
Quote from: DJE624 on October 14, 2013, 02:33:41 AM
Should have got Ecoboost Performance Parts hot pipes!
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zps92b90eea.jpg)
That's freak'n awesome...... ha!
Dave you've had some time it appears to be poking around the net to find these obscure things.
On another note, could you imagine if the owner/driver of that sh!tbox developed an oil leak?
Suffice to say he'd have even greater difficulty seeing the road ahead of him, beyond just those pipe obstructions alone.
Yikes! :doh:
"Sent while on the road, burn'n meth, screeching tires, winding out the gears, & push'n the twins"
I thought that was a pix of BPD's custom CAI, HOT PIPES, & NEW TURBO(S) - "BEFORE" his custom WHITE powder coating.... LOL
When you see this BPD... hope you are feeling better!
I've joined the old fart club today!!! :)
I bought myself some shaving soap, a brush and straight razor :D
So far the best shave I've ever had!
My Grandson Owen is getting his first car for his first birthday from Grandpa (me). His Mother has instructions to keep it nice for him until he gets older. Limited Edition 1 of 756. Too bad they didn't have White Platinum!
(http://i1059.photobucket.com/albums/t440/DJE624/Owens_zpsacaeecb9.jpg)
Setting expectations high already, eh, Dave?
Quote from: PopolZ on October 16, 2013, 05:39:13 PM
I bought myself some shaving soap, a brush and straight razor :D
"Old school" is in! What did you pick for your grooming needs?
Quote from: SHOdded on October 16, 2013, 09:53:47 PM
Setting expectations high already, eh, Dave?
If I can, I will try to save the real thing for him! 15 years.
Quote from: SHOdded on October 16, 2013, 09:55:12 PM
Quote from: PopolZ on October 16, 2013, 05:39:13 PM
I bought myself some shaving soap, a brush and straight razor :D
"Old school" is in! What did you pick for your grooming needs?
Picked up an omega brush, dovo 5/8" razor and some proraso green soap.
I've tried most of the single/multiblades razors available + a few electrics and a lot of shaving creams. My skin would get swollen, get hot and itchy within 10-15 minutes after a shave even if I tried to shave everyday.
Today was the first time in well over a years since a blade touched my face. It did get red and a bit itchy but nothing as bad as before.
Quote from: DJE624 on October 16, 2013, 10:04:44 PM
If I can, I will try to save the real thing for him! 15 years.
That'd be really cool!
Quote from: PopolZ on October 16, 2013, 11:03:52 PM
Picked up an omega brush, dovo 5/8" razor and some proraso green soap.
I started off shaving old school, switched over to the disposable multiblades as they are "adequate" and didn't have to deal with brushes. But lately discontented with the quality for daily shaving, need to invest in a sturdier solution :)
I'm thinking I'll keep my stock exhaust.
(http://i1059.photobucket.com/albums/t440/DJE624/1_zps19a557f9.jpg)
Quote from: DJE624 on October 19, 2013, 01:45:21 AM
I'm thinking I'll keep my stock exhaust.
C'mon Dave, what's a decimal point between friends ;) Nice find!
but the shipping's free!
12 hours of sleep after working from 5:30am until 10pm between day job and working on Flex for 3 weeks is heaven!!!
Took the Torque out for a spin today. Good news and bad news. The good news is great! My 0-60 MPH is now 4.9 (at 40 degrees temp.) The bad news is that I am only registering 12psi boost. Scratching my head on that one. Does boost go down in colder weather because the air is more compressed (cooler) to begin with? IDK. I put in a call for Anthony.
I believe that boost output is based on engine load. So temp will have an impact on how much boost you see.
Sent from my DROID RAZR HD
I drained our summer home today... All water lines are overhead so I had to "blow" them out! Lucky I have lots of wind....LOL
We are on the slow boat to FLA! Finally....
Quote from: EcoBrick Bob on October 24, 2013, 07:26:18 PM
I drained our summer home today...
Please explain, interested to know more :)
When you shut off the heat in the winter you need to drain the water pipes so they don't freeze and burst.
Quote from: SHOdded on October 24, 2013, 10:10:05 PM
Quote from: EcoBrick Bob on October 24, 2013, 07:26:18 PM
I drained our summer home today...
Please explain, interested to know more :)
Takes about 2-3 hrs. I have to remove all solonoids from Dishwasher, Refrigerator etc and shake water out of them, as well as drain all lines that have any water in them, (appliances and all toilets, faucets etc.) then I have to blow the overhead lines out with air compressor so any water in copper pipes is pretty much out. Otherwise they would freeze and burst. Blew out about 3 gal of water from softener and drain all water out of water heater. Use about 2 gal of anti-freeze ( car type - full strength) in all the drains. couple cups in each. A plumber would charge me at least $300. plus materials. And... probably make a mistake.
Several years ago we used to leave heat on, but furnace blower motor failed when it was 20 below and we had ice in toilets and about ten split pipes. Took the Furnace repair man 4 hrs to get water turned off at our outside shutoff as the neighbor had piled 4 ft of snow and ice on top of it.
Then in spring, it took me a day to fix and solder all the copper connections.
Yikes Bob..... sounds like a crap load of work.
Quote from: bpd1151 on October 25, 2013, 01:54:34 PM
Yikes Bob..... sounds like a crap load of work.
No kidding! You are one handy guy, EBB! I have so much to learn yet from y'all ...
Just watched a great show on National Geographic about Ford Motor Company. Lots of old and new footage.
Quote from: SHOdded on October 25, 2013, 02:58:05 PM
Quote from: bpd1151 on October 25, 2013, 01:54:34 PM
Yikes Bob..... sounds like a crap load of work.
No kidding! You are one handy guy, EBB! I have so much to learn yet from y'all ...
Now if I could only make love to myself my life would be perfect!!!! LOL LOL LOL OMG!!!!!!!
Quote from: DJE624 on October 25, 2013, 06:22:48 PM
Just watched a great show on National Geographic about Ford Motor Company. Lots of old and new footage.
Do you know if there is a repeat airing?
Quote from: SHOdded on October 26, 2013, 12:22:59 AM
Quote from: DJE624 on October 25, 2013, 06:22:48 PM
Just watched a great show on National Geographic about Ford Motor Company. Lots of old and new footage.
Do you know if there is a repeat airing?
No, sorry I don't. This is all I could find on their site. Keep an eye out. It was pretty good.
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zpsd1e6ec10.jpg)
UGH; I have an extremely annoying, clingy, pain in the booty hole girl right now.
You'd think my ignoring you would be a sign that you've lost your mind and to gtfo!
I don't appreciate waking up to 5 missed calls and 27 text messages. WTF
Quote from: geswek on October 26, 2013, 11:18:40 AMI don't appreciate waking up to 5 missed calls and 27 text messages. WTF.
Storm......
What's your phone number there cupcake?
Sent from my DROID3 using Tapatalk 2
Quote from: bpd1151 on October 26, 2013, 11:36:55 AMStorm......
What's your phone number there cupcake?
Sent from my DROID3 using Tapatalk 2
HAHA, that is NOT happening! I do not need 300 messages because you're bored out of your mind on third shift LOL.
Oh yes, please post your number....I'd love to leave you a few! >:D
Quote from: geswek on October 26, 2013, 11:18:40 AM
UGH; I have an extremely annoying, clingy, pain in the booty hole girl right now.
You'd think my ignoring you would be a sign that you've lost your mind and to gtfo!
I don't appreciate waking up to 5 missed calls and 27 text messages. WTF
Oh Storm, what you need is a wife...you have no idea of what you're missing....having a wife would have you enjoying life sooo much more....
Quote from: geswek on October 26, 2013, 11:41:59 AMHAHA, that is NOT happening! I do not need 300 messages because you're bored out of your mind on third shift LOL.
Oh come hither now Storm......
Don't be so playfully coy......
You know you wanna post up those digits of yours for the entire community.
We promise, we won't call you :x:
Quote from: mjhpadi on October 26, 2013, 12:44:19 PM
Quote from: geswek on October 26, 2013, 11:18:40 AM
UGH; I have an extremely annoying, clingy, pain in the booty hole girl right now.
You'd think my ignoring you would be a sign that you've lost your mind and to gtfo!
I don't appreciate waking up to 5 missed calls and 27 text messages. WTF
Oh Storm, what you need is a wife...you have no idea of what you're missing....having a wife would have you enjoying life sooo much more....
I've already been married, I don't miss it one bit.
Sent from a mobile, I think.
Quote from: geswek on October 26, 2013, 01:51:43 PMI've already been married, I don't miss it one bit.
Was it those perky, etch my V.I.N. # in my windows, nipples of yours that scared her away??
Quote from: geswek on October 24, 2013, 08:54:59 PMYES, my nips were standing up--don't make fun of me, OK, go ahead--lay it on me. LMAO
(http://www.stormwalker.me/trash/wo.storm1.jpg)
Sent from my DROID3 using Tapatalk 2
Quote from: bpd1151 on October 26, 2013, 02:00:27 PM
Was it those perky, etch my V.I.N. # in my windows, nipples of yours that scared her away??
Sent from my DROID3 using Tapatalk 2
No, it was her lack of loyalty and the decision to f**k half the town while I was in Iraq.
It's alright, she's remarried to a postal worker who makes $36k year and has 3 kids from two other girls.
I won in the end--
Yikes.
I would agree. You won in many ways.
Sent from my DROID3 using Tapatalk 2
Quote from: bpd1151 on October 26, 2013, 03:11:28 PM
Yikes.
I would agree. You won in many ways.
Yes, very much -- I'm not vain, at least I don't think I am, hell maybe I am. I ran into her a few years ago and at the time I had a 2010 Audi S6 (it was short lived, NEVER BUY AUDI, piece of crap V10). Her expression when I stepped out of it in a full blown suit was priceless. I just gave her the gangster nod.
It's cold here; time to take the SHO out and boost! HEY how's the turbo's coming Mike? I bet you are TOTALLY STOKED!
Quote from: bpd1151 on October 26, 2013, 02:00:27 PM
Quote from: geswek on October 26, 2013, 01:51:43 PMI've already been married, I don't miss it one bit.
Was it those perky, etch my V.I.N. # in my windows, nipples of yours that scared her away??
Quote from: geswek on October 24, 2013, 08:54:59 PMYES, my nips were standing up--don't make fun of me, OK, go ahead--lay it on me. LMAO
(http://www.stormwalker.me/trash/wo.storm1.jpg)
Sent from my DROID3 using Tapatalk 2
Mike, why oh why did you repost that photo??? After the first look, it took several Tylenol 3 with Codeine washed down with alcohol and several hours of sleep to erase it from my already damaged eyes! Here we go again! :ohnoes:
Haha..... c'mon now, Storm ain't all bad. Kudos to him for being vulnerable.
I felt dorky when my lil one grabbed her iPad & recorded my ATP Turbo unveiling. Especially since I was still all puffy in the face from the surgery.
But yes, i'll agree with you a little, perky man nips do tend to be a tad bit frightening for sure.
Moving along......
Storm, i'll be more stoked about my new turbos once I can pay off the remainder of the hard pipes on the hot side, get those PC'd, installed, & then arrange (and drive out) for a newly revised dyno tune.
Until then, i'm just biding my time. Not really romping on 'em either. I'd prefer to do so after she's all dialed in properly.
Know what I'm say'n??
Sent from my DROID3 using Tapatalk 2
Quote from: bpd1151 on October 26, 2013, 01:28:15 PM
Quote from: geswek on October 26, 2013, 11:41:59 AMHAHA, that is NOT happening! I do not need 300 messages because you're bored out of your mind on third shift LOL.
Oh come hither now Storm......
Don't be so playfully coy......
You know you wanna post up those digits of yours for the entire community.
We promise, we won't call you :x:
yeah come on Lord!
I work for a phone company... I promise you'll never know it's me calling! :D
My first day off this week and I have to go in at 5PM for a "Leadership" meeting. Can you all help me so I don't stab my eyeball with my pen?
(http://stream1.gifsoup.com/view4/1132983/stewie-gun-suicide-o.gif) (http://gifsoup.com/view/1132983/stewie-gun-suicide.html) GIFSoup (http://gifsoup.com)
Got my new Hankook Ventus S1 Noble 2 from the Tire Rack yesterday and had them mounted and balanced today. Tomorrow I get a new upgraded Motocraft battery, oil and filter at the dealership. All ready for winter. Feels real good
Quote from: Larrylu on October 30, 2013, 04:34:51 PM
Got my new Hankook Ventus S1 Noble 2 from the Tire Rack yesterday and had them mounted and balanced today. Tomorrow I get a new upgraded Motocraft battery, oil and filter at the dealership. All ready for winter. Feels real good
Great Larry! Happy motoring!
Quote from: geswek on October 24, 2013, 08:54:59 PMYES, my nips were standing up--don't make fun of me, OK, go ahead--lay it on me. LMAO
(http://www.stormwalker.me/trash/wo.storm1.jpg)
The only thing missing here is you in an olde tyme swimsuit.
[/quote]
And maybe some handlebar on that hipster facial hair.
We are..... FINALLY...................... leaving Iowa and kids for FL!!!!! In fact in about 20 minutes... Zoom...Zoom...Zoom!!!!!
Read about this event on another forum, thought I'd pass it on:
http://www.performanceracing.com/tradeshow/ (http://www.performanceracing.com/tradeshow/)
Thanks for making me see Storm's nipples again.
Ha! Sorry about that :)
While we are now in Naples....
I am missing Storm and his fantastic imagination... or is it his bloviating!!!!! Whatever it is... I miss you STORM!!!
We know your Mazda is one of the 10 most missed vehicles sold here... I have 2 of the others... 2 G8'S!!! I just wish our widowed friend would finally get her husband's car out of the drive... Realize she doesn't want to look at it at her home... but I don't want to look at it anymore either!!!!!!!!!!!!!!!!!!!!! I can't get my G8 off jack stands or wash my Flex. Backup camera looks like it's vision is 20-200 due to road debris and rain!!
Haha, the R3 is parked for winter--no work to really do to it.
I'm still around; about to leave Thursday for Texas with the SHO--going to be an awesome 1600 mile drive down; can't wait to have a little fun with the twin turbo.
;)
Enjoy your trip... and understand that when you get south... the fast lane is the RIGHT lane... Beware of Buicks in the left lane!!!!
Quote from: EcoBrick Bob on November 05, 2013, 11:06:17 PM
Enjoy your trip... and understand that when you get south... the fast lane is the RIGHT lane... Beware of Buicks in the left lane!!!!
HAHAH; no kidding!
My 08 G8 battery was DOA when I took her off the jack stands yesterday. Tried and tried to charge. Finally gave up and bought a new battery from Autozone. Purchaed their top "Gold" same style battery but 160 CA bigger in same size case. After turning in old battery and receiving on line 20% discount. I paid $155. with FL tax. This was about $20. more than the best Motorcraft 850 CA I purchased for our Flex last summer from a Ford dlr.
Removing the battery from the trunk location is a BIG DEAL... Four bolts plus removal of the drivers side trunk liner!.. Damn heaviest battery I have ever lifted! I guess 5 + years isn't bad, even though the G8 has less than 24K mi. Then... my message center switched to Metric! That was also a big deal to switch back... Metric tire pressures are a hoot! Thankfully I had my GPS working so I knew how fast I was going... Old Dog has trouble instantly converting MPH to KPH!!!
Hoping the right parts for my headlight swap show up tomorrow. I have the headlights. Just need the new style bulbs or adapters to use them. The parts are on their way overnight from Tasca. They were supposed to go out Tuesday and didn't so they picked up the over night freight for me. Still kicking myself for wanting a lighter tint and pulling off the darker, along with the UV coating!
Aww damn, that sucks man.
Turns out they sent me headlights for the halogen and need xenon/projector. They're going back. Tomorrow, I'll be calling all the junkyards in Milwaukee. Hopefully, I can find a decent set.
Tasca! Pity they are adding to their "unreliable" reputation. Seems their parts counter needs some straightening out.
Bringing her in Tuesday. They will use whatever they can. They show that all the headlights are HID so they should be able to use the ones I have. Same part numbers for 2010 SE through 2012 SHO. I'll send whatever's left back. Great Ford dealer. Peck Ford in Clinton Wisconsin.
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zpsb38e55ef.jpg)
http://www.carthrottle.com/10-reasons-why-we-respect-ford-guys/
Quote from: EcoBrick Bob on November 10, 2013, 02:04:06 PM
My wife has asked me to put up the Christmas Tree today...
To early for that
The last race day has come so it's take the track tires off and back on with daily drivers .
(http://www.ecoboostperformanceforum.com/gallery/55_10_11_13_10_34_48.jpeg)
(http://www.ecoboostperformanceforum.com/gallery/55_10_11_13_10_35_45.jpeg)
Going to start the paint correction and CQuart finest today.... the work will be cheap compared to the new dining room and bedroom furniture I had to buy my wife so she'd be OK with it... at least she hasn't asked me to get a Christmas tree or decorate the house yet!
To all you fellow veterans out there.. THANKS!!!!!
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zpse485bc00.jpg)
Good one, Dave :D Words Of Wisdom for those not paying attention!
I just read that pic you posted Dave..... & that is absolutely freak'n hilarious!
:bow: I boweth to thee for making me laugh so hard, that I nearly pee'd on myself! :bow:
That's a keeper!
Sent from my DROID3 using Tapatalk 2
Last night my wife asked for help wrapping Christmas gifts. Almost had a stroke. But still we have 6 gifts ready. :o
Do you have your Christmas tree up like we do??? LOL
In defense of Wendy, our Son and GF are arriving tomorrow to go to Nascar at Homestead, and after they leave, we have less than 48 hrs before next Son and family come for Thanksgiving week. So... it was last Sun... or NEVER...
I don't wrap presents... we owned 2 China and gift shoppes for 16 years and I still have tape stuck to my fingers even though we got out of the business in 96'!
Quote from: EcoBrick Bob on November 14, 2013, 10:47:05 AM
Do you have your Christmas tree up like we do??? LOL
I am gracefull not yet!
We went to see Dr. Ben Carson tonite. Great motivational speaker.
Last night I found out Charlie aka GRRRR8, aka Charles Van Wormer, who founded the GRRRR8 Net Forum, the largest G8 forum, passed away late yesterday of cancer.
Charlie starter his forum after getting banned from the G8 Board Forum ( actually banned for life 3 times!!!) much like 4DR Mike found reasons to start EBPF. Charlie was in his late 40's and his father who had died of a heart attack a couple years ago, was my age. He leaves behind his wife Wendy and a teenage son in Houston, TX.
Charlie and I PM'd, e-mailed and phoned each other many times over the years, even before he started his forum. He was an ASE Master Mechanic who taught me a great deal about engines in general and what I needed for my G8's in particular.
At least he has no more pain and is at peace.
Too early to go! Sad to hear about his passing, and may he R.I.P. I am sure he had fun tearing up the highway to heaven :)
Thanks for the info EcoB.... RIP! SHOdded is right on both counts. I grew up down there, haven't seen him since I moved to AZ... knew him from Sugarland, TX
Well.... Even with mild temps the ash trees are dropping their leaves now.... A month of finding time to rake them so they don't get a foot deep... :smiley5:
Just randomly thinking, it seems there are more 2013 SHOs here than there are 2010-2012s.
also just random thinking. There are way more SHOs on this forum than any other EB vehicle
LOL
I ate three bagels for dinner tonight. 1 with cream cheese and tomatoes, one with butter, and one with honey butter.
Random enough?
I'd say so. Hope you can keep it down.
:werd:
On Top Gear w/ Tanner Faust last night they were testing trucks, F150 w/eco, Tundra & Hemi Ram. On the main real test of torque pulling an airplane around an airfield , the F150 w/eco blew the others away. The other guys had been called it not the King Cab but Queen cab due it's V6. That shut them up in a hurry. Also did well on 0-60-0. Real fun too watch.
Quote from: mval on November 20, 2013, 11:27:36 AM
On Top Gear w/ Tanner Faust last night they were testing trucks, F150 w/eco, Tundra & Hemi Ram. On the main real test of torque pulling an airplane around an airfield , the F150 w/eco blew the others away. The other guys had been called it not the King Cab but Queen cab due it's V6. That shut them up in a hurry. Also did well on 0-60-0. Real fun too watch.
That was awesome. If they went with the 6.2L that would have blown the other trucks away as well. But the fact that they got whooped on by a V6 makes it that much sweeter. I really like Tanner Faust. Those other 2 schmucks are dumb as hell and annoying.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) 2
Brad:
your right other 2 are goofs, only thing Tanner didn't like was even w/trac control off computer wouldn't let him slide it on the go kart track. I still believe our '10 SHO was get the bugs out for the '11 ECO F150, Ford's main moneymaker.
MikeV
Helluva week. TGIF!!!! It's raining cats and dogs (yes, in Phoenix) for the last 24 hours straight. Yard has about 6" of water, road is flooded.... Can't go drive (like I'd want to), wife's at work, no football on TV... Fighting the urge to shop for mods online.
My grandson got his first car when he turned one year old. Of course it's a SHO! Here, we see him contemplating performance mods for his Ecoboost.
(Don't worry, it went right back into the box after these pics were shot! I want him to save his first car for SHO(w), not playing! LOL)
(http://i1059.photobucket.com/albums/t440/DJE624/015_zps019bc7d6.jpg)
(http://i1059.photobucket.com/albums/t440/DJE624/016_zps874cf776.jpg)
A toy sho!!!where did you get that? Does it come in gem green?
Sent from my VS980 4G using Tapatalk
Sorry, no green. I think it's just silver, red and black. Here's where I got mine. BTW, I think it's pretty good quality and pretty heavily made.
http://www.ebay.com/itm/130484570524?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 (http://www.ebay.com/itm/130484570524?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649)
He'll know the set of keys to ask you for .... and sooner than you know! :drive:
Quote from: DJE624 on November 22, 2013, 10:31:14 PM
My grandson got his first car when he turned one year old. Of course it's a SHO! Here, we see him contemplating performance mods for his Ecoboost.
(Don't worry, it went right back into the box after these pics were shot! I want him to save his first car for SHO(w), not playing! LOL)
Awesome! :thumb: He's really enjoying it too!
http://youtu.be/_gaQLfvUqsc
Here's how I get great fuel economy in my lil 3.5L
(http://i334.photobucket.com/albums/m406/RobMoser/ResizedImage951384730503438_zpse0b7585c.jpg) (http://s334.photobucket.com/user/RobMoser/media/ResizedImage951384730503438_zpse0b7585c.jpg.html)
My Son...In his car...In his garage.
DON'T DO THIS AT HOME!!
Where can I get some of those non-smoking tires? :lol:
Garage floor is polished smooth and may have been damp. When I first saw pix, I thought he photoshopped it... but it is real... (stupid!)
Thanks Eb... My belly-laugh for today! :rofl:
We went to the Ritz Gumbo Limbo restaurant tonite with same son and family... He is dumber than I even thought!!! He PAID!
On the way there, I smoked a Camaro V-6 Conv... Guy took off to get ahead of me and got a real "quick" surprise!
Don't you love doing that Bob? I do!
It's fun to have a sleeper!
/''T''|[___|___] Whooooooooossssshhhh --------------->
[TT3.5 EB -OlllllllO-] Whooooooooossssshhhh --------------->
()_)"""()_)/"**")_) Whooooooooossssshhhh --------------->
...And Go Cards!
Just so I don't forget as the family arrives....
¡¡¡uıʍ sɯɐǝʇ ʇıɹoʌɐɟ ɹnoʎ ʎɐɯ puɐ ˙˙˙llA oʇ ƃuıʌıƃsuɐɥT ʎddɐH
.--.
{ / q {
{ ' (-(~'
{ '.{' )
{ ' - { ' .-""""""-.
{ . _ { '.' / '.)
{ _. { . {' ]
{._ { '{ ;'-=-. ]
{ -. { . ' { ';-=-.' /
{ ._. {.; '-=- .'
{_.-' ''.__ _,-'
[ ][ ]'
.='=,
HAPPY THANKSGIVING
Quote from: DJE624 on November 24, 2013, 07:08:01 PM
Don't you love doing that Bob? I do!
In your honor... I tried to get those 3 new Vettes to play tag... and then we ran into the SRT8 with MFG plates... Figued he was EAZY pickins.. even with 5 tenants in the Brick... BUT.. he never was in a passing zone when we coulda had fun!
Loved the sticker above the gas lid... said "Premium Only" Note... this was in BIG letters on the outside of the car!!! DAMN Engineers... too cheap to use 93!!!!!!
Just did my first winter slides :D
I wish I could disable the stupid ESC...
Thinking of a couple things like adding the SHO fender "vents", pulling the SHO emblems off the C pillars and trunk lid. Then maybe using just the SHO letters on the trunk lid. I've been thinking about it for a while but fighting the idea.
It's like a tune... Just do it. :devil:
LOL The hardest part for me would be separating the letters from the Ecoboost. I'll probably go ahead and order the "vents". I can get them for $75 plus ship. I hope if there is any shadow on the C pillar some wax will clean that up.
Quote from: BiGMaC on November 28, 2013, 12:09:44 AM
It's like a tune... Just do it. :devil:
x2! Take the leap, it's not like you don't have a bungee cord for safety :D
I'm glad the Christmas shopping is almost done........ :scooter: I had to park about 37 miles from the stores! Black "all Weekend!" :eyecrazy:
I always park way out. Been lucky for six months so far.
Truth is.. so do I.. I HATE PLDs, but usually I can at least see the mall from where I park. ::)
I find it interesting to see other nice cars parked way out. You know how they feel about them.
BTW, SHO Fender "Vents" ordered!
Second Law of Parking is ... "Whenever possible get a place against an esplanade and park as close as you can without rubbing your tires or wheels." LOL
So, who all went out to take advantage of the "Black All Weekend" (tx, BiGMaC)? What was your greatest score? Opportunities as good as in previous years?
I got myself a new cooking set
http://youtu.be/ucrM3TLLJRs
Then they have to deal with the checkout lines!
Got tickets for the "Duel In The Desert" tonight. :yell: The annual U of A vs ASU regional rivalry... :Boxing_gloves: Rankings and record don't seem to have much to do with the outcome. Should be good!
Going with my kids... problem is that they are a mix of alum from both. :crapfan:
Very disappointed in voter turn out for our Ride of the Month competitions. I just can't understand why any member would NOT vote. Or, enter for that matter. Thanks to all that entered or voted this year! We appreciate your enthusiasm!
Quote from: DJE624 on December 01, 2013, 11:11:08 AM
Very disappointed in voter turn out for our Ride of the Month competitions. I just can't understand why any member would NOT vote. Or, enter for that matter. Thanks to all that entered or voted this year! We appreciate your enthusiasm!
Just my experience or 2cents...
I'm on a very large custom motorcycle forum. They do ride of the month with pretty great turn out.
Here are some suggestions from that site.
First, each month for ROTM, you can change it up a little by making categories for that months ride. For example, only black color vehicles, only non PP SHO's, stock fords, or most extreme mods, or 500+HP vehicles only.. You get the picture. This might get more people involved by making it more specific...
Second, get some of our vendors to donate a small item for the winner. This will also encourage more people to get involved as, everyone wants something for free. The vendor benefits by being the ROTM sponsor on the home page for the month. Examples, badges, air filter, thermostat, or something small less than $100 value...(until site can leverage bigger prizing)
Third, create an annual EcoBoost forum ROTM Calendar. Each months winner gets a full page photo for their winning month and the other entrants get smaller quarter size images at bottom under actual month.
-each monthly winner will get their calendar for Free at the end of the year and everyone else can buy one for $15.00 each.... Again, you can allow the monthly Vendor sponsor their logo on each month they were the sponsor..
The benefits of all this will be big... More people will participate and more people will refer people.
The site will grow faster and vendors will see nice promo benefits from both calendars and ROTM mentions.
As site grows it will only get better. On my other forum, the prizing is sometimes over $1000 value...
The $15 calendars will also help raise money to promote the forum and build membership..
Timing is also perfect to start fresh with 2014...
Quote from: BiGMaC on November 30, 2013, 01:48:48 AM
Second Law of Parking is ... "Whenever possible get a place against an esplanade and park as close as you can without rubbing your tires or wheels." LOL
True. But the wife always shoots me a dirty look when I ask her to exit the vehicle so I can park.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) 2
Quote from: FracaSHO on December 01, 2013, 11:37:56 AM
Quote from: BiGMaC on November 30, 2013, 01:48:48 AM
Second Law of Parking is ... "Whenever possible get a place against an esplanade and park as close as you can without rubbing your tires or wheels." LOL
True. But the wife always shoots me a dirty look when I ask her to exit the vehicle so I can park.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) 2
Oh yea! I've seen that look when I ask mine to use the door handles instead of the window frame to open and close the doors.
Man, if looks could kill... :brick:
Oh I get the look from almost everyone when I tell them not to slam the door when the close it! I am amazed how many people think you have to slam the door to close it all the way...it drives me crazy!
As long as the doors are "well-hung" and do not have a door latch problem ...
After years of thinking about this it's my feeling that slamming the doors will eventually lead to problems requiring the doors to be slammed to close completely. I first noticed this with the side sliding doors in vans and minivans.
Sent from my DROID RAZR using Tapatalk
I am thinking of making a shrine for my SHO. This is just a very rough idea I made up on power point. It will be maybe 18 X 24. I hope to use the full size originals of cert and graph. Maybe an 8 X 10 (or a few smaller ones to show angles) glossy pic. (not that one) With a real emblem right off the actual SHO and a 12 sec slip(?). Might have to go bigger. Matted and under glass with a nice frame. I'll save it for my grandson.
(http://i1059.photobucket.com/albums/t440/DJE624/Captur_zpse834939d.jpg)
What a great idea and an even better idea to save it for the grandson.
Applause :clap2:
Sent from my DROID RAZR HD using Tapatalk
I'm with Mike on this one :) This is gonna be a cool & unique project, Dave.
Quote from: bpd1151 on December 05, 2013, 02:20:44 AM
What a great idea and an even better idea to save it for the grandson.
Applause :clap2:
Sent from my DROID RAZR HD using Tapatalk
Quote from: SHOdded on December 05, 2013, 04:31:11 AM
I'm with Mike on this one :) This is gonna be a cool & unique project, Dave.
Me 3! Cool idea! :thumbsup:
My Brick is getting Megan Coilovers installed as I write!
What colour do you think would compliment green gem?
Sent from my VS980 4G using Tapatalk
What color complement green gem for what? Another color paint to do a two tone theme? Decals? ...
That green is unique is hard to match with another color. I can only think of black, silver or white for the moment.
Red would be like Christmas, yellow like the Packers, etc. Lol
Finally getting my SHO fender "vents" tomorrow. They just went through the Oak Creek facility. Took a week to get them. 2nd day delivery. Too be fair, they were quoted to arrive between yesterday and tomorrow so they did arrive within that window. After finally deciding to get them after six months of pondering, I wanted them NOW. Pictures coming! Here is a teaser.
(http://i1059.photobucket.com/albums/t440/DJE624/Vent-Copy_zps789581c4.jpg)
Go for it!
Quit it with the teasing already, Dave :o
Steve, Decals, colored vents, the such.
Sent from my VS980 4G using Tapatalk
Then I'd try with green gem/ dark purple / silver(chrome)
I dreamed this was my car!!!
www.autoweek.com/article/20131206/CARNEWS/131209893 (http://www.autoweek.com/article/20131206/CARNEWS/131209893)
Where should we send the flowers?
EBB... Very nice dream!
Here's mine... fastest production car in the world, and a little more sedate.
http://www.bugatti.com/en/super-sport/special-editions/world-record-edition.html (http://www.bugatti.com/en/super-sport/special-editions/world-record-edition.html)
Those are both very nice. I still like this one.
http://www.ferrari.com/English/GT_Sport%20Cars/Classiche/All_Models/Pages/Enzo_Ferrari.aspx (http://www.ferrari.com/English/GT_Sport%20Cars/Classiche/All_Models/Pages/Enzo_Ferrari.aspx)
Sexy Ferrari!!!!
It was a Mclaren.... Ferrari would have been RED!!! I dream about Ferraris every night... Yesterday I saw 2 coming home from my Megan install. Have only seen 2 base Mclarens in 2 yrs here.
Well if you are guys are dreaming here's mine & it's not because it's white w/lots of black decals!!!!!!!! & EBB i see a brick just like yours well let's say looks like yours everyday going in & out of my subdivision & I think of it those hippy colors you talked about in one of your posts
Quote from: EcoBrick Bob on December 06, 2013, 03:26:47 PM
It was a Mclaren.... Ferrari would have been RED!!! I dream about Ferraris every night... Yesterday I saw 2 coming home from my Megan install. Have only seen 2 base Mclarens in 2 yrs here.
Just to confuse it I will paint my SHO Lambo orange.... BTW, I didn't see many Ferraris either until i got my new glasses! LOL... :smiley5:
I HATE cleaning up my garage after a hard day of modding... Found just the thing. Anyone can use it... with any pet. No more cleaning up! Check this out.
(http://i1331.photobucket.com/albums/w596/knot2bfound/PetSweep_zps5e80f2a3.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/PetSweep_zps5e80f2a3.jpg.html)
And there's options! Useful in the snow country!
(http://i1331.photobucket.com/albums/w596/knot2bfound/PetSweep2_zps14148771.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/PetSweep2_zps14148771.jpg.html)
Now all you need is a monkey to hand you a wrench!
Quote from: BiGMaC on December 06, 2013, 10:51:00 PM
I HATE cleaning up my garage after a hard day of modding... Found just the thing. Anyone can use it... with any pet. No more cleaning up! Check this out.
LOL!
Today ASU plays Stanford for the PAC-12 championjship... and an invitation to play in the 100th Rose Bowl!
GO SUN DEVILS!
:tvhappy:
Quote from: BiGMaC on December 07, 2013, 04:02:52 PM
Today ASU plays Stanford for the PAC-12 championjship... and an invitation to play in the 100th Rose Bowl!
GO SUN DEVILS!
:tvhappy:
Never mind....
I knew there was a laugh here.
What bowl is Illinois playing in???? LOL
Wisconsin is in Orlando and Iowa in Tampa on Jan 1.
The Toilet Bowl. (Just kidding all my Illinois friends.)
Quote from: DJE624 on December 08, 2013, 09:16:41 PM
The Toilet Bowl. (Just kidding all my Illinois friends.)
No offense taken, well at least not by me.
Personally, I can't wait to retire, in order to get the hell out of this State.
Sent from my DROID RAZR HD using Tapatalk
Don't worry, Jason is traveling elsewhere for the holidays, Dave! Now February, that might be a different story :D
Now what did I do with that hockey mask....? :axe:
As I read the concerns about 91 octane, 93 octane, NOS, meth, levels of tunes, etc. I thought about what get my motor running....
My personal tune starts with this fuel. It broke the octane ratings as I always pull at least a quad shot to get started.. no NOS required!
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/HiOctane_zps3b580cf8.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/HiOctane_zps3b580cf8.jpg.html)
Quote from: BiGMaC on December 14, 2013, 11:16:30 AM
As I read the concerns about 91 octane, 93 octane, NOS, meth, levels of tunes, etc. I thought about what get my motor running....
My personal tune starts with this fuel. It broke the octane ratings as I always pull at least a quad shot to get started.. no NOS required!
You need to upgrade your FPR to handle the load, or get new pipes laid to improve capacity :) An occasional shot of BG Cleaner every 5000 cups wouldn't hurt.
Dont know if it be talked about on the forum but just put led puddle lights in my mirror from daytime brightlites and im loving them. when i get my bumper and headlights back in i will post some pictures
Does anybody have a good picture of their headlights with the light tint called "tint" from Lamin-x on a 10-12? Thanks!
Quote from: DJE624 on December 20, 2013, 12:40:54 PM
Does anybody have a good picture of their headlights with the light tint called "tint" from Lamin-x on a 10-12? Thanks!
Or a '13?
So I finally got over the hump at work... got the spirit! To everyone here, thanks for all the support and comradery! :cheers:
•
/. ★
★ /. . ★
/. ✯ .
/. ☮ . ★
★ / ❄ . ★
/. ❀ ☃ . _[_]_
/.................... ( ' ' )
| |. --(. : )--
|__|. (. : )
sʎɐpıloH ʎddɐH puɐ sɐɯʇsıɹC ʎɹɹǝM
Love your graphics/icons, BiGMaC! Happy Holidays & Merry Christmas to you & yours :D
Thanks. I just got the spirit of the season.... Even if you don't celebrate this holiday i wish you all:
。 ° · 。 · ˚ ˚ ˛ ˚ ˛
。° 。 ° 。˚ ˛ · ˚ ˚ ˛
★MERRY★ 。 · ˚ ˚ ˛
。CHRISTMAS 。 。°
_Π__ 。 ˚ ˚ ˛ ˚ ˛
/_____/ \。˚ ˚ ˛ ˚
l田田田 |門| ˚ ˛ ˚ ˛ ·
SNOW!!!!!
Bad day for this poor baby!
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zps63311953.jpg)
Over the top modding! Most people just use film to darken windows.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/HorseCar_zps92d00c73.jpeg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/HorseCar_zps92d00c73.jpeg.html)
Quote from: DJE624 on December 22, 2013, 11:39:25 PM
Bad day for this poor baby!
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zps63311953.jpg)
OUCH!!!!!!!!!!!!!!
Quote from: DJE624 on December 22, 2013, 11:39:25 PM
Bad day for this poor baby!
Ugh! Reminds me of mine except the hit was in a diagonally opposite position.
Quote from: BiGMaC on December 23, 2013, 12:02:49 AM
Over the top modding! Most people just use film to darken windows.
Indeed!
Oh boy! Circle track drivers... a ready made hot ride! Just need a can opener on fenders and some new drivers side wheels!
(http://i1059.photobucket.com/albums/t440/DJE624/Lights_zps30dc3f46.jpg)
Quote from: DJE624 on December 23, 2013, 01:43:33 PM
(http://i1059.photobucket.com/albums/t440/DJE624/Lights_zps30dc3f46.jpg)
Great pics Dave!
It's True! FUNNNNNNNnnnnn!!!!!! :razz1:
I'm cold... Is it cold out here or what???
Scotty... beam me up to FLA!!!
(stuck in IA)
Bob... Can't beam you up. The di-litium crystals are dead, but here's something close!
(http://i1331.photobucket.com/albums/w596/knot2bfound/ATreeforBob_zpsca26f8ef.png) (http://s1331.photobucket.com/user/knot2bfound/media/ATreeforBob_zpsca26f8ef.png.html)
LOL
Oy vey!
Quote from: dalum on August 02, 2013, 09:10:02 PM
Quote from: DJE624 on August 02, 2013, 08:47:39 PM
(http://i1059.photobucket.com/albums/t440/DJE624/ecoboost1_zps33594343.jpg)
Man I wish this pic was bigger!
The server for the forum resizes.... here's a limk to HD exploded photo about 3000 x 3000
http://www.drivingenthusiast.net/sec-ford/FMC-engines/6m35d-ecoboost/EcoBoost_ExploView_02_HR.htm (http://www.drivingenthusiast.net/sec-ford/FMC-engines/6m35d-ecoboost/EcoBoost_ExploView_02_HR.htm)
I can email it if you want.
Tom
Quote from: BiGMaC on December 24, 2013, 12:39:52 AM
The server for the forum resizes....
I just looked and here's what the gallery says: Max width 2500 pixels, Max height 2500 pixels. 3000x3000 is quite a bit outside the limits :(
Wife's birthday is today, and Christmas tomorrow... I'll be scarce here for a couple of days.... Good for you guys right? LOL
Thanks to all for the camaraderie and help!
/
-->*﹤--
/ o/
/_\_o
/ _/_0_
/_o_\_ \_
/_/_/ _/_/o
/@\_@\_\_
//_/O/_/ _/_/_
/_\_\_\_ \_o\_-
/_/0/_//_0_/_/@/_
/-\_\_\_\_\_\_\_\_\_
/_/o/_/_/@//_/o/_/0/_
[___]
Merry Christmas and Happy Holidays
to you and yours
Hope everyone is having a great Christmas..... My youngest daughter gave me this book. Left click for a larger view.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/DontBeaDick_zpsb5fd5ebf.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/DontBeaDick_zpsb5fd5ebf.jpg.html)
LOL How old is she?
26.. may not get any older... LOL
WAY TO GO FORD!
http://www.detroitnews.com/article/20131230/AUTO0102/312300073/1148/rss25 (http://www.detroitnews.com/article/20131230/AUTO0102/312300073/1148/rss25)
Quote from: DJE624 on December 31, 2013, 03:35:26 PM
WAY TO GO FORD!
http://www.detroitnews.com/article/20131230/AUTO0102/312300073/1148/rss25 (http://www.detroitnews.com/article/20131230/AUTO0102/312300073/1148/rss25)
Thanks for posting this Dave... Cool article.
Maybe Ford will showcase the SHO soon.
Quote from: DJE624 on December 31, 2013, 03:35:26 PM
WAY TO GO FORD!
http://www.detroitnews.com/article/20131230/AUTO0102/312300073/1148/rss25 (http://www.detroitnews.com/article/20131230/AUTO0102/312300073/1148/rss25)
Thanks for posting this, Dave. Though this makes me sad "Lincoln sales, through November, represent 3 percent of Ford's overall sales."
Anybody know how much of Ford sales is fleet sales?
After all our revery tonight we'll need road signs to be very explicit...
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/RoadSigns_zps8c4602cf.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/RoadSigns_zps8c4602cf.jpg.html)
This has got to be the longest week ever. Waiting for Friday to get new wheels and Saturday to go see all my Grand Kids! First, to my younger daughter to see the toddlers and then meeting my older daughter with her two older boys at the Holiday Inn Elgin for dinner at Friday's, swimming and a movie! It will be great driving down to IL with the new wheels. I hope it isn't too sloppy out by then!
Its one hell of a snow storm we are having in waukegan over a foot and counting!
Quote from: REDSHOCGO on January 01, 2014, 02:17:18 PM
Its one hell of a snow storm we are having in waukegan over a foot and counting!
PICTURES PLEACE!! It's only 46deg here in HOT ATLANTA. I only see show at Christmas time when I seeing you guy's pic.LOL
A splendid way to live the weekend, Dave! Be well and enjoy! AND I second shoman's motion for pics of SHOs in the wintertime :)
This is right now. I just cleaned her of a few minutes ago. We probably had a good foot or so this week.
(http://i1059.photobucket.com/albums/t440/DJE624/001_zpsb366d349.jpg)
Looks quite at home even in that setting, Dave!
An AWD paradise!
Quote from: DJE624 on January 01, 2014, 03:41:20 PM
This is right now. I just cleaned her of a few minutes ago. We probably had a good foot or so this week.
(http://i1059.photobucket.com/albums/t440/DJE624/001_zpsb366d349.jpg)
brererererrrrrrrrrr@!@!!! That looks COLD!!!!!! But PRETTY!LOL
WHAT DOES REDUCED TORQUE MANAGEMENT MEAN WHEN TALKED ABOUT WITH THE MYCALIBR8OR?
The stock tune drops revs between shifts. That is torque management. Custom tunes will reduce that drop. Kind of like speed shifting an MTX.
Does anyone have a stuttering 5th gen SHO? I was driving for maybe 10 min and stopped at a red light. I gradually take off from the light and cruise with traffic for a while. When i try to mash on the gas, the car hesitates and it feels like the transmission isn't engaging. It speeds up really slow like a creep. When i hit it for the second time, it takes off like normal. It has only happened twice. I purchased the car with 38k miles. It now has 42k miles. I don't know if the spark plugs have been changed with the previous owner. I have an Unleashed tune with methanol. I did not have the methanol installed when it happened.
Quote from: FO SHO on January 03, 2014, 08:21:48 PM
Does anyone have a stuttering 5th gen SHO? I was driving for maybe 10 min and stopped at a red light. I gradually take off from the light and cruise with traffic for a while. When i try to mash on the gas, the car hesitates and it feels like the transmission isn't engaging. It speeds up really slow like a creep. When i hit it for the second time, it takes off like normal. It has only happened twice. I purchased the car with 38k miles. It now has 42k miles. I don't know if the spark plugs have been changed with the previous owner. I have an Unleashed tune with methanol. I did not have the methanol installed when it happened.
Probably shaftening wires between cai and engine. There is a thread for that for sure in the forum... Many of us had that problem with 5th gen SHO. Someone can chime in to give the thread (I am at movies and it is starting lol).
GL!
Quote from: steve142857 on January 03, 2014, 09:46:15 PM
Quote from: FO SHO on January 03, 2014, 08:21:48 PM
Does anyone have a stuttering 5th gen SHO? I was driving for maybe 10 min and stopped at a red light. I gradually take off from the light and cruise with traffic for a while. When i try to mash on the gas, the car hesitates and it feels like the transmission isn't engaging. It speeds up really slow like a creep. When i hit it for the second time, it takes off like normal. It has only happened twice. I purchased the car with 38k miles. It now has 42k miles. I don't know if the spark plugs have been changed with the previous owner. I have an Unleashed tune with methanol. I did not have the methanol installed when it happened.
Probably shaftening wires between cai and engine. There is a thread for that for sure in the forum... Many of us had that problem with 5th gen SHO. Someone can chime in to give the thread (I am at movies and it is starting lol).
GL!
http://www.ecoboostperformanceforum.com/index.php?topic=554.msg15431#msg15431 (http://www.ecoboostperformanceforum.com/index.php?topic=554.msg15431#msg15431)
I found where those open wires were. They don't show any wear but i guess ill ask the tech to check it out. Thanks EB dam.
On the plane headed to Austin for a few days. Business, but friends, family (was born about 15 miles south in Buda), music, barbecue, and brew! ...gonna do all that! :beer: :band:
Like Willy says,"... ♫♫ just can't wait to get on the road again! ♫♫..."
Have a great time! Get back safe.
Not really about cars.... BUT
BE AWARE... The NSA is using a program called Dropout Jeep to access and potentially take over your iPhone. I would assume this is also true for Android and other phones. Check it out:
http://www.iphonelife.com/blog/5/news-reports-say-nsa-can-access-your-iphone?utm_source=newsletter-unspecified&utm_medium=email (http://www.iphonelife.com/blog/5/news-reports-say-nsa-can-access-your-iphone?utm_source=newsletter-unspecified&utm_medium=email)
All they're gonna hear on my phone is setting dates for my car and trying to get interviews.
Been heading this way for a while in the U S of A, no surprise.
On a lighter note..... As some know I'm in Austin this week. Weather is gloomy and drizzling rain... but They had a wet T-shirt contest this afternoon at a 6th street bar..... Here's pic of the Texas belle who won!
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/WetT-ShirtContestWinner_zps067a4334.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/WetT-ShirtContestWinner_zps067a4334.jpg.html)
Isn't Austin all about the blues and all that jazz? Great pic!
Expedited Shipping Available! Win at the strip this weekend!
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zps44a1e4df.jpg)
Quote from: BiGMaC on January 08, 2014, 04:46:03 PM
Not really about cars.... BUT
BE AWARE... The NSA is using a program called Dropout Jeep to access and potentially take over your iPhone. I would assume this is also true for Android and other phones. Check it out:
http://www.iphonelife.com/blog/5/news-reports-say-nsa-can-access-your-iphone?utm_source=newsletter-unspecified&utm_medium=email (http://www.iphonelife.com/blog/5/news-reports-say-nsa-can-access-your-iphone?utm_source=newsletter-unspecified&utm_medium=email)
Sorry to inform you, but we, I mean that has been available to LE for a couple years. Just need a court order to turn your mic on.....You never know it is on...
Sure feels good having got some things done that I have been wanting to be able to do! The only thing pressing now (when it dries up) is to get a wash, take some pics, oh, and test a new tune! Yeehaw!
Quote from: DJE624 on January 11, 2014, 03:39:48 PM
Sure feels good having got some things done that I have been wanting to be able to do! The only thing pressing now (when it dries up) is to get a wash, take some pics, oh, and test a new tune! Yeehaw!
....And the new sig pic continues to improve! Great package so far Dave! :notworthy:
Not too much if anything left to do on the exterior. I would say it's done but, you know......
New tune, Dave???
I wonder if anyone knows how to match the grey paint on the stock wheel mounts.
Am I the only one who thought Gravity was boring as hell?????
Don't get me wrong it's a very very very well made movie from every aspects but just a snooze fest.
Quote from: PopolZ on January 18, 2014, 06:55:38 AM
Am I the only one who thought Gravity was boring as hell?????
Don't get me wrong it's a very very very well made movie from every aspects but just a snooze fest.
It was a boring movie wife wanted to see it.
At my age EVERY movie is a snooze fest! :yes: Had to rent Elysium 3 times to finally see it all!
(http://i1059.photobucket.com/albums/t440/DJE624/Capture_zps15b6960f.jpg)
From Torque News 1-17-2013.... A new British production sports car from Radical, the RXC Turbo, is street legal with Ford 3.5 EB tuned to 450 HP in a 2070 pound car .... production to start for the 2015 model year..... with 0-60 2.9 seconds!
http://www.torquenews.com/106/ford-f150-ecoboost-v6-could-power-next-nurburgring-record-setter (http://www.torquenews.com/106/ford-f150-ecoboost-v6-could-power-next-nurburgring-record-setter)
Great news for the Ecoboost platform!
I'm just finishing up watch the West Coast Custom and the Desert Car Kings TV series. I thought I might see a few ideas. What a joke! I saw many flaws in the cars they turn out. Garbage! I don't think they made these shows for car guys. Very disappointing. I should have known better when I didn't watch them when they originally aired.
UGH! I have a teenage Grandson as of today.
Am I the only one here with random thoughts? :clown:
Be glad!!! Congrats. I've got kids on their 30's and no grandkids!!.. LOL
Quote from: DJE624 on January 19, 2014, 02:36:19 PM
UGH! I have a teenage Grandson as of today.
Comment withheld pending counsel's approval.
Quote from: DJE624 on January 19, 2014, 02:40:58 PM
Am I the only one here with random thoughts? :clown:
Comment withheld pending counsel's approval.
:P
Tonight I am watching the "Over Haulin" series with Chip Foose. Much, Much better. I almost cry when they give the guys their cars back!
Seems Leno is finally leaving the "Tonight" show come Feb. So Crash made his vacation plans to California just in time!
It's been a pretty tough six months looking for work. But, I just got the call! I start my new job Thursday! To say I am relieved is an understatement. I was starting to get worried about losing the SHO in the next six months. I'm good to go now!
Woohoo! You go, Dave! :thumb:
GREAT!! :WOOT: persistence pays off....
Hope my alarm clock works in the morning. Better test it.
Quote from: DJE624 on January 21, 2014, 01:09:30 PM
It's been a pretty tough six months looking for work. But, I just got the call! I start my new job Thursday! To say I am relieved is an understatement. I was starting to get worried about losing the SHO in the next six months. I'm good to go now!
Wow, sorry you've been dealing with that.
Congrats!
Thanks! I'm up this morning. Starting a new era.
Quote from: DJE624 on January 23, 2014, 06:05:46 AMThanks! I'm up this morning. Starting a new era.
Congrats once again & good luck on your 1st day back to the work force!
You'll be cursing in six hours from now, saying "Why dear God, why?"
Hahaha.....
Thanks! I'm there now waiting for the boss.
How's the new job so far?
Sent from my space grey 5S using an aPP called Tapatalk
Had a great day! I'm in good. Got the tour, keys, registered for punch clock, etc. I move to third shift next Thursday, after my weekend. I am also going to get a First Aid/CPR certification Tuesday. Great bunch of guys and the bosses are cool. It should be a breeze.
Way Good! Great to hear Dave.
Off to the dealer to pick up the wife's truck.....
Sitting in class knowing my corsa exhaust is sitting at my house.....................
That's tough. Are you gonna put it in tonight?
Congrats on a great first day, Dave. First of many to come.
No I am not but most likely its sitting on my front porch as it is to heavy for my wife to pull in......
Congrats on the job! Ive seen people out of work for years
I discuss this with bpd before posting.... legal advice ya' know... and I showed it to DJE, sorry to be redundant Dave!
One South Phoenix lady's bad experience with her SHO:
While she was "flying" down the road yesterday (only10 miles over the limit, a Phx tradition), a woman passed over a bridge only to find a PPD traffic officer with a radar gun on the other side lying in wait.
He pulled her over, walked up to the car, and with that classic patronizing smirk we all know and love, asked, "What's your hurry?"
To which she replied, "I'm late for work."
"Oh yeah," he said, "what do you do?"
"I'm a rectum stretcher," she responded.
The guy stammered, "A what? A rectum stretcher? And just what does a rectum stretcher do?"
Well," she said, "I start by inserting one finger, then I work my way up to two fingers, then three, then four, then with my whole hand in. I work from side to side until I can get both hands in, and then I slowly but surely stretch, until it's about 6 feet wide."
"And just what the hell do you do with a 6 foot ***hole?" he
asked.
"You give him a radar gun and park him behind a bridge..."
Traffic Ticket $95.00
Court Costs. $45.00
The Look on Officer's Face............ PRICELESS
I don't think BPD is 6'. :clown:
The issues just keep compiling. The car acts like it doesn't want to turn over sometime. All the electrical turns on but the motor is still trying to crank over and eventually it does. WTH. lol New battery as of September last year. 43k miles. Haven't changed plugs yet nor the thermostat but those are on the way per Torrie from Unleashed. I hope its not the alternator. If it is i hope its under warranty. =( This sucks.
What battery did you get? Could be defective, get it replaced under warranty if there are any signs of leakage or corrosion.
No signs on leakage. Its the auto zone duralast gold battery.
Time to break out a digital multimeter and check voltage on the battery a) while car is off and b) while car is running. Should be at least 12.5V/13.8V respectively.
Also, check the terminals to make sure they are tightly clamped onto the posts. I had one come loose on me one time on another car, turned out the terminal needed to be replaced (my local Merchant's did that for me). No issues since then.
My legs and back are killing me! Two more days then, a rest.
Adjusting to the new job, Dave? Third shift's gotta mess with your sleep timing.
I'm on first til after tommorow. I start third
Thursday. I'm just getting used to being on my grey all day.
Bummed out about my emblem that showed up today all scratched and with a dent. Now it will take at least another week to get a replacement. On the other hand the SP534's showed up too!
Seriously contemplating pulling the trigger and trading the SHO in on a 2011 shelby gt500 convertible. it has 17k on the odo. only 3k more than the SHO. They are asking 33k. going to offer mine plus 1k out the door...
Quote from: Shifrty1 on January 28, 2014, 02:11:20 AM
Seriously contemplating pulling the trigger and trading the SHO in on a 2011 shelby gt500 convertible. it has 17k on the odo. only 3k more than the SHO. They are asking 33k. going to offer mine plus 1k out the door...
Where is that? They're giving the Shelby away, easily a $40K+ car. Color?
The race is on!... But so far not much voting...
Be sure to vote your choice for the Feb 1014 Ride of the Month!
Here's the link. It's anonymous and fun.
http://www.ecoboostperformanceforum.com/index.php?topic=1925.0 (http://www.ecoboostperformanceforum.com/index.php?topic=1925.0)
it's torch red. got the year wrong its a 2008... seems 33k is steep plus offering me 30k for a car less than a year old that stickered at 46k... I know they depreciate but damn. kelly blue book states the shelby is at 45-47 retail. but I also know kbb can be unrealistic in their guesstimates..
Quote from: BiGMaC on January 28, 2014, 09:09:40 AM
The race is on!... But so far not much voting...
Be sure to vote your choice for the Feb 1014 Ride of the Month!
Here's the link. It's anonymous and fun.
http://www.ecoboostperformanceforum.com/index.php?topic=1925.0 (http://www.ecoboostperformanceforum.com/index.php?topic=1925.0)
I voted.
Quote from: Shifrty1 on January 28, 2014, 10:30:09 AM
it's torch red. got the year wrong its a 2008... seems 33k is steep plus offering me 30k for a car less than a year old that stickered at 46k... I know they depreciate but damn. kelly blue book states the shelby is at 45-47 retail. but I also know kbb can be unrealistic in their guesstimates..
$33K is about right for an 08. Not sure if the 08's have HID's. My 09 did, makes a big difference. If you get the car a TVS blower is a must. Stock blower on the 2013-14. Mine was pushing 630rw with TVS, tune, orx, catback, and injectors.
Quote from: black99lightning on January 28, 2014, 04:22:56 PM
Quote from: BiGMaC on January 28, 2014, 09:09:40 AM
The race is on!... But so far not much voting...
Be sure to vote your choice for the Feb 1014 Ride of the Month!
Here's the link. It's anonymous and fun.
http://www.ecoboostperformanceforum.com/index.php?topic=1925.0 (http://www.ecoboostperformanceforum.com/index.php?topic=1925.0)
I voted.
Thats the Spirit ..... Dont need to know who it was for ..
Just be PROUD to say I VOTED ! !
I voted! I also traded for the shelby. its flawless. red/black leather combo on the interior. I hope I dont have to leave this forum!!
Quote from: Shifrty1 on January 28, 2014, 10:32:08 PM
I voted! I also traded for the shelby. its flawless. red/black leather combo on the interior. I hope I dont have to leave this forum!!
Dang! That's hot!
I voted in the RotM... did you?
If you didn't... three clicks will do it, counting this one:
http://www.ecoboostperformanceforum.com/index.php?topic=1925.0 (http://www.ecoboostperformanceforum.com/index.php?topic=1925.0)
Voting TAB / BUTTON ... LINK on top of Home page NOW !
Quote from: Shifrty1 on January 28, 2014, 10:32:08 PM
I voted! I also traded for the shelby. its flawless. red/black leather combo on the interior. I hope I dont have to leave this forum!!
We expect you to stay :) I don't even have an EB and I am still here!
Bet you your loving that shelby..those are some hot cars
Quote from: Shifrty1 on January 28, 2014, 10:32:08 PM
I voted! I also traded for the shelby. its flawless. red/black leather combo on the interior. I hope I dont have to leave this forum!!
Yes, now GTFO! LOL. If you haven't already go to svtperformance.com. Lots of great information, especially in the GT500 section.
Here's some info posted this morning by FracaSHO for all you phone access folks...
http://www.ecoboostperformanceforum.com/index.php?topic=1947.msg26264#msg26264 (http://www.ecoboostperformanceforum.com/index.php?topic=1947.msg26264#msg26264)
I voted woot woot
My intakes need a blanky
Sent from my space grey 5S using an aPP called Tapatalk
Quote from: SHOdded on January 29, 2014, 05:02:25 AM
Quote from: Shifrty1 on January 28, 2014, 10:32:08 PM
I voted! I also traded for the shelby. its flawless. red/black leather combo on the interior. I hope I dont have to leave this forum!!
We expect you to stay :) I don't even have an EB and I am still here!
Well you better get one Manu! :clown:
Working on it, trust me!
Quote from: SHOdded on January 29, 2014, 05:02:25 AM
Quote from: Shifrty1 on January 28, 2014, 10:32:08 PM
I voted! I also traded for the shelby. its flawless. red/black leather combo on the interior. I hope I dont have to leave this forum!!
We expect you to stay :) I don't even have an EB and I am still here!
I AM ONE OF THE FOUNDING MEMBER HERE and if you don't put the SHELBY in the ROTM Contest!!! I vote you stay!!!! You to SHIFRTY my Freestar washes it was a EB FLEX:( LOL
seems like us in northern il are going to get slammed with snow again. I am so sick of Tom skilling and his bad news!
I feel for you all. Bravo on slugging it out!
Wishing it was 730 so I could go home and go to bed!
Quote from: DJE624 on February 01, 2014, 05:47:27 AM
Wishing it was 730 so I could go home and go to bed!
Bet your sleeping now...
Quick, go over there and change the time on his clock to PM from AM!!! J/K, Dave :)
That would be funny.....wonder how much snow he got today. He's gonna have to wake up to snow blow sooner or later..... O wait Nvm hes got a Shomobile so it shouldn't be a problem. :clown:
Driving home this morning was fun! We probably got 3". Maybe more. Had a pretty good "days" sleep!
A broken heart is one of the worst feelings in the world.
I lost what was supposed to be my future Saturday and I don't even know why.
1600 miles away and I couldn't see it coming.
Wow storm, I feel for you brother. Thought you two where like peas and carrots.
Sent from my iPhone using Tapatalk
Quote from: crash712us on February 02, 2014, 11:44:21 PM
Wow storm, I feel for you brother. Thought you two where like peas and carrots.
Sent from my iPhone using Tapatalk
So did I -- I'm completely numb right now. It was like everything we ever talked about, including marriage, was just a string of words formulating a sentence.
Again I feel for you, been there before. Give it sometime, it appeared to me you two got off on fast start. And that's great, but maybe to much to soon became over whelming. Stay strong my friend.
Sent from my iPhone using Tapatalk
Winter doesn't usually bother me too much. This year it does!
Quote from: geswek on February 02, 2014, 11:41:23 PM
A broken heart is one of the worst feelings in the world.
I lost what was supposed to be my future Saturday and I don't even know why.
1600 miles away and I couldn't see it coming.
Dang, Storm! Hopefully just a case of cold feet. Ladies do reserve the right to change their mind, so hang in there. Fingers crossed.
Quote from: crash712us on February 02, 2014, 11:56:53 PM
Again I feel for you, been there before. Give it sometime, it appeared to me you two got off on fast start. And that's great, but maybe to much to soon became over whelming. Stay strong my friend.
Yeah; I thought we were sure about it -- we've been best friends for years; wasn't anything to really learn of each other. It stings but I'll pull through.
Quote from: SHOdded on February 03, 2014, 12:50:23 AM
Dang, Storm! Hopefully just a case of cold feet. Ladies do reserve the right to change their mind, so hang in there. Fingers crossed.
Thanks but I think it's done. She went to the Superbowl Party yesterday with a bunch of our friends and family; few of them texted me and said she was just completely glazed--like nothing happened. It wasn't affecting her at all which pissed them all off because we were serious. They're not happy with her and I don't blame them.
I just boxed up all her stuff, heading to UPS to ship it back to her. This too will pass one day.
cant live with em...... cant live without em ..... life sucks sometimes ......
BUT it will go on for the Strong
Just wanted to get my 3000 before I go to work! :clown:
Congrats on the milestone, Dave! 5K here we come :clown:
LOL :clown:
Got the new emblem for the trunk lid today. It's not perfect but, close enough.
My Motorcraft SP-534 Iridium plugs were delivered from O'Reilys last night and I checked the gap today and they look spot on. Didn't have to touch them. Yesterday I also picked up a tube of "dielectric grease" and a tube of anti seize lubricant for the threads and a small torque wrench. My spark plug sockets are 13/16. Guess that shows my age. Should be able to get it done next week.
Sounds good Larry. Seems like most of the 534's are coming gapped at 30 now.
Quote from: DJE624 on February 04, 2014, 03:05:38 PM
Got the new emblem for the trunk lid today. It's not perfect but, close enough.
Very good! An exercise in delayed gratification for sure. LOL
Wanna see after you get it on!
Cylinder 4 misfire.....nuff said
Quote from: DJE624 on February 04, 2014, 03:05:38 PM
Got the new emblem for the trunk lid today. It's not perfect but, close enough.
Me wanna see too!
Quote from: REDSHOCGO on February 04, 2014, 06:37:36 PM
Cylinder 4 misfire.....nuff said
It's never 'nuff! Please do elaborate.
Replaced my spark plugs this weekend. Everything was fine but didnt really get on it. Went wot this morning and car shuddered and the check engine light came on. Checked code and showed ylinder 4 misfire. So I thnk it may be an issue with that particular plug. During normal driving it runs fine it is only when you get on it the problem surfaces
Sorry man. That blows chunks. Everything was secure? Hopefully the coil is okay and maybe you just have a bad plug.
Quote from: BiGMaC on February 04, 2014, 03:29:45 PM
Quote from: DJE624 on February 04, 2014, 03:05:38 PM
Got the new emblem for the trunk lid today. It's not perfect but, close enough.
Very good! An exercise in delayed gratification for sure. LOL
Wanna see after you get it on!
It's just the same Blue Oval except w/o the 1/4" peel at one edge.
Picked up 1" chair leg caps for my VTA. If it works out, I'll be ordering the K&N 62-1370's.
Will look nice, just browsed them on Amazon.
What are you using KN filter for?
Sent from my mobile, I think.
Wouldn't that be like putting a air filter on your exhaust pipe?
Sent from my iPhone using Tapatalk
I was thinking the same thing. AFAIK, what we did for vent is not oil recirculation, or is it?
Sent from my mobile, I think.
Crankcase ventilation filter. If you leave it on, it dirties the intake. If you leave it off, it messes up your engine compartment. Hence this filter. Plus the Bling factor.
I'm not following; the tubes we remove to get the blow offs would send air into the engine; not sure how that positive pressure would put crankcase fumes into the intake.
Quote from: REDSHOCGO on January 23, 2014, 06:26:10 PM
Sitting in class knowing my corsa exhaust is sitting at my house.....................
its like when I got a super nintendo lol
Sent from my SGH-I337M using Tapatalk
Quote from: SHOdded on February 05, 2014, 09:26:38 AM
Crankcase ventilation filter. If you leave it on, it dirties the intake. If you leave it off, it messes up your engine compartment. Hence this filter.
This is why 4DR suggested we develop a catch can like the one for the F150 EB.
http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26116#msg26116 (http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26116#msg26116)
http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26060#msg26060 (http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26060#msg26060)
I've not see any oil on my engine since I pulled my hoses 15k miles ago.
Quote from: DJE624 on February 05, 2014, 12:53:59 AM
Picked up 1" chair leg caps for my VTA. If it works out, I'll be ordering the K&N 62-1370's.
On second thought, those K&N's would allow more hot engine compartment air to get to the intake. I'm gonna hold off on them.
Cylinder four misfire was just a bad plug.....was right up front for me....since I had all that extra time set aside I installed the K and N CAI while I was at it. Woop Woop
Sounds good RedSHO. Glad you got her zipped up. Enjoy the Typhoon!
A lot of noise now DJE! Can't beleive the noise this thing makes.
im super pleased with how my car is running after switching the plugs something tells me i had those stock 2010 ones still. i had some misfire problems and short instances of lose of power. now it feels alot smoother and steady power threw the rpm range. :D makes me wanna do more to tune up the car.
how often to switch plugs on this car?
Sent from my VS980 4G using Tapatalk
Quote from: adelsin on February 06, 2014, 09:55:29 PM
how often to switch plugs on this car?
Sent from my VS980 4G using Tapatalk
im pretty sure ford official thing was 60 miles or something. Im hoping these new ones last longer then 60000 km's
60 miles?
Sent from my VS980 4G using Tapatalk
Seems they have overlooked the spark plug replacement interval in their online guides, or they are revising it. Can't find the pertinent PDFs, Ford seems to be revising all their websites/content. But in the PDF owners manual, the 2013+ plug change is recommended at 100K miles under "normal" conditions, 60K under "special operating" conditions. For the 2010-12, it is 90K/60K.
Quote from: curry67 on February 06, 2014, 09:45:57 PM
im super pleased with how my car is running after switching the plugs something tells me i had those stock 2010 ones still. i had some misfire problems and short instances of lose of power. now it feels alot smoother and steady power threw the rpm range. :D makes me wanna do more to tune up the car.
Glad to hear the news Curry!
Had a great drive from Phx to Tucson. The SHO really performed well and traffic was light so I put my foot in it several times. The first day of the show was interesting... My wife is spending about $100/hr... I may run out of fuel for this soon!
I did get shouldered by AZ DPS for my blacked out tails... But he let me go without any paper 'cuz he said no problems seeing brake and turn signal lights when I pulled over... That he just couldn't see them when they were off (btw just as I wanted)! Helped make it a pleasant conversation about the SHO... He was interested and actually asked me to floor it when I left! Of course I was happy to oblige! LOL
Off to Vivache' for dinner now.
A "nice" brush with the law.
Great story!
Today I ensured my wife would be unable to complain about my SHO mods for a while.... Shopped the stones... Got a mount done ... And got the stone mounting done. Modding is secure! :kissing: and valentines day is taken care of.
(http://i1331.photobucket.com/albums/w596/knot2bfound/image_zpsfb3bc198.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/image_zpsfb3bc198.jpg.html)
Atta boy my man!
Whoa! Niiiice :thumb:
Quote from: BiGMaC on February 09, 2014, 11:36:04 PM
Today I ensured my wife would be unable to complain about my SHO mods for a while.... Shopped the stones... Got a mount done ... And got the stone mounting done. Modding is secure! :kissing: and valentines day is taken care of.
(http://i1331.photobucket.com/albums/w596/knot2bfound/image_zpsfb3bc198.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/image_zpsfb3bc198.jpg.html)
WAY TO GO!!!!!! BigMaC! Great Minds think alike. last year when I upgrading to (d-pipe,x-pipe,2.5"-pipes,and METH) MODs on "THE OTHER WOMAN" (the SHO)!!!!!LOL I did the same thing for the WIFE!!!!!!!(http://www.ecoboostperformanceforum.com/gallery/55_10_02_14_2_47_08.jpeg)
Happy Valentine's Day to you and yours! May the cockles of your hearts be warm and cozy.
I got my girl down pipes. I hope she likes them!
Quote from: DJE624 on February 14, 2014, 02:11:07 AM
I got my girl down pipes. I hope she likes them!
Enjoy your Date! LOL
.... Happy Valentines Day to everyone
I got my girl a pipe too... Lol!
Sent from my iPhone using Tapatalk
Actually so did I... But I have two girls. Got the other one some old rocks. :P
Quote from: crash712us on February 14, 2014, 05:52:15 AM
I got my girl a pipe too... Lol!
Sent from my iPhone using Tapatalk
You old hound dog you! :clown:
Quote from: BiGMaC on February 14, 2014, 05:56:30 AM
Actually so did I... But I have two girls. Got the other one some old rocks. :P
"THE WIFE" is getting flowers and diner but the "THE OTHER WOMAN" will have to way. A front end Traction Control Bar (Ya That will make her happy about being 2nd/tire for 1st in my life)!!!!LOL ROTF LMBO!!!!!!
Quote from: BiGMaC on February 05, 2014, 09:44:05 AM
Quote from: SHOdded on February 05, 2014, 09:26:38 AM
Crankcase ventilation filter. If you leave it on, it dirties the intake. If you leave it off, it messes up your engine compartment. Hence this filter.
This is why 4DR suggested we develop a catch can like the one for the F150 EB.
http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26116#msg26116 (http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26116#msg26116)
http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26060#msg26060 (http://www.ecoboostperformanceforum.com/index.php?topic=1944.msg26060#msg26060)
Any word on catch can development for the SHO?
Has anyone heard of or used kspecracing? They have EBC rotors and yellow stuff pad less than 400 for the front.
Autoplicity.com is the cheapest I've seen.
Sent from my iPhone using Tapatalk
Finally warmed up its 44 degrees around these parts..... Still to cold to roll the windows down and the sunroof open. Havent opened the sunroof since I bought the car due to weather
Small Boat missions at 0330 (3:30am) AAAAAAAAAA life in the Military. Already so tired.
Quote from: futat2 on February 18, 2014, 07:11:32 PM
Small Boat missions at 0330 (3:30am) AAAAAAAAAA life in the Military. Already so tired.
DUTY CALLS ... Been There Done That ... US Army , Persian Gulf War Vet .
Quote from: SwampRat on February 18, 2014, 07:23:22 PM
Quote from: futat2 on February 18, 2014, 07:11:32 PM
Small Boat missions at 0330 (3:30am) AAAAAAAAAA life in the Military. Already so tired.
DUTY CALLS ... Been There Done That ... US Army , Persian Gulf War Vet .
I feel you. Im just counting down to retirement, my body don't handle it as good as it did 14 or so years ago. many trips to the sand box and rocky mountains can be hard on the joints. On the brighter side what I due now is actually fun. I get to mess with people in my speed boat. I do love training other people for a change.
Quote from: futat2 on February 18, 2014, 07:37:17 PM
Quote from: SwampRat on February 18, 2014, 07:23:22 PM
Quote from: futat2 on February 18, 2014, 07:11:32 PM
Small Boat missions at 0330 (3:30am) AAAAAAAAAA life in the Military. Already so tired.
DUTY CALLS ... Been There Done That ... US Army , Persian Gulf War Vet .
I feel you. Im just counting down to retirement, my body don't handle it as good as it did 14 or so years ago. many trips to the sand box and rocky mountains can be hard on the joints. On the brighter side what I due now is actually fun. I get to mess with people in my speed boat. I do love training other people for a change.
Been there to!!! Last month of Vietnam to the 1st GULF. 28yr US NAVY.
WORK ON ALL THREE OF THE BIRDs PLUS 2 not seen.
(F-14 Tomcat, A-4 Skyhawk, and A-6 Intruder) There is a A-7 and S-3 to the right out of the picture.
(http://www.ecoboostperformanceforum.com/gallery/55_11_11_13_10_29_14.jpeg)
Looking forward to a good day's sleep tomorrow. I just put up room darkening drapes! It's been a little tough transitioning to third shift. As for now, I'll start on my TStat in a while. Hopefully, I'll get the 3 Bar sensor and tune in the next couple days and Friday, I'll get the resonator put back in. That will help me sleep too!
Do you plan to do a step-by-step for the TStat, Dave? I know, I know, it's "easy", still ...
Quote from: SHOdded on February 20, 2014, 02:59:55 AM
Do you plan to do a step-by-step for the TStat, Dave? I know, I know, it's "easy", still ...
I did start a thread about it. I didn't think to take pictures until I was almost done. But, yeah, it was really easy. Even for me!
Quote from: crash712us on February 18, 2014, 01:31:06 PM
Autoplicity.com is the cheapest I've seen.
Sent from my iPhone using Tapatalk
That's actually where I ordered my EBC slotted rotors & red stuff pads from.. I paid 570 for front and rear with 2 day shipping.
tux:
that's a good deal for sure. I know I paid more for mine early last year. Love the EBC's, have same slotted w/ red stuff pads. the big girl can stop on a dime with them & not too much dust but oddly more on rear wheels than front.
mikev
Rear brakes seem to wear out quicker on the Edge as well.
Based on the activity here tonight folks must be as tired as I am this week.... C'mon FridayPM!
Sorry about your Monday Dave.
I cant wait to get this from UPS..
(http://i1210.photobucket.com/albums/cc404/tomc612/untitled2_zpsd4d0db85.jpg)
Quote from: Tomc612 on February 26, 2014, 07:29:25 PM
I cant wait to get this from UPS..
(http://i1210.photobucket.com/albums/cc404/tomc612/untitled2_zpsd4d0db85.jpg)
WOW that BIG news I think , MobSteel back in the game ! !
Going to paint it myself ,I don't think mobsteel makes the grilles anymore and sold the molds to TommyZDesign. The mobsteel grille really grew on me . I'm going to paint it bumper black.
Quote from: Tomc612 on February 26, 2014, 07:51:03 PM
Going to paint myself ,I don't think mobsteel makes the grilles anymore and sold the molds to TommyZDesign. The mobsteel grille really grew on me and going to paint black..
The point is that it can be had .. lots of folks out there looking for a good aftermarket grille
Quote from: SwampRat on February 26, 2014, 08:17:04 PM
The point is that it can be had .. lots of folks out there looking for a good aftermarket grille
Kevin... Great research and find!
Please post about the quality, fitment, and what is required as far as R&R for the install (bet it's the whole front clip)....TIA
The pics on the site are what I'm looking for... Did they offer other finishes... I was thinking about black chrome or just black.
Quote from: BiGMaC on February 26, 2014, 09:01:44 PM
Quote from: SwampRat on February 26, 2014, 08:17:04 PM
The point is that it can be had .. lots of folks out there looking for a good aftermarket grille
Kevin... Great research and find!
Please post about the quality, fitment, and what is required as far as R&R for the install (bet it's the whole front clip)....TIA
The pics on the site are what I'm looking for... Did they offer other finishes... I was thinking about black chrome or just black.
Tomc612 actually ordered the grille from them and it seems to not be completely finished and he is painting his black .
Would they (Tommy Z Design) happen to have molds for the 13+ cars?
Quote from: SHOmanMike84 on February 27, 2014, 08:21:02 PM
Would they (Tommy Z Design) happen to have molds for the 13+ cars?
web site doesn't tell you much ... everything LOOKS Slick ... call em and ask 616-301-5105
Grandson born this afternoon Essiah , 6lbs 12 oz
(http://i1287.photobucket.com/albums/a628/kbeck59/DSC00278_zps909c3de6.jpg) (http://s1287.photobucket.com/user/kbeck59/media/DSC00278_zps909c3de6.jpg.html)
Stopped playing with My Toy ... Some things are more important ...
Congratulations!
Congratulations!!! and thanks for sharing the moment!
Quote from: SwampRat on February 27, 2014, 11:14:52 PM
Grandson born this afternoon Essiah , 6lbs 12 oz
Nah, you just got a fancier toy!!! Congrats, bigtime, to you and the parents :D
congrats SwampRat!
i never would have guessed you were a grandfather :)
with your bad-ass SHO and all...
Congrats, that is great!
Congrats Swamprat.
So I gave Tommy Z Design a call and Mr. Tommy himself answered. Tommy in fact does have grilles available for the 2013+ Taurus'.
Tommy uses the police interceptor style grille and cuts out the existing mesh, he'll add either a stainless mesh or black powder coated mesh- with or without the oval. As well as a matching lower grille.
He does offer to have the grille surround factory paint matched.
Good news for us 2013+ cars looking for grille options.
After the big rain storm in Phoenix last Saturday my land line phone was funky and the internet connection was inoperable... currently patched using my cell phone as a modem. After 2 reps and 2 1/2 hours on the phone my ISP decided there was a problem with their lines... :homer:
So they are sending a repair tech to get it fixed this afternoon... As soon as it's back up with some speed I'll get the hotpipes install pics (about 60 or so) and tips posted.
swamp-congrads. all i know is your sho has plenty of room in back seat for car seat. & when he starts crying take him for a quick wot run & he'll be either too scared to cry or will smile, then you know you got a partner down the road & to tom i said there's atleast 3 of us pushing 70 real hard, so even with one foot in the grave the other is doing a wot!!!!!!!!!!
Quote from: mval on March 03, 2014, 10:37:16 AM
there's atleast 3 of us pushing 70 real hard, so even with one foot in the grave the other is doing a wot!!!!!!!!!!
Mike.... I still go WOT because I stopped recognizing my birthday about 40 years ago... 21 forever at max boost!! :holdbreath:
Just keep a wide gap between WOT and 6FTUNDR!
I love my tint guy buddy! He re-did my PPE stickers on the windshield for me.
Now, I am going to bed.
Dealer is about to pick up my ride. FML! Yesterday i was driving to work and my car started to act wierd when i got on base. The car started to stutter, bellow white smoke that smelled like straight gas. No idea what it is. I got 2 codes which were P00C6 and P0302. Fuel rail pressure too low engine cranking and cylinder 2 misfire. Ill find out later exactly what it is.
what year? let us know what they find.
Another case of hydrolock? I hope not, fingers crossed. We had a case a few months ago where someone had their fuel injector fail and cause fuel to be dumped into the engine & everything downstream, destroying their aftermarket cats.
Did you resolve the starting problems you were seeing earlier?
I didnt hear anything from the dealer as of yet. It starts fine most of the time but in a few cases it would start and stutter for half a second then it would be ok. Other times i will leave it idling for 5 min and i would put it in drive and it would hesitate as if there was no fuel. Then it would proceed to catch up i guess and would be fine after that. Just my luck with FORD. My second FORD since my 95 f150 reg cab long bed staright six. Tranny went out in that. I have always been a GM man and figure wth... why not?
Now that i think aboit it... my starting and idleing issues might be from that injector being fouled/ stuck open. WTF! Sorry 4dr for my lack of sensorship.
I think we should take up a collection and hire a software engineer to construct a virus we could load on our ECUs that would prevent the Ford ODB2 reader from seeing or at least from reporting tunes and the record of flashes associated with them including the ghosts....... Gotta dream big!
I wonder if anybody is looking for a used Typhoon. Maybe I'll list it later and find out.
<---this guy is interested in the typhoon intake. Pm sent. Im really looking for a wrinkle black injen cai for the explorer sport. I dig the lookof that on my SHO. But hey beggers cant be choosers.
Quote from: SHO n GO on March 06, 2014, 09:30:14 AM
<---this guy is interested in the typhoon intake. Pm sent. Im really looking for a wrinkle black injen cai for the explorer sport. I dig the lookof that on my SHO. But hey beggers cant be choosers.
PM returned.
Quote from: DJE624 on March 06, 2014, 04:00:26 AM
I wonder if anybody is looking for a used Typhoon. Maybe I'll list it later and find out.
Not wondering anymore. Thanks SHO n GO!
No thank you! Talk about a quick sell haha didnt even have to post in the classifieds.
Found this today
Quote from: panther427 on March 07, 2014, 01:31:16 PM
Found this today
Please state your intentions with this newfound fuel :)
How your employer uses daylight savings time to get af free hour of work... left click to enlarge.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/ThoughtsonDaylightsavingsTime_zps48f4b6ea.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/ThoughtsonDaylightsavingsTime_zps48f4b6ea.jpg.html)
Quote from: SHOdded on March 07, 2014, 02:36:00 PM
Quote from: panther427 on March 07, 2014, 01:31:16 PM
Found this today
Please state your intentions with this newfound fuel :)
I believe a new tune is mandatory... time to email torrie 😃
Yep.. injector failed and blew out the plugs. Under warranty yay. Hopefully this wull end the stupid idle miss and rough start up. Time to change the thermostat and retune.
Quote from: FO SHO on March 07, 2014, 07:49:32 PM
Yep.. injector failed and blew out the plugs. Under warranty yay. Hopefully this wull end the stupid idle miss and rough start up. Time to change the thermostat and retune.
Bummer... but at least you found it! and the repair is free!
Got to keep tabs on this injector failure phenomenon, relatively new, and hopefully rare. Any idea why it failed?
Also Found this
http://www.carid.com/2013-ford-taurus-grill/eg-classics-grilles-475652.html?CAWELAID=120121000004536472&cagpspn=pla&gclid=CJ_DlqCmgr0CFUVgMgod0HQAqQ (http://www.carid.com/2013-ford-taurus-grill/eg-classics-grilles-475652.html?CAWELAID=120121000004536472&cagpspn=pla&gclid=CJ_DlqCmgr0CFUVgMgod0HQAqQ)
I only have a seven hour shift tonight. Should be a good hump day for me!
can someone lead me to where is says the different stages for livernois tunes?
This was the last "official" thread that I saw, info may not be the most up-to-date tho.
http://www.ecoboostperformanceforum.com/index.php?topic=691.0 (http://www.ecoboostperformanceforum.com/index.php?topic=691.0)
? what thread?
Quote from: explorergotoluvit on March 11, 2014, 12:21:18 AM
? what thread?
Trying to match the speed of the new server :D Updated original post.
thanks
does anyone have power numbers with the different stages?
Quote from: explorergotoluvit on March 11, 2014, 12:11:19 AM
can someone lead me to where is says the different stages for livernois tunes?
For 2013+ 3.5EBs LMS has 91 and 93 octane tunes... no stages... They state it is most like the 4+ tune used in the 2010-2012 models. Go to the LMS site... click on tuning...and options... the page explains... you don't have to put it in your basket.
Going to get back into auto detailing for the Spring and Summer while I look for a suitable job. This third shift job I'm at now is for the birds. Really looking forward to having a great Summer!
how long does it take for liver to send a map out when you send them your numbers?
Quote from: DJE624 on March 14, 2014, 09:22:54 PM
Going to get back into auto detailing for the Spring and Summer while I look for a suitable job. This third shift job I'm at now is for the birds. Really looking forward to having a great Summer!
Excellent plan Dave!
Quote from: explorergotoluvit on March 14, 2014, 09:40:07 PM
how long does it take for liver to send a map out when you send them your numbers?
A day or two. Sometimes sooner. Just depends when you catch them. One time, they had over 60 tunes waiting to go out. But, whatever the wait is, to me it is well worth it!
Took the day off today and went skiing with my son. He didn't have school because it was some type of in service day for teachers. Great day.
Quote from: TSS on March 14, 2014, 09:55:37 PM
Took the day off today and went skiing with my son. He didn't have school because it was some type of in service day for teachers. Great day.
Any pics of you guys ripping and tearing on the mountain?
Quote from: DJE624 on March 14, 2014, 09:22:54 PM
Going to get back into auto detailing for the Spring and Summer while I look for a suitable job. This third shift job I'm at now is for the birds. Really looking forward to having a great Summer!
Sorry to hear about your current job, Dave! But if you can make a go at it with auto detailing, why not??? Good luck :)
Last week. Wifey on skis in 19 years. Back on hill in 6 years. Hip replacement & used to snowboard. Yea she's 28 !
eH
Another day in paradise...
This morning at 6 AM, sunrise on the wife's F250 (click to enlarge)
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/photo1_zps2b1b677b.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/photo1_zps2b1b677b.jpg.html)
Quote from: BiGMaC on March 14, 2014, 10:35:44 PM
Quote from: TSS on March 14, 2014, 09:55:37 PM
Took the day off today and went skiing with my son. He didn't have school because it was some type of in service day for teachers. Great day.
Any pics of you guys ripping and tearing on the mountain?
No, did not take any. I also decided to try a ski jump for the first time. Turns out, not a great thing to try for the first time at age 45. It was ugly. I lost a ski, a pole, and my hat. No pain at the time - and I continued to ski for another couple of hours and had a great time. The next day though, it felt like I had been in a minor to moderate automobile accident. Almost back to normal today. WISH I had a video - it was epic.
Quote from: TSS on March 17, 2014, 10:01:11 AM
Quote from: BiGMaC on March 14, 2014, 10:35:44 PM
Quote from: TSS on March 14, 2014, 09:55:37 PM
Took the day off today and went skiing with my son. He didn't have school because it was some type of in service day for teachers. Great day.
Any pics of you guys ripping and tearing on the mountain?
No, did not take any. I also decided to try a ski jump for the first time. Turns out, not a great thing to try for the first time at age 45. It was ugly. I lost a ski, a pole, and my hat. No pain at the time - and I continued to ski for another couple of hours and had a great time. The next day though, it felt like I had been in a minor to moderate automobile accident. Almost back to normal today. WISH I had a video - it was epic.
LOL.... I tried it first at age 58 snowboarding.... You'd think I'd have more sense! :boom: fortunately on the bunny slope practice area at Sunrise... sounds like a similar outcome! :P
Quote from: BiGMaC on March 17, 2014, 09:32:10 AM
Another day in paradise...
This morning at 6 AM, sunrise on the wife's F250 (click to enlarge)
Nice! Hope to see a sunrise at some point this year around here :D
Tom:
Go ahead & rub it in. Was 20 this morning in STL. But will fondly think of you in July or August & those beautiful sunrises when you can cook your breakfast on the sidewalks!!!!!!!!!!!!!!!!!! by the way TSS had same experience as Tom on skiing, in fact missed up my knee some right at the place Dave now works at & haven't done it since.
mikev
Quote from: mval on March 17, 2014, 12:16:03 PM
Tom:
Go ahead & rub it in. Was 20 this morning in STL. But will fondly think of you in July or August & those beautiful sunrises when you can cook your breakfast on the sidewalks!!!!!!!!!!!!!!!!!!
mikev
LOL... Too true!... But at least it saves on my natural gas bill and keeps the kitchen clean :P
[/quote]
LOL.... I tried it first at age 58 snowboarding.... You'd think I'd have more sense! :boom: fortunately on the bunny slope practice area at Sunrise... sounds like a similar outcome! :P
[/quote]
Thats funny, the first and last time I tried to snowboard was at the Sunrise bunny slopes. Then a buddy talked me into trying the black slope. Long story short, I flipped down the mountain. Only broke my new board and no bones. Guess I was more flexible 23 years ago. Decided that day to stick with my skate boards in Phoenix.
Yesterday on the way home from work I saw a GT40... red with white striping... pristine! Spent my time maneuvering around him for a good look and listening to that power plant... couldn't get a pic (darn) and had enough sense not to challenge him. Really sweet REAL Ford GT!
That is one COOL sighting, Tom!
Quote from: BiGMaC on March 19, 2014, 06:02:50 PM
Yesterday on the way home from work I saw a GT40... red with white striping... pristine! Spent my time maneuvering around him for a good look and listening to that power plant... couldn't get a pic (darn) and had enough sense not to challenge him. Really sweet REAL Ford GT!
Sweet ride for sure , But I really like the 2005/06 Ford GT.
http://www.edmunds.com/ford/gt/2005/ (http://www.edmunds.com/ford/gt/2005/)
Quote from: SwampRat on March 19, 2014, 06:46:05 PM
Quote from: BiGMaC on March 19, 2014, 06:02:50 PM
Yesterday on the way home from work I saw a GT40... red with white striping... pristine! Spent my time maneuvering around him for a good look and listening to that power plant... couldn't get a pic (darn) and had enough sense not to challenge him. Really sweet REAL Ford GT!
Sweet ride for sure , But I really like the 2005/06 Ford GT.
http://www.edmunds.com/ford/gt/2005/ (http://www.edmunds.com/ford/gt/2005/)
That's the one I want!
Love the styling.
Agree with the more power versions. The car had a long history after Ford decided it wanted to beat Ferrari at it's own game.
Heres's a '69. pretty much the same body styling throughout. The one I saw literally had this much rear rubber.
http://gt40.net/1969-ford-gt40-red-motortrend-wot/ (http://gt40.net/1969-ford-gt40-red-motortrend-wot/) click the pics that come up
Quote from: SHOdded on March 19, 2014, 07:01:19 PM
Love the styling.
Ford needs to bring it back , we need a Vette / Viper Killer .
Quote from: SwampRat on March 19, 2014, 07:25:29 PM
Quote from: SHOdded on March 19, 2014, 07:01:19 PM
Love the styling.
Ford needs to bring it back , we need a Vette / Viper Killer .
Why Not let it be the Gen 7 SHO?
Quote from: BiGMaC on March 19, 2014, 07:28:08 PM
Quote from: SwampRat on March 19, 2014, 07:25:29 PM
Quote from: SHOdded on March 19, 2014, 07:01:19 PM
Love the styling.
Ford needs to bring it back , we need a Vette / Viper Killer .
Why Not let it be the Gen 7 SHO?
You mean Fords ball bustin budget version of the Porsche Panamera ?
+1 the last three posts!
I am going to dream about this one. Check out "my" wheels. :clown:
(http://i1059.photobucket.com/albums/t440/DJE624/fpv_gt_feb2008_zps80a8e795.jpg)
Quote from: DJE624 on March 20, 2014, 07:27:26 AM
I am going to dream about this one. Check out "my" wheels. :clown:
(http://i1059.photobucket.com/albums/t440/DJE624/fpv_gt_feb2008_zps80a8e795.jpg)
Definitely your wheels looking good on that Taurostang! ;D
Quote from: DJE624 on March 20, 2014, 07:27:26 AM
I am going to dream about this one. Check out "my" wheels. :clown:
(http://i1059.photobucket.com/albums/t440/DJE624/fpv_gt_feb2008_zps80a8e795.jpg)
Oh my....
Quote from: BiGMaC on March 25, 2014, 01:42:58 PM
Here's a thing called CarPlay. No selling, no fanboy , and please no debate on the old Apple vs PC crap please. It's just info... and Ford is committed. It's just news in all the tech mags/sites.
This could put a multitude of apps on the touch screen in your ride even though they live in your phone or tablet.... no necessity for more mounted hardware. Very cool idea...
http://www.apple.com/ios/carplay/ (http://www.apple.com/ios/carplay/)
Cool idea yes..... apple vs pc debate = crap ? Thats your opinion .
All personal use computers are pc's and what differentiates them TODAY is YOUR OS choice .
The top tier mfg's use the same high quality components be it Apple or the Boutique Winows based computers and tech support is on par as well.
not a random thought but a random picture. I love this thing. 6-speed with clutch.
(http://i285.photobucket.com/albums/ll62/mclspllc/Mobile%20Uploads/20140324_193305_zps85d87c9d.jpg) (http://s285.photobucket.com/user/mclspllc/media/Mobile%20Uploads/20140324_193305_zps85d87c9d.jpg.html)
Quote from: TSS on March 25, 2014, 08:26:44 PM
not a random thought but a random picture. I love this thing. 6-speed with clutch.
(http://i285.photobucket.com/albums/ll62/mclspllc/Mobile%20Uploads/20140324_193305_zps85d87c9d.jpg) (http://s285.photobucket.com/user/mclspllc/media/Mobile%20Uploads/20140324_193305_zps85d87c9d.jpg.html)
I'm a first person game freak myself! Love it!
You are going to crash right in to the Fox News studio!
Finally, the chance to virtually drive a John Stewart-Mobile around town via recumbent exercycle! And they said this day would never come.
Saw a stock gold leaf MKS (10-12?) last evening, not sure it was EB, but those wheels sure look good, even more so when rolling!
I saw a bone stock ruby red 2012 SHO pull up beside me and then turn into my
" favorite " WalMart this morning .
Hell , the windows weren't even tinted and sitting up front were 2 elderly white haired ladies in their late 70's or better .....
Quote from: SwampRat on April 12, 2014, 12:42:10 AM
I saw a bone stock ruby red 2012 SHO pull up beside me and then turn into my
" favorite " WalMart this morning .
Hell , the windows weren't even tinted and sitting up front were 2 elderly white haired ladies in their late 70's or better .....
looks like a sales-person did pretty well off them.
or maybe they knew exactly what they wanted :-
Quote from: DRII on April 12, 2014, 09:25:43 AM
Quote from: SwampRat on April 12, 2014, 12:42:10 AM
I saw a bone stock ruby red 2012 SHO pull up beside me and then turn into my
" favorite " WalMart this morning .
Hell , the windows weren't even tinted and sitting up front were 2 elderly white haired ladies in their late 70's or better .....
looks like a sales-person did pretty well off them.
or maybe they knew exactly what they wanted :-
I'm old enough to remember a the refrain of popular Jan and Dean song (also performed by the Beach Boys...
The Little Old Lady from Pasadena.... "go granny, go granny, go granny go!"
(http://i1287.photobucket.com/albums/a628/kbeck59/tmp_58c8eb198ac188e0546e33f96d974487-1913926053_zpsfec8efcd.jpg) (http://s1287.photobucket.com/user/kbeck59/media/tmp_58c8eb198ac188e0546e33f96d974487-1913926053_zpsfec8efcd.jpg.html)
http://abcnews.go.com/US/video/cops-chase-donut-truck-alleged-heist-18490252 (http://abcnews.go.com/US/video/cops-chase-donut-truck-alleged-heist-18490252)
that is epic :minigunner:
Quote from: panther427 on April 13, 2014, 03:25:47 PM
that is epic :minigunner:
http://youtu.be/WAExnkOcIJA (http://youtu.be/WAExnkOcIJA)
Quote from: JimiJak on April 18, 2014, 05:25:52 AM
Quote from: panther427 on April 13, 2014, 03:25:47 PM
that is epic :minigunner:
http://youtu.be/WAExnkOcIJA (http://youtu.be/WAExnkOcIJA)
that's just wrong ...A Peep KILLER ! !
Happy Easter To All!
/` /`/
/ V //
/6 6
(= Y =)
/`"^ "`
/ /
(_/ .' ' .\_)
/ ; ; o
___ '-. -'/___
(((____/^\____)))
Here's a link to an article in today's Forbes Magazine... a bit long, but much understanding... worth the read... poor quality control among other issues is discussed.......... It seems that any reduction in greenhouse gasses gained from ethanol use in the combustion engine is eclipsed by those created from it's production.
here's one quote:
"In 2014, the U.S. will use almost 5 billion bushels of corn to produce over 13 billion gallons of ethanol fuel. The grain required to fill a 25-gallon gas tank with ethanol can feed one person for a year, so the amount of corn used to make that 13 billion gallons of ethanol will not feed the almost 500 million people it was feeding in 2000. This is the entire population of the Western Hemisphere outside of the United States."
www.forbes.com/sites/jamesconca/2014/04/20/its-final-corn-ethanol-is-of-no-use/ (http://www.forbes.com/sites/jamesconca/2014/04/20/its-final-corn-ethanol-is-of-no-use/)
Quote from: BiGMaC on April 21, 2014, 10:18:40 PM
Here's a link to an article in today's Forbes Magazine... a bit long, but much understanding... worth the read... poor quality control among other issues is discussed.......... It seems that any reduction in greenhouse gasses gained from ethanol use in the combustion engine is eclipsed by those created from it's production.
here's one quote:
"In 2014, the U.S. will use almost 5 billion bushels of corn to produce over 13 billion gallons of ethanol fuel. The grain required to fill a 25-gallon gas tank with ethanol can feed one person for a year, so the amount of corn used to make that 13 billion gallons of ethanol will not feed the almost 500 million people it was feeding in 2000. This is the entire population of the Western Hemisphere outside of the United States."
www.forbes.com/sites/jamesconca/2014/04/20/its-final-corn-ethanol-is-of-no-use/ (http://www.forbes.com/sites/jamesconca/2014/04/20/its-final-corn-ethanol-is-of-no-use/)
Wonder if that means a spike in prices due to this for consumable corn.....being a mid-westerner I do love my corn
Happy Birthday Mike... Many happy returns of the day! (but not eco part returns!, LOL)
Quote from: BiGMaC on May 01, 2014, 11:28:40 AM
Happy Birthday Mike... Many happy returns of the day! (but not eco part returns!, LOL)
ditto ...
Quote from: BiGMaC on April 21, 2014, 10:18:40 PM
Here's a link to an article in today's Forbes Magazine... a bit long, but much understanding... worth the read... poor quality control among other issues is discussed.......... It seems that any reduction in greenhouse gasses gained from ethanol use in the combustion engine is eclipsed by those created from it's production.
here's one quote:
"In 2014, the U.S. will use almost 5 billion bushels of corn to produce over 13 billion gallons of ethanol fuel. The grain required to fill a 25-gallon gas tank with ethanol can feed one person for a year, so the amount of corn used to make that 13 billion gallons of ethanol will not feed the almost 500 million people it was feeding in 2000. This is the entire population of the Western Hemisphere outside of the United States."
www.forbes.com/sites/jamesconca/2014/04/20/its-final-corn-ethanol-is-of-no-use/ (http://www.forbes.com/sites/jamesconca/2014/04/20/its-final-corn-ethanol-is-of-no-use/)
This is a valid concern of E-85.
With tech advances you may see it moving from corn to pretty much any cellulose plant material, wood, etc.
Hemp anyone?
Short term pain for long term gain.
https://en.wikipedia.org/wiki/Cellulosic_ethanol (https://en.wikipedia.org/wiki/Cellulosic_ethanol)
Today is National Peace Officer's Day.
Thanks to bpd1151... :bigthanx:
and apologies to anyone I left out due to my ignorance... We can sleep at night because of you guys!
Boost?
Smile I won the race no problem lol
Yesterday I installed an experimental update Anthony at LMS sent me. It's based on the 4+ tune I've been running since it came out. I'm really happy to say it's a very positive update. So far I have no hard numbers but based on the good old "butt dyno" it's noticeably stronger. I have felt no loss of the good manners the car has always had. Throttle response, low end torque, and strong pull throughout the RPM range all feel noticeably improved. I'm impressed with this tune so if you are running 4+, email Anthony and get your update ASAP. You won't be sorry! I am running the 3BAR MAP and I don't know how much that has to do with what I'm feeling, but 2 BAR or 3 BAR, give this bad boy a try.
Quote from: Larrylu on May 29, 2014, 09:48:40 PM
Yesterday I installed an experimental update Anthony at LMS sent me. It's based on the 4+ tune I've been running since it came out. I'm really happy to say it's a very positive update. So far I have no hard numbers but based on the good old "butt dyno" it's noticeably stronger. I have felt no loss of the good manners the car has always had. Throttle response, low end torque, and strong pull throughout the RPM range all feel noticeably improved. I'm impressed with this tune so if you are running 4+, email Anthony and get your update ASAP. You won't be sorry! I am running the 3BAR MAP and I don't know how much that has to do with what I'm feeling, but 2 BAR or 3 BAR, give this bad boy a try.
Thanks for the info , will be emailing Anthony right now !
Sent from my SM-N900T using Tapatalk
Good to hear, Larry! Do you know if this update applies to both the Gen IV & V's or only the Gen IV?
Quote from: BiGMaC on May 15, 2014, 10:13:28 AM
Today is National Peace Officer's Day.
Thanks to bpd1151... :bigthanx:
and apologies to anyone I left out due to my ignorance... We can sleep at night because of you guys!
Thank you. Truly much appreciated.
Been a busy few weeks now that the weather's warmed up.
There are many that serve that keep us all collectively safe. My hat's off to everyone.
Quote from: SHOdded on May 29, 2014, 11:00:11 PM
Good to hear, Larry! Do you know if this update applies to both the Gen IV & V's or only the Gen IV?
This update is for '10 through '12. This is a quote from Anthony:
"This is an overall improved version of the tune you were running previously with more boost as well. Better shift points , firmness, throttle response, and higher boost levels for the 3 bar map as well."
What's not to like? I've heard they may give it a new name!
I think I have an addiction. I purposely park my car in visible sight of the break area at work so when I take a break I can look at it.....
Sent from my XT1080 using Tapatalk
Quote from: Txstrmhntr on June 05, 2014, 01:04:40 PM
I think I have an addiction. I purposely park my car in visible sight of the break area at work so when I take a break I can look at it.....
Sent from my XT1080 using Tapatalk
You too?
LOL!
New Law
http://autos.aol.com/article/illinois-bans-traffic-ticket-quotas/?icid=maing-grid7%7Cresponsive%7Cdl5%7Csec3_lnk4%26pLid%3D489400 (http://autos.aol.com/article/illinois-bans-traffic-ticket-quotas/?icid=maing-grid7%7Cresponsive%7Cdl5%7Csec3_lnk4%26pLid%3D489400)
Why there were ever quotas in the first place is confounding. Muddies the waters where the mission of law enforcement is concerned. Don't cops have enough to do without having to worry about something like this?
A mini van to be proud of.. and we seriously need a bigger fuel pump.
http://www.superstreetonline.com/featuredvehicles/1407_bisimoto_2014_honda_odyssey_ex/?eml=857403&sp_rid=4849785 (http://www.superstreetonline.com/featuredvehicles/1407_bisimoto_2014_honda_odyssey_ex/?eml=857403&sp_rid=4849785)
Note that the automatic transmission was dismissed in favor of a 6-speed, probably due to cost & reliability reasons.
Love the giant inter cooler
Almost fainted when I saw a (rare sighting) Gen IV SHO (black, stock wheels) at the local farm. Didn't get to know/chat with the owner tho :( Need to keep some EBPF cards handy :D
Quote from: SHOdded on July 03, 2014, 04:52:16 PM
Almost fainted when I saw a (rare sighting) Gen IV SHO (black, stock wheels) at the local farm. Didn't get to know/chat with the owner tho :( Need to keep some EBPF cards handy :D
No pics.......>:(
I know, right? The SHO hadn't been cleaned recently, so I didn't want to (potentially) embarass the owner. Plus there was enough foot & vehicular traffic keeping me distracted (late afternoon, plenty of tykes running about).
Joined the cracked windshield clan today :-(
Quote from: panther427 on July 06, 2014, 12:18:22 AM
Joined the cracked windshield clan today :-(
What happened???
Quote from: panther427 on July 06, 2014, 12:18:22 AM
Joined the cracked windshield clan today :-(
I feel your pain.
I got a small chip in the lower passenger side corner on my way back from vacation. Definitely need to get that fixed before it cracks/spreads.
I think the rock bounced off the hood, I have a small scratch that lines right up with it.
When you get your windshield replaced try to stay with the ford OEM sound screen glass.
I had a bad experience with guardian brand glass.
Quote from: SHOdded on July 06, 2014, 12:34:35 AM
Quote from: panther427 on July 06, 2014, 12:18:22 AM
Joined the cracked windshield clan today :-(
What happened???
Not sure. When I washed the car the other day I found a chip at the very top Center. But it had chipped out the top above the adhesive line. This crack starts about 6 inches to the passenger side of that run down the windshield vertically about 8 inches then y's out across the glass :-( no star or large chip that I could see.
The wife was driving it. Parked it outside for a bit...couple hours I guess and when she came out there was this crack!? !?!?
I feel your pain! I washed my 2013 SHO yesterday and when I was drying it I noticed the windshield was cracked. WTF? It started at the top and spreads out kinda like an upside down Y pattern. There are no chips in the glass like a stone hit it or anything like that. Very strange???
Beginning to sound more and more like defective glass or install to me.
Random picture time! (http://img.tapatalk.com/d/14/07/11/me6a7ahy.jpg)(http://img.tapatalk.com/d/14/07/11/guzubu3a.jpg)(http://img.tapatalk.com/d/14/07/11/zy3epesu.jpg)(http://img.tapatalk.com/d/14/07/11/u9e6uzup.jpg)(http://img.tapatalk.com/d/14/07/11/areve4yg.jpg)(http://img.tapatalk.com/d/14/07/11/umata4um.jpg)
(http://img.tapatalk.com/d/14/07/11/7yqutede.jpg)(http://img.tapatalk.com/d/14/07/11/ra4yja8e.jpg)(http://img.tapatalk.com/d/14/07/11/u9u8emu4.jpg)(http://img.tapatalk.com/d/14/07/11/mymy4aje.jpg)
Always loved pics of lightning (the real thing :) )! How did you fit the 302 in the SHO engine bay???
Finished fixing a broken arm and diffuser on this thing today. Have to finish clean up for show and 3 others going,
Quote from: SHOdded on July 10, 2014, 06:23:41 PM
Always loved pics of lightning (the real thing :) )! How did you fit the 302 in the SHO engine bay???
Yeah last night we had an incredible storm. Managed to get some nice pictures. As for the 302 it took a very large shoe horn haha.
Why it pays to keep up with service advisories:
http://www.revbase.com/BBBMOTOR/TSb/DownloadPdf?id=183121 (http://www.revbase.com/BBBMOTOR/TSb/DownloadPdf?id=183121)
*** 13T01
Demonstration/Delivery Hold 2013-2014 Model Year Edge, Explorer, And Taurus Vehicles Waterpump Weep Hole Blockage Product Enhancement
Certain vehicles Built Oct 2, 2013-Oct 9, 2013
Have this issue checked for also while at the dealer. etis.ford.com + VIN can get you your build date if you don't find it on any stickers on the vehicle's body.
(http://img.tapatalk.com/d/14/07/13/vy5a4agy.jpg)
Quick! Get to the hospital! Oh wait... still charging.
12hr work day........time to go to sleep!!
Quote from: wasinger3000 on July 13, 2014, 03:51:55 AM
(http://img.tapatalk.com/d/14/07/13/vy5a4agy.jpg)
Quick! Get to the hospital! Oh wait... still charging.
Unplug it
Quote from: Silkysmooth02 on July 16, 2014, 12:08:12 AM
12hr work day........time to go to sleep!!
Night night keep yo butt hole tight
Quote from: ford4thot on July 16, 2014, 12:09:46 AM
Quote from: wasinger3000 on July 13, 2014, 03:51:55 AM
(http://img.tapatalk.com/d/14/07/13/vy5a4agy.jpg)
Quick! Get to the hospital! Oh wait... still charging.
Unplug it
Damn!! Why didn't I think of that! Haha
Quote from: wasinger3000 on July 16, 2014, 12:15:38 AM
Quote from: ford4thot on July 16, 2014, 12:09:46 AM
Quote from: wasinger3000 on July 13, 2014, 03:51:55 AM
(http://img.tapatalk.com/d/14/07/13/vy5a4agy.jpg)
Quick! Get to the hospital! Oh wait... still charging.
Unplug it
Damn!! Why didn't I think of that! Haha
I'd never do it now, 5 years ago.....yes!
As I find myself parking away from all other cars deep in parking lots, and at times being forced into the herd...a thought of a door ding bar that maybe extends out to attach from wheel well to wheel well with rubber support bar in middle....hmmm
I ran into the new electric Caddy, not really feeling it.
Sent from my iPhone using Tapatalk
Quote from: ShoBoat on July 17, 2014, 02:06:43 PM
I ran into the new electric Caddy, not really feeling it.
Sent from my iPhone using Tapatalk
Well if you ran into it you should of felt something.... hah
Quote from: wasinger3000 on July 17, 2014, 02:55:03 PM
Quote from: ShoBoat on July 17, 2014, 02:06:43 PM
I ran into the new electric Caddy, not really feeling it.
Sent from my iPhone using Tapatalk
Well if you ran into it you should of felt something.... hah
haha
Sent from my iPhone using Tapatalk
What do you guys think of this exhaust sound?
https://www.youtube.com/watch?v=jrDYcAuiEyw (https://www.youtube.com/watch?v=jrDYcAuiEyw)
Placed order for 3 parts Wednesday. Shipping notices yesterday.all parts being shipped from east cost. New York Pennsylvania and Florida. One part each shipped by a different carrier. Ups fedex and usps.
But I'm to get one part on Monday Tuesday and Wednesday.
Very random.
Hopefully they all deliver quicker than expected. I know with Fedex, estimated delivery date has been way off. UPS comes closest to accurate.
If I could only zip through the phone lines and drop into that customer service room of comcast....pleeeeeeaase. ..10 minutes that's all...
I'm afraid we can't let you do that, sir! Please step back ...
Ahhhhhh, is all I can say. Hour and a half to disconnect service. ..we were being charged $226 a month (no pay channels). At very end they offer me $119 a month...lol...if you can handle talking to a complete moron for that long you too can score a deal...me, I laughed(hysterically) and asked why they care now...
Sadly, never had luck with Comcast either.
Anyone know if it's possible to change the ambient lighting color when you open the door?
Correct me if i am wrong,i know the non PP have it,you control the feature with the steering wheel function,i know the button by the headlight switch is the insrument cluster dim switch i recall it having several colors,oooo.haaa
While doors are open the color change button does not work here either.
Saw a pre production Challenger Hellcat
(http://img.tapatalk.com/d/14/07/20/yrupe3et.jpg)
Ahhh...first time it's been rained on in 2 months
Quote from: panther427 on July 18, 2014, 11:26:47 AM
Placed order for 3 parts Wednesday. Shipping notices yesterday.all parts being shipped from east cost. New York Pennsylvania and Florida. One part each shipped by a different carrier. Ups fedex and usps.
But I'm to get one part on Monday Tuesday and Wednesday.
Very random.
United states postal service wins the race. I was just informed my new 3 bar boost sensor arrived today from rock auto. Assuming I got the right one of course.
Nice, I passed up paying the extra money for 3 day on obdlink order and usps got here in 2 for free!!!
So this is the kind of local dealership I have. This is a used MKS on the lot that they have on the front row with a Ballon and everything lol. (http://img.tapatalk.com/d/14/07/21/y3urasup.jpg)
Don't mind the trim half way torn off.
So the tesla model s and benz s550 both weigh more than the sho... so that's comforting.
Is that the optional winged trim mod
Maybe it's a transformer?
Hah. Trim must be listed as optional.
Day off, family went to the zoo (again), think it's a golf day!!!
About to wash the truck and I see this
(http://img.tapatalk.com/d/14/07/25/yvygynam.jpg)
Is that a key job?#&/#!!#/
Oh man...that sucks.
Quote from: ecoboostsho on July 24, 2014, 08:32:05 PM
Oh man...that sucks.
She's far from perfect condition with a 155k on her. But really, drivers door too, some people are just a - holes.
Quote from: SHOnUup on July 24, 2014, 09:00:25 PM
Quote from: ecoboostsho on July 24, 2014, 08:32:05 PM
Oh man...that sucks.
She's far from perfect condition with a 155k on her. But really, drivers door too, some people are just a - holes.
Makes me re-think the idea of an electrified body alarm system. That would discourage this kind of BS. Just a little jolt would do it maybe 10k volts ;)
Sent from my iPhone using Tapatalk
Sign me up>:( go pro cam remote wired to the setup so you get to watch it too!!!
So sorry to see this, totally uncalled for!
Quote from: SHOdded on July 25, 2014, 01:30:15 AM
So sorry to see this, totally uncalled for!
Thx...my OCD kicked in as I took the Polish to door, 2 hours later entire truck done...05 ext. trailblazer is alot of truck
(http://img.tapatalk.com/d/14/07/26/y5utabut.jpg)
Little night time charity work for buddies mom.
Nice, & nice! OCD is not a bad thing to have, when focused :) Did you rebuild the entire engine?
Just replacing carb. Great stuff here. She's had it worked on recently (twice) and didn't like service so I said if anything happens I'll take care of you. So fwd. to getting air filter off and seeing a bolt stuck in carb holding flap open(man I should of took a pic)? As I twist the metal wires about and tilt carb I hear it fall and can't find it in towel I had down right there. Think hmmmmm, maybe I saw it wrong. Nope, puck up towel and there's mystery bolt. Also had wrong size o - ring on other side. Had to stop because I just can't bring myself to squeeze that o - ring in there. New one tomorrow.
Wonder if a Holley 4 barrel with an Edelbrock intake would fit on there? Hmmm ...
Quote from: SHOdded on July 26, 2014, 12:48:41 AM
Wonder if a Holley 4 barrel with an Edelbrock intake would fit on there? Hmmm ...
Ha...maybe on this
(http://img.tapatalk.com/d/14/07/26/yhuba5ys.jpg)
He was pretty happy with surprise stop at R/C store for b day present.
A nitro powered lawn mower.. Tim Taylor would be proud
Quote from: panther427 on July 26, 2014, 05:21:11 AM
A nitro powered lawn mower.. Tim Taylor would be proud
Glad he didn't try the
hair-cutting profession!
Here's pic of what I saw in carb last night (this is me putting bolt back in carb)(http://img.tapatalk.com/d/14/07/26/sevesehe.jpg)
Bolt happen to be perfect match for air filter but both were already there, hmmmm. Big thx to Briggs & Stratton, all ten bolts and nuts were same size!!!
Guy on Facebook, sho owners thing, with Hennessey tune only saying 12.5 and 12.6 runs?
Any idea on the track & conditions to go with that claim?
In Texas, mentioned that'd be fastest tune only SHO, but would require time slip for the honor. We'll see? Maybe, as I asked about track times they responded with 12.5 and 12.6. Sort of generic answer for actually having times.
(http://img.tapatalk.com/d/14/07/28/ja4u5ezu.jpg)
OK...really thinking someone here may be responsible for this
Just received my first recall notice in the mail for my 13 SHO,REGARDING the license plate lamp assembly which I had performed about a month ago.this is affecting 2010-2014.
Quote from: SHOnUup on July 28, 2014, 10:33:05 AM
In Texas, mentioned that'd be fastest tune only SHO, but would require time slip for the honor. We'll see? Maybe, as I asked about track times they responded with 12.5 and 12.6. Sort of generic answer for actually having times.
Our cars can pull that off.
Any of us can do that. Tell your tuner you want it tuned for max boost and not for road/safe/reliable daily use. Throw caution to the wind and you too can have a ticking time bomb rocket of a SHO. ;P
Quote from: ZSHO on July 28, 2014, 04:51:06 PM
Just received my first recall notice in the mail for my 13 SHO,REGARDING the license plate lamp assembly which I had performed about a month ago.this is affecting 2010-2014.
Arrived today.
Quote from: kinder on July 28, 2014, 07:07:08 PM
Quote from: SHOnUup on July 28, 2014, 10:33:05 AM
In Texas, mentioned that'd be fastest tune only SHO, but would require time slip for the honor. We'll see? Maybe, as I asked about track times they responded with 12.5 and 12.6. Sort of generic answer for actually having times.
Our cars can pull that off.
Any of us can do that. Tell your tuner you want it tuned for max boost and not for road/safe/reliable daily use. Throw caution to the wind and you too can have a ticking time bomb rocket of a SHO. ;P
Roger that.
(http://img.tapatalk.com/d/14/08/02/tymu4ezu.jpg)
Lovely Michigan roadways. These are all the way down the street. This one in question would be in the middle range for height and sticking out in the road.
Tire Buster Award!!!
First MKC in person. Pretty cool car. Can't get a good pic at night.
(http://img.tapatalk.com/d/14/08/02/9e9yhe7e.jpg)
This guy parked next to me at work today. I bet this grandpa is the life of the party...
(http://i1249.photobucket.com/albums/hh507/pokermunkee/RoadRageSucks_zps3e259741.jpg)
(http://img.tapatalk.com/d/14/08/02/hy4ysary.jpg)
There's the mechanics well in pole barn. The horror story that lies underneath to come.
(http://img.tapatalk.com/d/14/08/03/ra6u6asu.jpg)
Demolition derby's are awesome!!!
This guy
(http://img.tapatalk.com/d/14/08/04/ape5ytuh.jpg)
Was ready to leave the course after 9 holes....but
(http://img.tapatalk.com/d/14/08/04/yqaza9an.jpg)
Made this shot from 155 out for eagle on par 4...perma-grin til we left...lol
Awesome it's always the little things that can really put a smile on your face.
Quote from: panther427 on August 04, 2014, 09:57:39 AM
Awesome it's always the little things that can really put a smile on your face.
Golf...4 letter word...how quickly attitudes can change with one swing...he really needed it...after watching me pull an eagle the last 2 rounds he mentioned he wanted to say "eagle 1 to eagle 2, over and out" before the round as this was his first eagle.
Impressive, eagle on par 4 :thumb:
Quote from: SHOdded on August 04, 2014, 10:37:49 AM
Impressive, eagle on par 4 :thumb:
All luck, lol...he hit it and says "oh $hit", we watch it land well short of the green and roll in with about 10' of break...
(http://img.tapatalk.com/d/14/08/05/y5u2arap.jpg)
After 5 hours of cleaning yesterday it's sparkling again. Thinking this tank kills way to much time in the summer with all the maintenence.
Quote from: SHOnUup on August 05, 2014, 10:08:06 AM
After 5 hours of cleaning yesterday it's sparkling again. Thinking this tank kills way to much time in the summer with all the maintenence.
The price you pay for not running the screensaver and wanting the real thing ;)
Well if anyone sees a good looking silver sho in the springs this week it's me!
Quote from: SHOdded on August 05, 2014, 12:07:19 PM
Quote from: SHOnUup on August 05, 2014, 10:08:06 AM
After 5 hours of cleaning yesterday it's sparkling again. Thinking this tank kills way to much time in the summer with all the maintenence.
The price you pay for not running the screensaver and wanting the real thing ;)
Feeling the pain. Tank was empty for 5 years. Blaming it on the SHO too. Didn't realize when shopping for grilles that mobsteel was no longer doing them and noticed they were located in Brighton area where a known cichlid breeder is. One thing led to another.
I used to have a 55g full of african cichlids as well. Was fun when I was single and no kids. Didn't set it up again after moving from Vegas to Colorado. I don't even have time to wax my car anymore!
Quote from: PokerMunkee on August 05, 2014, 01:31:30 PM
I used to have a 55g full of african cichlids as well. Was fun when I was single and no kids. Didn't set it up again after moving from Vegas to Colorado. I don't even have time to wax my car anymore!
Ain't that the truth...damn kids burn up way too much time. I guess I could NOT coach two softball teams, but then I would just have to sit on the bleachers during all those games and talk to the wife. Hmmmm....nah...coaching it is :)
Quote from: PokerMunkee on August 05, 2014, 01:31:30 PM
I used to have a 55g full of african cichlids as well. Was fun when I was single and no kids. Didn't set it up again after moving from Vegas to Colorado. I don't even have time to wax my car anymore!
This is our last tank (90) from when we use to breed them also. Had a room with over 30 tanks. Then the 2nd kid popped out and bye-bye fish tanks. Have a 180 acrylic in garage that's gonna get the best filter system I can muster up for current fish as they are growing fast.
30 ... tanks ... definitely a fulltime job & then some!
Quote from: SHOdded on August 05, 2014, 04:23:21 PM
30 ... tanks ... definitely a fulltime job & then some!
Oh yeah...1-2 hrs a day with a weekly 10 hrs clean...you could say I don't miss it
(http://img.tapatalk.com/d/14/08/06/u9ezatu9.jpg)
Rained, damn rain is no fun.
As long as it beads on the paint :)
Quote from: SHOdded on August 05, 2014, 10:53:04 PM
As long as it beads on the paint :)
Amen...zoomed in it looks like paint drops...new screen saver
(http://img.tapatalk.com/d/14/08/06/a5a7y4a4.jpg)
Picture day. It won't let me upload the full resolution so 400x 266 is all we get. The original 4608x3072 is stunning. (http://img.tapatalk.com/d/14/08/06/nyjy9u8a.jpg)(http://img.tapatalk.com/d/14/08/06/a2a6ahyd.jpg)
Looking very solid...bet that silver sparkles as the sun sets!
Quote from: wasinger3000 on August 06, 2014, 08:58:19 AM
Picture day. It won't let me upload the full resolution so 400x 266 is all we get. The original 4608x3072 is stunning.
Nice! Put up a link off of PB or flickr :D
(http://img.tapatalk.com/d/14/08/07/y6esuhy2.jpg)
Drove by this place today.
For some reason thought of this:
(http://usarmy.vo.llnwd.net/e2/c/images/2014/07/01/352579/original.jpg)
Aberdeen Proving Ground :D
Sitting in line at Milan Dragway! !!
First 2 runs after hour drive and lined right up.(http://img.tapatalk.com/d/14/08/07/ejyqy9ab.jpg)
Nice times!!
Thx...after those 2 I decided to flash tune again....bad idea???
Got a recall notice from Ford today. Right halfshaft... Left click images to enlarge them.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/photo1-10_zpsc32da217.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/photo1-10_zpsc32da217.jpg.html)
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/photo2-10_zps95200cb1.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/photo2-10_zps95200cb1.jpg.html)
Quote from: BiGMaC on August 07, 2014, 01:27:42 AM
Got a recall notice from Ford today. Right halfshaft... Left click images to enlarge them.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/photo1-10_zpsc32da217.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/photo1-10_zpsc32da217.jpg.html)
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/photo2-10_zps95200cb1.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/photo2-10_zps95200cb1.jpg.html)
Did you get one for the rear license frame assembly ,BIGMaC ? It takes a couple weeks to order.
Didn't get one for the rear license lamp. I think they are trying to confine that to places with a lot of snow/rain/chemicals on the roads...
But I will mention the TSB and the corrosion I cleaned out of the right side... Try to get a 2fer.
BTW, no halfshaft symptoms noted
Tell them about the sand storms out your way, BiGMaC! That stuff gets in everything!
http://www.carsguide.com.au/car-news/2015-ford-falcon-xr8-revealed-29058#.U-QtLMrnYm9 (http://www.carsguide.com.au/car-news/2015-ford-falcon-xr8-revealed-29058#.U-QtLMrnYm9)
Quote from: SHOdded on August 07, 2014, 09:07:22 AM
Tell them about the sand storms out your way, BiGMaC! That stuff gets in everything!
Here's a shot of a recent habboob as we call them... yea Manu, the dust gets in and through everything and reduces visibility to near zero... but i fear it won't get me a new license plate light. The wall of dust is about 1500' tall.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/photo1-10_zps15fc92ca.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/photo1-10_zps15fc92ca.jpg.html)
That's crazy! Looks like a nightmare.
Quote from: SHOnUup on August 07, 2014, 10:51:06 PM
That's crazy! Looks like a nightmare.
...LOL, and this pic was taken at 2pm and you can see it was getting dark!
Quote from: BiGMaC on August 07, 2014, 11:01:19 PM
Quote from: SHOnUup on August 07, 2014, 10:51:06 PM
That's crazy! Looks like a nightmare.
...LOL, and this pic was taken at 2pm and you can see it was getting dark!
You pull a u - turn and gun it...is that dust cloud faster than the SHO?
Quote from: SHOnUup on August 07, 2014, 11:06:34 PM
Quote from: BiGMaC on August 07, 2014, 11:01:19 PM
Quote from: SHOnUup on August 07, 2014, 10:51:06 PM
That's crazy! Looks like a nightmare.
...LOL, and this pic was taken at 2pm and you can see it was getting dark!
You pull a u - turn and gun it...is that dust cloud faster than the SHO?
moves about 40mph.... but doesn't stop for gas or red lights LOL
Best is often to pull way off the road and turn off your lights.
How often they roll through?
Dust storms are pretty common... Vary with time of year.. Maybe average 1-2/month... But a true habboob only 1-2x/ year here... Between Phx and Tucson at least twice that. Reminds us how small we are in the scheme of things! LOL
Just started seeing them on the news a couple years ago. Did they always occur and I just wasn't aware or is it more frequently happening now why it's been covered?
We have 2 driving seasons here in Michigan. Ice and snow, and the orange barrel season.
(http://img.tapatalk.com/d/14/08/09/de8abenu.jpg)
Actually always hapened... here's a video... in the middle part you get a close-up of the airport disappearing...
http://youtu.be/8W4Cx44XKZ4 (http://youtu.be/8W4Cx44XKZ4)
Mission: Impossible Ghost Protocol "Sandstorm Chase" Movie Clip Official [HD] (http://www.youtube.com/watch?v=XQYNzJXJnDI#ws)
Heeeere's Tom!!!
Trying to make me feel bad Manu?... The Tom in your vid still has hair! LOL
They all wear rugs nowadays, so no worries! LOL
BTW, if you're gonna push me to make a comment, hope this pacifies you ;)
(http://rookery.s3.amazonaws.com/1010000/1010062_9534_1024x2000.jpg)
LOL...sure does make you feel a bit smaller...
Walk into local Kroger yesterday and notice all the shelves in produce section were empty on my way to the bakery counter to order a cake for youngest sons bday party. Didn't think much of it until I pass through the meat section on the way to grab a gallon of milk and everything is empty and being cleaned. Hmmmm....Get to the milk coolers and there is yellow emergency tape through all the handles and a little sign saying "sorry for the inconvenience, but at this time fresh produce is not for sale". Turn and notice the entire butter, cheese, and yogurt set of coolers are empty also...
Just purchased stuff from all these coolers a day prior...
Looks like dinners getting overcooked!
Better safe than sorry!
LMS just released video of the motor build and dyno #'s on the 3.5 ecoboost.
Quote from: SHOnUup on August 09, 2014, 09:41:24 AM
LMS just released video of the motor build and dyno #'s on the 3.5 ecoboost.
Thanks!
For those looking:
World's highest horsepower EcoBoost Taurus SHO by Livernois Motorsports (http://www.youtube.com/watch?v=WSlvKcG3neo#ws)
Quote from: SHOdded on August 09, 2014, 11:23:11 AM
Quote from: SHOnUup on August 09, 2014, 09:41:24 AM
LMS just released video of the motor build and dyno #'s on the 3.5 ecoboost.
Thanks!
For those looking:
World's highest horsepower EcoBoost Taurus SHO by Livernois Motorsports (http://www.youtube.com/watch?v=WSlvKcG3neo#ws)
...I hope everyone knows this SHO belongs to our very own Mike (bpd1151)... Congrats Mike!!!
Wow, sh%t just got real! lol
Mid 11's on race fuel? Low 11's?
Hope to see track #'s soon...
Here's what the Wallace Racing Calculator predicts.... Awaiting real life results from Mike.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/BPDQuaterpossible_zps7b3a04ff.png) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/BPDQuaterpossible_zps7b3a04ff.png.html)
Quote from: BiGMaC on August 09, 2014, 07:16:56 PM
Here's what the Wallace Racing Calculator predicts.... Awaiting real life results from Mike.
Yikes!
Quote from: SHOdded on August 09, 2014, 08:12:41 PM
Quote from: BiGMaC on August 09, 2014, 07:16:56 PM
Here's what the Wallace Racing Calculator predicts.... Awaiting real life results from Mike.
Yikes!
As Mike pointed out to me... if the calcu;lsator is for CHP, then add 20% and gett these numbers for the quarter:
computed from your vehicle weight of 4250 pounds and HP of 740 is 10.43 seconds and MPH of 129.56 MPH.
Teaser vid here:
http://youtu.be/P1aag3AaYJY (http://youtu.be/P1aag3AaYJY)
So, his original motor blew up? That's two motors with upgraded turbos/meth tuned by LMS that have gone recently (A6). Ouch. Do we have details on what went wrong with both?
Damn, that girl is smokn' lol
Guess that warning of 450 hp was pretty accurate!
Quote from: SHOdded on August 10, 2014, 06:07:42 AM
Teaser vid here:
http://youtu.be/P1aag3AaYJY (http://youtu.be/P1aag3AaYJY)
(http://img.tapatalk.com/d/14/08/10/ure5e6em.jpg)
Quote from: PokerMunkee on August 10, 2014, 09:20:08 AM
So, his original motor blew up? That's two motors with upgraded turbos/meth tuned by LMS that have gone recently (A6). Ouch. Do we have details on what went wrong with both?
What blown engine?...Not bpd's ....I must have missed something, could you clarify? ...TIA
Quote from: BiGMaC on August 10, 2014, 10:36:15 AM
Quote from: PokerMunkee on August 10, 2014, 09:20:08 AM
So, his original motor blew up? That's two motors with upgraded turbos/meth tuned by LMS that have gone recently (A6). Ouch. Do we have details on what went wrong with both?
?...I missed something, could you clarify? ...TIA
SHodded posted the teaser video a few posts above. Jeff, Mike's photographer, says the other motor blew in the beginning of the video. The video has in the last hour been removed from Youtube..
Quote from: PokerMunkee on August 10, 2014, 10:45:24 AM
Quote from: BiGMaC on August 10, 2014, 10:36:15 AM
Quote from: PokerMunkee on August 10, 2014, 09:20:08 AM
So, his original motor blew up? That's two motors with upgraded turbos/meth tuned by LMS that have gone recently (A6). Ouch. Do we have details on what went wrong with both?
?...I missed something, could you clarify? ...TIA
SHodded posted the teaser video a few posts above. Jeff, Mike's photographer, says the other motor blew in the beginning of the video. The video has in the last hour been removed from Youtube..
Hi yes - I did indeed remove it earlier since I notice grammatical errors late last night/early morning when I was still putting them together via VideoPad Editor. However given I have been up for nearly 20 hours straight, I was exhausted and opted to fix the issues in the morning, which is why this morning I took it down and had to re-edit the primary file.
The video hasn't changed, just fixed the spelling mistakes and the lighting issue (seemed a bit dark at least on my computer)..
Here is the link:
http://youtu.be/3kdm-Lj6UwE (http://youtu.be/3kdm-Lj6UwE)
Watched the vid... don't see the blown engine... Maybe bpd will chime in.... I thought he drove the car to LMS like steve says. Jeff says the engine in Mike's car was never blown.
Jeff's post on this is here: http://www.ecoboostperformanceforum.com/index.php/topic,2162.msg53280.html#msg53280 (http://www.ecoboostperformanceforum.com/index.php/topic,2162.msg53280.html#msg53280)
The rumor mill should stop turning.
Quote from: BBOX on August 10, 2014, 11:28:16 AM
This is exactly why I abandoned any ideas of picking up A6's turbos, because I'm not interested in building a motor. Meth will be the final frontier for me.
Well, you might go with TWO tanks of methanol as it seems in bpd's current setup :D
Strange, I go weeks without ever seeing another SHO in these parts. On the way to the track on Friday I see 3? One was an exact copy if mine lol. Although it was stock. I forgot how high they ride in the stock springs.
(http://img.tapatalk.com/d/14/08/11/sy4a4u3y.jpg)
Enough said.
Blown comments were removed in edited video at the 1:20 mark. Oh well. No rumors, me and others heard it.
Quote from: ShoBoat on August 10, 2014, 12:12:10 PM
Strange, I go weeks without ever seeing another SHO in these parts. On the way to the track on Friday I see 3? One was an exact copy if mine lol. Although it was stock. I forgot how high they ride in the stock springs.
It is wierd... but usually reminds me we have something a bit special!
Finally got a little work done on my pickup. Upgrades and maintenance are coming at a pace considerably slower than I'd envisioned! Running much better now. Vac. advance seems to be advancing a tad too much. And mechanical a tad too little. As always, a work in progress. :D
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-08-07%2023.45.02_zpsa9d0ifto.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-08-07%2023.45.02_zpsa9d0ifto.jpg.html)
Sent from my SM-P600 using Tapatalk
Old pickup, new block?
Anyone believe in chiropractors? I have a sharp pain in my back ever since I turned around to get my son something in his car seat, two weeks now. Pain doesn't happen all the time, just when neck is turned a certain position.
Wondering if one visit to the chiropractor will fix this? I don't want to get on a weekly/monthly scheduled visit.
Quote from: PokerMunkee on August 11, 2014, 09:43:52 AM
Anyone believe in chiropractors? I have a sharp pain in my back ever since I turned around to get my son something in his car seat, two weeks now. Pain doesn't happen all the time, just when neck is turned a certain position.
Wondering if one visit to the chiropractor will fix this? I don't want to get on a weekly/monthly scheduled visit.
Yes...but only for situations like yours...random pain fixes for usually a pinched nerve that has muscles in spasms...my woman goes a few times a month and it really helps her out...
I've only been twice and it fixed me both times. They will pitch you on buying a package that you "need", false, do the stretching they suggest and you'll be fine.
Quote from: SHOnUup on August 11, 2014, 09:47:32 AM
Quote from: PokerMunkee on August 11, 2014, 09:43:52 AM
Anyone believe in chiropractors? I have a sharp pain in my back ever since I turned around to get my son something in his car seat, two weeks now. Pain doesn't happen all the time, just when neck is turned a certain position.
Wondering if one visit to the chiropractor will fix this? I don't want to get on a weekly/monthly scheduled visit.
Yes...but only for situations like yours...random pain fixes for usually a pinched nerve that has muscles in spasms...my woman goes a few times a month and it really helps her out...
I've only been twice and it fixed me both times. They will pitch you on buying a package that you "need", false, do the stretching they suggest and you'll be fine.
Same philosophy here. I haven't been in years and don't go unless I need to. I went through a year of back problems with physical therapists to no avail - I also went to one traditional chiropractor and he quite possibly made it worse. I was in a ton of pain and then found a non-traditional chiropractor that was actually in our clinic. He treats you until you are better and doesn't keep trying to bring you back for the ongoing maintenance stuff. He took the time to understand what was wrong...and did some xrays before he went near my back. He literally changed my life...I went from being miserable every single day to walking out of his office almost pain free after he put my back in to place. I felt it move and I felt instant relief and I am not a believer in general so to speak. I certainly do believe they are necessary now...you just need to find a good one which can be a challenge.
X2 on that stuff^^^...if in Southeast Michigan, at 22 & Shoener (spelling escapes me), Gigante chiropractic, owned, operated and ran by Wayne. Tell him Rich sent you.
Only part of my post SHOwed up?
Used the left pointing arrow (less than symbol) and everything after it didn't post until I deleted it.
Our chiropractor has been good 4 us: Dr. Doug Beech in Bethesda, MD.
Which part of your post was the symbol supposed to appear in?
Quote from: SHOdded on August 11, 2014, 10:35:21 AM
Which part of your post was the symbol supposed to appear in?
Right after the first paranthasese and before spelling ...this symbol to be clear "<"
<
As it ate the rest of post...lol
Ah, the Pacman symbol. I C Now. Will look into it, really odd ...
Quote from: SHOdded on August 10, 2014, 10:12:40 PM
Old pickup, new block?
Not that extravagant, unfortunately! Haha
Old truck, old block, old...everything.
Just updated a little. Trying to improve road worthiness right now.
XD
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-05-09%2019.56.07_zpsdztbyhvs.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-05-09%2019.56.07_zpsdztbyhvs.jpg.html)
Sent from my SM-P600 using Tapatalk
^^^nice truck
(http://img.tapatalk.com/d/14/08/12/2u3e5ube.jpg)
(http://img.tapatalk.com/d/14/08/12/6ema6e7y.jpg)(http://img.tapatalk.com/d/14/08/12/meqaqypy.jpg)
It's been raining for 10 hours now.
Hope their electronics are secured!
11 hours of rain. Pretty heavy the entire time. These are photos of friends on Facebook.
(http://img.tapatalk.com/d/14/08/12/vuma6u4u.jpg)
Was on the Livernois site looking to pick up a 160 degree thermostat...$21 shipping for Fedex Ground? WTF? How much does that thing weigh?
Quote from: Wilson on August 12, 2014, 11:23:27 AM
Was on the Livernois site looking to pick up a 160 degree thermostat...$21 shipping for Fedex Ground? WTF? How much does that thing weigh?
Lol...no usps regular ground...small items like the tstat get delivered faster than 3 days usually
Quote from: Wilson on August 12, 2014, 11:23:27 AM
Was on the Livernois site looking to pick up a 160 degree thermostat...$21 shipping for Fedex Ground? WTF? How much does that thing weigh?
We are taking a serious look at shipping costs for smaller items. We have been using the Fedex calculator. Looking at other options now.
Quote from: Livernois Motorsports on August 12, 2014, 09:46:16 PM
Quote from: Wilson on August 12, 2014, 11:23:27 AM
Was on the Livernois site looking to pick up a 160 degree thermostat...$21 shipping for Fedex Ground? WTF? How much does that thing weigh?
We are taking a serious look at shipping costs for smaller items. We have been using the Fedex calculator. Looking at other options now.
PLEASE PLEASE stop using fedex i have had several bad experiance with them lately.. For small packages the USPS still is the best and they have been getting my purchases to me personally faster that fedex and UPS. just my 2 cents.
Got pulled over today. I guess ripping a u turn, driving down the turn lane for at least a mile, and then cutting off the car behind me was in the sake of safety to tell me my windows are tinted.
Quote from: SHOnUup on August 14, 2014, 06:13:03 PM
Got pulled over today. I guess ripping a u turn, driving down the turn lane for at least a mile, and then cutting off the car behind me was in the sake of safety to tell me my windows are tinted.
Blah!!! You'd think they'd better things to do. Too quiet lately?
Wife in the car...seems to attract law enforcement lately...made an appointment with eye doctor, might tint the windshield after the ok.
(http://img.tapatalk.com/d/14/08/15/qesy7ysu.jpg)
Is this just a concept car?
Quote from: SHOnUup on August 15, 2014, 08:50:57 AM
(http://img.tapatalk.com/d/14/08/15/qesy7ysu.jpg)
Is this just a concept car?
Ferrari F80 Concept 2014: http://youtu.be/OIEZoyGQFPA
Looks like a hot wheels.. the replacement windshield would be pricey.
Quote from: panther427 on August 15, 2014, 10:50:36 AM
Looks like a hot wheels.. the replacement windshield would be pricey.
Lol.....The replacement anything would be pricey!
I don't think safelite could replace that windshield with their little suction cup device.
Hah
What would the part be labeled, hood windshield roof thing a ma jig
Quote from: SHOnUup on August 15, 2014, 12:10:16 PM
What would the part be labeled, hood windshield roof thing a ma jig
Lmao
Another Ford recall..........13-14 Taurus and MKS and more..
http://abcnews.go.com/Business/wireStory/ford-recalls-83250-cars-suvs-24988742 (http://abcnews.go.com/Business/wireStory/ford-recalls-83250-cars-suvs-24988742)
Quote from: PokerMunkee on August 15, 2014, 12:55:23 PM
Another Ford recall..........13-14 Taurus and MKS and more..
http://abcnews.go.com/Business/wireStory/ford-recalls-83250-cars-suvs-24988742 (http://abcnews.go.com/Business/wireStory/ford-recalls-83250-cars-suvs-24988742)
More of a continuation of the previous. Guess they found more than they thought are affected.
I sometimes create portraits, when I can find time, which isn't often. I'm a little rusty, haven't worked on one in a while. Made one pretty quickly as a tribute for Robin Williams. Not totally satisfied with it, so working on a better one now.
I've been pretty bummed this week that the world lost such a profound talent.
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-08-14%2018.43.34_zpshg0foeg1.png) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-08-14%2018.43.34_zpshg0foeg1.png.html)
Sent from my SM-N900V using Tapatalk
Quote from: IHeartGroceries on August 15, 2014, 07:11:51 PM
Not totally satisfied with it, so working on a better one now.
Dude!!! Nice work, and thank you for posting it :thumb: Being a creative talent often demands a high price.
Very nice. I draw a little from time to time, but not that good. Faces were always my downfall in sketching...great talent you have!!!
(http://img.tapatalk.com/d/14/08/16/a7u9eges.jpg)
This guy was playing in his benz alot. Spinning the tires almost every time we moved. Said it had the "black package" and was pulling 675 hp. Best 1/4 was only a 12.3 though. Told him I ran a 12.6 in my $25 k car and he laughed. Then I launched next to him at same time and leaped out on him he wouldn't chat no more...lol
Looks like a c63 black edition. Nice car no doubt.
Ya they have too much power. The black. Series where not any faster to 60 than the lower powered amg car
Guy was real cool, at least 65 years old playing like he just got his license. ..lol
(http://img.tapatalk.com/d/14/08/17/zepumu5e.jpg)
Quote from: SHOnUup on August 17, 2014, 08:51:22 AM
(http://img.tapatalk.com/d/14/08/17/zepumu5e.jpg)
Nice! Are you on CarFiend?
When the Turbo is bigger than the car lol
Here's a few photos of a trip my wife and I took to Switzerland in June:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.34.02_zps4rclsear.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.34.02_zps4rclsear.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.39.11_zpsirpl1zow.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.39.11_zpsirpl1zow.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-18%2014.00.23_zpsqge3yvh3.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-18%2014.00.23_zpsqge3yvh3.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140619_094612_zpspwwaxe4i.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140619_094612_zpspwwaxe4i.jpg.html)
Sent from my SM-N900V using Tapatalk
Could be paintings ... nice!
Quote from: IHeartGroceries on August 18, 2014, 06:37:40 PM
Here's a few photos of a trip my wife and I took to Switzerland in June:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.34.02_zps4rclsear.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.34.02_zps4rclsear.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.39.11_zpsirpl1zow.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.39.11_zpsirpl1zow.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-18%2014.00.23_zpsqge3yvh3.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-18%2014.00.23_zpsqge3yvh3.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140619_094612_zpspwwaxe4i.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140619_094612_zpspwwaxe4i.jpg.html)
Sent from my SM-N900V using Tapatalk
Beautiful
Quote from: SHOnUup on August 17, 2014, 06:41:46 PM
Quote from: ford4thot on August 17, 2014, 06:12:15 PM
Quote from: SHOnUup on August 17, 2014, 08:51:22 AM
(http://img.tapatalk.com/d/14/08/17/zepumu5e.jpg)
Nice! Are you on CarFiend?
Nope, what is carfriend?
CarFiend, not friend....it's a cool free app for vehicle enthusiasts, like instagram but only cars and trucks. Pretty cool, see some amazing build and photos and videos. Check it out, it's on android and apple.
My user name is Zealous
Thx ford4thot...will have to check out.
Great pics of Switzerland!!!
Quote from: IHeartGroceries on August 18, 2014, 06:37:40 PM
Here's a few photos of a trip my wife and I took to Switzerland in June:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.34.02_zps4rclsear.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.34.02_zps4rclsear.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.39.11_zpsirpl1zow.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.39.11_zpsirpl1zow.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-18%2014.00.23_zpsqge3yvh3.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-18%2014.00.23_zpsqge3yvh3.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140619_094612_zpspwwaxe4i.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140619_094612_zpspwwaxe4i.jpg.html)
Sent from my SM-N900V using Tapatalk
I suddenly had a terrible flash back as a child being forced to watch the Sound of Music.....
Sent from my iPhone using Tapatalk
^^^^Haha...that's funny
Quote from: ShoBoat on August 19, 2014, 11:21:15 AM
Quote from: IHeartGroceries on August 18, 2014, 06:37:40 PM
Here's a few photos of a trip my wife and I took to Switzerland in June:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.34.02_zps4rclsear.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.34.02_zps4rclsear.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-17%2020.39.11_zpsirpl1zow.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-17%2020.39.11_zpsirpl1zow.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/2014-06-18%2014.00.23_zpsqge3yvh3.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/2014-06-18%2014.00.23_zpsqge3yvh3.jpg.html)
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140619_094612_zpspwwaxe4i.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140619_094612_zpspwwaxe4i.jpg.html)
Sent from my SM-N900V using Tapatalk
I suddenly had a terrible flash back as a child being forced to watch the Sound of Music.....
Sent from my iPhone using Tapatalk
Haha! Yeah. I don't think I've ever seen that movie all the way through. But, it was actually filmed wholly or mostly in Austria, which we actually visited as well. In fact, the trip began in Salzburg, Austria, where most of that movie was filmed. We visited (not becasue they were filming locations), most of the sites featured in the film, including the remarkable Mirabellplatz, where various scenes are filmed in the fantastic gardens there. Even the mountaineous scenes were Austrian Alps, which are quite lovely (we visited Hitler's Kehlsteinhaus as well), but simply can't hold a candle to the Swiss Interlaken region.
Sent from my SM-N900V using Tapatalk
Anyone looking at buying one of the new 2015 Suburbans/Yukon/Tahoes?
The wifey is due for a new car and we are pretty much set on a 2015.5 Yukon XL Denali 4wd. Stickers at around $75K for what we want and seeing dealers discounting to $65K already. If I can get one around $60K, then I'm buying it. Hopefully in 6+ months I'll be seeing these prices.
Other than the updated Expedition EL coming out with the 3.5 EB, nothing else compares to these guys in carrying and towing capcity. They keep their value like crazy and the new ones are just beautiful inside and out.
I can't belive I'm considering dropping this much money on a SUV, but you only live once and a happy wife = happy life!
20k more an you can be sitting behind a twin turbo benz suv.
Ha, no thanks. Aren't the GL63's over $100K? I love the space behind the 3rd row in the XL.
Corsa is supposed to have the exhaust done by next month for the new big GM guys. Sounds amazing on the Sierra 6.2
https://www.youtube.com/watch?v=hebtOnpXuA8 (https://www.youtube.com/watch?v=hebtOnpXuA8)
https://www.youtube.com/watch?v=EJZ03BjoEqc (https://www.youtube.com/watch?v=EJZ03BjoEqc)
Quote from: PokerMunkee on August 19, 2014, 12:16:55 PM
Ha, no thanks. Aren't the GL63's over $100K? I love the space behind the 3rd row in the XL.
Corsa is supposed to have the exhaust done by next month for the new big GM guys. Sounds amazing on the Sierra 6.2
https://www.youtube.com/watch?v=hebtOnpXuA8 (https://www.youtube.com/watch?v=hebtOnpXuA8)
https://www.youtube.com/watch?v=EJZ03BjoEqc (https://www.youtube.com/watch?v=EJZ03BjoEqc)
Hah, yeah new the GL63's go for $140k. For the black edition is around $160k.
I always see this old ladies driving them. They have no idea what they are driving and what it's capable of.
Didn't realize how many childish little morons were on the SHO owners Facebook page...just unliked that nonsense
Quote from: SHOnUup on August 19, 2014, 10:41:02 PM
Didn't realize how many childish little morons were on the SHO owners Facebook page...just unliked that nonsense
???
On my trip down south was a pretty new M5 parked next to me,and my son says wow,and i told him i could have 3 SHOs instead of that,and his Pirelli pzeros were almost bald,haha.lol.
Wanted to ring a Driver of a brand new mustang that cut across three lanes of traffic. Including a school bus and blind spot of a cattle Truck coming up to a red stop light
http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320
This guy needs help. If you have a bad day, assaulting someone with your truck will only make it worse.
Could be staged though. Who knows.
Quote from: wasinger3000 on August 20, 2014, 03:45:49 PM
http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320 (http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320)
This guy needs help. If you have a bad day, assaulting someone with your truck will only make it worse.
Could be staged though. Who knows.
I wonder if the guy in the truck realizes that his assault justified the use of deadly force?
Quote from: FoMoCoSHO on August 20, 2014, 04:02:07 PM
Quote from: wasinger3000 on August 20, 2014, 03:45:49 PM
http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320 (http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320)
This guy needs help. If you have a bad day, assaulting someone with your truck will only make it worse.
Could be staged though. Who knows.
I wonder if the guy in the truck realizes that his assault justified the use of deadly force?
He would when the rounds start flying in his direction. I wouldn't hesitate to inform him by demonstration.
Quote from: wasinger3000 on August 20, 2014, 04:04:21 PM
Quote from: FoMoCoSHO on August 20, 2014, 04:02:07 PM
Quote from: wasinger3000 on August 20, 2014, 03:45:49 PM
http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320 (http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320)
This guy needs help. If you have a bad day, assaulting someone with your truck will only make it worse.
Could be staged though. Who knows.
I wonder if the guy in the truck realizes that his assault justified the use of deadly force?
He would when the rounds start flying in his direction. I wouldn't hesitate to inform him by demonstration.
Hence my username, there would have been .45 cal lead flying
Yep. Aim for the wipers since the bullet will deflect once it hits the windshield.
All true, but tell me you have never been tempted to do that at least once lol.
Sent from my iPhone using Tapatalk
I may have contemplated using a T-90 as my daily driver once or twice. Hah
Quote from: glock-coma on August 20, 2014, 04:13:11 PM
Quote from: wasinger3000 on August 20, 2014, 04:04:21 PM
Quote from: FoMoCoSHO on August 20, 2014, 04:02:07 PM
Quote from: wasinger3000 on August 20, 2014, 03:45:49 PM
http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320 (http://speedsociety.com/dodge-cummins-driver-gets-pissed/?var=1320)
This guy needs help. If you have a bad day, assaulting someone with your truck will only make it worse.
Could be staged though. Who knows.
I wonder if the guy in the truck realizes that his assault justified the use of deadly force?
He would when the rounds start flying in his direction. I wouldn't hesitate to inform him by demonstration.
Hence my username, there would have been .45 cal lead flying
.45 cal, for when you care to send the very best....
Quote from: Livernois Motorsports on August 12, 2014, 09:46:16 PM
Quote from: Wilson on August 12, 2014, 11:23:27 AM
Was on the Livernois site looking to pick up a 160 degree thermostat...$21 shipping for Fedex Ground? WTF? How much does that thing weigh?
We are taking a serious look at shipping costs for smaller items. We have been using the Fedex calculator. Looking at other options now.
We are offering free shipping on Even Flo Thermostats now.
A while back after changing my tstat noticed a couple of wires rubbing against the valve cover gasket,turned out to be the knock sensor wires which i put a wire loom over themto protect from heat exposure,today noticed a green and black wire almost in the same area rubbing on the valve cover gasket but also screwed into it as a ground,it was a pita to place the wire loom over it,hopes this helps someone from future headaches.
(http://tapatalk.imageshack.com/v2/14/08/21/b49cb01d04109511d82a28966d9d8f66.jpg)
Pretty cool corn maze
Definitely taking the family to get lost in there. We live right there basically. I see enough room for a SHO symbol there. Lol
I suggest leaving your hedge clippers at home lest you run up against a bouncer named Freddie or Jason ;)
Quote from: SHOdded on August 21, 2014, 04:47:43 PM
I suggest leaving your hedge clippers at home lest you run up against a bouncer named Freddie or Jason ;)
Lol
Does anyone know what a tuned 2.0L eco fusion awd will do 0-60 in?
Quote from: wasinger3000 on August 22, 2014, 03:14:48 PM
Does anyone know what a tuned 2.0L eco fusion awd will do 0-60 in?
Why? Have you been challenged?
Quote from: FoMoCoSHO on August 22, 2014, 03:48:03 PM
Quote from: wasinger3000 on August 22, 2014, 03:14:48 PM
Does anyone know what a tuned 2.0L eco fusion awd will do 0-60 in?
Why? Have you been challenged?
Haha. Nah. I'd destroy it if I was. Just curious as to what it might do. It's quite slow in stock forum. Maybe high 5 ' s after a tune I'm thinking.
I heard there's a Super version of the EB Fusion prowling the streets ... :)
Quote from: SHOdded on August 22, 2014, 07:12:03 PM
I heard there's a Super version of the EB Fusion prowling the streets ... :)
They'll think its super till they meet up with one of the corn injected big girls...
(http://tapatalk.imageshack.com/v2/14/08/22/fd9bfdc81babd27a0d9f8527b22bfcc5.jpg)
Vette anyone?
yes please
Quote from: panther427 on August 22, 2014, 10:22:19 PM
yes please
Looks nice, sounds nice, but would send me to being a single man.
With the new Z06 pricing revealed, starting at $78K, you're going to see a lot of Corvettes for sale, including some C7s.
Drool!
That vette has 1018 rwhp to boot!
Looking for a few opinions. I enjoy both original and at least partially custom looks on classic pickups.
Currently, my 72 C-10 sits all original, and it's a great look. I'm running the thin whitewall tires and everything. I enjoy the look enough to keep it that way, but perhaps freshen it up a tad by powder coating the original steelies a fresh coat of white, losing the factory covers, and perhaps just running those hub and nut caps, and keeping the whitewalls. Also, would run a mild static drop, such as a 3/5 or perhaps a 2/4.
Here it is now:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140320_140840_zpskxxt0pnt.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140320_140840_zpskxxt0pnt.jpg.html)
Alternatively, I also dig the semi-custom appearance of aftermarket, oversized wheels...something like this:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/coys%20and%20low_zpsoxqdktlv.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/coys%20and%20low_zpsoxqdktlv.jpg.html)
The wheels above are I believe 20", which is a little larger than I want. I'm thinking 18", with a little more tire, in a very similar style wheel.
There's bound to be an objective opinion base here. At least, more so than the truck forum. Ha.
Sent from my SM-N900V using Tapatalk
Quote from: IHeartGroceries on August 23, 2014, 01:21:53 PM
Looking for a few opinions. I enjoy both original and at least partially custom looks on classic pickups.
Currently, my 72 C-10 sits all original, and it's a great look. I'm running the thin whitewall tires and everything. I enjoy the look enough to keep it that way, but perhaps freshen it up a tad by powder coating the original steelies a fresh coat of white, losing the factory covers, and perhaps just running those hub and nut caps, and keeping the whitewalls. Also, would run a mild static drop, such as a 3/5 or perhaps a 2/4.
Here it is now:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140320_140840_zpskxxt0pnt.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140320_140840_zpskxxt0pnt.jpg.html)
Alternatively, I also dig the semi-custom appearance of aftermarket, oversized wheels...something like this:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/coys%20and%20low_zpsoxqdktlv.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/coys%20and%20low_zpsoxqdktlv.jpg.html)
The wheels above are I believe 20", which is a little larger than I want. I'm thinking 18", with a little more tire, in a very similar style wheel.
There's bound to be an objective opinion base here. At least, more so than the truck forum. Ha.
Sent from my SM-N900V using Tapatalk
I like the look of some aftermarket wheels on an old truck. Original is a must for some, but they don't compliment the trucks nice lines it seems.
Quote from: SHOnUup on August 23, 2014, 01:32:27 PM
Quote from: IHeartGroceries on August 23, 2014, 01:21:53 PM
Looking for a few opinions. I enjoy both original and at least partially custom looks on classic pickups.
Currently, my 72 C-10 sits all original, and it's a great look. I'm running the thin whitewall tires and everything. I enjoy the look enough to keep it that way, but perhaps freshen it up a tad by powder coating the original steelies a fresh coat of white, losing the factory covers, and perhaps just running those hub and nut caps, and keeping the whitewalls. Also, would run a mild static drop, such as a 3/5 or perhaps a 2/4.
Here it is now:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140320_140840_zpskxxt0pnt.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140320_140840_zpskxxt0pnt.jpg.html)
Alternatively, I also dig the semi-custom appearance of aftermarket, oversized wheels...something like this:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/coys%20and%20low_zpsoxqdktlv.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/coys%20and%20low_zpsoxqdktlv.jpg.html)
The wheels above are I believe 20", which is a little larger than I want. I'm thinking 18", with a little more tire, in a very similar style wheel.
There's bound to be an objective opinion base here. At least, more so than the truck forum. Ha.
Sent from my SM-N900V using Tapatalk
I like the look of some aftermarket wheels on an old truck. Original is a must for some, but they don't compliment the trucks nice lines it seems.
I'm with ya there!
I don't want to lose utility, becasue I still use it alot for yard/house work and such, and even pulling a trailer, even though that is more infrequent. And I don't want to lose any more ride comfort. These old trucks aren't exactly the pinnacle of comfort, with their rudimentary cab mount design and suspension arrangement. 15" wheels gives alot to the ride comfort. Ha!
I found an example of exactly what I want to shoot for. This example is a short wide, and a Cheyenne, but still perfect to give an idea. The wheels are 18" and the drop is 3/5.
(http://img.photobucket.com/albums/v181/HiFiveRecognized/dcp_3615_zpsiza8zlar.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/dcp_3615_zpsiza8zlar.jpg.html)
Looks friggin sweet!
Sent from my SM-N900V using Tapatalk
Old Craggar rims (spelling?)...exactly what I was thinking too...love it
Quote from: IHeartGroceries on August 23, 2014, 01:41:45 PM
Quote from: SHOnUup on August 23, 2014, 01:32:27 PM
Quote from: IHeartGroceries on August 23, 2014, 01:21:53 PM
Looking for a few opinions. I enjoy both original and at least partially custom looks on classic pickups.
Currently, my 72 C-10 sits all original, and it's a great look. I'm running the thin whitewall tires and everything. I enjoy the look enough to keep it that way, but perhaps freshen it up a tad by powder coating the original steelies a fresh coat of white, losing the factory covers, and perhaps just running those hub and nut caps, and keeping the whitewalls. Also, would run a mild static drop, such as a 3/5 or perhaps a 2/4.
Here it is now:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20140320_140840_zpskxxt0pnt.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/20140320_140840_zpskxxt0pnt.jpg.html)
Alternatively, I also dig the semi-custom appearance of aftermarket, oversized wheels...something like this:
(http://img.photobucket.com/albums/v181/HiFiveRecognized/coys%20and%20low_zpsoxqdktlv.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/coys%20and%20low_zpsoxqdktlv.jpg.html)
The wheels above are I believe 20", which is a little larger than I want. I'm thinking 18", with a little more tire, in a very similar style wheel.
There's bound to be an objective opinion base here. At least, more so than the truck forum. Ha.
Sent from my SM-N900V using Tapatalk
I like the look of some aftermarket wheels on an old truck. Original is a must for some, but they don't compliment the trucks nice lines it seems.
I'm with ya there!
I don't want to lose utility, becasue I still use it alot for yard/house work and such, and even pulling a trailer, even though that is more infrequent. And I don't want to lose any more ride comfort. These old trucks aren't exactly the pinnacle of comfort, with their rudimentary cab mount design and suspension arrangement. 15" wheels gives alot to the ride comfort. Ha!
I found an example of exactly what I want to shoot for. This example is a short wide, and a Cheyenne, but still perfect to give an idea. The wheels are 18" and the drop is 3/5.
(http://img.photobucket.com/albums/v181/HiFiveRecognized/dcp_3615_zpsiza8zlar.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/dcp_3615_zpsiza8zlar.jpg.html)
Looks friggin sweet!
Sent from my SM-N900V using Tapatalk
Yes !!!!
Plz dooo eeet
Fyi it's Cragar
Always wanted Cragars but always had FWD :(
Anyone else have this rust colored stuff on the firewall
Quote from: panther427 on August 23, 2014, 05:57:38 PM
Anyone else have this rust colored stuff on the firewall
It's directly below the suction and discharge lines for the evap. it's most likely just moisture staining. If it's oily then it's a freon leak.
Appreciate the advice on the pickup, fellas.
Now, for something a little off the wall...
Anybody have experience painting with a latex sprayer and air?
I have a little rinky dink 1 gal compressor I use for small nailing jobs, dusting, airing up a tire, whatever. I'm looking into picking up a 6 gallon and a sprayer, to paint the trim and doors in my home. I'll essentially be painting the entire interior. Though, I'm guessing spraying is likely not a good idea in a filurnished home, even with drop cloth. That's fine, I can roll onto the walls.
But, I can't STAND brush strokes, which seem impossible to hide on untextured surfaces, like doors and trim.
Probably going to refloor the entire house while I'm at it, while the trim is off. Can just haul doors and reusable trim to the warehouse at work and paint them, and allow them to dry there.
Anybody have advice? I don't know much about paint, especially spraying it.
Sent from my SM-N900V using Tapatalk
Never sprayed myself. Did plenty of rolling and brushing. Think my painters always mixed a little extra water in paint and said to keep the gun very clean, as in after use clean it good. Painting is a non fun job I've learned. And make sure you have a good light to shine on the walls.
Paint strainer also, most paint comes with chunks and you never know how long it's been there. So when using a gun, not to clog it, strain paint...i may think of more...lol
That's good stuff. Lawd, I hate painting. Especially with a brush on trim. So, the prospect of spraying is literally exciting.
In the past, I've used some additive which is added to paint, which is suppose to reduce brush strokes, and it works a little, but it just seems impossible to avoid entirely, when using a brush. I know temperature and especially humidity play a pretty big factor in how paint settles and brush strokes and all of that jazz.
Sent from my SM-N900V using Tapatalk
Quality of brush makes a big difference also. Spraying does sound fun. Wish I had the skills to spray cars, that sounds real fun!
Why do we drive on parkways but park in drive ways? ???
http://bankspower.com/products/show/480/94 (http://bankspower.com/products/show/480/94)
Quote from: panther427 on August 28, 2014, 03:11:06 PM
http://bankspower.com/products/show/480/94 (http://bankspower.com/products/show/480/94)
Sexy!
Sent from my iPhone using Tapatalk
Also contacted them about there water meth systems they sell for the f 150 and they say the plug and play will work on the SHO explorer aand flex
Pretty cool. https://www.youtube.com/watch?v=-jExV7N9U0k (https://www.youtube.com/watch?v=-jExV7N9U0k)
For those of you that forget what this capable of. https://www.youtube.com/watch?v=G-DsrC57UD8 (https://www.youtube.com/watch?v=G-DsrC57UD8)
Out to eat and see this. Had to park next to.(http://tapatalk.imageshack.com/v2/14/08/29/f0f447bd0bef08016fdaa193304bad59.jpg)
Twins!
Nice straight parking too! Grille looks great.
Funny you mention the parking, as the wife was driving. After a a couple attempts we achieved this nice angle...lol. Made sure she parked a bumper ahead though..lol
Looks like guy in red one made his grille, looked spaced a little weird.
Found a place that sells VP M1 for $4.05 a gallon! I love cheap meth...
Quote from: wasinger3000 on September 02, 2014, 12:29:19 PM
Found a place that sells VP M1 for $4.05 a gallon! I love cheap meth...
Oh wow, online or local?
Quote from: Wilson on September 02, 2014, 01:18:27 PM
Quote from: wasinger3000 on September 02, 2014, 12:29:19 PM
Found a place that sells VP M1 for $4.05 a gallon! I love cheap meth...
Oh wow, online or local?
Local. It's 58 miles away from me so with $20 in gas it's still way cheaper than online. All I could find on the net was $16 a gallon and up.
Wish I was in the SHO when I saw these guys. May have changed routes real quick!
(http://tapatalk.imageshack.com/v2/14/09/02/99678831ed3cba46377e923477d4253b.jpg)
Saw this today too.(http://tapatalk.imageshack.com/v2/14/09/02/d3015e7716be1af777a312bf46c41edb.jpg)
(http://tapatalk.imageshack.com/v2/14/09/02/ff351a152efc3fcadfb0013469cf78b4.jpg)
Didn't realize our cars had a washer fluid level sensor.... that makes meth even safer.
Its all the way at the bottom,held in by a rubber grommet,will be a good idea just to have one of those rubber grommets laying around just in case of a leak?Little pita to remove though,you have to remove the rim and tire and remove part of the wheel well for access for the pump.grommett and the level sensor.
Yeah I keep a tube of 1 min gasket on the car for the just in case times on the road. Stuff works wonders.
I'm just glad the car has a sensor so If i ever do get low on meth on a long road tip I'll know to pull over and fill up.
(http://tapatalk.imageshack.com/v2/14/09/03/ae475011a932f2e0a95dd1615bafa40a.jpg)
METH!
Not to many SHO in my area,driving my kids to school saw a Black SHO but it turned out to be a limited with the 20in flower wheels,just the front grill was a dead giveaway,looked identical.
The xcal x4 hardware is a huge disappointment. I look at all the tech thats packed in my nexus 7.....then I look at the x4 with its ridiculous shape, lack of mounting bracket, and a screen reminiscent of a kids electronic toy.....so much fail in one tiny package.
I agree!! ^^^^
IMHO....Seems that you just need a (your tablet/laptop connector) to OBDII cable or a wireless dongle. Beyond that it is simply on the tuner to allow you to load the app and tune on some device other than SCT or MyCal tuner. Then we'd find out how much a tune is really worth.
Embedding the tuning software in hardware standardizes the operating environment, raises reliability & provides better protection for proprietary elements from hackers than portable software ever could. Really no different from what Apple has been doing (albeit significantly better) for decades. That said, I am looking at Windows tablets for running software such as SCT Livewire and ForScan. Hate having to lug around a laptop for these things, as I do extended logging frequently.
Quote from: SHOdded on September 05, 2014, 04:23:03 AM
Embedding the tuning software in hardware standardizes the operating environment, raises reliability & provides better protection for proprietary elements from hackers than portable software ever could. Really no different from what Apple has been doing (albeit significantly better) for decades. That said, I am looking at Windows tablets for running software such as SCT Livewire and ForScan. Hate having to lug around a laptop for these things, as I do extended logging frequently.
Wasn't the original machine for the masses that functions like current tuners called Nintendo or was it Atari? LOL, let's find a way to take a big step forward....
(http://img.photobucket.com/albums/v181/HiFiveRecognized/AP3-SUB-003-17_zpsojpmajnb.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/AP3-SUB-003-17_zpsojpmajnb.jpg.html)
This little rascal leaves quote a bit to be desired. Even the v2 was pretty decent. The v3 AP is just sweet.
Sent from my SM-N900V using Tapatalk
Quote from: IHeartGroceries on September 05, 2014, 01:14:54 PM
This little rascal leaves quote a bit to be desired. Even the v2 was pretty decent. The v3 AP is just sweet.
Do tell! Application, self-tuned, diagnostics etc ...
Unless Cobb comes to our platform, windows tab plus livewire makes a lot of sense.
Quote from: IHeartGroceries on September 05, 2014, 01:14:54 PM
(http://img.photobucket.com/albums/v181/HiFiveRecognized/AP3-SUB-003-17_zpsojpmajnb.jpg) (http://s.photobucket.com/user/HiFiveRecognized/media/AP3-SUB-003-17_zpsojpmajnb.jpg.html)
This little rascal leaves quote a bit to be desired. Even the v2 was pretty decent. The v3 AP is just sweet.
Sent from my SM-N900V using Tapatalk
Just from an aesthetics perspective, that is Much better.
I'd gladly pay what I'm paying now for the software license only, especially if it would allow for one device that actually doesn't look like s*** in my $50,000 car.
I get tired of swapping out devices every time I get a tune tweak or want to run a data log.
The x4 is extremely limited for data logging so this just adds to my frustration as I would need to use it in pass thru mode in conjunction with a laptop to get all the needed parameters.
Ultimately what this market needs is competition, then SCT wouldn't be able to peddle this crap off on us.
I have no reason to believe a Windows tablet wouldn't be able to replace a laptop for what we need. ForScan uses Bluetooth, have to check if Livewire does as well.
I am in agreement with your thinking, FoMoCo, but short of having portable software, I too would like hardware that is in step with the times.
(http://tapatalk.imageshack.com/v2/14/09/07/16bdf5abd1881429fc715e5c1c3ae6c1.jpg)
SHOdded, think we could start a random pics thread?
You rang?
www.ecoboostperformanceforum.com/index.php?topic=3647 (http://www.ecoboostperformanceforum.com/index.php?topic=3647.new#new)
Quote from: SHOdded on September 07, 2014, 09:01:51 AM
You rang?
www.ecoboostperformanceforum.com/index.php?topic=3647 (http://www.ecoboostperformanceforum.com/index.php?topic=3647.new#new)
This is why you are the "MAN (U)"
LOL :)
Anyone know why ford doesn't use the 3.2 diesel that is in the transit 250 in the f150? Seems like it would be a good fit. Maybe to much is invested in the ecoboost branding.
Maybe revert to 2-bar stock first and see how bad the soot gets so you have a baseline comparison?
I don't think there's a properly running DI engine out there that doesn't soot up the exhaust outlets.
Sent from my SM-N900V using Tapatalk
Quote from: IHeartGroceries on September 09, 2014, 11:29:18 AM
I don't think there's a properly running DI engine out there that doesn't soot up the exhaust outlets.
Sent from my SM-N900V using Tapatalk
Mine does not.
Corn FTW!
Same benefits from methanol or ethanol?
I had this is random pics of the day, but thought its probably better here.
Testing a fire suppression system in an engine test cell this morning.
Not an ecoboost, but a ford 3.5 v6 going through some intake/exhaust valve tests.
The test engineer couldn't/wouldn't give me
anymore info.
Sent from my iPhone using Tapatalk
Ha guys/gals MsSHOman went in the Hospital to replace her knee!(owch!!!!) Every thing went good but dropping the hammer in her EcoBoost any time soon is not going to be happen!!! Will keep you up dated.
Wish you and Ms SHOman the best and a speedy recovery.
Best of luck, shoman, I'm sure she'll be up & around in no time at all :D
^^^X2...heavy throttle might be good rehab on the leg:)
Thanks guys! Her 1.6L EB Escape is got nice pick-up but it's her right knee so she will not be driving for some time. Boo Woo!!!
Good to catch up with you Ecoboobie's once again. Woops...is that a bad word around here now. LOL. I felta thigh was...on another Dave/LMS forum. Cheers.
It's about to get a little bit toasty in another thread lol.... shots fired!
Quote from: wasinger3000 on September 11, 2014, 09:41:23 AM
It's about to get a little bit toasty in another thread lol.... shots fired!
Lol...great thing about the passion from both sides is the obvious satisfaction with both tuners...competition is what keeps the platform moving forward
Don't even get me started on that list.. lol.
Noticed since having a tune my plugs need to be replaced more often,this is my third time changing the plugs,the first set were pregapped at 0.31-0.32 and installed them,the set that i changed now had the same gap so gapped them at 0.30 exactly and noticed the car to run much smoother at 0.30 than 0.31-0.32,MC SP-534,the picture are plugs changed at only 3k on them and that was after a lengthy car trip,there is no oil residue on them thats the antiseize.
You changed them already? What was the gap on the previous set at?
Quote from: SHOdded on September 11, 2014, 10:10:56 AM
You changed them already? What was the gap on the previous set at?
The SP-534 came pregapped at 0.31-o.32 and installed them,now i gapped them at 0.30 exactly and feels alot smoothe,and thats why i changed them cause wanted them exactly 0.30.
Aha! Cool beans :)
I just want to state for the record...
Demolishing ceramic tile thinset from concrete substrate is the absolute worst s*** imaginable in a lived-in domicile.
Never again.
Sent from my SM-N900V using Tapatalk
Sure looks like it on all the home improvement shows! Move into a new home?
(http://tapatalk.imageshack.com/v2/14/09/11/8f326869980c6fc11001c0c2870ee372.jpg)(http://tapatalk.imageshack.com/v2/14/09/11/424937a4c9f8c6d58a05f05f3c841a2d.jpg)
Custom tile, love it!!!
Quote from: IHeartGroceries on September 11, 2014, 11:12:35 AM
I just want to state for the record...
Demolishing ceramic tile thinset from concrete substrate is the absolute worst s*** imaginable in a lived-in domicile.
Never again.
Sent from my SM-N900V using Tapatalk
You use hammer drill with wide chisel bit?
Quote from: SHOdded on September 11, 2014, 11:21:13 AM
Sure looks like it on all the home improvement shows! Move into a new home?
Actually, no. Bought this house new in 2012. Somebody else had it built with some customizations, including the horrendous tile throughout most of the home. They backed out on their contract and we swooped in and bought it, becasue it was new and move-in ready. Been there since. Never liked the tile. Can't believe anybody would pay a premium to have this garbage installed.
Quote from: SHOnUup on September 11, 2014, 11:25:10 AM
(http://tapatalk.imageshack.com/v2/14/09/11/8f326869980c6fc11001c0c2870ee372.jpg)(http://tapatalk.imageshack.com/v2/14/09/11/424937a4c9f8c6d58a05f05f3c841a2d.jpg)
Custom tile, love it!!!
Looks fantastic! I love tile. It's my favorite flooring, when it's good tile and done correctly.
Quote from: SHOnUup on September 11, 2014, 11:31:11 AM
Quote from: IHeartGroceries on September 11, 2014, 11:12:35 AM
I just want to state for the record...
Demolishing ceramic tile thinset from concrete substrate is the absolute worst s*** imaginable in a lived-in domicile.
Never again.
Sent from my SM-N900V using Tapatalk
You use hammer drill with wide chisel bit?
I did, actually. I am using a Hilti demolition hammer drill, with a chisel bit.
This is my first time demoing tile from a concrete subfloor, so I don't have anything to compare it to. But, whoever laid this tile did a hell of a job. The mastic is literally like apart of the slab. It's unreal.
So far, chisel it all off, grind off the remaining high spots, then go back and fill in the low spots with compound filler, then go back again and take those high spots back down with the grinder...Then the subfloor is ready.
I still have like 600 Sq ft. to demo. I'm really hoping the thinset is not set as well in the remaining areas. Sheesh.
Sent from my SM-N900V using Tapatalk
Sounds like you should have just lived with it.. hopefully the rest of the House was built as strong as your floors
If they used mastic instead of mortar it is a complete PIA...I've actually convinced customers to use a self leveling mortar instead of demoing that crap. Little pricy, but awesome to lay tile afterwards on completely level surface.
Quote from: panther427 on September 11, 2014, 11:56:51 AM
Sounds like you should have just lived with it.. hopefully the rest of the House was built as strong as your floors
Omg I know it. I just wanted to replace the carpet! Yeah, I agree with the wife, the tile is horrific. But, totally livable. She refused and said if we do carpeted areas, we do it all. And so, FML.
Quote from: SHOnUup on September 11, 2014, 12:01:41 PM
If they used mastic instead of mortar it is a complete PIA...I've actually convinced customers to use a self leveling mortar instead of demoing that crap. Little pricy, but awesome to lay tile afterwards on completely level surface.
Really, I guess I am ignorant to the difference. Whatever it is, there are areas (most of it) where it's impossible to even differentiate between slab and thinset, which is why I etched into the slab numerous times. It's just unreal. If there were an F5 tornado, nothing would be left, except for the slab.....with ugly ass tile on it. Lol
Sent from my SM-N900V using Tapatalk
Hit a little over 15k on BAD BETSY so thought will do a little preventative maintenance on her,removed both map sensors and air charge sensor,IAT and cleaned them up with some air mass cleaner,great and safe for electrical components and leaves no residue,car feels smoother with a little more PEP.
Your SHO's gonna have that Colgate smile, ZSHO :)
^Probably a pretty good idea, with all of the oils a junk making their way into the intake tract upstream of the sensors, from emissions control systems, and over oiled air filters. XD
Sent from my SM-N900V using Tapatalk
Quote from: SHOdded on September 11, 2014, 08:15:50 PM
Your SHO's gonna have that Colgate smile, ZSHO :)
With taxes and financing&interest,fees,extended warranty=50k,thats why my wife hates me,i spend more time with my car then her,lol ,so why not making her smile,which one? lol
A while back the map sensors CX-221&CX228,2bar&3bar were relatively evenly priced,as of late the 2-bar is a fraction of the cost of a 3-bar?
Quote from: ZSHO on September 14, 2014, 07:08:39 AM
leecox go to the introduction page and serup profile and some pics of the ride and WELCOME ABOARD THE ECOPOWER FORUM.
Am I missing something ?
I thought this was Ecoboost Performance Forum ...
Quote from: SwampRat on September 14, 2014, 01:22:20 PM
Quote from: ZSHO on September 14, 2014, 07:08:39 AM
leecox go to the introduction page and serup profile and some pics of the ride and WELCOME ABOARD THE ECOPOWER FORUM.
Am I missing something ?
I thought this was Ecoboost Performance Forum ...
Simply ZSHO's creative way of referencing the forum :)
In my area there very few SHO's but what caught my attention lately are the large amounts of X-SPORT in my area,maybe cause its twards the end of the year with good incentives,last year at the same dealer where i purchased my SHO the X-SPORT was going for close to 50k.
I'm proud to say I own the only 13 sho within a 100 mile radius of my town. But there are quite a few x-sports around.
http://www.audizine.com/forum/showthread.php?t=618933
That's hot....
Even the bmw guys bash gm. Hah.
http://www.m3forum.net/m3forum/showthread.php?t=489056
GM Recall/Stop-Sale thread of the day
Quote from: wasinger3000 on October 08, 2014, 11:11:30 AM
http://www.audizine.com/forum/showthread.php?t=618933
That's hot....
(http://tapatalk.imageshack.com/v2/14/10/08/7b902c26f68efe03fa9a8dffe692ff22.jpg)
(http://tapatalk.imageshack.com/v2/14/10/08/737879efc8afbe662d78bcae75a126da.jpg)
Rich
Those VW engines run so hot! I had a 02 Passat 1.8T that sludged up at 30K miles. I was the second owner, came off lease, so never had synthetic. Dealer replaced oil pump and other stuff under warranty. Then I chipped it and it still had major turbo lag. Traded it in for a new '06 GTO :D
Quote from: PokerMunkee on October 08, 2014, 12:39:14 PM
Those VW engines run so hot! I had a 02 Passat 1.8T that sludged up at 30K miles. I was the second owner, came off lease, so never had synthetic. Dealer replaced oil pump and other stuff under warranty. Then I chipped it and it still had major turbo lag. Traded it in for a new '06 GTO :D
That's a perfect storm for engine failure. Dyno oil on a cherry red turbo... I bet that oil lasts all of 1k miles. Do they all run that hot? I was considering an audi down the road but I don't want that kinda s*** going on.
Has anyone checked to see how hot our turbos are after a run to say 140. I'm sure there is some color to them. I've never had a problem with an Audi Turbo motor using synthetic oil
Quote from: panther427 on October 08, 2014, 01:57:46 PM
Has anyone checked to see how hot our turbos are after a run to say 140. I'm sure there is some color to them. I've never had a problem with an Audi Turbo motor using synthetic oil
I'll check on Friday. I'll do a before and after temp with pictures.
Has anyone ever used the tire sealer that comes in the PP kit?
Quote from: wasinger3000 on October 08, 2014, 01:59:09 PM
I'll check on Friday. I'll do a before and after temp with pictures.
With or without the engine cover?
Quote from: SHOdded on October 08, 2014, 03:13:16 PM
Quote from: wasinger3000 on October 08, 2014, 01:59:09 PM
I'll check on Friday. I'll do a before and after temp with pictures.
With or without the engine cover?
I'd prefer to do this once so I'll do it with the cover on for max heat.
I had an 1992 Audi s4 that had from the factory an external waste gate, engine oil cooler and water cooled Turbo. It took a very high speed run over 20 miles. It was glowing nicely when that run was done. Turbos when used do get to glowing to some degree rather quickly. Same with brake rotors. It's a fun trick to do the night before you change pads and rotors 5 or 6 80 to 0mph runs then hop out and take a look
I apologize if this was mentioned in the past,anyone consider painting the bottom skirt the same color of the car,best of my knowledge they have to use a special flex-all paint made for plastic,rubber,plexiglass,to hold up better and give our cars a bolder and fuller appearance especially the side and rear skirt to make it look more color coordinated.
Yay! (http://tapatalk.imageshack.com/v2/14/10/17/4adb8e56a725ed3e5f9865a5f01ea7c7.jpg)
So now Torque can tell when you are doing a wheelie?
Quote from: SHOdded on October 17, 2014, 11:36:54 PM
So now Torque can tell when you are doing a wheelie?
Wheelies....haha
Rich
How does that work? Can you toggle it with the rpm/fuel screens?
Which dealer enabled it for you?
I'm jelly!
Quote from: SHOdded on October 17, 2014, 11:36:54 PM
So now Torque can tell when you are doing a wheelie?
Hah. I was surprised how much of the power it actually puts to the rear on a lunch after watching it for awhile.
Quote from: PokerMunkee on October 18, 2014, 12:51:53 AM
How does that work? Can you toggle it with the rpm/fuel screens?
Which dealer enabled it for you?
I'm jelly!
Yeah its just one click after the rpm gauge. I really like it. Just I wish it was like the edge where it shows each individual wheel. None the less it's cool to know what it's actually doing.
Turned on the engine hours too. (http://tapatalk.imageshack.com/v2/14/10/17/f6145d87c834e2f4bad8453ddb94b1fa.jpg)
AWD Gauge demonstrated: http://youtu.be/GSz8OaivNQI
Quote from: ZSHO on October 17, 2014, 10:12:54 PM
I apologize if this was mentioned in the past,anyone consider painting the bottom skirt the same color of the car,best of my knowledge they have to use a special flex-all paint made for plastic,rubber,plexiglass,to hold up better and give our cars a bolder and fuller appearance especially the side and rear skirt to make it look more color coordinated.
Here's a link to a thread of a guy who did this on his Explorer. Maybe he could give you some more insight on this if you can get in touch with him
http://www.explorerforum.com/forums/showthread.php?t=406649 (http://www.explorerforum.com/forums/showthread.php?t=406649)
August is a year that i had the car,right before that submitted pictures of the tires and the condition of them,service advisor stated you still have a little bit more meat left buy look of the pics,and to call him in oct,called him yesterday and told him i want to go with 255-45-20,bit wider,he said which tire do you want to go with and will take it from there,my appt next friday,will see what happens,
Good luck with the tires, Z, post some pics along with your experience with them.
http://www.tirerack.com/tires/tires.jsp?tireMake=Goodyear&tireModel=Eagle+Sport+All-Season+%28W-Speed+Rated%29&partnum=545WR0SAS&vehicleSearch=false&fromCompare1=yes (http://www.tirerack.com/tires/tires.jsp?tireMake=Goodyear&tireModel=Eagle+Sport+All-Season+%28W-Speed+Rated%29&partnum=545WR0SAS&vehicleSearch=false&fromCompare1=yes) Any one install these tires on there vehicles,went with the 255-45-20.
Quote from: SHOdded on October 18, 2014, 08:49:15 AM
Good luck with the tires, Z, post some pics along with your experience with them.
Will do -MANU
(http://tapatalk.imageshack.com/v2/14/10/24/78eaf3f215bb5aad275ec6b84ed6188e.jpg)
Poor thing has been outside for 5 days now. Finally located a local front diff for the truck at almost half the price of others online. Time to put what I took apart back together and send it to my mechanic and free up the garage already.
Rich
The SHO is a brute, it can take it :)
Quote from: SHOdded on October 24, 2014, 10:55:48 AM
The SHO is a brute, it can take it :)
Notice the frost on roof across the street, brrrr. 36* this morning.
Rich
Finally got this sucker cleaned up a little. Now, to get it running better.
(http://img.photobucket.com/albums/v181/HiFiveRecognized/20141018_160712_zpsglawcnye.jpg) (http://smg.photobucket.com/user/HiFiveRecognized/media/20141018_160712_zpsglawcnye.jpg.html)
Sent from my SM-N900V using Tapatalk
Yesterday, in my search for the front diff on the truck I put in a parts request on one of those free part finders. Hour later I get a call back from a guy I can barely understand. He asks, for some weird reason, "how long have you been looking"? I reply not that long and I've been calling around locally today to locate one. He then wants make sure I realize they are not a junk yard, they are "advanced recyclers"...I literally laughed out loud and stopped him to ask if that's the new glamorous phrase for junk yard. He shrugs it off and starts listing the parts I'm actually looking at online already (exact same mileage on each part). After I choose the low miles part(that is already sold that I had gotten a price on earlier before they realized they didn't have it anymore) he throws out a price hundreds of dollars more than I got. So I call him out on not even being a "recycler" and the only thing he's doing is trying to rip me off for his "advanced" pocket lining. Quickly received the dial tone, some people.
Rich
C'mon, Rich, that guy's time must have been worth at least a couple of hundred bucks, easy ;)
(http://tapatalk.imageshack.com/v2/14/10/24/96011e719f9389bd3abe85771c2f2ef1.jpg)
It's nice having this only a mile away.
^^^^very nice
Rich
(http://tapatalk.imageshack.com/v2/14/10/26/63b092152484ff552e519d5b2208a3c1.jpg)
This may be the ugliest $500 I ever spent.
Rich
A little time with rust remover, wire wheel, paint and it just may look pretty again :)
I think it has an inner beauty!
As long as it works, I will find the beauty that is obviously hidden somewhere in there.
Chose to not sparkle it up, didn't want to make the surrounding parts feel bad.;)
Rich
LOL ...
(http://tapatalk.imageshack.com/v2/14/11/14/263818600da5eea85bf1692f37f2f4ed.jpg)
Notice the nice dent in the grille. This happened about a month ago now. No feathers, no fur, and no chipping of the paint leads me to believe someone kicked it in. Dent happens to fit the toe of my shoe perfectly....hmmmm
Rich
^Sonsabitches
Sent from my SM-N900V using Tapatalk
Whoa, that sucks, man! No call for that :chair:
You know, really would like to chalk it up to random object. But the looks of it just makes it fall under some a-hole that didn't appreciate me taking up a parking space at the back of the lot.
Rich
Is it fixable?
Quote from: SHOdded on November 14, 2014, 12:27:36 PM
Is it fixable?
I think so. The metal sheet used for the grille lining is pretty stout, but looks to be workable. I imagine the paint will chip pretty bad in the process though. Looks like a winter project as it sits.
On a better note, I have clearance from the "boss" to say, collect some parts after X-MAS!!!
Rich
Great news, Rich! The CIC giving the upgrade project a thumbs-up is a mighty big victory :)
For sure! One small tiny step in the automotive world, but one hugely massive step cleared for one lucky guy!!!
Rich
Sitting in my car listening to music while I wait for the leonid meteor shower to start. Love watching the stars...
Telescopically or naked eye?
Quote from: SHOdded on November 18, 2014, 04:21:21 AM
Telescopically or naked eye?
Just my eyes. They were to far spread out for any magnification. Put about 3 idle hours on the car, :o
First Contact ;)
Looking outside at the ICE on the fence,Wondering why it is 18 Deg. Out in Columbus
OHIO on Nov 18, with a wind chill of 11 @ 1.30 in the afternoon...This Just Sucks ??? :(
Gotta say, it is very pretty here for a below freezing day! Sunny, no ice/snow.
...
Funny!
Just watched an Unleashed tuned viper,on "That Racing Channel", getting it!
Rich
Loving these gas prices
^^ Wow that's gotta be nice. We're still at 2.89, I'm paying 3.29 for 91 non ethanol...
Sent from my iPhone using Tapatalk
Must be nice seeing green grass! :/
Direct port injection meth kit on my friend's 2014 Silverado twin turbo . Thought it looked cool . Can't wait to see how it runs with adding meth .
Wow that is beautiful!
http://www188.carbuzz.com/news/2014/9/19/Ford-Wants-to-License-its-Police-Interceptor-Tech-to-Competitors-7722694/ (http://www188.carbuzz.com/news/2014/9/19/Ford-Wants-to-License-its-Police-Interceptor-Tech-to-Competitors-7722694/)
for the Leo and no leo in the forum
I wanted a pair of upgraded turbos for christmas,but prefer this set. http://thethrottle.thechive.com/2014/12/15/more-than-2-wheels-for-your-holiday-4-photos/ (http://thethrottle.thechive.com/2014/12/15/more-than-2-wheels-for-your-holiday-4-photos/) Happy holidays.
Good idea to license the tech! And Z, we need more closeups of the bike please ;)
Like many of us went to grab some last Christmas items the very last minute today,with mother nature bringing all the rain to us,it was a little challenging but still loved driving in the rain,finally came home and rushed to bring the items inside while raining,few minutes later realized forgot something in the car,and noticed the two front door windows and sunroof was open,that was a nice Christmas present for me,****happens.
Ugh! Need to put up a canopy ;)
Quote from: ZSHO on December 18, 2014, 10:16:58 PM
I wanted a pair of upgraded turbos for christmas,but prefer this set. http://thethrottle.thechive.com/2014/12/15/more-than-2-wheels-for-your-holiday-4-photos/ (http://thethrottle.thechive.com/2014/12/15/more-than-2-wheels-for-your-holiday-4-photos/) Happy holidays.
Sweet turbos there for sure!, but the red cloth support system won't go with my color scheme :P
Tuning without voiding warranty is possible... Not as hot, but you decide. From Ford Racing:
http://blog.caranddriver.com/the-boost-is-on-ford-racing-offering-ecoboost-reflashes-that-wont-kill-your-warranty/ (http://blog.caranddriver.com/the-boost-is-on-ford-racing-offering-ecoboost-reflashes-that-wont-kill-your-warranty/)
Quote from: BiGMaC on December 24, 2014, 11:03:31 AM
Quote from: ZSHO on December 18, 2014, 10:16:58 PM
I wanted a pair of upgraded turbos for christmas,but prefer this set. http://thethrottle.thechive.com/2014/12/15/more-than-2-wheels-for-your-holiday-4-photos/ (http://thethrottle.thechive.com/2014/12/15/more-than-2-wheels-for-your-holiday-4-photos/) Happy holidays.
Sweet turbos there for sure!, but the red cloth support system won't go with my color scheme :P
Cant beat these turbo's,MERRY CHRISTMAS TOM.https://chivethethrottle.files.wordpress.com/2014/12/c-mas-girl-550-3.jpg?w=1116&h=1110
。 ° · 。 · ˚ ˚ ˛ ˚ ˛
。° 。 ° 。˚ ˛ · ˚ ˚ ˛
★MERRY★ 。 · ˚ ˚ ˛
。CHRISTMAS 。 。°
_Π__ 。 ˚ ˚ ˛ ˚ ˛
/_____/ \。˚ ˚ ˛ ˚
l田田田 |門| ˚ ˛ ˚ ˛ ·
Happy Holidays and Merry Christmas to all!
Wife's birthday is today... all the kids and significant others arriving now for that and staying through Christmas... so you get a break from me for a couple of days!
Many happy returns of the day to the CIC, BiGMaC, and happy holidays to our membership :thumb: def take the time to take it slow ...
Quote from: BiGMaC on December 24, 2014, 01:49:56 PM
。 ° · 。 · ˚ ˚ ˛ ˚ ˛
。° 。 ° 。˚ ˛ · ˚ ˚ ˛
★MERRY★ 。 · ˚ ˚ ˛
。CHRISTMAS 。 。°
_Π__ 。 ˚ ˚ ˛ ˚ ˛
/_____/ \。˚ ˚ ˛ ˚
l田田田 |門| ˚ ˛ ˚ ˛ ·
Happy Holidays and Merry Christmas to all!
Wife's birthday is today... all the kids and significant others arriving now for that and staying through Christmas... so you get a break from me for a couple of days!
Happy birthday to the Misses,and wishing you and yours a Merry joyful Christmas. :bday:
I dropped of my car at the dealer for the updated valve cover gaskets and updated pvc system,have good relations there so they supplied me with a nice new MKZ,must admit to all the MKZ members here that the car really impressed me with its featues like no shift handle,everything is push button,and the large moonroof.
Got to try out the "competition" :D Great way to do it!
Installed the new updated valve cover and updated crankcase vent oil separator,found oil in accumulation in left hand valve cover baffle,stated by tech the new parts will slightly help any oil migrating similar to a catch can.
Good luck!
Me and the SHO are tired of winter already.
(http://i1249.photobucket.com/albums/hh507/pokermunkee/SHO/SHO-Snow_zpsa85fca99.jpg)
Still looking great though! Nice thermal impressions on the hood there :)
Quote from: SHOdded on January 02, 2015, 01:16:14 AM
Still looking great though! Nice thermal impressions on the hood there :)
You see the heat generating through the rear of the hood making the snow melt,on Monkees car,same also for SHOnUup a while back,so there is more heat generated in the rear of the engine.
I am curious to see on the XSPORT if the snow melts while the car is running on the rear of the hood,same as the SHO does,cause there is a couple of conclusions pertaining to the heat of the engine generating more twards the rear of the engine,magority of the SHO the rear valve cover need replacing than the front,on the XSPORT its more common for the front valve cover to need replacing than the rear,if also someone with an XSPORT can produce a pic for us,to determine that theory,correct me if i am wrong,thanks.
I can try. Problem is I park inside my garage and it's so freaking cold outside (4°) I'm not really one to stand outside and look at my warm car lol. If the right scenario presents itself, I will snap a pic and post it up
Sent from my iPad using Tapatalk
Couple thoughts. Heat rises. Back of the hood gis taller. More insulation on the middle of the hood
Someone a while back wanted to know if there was a cross drilled pisto on the performance package SHO,and ran across this article http://www.motortrend.com/roadtests/sedans/1205_2013_ford_taurus_sho_performance_package_first_test/photo_05.html (http://www.motortrend.com/roadtests/sedans/1205_2013_ford_taurus_sho_performance_package_first_test/photo_05.html)
I believe that is the article that sold me on the PP. It was PP or die when I was SHOpping.
One of the most interesting aspects of that article is the specs provided for the PTU cooling - less 75 degrees, compared to the non cooled unit. Not bad!
Another invention idea...
Heated wheel wells for the Uber luxury rides in cold climates. No more kicking ice!!!
Rich
I'd settle for a way to clean the backup camera. Totally worthless after driving in the snow. I see the '16 Explorer will have it, but why so long for someone to do this?
Quote from: PokerMunkee on January 08, 2015, 05:44:11 PM
I'd settle for a way to clean the backup camera. Totally worthless after driving in the snow. I see the '16 Explorer will have it, but why so long for someone to do this?
Can't remember who it was but I know some auto makers put a washer jet in front of the camera. It's odd how long it takes for tech to be adopted. Just like back up cameras used to be far and few. Now it's standard on almost everything.
Hyundai backup cameras are hideaway. When you select reverse, it flips out. And then select out of reverse and it hides again. Not sure how long that'll last though. It suck if that mechanism/motor failed. Lol
https://www.youtube.com/watch?v=eq05bNUaBnU (https://www.youtube.com/watch?v=eq05bNUaBnU)
A member was inquiring about a Diablo tune a while back,as a Amazon prime guy,ran into it today,clearly had bad reviews,glad to see that he opted out http://www.amazon.com/DiabloSport-I1000-inTune-Vehicle-Programmer/dp/B0064IU5FW/ref=sr_1_1?s=automotive&ie=UTF8&qid=1420823839&vehicle=2013-54-697-732--1-6-6-19548-2173-1-1-2832--4-0&sr=1-1&ymm=2013%3Aford%3Ataurus (http://www.amazon.com/DiabloSport-I1000-inTune-Vehicle-Programmer/dp/B0064IU5FW/ref=sr_1_1?s=automotive&ie=UTF8&qid=1420823839&vehicle=2013-54-697-732--1-6-6-19548-2173-1-1-2832--4-0&sr=1-1&ymm=2013%3Aford%3Ataurus) ,glad to see that he went with LME OR Torrie.
Quote from: panther427 on January 09, 2015, 03:21:23 PM
https://www.youtube.com/watch?v=eq05bNUaBnU (https://www.youtube.com/watch?v=eq05bNUaBnU)
Fun show, great watch! Think a spoiler on the roof would've helped mileage significantly?
Check out what car is on the main page... http://www.zeroto60times.com/ (http://www.zeroto60times.com/)
Edit: it was a SHO.
Quote from: wasinger3000 on January 12, 2015, 01:03:16 AM
Check out what car is on the main page... http://www.zeroto60times.com/ (http://www.zeroto60times.com/)
On the 0-60 topic.
Wallaceracing.com has an easy 0-60 calculator based off of 1/8 mile time and speed. Has my best trip to the track at a 3.8. Not bad for a 4 door family sedan...lol
Rich
The 4's are well-cracked :)
http://jalopnik.com/ford-gt-this-is-it-1678893649?rev=1421073124631
Newest member of the ecoboost platform!!!
Rich
Quote from: SHOnUup on January 12, 2015, 10:03:53 AM
http://jalopnik.com/ford-gt-this-is-it-1678893649?rev=1421073124631
Newest member of the ecoboost platform!!!
Rich
That's awsome! Now all we need are more aftermarket parts. Like a HPFP!!! This could be good.
Quote from: wasinger3000 on January 12, 2015, 11:12:48 AM
Quote from: SHOnUup on January 12, 2015, 10:03:53 AM
http://jalopnik.com/ford-gt-this-is-it-1678893649?rev=1421073124631
Newest member of the ecoboost platform!!!
Rich
That's awsome! Now all we need are more aftermarket parts. Like a HPFP!!! This could be good.
Those were my first thoughts..."what can we scavenge from this thing"...lol
Rich
Quote from: SHOnUup on January 12, 2015, 11:17:53 AM
Quote from: wasinger3000 on January 12, 2015, 11:12:48 AM
Quote from: SHOnUup on January 12, 2015, 10:03:53 AM
http://jalopnik.com/ford-gt-this-is-it-1678893649?rev=1421073124631
Newest member of the ecoboost platform!!!
Rich
That's awsome! Now all we need are more aftermarket parts. Like a HPFP!!! This could be good.
Those were my first thoughts..."what can we scavenge from this thing"...lol
Rich
Can't wait till torrie gets his hands on one.
This thing is going to destroy the vet/viper world.
Wonder what it would cost for the motor out of one..
"The GT is one of more than 12 new Ford Performance vehicles coming by 2020. It joins Focus RS, F-150 Raptor, Shelby GT350 and Shelby GT350R in the growing Ford Performance lineup."
If the RS is as nice as it sounds I think it will be my next car.
" The GT features an all-new, port/direct dual fuel-injection setup to improve engine response, plus a low-friction roller-finger-follower valvetrain. The twin-turbocharged EcoBoost V6 will be paired with a seven-speed dual-clutch transaxle for near-instantaneous gear changes and exceptional driver control."
Sounds like a Euro-challenger for sure. A true DCT will hopefully filter on down to "lower"-end vehicles soon!
An automobilia site I ran across with a couple of articles on DI tech:
http://www.autospeed.com/cms/article.html?&A=1761 (http://www.autospeed.com/cms/article.html?&A=1761)
http://www.autospeed.com/cms/article.html?&A=107830 (http://www.autospeed.com/cms/article.html?&A=107830)
Anyone know how many current Gen SHO's have been built?
Nope, but have you got your car to a 1/4 track yet???
I'm in need of a new propane grill. Looking at Weber, but it'd be great to spend a little less and still get a solid grill. So, I have also considered DynaGlo, which seem to be well made and decently reviewed. And cheaper of course.
Anybody have any input?
Quote from: IHeartGroceries on January 16, 2015, 08:21:17 PM
I'm in need of a new propane grill. Looking at Weber, but it'd be great to spend a little less and still get a solid grill. So, I have also considered DynaGlo, which seem to be well made and decently reviewed. And cheaper of course.
Anybody have any input?
If you do go with a cheaper grille, check for replacement parts. Sometimes they're outrageous, or can't be found. Weber is great, I've seen many old ones working great. Our main grille is a mid-grade Char-Broil that isn't very good. Uneven heat and frame twists easy making the doors tight.
Rich
Quote from: PokerMunkee on January 16, 2015, 04:50:44 PM
Nope, but have you got your car to a 1/4 track yet???
I'm going to in march when the track opens. Might haul it there with the new truck too.
You ever get your exhaust put on?
Quote from: IHeartGroceries on January 16, 2015, 08:21:17 PM
I'm in need of a new propane grill. Looking at Weber, but it'd be great to spend a little less and still get a solid grill. So, I have also considered DynaGlo, which seem to be well made and decently reviewed. And cheaper of course.
Anybody have any input?
I have had two Weber gas grills in the last 20 years... both still like new (son has the older one now)... We cook out a lot (2-4x/week) so we really use them!... like even now clear blue skies and 75 degrees They cook great and Home Depot stocks all the parts. I have owned a couple of high end grills that cost 2-4x as much, but compared to the Weber they're fertilizer! I'll never own another brand.
My $0.02
haha... this is going to be every Hellcat driver at every stop light.
https://www.youtube.com/watch?x-yt-ts=1421782837&v=kG6veF_34QE&x-yt-cl=84359240 (https://www.youtube.com/watch?x-yt-ts=1421782837&v=kG6veF_34QE&x-yt-cl=84359240)
Silent, but deadly Tesla. That's fast for an electric job.
Quote from: wasinger3000 on January 20, 2015, 10:06:49 PM
haha... this is going to be ever Hellcat driver at every stop light.
https://www.youtube.com/watch?x-yt-ts=1421782837&v=kG6veF_34QE&x-yt-cl=84359240 (https://www.youtube.com/watch?x-yt-ts=1421782837&v=kG6veF_34QE&x-yt-cl=84359240)
Same thing I thought...lol
There's a video of a stock one losing the driveshaft at launch too.
Rich
Quote from: SHOnUup on January 20, 2015, 10:45:42 PM
Quote from: wasinger3000 on January 20, 2015, 10:06:49 PM
haha... this is going to be ever Hellcat driver at every stop light.
https://www.youtube.com/watch?x-yt-ts=1421782837&v=kG6veF_34QE&x-yt-cl=84359240 (https://www.youtube.com/watch?x-yt-ts=1421782837&v=kG6veF_34QE&x-yt-cl=84359240)
Same thing I thought...lol
There's a video of a stock one losing the driveshaft at launch too.
Rich
Granted the guy driving is an idiot.. just think of how many more idiots will take these out and crash them. All it takes is one punch to the floor when trying to pass a car and you are done.
I'm not worried about beating one from a stop. They will take some decent skill to hook at a stop light.
I'm with ya...700 HP to anyone over 16 that can afford it. Almost sounds criminal.
Rich
Wow, the Charger driver had to be super embarrassed with all eyes on him. lol.
Lol yeah... I'm kind of wondering if the stock tires are really just that bad or if it's just that much of a beast. Either way that is a bad combo for anyone on the street.
Insurance on those is going to be painful.
Looks like the 2016 Explorer retains the 3.5EB from this newsletter I got yesterday:
http://www.ford.com/suvs/explorer/2016/reveal/ (http://www.ford.com/suvs/explorer/2016/reveal/)
Win an all-new 2015 F150:
http://fordvehicles.emipowered.net/profootball2014/ (http://fordvehicles.emipowered.net/profootball2014/)
manu:
what i'd like to know is where they got the extra 15hp to make the lincoln navigator 380hp? left the expedition 365hp but upped the lincoln. saw a black one recently & at first didn't know what it was. it was huge!!!
I guess the insurance company ok'd the extra power for the Lincoln label :)
Looks like FordTechMakuloco's Ford related videos have been pulled. No longer available on YouTube.
Quote from: SHOdded on January 28, 2015, 08:49:18 AM
Looks like FordTechMakuloco's Ford related videos have been pulled. No longer available on YouTube.
I wondered when this was going to happen. His little videos are insightful, but Ford couldn't be to pleased with one of their own pointing out the flaws in the design.
Rich
Too true! They must be reviewing them, because some of the videos were simple How-To's like changing spark plugs on the 3.5 engine.
Yup, couple key phrases got him I think...like, Ford knows of this issue but there isn't a fix yet...and, the ones where he reveals that cars coming in for certain TSB'S or recalls were getting this "extra" stuff done to all of them.
Rich
Quote from: SHOdded on January 23, 2015, 06:15:45 AM
Looks like the 2016 Explorer retains the 3.5EB from this newsletter I got yesterday:
http://www.ford.com/suvs/explorer/2016/reveal/ (http://www.ford.com/suvs/explorer/2016/reveal/)
Win an all-new 2015 F150:
http://fordvehicles.emipowered.net/profootball2014/ (http://fordvehicles.emipowered.net/profootball2014/)
So what does this play with some people stating there will not be a 3.5 EB for the Taurus - the Explorer uses virtually the same engine no? Transverse mounted 3.5EB? Unless the rumored "stretched Fusion" platform is too small. I really hope they unveil the new Taurus at the Chicago Auto-Show I am jonesing a new Mustang, but REALLY love the 4dr performance sedan that is the SHO.....
Wife's 2007 Durango just got rear ended by a 2006 Chrysler 300. His car is a total loss, will post pic later. Sonofabitch! Was about to trade this thing in or a new Yukon/Tahoe. Don't think it will be totaled, bummer. At least the kiddos weren't in the car. Police officer told her the car seats need to be replaced.
Anyone dealt with diminished value before? How exactly does that work?
(http://i1249.photobucket.com/albums/hh507/pokermunkee/durango/Durango-Damage_zps6ea8f5f1.jpg)
Did any air bags deploy? Possible chance of it being totalled. You have to use there insurance company to give You the money for reduced value
How's the wife? Hope she is well!
How fast was the 300 goin?
Sorry to see this, PM! Hope the wife is OK! Yeah, def get full replacement value, nothing less.
Quote from: PokerMunkee on January 29, 2015, 03:02:25 PM
Wife's 2007 Durango just got rear ended by a 2006 Chrysler 300. His car is a total loss, will post pic later. Sonofabitch! Was about to trade this thing in or a new Yukon/Tahoe. Don't think it will be totaled, bummer. At least the kiddos weren't in the car. Police officer told her the car seats need to be replaced.
Anyone dealt with diminished value before? How exactly does that work?
(http://i1249.photobucket.com/albums/hh507/pokermunkee/durango/Durango-Damage_zps6ea8f5f1.jpg)
Glad to hear no one was hurt. Best of luck getting some value out of it.
Rich
Quote from: PokerMunkee on January 29, 2015, 03:02:25 PM
Wife's 2007 Durango just got rear ended by a 2006 Chrysler 300. His car is a total loss, will post pic later. Sonofabitch! Was about to trade this thing in or a new Yukon/Tahoe. Don't think it will be totaled, bummer. At least the kiddos weren't in the car. Police officer told her the car seats need to be replaced.
Anyone dealt with diminished value before? How exactly does that work?
(http://i1249.photobucket.com/albums/hh507/pokermunkee/durango/Durango-Damage_zps6ea8f5f1.jpg)
Diminished value laws vary state to state. You'll need to learn how the laws apply in your state of residence. Or just contact the insurer I guess.
It's at the body shop. Trying to get a new Yukon/Tahoe as a rental. The owner is our neighbor so they gave us a 2002 Tahoe to drive for now until the Chrysler 300's insurance company authorizes the rental car (1 or 2 days).
Wife was a stop light when he hit her, probably on the phone. He tried to swerve to miss her but failed. Got a ticket and he only has liability, bad day for him! At least it's only a V6 300 lol.
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10945528_10153046491919985_2056951653272379210_n.jpg?oh=44e67998430197554e70c42f02540027&oe=555A8BBE&__gda__=1432865217_3874950114c90024c4963440667570e4)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10943640_10153046491774985_7285335641720497509_n.jpg?oh=7d85b4b7074f79e088396d2c6211aea2&oe=555E6725&__gda__=1428330330_02401098ee538adfa3cec58c3df14324)
Yikes!
Hope everything is well,thank god nobody was seriously hurt,any children inside the truck.
The FordTechMakuloco web content is back up:
https://www.youtube.com/user/FordTechMakuloco/videos (https://www.youtube.com/user/FordTechMakuloco/videos)
Thought this was kinda cool. Found it in the truck behind the dash. (http://tapatalk.imageshack.com/v2/15/01/29/3c1abb4053434b296f11d7358fc15604.jpg)
Quote from: wasinger3000 on January 29, 2015, 10:28:15 PM
Thought this was kinda cool. Found it in the truck behind the dash. (http://tapatalk.imageshack.com/v2/15/01/29/3c1abb4053434b296f11d7358fc15604.jpg)
Kinda like an Easter Egg in a computer operating system... They are cool. I have seen a few, but if I have one in my ride it's still hiding!
Quote from: BiGMaC on January 29, 2015, 11:41:49 PM
Quote from: wasinger3000 on January 29, 2015, 10:28:15 PM
Thought this was kinda cool. Found it in the truck behind the dash. (http://tapatalk.imageshack.com/v2/15/01/29/3c1abb4053434b296f11d7358fc15604.jpg)
Kinda like an Easter Egg in a computer operating system... They are cool. I have seen a few, but if I have one in my ride it's still hiding!
Oh yeah I forgot you bought a 15 as well. How do you like it? Are you in love with the way the doors close like I am? It's amazing. Any pics?
Quote from: wasinger3000 on January 30, 2015, 12:17:50 AM
Quote from: BiGMaC on January 29, 2015, 11:41:49 PM
Quote from: wasinger3000 on January 29, 2015, 10:28:15 PM
Thought this was kinda cool. Found it in the truck behind the dash. (http://tapatalk.imageshack.com/v2/15/01/29/3c1abb4053434b296f11d7358fc15604.jpg)
Kinda like an Easter Egg in a computer operating system... They are cool. I have seen a few, but if I have one in my ride it's still hiding!
Oh yeah I forgot you bought a 15 as well. How do you like it? Are you in love with the way the doors close like I am? It's amazing. Any pics?
Must have me confused with some really lucky guy! ... When I hit the lottery I'll buy a new DD SHO and then go crazy on this one!
Quote from: BiGMaC on January 30, 2015, 01:13:19 AM
Quote from: wasinger3000 on January 30, 2015, 12:17:50 AM
Quote from: BiGMaC on January 29, 2015, 11:41:49 PM
Quote from: wasinger3000 on January 29, 2015, 10:28:15 PM
Thought this was kinda cool. Found it in the truck behind the dash. (http://tapatalk.imageshack.com/v2/15/01/29/3c1abb4053434b296f11d7358fc15604.jpg)
Kinda like an Easter Egg in a computer operating system... They are cool. I have seen a few, but if I have one in my ride it's still hiding!
Oh yeah I forgot you bought a 15 as well. How do you like it? Are you in love with the way the doors close like I am? It's amazing. Any pics?
Must have me confused with some really lucky guy! ... When I hit the lottery I'll buy a new DD SHO and then go crazy on this one!
Damn.. lol. I know someone else on here bought a new truck and I though manu said you did. Well.. sorry bout that.
I did say you are in good company with BiGMaC, didn't I? Sorry for the confusion, simply meant both of you have a '13 SHO and a nice Ford rig!
Quote from: SHOdded on January 30, 2015, 05:17:30 AM
I did say you are in good company with BiGMaC, didn't I? Sorry for the confusion, simply meant both of you have a '13 SHO and a nice Ford rig!
Ahhhh see. It's my failure to read between the lines that made me look stupid.. hah. Well the interent will forever encapsulate this moment for me..
Quote from: SHOdded on January 30, 2015, 05:17:30 AM
I did say you are in good company with BiGMaC, didn't I? Sorry for the confusion, simply meant both of you have a '13 SHO and a nice Ford rig!
Long live the 3.5 GDI TT!
Well then.... not sure if I like it over my beloved E63 S AMG but... it looks good and I'd probably drive one. Maybe.... idk. Can't bring myself to the GM side that easy.. http://m.caranddriver.com/features/2016-cadillac-cts-v-in-depth-with-the-four-door-corvette-feature
"Muffler bypass" aka cutouts?
Quote from: wasinger3000 on January 30, 2015, 10:04:48 AM
Well then.... not sure if I like it over my beloved E63 S AMG but... it looks good and I'd probably drive one. Maybe.... idk. Can't bring myself to the GM side that easy.. http://m.caranddriver.com/features/2016-cadillac-cts-v-in-depth-with-the-four-door-corvette-feature
I'm trying to stay true to Ford, but that new CTS V might be enough to pull me to the dark side. It's either keep the SHO and pickup a 13/14 Shelby or trade in the SHO and roll a CTS V for both work and play. Waiting to see what the pricing of the Caddy is going to be.
Quote from: Wilson on January 30, 2015, 04:02:12 PM
Quote from: wasinger3000 on January 30, 2015, 10:04:48 AM
Well then.... not sure if I like it over my beloved E63 S AMG but... it looks good and I'd probably drive one. Maybe.... idk. Can't bring myself to the GM side that easy.. http://m.caranddriver.com/features/2016-cadillac-cts-v-in-depth-with-the-four-door-corvette-feature (http://m.caranddriver.com/features/2016-cadillac-cts-v-in-depth-with-the-four-door-corvette-feature)
I'm trying to stay true to Ford, but that new CTS V might be enough to pull me to the dark side. It's either keep the SHO and pickup a 13/14 Shelby or trade in the SHO and roll a CTS V for both work and play. Waiting to see what the pricing of the Caddy is going to be.
The V is a great car (albeit not as comfortable as the SHO IMHO)...BUT if you can get a real Shelby... especially with Caroll just dying... sweet!
$85,000 plugnplay for the V.
Yeah..... not sure if any US made car is worth 85k. Only exception being the Ford GT.
Maybe a used E63 would be my choice over the CTS. AWD will always win in my book.
That and a twin turbo handcrafted 5.5L is far more attractive than a supercharged GM motor.
My brother has a 09 c63 amg and that thing is wild. Def a looker as well
Quote from: s1krr on January 30, 2015, 05:28:44 PM
My brother has a 09 c63 amg and that thing is wild. Def a looker as well
I like the c63 as well but it's a different animal compared to the E63 S. 0-60 in 3.7 without brake boosting.
Damn, 85k? Yeah that's a little strong. For that price I'd much rather have an E63 over the V. Can't believe they went up 20k on the price since the last version.
No more bailout?
So im kind of in love with the Tesla P85D... 0-60 in 3.2, 691 hp, all kind of cool tech i could fap with for days... and its cheaper than my beloved E63 S AMG....
http://my.teslamotors.com/models/design (http://my.teslamotors.com/models/design)
http://www.roadandtrack.com/new-cars/news/a6358/first-look-tesla-model-s-p85d-dual-motor/ (http://www.roadandtrack.com/new-cars/news/a6358/first-look-tesla-model-s-p85d-dual-motor/)
http://www.roadandtrack.com/car-culture/entertainment/videos/a24870/tesla-model-s-p85d-insane-mode-makes-people-lose-their-minds/ (http://www.roadandtrack.com/car-culture/entertainment/videos/a24870/tesla-model-s-p85d-insane-mode-makes-people-lose-their-minds/)
Tesla does the 1/4 in high 11's right?
Wonder what type of mods are available because it looks like top end gets shafted a bit with that great 0-60.
Rich
Got a 2015 Suburban LT 4X4 for a rental car. Damn, I love this thing! So big and comfty. Rides like a Cadillac compared to the 2007 Durango.
Quote from: wasinger3000 on February 02, 2015, 08:14:17 PM
So im kind of in love with the Tesla P85D... 0-60 in 3.2, 691 hp, all kind of cool tech i could fap with for days... and its cheaper than my beloved E63 S AMG....
http://my.teslamotors.com/models/design (http://my.teslamotors.com/models/design)
http://www.roadandtrack.com/new-cars/news/a6358/first-look-tesla-model-s-p85d-dual-motor/ (http://www.roadandtrack.com/new-cars/news/a6358/first-look-tesla-model-s-p85d-dual-motor/)
http://www.roadandtrack.com/car-culture/entertainment/videos/a24870/tesla-model-s-p85d-insane-mode-makes-people-lose-their-minds/ (http://www.roadandtrack.com/car-culture/entertainment/videos/a24870/tesla-model-s-p85d-insane-mode-makes-people-lose-their-minds/)
Little more speed.
http://m.motortrend.com/wot/1501_tesla_model_s_p85d_acceleration_to_improve_with_software_update.html??adbid=10152745492931312&adbpl=fb&adbpr=18332466311&sm_id=social_aumomotortrendhub_MotorTrend_20150202_39795367
Rich
wash:
They had a couple of them at our car show. Looked really well made, just a might plain of course with no engine & them not showing the batteries could account for it. but it's an amazing car that's for sure. nothing i'd buy as i like some noise from my car, but is for sure the future.
Started a trial run with Lubegard Fuel Booster in the Edge today. Anyone here give it a go yet?
All white but still the Odd man out, but there are some eco boosted vehicles in there
(http://tapatalk.imageshack.com/v2/15/02/04/0706bd16e70e78e3cf16763770181db9.jpg)(http://tapatalk.imageshack.com/v2/15/02/04/cfc7a16b8927954101e94af876f92089.jpg)
Sent from my iPad using Tapatalk
Cool story, also cool they gave him a taurus but i would of thought they would give him an awd version because of the snow... Unless i missed the awd badge. http://www.myfoxtampabay.com/story/28045659/man-who-walks-21-miles-to-work-surprised-with-new-car (http://www.myfoxtampabay.com/story/28045659/man-who-walks-21-miles-to-work-surprised-with-new-car)
It has the optional wheels the SHO has. Isn't it AWD?
Nevermind, those wheels are optional on FWD as well.
That's a sharp looking Taurus. Good publicity for Ford, some people will give the Taurus a look now.
That's awesome. Hope he enjoys his new car as much as we all enjoy ours.
For transmissions without a serviceable filter, 30K fluid exchange intervals are recommended:
http://www.youtube.com/watch?v=Nse_z9RmPcQ#ws (http://www.youtube.com/watch?v=Nse_z9RmPcQ#ws)
Quote from: SHOdded on February 08, 2015, 07:45:21 AM
For transmissions without a serviceable filter, 30K fluid exchange intervals are recommended:
http://www.youtube.com/watch?v=Nse_z9RmPcQ#ws (http://www.youtube.com/watch?v=Nse_z9RmPcQ#ws)
TRUE to that,guess thats why they dont recommend changing the original fluid if you exceeded more than 60k on it.
Anybody point me in the right direction to pick up a little knowledge about cold start and warm up, open loop and closed loop, and how O2 sensors are in play for that warm up period?
Quote from: SHOdded on February 08, 2015, 07:45:21 AM
For transmissions without a serviceable filter, 30K fluid exchange intervals are recommended:
http://www.youtube.com/watch?v=Nse_z9RmPcQ#ws (http://www.youtube.com/watch?v=Nse_z9RmPcQ#ws)
Good video. Glad you found it. I'll have to look into it on mine. Wonder if that could be part of my issue. Is there any upgrade oil that we can use on our cars? Or should be stick with the ford oil?
I think service interval is key, appropriate for your driving habits. With performance cars, driven in that style, I feel it is better to stick to severe duty intervals rather than "normal". If you do that, the Ford fluids should be just fine, though you can certainly upgrade if you so desire. Full synthetic is preferred pretty much across the board for all the fluids. One addendum: brake fluid is not mentioned at all that I can see in Ford's services, but flushing it regularly would be good too, say, every time you change pads/rotors.
Quote from: Larrylu on February 09, 2015, 08:49:58 AM
Anybody point me in the right direction to pick up a little knowledge about cold start and warm up, open loop and closed loop, and how O2 sensors are in play for that warm up period?
For a quick definition:
http://www.modularfords.com/threads/58339-Definition-of-Closed-Loop-vs-Open-Loop?p=610557 (http://www.modularfords.com/threads/58339-Definition-of-Closed-Loop-vs-Open-Loop?p=610557)
Bike-related post, but still the basics apply:
http://bikeboy.org/open_closed_loop_efi.html (http://bikeboy.org/open_closed_loop_efi.html)
Thanks for the leads. I will follow up.
Very interesting and educational. I'm thinking this is playing a part in my ongoing KR spike issue. Thanks again for the tip!
Quote from: SHOdded on February 09, 2015, 09:43:12 AM
I think service interval is key, appropriate for your driving habits. With performance cars, driven in that style, I feel it is better to stick to severe duty intervals rather than "normal". If you do that, the Ford fluids should be just fine, though you can certainly upgrade if you so desire. Full synthetic is preferred pretty much across the board for all the fluids. One addendum: brake fluid is not mentioned at all that I can see in Ford's services, but flushing it regularly would be good too, say, every time you change pads/rotors.
Quote from: Larrylu on February 09, 2015, 08:49:58 AM
Anybody point me in the right direction to pick up a little knowledge about cold start and warm up, open loop and closed loop, and how O2 sensors are in play for that warm up period?
For a quick definition:
http://www.modularfords.com/threads/58339-Definition-of-Closed-Loop-vs-Open-Loop?p=610557 (http://www.modularfords.com/threads/58339-Definition-of-Closed-Loop-vs-Open-Loop?p=610557)
Bike-related post, but still the basics apply:
http://bikeboy.org/open_closed_loop_efi.html (http://bikeboy.org/open_closed_loop_efi.html)
I'm looking at redline, royal purple and mobile 1 as a replacement. Do you know how to find out what transmission I have? The manual has specs for 3 different transmissions. No numbers on the fill cap maybe on the Trans case.
Pretty sure our trans is the 6f55
Rich
I have always liked Castrol for oil/trans fluid, some of the best around, if you want to throw that into the mix ;)
I am basically refering to the owners manuel which says to use M.C mercon LV fluid,11.6 quarts for the 6F55 transmission,rear differential (AWD)Fluid M.C SAE 80w-90 2.4 pints,Power transfer unit (PTU)M.C SAE 75W-140 synthetic rear axle lubricant 18 ounces,based on 13 SHO manuel.
After reading into it more I think I'm just going to drain out what I can and put Mercon LV back in since I don't know if redline will mix with it.
So far redline D6 ATF is the only one that says it's "suitable" for Mercon LV replacement. What ever that means...
In case you are worried that the Mercon LV is looking dirty:
https://www.youtube.com/watch?v=JUBoXyQ7UDQ (https://www.youtube.com/watch?v=JUBoXyQ7UDQ)
Alternatives to Motorcraft:
http://www.redlineoil.com/product.aspx?product=30704 (http://www.redlineoil.com/product.aspx?product=30704)
http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-fuel-efficient-synthetic-automatic-transmission-fluid/?code=ATLQT-EA (http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-fuel-efficient-synthetic-automatic-transmission-fluid/?code=ATLQT-EA)
http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/oe-fuel-efficient-synthetic-automatic-transmission-fluid/?code=OTLQT-EA (http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/oe-fuel-efficient-synthetic-automatic-transmission-fluid/?code=OTLQT-EA)
http://www.valvoline.com/products/consumer-products/automatic-transmission-products/automatic-transmission-fluid/37 (http://www.valvoline.com/products/consumer-products/automatic-transmission-products/automatic-transmission-fluid/37)
http://www.castrol.com/en_au/australia/products/cars/automatic-transmission-fluids/transmax-dexron.html (http://www.castrol.com/en_au/australia/products/cars/automatic-transmission-fluids/transmax-dexron.html)
Need more? :D
Quote from: SHOdded on February 09, 2015, 03:55:27 PM
In case you are worried that the Mercon LV is looking dirty:
https://www.youtube.com/watch?v=JUBoXyQ7UDQ (https://www.youtube.com/watch?v=JUBoXyQ7UDQ)
Alternatives to Motorcraft:
http://www.redlineoil.com/product.aspx?product=30704 (http://www.redlineoil.com/product.aspx?product=30704)
http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-fuel-efficient-synthetic-automatic-transmission-fluid/?code=ATLQT-EA (http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-fuel-efficient-synthetic-automatic-transmission-fluid/?code=ATLQT-EA)
http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/oe-fuel-efficient-synthetic-automatic-transmission-fluid/?code=OTLQT-EA (http://www.amsoil.com/shop/by-product/transmission-fluid/automatic/oe-fuel-efficient-synthetic-automatic-transmission-fluid/?code=OTLQT-EA)
http://www.valvoline.com/products/consumer-products/automatic-transmission-products/automatic-transmission-fluid/37 (http://www.valvoline.com/products/consumer-products/automatic-transmission-products/automatic-transmission-fluid/37)
http://www.castrol.com/en_au/australia/products/cars/automatic-transmission-fluids/transmax-dexron.html (http://www.castrol.com/en_au/australia/products/cars/automatic-transmission-fluids/transmax-dexron.html)
Need more? :D
That's impressive.. hah. Thanks for all the work that had taken. Wonder why LV looks like that so soon... :/
Yeah, hopefully the smell is not as deceptive as the sight of it!
Quote from: Larrylu on February 09, 2015, 11:00:39 AM
Very interesting and educational. I'm thinking this is playing a part in my ongoing KR spike issue. Thanks again for the tip!
Except that apparently the 3.5 EB does not follow this same method of control logic, which I'd understood as being universal.
It has been a topic here before. Instead, it appears that the EB ECU only operates in open loop, ignoring sensor feedback only in cold start operation, or perhaps in the event of failure or failsafe. Under load/acceleration, the EB continues to fuel based on sensor loopback data, or closed loop. Pretty unorthodox.
I saw you mention some KR issues in another post. KR can ghost on you quite a bit, as it can at all times register normal engine noises or rattles in the same range of frequency as real knock. Or, it could be minor detonation under light loads, as a result of a method of maximizing efficiency by advancing ignition timing to extreme levels. Either way, many engine tuners ignore it, so long as it isn't occurring at the onset or during high load situations.
Thanks that's good to know. I was assuming from my general reading/studying up, that if given enough throttle, it would revert to open loop. If that's not the case, IDK. I'm tempted to retire the KR gauge as it takes up a fair chunk of my valuable tablet screen. Trying to figure out what is going on, been driving me crazy for months. I wonder if removing the engine cover (which I did) could promote general engine noise, as it does provide a pretty thick layer of sound deadener.........
Quote from: Larrylu on February 09, 2015, 07:15:07 PM
Thanks that's good to know. I was assuming from my general reading/studying up, that if given enough throttle, it would revert to open loop. If that's not the case, IDK. I'm tempted to retire the KR gauge as it takes up a fair chunk of my valuable tablet screen. Trying to figure out what is going on, been driving me crazy for months. I wonder if removing the engine cover (which I did) could promote general engine noise, as it does provide a pretty thick layer of sound deadener.........
Yes, that is because that is literally how control logic works in every other automobile. It seems wreckless and implausible. I'd never heard of WOT closed loop control, and while I still have yet to verify this claim on my own (lazy, right), there have been several owners here who've confirmed it.
I'd still love to hear some facts on this.
Well an easy way to confirm would be to set up a "loop" gauge. Ecoboostsho mentioned there was that capability in Torque Pro. A quick WOT would confirm open or closed loop.
Is it me only but havent noticed any outside vendors as of late.
Definitely been quiet, but for the Z2S guys.
Ran the sho tonight and compared tunes ..... will be posting results later
Quote from: southtxSHO on February 12, 2015, 01:44:41 AM
Ran the sho tonight and compared tunes ..... will be posting results later
Looking forward to this
So who here can give a rough guess on how much a tune and meth will drop the 0-60 time on a 15' F150 3.5?
The 13's do it in 6.5s and the 15' does it in 5.8s. I'd like to think I could get it down to 4.8 so I could beat up on Jeep SRT's. :)
I do believe the MKS can drop a second or more with just a 93 tune. So at least a second with t+m for the f.
That would be nice to see. This latest engine version seems to be a lot more stable than the 13 we had. So once we get a few miles on it I think I'll see what kinds numbers it will make. Interested to see how the auto 4wd setting will handle a boosted launch.
Quote from: wasinger3000 on February 16, 2015, 11:11:05 AM
That would be nice to see. This latest engine version seems to be a lot more stable than the 13 we had. So once we get a few miles on it I think I'll see what kinds numbers it will make. Interested to see how the auto 4wd setting will handle a boosted launch.
From what I hear...SCT will have capabilities to tune these by end of March?
Rich
Quote from: SHOnUup on February 16, 2015, 11:15:37 AM
Quote from: wasinger3000 on February 16, 2015, 11:11:05 AM
That would be nice to see. This latest engine version seems to be a lot more stable than the 13 we had. So once we get a few miles on it I think I'll see what kinds numbers it will make. Interested to see how the auto 4wd setting will handle a boosted launch.
From what I hear...SCT will have capabilities to tune these by end of March?
Rich
A lot of places are already working on a tune for it. I'm not sure how many miles I should have on it before it gets tuned. At least 2000 or maybe the first oil change. Still under 500 miles :o Just a baby.
I'll ask torrie to look into it next time I send him a datalog.
Just saying
(http://tapatalk.imageshack.com/v2/15/02/16/6914f5e36afec88f1bec941d7f48794b.jpg)
Rich
Hey now! A lot of my fav fruits & veggies come from the sunshine state :hsugh:
Quote from: SHOdded on February 16, 2015, 05:39:46 PM
Hey now! A lot of my fav fruits & veggies come from the sunshine state :hsugh:
Only 1 day...lol
They will be stuck inside all summer hiding from hurricanes and humidity. I do believe people in warmer states live longer too...hmmm
Rich
http://www.autoblog.com/2015/02/18/14-year-old-hacker-caught-industry-by-surprise-featured/?ncid=edlinkusauto00000016
Rich
Auto industry = WAY behind the times. I see demand for pre-1980 cars exploding ;)
I had an appt at the dealer yesterday for another free oil change,but at the end my service advisor which is a buddy of mine informs me that they performed the repair/inspection of the rear door handle and all was good,the point i'm trying to make is you never know what the dealer is going to change or look at while your waiting in the shadows,so put it back to stock!!!!
Car is currently in stock mode. Going in for accident repair. Honda, Acura, Kia dealer....hmmmm what rental?
Rich
Quote from: ZSHO on February 19, 2015, 07:26:41 AM
you never know what the dealer is going to change or look at while your waiting in the shadows,so put it back to stock!!!!
Nice to have a dealer with the old-time bedside manner!
Quote from: SHOnUup on February 19, 2015, 07:41:11 AM
Car is currently in stock mode. Going in for accident repair. Honda, Acura, Kia dealer....hmmmm what rental?
Rich
The last loaner the dealer gave me was anew MKZ,which was nice but everything was push button,no shifter,the Kia OPTIMA is cool if they approve it,best of luck for a quick and quality repair buddy. http://images.autotrader.com/scaler/620/420/cms/images/auto-show/2013/new-york/2014-kia-optima/205722.jpg (http://images.autotrader.com/scaler/620/420/cms/images/auto-show/2013/new-york/2014-kia-optima/205722.jpg)
Quote from: SHOnUup on February 19, 2015, 07:41:11 AM
Car is currently in stock mode. Going in for accident repair. Honda, Acura, Kia dealer....hmmmm what rental?
Rich
Get the kia optima SX turbo. Or one of the Acura's that are more sport related. If you can..
Quote from: ZSHO on February 19, 2015, 08:25:30 AM
Quote from: SHOnUup on February 19, 2015, 07:41:11 AM
Car is currently in stock mode. Going in for accident repair. Honda, Acura, Kia dealer....hmmmm what rental?
Rich
The last loaner the dealer gave me was anew MKZ,which was nice but everything was push button,no shifter,the Kia OPTIMA is cool if they approve it,best of luck for a quick and quality repair buddy. http://images.autotrader.com/scaler/620/420/cms/images/auto-show/2013/new-york/2014-kia-optima/205722.jpg (http://images.autotrader.com/scaler/620/420/cms/images/auto-show/2013/new-york/2014-kia-optima/205722.jpg)
Thanks
Rich
Quote from: wasinger3000 on February 19, 2015, 09:48:28 AM
Quote from: SHOnUup on February 19, 2015, 07:41:11 AM
Car is currently in stock mode. Going in for accident repair. Honda, Acura, Kia dealer....hmmmm what rental?
Rich
Get the kia optima SX turbo. Or one of the Acura's that are more sport related. If you can..
Will look into these also.
Sent the wife with a list of "demands" so I could unload tools, garbage day, and pick up garage some.
She just called and said cx-7 I think...came down to just telling her AWD is a must for the weather.
Rich
CX7 AWD should be pretty nice.
Quote from: SHOnUup on February 19, 2015, 10:07:15 AM
Quote from: wasinger3000 on February 19, 2015, 09:48:28 AM
Quote from: SHOnUup on February 19, 2015, 07:41:11 AM
Car is currently in stock mode. Going in for accident repair. Honda, Acura, Kia dealer....hmmmm what rental?
Rich
Get the kia optima SX turbo. Or one of the Acura's that are more sport related. If you can..
Will look into these also.
Sent the wife with a list of "demands" so I could unload tools, garbage day, and pick up garage some.
She just called and said cx-7 I think...came down to just telling her AWD is a must for the weather.
Rich
I kinda assumed they would just give you what ever they had used laying around. That's how it always is. At least it would be cool to try out the new kia Sorento awd.
They said we could take anything we want when we where there getting it looked over last week. The $30 a day rental coverage was "good enough". Also said we could bring back rental at anytime for another.
I think mentioning we were looking at getting another SUV when the weather breaks and their prices drop may have inspired the take whatever thing.
Rich
It is impressive to see how quickly these guys can develop an intercooler. Really makes me heavily consider buying a 16' STI.
http://forums.nasioc.com/forums/showthread.php?t=2688576
I know it seems to be a very odd question but under members profile and in regards to statistics,for example time and hours spent on the forum,why is that calculated,find it kind off odd and thought there would be a little more disclosure in many aspects.
Quote from: ZSHO on March 05, 2015, 09:47:23 PM
I know it seems to be a very odd question but under members profile and in regards to statistics,for example time and hours spent on the forum,why is that calculated,find it kind off odd and thought there would be a little more disclosure in many aspects.
Its built into the forum software, like the stats on the bottom of the forum home screen.
I think it's pretty standard with forum software in general.
It is in your profile so it's not like anything is being hidden from you.
Quote from: FoMoCoSHO on March 05, 2015, 09:56:17 PM
Quote from: ZSHO on March 05, 2015, 09:47:23 PM
I know it seems to be a very odd question but under members profile and in regards to statistics,for example time and hours spent on the forum,why is that calculated,find it kind off odd and thought there would be a little more disclosure in many aspects.
Its built into the forum software, like the stats on the bottom of the forum home screen.
I think it's pretty standard with forum software in general.
It is in your profile so it's not like anything is being hidden from you.
To cut to the chase,anyone can just search and find out how many hours or total days you spent time on here is that correct.
Yup
Now what I don't know is if only members can see those stats...i will log out and check for you.
Only members can see your stats, fyi.
There is a profile mod to turn off your online status but I have no idea if that affects yours stats being able to be viewed or not.
Quote from: FoMoCoSHO on March 05, 2015, 10:07:39 PM
Yup
I really appreciate you responding to my initial question accordingly and with a YUP to go along with it,unfortunetly other forums i have been invited to seemed more private(closed doors)than this one,will give my answer on friday,thanks .Z.
Quote from: ZSHO on March 05, 2015, 10:27:49 PM
Quote from: FoMoCoSHO on March 05, 2015, 10:07:39 PM
Yup
I really appreciate you responding to my initial question accordingly and with a YUP to go along with it,unfortunetly other forums i have been invited to seemed more private(closed doors)than this one,will give my answer on friday,thanks .Z.
I have a mod account so regular accounts may not be able to see you.
Hopefuly SHOdded will chime in if he knows.
Currently, any member can view any other member's stats. I don't think a member can modify their profile to turn this on/off, would have to be done by moderator/admin, and would be systemwide.
Oh the neglect
http://truckviewtv.com/bad-brakes-really-bad-brakes/
Rich
Not good! Hope this is not going to parallel Hellcat history.
https://autos.yahoo.com/news/2015-mustang-gt-goes-flames-dealership-visit-130004488.html (https://autos.yahoo.com/news/2015-mustang-gt-goes-flames-dealership-visit-130004488.html)
(http://media.zenfs.com/en-US/cms/autos/Boldride/2015mustangfire.jpg)
Quote from: SHOdded on March 06, 2015, 06:37:14 PM
Not good! Hope this is not going to parallel Hellcat history.
https://autos.yahoo.com/news/2015-mustang-gt-goes-flames-dealership-visit-130004488.html (https://autos.yahoo.com/news/2015-mustang-gt-goes-flames-dealership-visit-130004488.html)
(http://media.zenfs.com/en-US/cms/autos/Boldride/2015mustangfire.jpg)
Oh boy, the Ford haters are gonna love this. Bet that picture is viral already.
Rich
Lol. Geeze.
It has come to my attn that unfortunetly will be leaving this great forum.honestly if it wasnt for MANU and his great suppport would of left a long time ago,thanks again for all that you all have done,lets see what happens down the road maybe i'll change my mind,thanks guys,Z.
Well, I don't know what's going on but my PM box is always open if you need to chat about anything.
I would also be happy to move it to a more personal form of communication if need be.
Good luck!
Quote from: ZSHO on March 06, 2015, 10:17:32 PM
It has come to my attn that unfortunetly will be leaving this great forum.honestly if it wasnt for MANU and his great suppport would of left a long time ago,thanks again for all that you all have done,lets see what happens down the road maybe i'll change my mind,thanks guys,Z.
Your presence will be missed buddy. I hope all is well with you and your pops. Feel free to send me a message anytime you want to chat.
Rich
Quote from: ZSHO on March 05, 2015, 10:27:49 PM
Quote from: FoMoCoSHO on March 05, 2015, 10:07:39 PM
Yup
I really appreciate you responding to my initial question accordingly and with a YUP to go along with it,unfortunetly other forums i have been invited to seemed more private(closed doors)than this one,will give my answer on friday,thanks .Z.
They may "seem" more private but that doesn't make it so.
I seriously doubt anyone here cares how much time you spend on the forum. I know the staff (all 3 of us) have better things to do than watch the movements of our members. Hell, I never paid any attention to the personal stats till you brought this up. If you consider how many hours people spent logged in afk because they forgot to log out, the data is absolutely useless.
If you think there is something nefarious going on, I wish you'd just explain what it is that's bothering you so we can get to the bottom of it. I'm an extremely private person and there is nothing going on here that concerns me in the least.
WTF......there are no women on this forum last time I checked, why the drama? LOL
Quote from: FoMoCoSHO on March 07, 2015, 04:56:34 PM
Quote from: ZSHO on March 05, 2015, 10:27:49 PM
Quote from: FoMoCoSHO on March 05, 2015, 10:07:39 PM
Yup
I really appreciate you responding to my initial question accordingly and with a YUP to go along with it,unfortunetly other forums i have been invited to seemed more private(closed doors)than this one,will give my answer on friday,thanks .Z.
They may "seem" more private but that doesn't make it so.
I seriously doubt anyone here cares how much time you spend on the forum. I know the staff (all 3 of us) have better things to do than watch the movements of our members. Hell, I never paid any attention to the personal stats till you brought this up. If you consider how many hours people spent logged in afk because they forgot to log out, the data is absolutely useless.
If you think there is something nefarious going on, I wish you'd just explain what it is that's bothering you so we can get to the bottom of it. I'm an extremely private person and there is nothing going on here that concerns me in the least.
FoMoCoSHO never knew you were so concerned,thats very kind of you,let me start by saying that my decision was based on a personal level,and clearly not on the status feature,my initial question was if the feature can be turned off and nothing more or less,personally have supported this fine forum in many aspects for quite sometime know and surely dont think any nefarious things are going on,if a little respect was shown to one another rather than comments like Drama being brought up would make things better here,thanks.Z
I've been on car forums since 2000 when I had a Isuzu VehiCROSS. I've never had issues with privacy. What issue are you having?
I guess it will benefit me more being active on the forum due to a personal issue at home,in response to p.munkee comment there is no such issues affecting me or anyone in that matter,thanks.z.
If anyone is interested in getting a new gopro hero 4 black or silver let me know I can save you around $180.
http://www.svtperformance.com/?p=13617
Rich
Quote from: SHOnUup on March 10, 2015, 05:12:04 PM
http://www.svtperformance.com/?p=13617 (http://www.svtperformance.com/?p=13617)
Rich
NO search found Rich!!
Working here, 11.77 ecoboost mustang
Sent from my iPad using Tapatalk
Quote from: ZSHO on March 06, 2015, 10:17:32 PM
It has come to my attn that unfortunetly will be leaving this great forum.honestly if it wasnt for MANU and his great suppport would of left a long time ago,thanks again for all that you all have done,lets see what happens down the road maybe i'll change my mind,thanks guys,Z.
I hope you're not leaving, I've been posting a short while but I don't want to see you go, we don't have enough people here as it is, yet knowledgeable like yourself...
Thanks FLOSHO,that was very kind and considerate of you,probably will be around because of cool people like you and many others,thank you for the warm thoughts,Z.
Yeah bud don't go....Would you stay even for me? I'll feel empty inside knowing the person I gave my first thank you to is gone
Quote from: ajpturbo on March 10, 2015, 10:23:06 PM
Yeah bud don't go....Would you stay even for me? I'll feel empty inside knowing the person I gave my first thank you to is gone
I really needed to clear up my head based on a personal family matter,so probably will be around,dont temp me i can always delete that thank you in a touch of a button,thanks for the warm thoughts.Z.
It really amazes me and find it quite upsetting based on reading up on the E.B platform having issues with coking of the intake valves which is nothing new to us,but after reading on the F150 forums and others find it amazing the amount of bashing of outside vendors due to there false products and scams especially on the oil catch can front,no wonder they simply dissapeared from this forum which is a good thing,just did not want to disclose any names or titles of the co,would be great to have a section on which vendors to avoid which i mentioned a while back,personally i think it really would benefit everyone and avoid a costly mistake,thanks,Z.
Quote from: ZSHO on March 13, 2015, 10:42:07 AM
It really amazes me and find it quite upsetting based on reading up on the E.B platform having issues with coking of the intake valves which is nothing new to us,but after reading on the F150 forums and others find it amazing the amount of bashing of outside vendors due to there false products and scams especially on the oil catch can front,no wonder they simply dissapeared from this forum which is a good thing,just did not want to disclose any names or titles of the co,would be great to have a section on which vendors to avoid which i mentioned a while back,thanks.Z.
Well, I'm not sure it's a "scam" necessarily. Under boost PCV operation reverses and all of that crap exits the clean side into the front turbo. When those gasses hit the charge cooler and everything falls out of suspension I believe it falls to the bottom of the charge cooler and if too much builds up over time it will get sucked up into the intake stream. There is a thread somewhere that shows how to check your CAC for buildup and iirc one member had pretty substantial buildup.
I have seen Ford's training vid on our PCV system and operation is exactly as vendors have described. Whether or not it falls out of suspension in the CAC is speculation but I don't think it is an unreasonable assumption.
And it will be interesting if the Z2S IC pulls even more out of suspension. Hopefully it has a drain plug on it.
Quote from: FoMoCoSHO on March 13, 2015, 10:53:04 AM
Quote from: ZSHO on March 13, 2015, 10:42:07 AM
It really amazes me and find it quite upsetting based on reading up on the E.B platform having issues with coking of the intake valves which is nothing new to us,but after reading on the F150 forums and others find it amazing the amount of bashing of outside vendors due to there false products and scams especially on the oil catch can front,no wonder they simply dissapeared from this forum which is a good thing,just did not want to disclose any names or titles of the co,would be great to have a section on which vendors to avoid which i mentioned a while back,thanks.Z.
Well, I'm not sure it's a "scam" necessarily. Under boost PCV operation reverses and all of that crap exits the clean side into the front turbo. When those gasses hit the charge cooler and everything falls out of suspension I believe it falls to the bottom of the charge cooler and if too much builds up over time it will get sucked up into the intake stream. There is a thread somewhere that shows how to check your CAC for buildup and iirc one member had pretty substantial buildup.
I have seen Ford's training vid on our PCV system and operation is exactly as vendors have described. Whether or not it falls out of suspension in the CAC is speculation but I don't think it is an unreasonable assumption.
Of course the asymmetric design will still have that stuff hitting the compression impellers of the front turbo...coking the blades up before it gets to the IC to condense... with the back spared this insult... it has to decrease turbo performance and longevity.
I think its time to put my downpipes on....
FoMoCoSHO good luck on the DP install,after having it done twice on my car found it beneficial to use some PB blaster liberally before removing those bolts,and two sets of gaskets to ensure a leak free system,hope this helps and good luck to you.Z http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat (http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat)
Quote from: ZSHO on March 17, 2015, 09:08:41 AM
FoMoCoSHO good luck on the DP install,after having it done twice on my car found it beneficial to use some PB blaster liberally before removing those bolts,and two sets of gaskets to ensure a leak free system,hope this helps and good luck to you.Z http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat (http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat)
I refuse to wrench on my cars anymore. I just want to drive it and enjoy it. Hence why God made dealership techs....
Any yeah, new gaskets all around.
Quote from: FoMoCoSHO on March 17, 2015, 02:11:56 PM
Quote from: ZSHO on March 17, 2015, 09:08:41 AM
FoMoCoSHO good luck on the DP install,after having it done twice on my car found it beneficial to use some PB blaster liberally before removing those bolts,and two sets of gaskets to ensure a leak free system,hope this helps and good luck to you.Z http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat (http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat)
I refuse to wrench on my cars anymore. I just want to drive it and enjoy it. Hence why God made dealership techs....
Spot On!!!
Got my first speeding ticket in the last 5 years. Helluva a run considering how I drive, hopefully I can go another 5! lol
Was nailed going 12 over. I had my radar detector muted and I wasn't paying attention. Took off hard at a stop light and came around a corner and there the trooper was.
Seeing if an attorney can reduce the ticket to a non moving violation. Right now it's 4 points but gets reduced to 2 points if I pay the $170 fine within 20 days.
If this is the worst thing that happens today, then I'm doing alright I suppose!
Quote from: PokerMunkee on March 18, 2015, 11:38:23 AM
Got my first speeding ticket in the last 5 years. Helluva a run considering how I drive, hopefully I can go another 5! lol
Was nailed going 12 over. I had my radar detector muted and I wasn't paying attention. Took off hard at a stop light and came around a corner and there the trooper was.
Seeing if an attorney can reduce the ticket to a non moving violation. Right now it's 4 points but gets reduced to 2 points if I pay the $170 fine within 20 days.
If this is the worst thing that happens today, then I'm doing alright I suppose!
Select the show up in court option. May be able to sweet talk the judge?
Rich
Stiff fine, PM! Hope you can get it reduced/dropped.
Quote from: FoMoCoSHO on March 17, 2015, 02:11:56 PM
Quote from: ZSHO on March 17, 2015, 09:08:41 AM
FoMoCoSHO good luck on the DP install,after having it done twice on my car found it beneficial to use some PB blaster liberally before removing those bolts,and two sets of gaskets to ensure a leak free system,hope this helps and good luck to you.Z http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat (http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat)
I refuse to wrench on my cars anymore. I just want to drive it and enjoy it. Hence why God made dealership techs....
You mean stealership techs that leave your car dirtier and smudged up? LOL sorry couldn't resist...There are good techs out there though
Quote from: ajpturbo on March 18, 2015, 12:17:38 PM
Quote from: FoMoCoSHO on March 17, 2015, 02:11:56 PM
Quote from: ZSHO on March 17, 2015, 09:08:41 AM
FoMoCoSHO good luck on the DP install,after having it done twice on my car found it beneficial to use some PB blaster liberally before removing those bolts,and two sets of gaskets to ensure a leak free system,hope this helps and good luck to you.Z http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat (http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat)
I refuse to wrench on my cars anymore. I just want to drive it and enjoy it. Hence why God made dealership techs....
You mean stealership techs that leave your car dirtier and smudged up? LOL sorry couldn't resist...There are good techs out there though
So far my dealership has done well by me... BUT even if they smudge it up I have standing instructions... no courtesy wash and no wiping on the finish. My service advisor always writes it in red on the work order and on the car work ID tag. It's why I put Quart Finest on the car...
I'll admit it's ME that is the problem as I expect people to take care of the car as if it was their own but that's just unreasonable on my part...I'm anal and I'm ok with admitting that...And most people love the courtesy wash but like you I'll wash it myself by hand.
Quote from: ajpturbo on March 18, 2015, 12:27:31 PM
I'll admit it's ME that is the problem as I expect people to take care of the car as if it was their own but that's just unreasonable on my part...I'm anal and I'm ok with admitting that...And most people love the courtesy wash but like you I'll wash it myself by hand.
I'm OC about it too... to the point where I no longer touch the car when I wash and dry it... As soon as my spot free rinse water deionizer arrives I'll REALLY be the neighborhood attraction when i was it, LOL
Quote from: SHOnUup on March 18, 2015, 11:41:23 AM
Quote from: PokerMunkee on March 18, 2015, 11:38:23 AM
Got my first speeding ticket in the last 5 years. Helluva a run considering how I drive, hopefully I can go another 5! lol
Was nailed going 12 over. I had my radar detector muted and I wasn't paying attention. Took off hard at a stop light and came around a corner and there the trooper was.
Seeing if an attorney can reduce the ticket to a non moving violation. Right now it's 4 points but gets reduced to 2 points if I pay the $170 fine within 20 days.
If this is the worst thing that happens today, then I'm doing alright I suppose!
Select the show up in court option. May be able to sweet talk the judge?
Rich
A lot of the times if you go to court the officer that issued the fine will not be there so if you contest the charge the judge will dismiss the charge because the officer is not there.
Or they will move it to another day when he is there lol. I got out of one this way.
Quote from: PokerMunkee on March 18, 2015, 11:38:23 AM
Got my first speeding ticket in the last 5 years. Helluva a run considering how I drive, hopefully I can go another 5! lol
Was nailed going 12 over. I had my radar detector muted and I wasn't paying attention. Took off hard at a stop light and came around a corner and there the trooper was.
Seeing if an attorney can reduce the ticket to a non moving violation. Right now it's 4 points but gets reduced to 2 points if I pay the $170 fine within 20 days.
If this is the worst thing that happens today, then I'm doing alright I suppose!
Quote from: BiGMaC on March 18, 2015, 12:31:03 PM
Quote from: ajpturbo on March 18, 2015, 12:27:31 PM
I'll admit it's ME that is the problem as I expect people to take care of the car as if it was their own but that's just unreasonable on my part...I'm anal and I'm ok with admitting that...And most people love the courtesy wash but like you I'll wash it myself by hand.
I'm OC about it too... to the point where I no longer touch the car when I wash and dry it... As soon as my spot free rinse water deionizer arrives I'll REALLY be the neighborhood attraction when i was it, LOL
Tom love the video you posted a while back on how to properly use the cleaning product starring the super,sensual.sexy lady.LOL
Quote from: ajpturbo on March 18, 2015, 12:17:38 PM
Quote from: FoMoCoSHO on March 17, 2015, 02:11:56 PM
Quote from: ZSHO on March 17, 2015, 09:08:41 AM
FoMoCoSHO good luck on the DP install,after having it done twice on my car found it beneficial to use some PB blaster liberally before removing those bolts,and two sets of gaskets to ensure a leak free system,hope this helps and good luck to you.Z http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat (http://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/exhaust-system-cat/exhaust-components-scat)
I refuse to wrench on my cars anymore. I just want to drive it and enjoy it. Hence why God made dealership techs....
You mean stealership techs that leave your car dirtier and smudged up? LOL sorry couldn't resist...There are good techs out there though
My situation is "unique".
High Command sees to it that my car is treated properly.
Only certain techs are given access to my car.
(http://tapatalk.imageshack.com/v2/15/03/18/2e2c2c9805164474172a1fb3d3c802f2.jpg)
Congrats to Torrie...looks to be one of the first to crack the code.
Rich
Jeez almost as much to the wheels as stock crank! Looks like the HCs have good tuning potential. Just don't want to see them decimated so early in life.
Quote from: SHOdded on March 18, 2015, 03:25:10 PM
Jeez almost as much to the wheels as stock crank! Looks like the HCs have good tuning potential. Just don't want to see them decimated so early in life.
I can't wait to see where people take these things. We'll see where the weak links are soon.
Rich
Quote from: SHOnUup on March 18, 2015, 03:28:00 PM
Quote from: SHOdded on March 18, 2015, 03:25:10 PM
Jeez almost as much to the wheels as stock crank! Looks like the HCs have good tuning potential. Just don't want to see them decimated so early in life.
I can't wait to see where people take these things. We'll see where the weak links are soon.
Rich
I wouldn't want to be the guy to find all those weak links. Hah. Drive shaft breaking at 190 is a no fun zone.
Quote from: wasinger3000 on March 18, 2015, 05:30:42 PM
Quote from: SHOnUup on March 18, 2015, 03:28:00 PM
Quote from: SHOdded on March 18, 2015, 03:25:10 PM
Jeez almost as much to the wheels as stock crank! Looks like the HCs have good tuning potential. Just don't want to see them decimated so early in life.
I can't wait to see where people take these things. We'll see where the weak links are soon.
Rich
I wouldn't want to be the guy to find all those weak links. Hah. Drive shaft breaking at 190 is a no fun zone.
For sure. Seeing a couple rip the drive shaft out already, makes you wonder. Just read another post from Torrie that they really need a pulley. Right now it's maxing out at 10 psi.
Rich
Quote from: SHOnUup on March 18, 2015, 05:35:59 PM
Quote from: wasinger3000 on March 18, 2015, 05:30:42 PM
Quote from: SHOnUup on March 18, 2015, 03:28:00 PM
Quote from: SHOdded on March 18, 2015, 03:25:10 PM
Jeez almost as much to the wheels as stock crank! Looks like the HCs have good tuning potential. Just don't want to see them decimated so early in life.
I can't wait to see where people take these things. We'll see where the weak links are soon.
Rich
I wouldn't want to be the guy to find all those weak links. Hah. Drive shaft breaking at 190 is a no fun zone.
For sure. Seeing a couple rip the drive shaft out already, makes you wonder. Just read another post from Torrie that they really need a pulley. Right now it's maxing out at 10 psi.
Rich
That's pretty low. I wonder how the internals will hold up with more boost.
So....White Platinum Metallic Tri Coat.
Everything I have now plus Performance Package, Multi Contour seats, and 7/100 Premium care which I was getting ready to stroke a check for on the current one.
Cheaper payment.
I was planning on keeping the current one, but High Command heard about the extra incentives and knows how I crave an Alcantara steering wheel and multi contour seats. She has also heard my grumbling about the extra HD parts PP offers. Seeing as I don't like to make her unhappy.....
I really didn't think I could get a better deal than my current one, but a fat rebate, D-plan, and 2 extra incentives stacked on a very low money factor lease exceeded my expectations.
If i pull the trigger, car will be delivered to me, then driven directly to Concours John for a Cquartz finest treatment.
Sure sounds difficult to say no to that proposition, although ... Switching from Darkside to BrightLight?
Quote from: SHOdded on March 23, 2015, 12:00:51 AM
Sure sounds difficult to say no to that proposition, although ... Switching from Darkside to BrightLight?
Deep Impact Blue was my first choice, but there are none available with PP.
Tri White was my second choice, and I've always been a fan of white.
Sometimes you can't afford not to buy a new car!
And the dealership model fails the Ford customer again....
It seems the other dealership will not play ball with my dealership because they have 2 or 3 "interested" customers.
Well if they're so "interested", why is the damn car still sitting on their lot?
If they're so interested, maybe they should get out their g-damn checkbooks!
Money talks!
So.....Bronze Fire?
Anyone know the difference between the cars that have "California emissions" on the window sticker vs the ones that don't?
When I think about "California emissions" I tend to think less power or potential for power...
IOW, buzzkill....
Sucks about the pushback. CA Emissions - Higher capacity cats, maybe? According to this blurb, no real difference after 2001:
http://www.discountconverter.com/tech-tips/news_page.cfm?Key=catalytic_converter-&News=251 (http://www.discountconverter.com/tech-tips/news_page.cfm?Key=catalytic_converter-&News=251)
I was comparing the height on our SHO,think the coilovers are called for compared to my BIIIMER,which has Eibach springs and Bilstein shocks,guess have to wait until they hopefully come out soon.Z.
Quote from: ZSHO on March 24, 2015, 12:29:39 PM
I was comparing the height on our SHO,think the coilovers are called for compared to my BIIIMER,which has Eibach springs and Bilstein shocks,guess have to wait until they hopefully come out soon.Z.
Does anyone know if pp springs are shorter? Yours looks lower than mine did stock....
Quote from: FoMoCoSHO on March 24, 2015, 01:40:31 PM
Quote from: ZSHO on March 24, 2015, 12:29:39 PM
I was comparing the height on our SHO,think the coilovers are called for compared to my BIIIMER,which has Eibach springs and Bilstein shocks,guess have to wait until they hopefully come out soon.Z.
Does anyone know if pp springs are shorter? Yours looks lower than mine did stock....
Not 100% but I think the springs on my PP are longer than non PP based on ride height comparison.
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
Love that color, new for the SHO line, isn't it?
Yup...$595.00 "option"
NIIIIICE! Congrats!
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
Congrats on the new purchase! Bronze fire...sounds nice. Going to have to Google that.
Rich
Quote from: FoMoCoSHO on March 24, 2015, 03:56:55 PM
Yup...$595.00 "option"
Could be the equivalent of the Kona Blue in its' relative rarity :)
Quote from: SHOdded on March 24, 2015, 04:15:11 PM
Quote from: FoMoCoSHO on March 24, 2015, 03:56:55 PM
Yup...$595.00 "option"
Could be the equivalent of the Kona Blue in its' relative rarity :)
Beautiful choice!
My dealer did the work on this rear door handles based on a TSB... the issue is now an NHTSA recall, # 15V-040. Ford uses a different reference number in the letter stating you should ask your dealer for a service date for Recall # 15S02 and to give the dealer your VIN.
I just got the letter today. It says they will inspect them and if they pass they will install "reinforcements to prevent future concerns" and if they fail a revised interior door handle assembly will be installed. Of course, because it's a safety recall, no charges for parts or labor will be made regardless of age or mileage on your SHO. They say less than 1/2 day... My dealer did that, the license plate light fixture, replaced the LP fuel pump, replaced the fuel control module, and test drove mine twice between 7am and noon on my last trip to the shop... so it should be quick if they get the parts.
They also list an address to get a refund if you've paid for this service or authorize the dealer to refund the money on presentation of a paid receipt.
notice sent to dealers
Ha, I blamed my 4 year old son for breaking my rear inside door handle. I think he did yank on it. Was fixed under warranty. Will have them check it out on next visit.
I guess its a safety recall,like BiGMaC stated,recall#15S02 had mine performed a couple of weeks ago and they also had to order the part for the rear passenger door handle,and installed reinforcement clips on three doors based on the work order,cause the passenger rear door failed inspection,have an appt friday for a few issues hopefully can get resolved.Z.
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
So how long before this girl becomes an alcoholic?
Quote from: BiGMaC on March 24, 2015, 09:04:02 PM
My dealer did the work on this rear door handles based on a TSB... the issue is now an NHTSA recall, # 15V-040. Ford uses a different reference number in the letter stating you should ask your dealer for a service date for Recall # 15S02 and to give the dealer your VIN.
I just got the letter today. It says they will inspect them and if they pass they will install "reinforcements to prevent future concerns" and if they fail a revised interior door handle assembly will be installed. Of course, because it's a safety recall, no charges for parts or labor will be made regardless of age or mileage on your SHO. They say less than 1/2 day... My dealer did that, the license plate light fixture, replaced the LP fuel pump, replaced the fuel control module, and test drove mine twice between 7am and noon on my last trip to the shop... so it should be quick if they get the parts.
They also list an address to get a refund if you've paid for this service or authorize the dealer to refund the money on presentation of a paid receipt.
It took some time for this to roll out, as expected. I couldn't deal with mine just flopping around so I fixed it myself.
Not to certain what they mean by "reinforcments"...
Quote from: wasinger3000 on March 25, 2015, 10:41:03 AM
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
So how long before this girl becomes an alcoholic?
For once I'm hoping the dealer leaves no gas in it.
I want to experiment....Shell v-power, maybe a gallon of corn and a couple bottles of HEET.
The goal is highest effective octane with least amount of corn for fuel volume
The guys over at the Mazdaspeed forums have had success with small amount of directly injected meth....
http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/ (http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/)
FoMoCoSHO best of luck with the new girl coming soon,have them change that oil on the spot.Z.
Quote from: ZSHO on March 25, 2015, 01:24:27 PM
FoMoCoSHO best of luck with the new girl coming soon,have them change that oil on the spot.Z.
She goes in next week for Amsoil in the crankcase and tranny plus some downpipes.
Oh damn, need plugs re-gapped and a t-stat too.
Anybody handy with Adobe Illustrator or similar products? A member on SHOforum is looking for assistance in interlacing vector graphics for a Gen III SHO part. TIA!
http://www.shoforum.com/index.php?threads/adobe-illustrator.129768/#post-1426690 (http://www.shoforum.com/index.php?threads/adobe-illustrator.129768/#post-1426690)
I just came back from a new Target store,and earlier found parking right in the front and after coming out of the store the alarm was honking and the lights were flashing,left the shopping cart and ran to the car and found a small amount of damage to the drivers door cylinder,guess the idiot was trying to open the door with a screwdriver and the alarm sounded,guess the alarm did its job pretty good,a buddy of mine has a bodyshop and can probably buff it out i hope.Z
Quote from: ZSHO on April 01, 2015, 10:42:14 AM
I just came back from a new Target store,and earlier found parking right in the front and after coming out of the store the alarm was honking and the lights were flashing,left the shopping cart and ran to the car and found a small amount of damage to the drivers door cylinder,guess the idiot was trying to open the door with a screwdriver and the alarm sounded,guess the alarm did its job pretty good,a buddy of mine has a bodyshop and can probably buff it out i hope.Z
That's Flippin horrible Z....right up front too. You think of asking for video surveillance to at least try and get a visual ID?
Rich
Quote from: SHOnUup on April 01, 2015, 11:13:53 AM
Quote from: ZSHO on April 01, 2015, 10:42:14 AM
I just came back from a new Target store,and earlier found parking right in the front and after coming out of the store the alarm was honking and the lights were flashing,left the shopping cart and ran to the car and found a small amount of damage to the drivers door cylinder,guess the idiot was trying to open the door with a screwdriver and the alarm sounded,guess the alarm did its job pretty good,a buddy of mine has a bodyshop and can probably buff it out i hope.Z
That's Flippin horrible Z....right up front too. You think of asking for video surveillance to at least try and get a visual ID?
x2! Get that SOB and make him pay!!!
Quote from: FoMoCoSHO on March 25, 2015, 11:54:01 AM
Quote from: wasinger3000 on March 25, 2015, 10:41:03 AM
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
So how long before this girl becomes an alcoholic?
For once I'm hoping the dealer leaves no gas in it.
I want to experiment....Shell v-power, maybe a gallon of corn and a couple bottles of HEET.
The goal is highest effective octane with least amount of corn for fuel volume
The guys over at the Mazdaspeed forums have had success with small amount of directly injected meth....
http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/ (http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/)
I hadn't ever seen that thread. I use to spend alot of time at that forum. If you wade through the mountains a horse crap, there's invaluable information, which can transcend platforms. Member Phate is also quite a contributor of all things Mazdaspeed, most recently suspension dynamics.
Pretty interesting study. If we could learn the sealing materials used in our fueling system, we could learn limitations without running to failure.
I think most commonly found materials in auto systems are fluorocarbon elastomers. Viton.
Also perhaps Buna Nitrile, Chemraz and Kalrez. All alcohol safe, but I suppose swell differently.
Quote from: IHeartGroceries on April 01, 2015, 02:59:44 PM
Quote from: FoMoCoSHO on March 25, 2015, 11:54:01 AM
Quote from: wasinger3000 on March 25, 2015, 10:41:03 AM
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
So how long before this girl becomes an alcoholic?
For once I'm hoping the dealer leaves no gas in it.
I want to experiment....Shell v-power, maybe a gallon of corn and a couple bottles of HEET.
The goal is highest effective octane with least amount of corn for fuel volume
The guys over at the Mazdaspeed forums have had success with small amount of directly injected meth....
http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/ (http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/)
I hadn't ever seen that thread. I use to spend alot of time at that forum. If you wade through the mountains a horse crap, there's invaluable information, which can transcend platforms. Member Phate is also quite a contributor of all things Mazdaspeed, most recently suspension dynamics.
Pretty interesting study. If we could learn the sealing materials used in our fueling system, we could learn limitations without running to failure.
I think most commonly found materials in auto systems are fluorocarbon elastomers. Viton.
Also perhaps Buna Nitrile, Chemraz and Kalrez. All alcohol safe, but I suppose swell differently.
http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html)
Quote from: FoMoCoSHO on April 01, 2015, 03:20:21 PM
Quote from: IHeartGroceries on April 01, 2015, 02:59:44 PM
Quote from: FoMoCoSHO on March 25, 2015, 11:54:01 AM
Quote from: wasinger3000 on March 25, 2015, 10:41:03 AM
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
So how long before this girl becomes an alcoholic?
For once I'm hoping the dealer leaves no gas in it.
I want to experiment....Shell v-power, maybe a gallon of corn and a couple bottles of HEET.
The goal is highest effective octane with least amount of corn for fuel volume
The guys over at the Mazdaspeed forums have had success with small amount of directly injected meth....
http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/ (http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/)
I hadn't ever seen that thread. I use to spend alot of time at that forum. If you wade through the mountains a horse crap, there's invaluable information, which can transcend platforms. Member Phate is also quite a contributor of all things Mazdaspeed, most recently suspension dynamics.
Pretty interesting study. If we could learn the sealing materials used in our fueling system, we could learn limitations without running to failure.
I think most commonly found materials in auto systems are fluorocarbon elastomers. Viton.
Also perhaps Buna Nitrile, Chemraz and Kalrez. All alcohol safe, but I suppose swell differently.
http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html)
Missed that thread somehow, I guess. Hmmm...
Any gardeners here?
All of my perennials are coming back. Redbud and almond look incredible. Dropping some annuals around, here and there. Spring is just the best.
Too bad...I've yet to treat the rose bush for blight. Fully expect it'll be back this spring.
Quote from: IHeartGroceries on April 01, 2015, 07:47:46 PM
Quote from: FoMoCoSHO on April 01, 2015, 03:20:21 PM
Quote from: IHeartGroceries on April 01, 2015, 02:59:44 PM
Quote from: FoMoCoSHO on March 25, 2015, 11:54:01 AM
Quote from: wasinger3000 on March 25, 2015, 10:41:03 AM
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
So how long before this girl becomes an alcoholic?
For once I'm hoping the dealer leaves no gas in it.
I want to experiment....Shell v-power, maybe a gallon of corn and a couple bottles of HEET.
The goal is highest effective octane with least amount of corn for fuel volume
The guys over at the Mazdaspeed forums have had success with small amount of directly injected meth....
http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/ (http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/)
I hadn't ever seen that thread. I use to spend alot of time at that forum. If you wade through the mountains a horse crap, there's invaluable information, which can transcend platforms. Member Phate is also quite a contributor of all things Mazdaspeed, most recently suspension dynamics.
Pretty interesting study. If we could learn the sealing materials used in our fueling system, we could learn limitations without running to failure.
I think most commonly found materials in auto systems are fluorocarbon elastomers. Viton.
Also perhaps Buna Nitrile, Chemraz and Kalrez. All alcohol safe, but I suppose swell differently.
http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html)
Missed that thread somehow, I guess. Hmmm...
Any gardeners here?
All of my perennials are coming back. Redbud and almond look incredible. Dropping some annuals around, here and there. Spring is just the best.
Too bad...I've yet to treat the rose bush for blight. Fully expect it'll be back this spring.
The wife always throws out some flowers in the spring. We do have some cool stuff that comes up every year though.
We have a trumpeter vine that brings in hummingbirds, under that some massive lily's in a bed, these huge peony bushes(huge pink flowers that ants open up), and a bunch of daffodils around the pool area. And 2 of these 10' tall trees that bloom purple flowers.
Spring gets pretty colorful around here too.
We're going to do a small garden this year...per the wife's request (demand...lol)
Rich
Quote from: IHeartGroceries on April 01, 2015, 07:47:46 PM
Quote from: FoMoCoSHO on April 01, 2015, 03:20:21 PM
Quote from: IHeartGroceries on April 01, 2015, 02:59:44 PM
Quote from: FoMoCoSHO on March 25, 2015, 11:54:01 AM
Quote from: wasinger3000 on March 25, 2015, 10:41:03 AM
Quote from: FoMoCoSHO on March 24, 2015, 03:48:15 PM
It looks like my new big girl will be here in a day or two....
Bronze Fire is the color I ended up with.
So how long before this girl becomes an alcoholic?
For once I'm hoping the dealer leaves no gas in it.
I want to experiment....Shell v-power, maybe a gallon of corn and a couple bottles of HEET.
The goal is highest effective octane with least amount of corn for fuel volume
The guys over at the Mazdaspeed forums have had success with small amount of directly injected meth....
http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/ (http://www.mazdaspeedforums.org/forum/f303/methanol-direct-injection-114220/)
I hadn't ever seen that thread. I use to spend alot of time at that forum. If you wade through the mountains a horse crap, there's invaluable information, which can transcend platforms. Member Phate is also quite a contributor of all things Mazdaspeed, most recently suspension dynamics.
Pretty interesting study. If we could learn the sealing materials used in our fueling system, we could learn limitations without running to failure.
I think most commonly found materials in auto systems are fluorocarbon elastomers. Viton.
Also perhaps Buna Nitrile, Chemraz and Kalrez. All alcohol safe, but I suppose swell differently.
http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,4595.0.html)
Missed that thread somehow, I guess. Hmmm...
Any gardeners here?
All of my perennials are coming back. Redbud and almond look incredible. Dropping some annuals around, here and there. Spring is just the best.
Too bad...I've yet to treat the rose bush for blight. Fully expect it'll be back this spring.
My perennials are showing life but I'm seeing nothing on the trees...
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
The tank the car came with was horrible.
I would see +3 KR cruising at 42mph on a flat road during calm conditions with the stock tune...
There is a steep hill that leads to my house...
Tuned with E-85 I could slow to 20 and drive up in third seeing plus 5 the entire way on the happy side.
87 on the stock tune showed +6 on the naughty side the entire way up.
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
Hell I figured you would've had a retune for that by now, lol...
Quote from: FoMoCoSHO on April 02, 2015, 01:10:48 AM
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
The tank the car came with was horrible.
I would see +3 KR cruising at 42mph on a flat road during calm conditions with the stock tune...
There is a steep hill that leads to my house...
Tuned with E-85 I could slow to 20 and drive up in third seeing plus 5 the entire way on the happy side.
87 on the stock tune showed +6 on the naughty side the entire way up.
Makes me wonder how the trucks do running 87 while towing... can't be healthy. Guess it will just cut power till its happy.
I was at 1 psi boost while at 70 mph with the cruise set. It was a pretty steep load to be under boost like that.
Quote from: FoMoCoSHO on April 02, 2015, 01:16:05 AM
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
Hell I figured you would've had a retune for that by now, lol...
Haha. Tune revision #4,604. Help me Torrie!!!!
Quote from: wasinger3000 on April 02, 2015, 01:16:59 AM
Quote from: FoMoCoSHO on April 02, 2015, 01:16:05 AM
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
Hell I figured you would've had a retune for that by now, lol...
Haha. Tune revision #4,604. Help me Torrie!!!!
I was on revision 11 when I detuned the black car.
Driving it stock was quite shocking to say the least....
Last tune showed negative knock the entire run and that was at 20%....was getting ready to start cranking up the timing and moving the blend down to 15%
Quote from: FoMoCoSHO on April 02, 2015, 01:24:38 AM
Quote from: wasinger3000 on April 02, 2015, 01:16:59 AM
Quote from: FoMoCoSHO on April 02, 2015, 01:16:05 AM
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
Hell I figured you would've had a retune for that by now, lol...
Haha. Tune revision #4,604. Help me Torrie!!!!
I was on revision 11 when I detuned the black car.
Driving it stock was quite shocking to say the least....
Last tune showed negative knock the entire run and that was at 20%....was getting ready to start cranking up the timing and moving the blend down to 15%
How long before you start to push it on the new girl? Ever going to put WM on it?
I have quite a few revisions on my WM tune. Car keeps taking the small steps up so the wall has to be coming up here soon.
Quote from: wasinger3000 on April 02, 2015, 01:35:10 AM
Quote from: FoMoCoSHO on April 02, 2015, 01:24:38 AM
Quote from: wasinger3000 on April 02, 2015, 01:16:59 AM
Quote from: FoMoCoSHO on April 02, 2015, 01:16:05 AM
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
Hell I figured you would've had a retune for that by now, lol...
Haha. Tune revision #4,604. Help me Torrie!!!!
I was on revision 11 when I detuned the black car.
Driving it stock was quite shocking to say the least....
Last tune showed negative knock the entire run and that was at 20%....was getting ready to start cranking up the timing and moving the blend down to 15%
How long before you start to push it on the new girl? Ever going to put WM on it?
I have quite a few revisions on my WM tune. Car keeps taking the small steps up so the wall has to be coming up here soon.
Probably 1st oil change at 4k.
IDK about WMI, too early in the game.
Are you ever going to get that thing on a track?
Quote from: FoMoCoSHO on April 02, 2015, 01:47:37 AM
Quote from: wasinger3000 on April 02, 2015, 01:35:10 AM
Quote from: FoMoCoSHO on April 02, 2015, 01:24:38 AM
Quote from: wasinger3000 on April 02, 2015, 01:16:59 AM
Quote from: FoMoCoSHO on April 02, 2015, 01:16:05 AM
Quote from: wasinger3000 on April 02, 2015, 12:50:23 AM
Wish I had better fuel around here. I'm seeing 1-2° of knock with a 40mph head wind in 6th at 70 mph gear. The car figures it out but still don't like it.
Might have to just add meth to the gas.
Hell I figured you would've had a retune for that by now, lol...
Haha. Tune revision #4,604. Help me Torrie!!!!
I was on revision 11 when I detuned the black car.
Driving it stock was quite shocking to say the least....
Last tune showed negative knock the entire run and that was at 20%....was getting ready to start cranking up the timing and moving the blend down to 15%
How long before you start to push it on the new girl? Ever going to put WM on it?
I have quite a few revisions on my WM tune. Car keeps taking the small steps up so the wall has to be coming up here soon.
Probably 1st oil change at 4k.
IDK about WMI, too early in the game.
Are you ever going to get that thing on a track?
You should get WM so you can do some corn injection experiments. Hah.
As for my car... idk. As long as he keeps sending tunes I'll keep sending logs. I know he was working on the boost curve, not sure what else he's working on. It gives me a reason to go play. At this point I think I'd become a tad depressed if I don't see any more emails from Torrie.. haha
Hopefully the summer blend gas will help or cure some of the issues,think the changeover is around May 1st i believe.Z
Quote from: ZSHO on April 02, 2015, 09:09:49 AM
Hopefully the summer blend gas will help or cure some of the issues,think the changeover is around May 1st i believe.Z
Yes, I think the refineries switch over May 1st, expect a 2-4 week delay before it gets to the pumps. Makes it only 5 months of the year for the good stuff...:(
Rich
Need to win the lotto so I can have a tank of 116 under my garage.
Quote from: SHOnUup on April 02, 2015, 09:18:04 AM
Quote from: ZSHO on April 02, 2015, 09:09:49 AM
Hopefully the summer blend gas will help or cure some of the issues,think the changeover is around May 1st i believe.Z
Yes, I think the refineries switch over May 1st, expect a 2-4 week delay before it gets to the pumps. Makes it only 5 months of the year for the good stuff...:(
Rich
Here's the details on that...
The refineries begin switching over well before May 1st. And bulk shipment via pipeline of reduced RVP product begins as early as mid to late March. By federal law, the bulk storage at the fuel depots/distribution terminals must be fully turned by May 1st. The requirenent varies by region, according to state and even municipal mandate. Federal reg requires 9 pound at the retail level by June 1. This means retail conversion deadline is June 1. By state or local mandate, and typically in urban areas, the requirement by June 1 may be 7.8 pound, 7.0 pound, or other.
I'm in the process of turning tanks now. It's rather annoying and heavily scrutinized by HQ. It actually takes careful planning, where to put product, how much and when. Getting marketing to play with prices to get the stuff out of here. Low throughput plays hell. It can be tricky sometimes. The design of the tank weighs in, floating suction and such. The size of the tank. Tanks which aren't converted by May 1 face seasonal lockout, which is of course a very costly occurrence. But it's seldom an issue in the end.
But, what this all means for you is that you're almost certainly filling with "summer" gas already. Or, at least a nice blend of it. By early May or even late April, you'll be filling with pure summer gas. 7 to 9 pounder.
Quote from: wasinger3000 on April 02, 2015, 11:06:42 AM
Need to win the lotto so I can have a tank of 116 under my garage.
Still wont give You the effective octane as direct injected corn/wood.
I'd have a custom pump/cam made and tank of corn installed on my compound with the 1/4 mile and small road course. Everyone would be invited.
Of course we're taking Powerball.....lol
Quote from: FoMoCoSHO on April 02, 2015, 12:54:19 PM
Quote from: wasinger3000 on April 02, 2015, 11:06:42 AM
Need to win the lotto so I can have a tank of 116 under my garage.
Still wont give You the effective octane as direct injected corn/wood.
I'd have a custom pump/cam made and tank of corn installed on my compound with the 1/4 mile and small road course. Everyone would be invited.
Of course we're taking Powerball.....lol
Hah. I want something to fill the gap between when meth isn't being sprayed. I suppose I could just mix meth with my fuel at each fill.
I'm on a anti-knock campaign.
I guess with all the topics about changing trans,ptu,fluids makes you a little bit more skeptical where to have this performed. https://www.youtube.com/watch?v=-avpx8UTakI (https://www.youtube.com/watch?v=-avpx8UTakI)
Interesting! Saw a Gen 4.1 Taurus in there BTW :)
Quote from: IHeartGroceries on April 02, 2015, 12:18:01 PM
Quote from: SHOnUup on April 02, 2015, 09:18:04 AM
Quote from: ZSHO on April 02, 2015, 09:09:49 AM
Hopefully the summer blend gas will help or cure some of the issues,think the changeover is around May 1st i believe.Z
Yes, I think the refineries switch over May 1st, expect a 2-4 week delay before it gets to the pumps. Makes it only 5 months of the year for the good stuff...:(
Rich
Here's the details on that...
The refineries begin switching over well before May 1st. And bulk shipment via pipeline of reduced RVP product begins as early as mid to late March. By federal law, the bulk storage at the fuel depots/distribution terminals must be fully turned by May 1st. The requirenent varies by region, according to state and even municipal mandate. Federal reg requires 9 pound at the retail level by June 1. This means retail conversion deadline is June 1. By state or local mandate, and typically in urban areas, the requirement by June 1 may be 7.8 pound, 7.0 pound, or other.
I'm in the process of turning tanks now. It's rather annoying and heavily scrutinized by HQ. It actually takes careful planning, where to put product, how much and when. Getting marketing to play with prices to get the stuff out of here. Low throughput plays hell. It can be tricky sometimes. The design of the tank weighs in, floating suction and such. The size of the tank. Tanks which aren't converted by May 1 face seasonal lockout, which is of course a very costly occurrence. But it's seldom an issue in the end.
But, what this all means for you is that you're almost certainly filling with "summer" gas already. Or, at least a nice blend of it. By early May or even late April, you'll be filling with pure summer gas. 7 to 9 pounder.
Appreciate the info my guru of gasoline ;)
I just read an article stating this exact stuff. It also mentioned California getting it earlier and for a longer stay, with no dates given though.
Rich
Yeah, I believe California is quite a bit more stringent, surprise surprise. Glad I'm not an operator in California. Heh heh.
I have found the marketing and environmental side of this business to most interesting. I'm still learning all of the time. But I have a rather indirect role in both, so I'm forced to learn...indirectly. :)
The indirect learning and ever changing language used leads me to believe it may be strategy...you know, that political jargon. Makes me slightly sick think about
Rich
Happy Easter!
_ _
/` /`/
/ V //
/6 6
(= Y =)
/`" ^"`
/ /
(_/ .' ' .\_)
/ ; ; o
___ '-. -' /___
(((____/ ^ \____)))
Here's to bunnies, chocolate, and EASTER!!! :D
So I noticed the valve covers on my 15 are composite...
Quote from: FoMoCoSHO on April 05, 2015, 09:36:28 PM
So I noticed the valve covers on my 15 are composite...
Weight-saving or new design, do you think?
Quote from: SHOdded on April 05, 2015, 09:43:33 PM
Quote from: FoMoCoSHO on April 05, 2015, 09:36:28 PM
So I noticed the valve covers on my 15 are composite...
Weight-saving or new design, do you think?
I assume both....
FoMoCoSHO do these look familiar to you?
Hmm. I want those!
Taking off winter wheels tomorrow, can't wait to be back on a real tire and wheel again.
Quote from: FoMoCoSHO on April 05, 2015, 09:46:17 PM
Quote from: SHOdded on April 05, 2015, 09:43:33 PM
Quote from: FoMoCoSHO on April 05, 2015, 09:36:28 PM
So I noticed the valve covers on my 15 are composite...
Weight-saving or new design, do you think?
I assume both....
they are the updated version which look really cool,but unfortunetly they are heavier than the aluminuim valve covers.Z
So what is the point then?
https://youtu.be/VBs5-44dTx8
Wonder if something like this would look good on the sho .
Quote from: FoMoCoSHO on April 05, 2015, 11:01:35 PM
So what is the point then?
My intent was only to show the weight factor,appologize for intefering,chiming in.
Quote from: ZSHO on April 06, 2015, 07:32:17 AM
Quote from: FoMoCoSHO on April 05, 2015, 11:01:35 PM
So what is the point then?
My intent was only to show the weight factor,appologize for intefering,chiming in.
I think he meant what was the point of the composite covers? Why couldn't they have stuck with aluminum? Maybe it was cheaper to get these mfr'd for the TSB's, then propagate to production.
Quote from: SHOdded on April 06, 2015, 07:50:57 AM
Quote from: ZSHO on April 06, 2015, 07:32:17 AM
Quote from: FoMoCoSHO on April 05, 2015, 11:01:35 PM
So what is the point then?
My intent was only to show the weight factor,appologize for intefering,chiming in.
I think he meant what was the point of the composite covers? Why couldn't they have stuck with aluminum? Maybe it was cheaper to get these mfr'd for the TSB's, then propagate to production.
Correct, just trying to figure out the reasoning behind the change....
This (context)gets to be confusing to me sometimes,based from my experience last fall with a rear leaking valve cover,that updated valve cover in the pic was ordered for me from the dealer and did not install cause had to purchase the matching front valve cover out of pocket,but as stated from the service advisor the new updated ones are heavier but really look nice though,but as mentioned cost production,ITS ALL GOOD.Z
:) :thumb: would be nice to compare old and new side by side. Z, does your SA have both available by any chance?
Quote from: SHOdded on April 06, 2015, 08:24:12 AM
:) :thumb: would be nice to compare old and new side by side. Z, does your SA have both available by any chance?
I can definitely try to obtain a pic for you SHOdded,just give me a little time.Z
Put on my summer tires and noticed driver rear shock had a brown oil substance lightly coating the middle area. Didn't notice any of the others with this issue. I cleaned it up and will check back in a few days.
Think shock is a gonner? Anyone else dealt with this?
A quick search shows many others have same issue. Great. Don't have time to take it to dealer, traveling for 8 days next week. Will be at least 2 weeks until I can get it.
My tune and Corsa will wait some more. I'll put in new plugs and t-stat but don't want to tune it until I get the shock, hopefully both, replaced.
There sill no aftermarket shocks?
I'd like an after mart shock as well as mine is leaking too. I'll look into it.
Quote from: PokerMunkee on April 06, 2015, 12:09:42 PM
Put on my summer tires and noticed driver rear shock had a brown oil substance lightly coating the middle area. Didn't notice any of the others with this issue. I cleaned it up and will check back in a few days.
Think shock is a gonner? Anyone else dealt with this?
Yes, my rear passenger shock is blown out at this moment. Dealer was going to fix it under warranty but didn't ship all necessary parts. After the mechanic explained to me how my PTU was setup (completely wrong), I said don't touch my car again and will wait to put the coilovers on.
I wonder if Megan would sell just the shock portion for the rear?
Rich
To add to that^^^^
Was going to be a $107 charge to replace. I asked how much the shock would cost...$270. I chuckled a little and said I got upgraded springs and the shock for that corner cheaper.
Oh that look...the one of, I just don't know what to say. Many times I saw that look on the visit.
A bit terrifying knowing they were working on my car.
Rich
^^ lol
I'd just replace myself if a better alternative was available.
Here is email from my service advisor:
MR HARRIS, I AM GLAD TO HELP YOU, BUT I AM FULL-UP THIS WEEK. PLZ CALL WHEN YOU RETURN FROM YOU TRIP AND WE'LL GO FROM THERE. SOME SEEPAGE/SWEAT IS CONSIDERED NORMAL. IF THE SHOCK IS WET, THEN FORD WILL REPLACE THEM. THEY WILL ONLY REPLACE THE ONE THAT IS ACTIVELY MALFUNCTIONING, UNDER THE WARRANTY. THANK YOU, PAUL
Meh. I'll monitor it and get it replaced next month.
If it makes you feel any better, PM, this is a common practice. Look at this guideline from Infiniti:
http://www.infinitig37.com/TSB/ITB99-001a.pdf (http://www.infinitig37.com/TSB/ITB99-001a.pdf)
and Toyota:
http://media.fixed-ops.com/Toy_ServiceBulletins/sb0145t11.pdf (http://media.fixed-ops.com/Toy_ServiceBulletins/sb0145t11.pdf)
They figure, out of sight, out of mind. Who the heck cares about a balanced suspension anyway?
Just visit Michigan, we'll get those shocks blown out evenly no problem...lol
Rich
I had a chance to change the plugs today and went relativly smooth,figured check to see if there was any oil in the cac with the oil dipstick,was amazed how much oil was inside with the car being level.Z
Wonder if dealership would be smart enough to tell leaked shock oil from strategically placed shock oil? Just Saying!
Ha, I bet not!
Quote from: ZSHO on April 06, 2015, 03:24:15 PM
I had a chance to change the plugs today and went relativly smooth,figured check to see if there was any oil in the cac with the oil dipstick,was amazed how much oil was inside with the car being level.Z
That's not too bad, but could become scary! Supposedly more oil accumulates on the OTHER bottom end of the CAC, too! Cleaned it before, Z?
Quote from: ZSHO on April 06, 2015, 03:24:15 PM
I had a chance to change the plugs today and went relativly smooth,figured check to see if there was any oil in the cac with the oil dipstick,was amazed how much oil was inside with the car being level.Z
When I checked mine last fall, it was slightly less than that...slightly meaning very close.
Something I should do again shortly.
Rich
If you jack up the drivers side when the cac is warm the oil will flow over. That's how I removed it with my fluid extractor. Other have zipped tied shop rags to their dip stick and soaked it up.
Need that Z2S intercooler NOW!
Quote from: SHOdded on April 06, 2015, 06:11:02 PM
Quote from: ZSHO on April 06, 2015, 03:24:15 PM
I had a chance to change the plugs today and went relativly smooth,figured check to see if there was any oil in the cac with the oil dipstick,was amazed how much oil was inside with the car being level.Z
That's not too bad, but could become scary! Supposedly more oil accumulates on the OTHER bottom end of the CAC, too! Cleaned it before, Z?
Actually that was my first time doing that at 22k,the bigger issue is the hotpipe that connects from the tb to the cac(intercooler)side inlet was bent a little by the t-bolt clamp,dont have pics at the moment,thanks.Z
That T-bolt means business!
I guess sometimes its worth to get your hands dirty and have a look for yourself on the very aspect such as oil in your cac like many have performed,after seeing oil inside leads me to believe preventative maintenance is in order,that map sensor before the tb is so vulnerable to oil and dirt,would grab a can of maf cleaner every oil change and actually clean both of them,especially being so simple such as removing a few screws,so if your experiencing any hestation that will be a good easy place to start.Z
Quote from: ZSHO on April 07, 2015, 08:23:55 AM
I guess sometimes its worth to get your hands dirty and have a look for yourself ...
Exactly, enjoy spending some time with your ride, take care of it and it will take care of you :)
Dirty girl needs a bath...
Much better...
Love that color.
Quote from: FoMoCoSHO on April 08, 2015, 09:58:05 PM
Much better...
Luckily im not a woman,probably arouse my nipples,especially in the car wash.LOL
Quote from: IHeartGroceries on April 08, 2015, 10:05:48 PM
Love that color.
Me too.. I dont think there is a bad color for the SHO.. i usually want a black car, but this is the first car i didn't want black :) But i didnt want silver either.
Congrats on the purchase FoMoCo
Quote from: panther427 on April 08, 2015, 10:20:41 PM
Quote from: IHeartGroceries on April 08, 2015, 10:05:48 PM
Love that color.
Me too.. I dont think there is a bad color for the SHO.. i usually want a black car, but this is the first car i didn't want black :) But i didnt want silver either.
Congrats on the purchase FoMoCo
Thanks.
In order I wanted...
Deep Impact Blue
Tri White
Ruby Red
This color wasn't on the list at all, and I was really unsure but I'm glad I took the chance.
Headturner for sure!
In general wish there was more respect shown to each member here on this fine forum and the same respect and courtesy that was shown to you when you first introduced yourself,another note to mention the same reverence should also apply to our esteem vendors here on the forum which contribute there time in helping us learn more about the E.B platform,the lack of respect and batter should come to an end.Z
Quote from: ZSHO on April 09, 2015, 08:35:02 AM
In general wish there was more respect shown to each member here on this fine forum and the same respect and courtesy that was shown to you when you first introduced yourself,another note to mention the same reverence should also apply to our esteem vendors here on the forum which contribute there time in helping us learn more about the E.B platform,the lack of respect and batter should come to an end.Z
Z, I'm not sure what your referring to but this is a pretty polite and respectful little corner of the internet.
As far as the vendors go, there will always be disagreements and calling someone out because you may have a different opinion isn't disrespectful, this is an internet forum and there will be disagreements and heated exchanges. I appreciate the vendors but that doesn't mean they are above criticism.
If someone bothers you, just engage the ignore feature on them.
As the recovering drunks like to say.....
Take what you like and leave the rest....
FoMoCoSHO couldn't have said it any better. I believe this forum is the most civilized of any forums I frequent. Also its important for vendors to be openly scrutinized (as well as praised) as to help the community be able to find answers and solutions to any problems they may have. Its the same as people reporting issues with their vehicles from the manufacturers to the government so that they can find issues and address them appropriately. If all it consisted of were butt kissing and praises all day long then vendors and manufacturers would simply take advantage of customers and it would be a lot tougher for people to see if they have a common issue or an isolated one and or how to resolve an issue. Look at all the PTU threads suddenly, a lot of people may be completely in the dark if it wasn't for things like that being discussed, and even the air intakes and how they may be a complete waste of money on these vehicles. (keep in mind these are just examples) Civilized discussion and the ability to take criticisms and how you respond is what contributes to the community and helps further the advancement of knowledge, whether you be a vendor or a customer or even just an enthusiast.
I agree, this is a good little forum. These are cars are still expensive enough that the little punks haven't gotten their hands on them yet! lol
Compared to other forums, this one is a gem. I've experienced nothing but civility here.
Sometimes it makes things interesting, though, when we get pot stirers.
And there's nothing wrong with "going against the grain", for the sake of challenging what might otherwise be accepted as fact.
You want disrespectful, pay a visit to MSF.
I have always supported and endorsed this fine forum in many aspects and even eulogized a while back to Mike B about the awesome Administrators and moderators here at E.B.P.F ,heck even donated last week which must tell you something,and of course you get some bad apples anywhere you go and nothing and no one is perfect,lets just leave it at that.Z
Yea Z, this forum is great, I was glad to donate. I came from the toxic explorer forums where if it ain't stock it ain't $*** mantra was rampant, people would disagree for no reason other than to disagree. My local car scene Facebook is a constant stream of bashing and drama lol. Like you said, we all get it enough elsewhere we don't need to bring it in here, but we definitely need to not be afraid to speak our minds in fear of retaliation. I definitely frequent this forum more than any other because of this respectful community of ecoboost lovers
Sent from my iPad using Tapatalk
What's the longest road trip some of you have done in a sho? Or anything else for that matter.
Looking at making a 3300 mile trip this summer.
Not sure if I can bring enough meth with me.. :-[
I would personally try to disable the meth kit before making a trip like that,just for precautionary measures1)running out of methanol ,2)hot summer months combined with unlimited,extended driving,with extra heat transfer =more strain on engine and especially on the meth kit,3)Bad gas from different states could affect performance,made two 2400 miles trips and felt the overall lack of performance due to the poor quality fuels in some states,and the long term durability and progression of the meth kit to function properly would lead me to be more hesitant on making such a long trip.Z
I took the SHO to the outer banks last summer from NE OHIO. It was about 2000 miles round trip. It was nice having all that torque going through West Virginia with a full trunk/back seat.
I want downpipes...
Quote from: ZSHO on April 12, 2015, 06:32:58 PM
I would personally try to disable the meth kit before making a trip like that,just for precautionary measures1)running out of methanol ,2)hot summer months combined with unlimited,extended driving,with extra heat transfer =more strain on engine and especially on the meth kit,3)Bad gas from different states could affect performance,made two 2400 miles trips and felt the overall lack of performance due to the poor quality fuels in some states,and the long term durability and progression of the meth kit to function properly would lead me to be more hesitant on making such a long trip.Z
I'd rather have the meth to protect against super hot boost temps in the mountains and desert. I will be putting alcohol in the fuel to combat the random bad gas but I'll try to get to a shell station on each fill up.
As for the kits durability, I am not concerned at all about it. I have the pump mounted with plenty of shock protection as well as using braided lines.
I'd like to think everything will hold together but there is only one way to find out. ::)
I would personally like to take the opportinity to give a big CONGRATS to SHOnUup Rich which ran a 12.42 the other day with a tune from Livernois Motorsports and an intake,and possibly the best time with only a tune and cai,Congrats on a well deserved achievment buddy.Z
Quote from: ZSHO on April 15, 2015, 10:50:36 AM
I would personally like to take the opportinity to give a big CONGRATS to SHOnUup Rich which ran a 12.42 the other day with a tune from Livernois Motorsports and an intake,and possibly the best time with only a tune and cai,Congrats on a well deserved achievment buddy.Z
That is quite impressive...perhaps a little bit of a factory freak going on. What track was this accomplished at?
Quote from: ZSHO on April 15, 2015, 10:50:36 AM
I would personally like to take the opportinity to give a big CONGRATS to SHOnUup Rich which ran a 12.42 the other day with a tune from Livernois Motorsports and an intake,and possibly the best time with only a tune and cai,Congrats on a well deserved achievment buddy.Z
You're too kind my friend!
The congrats is greatly appreciated, as I'm just trying to perfect my visits to the track each time I go.
Without the help and wealth of knowledge from you guys on the forums, I'd be lost. So this is a time we should all be proud of for the platform.
Rich
Quote from: SHO-Time on April 15, 2015, 11:13:02 AM
Quote from: ZSHO on April 15, 2015, 10:50:36 AM
I would personally like to take the opportinity to give a big CONGRATS to SHOnUup Rich which ran a 12.42 the other day with a tune from Livernois Motorsports and an intake,and possibly the best time with only a tune and cai,Congrats on a well deserved achievment buddy.Z
That is quite impressive...perhaps a little bit of a factory freak going on. What track was this accomplished at?
Milan dragway was the venue...DA was 650ish at time of the 12.4211
Rich
Quote from: SHO-Time on April 15, 2015, 11:13:02 AM
Quote from: ZSHO on April 15, 2015, 10:50:36 AM
I would personally like to take the opportinity to give a big CONGRATS to SHOnUup Rich which ran a 12.42 the other day with a tune from Livernois Motorsports and an intake,and possibly the best time with only a tune and cai,Congrats on a well deserved achievment buddy.Z
That is quite impressive...perhaps a little bit of a factory freak going on. What track was this accomplished at?
And thanks also...car was built on a Wednesday 2 days after Valentines day, so I think there may be a little extra love in this one.
Rich
That's a very impressive time! Wow.
Congrats! Car must really feel good.
That sucker scoots.
Damn that's an amazing run, congrats! Can't wait to see what meth and downpipes will do. 11 sec club possibly.
Awesome stuff, grats. I'd love to run anywhere with a da lower than the average 3500 I have here
Thanks guys. I took 3 CAI'S on this day. All had best times within .02 of each other. Write up in the works.
Here's a video I found of the day on YouTube. I run right at the 2 minute mark and a little into the 25th minute. 60' times were 1.77 on the stock RSA'S.
https://youtu.be/bvBl1ab1H9o
Rich
I was planning a trip to the track this week and unfortunetly today while backing out of my driveway heard a clunk sound coming from the rear of the car which didnt sound good,checked both rear shocks and they seem fine,called my service advisor and said to bring it in tommorrow am,well see what happens,lifes unexpected obstacles sometimes have a meaning behind it.Z
Batteries and motor oil are making my head spin.
Quote from: ZSHO on April 16, 2015, 09:57:20 PM
I was planning a trip to the track this week and unfortunetly today while backing out of my driveway heard a clunk sound coming from the rear of the car which didnt sound good,checked both rear shocks and they seem fine,called my service advisor and said to bring it in tommorrow am,well see what happens,lifes unexpected obstacles sometimes have a meaning behind it.Z
You seem to be in great hands with your dealer. Bet whatever it is, they take care of ya.
Rich
Gool luck at the dealer's, Z. Any possibility of the muffler/exhaust making contact with the pavement?
For those of you that use Facebook. I started an ecoboost related page.
I invite everyone to join. No bashing or disrespect towards others will be tolerated.
Ecoboost Enthusiasts
Rich
http://www.shelbyamerican.com/Baja700.asp (http://www.shelbyamerican.com/Baja700.asp)
Got to drive home from the Denver airport last night, 80 miles in a snow storm on my half bald Goodyear SuperCar tires! T/C light was on going up a pass half of the time, fun times! Couldn't feel my fingers after I got home from gripping the wheel so tight lol.
Going to drive the wife's Durango this weekend, don't want to put my winter tires on again. Probably going to buy some Conti DWS tires soon.
Got over 15" of snow and still coming down.
How she looks this morning:
Glad to hear you made it home without any trouble. Must have been some serious white knuckle driving.
And to think how nice it been in Colorado last week. We didn't get much snow on the northern plains. But its been raining non Stop. Glad you made it home safe
Wow, it's April, right? Glad you made it safe, PM, you gotz good skillz :thumb:
I know the front brake pads the options are kind of limited,especially a high performance pad,had very good experiences with the Akeebono on my other cars.Z ProACT Ultra Premium Ceramic Pad w/ Premium Stainless Hardware
Akebono Pro-ACT Ultra-Premium brake pads are the aftermarket's only OE-validated, application-specific friction formulations. Pro-Act Ultra Premium brake pads apply the same materials, engineering, quality standards and advanced technologies used to create OE ceramic brake pads. This guarantees that Pro-ACT Ultra-Premium brake pads provide the ultimate braking experience.
ProAct Ceramic Disc Brake Pads are engineered to eliminate noise, vibration and harshness. In addition to dramatically quieter braking, ProACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel and ultra-low dusting for cleaner wheels and tires. Ceramic technology also causes minimal wear on brake rotors.
• Harmonically damped design for maximum control of NVH
• Vehicle-optimized ceramic formulas for superior performance that is unmatched by "one size fits all" brands
• Post cured and heat scorched to ensure the highest initial effectiveness requiring no "break-in procedures" (exclusive to front formulations)
• "Rotor-friendly" pad formulations prevent uneven rotor wearing and pulsation complaints
• Precision-fit steel backing plates lead the industry in reducing vibration induced noise
• 100% chamfered and slotted to further enhance NVH control
• High resistance to fade with fast recovery
• Precision-fit shims aid in noise abatement and prevent shim migration
• Black powder coat finish provides OE-level corrosion resistance
• 100% asbestos-free formulations
•High-temperature resistant moly lube included in all boxes
http://www.rockauto.com/info/Akebono/proActChart.jpg (http://www.rockauto.com/info/Akebono/proActChart.jpg)
Which rotors do they pair well, with, Z?
Quote from: SHOdded on April 19, 2015, 07:53:40 AM
Which rotors do they pair well, with, Z?
I would personally stick with the oem Rotors considering both are vented,would test them out in the front to see if there is any noticeable difference in stoppping power due to the ceramics vs the semi-metallic oem pads and if so then change the rears out.Z
What are a set of flower wheels going for nowadays? Thinking of selling mine since I can't see a scenario where I'd put them back on.
I apologize if this topic was brought up before,just was curious how many miles are you getting with your original pads,rotors,cause changed my front rotors and pads under warranty at 22k,now over the weekend noticed the car is harder to stop,checked rear rotors and felt some uneven groves which leads me to believe its the rears now going,getting a little fustrated,cause car has 23k on her and over 4k was on long unlimited trips,thanks.Z
http://blog.caranddriver.com/ford-ecoboost-engines-reach-the-5-million-mark/ (http://blog.caranddriver.com/ford-ecoboost-engines-reach-the-5-million-mark/)
It's raining snails!
Why is choosing an oil such a hard thing.
But i do love my local napa store. They carry Amsoil, Redline, Liqui Moly, and Enos syns.
Quote from: ZSHO on April 20, 2015, 09:15:45 AM
I apologize if this topic was brought up before,just was curious how many miles are you getting with your original pads,rotors,cause changed my front rotors and pads under warranty at 22k,now over the weekend noticed the car is harder to stop,checked rear rotors and felt some uneven groves which leads me to believe its the rears now going,getting a little fustrated,cause car has 23k on her and over 4k was on long unlimited trips,thanks.Z
I was at 33k+ when I traded and the brakes were still good.
Quote from: panther427 on April 20, 2015, 04:57:29 PM
Why is choosing an oil such a hard thing.
But i do love my local napa store. They carry Amsoil, Redline, Liqui Moly, and Enos syns.
Lucky, I have to order all my oil. Shipping kills if it's not on amazon.
Quote from: wasinger3000 on April 20, 2015, 05:05:17 PM
Quote from: panther427 on April 20, 2015, 04:57:29 PM
Why is choosing an oil such a hard thing.
But i do love my local napa store. They carry Amsoil, Redline, Liqui Moly, and Enos syns.
Lucky, I have to order all my oil. Shipping kills if it's not on amazon.
Though im seriously thinking of running Shell T6 0w-40 in the car...
Quote from: panther427 on April 20, 2015, 10:00:26 PM
Quote from: wasinger3000 on April 20, 2015, 05:05:17 PM
Quote from: panther427 on April 20, 2015, 04:57:29 PM
Why is choosing an oil such a hard thing.
But i do love my local napa store. They carry Amsoil, Redline, Liqui Moly, and Enos syns.
Lucky, I have to order all my oil. Shipping kills if it's not on amazon.
Though im seriously thinking of running Shell T6 0w-40 in the car...
What makes you want to go with T6? It's a good oil but I'd think redline would be just as formidable.
Quote from: panther427 on April 20, 2015, 10:00:26 PM
Quote from: wasinger3000 on April 20, 2015, 05:05:17 PM
Quote from: panther427 on April 20, 2015, 04:57:29 PM
Why is choosing an oil such a hard thing.
But i do love my local napa store. They carry Amsoil, Redline, Liqui Moly, and Enos syns.
Lucky, I have to order all my oil. Shipping kills if it's not on amazon.
Though im seriously thinking of running Shell T6 0w-40 in the car...
I wouldn't run a 40 weight. You will never get that oil hot enough. You will have increased oil pressure which the turbos are already having a hard time with. Thicker oil will give you increased oil pressure
Not 100% sure yet, but with the technology of the ecoboost motors being very similar to diesel motors the T6 might actually be of better use in our motors.
This is just a thought no proof or anything of that sort, but the diesel oils are designed with a strong cleaning package to reduce or hold soot in suspension.
plus they are designed with a thought to strong sheer resistance and a few other points. Plus its A LOT CHEAPER :)
5 gallon jug is $20 and right now there is a $5 mail in rebate, and 1 quart bottles are $6 to $7 dollars, plus a 8 dollar filter puts you cheaper than the oil change specials for the normal mobil 1, Castrol Edge ect. Considering you still have to buy an extra quart of oil that puts you over $45 dollars usually.
I have no problem running a 0w-40 or 5w-40 in the summer at all. And only limited hesitation in the winter.
I'll work in SOPUS lubricants one day...
Quote from: panther427 on April 20, 2015, 10:22:46 PM
I have no problem running a 0w-40 or 5w-40 in the summer at all. And only limited hesitation in the winter.
You wouldn't know a problem if you had one.....You'd have to monitor oil pressure....It wouldn't be anything you could feel. If you were running the car on a road coarse you could potentially get the oil hot enough to thin to get oil pressure back down to stock levels
I would compare the MSDS/PDS for both the Motorcraft 5W30 and the T6 xW-40 to see how wide of a gap the differences are (at the very least). Def don't want those oil passages flowing anything less than freely.
3 days in sunny Ft. Lauderdale... Saving on sunscreen! .... At least the food is good, LOL
(http://i1331.photobucket.com/albums/w596/knot2bfound/Mobile%20Uploads/image_zpscsnq33ld.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Mobile%20Uploads/image_zpscsnq33ld.jpg.html)
Welcome back Tom,hope you had a relaxing and peaceful time,did you miss your SHO.Z
Too bad about the rainy days, BiGMaC, but I hope the food did make up for it. Some of the best & freshest I've had has been in FL.
Quote from: SHOdded on April 23, 2015, 05:28:09 PM
Too bad about the rainy days, BiGMaC, but I hope the food did make up for it. Some of the best & freshest I've had has been in FL.
Agreed... Eating all local seafood... Cobia with blue crab tonight... Hope there's sun tomorrow or no beach this trip.
Z...thx, not home yet, & Yes... Can't even enjoy s beach quad or a jet ski with the weather.
Quote from: BiGMaC on April 23, 2015, 04:58:13 PM
3 days in sunny Ft. Lauderdale... Saving on sunscreen! .... At least the food is good, LOL
(http://i1331.photobucket.com/albums/w596/knot2bfound/Mobile%20Uploads/image_zpscsnq33ld.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Mobile%20Uploads/image_zpscsnq33ld.jpg.html)
I would take rain any day compared to this...
It's freakin late April...(http://images.tapatalk-cdn.com/15/04/23/20782309c5c051fc055624ffcc8134aa.jpg)
Quote from: glock-coma on April 23, 2015, 09:44:31 PM
Quote from: BiGMaC on April 23, 2015, 04:58:13 PM
3 days in sunny Ft. Lauderdale... Saving on sunscreen! .... At least the food is good, LOL
(http://i1331.photobucket.com/albums/w596/knot2bfound/Mobile%20Uploads/image_zpscsnq33ld.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Mobile%20Uploads/image_zpscsnq33ld.jpg.html)
I would take rain any day compared to this...
It's freakin late April...(http://images.tapatalk-cdn.com/15/04/23/20782309c5c051fc055624ffcc8134aa.jpg)
Global warming for you,LOL
Started the sho for the first time in 16 days. :)
Also I remote started the car with my phone but left the fob in the cup holder and when I open the door this countdown timer popped up in the screen and started beeping faster and faster as the numbers counted down saying car alarm will activate. Hah. Curious as I was I let it get to zero, it shut the car off and started the alarm. It wouldn't shut off either. I pushed the lock button on the fob, pressed the brake and start button, only thing that stopped it was pressing the lock button on the phone app.
It was an exciting experience to say the least haha.
Hopefully you did it in a quiet residential area or in a hospital zone ;) I guess it's a safety feature that the originating device has to shut off the alarm?
I think so, what ever started the car is the only one that can deactivate it. Which is good because if someone stole the fob I could keep them from driving off with my car.
I know it's possible to recreate the same signal the fob produces and allow someone to steal the car but I think it would take them a little while. That and it's not exactly worth all that trouble haha.
I'll do it again and take a pic of it.
Quote from: wasinger3000 on April 25, 2015, 09:02:29 PM
Started the sho for the first time in 16 days. :)
Also I remote started the car with my phone but left the fob in the cup holder and when I open the door this countdown timer popped up in the screen and started beeping faster and faster as the numbers counted down saying car alarm will activate. Hah. Curious as I was I let it get to zero, it shut the car off and started the alarm. It wouldn't shut off either. I pushed the lock button on the fob, pressed the brake and start button, only thing that stopped it was pressing the lock button on the phone app.
It was an exciting experience to say the least haha.
Oooh...intense moment for sure. Lol
I can imagine the scramble and array of button pushing that took place...as I'd probably be doing the same scramble.
Rich
That could be a useful practical joke 😂
I figure would post a couple of updated work orders related to the front and rear rotors and pads,since Ford always seems to be updating there part #,figured it will help someone from the confusion.Z
What are some of you guys using as a paint protectant? Also what about a swirl remover that actually works?
I've spent a few hours on forums reading into products but most have mixed opinions, as with everything.
I saw a good article regarding BMW,Mercedes turbocharged vehicles having issues with carbon buildup,wastegate and turbo issues,and adding a few gallons of E85 to give it a little boost,at the sametime activating your built in tuner,pretty cool stuff.Z http://oppositelock.jalopnik.com/10-reasons-the-e60-535i-is-better-than-the-m5-1608323644 (http://oppositelock.jalopnik.com/10-reasons-the-e60-535i-is-better-than-the-m5-1608323644)
Good read, Z!
Anyone here put a usb charging port in the clove box yet?
Thought there was one in the center console
Quote from: panther427 on May 13, 2015, 04:44:24 PM
Thought there was one in the center console
There is lol. I just don't like wires hanging around so I'd like to put one in the glove box so I could charge stuff inside.
Ok thought I missed something. It should be a simple addition
Looking for an opinion...
Should I try to trade my car for another sho with the color I really want or just keep what I have.
If I did trade I'd want one in the Magnetic color with nav, moonroof, and the driver assist package.
Things keeping me from trading are, I bought my sho with 10k miles so it's still in excillent shape with zero issues and an extended warranty and I have my mods done to it already.
Right now there are some good prices on SHO's so I could make an even trade I think.
Sure, go for it. Life is too short to drive something you don't want. Does your SHO have any options?
I'm kind of considering trading in my SHO for a 2015 Power Wagon that gets 12MPG on a good day. But I love my SHO too much. Trying to figure a way to have both, along with getting the wifey into a new SUV. Need to win the powerball....
Quote from: PokerMunkee on May 14, 2015, 04:25:59 PM
Sure, go for it. Life is too short to drive something you don't want. Does your SHO have any options?
I'm kind of considering trading in my SHO for a 2015 Power Wagon that gets 12MPG on a good day. But I love my SHO too much. Trying to figure a way to have both, along with getting the wifey into a new SUV. Need to win the powerball....
I have all the options I care to have which is nav and moonroof. I hate how ford won't let you get the PP with the driver assistance package.
What makes you want the power wagon so much? Most tests the raptor out performed it. Plus the new raptor will have the 3.5.
It's a 3/4 and looks awesome. It's a rock crawler and the Raptor is a desert runner. Front/rear lockers, electronic sway bar disconnect, 12k lb winch, push button start, heated steering wheel, uconnect, ram box, etc etc that's better than current Raptor. Raptor won't get 3.5 until 2017.
Get a Laramie in granite just like this: https://www.youtube.com/watch?v=kYMSQtvu7HQ (https://www.youtube.com/watch?v=kYMSQtvu7HQ)
Quote from: PokerMunkee on May 14, 2015, 05:30:13 PM
It's a 3/4 and looks awesome. It's a rock crawler and the Raptor is a desert runner. Front/rear lockers, electronic sway bar disconnect, 12k lb winch, push button start, heated steering wheel, uconnect, ram box, etc etc that's better than current Raptor. Raptor won't get 3.5 until 2017.
Get a Laramie in granite just like this: https://www.youtube.com/watch?v=kYMSQtvu7HQ (https://www.youtube.com/watch?v=kYMSQtvu7HQ)
Sounds like you have your mind made up lol. It would be an awesome toy for the mountains but I wouldn't want to daily drive it.
I love how tall it is. Do you still have to unlink the front suspension for longer travel?
Quote from: wasinger3000 on May 14, 2015, 04:23:14 PM
Looking for an opinion...
Should I try to trade my car for another sho with the color I really want or just keep what I have.
If I did trade I'd want one in the Magnetic color with nav, moonroof, and the driver assist package.
Things keeping me from trading are, I bought my sho with 10k miles so it's still in excellent shape with zero issues and an extended warranty and I have my mods done to it already.
Right now there are some good prices on SHO's so I could make an even trade I think.
I'm very happy I traded up.
Love the PP and the car is just put together better.
Good luck finding that color unless you order.
There's a SHO heading to the track tonight that's shooting for mid 11's. Weather permitting.
Rich
Quote from: SHOnUup on May 15, 2015, 04:20:32 PM
There's a SHO heading to the track tonight that's shooting for mid 11's. Weather permitting.
Rich
Let him know we're all rooting for him!
A thought for team corn. I see some of you look for gas that has exactly 10% ethanol in it to start your blend. I understand that you may do this so that you know exactly how much ethanol is in the gas. My question is if you have 93 octane gas with 10 % ethanol as your base gas then you spike it to 20% with E85 wouldn't your gas be a lower overall octane than if you used 93 octane pure gas then added the required amount of E85 to make it 20%? If the gas only has to be rated at 93 octane from the pump I would think that they are going to use lower grade gas and rely on the 10% ethanol to get to the 93 octane.
Sunwolf, you are 100 percent correct.
The flip side is that when the E is directly injected, it is basically E on a meth binge. So while not optimum, still many benefits.
Bought the wife a new Armada Platinum today. Was the best truck for us in size, price, and capability. Needed a 3rd row SUV that could tow, so selection was limited. Came down to GM Tahoe/Burb/Yukons, Expedition, and Armada. Got the Armada for $49K with 0%/72 financing through Nissan, lifetime powertrain warranty, and they extended B2B to 84/84K. Stickered at $55K. Also got window tint, 3m bra, and nitrogen. Decent deal, around $8-10K cheaper than GM and Ford offered.
Missing some new tech stuff, like blind spot monitoring, rain sense wipers, HIDs/LEDs, which is why it's cheaper. Has all the important stuff, and wife loves it, so that's all that matters. The 5.6 sounds good in stock form, gotta love V8s. Sounds better than her 2007 Durango 5.7 HEMI we traded in. Durango had 120K trouble free miles, was time to upgrade. Got $7K for it, so I'm happy. Paid $20K for it 6 years ago with 40K miles.
(https://scontent-lax.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/11047872_10153300359669985_8960422110789244425_n.jpg?oh=74b8f0696315921c6b45e847d6906e32&oe=55D30439)
Congrats on the new ride, PM! Hope it gives you nothing but troublefree miles of joy :) Cute kids!!!
I found some pretty cool videos related to misfires and turbos,hope it helps someone . Z https://www.youtube.com/watch?v=cJBG2r1a5qg (https://www.youtube.com/watch?v=cJBG2r1a5qg) https://www.youtube.com/watch?v=5ru5kyKrQXg&list=PLQSWzOHR3Di_w4nmSvMav-b_e2YQBDEGX (https://www.youtube.com/watch?v=5ru5kyKrQXg&list=PLQSWzOHR3Di_w4nmSvMav-b_e2YQBDEGX)
Well this is annoying...(http://images.tapatalk-cdn.com/15/05/23/5ab7cea371d9f12b2350ac7f3f0424af.jpg)
ecoboostsho & glock remind on another thread that elm327 adapters can cause all kinds of issues. Though usually that'd be a Christmas Tree effect.
Any issues with fuel pump pressures lately? Could be a dying fuel pump or module.
Quote from: SHOdded on May 23, 2015, 11:58:56 PM
ecoboostsho & glock remind on another thread that elm327 adapters can cause all kinds of issues. Though usually that'd be a Christmas Tree effect.
Any issues with fuel pump pressures lately? Could be a dying fuel pump or module.
Yup that's happened to me, when I have started my car in the past with the torque app on and connected to the car the dash lit up, even gave me a low oil pressure on the dash. Happened at the track gave me a freaking heart attack!
Sent from my iPhone using Tapatalk
Wishing a safe and happy Memorial Day to all!
Take a minute during your day to remember all those who served and sacrificed so that we can celebrate every year.
Quote from: BiGMaC on May 24, 2015, 11:57:53 PM
Wishing a safe and happy Memorial Day to all!
Take a minute during your day to remember all those who served and sacrificed so that we can celebrate every year.
Amen to that!
Quote from: SHOdded on May 25, 2015, 05:24:58 AM
Quote from: BiGMaC on May 24, 2015, 11:57:53 PM
Wishing a safe and happy Memorial Day to all!
Take a minute during your day to remember all those who served and sacrificed so that we can celebrate every year.
Amen to that!
Indeed
It was actually my Birthday yesterday and quite honestly did not do to much,guess my early B-day gift was able to attend the CAD last Sat which was a memorable event,wish i was able to stay longer but maybe next time will do some better planning before hand,and not a last minute decision,thanks Z
Been looking at those new 2015 Dodge Charger Scat Packs with 8-speed trans...they're kind of cool.
Many happy returns of the day, Z, and many more in wait!
Quote from: ZSHO on May 27, 2015, 10:12:06 AM
It was actually my Birthday yesterday and quite honestly did not do to much,guess my early B-day gift was able to attend the CAD last Sat which was a memorable event,wish i was able to stay longer but maybe next time will do some better planning before hand,and not a last minute decision,thanks Z
Happy birthday Z!!!
Living vicariously through the kids bday's nowadays we are. Not all that bad.
Rich
Quote from: SHOdded on May 27, 2015, 01:02:40 PM
Many happy returns of the day, Z, and many more in wait!
Thanks -MANU,appreciate it. Z
Quote from: SHOnUup on May 27, 2015, 01:03:42 PM
Quote from: ZSHO on May 27, 2015, 10:12:06 AM
It was actually my Birthday yesterday and quite honestly did not do to much,guess my early B-day gift was able to attend the CAD last Sat which was a memorable event,wish i was able to stay longer but maybe next time will do some better planning before hand,and not a last minute decision,thanks Z
Happy birthday Z!!!
Living vicariously through the kids bday's nowadays we are. Not all that bad.
Rich
Thanks Rich,appreciate it. Z
Bought a new camper. First one, hoping for some fun memories with the family and get back into fishing.
2016 Sunset Trail ST270BH. It's a beast, 30' and 5500lb dry. Going to pull it with Armada for now. Looking for a $10K 3/4 truck to have as a beater and trailer hauler. If anyone knows of any in good shape, let me know. Probably a big gamble for a 12 year old truck. Should I stick with gas or go diesel?
Quote from: PokerMunkee on May 27, 2015, 02:16:25 PM
Bought a new camper. First one, hoping for some fun memories with the family and get back into fishing.
2016 Sunset Trail ST270BH. It's a beast, 30' and 5500lb dry. Going to pull it with Armada for now. Looking for a $10K 3/4 truck to have as a beater and trailer hauler. If anyone knows of any in good shape, let me know. Probably a big gamble for a 12 year old truck. Should I stick with gas or go diesel?
Congrats on the purchase. That's always been a dream of ours, nice camper.
Looks like an ecoboost F150 might be in store...;)
Guys love the towing of those things with all that low end torque.
Rich
Yeah, they definitely are the best 1/2 ton to tow with! I just can't give up my car for my commute.
You can get a 2004 Ram 2500 5.7 4x4 with 4.10s that is capable of towing almost 11K. That's all I'd need. Then can use it for a 3rd vehicle, move furniture, dump runs, etc. Also can get a F-250 with the 5.4L. or the GM 2500HD with 6.0l. Needs the gears or they can't tow as much as the wife's Armada (9K).
V
Quote from: PokerMunkee on May 27, 2015, 02:54:43 PM
Yeah, they definitely are the best 1/2 ton to tow with! I just can't give up my car for my commute.
You can get a 2004 Ram 2500 5.7 4x4 with 4.10s that is capable of towing almost 11K. That's all I'd need. Then can use it for a 3rd vehicle, move furniture, dump runs, etc. Also can get a F-250 with the 5.4L. or the GM 2500HD with 6.0l. Needs the gears or they can't tow as much as the wife's Armada (9K).
For that price I think the Dodge would be a safe bet. Might be able to get an 06-08 f250 in that price range as well.
Edit:
http://m.cars.com/vehicledetail/#vdp?listingId=630810186
http://m.cars.com/vehicledetail/#vdp?listingId=609031138
This one gets my vote for now until I find a better one. I love the KR and V10
http://m.cars.com/vehicledetail/#vdp?listingId=637564334
(http://images.tapatalk-cdn.com/15/05/28/ca6086833f7ebe3490b78a98dd31a9f3.jpg)
Sent from my iPhone using Tapatalk
^ Good one!
Weight reduction....Lol
(http://images.tapatalk-cdn.com/15/05/28/b1449d5bf2981c907c771d5eb9327fa6.jpg)
Rich
^ Now that's some serious weight reduction! Move over rolled steel tubes!!!
Anyone know anything about a 2011 F-250 6.2L?
http://denver.craigslist.org/cto/5034729929.html (http://denver.craigslist.org/cto/5034729929.html)
190k miles on a 6.2L 4X4. What do you think? Does this year/drivetrain have known issues?
Going to look at the truck in a few hours. Window sticker: http://fordlabels.webview.biz/webviewhybrid/WindowSticker.aspx?vin=1ft7w2b68bec30062 (http://fordlabels.webview.biz/webviewhybrid/WindowSticker.aspx?vin=1ft7w2b68bec30062)
Nicely equipped F-250 XLT. No body damage, just missing plastic piece on tail gate.
If it checks out good (A/C works, no leaks/rips) and drives nice on the highway at 70mph, I'm taking it home. Hopefully can get it under $8K. I think it's a safe gamble and will be a fun beater truck that will tow our camper.
Have any service history for it?
Sent from my iPhone using Tapatalk
Pulled CarFax. Maintained at a dealer every 5-9k miles. Had tranny checked last month. No accidents.
That looks like a good deal for $8k
Sent from my iPhone using Tapatalk
Going to buy it for $8,300. All he would deal, which I dont blame him. Needs a good detail in/out and an alignment (steering wheel a bit off center). Going to have a shop look it over and replace up to $500 off stuff if it needs it. It drove fine. The shift on the fly 4wd worked fine. A/C nice and gold. Everything worked. Only a few minor dings. Tailgate is a bit banged up, might find one from a jun yard.
Now to find out which black fender fares, black wheels, and tune to get :D Not sure if I will lift it, just needs bigger tires.
Nice! I considering buying this: it's an '89 SHO with 105k miles. Been sitting in a garage for 5-6 years. Needs cv joints. $500 (http://images.tapatalk-cdn.com/15/05/30/d6a423d6f0f48d5e1cde32f0e9f459ac.jpg)(http://images.tapatalk-cdn.com/15/05/30/f30b1381818b36ad8d39d5ae4e47bf5e.jpg)
Sent from my iPhone using Tapatalk
Quote from: jtoddk98 on May 30, 2015, 12:11:44 PM
Nice! I considering buying this: it's an '89 SHO with 105k miles. Been sitting in a garage for 5-6 years. Needs cv joints. $500 (http://images.tapatalk-cdn.com/15/05/30/d6a423d6f0f48d5e1cde32f0e9f459ac.jpg)(http://images.tapatalk-cdn.com/15/05/30/f30b1381818b36ad8d39d5ae4e47bf5e.jpg)
Sent from my iPhone using Tapatalk
Look on SHOFORUM, guy has a real solid 95 ATX for 1700 obo.
Rich
http://www.shoforum.com/index.php?threads/129965/
Rich
Deserves a rustfree existence.
Quote from: SHOdded on May 30, 2015, 01:05:33 PM
Deserves a rustfree existence.
I can't believe he hasn't sold it. I'd buy it if it wasn't that green...love green, just not that green.
Rich
Quote from: jtoddk98 on May 30, 2015, 12:11:44 PM
Nice! I considering buying this: it's an '89 SHO with 105k miles. Been sitting in a garage for 5-6 years. Needs cv joints. $500 (http://images.tapatalk-cdn.com/15/05/30/d6a423d6f0f48d5e1cde32f0e9f459ac.jpg)(http://images.tapatalk-cdn.com/15/05/30/f30b1381818b36ad8d39d5ae4e47bf5e.jpg)
Sent from my iPhone using Tapatalk
Check the spark plug wells also. Those valve covers are notorious for leaking. I had to chance all 6 o-rings on my old 90 sho.
Quote from: glock-coma on May 30, 2015, 03:28:48 PM
Quote from: jtoddk98 on May 30, 2015, 12:11:44 PM
Nice! I considering buying this: it's an '89 SHO with 105k miles. Been sitting in a garage for 5-6 years. Needs cv joints. $500 (http://images.tapatalk-cdn.com/15/05/30/d6a423d6f0f48d5e1cde32f0e9f459ac.jpg)(http://images.tapatalk-cdn.com/15/05/30/f30b1381818b36ad8d39d5ae4e47bf5e.jpg)
Sent from my iPhone using Tapatalk
Check the spark plug wells also. Those valve covers are notorious for leaking. I had to chance all 6 o-rings on my old 90 sho.
Main reason for wanting it is because it's a manual. Don't want an automatic. Want a manual weekend toy. For $500 it's worth a shot at putting it back on the road.
Sent from my iPhone using Tapatalk
I'm a dad for the 3rd time. This is my son. Looks like Car parts will be on hold for a while as he was my birthday present.
Man, that's awesome!!! Congrats!
I have been having ths intermitent rough idle for quite sometime know,had the car at the dealer last week where a buddy of mine works at,checked the car pretty thoroughly for any vacuum leaks,used the Ford IDS software to monitor and check for any misfires,fuel system and everything was fine,he mentioned that the 13+SHO have a common problem with a faulty injector as many of you are aware of,due to the holiday weekend wasnt able to check the injectors by putting a borescope in the engine and cranking the car over,the faulty injectors tend to leak even when the car is not firing,something to keep in mind is that a bad injector cannot be diagnosed with software or sct programmers,will keep you updated.thanks Z
Quote from: ZSHO on May 31, 2015, 08:00:00 AM
I have been having ths intermitent rough idle for quite sometime know,had the car at the dealer last week where a buddy of mine works at,checked the car pretty thoroughly for any vacuum leaks,used the Ford IDS software to monitor and check for any misfires,fuel system and everything was fine,he mentioned that the 13+SHO have a common problem with a faulty injector as many of you are aware of,due to the holiday weekend wasnt able to check the injectors by putting a borescope in the engine and cranking the car over,the faulty injectors tend to leak even when the car is not firing,something to keep in mind is that a bad injector cannot be diagnosed with software,will keep you updated on the situation.thanks Z
Bummer to hear of a possible issue here Z...but you seem to have found a diamond in the rough with your service guys. Lucky you.
Rich
Question for the gurus....did they make changes to the injectors from 4.1 to 4.2?
Rich
Quote from: SHOnUup on May 31, 2015, 08:11:22 AM
Question for the gurus....did they make changes to the injectors from 4.1 to 4.2?
Rich
No.
Quote from: bpd1151 on May 31, 2015, 08:19:46 AM
Quote from: SHOnUup on May 31, 2015, 08:11:22 AM
Question for the gurus....did they make changes to the injectors from 4.1 to 4.2?
Rich
No.
Thank you sir
Rich
Quote from: SHOnUup on May 31, 2015, 08:03:30 AM
Quote from: ZSHO on May 31, 2015, 08:00:00 AM
I have been having ths intermitent rough idle for quite sometime know,had the car at the dealer last week where a buddy of mine works at,checked the car pretty thoroughly for any vacuum leaks,used the Ford IDS software to monitor and check for any misfires,fuel system and everything was fine,he mentioned that the 13+SHO have a common problem with a faulty injector as many of you are aware of,due to the holiday weekend wasnt able to check the injectors by putting a borescope in the engine and cranking the car over,the faulty injectors tend to leak even when the car is not firing,something to keep in mind is that a bad injector cannot be diagnosed with software,will keep you updated on the situation.thanks Z
Bummer to hear of a possible issue here Z...but you seem to have found a diamond in the rough with your service guys. Lucky you.
Rich
Thanks Rich,been very fortunate to acquire such a cool dealer,all the diagnostic work and oil change for free(bring my own oil and filter)of course,and who doesnt like beer,LOL. Z
Quote from: ZSHO on May 31, 2015, 08:00:00 AM
The faulty injectors tend to leak even when the car is not firing,something to keep in mind is that a bad injector cannot be diagnosed with software or sct programmers,will keep you updated.thanks Z
Good luck, Z, you may be one of the first to catch this troublemaker preemptively!
Quote from: SHOdded on May 31, 2015, 09:18:50 AM
Quote from: ZSHO on May 31, 2015, 08:00:00 AM
The faulty injectors tend to leak even when the car is not firing,something to keep in mind is that a bad injector cannot be diagnosed with software or sct programmers,will keep you updated.thanks Z
Good luck, Z, you may be one of the first to catch this troublemaker preemptively!
Thanks -MANU,have been fortunate in many aspects,but truely the best experience is learning something new in life everyday,but yet the enlightenment from knowledgeable people like yourself and others makes this forum that more engaging. Z
I have been having this very intermitent gunk noise coming from the rear for the past couple of months,thought it was the rear sun shade hitting the rear glass but unfortunetly it wasnt the case,noticed recently the rear noise only sounds if the car has less than half a tank of gas,had the car at the dealer a whle ago and they checked the rear suspension and all was fine,couldnt produce the sound,maybe now will try leaving the car close to empty to see if it will emit the sound when visiting the dealer. Z
Nothing loose in the trunk, Z? Sometimes a jack or spare tire kit is not fastened fully. Also did the fuel pump recall affect your SHO?
quote author=SHOdded link=topic=463.msg77106#msg77106 date=1433340563]
Nothing loose in the trunk, Z? Sometimes a jack or spare tire kit is not fastened fully. Also did the fuel pump recall affect your SHO?
[/quote]No recall for me,and checked the trunk and the inflator kit was never removed and is on real tight,sounds like its coming from the gas tank,right underneath the drivers rear seat,nothing worse than a intermitent noise. Z
Aside from the 1/2 tank, any other specific circumstances that generate this clunk? Possibly fuel pump starting to quit, hope it's not the straps.
Quote from: SHOdded on June 03, 2015, 11:08:24 AM
Aside from the 1/2 tank, any other specific circumstances that generate this clunk? Possibly fuel pump starting to quit, hope it's not the straps.
Thats a very valid point MANU,my rough idle situation could be related possibly to the fuel pump,or the straps contributing to the noise which only happens at slow speeds on bumpy roads. Z
Will a mountain bike with the front wheel off, fit in the trunk of our SHOs?
After a short trip with Amsoil as the new oil....
WOW...I am a believer and will use nothing else going forward.
Rich
Quote from: SHOnUup on June 03, 2015, 03:46:04 PM
After a short trip with Amsoil as the new oil....
WOW...I am a believer and will use nothing else going forward.
Rich
Yeah, its no joke. Makes it quieter and smoother IMHO.
Should see a bump in MPGs as well.
I would stick to a 5k interval regardless of any mileage claims due to DI fuel dilution.
Which Amsoil should I use? Which filter? I am going to start changing my own oil.
Quote from: FoMoCoSHO on June 03, 2015, 03:48:33 PM
Quote from: SHOnUup on June 03, 2015, 03:46:04 PM
After a short trip with Amsoil as the new oil....
WOW...I am a believer and will use nothing else going forward.
Rich
Yeah, its no joke. Makes it quieter and smoother IMHO.
Should see a bump in MPGs as well.
I would stick to a 5k interval regardless of any mileage claims due to DI fuel dilution.
Night and day difference. The smoothness and overall less engine noise is remarkable.
I was a skeptic, no longer.
I used this.
(http://images.tapatalk-cdn.com/15/06/03/ec58e89214f86a19f26f6d037c0e7c70.jpg)
Rich
Do I hear 11.9 in the offing ...
Quote from: PokerMunkee on June 03, 2015, 04:16:58 PM
Which Amsoil should I use? Which filter? I am going to start changing my own oil.
I use signature 0-30
Quote from: SHOdded on June 03, 2015, 05:42:00 PM
Do I hear 11.9 in the offing ...
Ummm...I'd probably soil myself
Rich
Think amsoil is nice, try it with archoil. It's the ultimate combo.
The only additives i would add is to the fuel system once in a while,also based on the owners manuel they highly dont recommend using any oil additives,basically thats my own pesonal view. Z
Quote from: wasinger3000 on June 04, 2015, 09:32:59 AM
Think amsoil is nice, try it with archoil. It's the ultimate combo.
Have u put the archoil in your oil yet?
Sent from my iPhone using Tapatalk
Quote from: ZSHO on June 04, 2015, 10:34:27 AM
The only additives i would add is to the fuel system once in a while,also based on the owners manuel they highly dont recommend using any oil additives,basically thats my own pesonal view. Z
They also don't recommend using lowering springs, meth injection, exhaust, upgraded turbos, Cai, or tunes. I'd say the owners manual is more of a book of suggestions.
Quote from: wasinger3000 on June 04, 2015, 11:18:14 AM
Quote from: ZSHO on June 04, 2015, 10:34:27 AM
The only additives i would add is to the fuel system once in a while,also based on the owners manuel they highly dont recommend using any oil additives,basically thats my own pesonal view. Z
They also don't recommend using lowering springs, meth injection, exhaust, upgraded turbos, Cai, or tunes. I'd say the owners manual is more of a book of suggestions.
You are absolutly correct to point that out,but some of us like to read the manuel and use only a API certified sn/gl-5 oil made for our cars. Z
Quote from: ZSHO on June 04, 2015, 11:37:21 AM
Quote from: wasinger3000 on June 04, 2015, 11:18:14 AM
Quote from: ZSHO on June 04, 2015, 10:34:27 AM
The only additives i would add is to the fuel system once in a while,also based on the owners manuel they highly dont recommend using any oil additives,basically thats my own pesonal view. Z
They also don't recommend using lowering springs, meth injection, exhaust, upgraded turbos, Cai, or tunes. I'd say the owners manual is more of a book of suggestions.
You are absolutly correct to point that out,but some of us like to read the manuel and use only a API certified sn/gl-5 oil made for our cars. Z
I know. Just giving ya s***.
I have archoil in 5 vehicles currently with great results. Saved the 6.0 injectors already.
Quote from: wasinger3000 on June 04, 2015, 11:42:21 AM
Quote from: ZSHO on June 04, 2015, 11:37:21 AM
Quote from: wasinger3000 on June 04, 2015, 11:18:14 AM
Quote from: ZSHO on June 04, 2015, 10:34:27 AM
The only additives i would add is to the fuel system once in a while,also based on the owners manuel they highly dont recommend using any oil additives,basically thats my own pesonal view. Z
They also don't recommend using lowering springs, meth injection, exhaust, upgraded turbos, Cai, or tunes. I'd say the owners manual is more of a book of suggestions.
You are absolutly correct to point that out,but some of us like to read the manuel and use only a API certified sn/gl-5 oil made for our cars. Z
I know. Just giving ya s***.
I have archoil in 5 vehicles currently with great results. Saved the 6.0 injectors already.
I'm about to throw the oil additive in my car now. Been using the fuel stuff for about 1500 miles now.
Sent from my iPhone using Tapatalk
Quote from: jtoddk98 on June 04, 2015, 03:10:46 PM
Quote from: wasinger3000 on June 04, 2015, 11:42:21 AM
Quote from: ZSHO on June 04, 2015, 11:37:21 AM
Quote from: wasinger3000 on June 04, 2015, 11:18:14 AM
Quote from: ZSHO on June 04, 2015, 10:34:27 AM
The only additives i would add is to the fuel system once in a while,also based on the owners manuel they highly dont recommend using any oil additives,basically thats my own pesonal view. Z
They also don't recommend using lowering springs, meth injection, exhaust, upgraded turbos, Cai, or tunes. I'd say the owners manual is more of a book of suggestions.
You are absolutly correct to point that out,but some of us like to read the manuel and use only a API certified sn/gl-5 oil made for our cars. Z
I know. Just giving ya s***.
I have archoil in 5 vehicles currently with great results. Saved the 6.0 injectors already.
I'm about to throw the oil additive in my car now. Been using the fuel stuff for about 1500 miles now.
Sent from my iPhone using Tapatalk
The stuff works. Did a buzz test on the 6.0 before and 500 miles after of running the fuel and oil additive. The injectors are back to new flow rates.
I'm not sure how/if this will affect our fuel system. But when I added archoil 6200 to exactly 13 gallons of 93 my LOR went from a solid -1 to -0.6 and stayed there until I filled up again.
I'm going to put some of the oil additive in my ptu in about a week.
Quote from: glock-coma on June 04, 2015, 03:40:13 PM
I'm not sure how/if this will affect our fuel system. But when I added archoil 6200 to exactly 13 gallons of 93 my LOR went from a solid -1 to -0.6 and stayed there until I filled up again.
Hmmm....that went the wrong way.
I wonder what's up with that.
Stock block SHO built by Black Market, tuned by Torrie, and with Mikes fuel system upgrade hits 588 awhp on stock block....that's pretty cool stuff.
Rich
My count has at least 6 SHO'S ready for 11's this month!!!
Rich
Quote from: glock-coma on June 04, 2015, 03:40:13 PM
I'm not sure how/if this will affect our fuel system. But when I added archoil 6200 to exactly 13 gallons of 93 my LOR went from a solid -1 to -0.6 and stayed there until I filled up again.
I am still at -1 with ar6200 in the fuel. Did you do a double dose?
No double dose, 5ml exactly. I used a dropper syringe to measure.
Quote from: glock-coma on June 06, 2015, 01:36:56 PM
No double dose, 5ml exactly. I used a dropper syringe to measure.
Wierd. I'm still at -1 with it in my fuel, I actually put a tad more in. Possible that the gas station didn't mix the fuel correctly?
Sent from my iPhone using Tapatalk
I saw this recall on the new 15 Ford Edge,one of my favorite suv's,there is issues with the 22in wheels . Z
Ford Edge Investigated After 22-Inch Alloy Wheel Breaks
Ford Edge owner said tire separated from broken wheel without warning, sending the Edge into a field
By David A. Wood, CarComplaints.com • Posted in Investigations
Ford Edge Investigated After 22-Inch Alloy Wheel Breaks
May 26, 2015 — The National Highway Traffic Safety Administration (NHTSA) has opened an investigation into possible problems with the 22-inch allow wheel rims on about 20,000 model year 2014 Ford Edge crossover SUVs. It took only one complaint to the safety agency, filed in November 2014, to get the attention of NHTSA.
The information is limited, although the Ford Edge owner who complained described a scary scene.
The owner was driving in Maryland when they thought the car dropped down onto the road. The driver heard a scraping sound before the SUV went off the road and into a field. The tire was off the 22-inch alloy wheel and the wheel was on the grass of the field.
The complainant said the core of the alloy wheel had totally sheared off from the exterior of the wheel. The driver said no damage to the tire was observed and there was no warning before the incident. The Edge owner said it looked as if someone had used a saw and separated the wheel, although a Ford dealer said a simple dent in the wheel caused the separation.
At the time of the wheel failure, the Ford Edge had clocked about 8,500 miles.
NHTSA is calling this a "preliminary evaluation" to determine if the 22-inch alloy wheels are defective and if 20,000 model year 2014 Ford Edge crossover SUVs should be recalled.
CarComplaints.com will update our website when the results of the investigation are available.
There's always been something or the other with those darn things. First it was that tire pressure was not able to be maintained ('11+), now this (way worse). Maybe it's just plain jinxed and that's why Ford went with the 21" option in 2015?
Larger oil filter for extra quart of oil?
Plenty of room for an extended one.
Rich
Might help, especially at the track.
BITOG thread on filter dimensions:
http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=showflat&Number=1814632 (http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=showflat&Number=1814632)
What would possess a person to lean up against someone else's car? Today I went to the dealer to pick up the gaskets that I had ordered for my new downpipe's but I'm going to install next week. I come out of the parts department only to find this guy leaning up against my car having a casual conversation with the sales rep. Needless to say the conversation I had next wasn't pleasant. But seriously why on gods green earth would someone lean up against someone else's car?
Sent from my iPhone using Tapatalk
Some people have zero respect for others peoples property....
It's just a car LOL AND it's not that guy's car so it's fair game :)
Quote from: SHOdded on June 11, 2015, 03:13:27 PM
It's just a car LOL AND it's not that guy's car so it's fair game :)
Lol if that's the case then his face should be fair game for my fist. After all it's not my face ;)
Sent from my iPhone using Tapatalk
Overall there are two kinds of people,one is a dumb *** that never owned anything nice and doesnt know any better,the second is the worst kind of them all (JEALOUSY) . Z
Quote from: ShoBoat on June 11, 2015, 03:15:01 PM
Quote from: SHOdded on June 11, 2015, 03:13:27 PM
It's just a car LOL AND it's not that guy's car so it's fair game :)
Lol if that's the case then his face should be fair game for my fist. After all it's not my face ;)
Sent from my iPhone using Tapatalk
Well said....Sounds like something I would say lol....Glad to see some animosity here....I thought I was the only ***hole lol
Anyone here have a trunk liner/mat in their SHO? I've found a few but not many reviews on them. I'd like one that would contain water/sand and not just let it run down the sides.
Quote from: wasinger3000 on June 15, 2015, 03:11:59 PM
Anyone here have a trunk liner/mat in their SHO? I've found a few but not many reviews on them. I'd like one that would contain water/sand and not just let it run down the sides.
I have a weathertech.....it would contain water and sand. The only thing is that the emblems always seem to peel off which I find unacceptable for how much they cost.
I have the husky liner and the only good thing it covers basically the whole trunk area,but with the water and sand you will need a PP with a compressor to inflate that pool in the trunk. LOL .Z
Quote from: ZSHO on June 15, 2015, 05:08:53 PM
I have the husky liner and the only good thing it covers basically the whole trunk area,but with the water and sand you will need a PP with a compressor to inflate that pool in the trunk. LOL .Z
Lol there is plenty of room for such activities.
Next question, anyone here see or use a roof rack on our cars? Do any standard ones fit the rail?
Quote from: wasinger3000 on June 15, 2015, 09:15:48 PM
Next question, anyone here see or use a roof rack on our cars? Do any standard ones fit the rail?
Check out this very cool site that has unlimited aftermarket parts,hope this helps any,BTW have a great and safe trip.enjoy. Z http://www.carid.com/2013-ford-taurus-roof-racks/yakima-prorack-roof-rack-bars-14731784.html (http://www.carid.com/2013-ford-taurus-roof-racks/yakima-prorack-roof-rack-bars-14731784.html)
Quote from: ZSHO on June 15, 2015, 09:38:17 PM
Quote from: wasinger3000 on June 15, 2015, 09:15:48 PM
Next question, anyone here see or use a roof rack on our cars? Do any standard ones fit the rail?
Check out this very cool site that has unlimited aftermarket parts,hope this helps any,BTW have a great and safe trip.enjoy. Z http://www.carid.com/2013-ford-taurus-roof-racks/yakima-prorack-roof-rack-bars-14731784.html (http://www.carid.com/2013-ford-taurus-roof-racks/yakima-prorack-roof-rack-bars-14731784.html)
Great find, Thanks!
I'm still trying to decide if I can or should put a 10ft kayak on the roof of my car.
Quote from: wasinger3000 on June 15, 2015, 10:05:12 PM
I'm still trying to decide if I can or should put a 10ft kayak on the roof of my car.
Kinda like a mohawk for the SHO. Might work ...
That awkward moment when you realize the company kicked from this site starts a Facebook page named exactly after this place...
Yes, S-S-I has started a page called ecoboost performance...just a warning for those looking around on Facebook.
Rich
Ha! LOL
And, in the last 24 hours another Facebook page has started...
F150 ecoboost performance
That ecoboost performance name sure is popular...
Rich
ford sure hit a home run w/ecoboost, just too bad the lateral 3.5 seems history, friend just bought '16 explorer sport w/3.5 econ & it's longitudinal, hitting the explorer market hard. my friend will have his in a month. atleast that's what he was told.
Anyone know anything about level kits, add-a-leaf, etc on F-250s? I can't get much help on Ford-Trucks.com.
Any good F-250 forums you can recommend?
Need to get my '11 F-250 a little lift and new shocks. Also need to fix the sag when towing.
Quote from: PokerMunkee on June 17, 2015, 05:11:48 PM
Anyone know anything about level kits, add-a-leaf, etc on F-250s? I can't get much help on Ford-Trucks.com.
Any good F-250 forums you can recommend?
Need to get my '11 F-250 a little lift and new shocks. Also need to fix the sag when towing.
I bet you could ask that on the Facebook page "ecoboosted" and get a plethora of answers in a short time.
Rich
Quote from: SHOnUup on June 17, 2015, 09:56:25 AM
And, in the last 24 hours another Facebook page has started...
F150 ecoboost performance
That ecoboost performance name sure is popular...
Rich
F150 Ecoboost Performance isn't ***. It's a member from F150Ecoboost.net.
Wilson
Quote from: Wilson on June 17, 2015, 07:07:35 PM
Quote from: SHOnUup on June 17, 2015, 09:56:25 AM
And, in the last 24 hours another Facebook page has started...
F150 ecoboost performance
That ecoboost performance name sure is popular...
Rich
F150 Ecoboost Performance isn't ***. It's a member from F150Ecoboost.net.
Wilson
Chris seems to be an ok guy...it's been less than 24 hours and has 125 members already.
The one stated first is the one that puzzles me...knowingly choosing that name?
Rich
Thats quite a few members in less than 24hrs,probably very easy to join and gain access to without any kind of security measures or protocols,makes you wonder how long its going to last. Z
Quote from: ZSHO on June 17, 2015, 07:51:00 PM
Thats quite a few members in less than 24hrs,probably very easy to join and gain access to without any kind of security measures or protocols,makes you wonder how long its going to last. Z
It is a closed group, meaning you must ask for access. It's another attempt at weeding out the ignorant ones. Some pages just don't moderate like they should.
Rich
What got me to post about this is...the other day someone posted how ecoboost performance has turned into S-S-I nation...I was quite surprised to hear that
Rich
Quote from: SHOnUup on June 17, 2015, 07:58:34 PM
What got me to post about this is...the other day someone posted how ecoboost performance has turned into S-S-I nation...I was quite surprised to hear that
Rich
WOW,those are some harsh words to say the least,honestly dont have time or interest in social media,facebook.
Dang... there's a lot of Tauruses in the Cleveland area!
I've been in Stongsville for the week on business and have seen at least 30 10-15 Tauruses, 4 SHOs. I don't think i have seen 4 SHOs in PA since i bought the car. :-(
Saw a Gem green SHO tonight in the Fridays parking lot, they went to the ribfest on the corner, we were already in the restaurant when they got out of the car.
There was even had a Ford commercial on TV that showed a Taurus!
In Pa I am lucky if i see one every two days on a 150 mile commute.
I guess i am in the wrong part of the country, they don't appreciate the Taurus as much, or just don't know about it. Can't tell you how many times I get "what is that, it looks nice".
Quote from: Leadfoot on June 20, 2015, 07:05:48 PM
Dang... there's a lot of Tauruses in the Cleveland area!
I've been in Stongsville for the week on business and have seen at least 30 10-15 Tauruses, 4 SHOs. I don't think i have seen 4 SHOs in PA since i bought the car. :-(
Saw a Gem green SHO tonight in the Fridays parking lot, they went to the ribfest on the corner, we were already in the restaurant when they got out of the car.
There was even had a Ford commercial on TV that showed a Taurus!
In Pa I am lucky if i see one every two days on a 150 mile commute.
I guess i am in the wrong part of the country, they don't appreciate the Taurus as much, or just don't know about it. Can't tell you how many times I get "what is that, it looks nice".
I was probably one of the ones you saw. I was in strongsville near the mall a few times this week. Hope you enjoy your stay.
At least the sun came out for a little while this weekend.
Could be, although I haven't seen a red SHO.
Staying at the Holiday Inn by 71 and working at CCL on Foltz Prkwy through Tuesday.
At least 2 Tauruses in the parking lot every day.
Found the difference between 90%m 10%w and 100%m last night lol.
Quote from: wasinger3000 on June 22, 2015, 10:16:32 AM
Found the difference between 90%m 10%w and 100%m last night lol.
Do tell ...
Quote from: SHOdded on June 22, 2015, 10:40:48 AM
Quote from: wasinger3000 on June 22, 2015, 10:16:32 AM
Found the difference between 90%m 10%w and 100%m last night lol.
Do tell ...
Well given this is on a 100%m in progress tune. I forgot I had one jug left of 90/10 and put that in the car. Well I found 7+ KR at WOT. :-[
Nothing broke, lol.
Yeehaw!!! A little KR reminds you to stay on track ;)
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Ha...bacon strip, that's funny
Rich
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Quote from: FoMoCoSHO on June 22, 2015, 05:59:08 PM
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Mine goes all the way to -8 to +8.
Quote from: wasinger3000 on June 22, 2015, 06:08:01 PM
Quote from: FoMoCoSHO on June 22, 2015, 05:59:08 PM
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Mine goes all the way to -8 to +8.
Well WTH?
I wonder what the difference is?
Anybody else see that range on the KR gauge?
Quote from: FoMoCoSHO on June 22, 2015, 06:11:02 PM
Quote from: wasinger3000 on June 22, 2015, 06:08:01 PM
Quote from: FoMoCoSHO on June 22, 2015, 05:59:08 PM
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Mine goes all the way to -8 to +8.
Well WTH?
I wonder what the difference is?
Anybody else see that range on the KR gauge?
I only see -4 to +7
Quote from: FoMoCoSHO on June 22, 2015, 06:11:02 PM
Quote from: wasinger3000 on June 22, 2015, 06:08:01 PM
Quote from: FoMoCoSHO on June 22, 2015, 05:59:08 PM
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Mine goes all the way to -8 to +8.
Well WTH?
I wonder what the difference is?
Anybody else see that range on the KR gauge?
Could it be the formula I've used for my knock gauge?
Here is when I had -5kr
(http://images.tapatalk-cdn.com/15/06/22/9d8a7b8d120110d5544b317ea987a83d.jpg)
Quote from: wasinger3000 on June 22, 2015, 06:20:27 PM
Quote from: FoMoCoSHO on June 22, 2015, 06:11:02 PM
Quote from: wasinger3000 on June 22, 2015, 06:08:01 PM
Quote from: FoMoCoSHO on June 22, 2015, 05:59:08 PM
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Mine goes all the way to -8 to +8.
Well WTH?
I wonder what the difference is?
Anybody else see that range on the KR gauge?
Could it be the formula I've used for my knock gauge?
Here is when I had -5kr
(http://images.tapatalk-cdn.com/15/06/22/9d8a7b8d120110d5544b317ea987a83d.jpg)
Do you have a screen shot of the pid from the manage extra pid section of torque?
2010 RCM non PP
K&N panel filter with aux hose
RX OCC with CSS
sp534 @ 30
unleashed tune 12.90@106
Quote from: glock-coma on June 22, 2015, 06:34:42 PM
Quote from: wasinger3000 on June 22, 2015, 06:20:27 PM
Quote from: FoMoCoSHO on June 22, 2015, 06:11:02 PM
Quote from: wasinger3000 on June 22, 2015, 06:08:01 PM
Quote from: FoMoCoSHO on June 22, 2015, 05:59:08 PM
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Mine goes all the way to -8 to +8.
Well WTH?
I wonder what the difference is?
Anybody else see that range on the KR gauge?
Could it be the formula I've used for my knock gauge?
Here is when I had -5kr
(http://images.tapatalk-cdn.com/15/06/22/9d8a7b8d120110d5544b317ea987a83d.jpg)
Do you have a screen shot of the pid from the manage extra pid section of torque?
2010 RCM non PP
K&N panel filter with aux hose
RX OCC with CSS
sp534 @ 30
unleashed tune 12.90@106
Even though the scale is set to -8 +8 I have still seen it reach these points.
(http://images.tapatalk-cdn.com/15/06/22/f6ac2602685d1714b16b624f5650a2db.jpg)
Quote from: wasinger3000 on June 22, 2015, 06:51:09 PM
Quote from: glock-coma on June 22, 2015, 06:34:42 PM
Quote from: wasinger3000 on June 22, 2015, 06:20:27 PM
Quote from: FoMoCoSHO on June 22, 2015, 06:11:02 PM
Quote from: wasinger3000 on June 22, 2015, 06:08:01 PM
Quote from: FoMoCoSHO on June 22, 2015, 05:59:08 PM
Quote from: wasinger3000 on June 22, 2015, 05:54:53 PM
Quote from: FoMoCoSHO on June 22, 2015, 04:09:27 PM
Quote from: wasinger3000 on June 22, 2015, 02:35:31 PM
Quote from: SHOdded on June 22, 2015, 11:11:58 AM
Yeehaw!!! A little KR reminds you to stay on track ;)
Quote from: glock-coma on June 22, 2015, 11:51:56 AM
+7 KR at WOT would have left a bacon strip in my shorts for sure.
Hah, yeah it was around 103° out with boost temps in the 120's. Defently an oh s*** moment.
Another example of how well these engines can protect themselves.
Around 0 degrees and E-45 ish is another example, LOL....
Running on the edge....all in the name of science of course.
Are you still running corn with the meth?
No corn for me. It's a 2 hr drive to restock my jugs and I just can't find the time to make the trip right now.
Hard to justify considering how quick I burn through it.
I am able to pull -6kr under heavy load before meth injection comes on so I'd say my fuel is potent enough for now. I thank ar9200 for my knock resistance.
Weird....my 13 only had a negative range of 5, and the 15 is -4
Mine goes all the way to -8 to +8.
Well WTH?
I wonder what the difference is?
Anybody else see that range on the KR gauge?
Could it be the formula I've used for my knock gauge?
Here is when I had -5kr
(http://images.tapatalk-cdn.com/15/06/22/9d8a7b8d120110d5544b317ea987a83d.jpg)
Do you have a screen shot of the pid from the manage extra pid section of torque?
2010 RCM non PP
K&N panel filter with aux hose
RX OCC with CSS
sp534 @ 30
unleashed tune 12.90@106
Even though the scale is set to -8 +8 I have still seen it reach these points.
(http://images.tapatalk-cdn.com/15/06/22/f6ac2602685d1714b16b624f5650a2db.jpg)
Just checked mine. Max is set at 100,
min is set at 0. But I still see -4....
I was driving on the highway today on a grooved road under construction when a small rock just came under a big 18 wheeler and hit the bottom portion on my windshield about a inch away from the cowl cover,another thing to worry about. Z
Damn that sucks z.
Make sure it's a oem replacement windshield when it's replaced with sound screen laminate.
The place I went to tried to pull a fast one and gave me an oee (original equipment equivalent)
Made in China. It was like looking through a coke bottle.
That's a nasty crack, Z, totally empathize! Was that 18 wheeler equipped with mud flaps?
ZSHO, I'll see your crack and raise you.
(http://images.tapatalk-cdn.com/15/06/28/2b1e312ab31befe0461a7ade18ee62a0.jpg)
Wife took out a large bird on the way to Savannah a few weeks ago.
So I did a little testing with the car today. Had it loaded up with around 450 lbs of gear.
Found out it won't build more than 5-6 psi on a wot downshift. No matter what gear it just won't do it.
1st and 2nd gear pull hard but 3rd and up are sluggish. Not sure why it would pull boost when there is no knock and meth is spraying.
Also my CM voltage is hovering around 13.7 with ac and cooled seats on. Seems lower than I'd like.
Thanks for all your inputs,actually SHOdded nailed in the head,those darn mud flaps blew that rock across the highway,stuff happens and just a little up set and apologize if i put it in the wrong section. Z
Quote from: ZSHO on June 28, 2015, 03:48:29 PM
I was driving on the highway today on a grooved road under construction when a small rock just came under a big 18 wheeler and hit the bottom portion on my windshield about a inch away from the cowl cover,another thing to worry about. Z
That's a complete random act of cruelty right there Z. Maybe a visit to the local rock crusher could make ya feel a bit better...lol
Rich
Quote from: slurppie on June 28, 2015, 08:56:10 PM
ZSHO, I'll see your crack and raise you.
(http://images.tapatalk-cdn.com/15/06/28/2b1e312ab31befe0461a7ade18ee62a0.jpg)
Wife took out a large bird on the way to Savannah a few weeks ago.
Wow, was it a teridactal? That's one huge bird (torpedo with wings). It had to threaten the undergarments with a "bacon strip"(<---stole that).
Rich
Quote from: slurppie on June 28, 2015, 08:56:10 PM
ZSHO, I'll see your crack and raise you.
Wife took out a large bird on the way to Savannah a few weeks ago.
Aren't they supposed to be targeting airplanes? Are they bringing the war to the ground?
Quote from: ZSHO on June 28, 2015, 09:24:09 PM
Thanks for all your inputs,actually SHOdded nailed in the head,those darn mud flaps blew that rock across the highway...
Need a tank suit to protect our vehicles nowadays :(
dang it! I messed up when I bought the car and didn't notice a crack in the outer driver side tail lamp assembly. it allows moisture in and now it's all full of condensation. a new assembly is $700! looking on LKQ I can get one for $400... holy crapola!
I hope you are still under the 3/36 warrany?
will they cover a cracked lens? it probably from some sort of impact
Quote from: SHOnUup on June 28, 2015, 10:24:38 PM
Quote from: slurppie on June 28, 2015, 08:56:10 PM
ZSHO, I'll see your crack and raise you.
(http://images.tapatalk-cdn.com/15/06/28/2b1e312ab31befe0461a7ade18ee62a0.jpg)
Wife took out a large bird on the way to Savannah a few weeks ago.
Wow, was it a teridactal? That's one huge bird (torpedo with wings). It had to threaten the undergarments with a "bacon strip"(<---stole that).
Rich
The wife said it was an eagle flying in the median which banked left right as she got up on it. It hit with enough force that occupants in the back seat were peppered with glass.
I hope no one was hurt during that incident slurppie,found out that only the middle section of the windshield is coated with sound screen and the edges are not,and usually a windshield is covered under warranty up to one year or 12k,found a descent discussion about the sound screen winsdshields on the f-150 thread. Z http://www.f150forum.com/f38/soundscreen-windshields-more-prone-cracking-305577/ (http://www.f150forum.com/f38/soundscreen-windshields-more-prone-cracking-305577/)
Interesting read on the Soundscreen windshield. I'm looking into having a product applied called "ClearPlex". The cost runs almost as much as a new windshield but supposedly comes with a warranty covering up to $2k.
Just emailed TFL (good youtube series) to have my SHO taped in their run what you brung!
Example:
https://www.youtube.com/watch?v=YxXH8zqW8AM (https://www.youtube.com/watch?v=YxXH8zqW8AM)
Anyone in Colorado with a meth SHO? That would make for a good video!
Clearplex's windshield product page is DOA ...
Quote from: SHOdded on June 29, 2015, 08:10:16 PM
Clearplex's windshield product page is DOA ...
Here's the local shop that offers it.
http://www.allprowindowtinting.com
After speaking with the shop owner, I was under the impression it was some new product.
I believe this is the stuff, http://www.clearplexusa.com/36-x-25-clearplex-roll-4-mil-75-square-feet/
Hell for that price I can buy a roll and apply it myself and save $200.
Quote from: wasinger3000 on June 28, 2015, 09:19:48 PM
So I did a little testing with the car today. Had it loaded up with around 450 lbs of gear.
Found out it won't build more than 5-6 psi on a wot downshift. No matter what gear it just won't do it.
1st and 2nd gear pull hard but 3rd and up are sluggish. Not sure why it would pull boost when there is no knock and meth is spraying.
Also my CM voltage is hovering around 13.7 with ac and cooled seats on. Seems lower than I'd like.
my voltage hovers around 13.7 with all that on along with 1,200 watts rms hammering the trunk lol. Stays around the same even with all of it off, I guess the alternator doesn't put out max amps unless it needs to, just puts out enough to keep the battery charged with the current load.
Sent from my iPhone using Tapatalk
Quote from: jtoddk98 on June 29, 2015, 10:07:01 PM
Quote from: wasinger3000 on June 28, 2015, 09:19:48 PM
So I did a little testing with the car today. Had it loaded up with around 450 lbs of gear.
Found out it won't build more than 5-6 psi on a wot downshift. No matter what gear it just won't do it.
1st and 2nd gear pull hard but 3rd and up are sluggish. Not sure why it would pull boost when there is no knock and meth is spraying.
Also my CM voltage is hovering around 13.7 with ac and cooled seats on. Seems lower than I'd like.
my voltage hovers around 13.7 with all that on along with 1,200 watts rms hammering the trunk lol. Stays around the same even with all of it off, I guess the alternator doesn't put out max amps unless it needs to, just puts out enough to keep the battery charged with the current load.
Sent from my iPhone using Tapatalk
I guess with you not using the car as much,maybe a new battery is in order. Z
Who needs street lights....
Power went out the other night figure I'd light up the street as I needed to walk the dog lol. BTW that's just the parking lights (headlights are off)
Sent from my iPhone using Tapatalk
Quote from: ShoBoat on June 30, 2015, 11:16:59 AM
Who needs street lights....
Power went out the other night figure I'd light up the street as I needed to walk the dog lol. BTW that's just the parking lights (headlights are off)
Yeah baby!!!
Quote from: Airbornemaikai on May 30, 2015, 11:32:22 PM
I'm a dad for the 3rd time. This is my son. Looks like Car parts will be on hold for a while as he was my birthday present.
He is just too precious! Congratulations! 3 is nice number. Oh, and it takes a man to make one.
But it also takes a man to knock the stem off of an apple!
Just celebrated my first born a few weeks ago...
(http://img.photobucket.com/albums/v181/HiFiveRecognized/IMG950666_zpsttkhqcdb.jpg) (http://smg.photobucket.com/user/HiFiveRecognized/media/IMG950666_zpsttkhqcdb.jpg.html)
*EDIT
Sorry, gentlemen. I just realized I'm a little behind in this thread. XD
Quote from: IHeartGroceries on June 30, 2015, 07:25:41 PM
Quote from: Airbornemaikai on May 30, 2015, 11:32:22 PM
I'm a dad for the 3rd time. This is my son. Looks like Car parts will be on hold for a while as he was my birthday present.
He is just too precious! Congratulations! 3 is nice number. Oh, and it takes a man to make one.
But it also takes a man to knock the stem off of an apple!
Just celebrated my first born a few weeks ago...
(http://img.photobucket.com/albums/v181/HiFiveRecognized/IMG950666_zpsttkhqcdb.jpg) (http://smg.photobucket.com/user/HiFiveRecognized/media/IMG950666_zpsttkhqcdb.jpg.html)
*EDIT
Sorry, gentlemen. I just realized I'm a little behind in this thread. XD
Congrats!!!
Cherish these years, before you know it...they think they know it better than you.
Rich
Quote from: IHeartGroceries on June 30, 2015, 07:25:41 PM
Just celebrated my first born a few weeks ago...
Congrats, man! That is one great pic and one great kid!!!
Quote from: SHOnUup on June 30, 2015, 07:33:03 PM
Quote from: IHeartGroceries on June 30, 2015, 07:25:41 PM
Quote from: Airbornemaikai on May 30, 2015, 11:32:22 PM
I'm a dad for the 3rd time. This is my son. Looks like Car parts will be on hold for a while as he was my birthday present.
He is just too precious! Congratulations! 3 is nice number. Oh, and it takes a man to make one.
But it also takes a man to knock the stem off of an apple!
Just celebrated my first born a few weeks ago...
(http://img.photobucket.com/albums/v181/HiFiveRecognized/IMG950666_zpsttkhqcdb.jpg) (http://smg.photobucket.com/user/HiFiveRecognized/media/IMG950666_zpsttkhqcdb.jpg.html)
*EDIT
Sorry, gentlemen. I just realized I'm a little behind in this thread. XD
Congrats!!!
Cherish these years, before you know it...they think they know it better than you.
Rich
Congrats on a happy and healthy lives full of joy which you should cherish every moment you can together,BTW have two children which owe me 1.4 million LOL. Z
Quote from: IHeartGroceries on June 30, 2015, 07:25:41 PM
Quote from: Airbornemaikai on May 30, 2015, 11:32:22 PM
I'm a dad for the 3rd time. This is my son. Looks like Car parts will be on hold for a while as he was my birthday present.
He is just too precious! Congratulations! 3 is nice number. Oh, and it takes a man to make one.
But it also takes a man to knock the stem off of an apple!
Just celebrated my first born a few weeks ago...
(http://img.photobucket.com/albums/v181/HiFiveRecognized/IMG950666_zpsttkhqcdb.jpg) (http://smg.photobucket.com/user/HiFiveRecognized/media/IMG950666_zpsttkhqcdb.jpg.html)
*EDIT
Sorry, gentlemen. I just realized I'm a little behind in this thread. XD
Thank you very much, and a huge congrats to you as well. Welcome to fatherhood!
I spoke with my service advisor regarding the cracked windshield and he clearly stated if it was a stress crack maybe he would of made an exception,but due a rock hitting the windshield,he told me to call up the insurance co and demand a oem soundscreen wiindshield because of the reduction of the noise level factor which some aftermarket glass co do not supply,another note is that the car being less than two years old they should consider it,after a long conversation with the insurance co they finally approved the oem windshield which will be done by safelite next week for free,BTW forgot to mention a special tool is needed to remove and install the rain sensor component along with the rear view mirror,and of course an experienced installer is a must,sorry for the long post causr had some bad experiences in the past with oes co and installers and having air leaks because the winshield was not sealed up properly which then can cause water to enter the cabin through the firewall causing damage to electrical components and modules,then eventually you will see a puddle of water in your passenger floor mat. Z
I'm wishing everyone and there family's a happy and safe 4th of July weekend,thanks. Z :usa: :usa: :usa: :usa:
Happy & safe 4th to all my fellow members ! Hope the biggest dangers you face are permagrins from too much fun and stomachs filled to bursting from too much good food!
Salute and thank you to the folks who protect our freedom from without and within.
Z, great thoughts on the windshield replacement. I sure would hate a hack job on something like that!
Really frustrated with this truck... why is it always so hard to get to a cabin filter.
(http://images.tapatalk-cdn.com/15/07/05/ae410d91f9383291ff0e306b3445322b.jpg)
Seems like there is an update for sync on the 2010-2012 cars. Includes Bluetooth stability and the ability to see what is playing on the screen when streaming Bluetooth audio.
Sent from my iPhone using Tapatalk
Quote from: wasinger3000 on July 04, 2015, 09:13:09 PMReally frustrated with this truck... why is it always so hard to get to a cabin filter.
Quite difficult on a Honda Pilot as well, BUT, mostly the first time. There are plates they put in to help the automated assembly of the dash, and these need to be permanently removed at the first service. Fortunately, it is SO much easier on the Edge!
Quote from: jtoddk98 on July 05, 2015, 03:46:46 AM
Seems like there is an update for sync on the 2010-2012 cars. Includes Bluetooth stability and the ability to see what is playing on the screen when streaming Bluetooth audio.
Free? Reliable?
Quote from: wasinger3000 on July 04, 2015, 09:13:09 PM
Really frustrated with this truck... why is it always so hard to get to a cabin filter.
(http://images.tapatalk-cdn.com/15/07/05/ae410d91f9383291ff0e306b3445322b.jpg)
I would make an appt at the dealer and purchase the cabin filter while your there,then they should install it for free and ask them are there any tricks to install this without breaking anything. Z
I knew it!
Sent from my iPhone using Tapatalk
Kind of a fail at that oldie..... Subbies are AWD and have rally heritage.
Little fun with Coke
Nice!
Painted the rims today with duplicolor high performance wheel black with a gloss clear coat, to be honest, I'm not impressed. Looks like plasti dip with glossifier on it. I used rustoleum 2x gloss black for the rest of the chrome trim, turned out awesome, really nice gloss. I wonder if I can sand my rims back down and use that to paint them. Stuff sticks to anything
Sent from my iPhone using Tapatalk
Walnut blasting media would probably be an easier method than sanding. Any pics by chance?
Interesting read. http://www.oilem.com/fuel-catalysts-archoil-ar6200-2/
In another article, he says that water/methanol injection is of "limited value when it comes to reducing carbonaceous buildup in the inlet port and inlet valve surfaces", referring to lubricating oil-related deposits as opposed to fuel deposits.
Quote from: glock-coma on July 06, 2015, 08:54:07 PM
Walnut blasting media would probably be an easier method than sanding. Any pics by chance?
yea. I'll throw some up in the pics section in the morning. Just pit them on and took the car off the stands tonight. They actually look decent in the car, will look even better when they completely dry and I put a nice coat of wax on.
Sent from my iPhone using Tapatalk
Damn it, can't believe I'm typing this. I'm contemplating taking the SHO to CarMax tomorrow to see what they will give me for it. If they give me $27K or higher, I will probably sell it. Looking at sheedding debt and gtting $7K of equity in the SHO (owe $20K on it). They only have one 2013 SHO for sale nation wide, 20k miles for $31K. Mine has 23k miles. Could be close.
The F-250 is paid for and I really enjoy driving it. Don't have to worry about people dinging it or hitting stuff. Leaves me with only the wife's truck and a camper to pay off and more cash in the savings account. Definitely will be paying more $$ for gas, as the truck only gets 14mpg vs the SHO's 23 on my commute.
So, kind of hoping CarMax low balls me. lol
After dwelling on the thought, I'm keeping the SHO for at least another year. Still enjoy getting it in everyday. When that fades, I'll consider trading it. Crisis avoided.
A collective sigh of relief was heard far and wide ... :D
yesterday I was reading about how our soundscreen windshields are susceptible to cracks from rocks. well, I get in my car to go to work tonight and there's a big flippin crack starting at the base of the window going right up the middle. i must have gotten it on my trip to memphis and then it grew because of our below normal temps yesterday :blowup:
Argh! Another one! Sorry to hear that :( Better get a replacement lined up soon if you want OEM available before the crack becomes a chasm ...
Quote from: 92BlackGT on July 09, 2015, 03:46:07 AM
yesterday I was reading about how our soundscreen windshields are susceptible to cracks from rocks. well, I get in my car to go to work tonight and there's a big flippin crack starting at the base of the window going right up the middle. i must have gotten it on my trip to memphis and then it grew because of our below normal temps yesterday :blowup:
I replaced my windshield twice and the car hasn't 20K miles yet...
Wonder if Ford is looking into this issue at all? Windshields should last a LOOONG time!
I spoke to a buddy at Ford and he is trying to track down an original windshield for me cause supposedly there on back order with no eta,wonder if the 10-12 SHO have the soundscreen winshield. Z
well, USAA said it will be 2 weeks before they can get an OEM windshield. I better not get hassled about the crack when going on base... i already have to worry about my driver side brake light not working (new assembly should be here tomorrow). security forces are bored and look for anything to pull you over
Quote from: ZSHO on July 09, 2015, 09:00:29 AM
I spoke to a buddy at Ford and he is trying to track down an original windshield for me cause supposedly there on back order with no eta,wonder if the 10-12 SHO have the soundscreen winshield. Z
my 2010 does have sound screen glass
Quote from: 92BlackGT on July 09, 2015, 10:05:40 AM
well, USAA said it will be 2 weeks before they can get an OEM windshield. I better not get hassled about the crack when going on base... i already have to worry about my driver side brake light not working (new assembly should be here tomorrow). security forces are bored and look for anything to pull you over
Interesting... While I don't allow a wash except by me or my detail guy, I had one of those outfits that hang around car washes replace mine twice with oem soundscreen windshield I never had to wait longer than 48 hrs.
Its official,the Ford oem windshields are on backorder,no eta no nothing,just alot of B.S though and quite frankly getting tired of it all. Z
Quote from: ZSHO on July 09, 2015, 05:02:56 PM
Its official,the Ford oem windshields are on backorder,no eta no nothing,just alot of B.S though and quite frankly getting tired of it all. Z
Thanks Z... This sux as I get a new one about once a year due to projectiles coming out from under lifted trucks and semis... I think I should get a repair started now and insist on oem so that I might get one... And as impetus for a manufacturing run!
Quote from: BiGMaC on July 09, 2015, 07:29:53 PM
Quote from: ZSHO on July 09, 2015, 05:02:56 PM
Its official,the Ford oem windshields are on backorder,no eta no nothing,just alot of B.S though and quite frankly getting tired of it all. Z
Thanks Z... This sux as I get a new one about once a year due to projectiles coming out from under lifted trucks and semis... I think I should get a repair started now and insist on oem so that I might get one... And as impetus for a manufacturing run!
I guess i have more stories than walt disney as of late petaining to the windshield,due apologize and end of story.lol Z
I'm not sure what's going on, but fragile windshields seems to be a current issue going on across many newer makes and many models. Google it!
Sent from my SM-N900V using Tapatalk
Quote from: IHeartGroceries on July 09, 2015, 09:49:32 PM
I'm not sure what's going on, but fragile windshields seems to be a current issue going on across many newer makes and many models. Google it!
Sent from my SM-N900V using Tapatalk
Im not sure if the newer makes and models have a backorder with no future eta,no dis intended. Z
Oh, I'm sure it's frustrating. I meant, it's pretty weird that it seems to be transcending the entire industry. Mazda all of a sudden (like past 3 years, with new Skyactiv vehicles) is having an issue worldwide. I'm not sure what to make of that. ASAIK, it's also a task to get OE windshields for the Mazda's too. But, I know Ford uses the sound deadening type. I'm sure that just makes availability even more limited.
Sent from my SM-N900V using Tapatalk
Quote from: IHeartGroceries on July 09, 2015, 10:06:41 PM
Oh, I'm sure it's frustrating. I meant, it's pretty weird that it seems to be transcending the entire industry. Mazda all of a sudden (like past 3 years, with new Skyactiv vehicles) is having an issue worldwide. I'm not sure what to make of that. ASAIK, it's also a task to get OE windshields for the Mazda's too. But, I know Ford uses the sound deadening type. I'm sure that just makes availability even more limited.
Sent from my SM-N900V using Tapatalk
Thanks H, guess now will be a great time to open a glass co,probably see some good profit margins. Z
Quote from: IHeartGroceries on July 09, 2015, 10:06:41 PM
Oh, I'm sure it's frustrating. I meant, it's pretty weird that it seems to be transcending the entire industry. Mazda all of a sudden (like past 3 years, with new Skyactiv vehicles) is having an issue worldwide. I'm not sure what to make of that. ASAIK, it's also a task to get OE windshields for the Mazda's too. But, I know Ford uses the sound deadening type. I'm sure that just makes availability even more limited.
Sent from my SM-N900V using Tapatalk
maybe they're going with thinner windshields to save weight for better gas mileage?
Seems the Ford Soundscreen windshields are thinner glass and lighter according to an article I found.
[http://www.ocregister.com/articles/ford-64090-lincoln-soundscreen.html (http://[http://www.ocregister.com/articles/ford-64090-lincoln-soundscreen.html)
To go along with the A pillars blowing clean off the explorers on the interstate
They are probably making windshields extra thin these days to get rid of every last ounce they can without adding to the cost of the car. And that's a cheap way to shed a little weight.
I remember the C5 ZO6s had thinner windshields than the other Vettes. One of their weight-saving measures.
Trip update. Made it to the west coast. The f150 is doing pretty good for mpg considering all the mountains I've been through. (http://images.tapatalk-cdn.com/15/07/14/f7ef069a427c2ee484743bc1721fe85b.jpg)
Quote from: wasinger3000 on July 14, 2015, 06:05:45 PM
Trip update. Made it to the west coast. The f150 is doing pretty good for mpg considering all the mountains I've been through.
Jelly :D Were you hypermiling, wasinger?
Quote from: SHOdded on July 14, 2015, 06:18:30 PM
Quote from: wasinger3000 on July 14, 2015, 06:05:45 PM
Trip update. Made it to the west coast. The f150 is doing pretty good for mpg considering all the mountains I've been through.
Jelly :D Were you hypermiling, wasinger?
I drove ever mile of that lol. Made it to cali in 3 days with stops to see stuff along the way in colorado, utah and Nevada. Only half way done with this trip.
I haven't been around much lately. How are you liking that pickup? Sure do love the new body style and redesign.
Sent from my SM-N900V using Tapatalk
There's a move to get custom made hoods for 13+ SHO on my Facebook page. Only 15 needed for it to happen.
Ecoboost Enthusiasts
Rich
Carbon fiber hoods, right, Rich? Any price range expectations? Known fabricator? Timeline?
Quote from: SHOdded on July 16, 2015, 07:58:11 PM
Carbon fiber hoods, right, Rich? Any price range expectations? Known fabricator? Timeline?
It's either gen now...15 needed
No design or build set yet as there are many styles to be discussed.
This is just starting, so more details as it takes form will be coming.
Rich
Quote from: SHOnUup on July 16, 2015, 08:05:18 PM
Quote from: SHOdded on July 16, 2015, 07:58:11 PM
Carbon fiber hoods, right, Rich? Any price range expectations? Known fabricator? Timeline?
It's either gen now...15 needed
No design or build set yet as there are many styles to be discussed.
This is just starting, so more details as it takes form will be coming.
Rich
Very exciting!
Any possibility of vents?
Quote from: FoMoCoSHO on July 16, 2015, 08:10:09 PM
Quote from: SHOnUup on July 16, 2015, 08:05:18 PM
Quote from: SHOdded on July 16, 2015, 07:58:11 PM
Carbon fiber hoods, right, Rich? Any price range expectations? Known fabricator? Timeline?
It's either gen now...15 needed
No design or build set yet as there are many styles to be discussed.
This is just starting, so more details as it takes form will be coming.
Rich
Very exciting!
Any possibility of vents?
Very possible
It's an open discussion at this point.
Rich
(http://images.tapatalk-cdn.com/15/07/16/25f986c98f159f6b6675902c35ee393c.jpg)
Rich
That's just an idea so far...
I'll start a thread tomorrow...12 hours into shining up the SHO and I still don't see the end
Rich
SHO's a big 'un :D
Quote from: SHOnUup on July 16, 2015, 08:35:35 PM
That's just an idea so far...
I'll start a thread tomorrow...12 hours into shining up the SHO and I still don't see the end
Rich
As I tell my girlfriend... "The SHO detailing is broken down into sections, if all happen in one day, I will need Beer, Time, and NO COMPLAINING ABOUT HOW LONG I TAKE!" hahaha
Quote from: peppelepugh on July 16, 2015, 10:52:00 PM
Quote from: SHOnUup on July 16, 2015, 08:35:35 PM
That's just an idea so far...
I'll start a thread tomorrow...12 hours into shining up the SHO and I still don't see the end
Rich
As I tell my girlfriend... "The SHO detailing is broken down into sections, if all happen in one day, I will need Beer, Time, and NO COMPLAINING ABOUT HOW LONG I TAKE!" hahaha
Amen, it is a behemoth.
Changed oil (dragway last night), wd40 on the tires to get off whatever all the stuff was all over the sidewalls, washed, clay barred, polished, then waxed...I'm beat, and out of beer.
Rich
I just hit 28k on the SHO,was planning to do a trans flush soon,but after looking at this video in reference to mercon lv fluid was a bit surprised about the color on the fluid,hope this helps someone out. Z https://www.youtube.com/watch?v=JUBoXyQ7UDQ (https://www.youtube.com/watch?v=JUBoXyQ7UDQ)
I've just hit 22k on my SHO. Like Z, I wondered about transmission service. Here's a little more info:
https://youtu.be/Nse_z9RmPcQ
I've got 68k on my sho! I guess I better read up on transmission services.
Just got a new Ford windshield put in because the aftermarket one that was in before was loud. Still have a buzzing sound when you go over 75
Sent from my iPhone using Tapatalk
Mine did this...its the plastic cowl piece right under the windshield on mine. Thought it was the wiper blades at first. You can try adding some double sided body tape or replace the clip fasteners with push on. Helped me anyway!
Quote from: ecoboostsho on July 20, 2015, 07:19:41 PM
Mine did this...its the plastic cowl piece right under the windshield on mine. Thought it was the wiper blades at first. You can try adding some double sided body tape or replace the clip fasteners with push on. Helped me anyway!
Ditto^^
I would like to know whats the average waiting time for an oem sounscreen windshield??tommorrow will be two weeks and counting and will probably wait until the end of the month,after that i'm goung to visit a local ford dealer around 3am. LOL Z
I have noticed that the fuel filler door does not lock when the alarm is set,can someone verify this feature,if so a locking gas cap is in order preventing any unwanted access. Z
So I just noticed my leds I had installed a while back on license plate bulb were changed out to stock bulbs when they did the recall to it at the dealership . Anyone know if that is correct protocol ? They should have at least given the leds back .
My dealer did the same thing when they replaced the LPFP lights. They gave me the LEDs back and explained it was protocol and they had to follow Ford recommended procedure...
I found this interesting since they did R&R on my PPE hotpipes when they fixed my leaking valve cover and spark plug seal...
I always check the car for correct modded parts before I drive away. My service advisor recommended it...
This is alarming... http://www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/
Been a cocern for quite some time now, since it was rumored that Windows software would be introduced into vehicles. Technology progresses, security concerns explode. Business as usual.
Quote from: wasinger3000 on July 21, 2015, 01:35:13 PM
This is alarming... http://www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/ (http://www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/)
It won't be addressed until something serious happens unfortunately. The best way you can protect your car is to not use the WiFi capabilities and BT it sounds like. Even then I am not sure if that is 100%. Hopefully they will have security up-dates for the system.
Quote from: ZSHO on July 20, 2015, 10:19:30 PM
I would like to know whats the average waiting time for an oem sounscreen windshield??tommorrow will be two weeks and counting and will probably wait until the end of the month,after that i'm goung to visit a local ford dealer around 3am. LOL Z
I only waited a week and a half through safelite.
Sent from my iPhone using Tapatalk
Quote from: wasinger3000 on July 21, 2015, 01:35:13 PM
This is alarming... http://www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/ (http://www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/)
Yes it is. I've been following them for some time (I'm in IT and work occasionally with the engineers on CANBUS at work)...It is only a matter of time if manufacturer's insist on connecting our cars to the Internet. Even the Bluetooth adapter plugged in to my dash is technically vulnerable - albeit at a limited distance. Hopefully manufacturer's will take this seriously and implement some better security protocols...
Quote from: ecoboostsho on July 21, 2015, 02:34:32 PM
Quote from: wasinger3000 on July 21, 2015, 01:35:13 PM
This is alarming... http://www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/ (http://www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/)
Yes it is. I've been following them for some time (I'm in IT and work occasionally with the engineers on CANBUS at work)...It is only a matter of time if manufacturer's insist on connecting our cars to the Internet. Even the Bluetooth adapter plugged in to my dash is technically vulnerable - albeit at a limited distance. Hopefully manufacturer's will take this seriously and implement some better security protocols...
Unfortunately it seems the automakers are always behind the curve for security.
Unfortunately new cars are being delivered with tech that's a couple of years old due to the lag between planning, building and delivering and tech moves so fast these days. It waits for no one.
http://www.ocregister.com/articles/ford-64090-lincoln-soundscreen.html (http://www.ocregister.com/articles/ford-64090-lincoln-soundscreen.html)
Ford Products to Launch with Carlite's SoundScreen Noise-Reducing Glass Technology
Nov. 25, 2008 |Updated Aug. 21, 2013 1:17 p.m.
Five new Ford Motor Company products fitted with Carlite(R)'s noise-blocking SoundScreen(TM) windshields will be unveiled at the 2008 Los Angeles Auto Show: the 2010 Ford Fusion and Fusion Hybrid, the 2010 Mercury Milan and Milan Hybrid and the 2010 Lincoln MKZ.
Carlite's SoundScreen technology is a key component of Ford's drive to make vehicle cabins quieter. SoundScreen windshields use a sheet of specially-developed acoustic vinyl sandwiched between two layers of glass. It reduces noise levels by as much as 6 dB at certain frequencies and 2 to 3 dB overall, meaning conversations are clearer and more intelligible.
SoundScreen technology also saves weight -- as much as seven pounds per vehicle -- because the glass is thinner than in conventional windshields while offering superior noise-reducing performance.
"The ability to keep wind and road noise from entering the passenger cabin while reducing weight is why every year more Ford products are being equipped with SoundScreen windshields at the factory," said John Heller, vice president of automotive glass sales for Carlite.
The first Ford products launched with SoundScreen glass were the 2007 Ford Expedition, Lincoln Navigator and Lincoln MKX. It's also standard equipment on the Mercury Mariner, Lincoln MKS, the Ford Flex, F-150 Platinum edition, Focus and Escape.
The results have been a steady improvement in customer-reported quality. In fact, complaints about wind noise in Ford products went from second-worst in the industry in 2003 to the best in 2007, beating Toyota. That's according to RDA Group of Bloomfield Hills, Mich., which conducts customer surveys for Ford.
Professional test drivers also are talking about the exceptional quietness of newer Ford, Lincoln and Mercury products. For example, Popular Mechanics magazine called the cabin of the 2010 F-150 "luxury-car quiet," while the Los Angeles Times said the 2009 Ford Flex offers "deep-piled serenity and a cottony ambience, thanks to a soundproofing program that includes extensive use of acoustic glass."
The 2010 Ford Fusion, Mercury Milan and Lincoln MKZ go on sale in early 2009.
Thinking of letting SHO go in favor of Explorer Sport or Edge Sport. Easier to get in/out, load luggage/groceries etc... Any advice/thoughts on color-Platinum tri-color white or Ruby Red metallic? Perhaps Bronze fire?
Bronzefire would be my favorite, but all 3 colors - you can't really lose :)
Blackhawk Farms...wow...time to fix the car. What a blast!!! Drove the effin wheels off it!!!!!!!!!!!!!!!
Rich
2016 Explorer Sport.... Looks great. I'd be tempted.
I'd wait for sync 3 to come in the explorer
Sent from my iPhone using Tapatalk
Anyone here own a 2014+ Jeep grand cherokee, Overland or Summit? Particularly with the 3.0 diesel?
Looking into buying a 2016.
I'm a bit upset of the lack of responses,(inputs)to simple questions that i have posted recently on this forum,simply to just get an idea for comparison studies,maybe its better than having a six page of replies,oh well. Z
Quote from: ZSHO on July 27, 2015, 10:08:42 AM
I'm a bit upset of the lack of responses,(inputs)to simple questions that i have posted recently on this forum,simply to just get an idea for comparison studies,oh well. Z
That's why you should take up that offer I put forth months back...it's still an option buddy
Rich
Quote from: SHOnUup on July 27, 2015, 10:11:05 AM
Quote from: ZSHO on July 27, 2015, 10:08:42 AM
I'm a bit upset of the lack of responses,(inputs)to simple questions that i have posted recently on this forum,simply to just get an idea for comparison studies,oh well. Z
That's why you should take up that offer I put forth months back...it's still an option buddy
Rich
Thanx Rich,guess less posting is in order,see what happens. Z
What info are you looking for, Z?
Anybody have a 2013 FSM (I assume 2010-12 is same, but JIC)? This gentleman over on SHOforum is looking for assistance replacing the ETC sensor:
http://www.shoforum.com/index.php?threads/2013-etc-sensor-replacement-12a648.130404/#post-1433123 (http://www.shoforum.com/index.php?threads/2013-etc-sensor-replacement-12a648.130404/#post-1433123)
I dont know what it is about OEM ford batteries.....every damn one of them fails on me.
And its always on my day off......
I've had to replace the battery in my 2013 Explorer Limited and again in my 2014 Explorer Sport. Finally got a DieHard Platinum P2. Weighs a lot more,but I know ill never need to replace it
So, I do 0-60 runs with a stop watch on a flat area near my work called Gillette Flats. It sits at 10,000' elevation. My SHO does it in 5.5 secs almost every time. Been testing out my stock 2011 F-250 XLT CC SB 3.73 FX4 with the 6.2L V8 this week. It consistently does it in 12.5 secs. Ordered a 5 Star tune for my truck (87 perf/tow) to help with the throttle response and when towing. I don't expect it to help the performance much.
My old 2007 Dodge Durango 5.7 3.55 4wd did it in 13 seconds with a Diablosport 87 Tune.
Just thought some would find it interesting how much faster my SHO is than my trucks at this altitude :D
Interesting time research PM...
Not too surprising though.
When 10,000 ft elevation is compared to sea level the atmospheric pressure drops around 50%. So the absolute precombustion pressure in each cylinder is lower as is the absolute amount of available oxygen. It is a testament to the ECM programming that the speeds stay as good as they do. My SHO in PHX gets 3.9-4.0.sec 0-60 ... At about 1300 ft elevation in cooler weather... I too have also noted slower acelleration when I get up in th mountains, like the flats near Sunrise at about 9500 ft. Likely the difference in the SHO is the turbos.
SHO back in the shop today for an alternator.
Car was happy after the new battery yesterday but after 30 mins of driving, noticed voltage starting to drop.
Started up this morning and within a minute of driving, voltage dropped into the 12's.
Took an immediate detour to my dealer to see my lovely Service Adviser....
Should have her back tomorrow, I grabbed a 4wd Eco Escape for the rental.
These things unfortunetly happen to the best of us FoMoCoSHO,do you think the 13-15 sho have the same alternator,best of luck and keep us updated,BTW three weeks and still waiting for a oem windshield with a national backorder with no eta. Z
Pretty sure they're the same and failure seems to be pretty rare.
Did you order your glass through the dealership or glass company?
Must be nice to sleep next to your service adviser LOL
Quote from: PokerMunkee on July 29, 2015, 10:46:27 PM
Must be nice to sleep next to your service adviser LOL
It does come in handy at times, LOL
Can you get details on the alternator they take out as well as its' replacement, FoMoCo? Would like to see who mfr'd them & where. TIA.
I actually applaud the new privacy feature that you have implemented as of late to this fine forum,i'm not sure if it was SHOdded but thank you for enacting this proposal. Z
As always, a joint effort by the EBPF team :D
I have noticed quite a few members having noise issues by thr front windshield,there is a new TSB related to that,hope this helps someone out. Z TSB #44863
NHTSA ID #10057834
Date Announced:
JULY 01 2015
Additional Info:
How to Fix
Summary: FORD: NO SERVICE ACTION IS RECOMMENDED FOR THIS CONDITION. PLEASE USE AT YOUR DISCRETION. VARIOUS 2010-2015 VEHICLES MAY EXPERIENCE A TURBULENCE NOISE, SIMILAR TO AN HELICOPTER NOISE, AT HIGHWAY SPEEDS WHEN THE REAR DOOR WINDOW(S) OR SUNROO
More Information »
In the F150 this motor makes 365hp and 420ft-lbs. With a tune you can push roughly 450hp and 530ft-lbs.
In the Transit it makes 310hp and 400ft-lbs. How different is this motor from the F150? Is it just running less boost?
And of course the most important quesiton, could you use the same sorta tuner for the F150 on a Ford Transit Ecoboost? Just imagine a 450hp 530ft-lbs Van....
I'm just asking out of curiosity. Not because I know someone who has one as their company vehicle and complains about having problems towing.
My F-250 gets new shocks, add-a-leaf, and 18x9 Pro Comp black wheels 295/70/18 Grapplers installed on Friday. Also ordered fender flares. Can't wait! I'll post pics when she's all done.
How she currently sits:
(http://i1249.photobucket.com/albums/hh507/pokermunkee/F250/IMG_20150731_173032264_HDR_zpsqxbbebg6.jpg)
YEAH!!!
The old lady had to make an unexpected trip overseas last night to go see her ill father which consists of taking two planes,prior to that a few years back same situation with her mother but unfortunetly she passed away right before she could make it there,oh well. Z
So sorry to hear, Z, hope her father recovers, and she can spend some time with him!
Quote from: SHOdded on August 05, 2015, 05:31:24 AM
So sorry to hear, Z, hope her father recovers, and she can spend some time with him!
Thanks -MANU
Z... I'll keep your family in my thoughts. Wishing for the best outcome for your family.
Quote from: ZSHO on August 05, 2015, 05:15:57 AM
The old lady had to make an unexpected trip overseas last night to go see her ill father which consists of taking two planes,prior to that a few years back same situation with her mother but unfortunetly she passed away right before she could make it there,oh well. Z
Sorry to hear this, my condolences to your family.
Best of wishes and prayers for your family Z...
Rich
Thanks guys,really appreciate the kind words and support,and truly its an honor to have such great guys on your side. Z
My upgrade plans are now on hold. we found out my fiancée is pregnant this past weekend! so now we are moving the wedding date up and there goes all of my disposable income for awhile. wedding/diapers > car parts
Congrats! At least tune it :)
x2 on the congrats! Great, great news, though I am afraid the big bang for your buck will still be, like PM pointed out, a tune for the SHO ;)
Quote from: SHOdded on August 05, 2015, 03:34:26 PM
x2 on the congrats! Great, great news, though I am afraid the big bang for your buck will still be, like PM pointed out, a tune for the SHO ;)
Agree^^^
For the price of a CAI you can tune it...with lifetime service... by buying a used tuner. At least from Unleashed or LME. That's what I did. Congrats on the coming addition. No one can afford kids (I have 4)... Just do a budget rearrangement.
Sad/Happy day. Finally gave-up/parted with my 2010 Steel Blue Metallic SHO. Most enjoyable vehicle I have owned-including several 60s era GTOs. This one topped them all. But age creeps in-not that I am old- just more difficult for spouse and I to get into/out of low vehicle. Tough when knees are higher than but in sitting position.
So parked in my drive is a 2016 Explorer Sport with all the goodies-no police interceptor package. Ingot Silver with 31 miles as she sits. (say that 3 times fast).
You didn't think I was going to give up the big ecoboost did you?
Now to figure out how to remove front license plate bracket. Dealer advertising plate. Had to sign paper that I would not charge them for advertising. Rear is easy. Front bracket not so much.
But it is nice. Will be exploring.
Gotta do whatcha gotta do, c! Glad to see ya kept it in the Ford EB family :thumb: Good luck with it, many happy memories! If it's anything like the Edge, the front license bracket is held on by rivets, which of course would need to be drilled out.
I guess after hearing about the largest recall for the Mazda CX-9 might make some Edge owners feel on the Edge after hearing about that and makes you wonder. Z http://www.nbcnews.com/business/autos/mazda-recalls-cx-9-suvs-prevent-loss-steering-n404486 (http://www.nbcnews.com/business/autos/mazda-recalls-cx-9-suvs-prevent-loss-steering-n404486)
Wow, that's no good! No such problems with the Edge, although water leaks are currently plaguing the 2015 MY.
Quote from: BiGMaC on August 05, 2015, 03:56:48 PM
Quote from: SHOdded on August 05, 2015, 03:34:26 PM
x2 on the congrats! Great, great news, though I am afraid the big bang for your buck will still be, like PM pointed out, a tune for the SHO ;)
Agree^^^
For the price of a CAI you can tune it...with lifetime service... by buying a used tuner. At least from Unleashed or LME. That's what I did. Congrats on the coming addition. No one can afford kids (I have 4)... Just do a budget rearrangement.
Quote from: PokerMunkee on August 05, 2015, 01:49:51 PM
Congrats! At least tune it :)
thanks! i'll ask for a tune for my birthday or Christmas. after looking at pics online, it looks like the rear springs are the right type that can be cut so I can bring the rear end down and that I can do for free! but it's going to still be awhile. very hectic few weeks ahead, gotta finish my annual training for the reserves, start school, wedding plan, baby doctor visits and my contracting job is switching company's so I gotta freshen up the resume and interview for my same job.... ughh
Quote from: 92BlackGT on August 06, 2015, 02:41:12 PM
Quote from: BiGMaC on August 05, 2015, 03:56:48 PM
Quote from: SHOdded on August 05, 2015, 03:34:26 PM
x2 on the congrats! Great, great news, though I am afraid the big bang for your buck will still be, like PM pointed out, a tune for the SHO ;)
Agree^^^
For the price of a CAI you can tune it...with lifetime service... by buying a used tuner. At least from Unleashed or LME. That's what I did. Congrats on the coming addition. No one can afford kids (I have 4)... Just do a budget rearrangement.
Quote from: PokerMunkee on August 05, 2015, 01:49:51 PM
Congrats! At least tune it :)
thanks! i'll ask for a tune for my birthday or Christmas. after looking at pics online, it looks like the rear springs are the right type that can be cut so I can bring the rear end down and that I can do for free! but it's going to still be awhile. very hectic few weeks ahead, gotta finish my annual training for the reserves, start school, wedding plan, baby doctor visits and my contracting job is switching company's so I gotta freshen up the resume and interview for my same job.... ughh
IDK, cutting springs on a 4500 lb car seems like a terrible idea.
It absolutely is a terrible idea..a lot of springs have a progressive rate meaning the spring rate is non linear.. So cutting them probably throws the design geometry out of whack. it's just a cheapo way to do something ...such a classy car to have a tasteless mod done to it..springs are so cheap
ehhh, i'm only going to cut 1/4 of a coil. and if the ride goes to heck, i'll get some H&R's or PP springs. it'll be an experiment, weeee!
I need more mounts for my goPro
Sent from my silver iPad Air 1 in a http://www.red.org/en/ smart case using an app called Tapatalky
Interesting viewpoint :D
Well plan is for when & if I ever do a huge burn out. Might look cool. Might have to move camera back. I wanna hear the turbos spool.
Sent from my silver iPad Air 1 in a http://www.red.org/en/ smart case using an app called Tapatalky
Cutouts installed? No shortage of sound then!
My F-250 looks like a real truck now!
(http://i1249.photobucket.com/albums/hh507/pokermunkee/F250/IMG_20150810_144302179_zpsuyfm7coy.jpg)
(http://i1249.photobucket.com/albums/hh507/pokermunkee/F250/IMG_20150808_201756861_HDR_zpsiy8r402k.jpg)
(http://i1249.photobucket.com/albums/hh507/pokermunkee/F250/IMG_20150810_132807832_HDR_zpsztfdzfde.jpg)
Looks good how did it do pulling the trailer?
Did well. I need to adjust my Equalizer hitch, should put more weight towards front axle. Never adjusted it after I raised the rear 3-4" and seems like bars aren't working as much.
Also need to figure out best PSI for the tires. 4wheel parts had them at 75 PSI, pretty rough on uneven pavement. I lowered to 70 PSI on trip home and felt a little better.
Definitely looks a lot better with the new setup, PM!
I have been waiting six weeks for an oem windshield,think would of had better sucess obtaining one for a Lambo,also have an inspection due soon and kind of getting annoying looking at this crack everyday. Z
Quote from: PokerMunkee on August 10, 2015, 05:22:58 PM
My F-250 looks like a real truck now!
(http://i1249.photobucket.com/albums/hh507/pokermunkee/F250/IMG_20150810_144302179_zpsuyfm7coy.jpg)
(http://i1249.photobucket.com/albums/hh507/pokermunkee/F250/IMG_20150808_201756861_HDR_zpsiy8r402k.jpg)
(http://i1249.photobucket.com/albums/hh507/pokermunkee/F250/IMG_20150810_132807832_HDR_zpsztfdzfde.jpg)
Truck looks great now!
Quote from: ZSHO on August 11, 2015, 10:10:28 AM
I have been waiting six weeks for an oem windshield,think would of had better sucess obtaining one for a Lambo,also have an inspection due soon and kind of getting annoying looking at this crack everyday. Z
Carlite still has no ETA, Z?
Quote from: SHOdded on August 11, 2015, 10:32:51 AM
Quote from: ZSHO on August 11, 2015, 10:10:28 AM
I have been waiting six weeks for an oem windshield,think would of had better sucess obtaining one for a Lambo,also have an inspection due soon and kind of getting annoying looking at this crack everyday. Z
Carlite still has no ETA, Z?
Spoke with a few people and still on National back order with no eta,just dont want to settle for an aftermarket which they have in stock,another note to mention is that the glass co assured me there would be no water intrusion because of the two layered glass structure hopefully. Z
Quote from: ZSHO on August 11, 2015, 10:10:28 AM
I have been waiting six weeks for an oem windshield,think would of had better sucess obtaining one for a Lambo,also have an inspection due soon and kind of getting annoying looking at this crack everyday. Z
I may have missed your response, are you going through a dealership or glass co?
Quote from: FoMoCoSHO on August 11, 2015, 02:44:00 PM
Quote from: ZSHO on August 11, 2015, 10:10:28 AM
I have been waiting six weeks for an oem windshield,think would of had better sucess obtaining one for a Lambo,also have an inspection due soon and kind of getting annoying looking at this crack everyday. Z
I may have missed your response, are you going through a dealership or glass co?
I'm dealing with safelite auto glass,also confirmed with my dealer about the glass being on back order and also they dont deal with windshield installs. Z
So I just called my local Safelite and chatted with them about my poor relative ZSHO who may have to come here to get glass.....none of their vendors have it either and she indicated she would have to order it from them or the local Ford dealership and the cost would be 447.43 installed.
I wonder wtf is going on.....
I did just read a blurb about a glass shortage , but that was an architecture website.
I will see if I can persuade MrsFoMoCoSHO to inquire about the situation.
Quote from: FoMoCoSHO on August 11, 2015, 05:04:05 PM
So I just called my local Safelite and chatted with them about my poor relative ZSHO who may have to come here to get glass.....none of their vendors have it either and she indicated she would have to order it from them or the local Ford dealership and the cost would be 447.43 installed.
I wonder wtf is going on.....
I did just read a blurb about a glass shortage , but that was an architecture website.
I will see if I can persuade MrsFoMoCoSHO to inquire about the situation.
Thats very kind of you indeed,the only issue is after i was approved for the oem glass by the insurance co which is affiliated with safelite they made an appt a week later to install it and the glass looked pretty much like mine and after the manager cross referenced the part #it was the wrong windshield.
I had to get an "aftermarket" windshield from safelite. That glass looks the same, has the same dot matrix pattern and tinting on the top, just a different name on it.
Although, I had a horrible experience with safelite and will never use them again. First they ordered the wrong windshield so I had to go in to the safelite shop for the install of the aftermarket glass. I asked the installer if the rain sensor worked and he said he sprayed the glass and it work. He lied to my face as the sensor wasn't even hooked up, just dangling in the rearview cover. They sent a mobile installer out to fix that but they didn't replace the sensor pad. A few days later it rained and the wipers intermittently worked on the auto setting. Then I go to spray my windshield and no water is spraying. I get home, fill up the reservoir and spray again and see the water pouring out under the car. The sumabish installer didn't even hook up the water lines! Oh, and they put scratches on my dash during the install.
They're coming later this morning to fix the sprayers and I'm getting my $425 reimbursed.
Has anyone seen these trunk organizers made by proguard which law enforcement uses,looks pretty cool,you can even store your fire exstinguisher,tools inside. Z http://www.policemag.com/channel/vehicles/news/2013/06/28/pro-gard-introduces-ford-pi-sedan-trunk-organizer.aspx (http://www.policemag.com/channel/vehicles/news/2013/06/28/pro-gard-introduces-ford-pi-sedan-trunk-organizer.aspx) http://www.policemag.com/_Images/news/L-Proguard-PI-trunk-organizer.jpg (http://www.policemag.com/_Images/news/L-Proguard-PI-trunk-organizer.jpg)
Quote from: ZSHO on August 12, 2015, 07:57:11 AM
Has anyone seen these trunk organizers made by proguard which law enforcement uses,looks pretty cool,you can even store your fire exstinguisher,tools inside. Z http://www.policemag.com/channel/vehicles/news/2013/06/28/pro-gard-introduces-ford-pi-sedan-trunk-organizer.aspx (http://www.policemag.com/channel/vehicles/news/2013/06/28/pro-gard-introduces-ford-pi-sedan-trunk-organizer.aspx) http://www.policemag.com/_Images/news/L-Proguard-PI-trunk-organizer.jpg (http://www.policemag.com/_Images/news/L-Proguard-PI-trunk-organizer.jpg)
Looks pretty cool!
http://www.pro-gard.com/product/ford-pi-sedan-trunk-organizer/ (http://www.pro-gard.com/product/ford-pi-sedan-trunk-organizer/)
I just wanted to finally give an update regarding the oem windshield which is on national back order,my service advisor was able to finally track one down and should be here in about ten days,unless i'm willing to pay 120.00 for next day delivery which opted out on,thanks to everyone especially FoMoCoSHO for your help and support throughout this whole ordeal. Z
That's great news, Z! BTW, someone on another forum was asking about the cargo organizers, and I pointed out the Pro-Gard PI offering, they were quite happy to learn about it!
SHOdded=forum gigolo
Quote from: FoMoCoSHO on August 14, 2015, 10:54:24 AM
SHOdded=forum gigolo
He sounds like me(BAM BAM THANK YOU MAM)LOL. Z
Quote from: SHOdded on August 14, 2015, 10:43:04 AM
That's great news, Z! BTW, someone on another forum was asking about the cargo organizers, and I pointed out the Pro-Gard PI offering, they were quite happy to learn about it!
Great to hear,always like sharing any findings on the ecoboost platform. Z
Quote from: FoMoCoSHO on August 14, 2015, 10:54:24 AM
SHOdded=forum gigolo
HA! Just for that, you get a :hug: Make of it what you will!
Hotter in Phx than usual. This screen appeared (I never saw it before) after about 30 min of blogging and videos...
(http://i1331.photobucket.com/albums/w596/knot2bfound/Mobile%20Uploads/image_zpspjcc150j.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Mobile%20Uploads/image_zpspjcc150j.jpg.html)
I get a similar message on my galaxy tab in he car sometimes.
Towing with the SHO? Don't think I have read/posted this article before:
http://www.rvlifemag.com/component/k2/item/419-40-6-ford-taurus-sho-eco-boost (http://www.rvlifemag.com/component/k2/item/419-40-6-ford-taurus-sho-eco-boost)
http://www.rvlifemag.com/component/k2/item/464-learn-something-new-every-year (http://www.rvlifemag.com/component/k2/item/464-learn-something-new-every-year)
http://www.rvlifemag.com/component/k2/item/461-to-boost-or-not-to-boost (http://www.rvlifemag.com/component/k2/item/461-to-boost-or-not-to-boost)
http://www.rvlifemag.com/component/k2/item/457-towing-through-the-years (http://www.rvlifemag.com/component/k2/item/457-towing-through-the-years)
In the first article I was surprised & impressed at towing a 6400lb camper without problems over a long distance with an SHO. This is more than 2 1/2 tons over the tow rating of the Taurus.
I know, right? So the tow rating on the SHO is 100% for real :)
Manu... Your new avatar makes me dizzy!
Or maybe it's not loading.
Must not be loading. Haven't changed it in quite some time ...
I just came back after an extensive trip with the family with plenty of cargo and averaged about 23.4 mpg with a/c blasting continously doing about 80-90 mpg,tried sticking with Shell 93 octane for most parts of the trip until i ran into a Chevron gas station which had 93 octane with techron,after initial fillup noticed my rpm gauge was acting erratic at idle and honestly had me a bit worried because being so far and hot out in the lovely state of Georgia,but for the most part did not think to much of it until my butt dyno went into over drive with the slightest touch of the gas pedal which definetly was a good thing,especially with all the stress and heat soak on the engine with continual driving,so for the next few hunded miles only used Chevron and definetly saw an increase in performance and wish it was available im my area,so for anyone that has access to Chevron would definetly recommend it. Z
Welcome back, Z! Glad you all had a great time! Maybe there IS something to Chevron (Techron) fuel ;) I did find that BP fuel in NJ when I was up there was much better for my Edge than any fuel (including BP) down here.
Quote from: SHOdded on August 24, 2015, 01:34:40 PM
Welcome back, Z! Glad you all had a great time! Maybe there IS something to Chevron (Techron) fuel ;) I did find that BP fuel in NJ when I was up there was much better for my Edge than any fuel (including BP) down here.
Thanx -MANU,surely wasnt a placebo effect with this being my DD,BTW had you in my mind while driving through the lovely state of M.D. Z
Quote from: ZSHO on August 24, 2015, 01:23:18 PM
I just came back after an extensive trip with the family with plenty of cargo and averaged about 23.4 mpg with a/c blasting continously doing about 80-90 mpg,tried sticking with Shell 93 octane for most parts of the trip until i ran into a Chevron gas station which had 93 octane with techron,after initial fillup noticed my rpm gauge was acting erratic at idle and honestly had me a bit worried because being so far and hot out in the lovely state of Georgia,but for the most part did not think to much of it until my butt dyno went into over drive with the slightest touch of the gas pedal which definetly was a good thing,especially with all the stress and heat soak on the engine with continual driving,so for the next few hunded miles only used Chevron and definetly saw an increase in performance and wish it was available im my area,so for anyone that has access to Chevron would definetly recommend it. Z
Welcome back Z... Missed your posts.
Regarding gas... I tried the new Shell Nitro Plus ... Even though we only get 91 octane in AZ. I was using chevron 91 before... After 2 tanks I went back to Chevron for the same reason... My SHO was definitely performing poorly on the Shell compared to Chevron and didn't need my equipment to tell for certain.... Plus I didn't win one of the 100 Bimis Shell is giving away.
Quote from: BiGMaC on August 24, 2015, 01:55:04 PM
Quote from: ZSHO on August 24, 2015, 01:23:18 PM
I just came back after an extensive trip with the family with plenty of cargo and averaged about 23.4 mpg with a/c blasting continously doing about 80-90 mpg,tried sticking with Shell 93 octane for most parts of the trip until i ran into a Chevron gas station which had 93 octane with techron,after initial fillup noticed my rpm gauge was acting erratic at idle and honestly had me a bit worried because being so far and hot out in the lovely state of Georgia,but for the most part did not think to much of it until my butt dyno went into over drive with the slightest touch of the gas pedal which definetly was a good thing,especially with all the stress and heat soak on the engine with continual driving,so for the next few hunded miles only used Chevron and definetly saw an increase in performance and wish it was available im my area,so for anyone that has access to Chevron would definetly recommend it. Z
Welcome back Z... Missed your posts.
Regarding gas... I tried the new Shell Nitro Plus ... Even though we only get 91 octane in AZ. I was using chevron 91 before... After 2 tanks I went back to Chevron for the same reason... My SHO was definitely performing poorly on the Shell compared to Chevron and didn't need my equipment to tell for certain.... Plus I didn't win one of the 100 Bimis Shell is giving away.
Thanx Tom,definetly agree and thank you guys for the warm welcome. Z
Quote from: BiGMaC on August 24, 2015, 01:55:04 PM
Plus I didn't win one of the 100 Bimis Shell is giving away.
NOW we get to the heart of the "I HATE SHELL" matter LOL ...
LOL...
I don't hate Shell... But the big girl doesn't like it as much as Chevron..
I saw a 13 SHO UP FOR SALE with 30k on her for 30,999 holding its value fairly well,of course with a walmart everstart battery included,makes you wonder sometimes. Z http://www.findlaynorthvw.com/used/Ford/2013-Ford-Taurus-65b5dd9e0a0a00e0654ab7d035067f13.htm (http://www.findlaynorthvw.com/used/Ford/2013-Ford-Taurus-65b5dd9e0a0a00e0654ab7d035067f13.htm)
I purchased an apim module to add navigation to my vehicle a few months back from Jason over at www.fordpimods.com (http://www.fordpimods.com),as mentioned earlier overall great guy and exceptional customer service to say the least,while on vacation it sure came in handy and worked flawlessly,noticed while returning home that the the sirius travel link is active which was a big surprise and never had or acquired this feature,pretty cool though,maybe Jason will chime in later on this topic. Z
Very cool Z! Did it require any dealer flashing?
Nice! Sirius travel link will occasionally go active as a promotion...my guess is that you will eventually lose it but enjoy it while you can.
Free sirius radio until9/8
http://m.siriusxm.com/sxmlp315d?sxmlpId=GWB_SEM_Q3-Q4-2015_Search_FL&IgnitionOne=SI_829085940_7378396505_1&utm_source=sem_Yahoo!|Bing&utm_medium=sem_&utm_campaign=SEM_YB_Search_Brand_Beta_Free&utm_term=sem_Broad%20Match_+free++sirius++radio (http://m.siriusxm.com/sxmlp315d?sxmlpId=GWB_SEM_Q3-Q4-2015_Search_FL&IgnitionOne=SI_829085940_7378396505_1&utm_source=sem_Yahoo!%7CBing&utm_medium=sem_&utm_campaign=SEM_YB_Search_Brand_Beta_Free&utm_term=sem_Broad%20Match_+free++sirius++radio) I think it is only for radio not travel link as I'm already a Sirius user and have not seen any free extra services like travel link. :-(
Quote from: BiGMaC on August 28, 2015, 10:19:46 AM
Very cool Z! Did it require any dealer flashing?
I had my buddy at Ford add navigation(instead of compass)to the right side of the instrument cluster with IDS software. Z
Thanks for all the repys brothers,just confirmed with Jason and indeed it was a free trial period,so guess that everyone that has (NAVI)should check to see if the siruis travel link is active,(ENJOY WHILE IT LASTS)Thanks. Z
Yes they tease you with it not to mention goes to prove that Travel Link etc can be enabled in post factory navigation setups that are done properly.
Quote from: jmr061 on August 28, 2015, 05:29:25 PM
Yes they tease you with it not to mention goes to prove that Travel Link etc can be enabled in post factory navigation setups that are done properly.
I love the travel link when I'm on the road... However even though the trial is enabled if you don't renew after the 6 month trial it likely will quit since Sirius sends a code from their server directly to your car to enable the regular subscription telling the APIM you're current.
Quote from: BiGMaC on August 28, 2015, 05:35:14 PM
Quote from: jmr061 on August 28, 2015, 05:29:25 PM
Yes they tease you with it not to mention goes to prove that Travel Link etc can be enabled in post factory navigation setups that are done properly.
I love the travel link when I'm on the road... However even though the trial is enabled if you don't renew after the 6 month trial it likely will quit since Sirius sends a code from their server directly to your car to enable the regular subscription telling the APIM you're current.
Just to clear things up the Sirius satellite receiver is in the ACM (audio control module aka cd player which houses the AM/FM receiver as well). The APIM only is a display for the Sirius Radio.
Quote from: jmr061 on August 28, 2015, 06:08:07 PM
Quote from: BiGMaC on August 28, 2015, 05:35:14 PM
Quote from: jmr061 on August 28, 2015, 05:29:25 PM
Yes they tease you with it not to mention goes to prove that Travel Link etc can be enabled in post factory navigation setups that are done properly.
I love the travel link when I'm on the road... However even though the trial is enabled if you don't renew after the 6 month trial it likely will quit since Sirius sends a code from their server directly to your car to enable the regular subscription telling the APIM you're current.
Just to clear things up the Sirius satellite receiver is in the ACM (audio control module aka cd player which houses the AM/FM receiver as well). The APIM only is a display for the Sirius Radio.
You are correct good sir... I stand corrected on that point :beer2:
I found some great informative videos ,enjoy. Z http://www.ford.com/fordpoliceinterceptor/#/fordpoliceinterceptor/testdrive/AWD_Tech/ (http://www.ford.com/fordpoliceinterceptor/#/fordpoliceinterceptor/testdrive/AWD_Tech/)
Great Vids thanks!
Those should clear up some of the misconceptions about gen 4.2 AWD. (max power transfer, etc)
Quote from: FoMoCoSHO on August 29, 2015, 09:33:21 AM
Great Vids thanks!
Those should clear up some of the misconceptions about gen 4.2 AWD. (max power transfer, etc)
Exactly,found a great site also,very intuitive in many aspects. Z http://www.hendonpub.com/resources/article_archive/results/details?id=5063 (http://www.hendonpub.com/resources/article_archive/results/details?id=5063) http://www.hendonpub.com/resources/article_archive/results/details?id=5230 (http://www.hendonpub.com/resources/article_archive/results/details?id=5230)
http://www.ford.com/fordpoliceinterceptor/features/#/durability/durability_05/ (http://www.ford.com/fordpoliceinterceptor/features/#/durability/durability_05/)
So they have this instead of the cover with none of the high speed issues?
I will take one with a side of ballistic door panels, lol
Interesting article about the Chicago plant where our beasts are built...
http://www.hendonpub.com/resources/article_archive/results/details?id=5384 (http://www.hendonpub.com/resources/article_archive/results/details?id=5384)
Quote from: FoMoCoSHO on August 29, 2015, 09:53:04 AM
http://www.ford.com/fordpoliceinterceptor/features/#/durability/durability_05/ (http://www.ford.com/fordpoliceinterceptor/features/#/durability/durability_05/)
So they have this instead of the cover with none of the high speed issues?
I will take one with a side of ballistic door panels, lol
X2 on that,wonder if there having issues with the winshields,BTW have an appt Mon finally for install. Z
Hope you guys enjoyed it as much as i did,BTW there is a part 2 article also,enjoy. Z http://www.hendonpub.com/resources/article_archive/results/details?id=1739 (http://www.hendonpub.com/resources/article_archive/results/details?id=1739) (sync system)
Good info Z.... Also glad you're finally getting that windshield... And that the supply chain appears to have caught up with demand.
Quote from: BiGMaC on August 29, 2015, 10:52:31 AM
Good info Z.... Also glad you're finally getting that windshield... And that the supply chain appears to have caught up with demand.
Thanx Tom just received a call from Safelite and there pushing my appt to wed 9/2 because the glass is coming from a Ford dealer out in mid-west,hope there not B.S ME. Z
Any of you folks from Canadia into those Blue Jays? Not too shabby eh?
I was in Toronto last march for a weekend getaway...I was impressed with how many people had snow tires on their cars....I wish all the retards in Pittsburgh would do the same
I have an appt tomorrow to finally have my windshield installed after almost waiting two months for an oem glass,so figured i'll give Safelite a call to confirm my appt and to verify that they have the glass before making the trip to a different state,spoke with the manager of safelite and tells me the same story since day one(NO ETA )UNREAL. BTW cant mention the rest that was said after that. Z >:( >:(
Man these guys need to get their act together!!! Sorry you have to face such delays, Z, it is intolerable.
Well I traded the 2010 SHO-59625 miles. New-2016 X Sport-all bells and whistles. Got a good deal-considering SHO would need some wheel reconditioning-new rear tail lamp-an inch of water inside, and rear back-up sensors needed replaced. Now i see they have dropped the price to $20,995 from original asking price of $29,995. HUH??? Guess the drop of 9K looks good in the copy-but the 29,995 is what I paid 5 years gone by. I guess that is why the dealers are in the business.
Safelite will never get my business again
Safelite do hack jobs. I used to work at binswenger glass and did automotive and commercial glass installs and we aaaaalways had safelite customers come to us because their jobs were jacked up
Sent from my iPhone using Tapatalk
So how do you find a good installer?
I would definetly put Safelite on the avoid list,BTW they called me last thurday and friday to schedule an appt and after that they send me an email that the camera built in the windshield needs to be recalibrated by the Ford dealer.ummm. Z Windshield Service Notice
Thank you for choosing Safelite AutoGlass! We are looking forward to seeing you on Monday, August 31, 2015 at 8:00 AM.
As a reminder, your windshield is fitted with a forward-facing camera linked to an advanced driver assistance system. Some vehicle manufacturers require a recalibration of the camera system after a windshield replacement. You must check with your vehicle manufacturer in order to determine whether the camera system must be recalibrated. If so, you must go to a dealership (or other qualified specialist) to have your camera system recalibrated as soon as possible after the replacement of your windshield.
NOTE: The camera may not operate properly until it has been recalibrated. Some camera systems have a warning symbol or a message MAY appear if the system is not operating properly, so you should not rely on the operation of camera-linked systems until the camera SYSTEM has been properly recalibrated.
Good info Z
I will say that with the OEM widshield I have never had to recalibrate... Even done theough the dealer. Thought the camera on the windshield only was used to measure refraction of light to turn on the automatic wipers and control their speed... Does it do other things?
My window was removed and replaced and I was told nothing about the recal. I will ask the Mrs to find out if this is an issue with our cars.
Quote from: BiGMaC on September 02, 2015, 09:42:00 AM
Good info Z
I will say that with the OEM widshield I have never had to recalibrate... Even done theough the dealer. Thought the camera on the windshield only was used to measure refraction of light to turn on the automatic wipers and control their speed... Does it do other things?
I'not quite sure,but it could be related to the collision warning system on the non PP SHO. Z https://www.youtube.com/watch?v=K2o5BtSlbJ4 (https://www.youtube.com/watch?v=K2o5BtSlbJ4) https://www.youtube.com/watch?v=G6UeVkFoQNo (https://www.youtube.com/watch?v=G6UeVkFoQNo)
According to ford the camera is part of the lane keeping system and does need to be calibrated after replacing the windshield.
https://owner.ford.com/how-tos/vehicle-features/safety/lane-keeping-system.html
Wonder what that entails since my windshield is being replaced next Tuesday.
Quote from: dfwSHO on September 02, 2015, 12:04:02 PM
According to ford the camera is part of the lane keeping system and does need to be calibrated after replacing the windshield.
https://owner.ford.com/how-tos/vehicle-features/safety/lane-keeping-system.html
Wonder what that entails since my windshield is being replaced next Tuesday.
Likely a dealer trip dfw. I don't have lane keeping on the '13... Never had a problem with the collision avoidance system except scaring passengers, LOL. PROBABLY WHY I never had a problem.
Rotfl. The funny thing is I choose this particular SHO over one with PP for lane keeping and adaptive cruise. Makes driving the freeways much easier. It is fun when the collision avoidance lights up and your passenger has no idea what is going on. Sometimes I'll increase its sensitivity just to freak somebody out. Added to a burst of WOT and you have a perfect recipe for somebody that will never ride with you again.
Sent from my iPhone using Tapatalk
I did the same for the ACC.... Use it every day (when I can drive). And the BLISS is great too.
Yea, the flashing red windshield definitely gets their attention, LOL!
Where to get reproduction decals for your vehicle (originals must be in good enough shape to reproduce) :
http://www.ecsvin.com/order.php (http://www.ecsvin.com/order.php)
Quote from: SHOdded on September 02, 2015, 02:27:57 PM
Where to get reproduction decals for your vehicle (originals must be in good enough shape to reproduce) :
http://www.ecsvin.com/order.php (http://www.ecsvin.com/order.php)
Great info Manu.... Thanks! But jeez, for those prices I feel like I should pull the existing off and store them in the glove box.
Sure seems like it, right? Probably more for resto-modders.
Quote from: SHOdded on September 02, 2015, 02:38:28 PM
Sure seems like it, right? Probably more for resto-modders.
Must be... BTW, my anti-theft numbers are etched into the windows.
Quote from: ajpturbo on August 31, 2015, 01:17:21 AM
Any of you folks from Canadia into those Blue Jays? Not too shabby eh?
yes
Sent from my silver iPad Air 1 in a http://www.red.org/en/ smart case using an app called Tapatalky
Quote from: 2Canches on September 03, 2015, 01:45:54 AM
Quote from: ajpturbo on August 31, 2015, 01:17:21 AM
Any of you folks from Canadia into those Blue Jays? Not too shabby eh?
yes
Good lord, I'm moving to canadia
Sent from my silver iPad Air 1 in a http://www.red.org/en/ (http://www.red.org/en/) smart case using an app called Tapatalky
Tom Brady's suspension has been nullified and he will play week one against the steelers....cry me a river all you dumbass steeler fans!...steelers will lose 40-10...
Pittsburgh will have 2 dope heads suspended for weed so don't cry about Brady lol
So the NFL rules mean nothing if you're a Patriot...lol
OR they make up new rules on the go if needed...ha
Sent from my SM-N920V using Tapatalk
I'm from pitt and live here now and u should here the uproar and crying....this is so satisfying....I'm not sure why I'm enjoying this but I am lol..
Patriots vs steelers...or should it be cheaters and murderers vs dope heads and thugs and women beaters lol...love the thug life that is the nfl lol.
Brady
Hernandez
Pouncy
Harrison
Bryant
Bell
Roethlisberger
All criminals, thugs. Cheaters and lewd activity lol I love it...I just think it's funny...I'd have a whole team of them just to win lol
The list goes on...if you have a special talent nowadays, you can get away with murder...literally
Sent from my SM-N920V using Tapatalk
Its amazing how much effed up stuff is happening yet a stupid ass game is the only thing that get the sheople fired up.
Shameful....
Coz you don't have to think ... I mean, who'd rather be out volunteering helping people, when you can enjoy the boob toob and tear down people to your heart's content? C'mon.
Who thinks dr phil's face looks like it was made for punching?
Quote from: FoMoCoSHO on September 03, 2015, 10:51:05 AM
Who thinks dr phil's face looks like it was made for punching?
Like in the movie fight club when come up with fantasy match ups for fights, dr Phil is on my list lol....
Thanks fomo my new word is sheople lol...I call people lemmings a lot lol
I just came back from my friendly dealer,but will update you with my findings in a bit. Z
☆。★。☆。★
。☆。。☆。
★。\|/。★
Happy Labor Day
★。/|\。★
。☆。 。☆。
☆。★。☆。★
Be safe! Have fun all!
Can always count on you for the best graphics :thumb:
Happy Labor Day! Food, Family, Fun!
I have noticed a couple of key issues since performing an intake cleaning at the dealer,1)the temp gauge on the dash seems to fluctuate more often than before,2)on morning cold startups the idle drops down much quicker than before leading me to believe it was needed especially at 31k ,also my ***dyno sees an improvment in performance but will definetly keep you updated on a couple of track meetups this month to see any benefits. Z
Quote from: ZSHO on September 06, 2015, 07:53:38 PM
I have noticed a couple of key issues since performing an intake cleaning at the dealer,1)the temp gauge on the dash seems to fluctuate more often than before,2)on morning cold startups the idle drops down much quicker than before leading me to believe it was needed especially at 31k ,also my ***dyno sees an improvment in performance but will definetly keep you updated on a couple of track meetups this month to see any benefits. Z
Interesting Z.... Wonder if the TStat is trying to cycle... That "gauge" is coolant temp isn't it.... And the slow down in idle... Isn't that occurring when the electrically heated rear O2 sensor reaches operating temperature? Do you think EGTs are rising faster? Maybe more intake are and better combustion.... Making me wonder...
Quote from: BiGMaC on September 06, 2015, 08:06:34 PM
Quote from: ZSHO on September 06, 2015, 07:53:38 PM
I have noticed a couple of key issues since performing an intake cleaning at the dealer,1)the temp gauge on the dash seems to fluctuate more often than before,2)on morning cold startups the idle drops down much quicker than before leading me to believe it was needed especially at 31k ,also my ***dyno sees an improvment in performance but will definetly keep you updated on a couple of track meetups this month to see any benefits. Z
Interesting Z.... Wonder if the TStat is trying to cycle... That "gauge" is coolant temp isn't it.... And the slow down in idle... Isn't that occurring when the electrically heated rear O2 sensor reaches operating temperature? Do you think EGTs are rising faster? Maybe more intake are and better combustion.... Making me wonder...
That pic was after an hour long drive on a 91 deg day and definetly was cycling at that point but never that low based on the gauge,now with the idle it drops down pretty quickly compared to before,figure roughly around 30 second upon startup which is intresting,then it will take five min for complete warmup. Z
If anyone is in need of a good fuel system cleaner found a great price on amazon for a pack of two cans of BG-Cleaner. Z http://www.amazon.com/Bg44k-System-Cleaner-Power-Enhancer/dp/B00K0T94LC/ref=pd_rhf_cr_s_cp_6?ie=UTF8&refRID=11DSA0AAPJQ771XQNJGV (http://www.amazon.com/Bg44k-System-Cleaner-Power-Enhancer/dp/B00K0T94LC/ref=pd_rhf_cr_s_cp_6?ie=UTF8&refRID=11DSA0AAPJQ771XQNJGV)
Not bad at all!
Not cars I know, but early all of North America will have a chance to see something truly amazing later this month when three celestial events – a full moon, a supermoon, and a lunar eclipse – will coincide for a few hours. This won't happen again until 2033... So if your interested it could be your last chance. Optimal viewing is 7:15-8:15pm Pacific on Sept 27.
Quote from: BiGMaC on September 09, 2015, 10:57:17 AM
Not cars I know, but early all of North America will have a chance to see something truly amazing later this month when three celestial events – a full moon, a supermoon, and a lunar eclipse – will coincide for a few hours. This won't happen again until 2033... So if your interested it could be your last chance. Optimal viewing is 7:15-8:15pm Pacific on Sept 27.
Big mac that is when my people are coming...I'm part alien if you guys haven't figured that out by now
Quote from: ajpturbo on September 09, 2015, 12:25:05 PM
Quote from: BiGMaC on September 09, 2015, 10:57:17 AM
Not cars I know, but early all of North America will have a chance to see something truly amazing later this month when three celestial events – a full moon, a supermoon, and a lunar eclipse – will coincide for a few hours. This won't happen again until 2033... So if your interested it could be your last chance. Optimal viewing is 7:15-8:15pm Pacific on Sept 27.
Big mac that is when my people are coming...I'm part alien if you guys haven't figured that out by now
You too!?
Robot alien here.....see avatar
Quote from: FoMoCoSHO on September 09, 2015, 01:29:18 PM
Robot alien here.....see avatar
Spent my afternoons watching Voltron.
The return of the (TWILIGHT ZONE). BTW think it starts between 6-7pm out here in the east coast. Z
Quote from: ZSHO on September 09, 2015, 02:03:26 PM
The return of the (TWILIGHT ZONE). BTW think it starts between 6-7pm out here in the east coast. Z
11:15 pm start for the east coast according to NASA... Just so you don't miss my cousin's mothership crossing the eclipsed supermoon, LOL.
Great news for all you treck guys out there. Z
Going out of business sale! Never again discounts! Oh wait, typo, never mind :D
Autonation Ford has just publicly pledged not to sell cars with outstanding recalls.... Pr move or po icy change?
Wish the same could happen for TSBs!
Either way, the consumer should be the winner.
Quote from: BiGMaC on September 11, 2015, 11:27:04 AM
Autonation Ford has just publicly pledged not to sell cars with outstanding recalls.... Pr move or po icy change?
Wish the same could happen for TSBs!
Then they will be out of business. There are not enough bays, techs, or parts to deal with the current volume.
A Tsb has nothing to do with a recall or your contracted warranty. Any tsbs handled outside of the warranty period should be considered gifts because they are.
Just because a tsb has been issued doesn't even mean your car is affected. Should Ford and the end consumer pay for diagnostic time for something that's not exhibiting any issues? Hell, just issue a Tsb on the entire car cause everything on it will break with enough time or age.
My personal opinion is that anybody buying a car from any manufacturer shouldn't buy it if they cant afford the extended warranty. Cars being so complicated and expensive to fix pretty much guarantees that you will win on the deal. The other option is to make sure you dump it before the factory period expires.
Not exercising those options and then expecting Ford to fix everything for free in perpetuity just seems a little ridiculous.
Agree on the extended warranty FoMoCo.... Mine have always paid for themselves and I have found that at the dealer I can negotiate pricing.
I sure agree with every ones statement above how crucial is to have an extended warranty on our cars and especially with an AWD and a twin turbo setup is a must have,BTW glad FoMoCoSHO is not my service manager because would of probably sold my car a long time ago. LOL. Z
Quote from: ZSHO on September 11, 2015, 03:39:22 PM
I sure agree with every ones statement above how crucial is to have an extended warranty on our cars and especially with an AWD and a twin turbo setup is a must have,BTW glad FoMoCoSHO is not my service manager because would of probably sold my car a long time ago. LOL. Z
Nah, Z you'd find out fast that I go to the mat for my guests. I'd work within my commitments to Ford motor company and the commitment to my guest along with the generous goodwill money that Ford provides dealers to get folks handled. I have an idea of the numbers involved in a busy service dept and there is a lot of leeway to do the right thing or at least come to an agreeable compromise in most situations.
Ford does plenty wrong but it seems like folks on car forums dont want to see any perspective except their own and most of the time its 180 degrees out of reality.
I've said it before I'd scrap the whole franchised dealer concept, its not good for Ford, their guests, or a whole bunch of people at those dealerships trying to do right by both yet caught in the middle.
I'm just trying to provide a little bit of balanced perspective since I happen to have an inside view and participate from the other side as well.
I would never ask MrsFoMoCoSHO to do anything for me that she wouldn't or couldn't do for another guest. If I blow up my car doing something stupid I wont get special treatment, I will get out my checkbook... Unless of course Ford offered me some goodwill cash because we have a 98% loyalty score. Ford actually does things like that from time to time.
Quote from: FoMoCoSHO on September 11, 2015, 04:17:32 PM
Quote from: ZSHO on September 11, 2015, 03:39:22 PM
I sure agree with every ones statement above how crucial is to have an extended warranty on our cars and especially with an AWD and a twin turbo setup is a must have,BTW glad FoMoCoSHO is not my service manager because would of probably sold my car a long time ago. LOL. Z
Nah, Z you'd find out fast that I go to the mat for my guests. I'd work within my commitments to Ford motor company and the commitment to my guest along with the generous goodwill money that Ford provides dealers to get folks handled. I have an idea of the numbers involved in a busy service dept and there is a lot of leeway to do the right thing or at least come to an agreeable compromise in most situations.
Ford does plenty wrong but it seems like folks on car forums dont want to see any perspective except their own and most of the time its 180 degrees out of reality.
I've said it before I'd scrap the whole franchised dealer concept, its not good for Ford, their guests, or a whole bunch of people at those dealerships trying to do right by both yet caught in the middle.
I'm just trying to provide a little bit of balanced perspective since I happen to have an inside view and participate from the other side as well.
I would never ask MrsFoMoCoSHO to do anything for me that she wouldn't or couldn't do for another guest. If I blow up my car doing something stupid I wont get special treatment, I will get out my checkbook... Unless of course Ford offered me some goodwill cash because we have a 98% loyalty score. Ford actually does things like that from time to time.
S.you are absolutly right because you da man. Z
I just wanted to give an update regarding the oem windshield thats on national back order,let me just start off by saying if your in the N.J AREA and need an oem windshield through safelite you can pm me anytime,figured let me post it here and help someone out rather than wait weeks to months to order it,basically was tired on waiting and picked another installer which was recommended by my dealer,hope this helps someone out and its very limited time basis. Z
Nothing like a little mosquito borne encephalitis to put a damper on things...
FML
Culex love not good enough for you, FoMoCo?
BTW, tried the Black & Tan. Pretty smooth!
Quote from: SHOdded on September 14, 2015, 10:06:40 PM
Culex love not good enough for you, FoMoCo?
BTW, tried the Black & Tan. Pretty smooth!
Lol, glad you enjoyed it. Its part of my post hospitalization soft food diet, lol.
I could've went my entire life without that kind of love!
122 guests !!!!!! :gathering:
Here's today's morning smile... ?Better to buy a holster?
http://crooksandliars.com/2014/06/yet-another-responsible-gun-owner-shoots (http://crooksandliars.com/2014/06/yet-another-responsible-gun-owner-shoots)
Lots of discussion lately on AD's with appendix carry (while using a holster). It might be comfortable under certain circumstances but not worth it IMO.
Quote from: BiGMaC on September 15, 2015, 11:04:26 AM
Here's today's morning smile... ?Better to buy a holster?
http://crooksandliars.com/2014/06/yet-another-responsible-gun-owner-shoots (http://crooksandliars.com/2014/06/yet-another-responsible-gun-owner-shoots)
Rule #1 keep you booger hook off the bang switch!!! If it was the pictured 1911 there are at least 2 safeties on that thing.
He was probably carrying a GLOCK lol.
.45 to the penis.. I don't think the spent round was the only think that fell out when he took off his pants.
Good thing it was only a warning round.
It's really unfortunate for all of us that it didn't blow his ding a ling clean off....the gene pool has become really contaminated nowadays and this could've prevented future degenerates from being born and breathing oxygen that belongs to me
Put the SHO up on Craigslist for kicks. http://cosprings.craigslist.org/cto/5220696476.html (http://cosprings.craigslist.org/cto/5220696476.html)
If someone wants to give me $27K for my SHO, it's gone. Otherwise, I'm keeping her another 3 years.
Only email was someone wanting my tune and exhaust. It's safe for now! :D
Quote from: BiGMaC on September 09, 2015, 03:38:25 PM
Quote from: ZSHO on September 09, 2015, 02:03:26 PM
The return of the (TWILIGHT ZONE). BTW think it starts between 6-7pm out here in the east coast. Z
11:15 pm start for the east coast according to NASA... Just so you don't miss my cousin's mothership crossing the eclipsed supermoon, LOL.
8) 8)
It has been two weeks since having an intake cleaning performed at my friendly dealer and figured let me update my findings,car definetly feels stronger than ever as mentioned on my initial post,noticed my mpg has significantly improved and averaging about 19.5 city,also based on my temp gauge the car is also running cooler as mentioned earlier,so basically the chemical is dripped into a vacuum line by a special tool that ford uses,then they removed the intake and cleaned the throttle plates by hand and after further examination the the throttle plate indeed looked very clean,just for assurance purposes,personally the reason i had this performed was because of the sluggish performance and the poor mpg that the car was exhibiting for well over a ear now,hope this this helps someone out in determining if such procedure is warranted. Z
Any idea which vacuum line they use?
Quote from: 66 Galaxie on September 17, 2015, 11:26:21 AM
Any idea which vacuum line they use?
I guess thats the magic question!!!! let me try to find out for ya. Z
The drip was performed into the vacuum line right next to the battery!!!!. Z
Anyone happen to know the flow capacity of our injectors...TIA
Sent from my SM-N920V using Tapatalk
Quote from: SHOnUup on September 18, 2015, 01:53:15 PM
Anyone happen to know the flow capacity of our injectors...TIA
Sent from my SM-N920V using Tapatalk
http://products.bosch-mobility-solutions.com/media/en/ubk_europe/db_application/downloads/pdf/antrieb/de_5/gs_datenblatt_magnet_hochdruck_einspritzventil_hdev5_de.pdf (http://products.bosch-mobility-solutions.com/media/en/ubk_europe/db_application/downloads/pdf/antrieb/de_5/gs_datenblatt_magnet_hochdruck_einspritzventil_hdev5_de.pdf)
I've tried to find specs for our specific ones but no joy so far. IIRC, ours uses a 5 hole configuration.
There is a higher flow injector HDEV5.2
Quote from: FoMoCoSHO on September 18, 2015, 02:04:00 PM
Quote from: SHOnUup on September 18, 2015, 01:53:15 PM
Anyone happen to know the flow capacity of our injectors...TIA
Sent from my SM-N920V using Tapatalk
http://products.bosch-mobility-solutions.com/media/en/ubk_europe/db_application/downloads/pdf/antrieb/de_5/gs_datenblatt_magnet_hochdruck_einspritzventil_hdev5_de.pdf (http://products.bosch-mobility-solutions.com/media/en/ubk_europe/db_application/downloads/pdf/antrieb/de_5/gs_datenblatt_magnet_hochdruck_einspritzventil_hdev5_de.pdf)
I've tried to find specs for our specific ones but no joy so far. IIRC, ours uses a 5 hole configuration.
There is a higher flow injector HDEV5.2
Thank you...
So much fuel discussion to read up on. But it seems the hurdles in beefing up injectors and pumps would be a very costly effort?
Buddy on good ol FB thinks it's just a simple upgraded HPFP needed?
Sent from my SM-N920V using Tapatalk
I've been contacted by a company that converts DI vehicles to full flex fuel. They have quite a few GM conversions under their belt and It looks like they are moving forward and we will have a solution forthcoming.
Bosch motorsports has upgraded pumps and injectors but with our cars, it's just not as simple as slapping a pump and higher flow injector in and going. Cam profile, overpressure, driveability, emissions, injector spray patterns, etc. Sometimes this stuff makes my head hurt, LOL!
So yeah, a one off application would most likely be very expensive.
Quote from: FoMoCoSHO on September 18, 2015, 02:43:11 PM
I've been contacted by a company that converts DI vehicles to full flex fuel. They have quite a few GM conversions under their belt and It looks like they are moving forward and we will have a solution forthcoming.
Bosch motorsports has upgraded pumps and injectors but with our cars, it's just not as simple as slapping a pump and higher flow injector in and going. Cam profile, overpressure, driveability, emissions, etc.
So yeah, a one off application would most likely be very expensive.
Thank you for the summary of goods I was looking for. Saved me about 2 hours of reading and searching kind sir!!!
Sent from my SM-N920V using Tapatalk
Quote from: SHOnUup on September 18, 2015, 02:47:59 PM
Quote from: FoMoCoSHO on September 18, 2015, 02:43:11 PM
I've been contacted by a company that converts DI vehicles to full flex fuel. They have quite a few GM conversions under their belt and It looks like they are moving forward and we will have a solution forthcoming.
Bosch motorsports has upgraded pumps and injectors but with our cars, it's just not as simple as slapping a pump and higher flow injector in and going. Cam profile, overpressure, driveability, emissions, etc.
So yeah, a one off application would most likely be very expensive.
Thank you for the summary of goods I was looking for. Saved me about 2 hours of reading and searching kind sir!!!
Sent from my SM-N920V using Tapatalk
It's been in my Bosch thread under the E-85 section the whole time, lol!
I remember, the one with like 5 massive links...the summary was exactly what I was looking for. Appreciate it.
Sent from my SM-N920V using Tapatalk
Here's a link to a page that will let you look up what time and how well you can see each part of tomorrow's lunar eclipse/blood moon/supermoon in a major city near you.... Not like this again for 33yrs...
http://www.vercalendario.info/en/moon/united_states-27-september-2015.html#Phoenix,%20Arizona (http://www.vercalendario.info/en/moon/united_states-27-september-2015.html#Phoenix,%20Arizona)
Last night's eclipse...
(http://i1331.photobucket.com/albums/w596/knot2bfound/Mobile%20Uploads/1443489545.jpg_zpsfbtw3iwm.gif) (http://s1331.photobucket.com/user/knot2bfound/media/Mobile%20Uploads/1443489545.jpg_zpsfbtw3iwm.gif.html)
Now back to cars....
I am due for an inspection tommorrow and figured let me just revert back to stock tune,while swapping the map sensors,placed one right by the hood lock and ultimately fell down the gap and is lodged between the intercooler and bumper,all this happened just because of being in a rush to p/up my kids from school,so lesson learned DO NOT PLACE ANYTHING BY THE HOOD LOCK AREA,guess you learn something new everyday. Z
Quote from: ZSHO on September 30, 2015, 04:49:05 PM
I am due for an inspection tommorrow and figured let me just revert back to stock tune,while swapping the map sensors,placed one right by the hood lock and ultimately fell down the gap and is lodged between the intercooler and bumper,all this happened just because of being in a rush to p/up my kids from school,so lesson learned DO NOT PLACE ANYTHING BY THE HOOD LOCK AREA. Z
One of these has saved my a** many times.
(http://images.tapatalk-cdn.com/15/09/30/3519dc353e0e1e0079b85f69416cf82b.jpg)
Quote from: glock-coma on September 30, 2015, 04:52:37 PM
Quote from: ZSHO on September 30, 2015, 04:49:05 PM
I am due for an inspection tommorrow and figured let me just revert back to stock tune,while swapping the map sensors,placed one right by the hood lock and ultimately fell down the gap and is lodged between the intercooler and bumper,all this happened just because of being in a rush to p/up my kids from school,so lesson learned DO NOT PLACE ANYTHING BY THE HOOD LOCK AREA. Z
One of these has saved my a** many times.
(http://images.tapatalk-cdn.com/15/09/30/3519dc353e0e1e0079b85f69416cf82b.jpg)
Thanks Glock,seems to be quite an unique tool,harbor freights?
You can find them almost anywhere that sells hand tools.
It's called a flexible claw pickup tool.
Here's a harbor freight link.
http://m.harborfreight.com/24-inch-2-in-1-pickup-tool-94162.html?utm_referrer=direct%2Fnot%20provided
I know Home Depot, lowes, and Sears sells them.
Most auto parts stores sell them as well
Quote from: glock-coma on September 30, 2015, 05:03:58 PM
You can find them almost anywhere that sells hand tools.
It's called a flexible claw pickup tool.
Here's a harbor freight link.
http://m.harborfreight.com/24-inch-2-in-1-pickup-tool-94162.html?utm_referrer=direct%2Fnot%20provided (http://m.harborfreight.com/24-inch-2-in-1-pickup-tool-94162.html?utm_referrer=direct%2Fnot%20provided)
I know Home Depot, lowes, and Sears sells them.
Most auto parts stores sell them as well
Thanks,there;s always going to be a tool that your missing,was able to get to it with my portable vacuum flex hose. Z
I just wanted to give a quick update on my emmissions testing as mentioned yesterday,reverted back to stock tune and early this morning plugged in my mx adapter and turned on torque pro and went on the expressway doing about 65 mph and within roughly about (12 miles)torque showed I/M readiness complete and then visited my friendly emmissions testing center and passed with flying colors,(almost done here)if anyone lives in a strict emmission state as i do and is skeptical about passing testing just dont think twice,this is based on my signature within a two year period,BTW BIG THANKS to Mike.B 4DRHTRD AT EPP for providing great quality PPE CATTED DP. Z
Congrats on passing the exam :D Another great year of driving is lining up ahead!
Quote from: SHOdded on October 01, 2015, 11:58:56 AM
Congrats on passing the exam :D Another great year of driving is lining up ahead!
Thanks -MANU,its like visiting your DR annually and dont know what to expect,but fortunately things went smooth,even with a cracked windshield. Z ;)
Indeed! Though it may be a warning of sorts if a cracked windshield is "acceptable", in that they are seeing this way too often! Maybe lighter isn't better in this instance.
I know the awd and engine hours can be added to the left side of the instrument cluster via IDS software,dealer programming,not sure if this was mentioned before but it will be pretty cool if a digital speedometer can be added,the one and only Jason would probably know. Z https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf (https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf)
Goes down smooth
A can o' obsession if I ever saw one!
Quote from: ZSHO on October 02, 2015, 11:16:19 AM
I know the awd and engine hours can be added to the left side of the instrument cluster via IDS software,dealer programming,not sure if this was mentioned before but it will be pretty cool if a digital speedometer can be added,the one and only Jason would probably know. Z https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf (https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf)
I would like to have the AWD display. The dealer can do that?
Quote from: BigPelo on October 03, 2015, 11:13:41 AM
Quote from: ZSHO on October 02, 2015, 11:16:19 AM
I know the awd and engine hours can be added to the left side of the instrument cluster via IDS software,dealer programming,not sure if this was mentioned before but it will be pretty cool if a digital speedometer can be added,the one and only Jason would probably know. Z https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf (https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf)
I would like to have the AWD display. The dealer can do that?
It definetly can be added though dealer programming,Jason site will give you an inside perspective. Z http://www.fordpimods.com/taurus-awd-engine-hours.html (http://www.fordpimods.com/taurus-awd-engine-hours.html)
Went by Ford dealer to get an oil change, told 2 hour wait. Said f it, did my first oil change on the SHO today at 25k miles. Penzoil Ultra Platinum 5w-30 and Motorcraft 500-S filter. Not too bad, sucks how low the car is even on rhino ramps.
Need new tires though, cords showing on the fronts. Going to put winters on this week.
Quote from: ZSHO on October 03, 2015, 01:40:39 PM
Quote from: BigPelo on October 03, 2015, 11:13:41 AM
Quote from: ZSHO on October 02, 2015, 11:16:19 AM
I know the awd and engine hours can be added to the left side of the instrument cluster via IDS software,dealer programming,not sure if this was mentioned before but it will be pretty cool if a digital speedometer can be added,the one and only Jason would probably know. Z https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf (https://www.fleet.ford.com/truckbbas/non-html/2013/P-011.pdf)
I would like to have the AWD display. The dealer can do that?
It definetly can be added though dealer programming,Jason site will give you an inside perspective. Z http://www.fordpimods.com/taurus-awd-engine-hours.html (http://www.fordpimods.com/taurus-awd-engine-hours.html)
(https://s-media-cache-ak0.pinimg.com/236x/03/1d/6d/031d6da1df83feb8117f1b01883bdcb5.jpg)
(https://38.media.tumblr.com/274010bd2aa82980fda41fc1d3918ad8/tumblr_myfk2erBKx1rkyz0ro1_500.gif)
DONE
I get those from my dealer as well - well not the "for sale" sign but the letter stating that they definitely want used cars...
I happened to be browsing on the UPR oil catch can unit here at ecopowerparts.com and personally to me this unit is a clear winner with a (direct) plug & play unit which provides a more easier and secure install without having to cut or modify any of the components or needing to purchase extra hardware like other brands,personally the UPR with the simplicity of a plug & play unit is in my books the clear and decisive choice for anyone looking for a quality oil catch can unit,figured let me just share my personal insight since many members have asked,thanks. Z www.ecopowerparts.com (http://www.ecopowerparts.com) http://www.ecopowerparts.com/shop/index.php?main_page=product_info&cPath=1&products_id=122 (http://www.ecopowerparts.com/shop/index.php?main_page=product_info&cPath=1&products_id=122)
I filled up my gas tank in N.J on Sunday at a Bp gas station and noticed today my tank has less than half a tank of gas in it with the same routine drive,also noticed a bit in decrease in performance,think the winter blend gas is upon us. Z
Think one of those sobriety devices can help us sniff out the ethanol %ages? :D
I just received a call from my Glass co and they stated my new oem (factory fresh) high performance windshield should be here this friday with an appt, (fingers crossed) Z :) :)
So, what tires should I be comparing? I have a dedicated winter setup, but I live in the mountains and can get snow in May/June/Sept, so I am thinking of going to the most high performance All Season so I can wear my 20"s from May to November.
Michelin Pilot Sport A/S 3 and Continental DWS 06 look to be the best?
Quote from: ZSHO on October 06, 2015, 11:09:30 AM
I just received a call from my Glass co and they stated my new oem (factory fresh) high performance windshield should be here this friday with an appt, (fingers crossed) Z :) :)
Let's hope this is it!!!
Keeping my fingers crossed for you Z... Hopefully this is the one!
Thanks -MANU and Tom, personally did not want to settle for an aftermarket glass,even after 3 months of waiting,will keep you updated,thanks Z
I just received a call again from my glass co and they just received my windshield and based on my vin # its indeed the correct one (FINALLY)which was recommended by my dealer,so everything looks great for friday morning,the only concern that i have is the procedure,they said it takes about an hour for the install but will take (four hours)drying time with a total of five hours,has anyone waited so long????. Z
Quote from: ZSHO on October 07, 2015, 03:41:30 PM
I just received a call again from my glass co and they just received my windshield and based on my vin # its indeed the correct one (FINALLY)which was recommended by my dealer,so everything looks great for friday morning,the only concern that i have is the procedure,they said it takes about an hour for the install but will take (four hours)drying time with a total of five hours,has anyone waited so long????. Z
They always ask me to keep it dry, taped in place, and keep a window partly open for 24 hours out here in AZ.
Some glass places want the adhesive to cure long enough that the glass won't get blown out by an air bag if you get in an accident since airbags are designed to work with the windshield in place. This mainly applies to the passenger air bag.
Quote from: 66 Galaxie on October 07, 2015, 10:24:09 PM
Some glass places want the adhesive to cure long enough that the glass won't get blown out by an air bag if you get in an accident since airbags are designed to work with the windshield in place. This mainly applies to the passenger air bag.
Thats what i figured,waiting four hrs to cure seemed an extensive long wait,guess whats waiting 4 hrs compared to 3 months for a piece of glass,thanks. Z
So i just bought a 48" tv and the box was 50 x 30x 5" and it fit in the trunk...i put my seats down then realized i could put them up...so the box fit in the trunk only....thats just rediculous
But more rediculous is my old crt 34 " sony high def is 196 lbs and this new thing is 28 lbs its laughable
Quote from: ajpturbo on October 09, 2015, 09:50:35 PM
So i just bought a 48" tv and the box was 50 x 30x 5" and it fit in the trunk...i put my seats down then realized i could put them up...so the box fit in the trunk only....thats just rediculous
But more rediculous is my old crt 34 " sony high def is 196 lbs and this new thing is 28 lbs its laughable
Look at your data logs on that big b*tch, so much easier to see....
Quote from: ZSHO on October 07, 2015, 03:41:30 PM
I just received a call again from my glass co and they just received my windshield and based on my vin # its indeed the correct one (FINALLY)which was recommended by my dealer,so everything looks great for friday morning,the only concern that i have is the procedure,they said it takes about an hour for the install but will take (four hours)drying time with a total of five hours,has anyone waited so long????. Z
Yes...and the glass that was just replaced on my Mack had to cure for 24 hours.
Sent from my VS985 4G using Tapatalk
Quote from: ajpturbo on October 09, 2015, 09:50:35 PM
So i just bought a 48" tv and the box was 50 x 30x 5" and it fit in the trunk...i put my seats down then realized i could put them up...so the box fit in the trunk only....thats just rediculous
But more rediculous is my old crt 34 " sony high def is 196 lbs and this new thing is 28 lbs its laughable
Got a 207lb 32" crt tv in the basement. Wife wants to get a monster for the living room and move the little 55" into the basement. I don't look forward to lugging a tv upstairs that weighs more than me.
Sent from my VS985 4G using Tapatalk
U cant even sell them old crt tvs lol...nobody wants them
Just threw out an old Sony 32" that weighed enough to crush someone.
Thing actually had a seat belt. Clicked into back of TV and to the stand...lol
Sent from my SM-N920V using Tapatalk
Quote from: brian.t.flynn.9 on October 09, 2015, 10:11:23 PM
Quote from: ajpturbo on October 09, 2015, 09:50:35 PM
So i just bought a 48" tv and the box was 50 x 30x 5" and it fit in the trunk...i put my seats down then realized i could put them up...so the box fit in the trunk only....thats just rediculous
But more rediculous is my old crt 34 " sony high def is 196 lbs and this new thing is 28 lbs its laughable
Got a 207lb 32" crt tv in the basement. Wife wants to get a monster for the living room and move the little 55" into the basement. I don't look forward to lugging a tv upstairs that weighs more than me.
Sent from my VS985 4G using Tapatalk
T.V are like battery's in this state,good luck hauling that big fat t,v to the recycle center.lol. Z
Yup...same here. Need a demo crew to get it upstairs!
Sent from my VS985 4G using Tapatalk
http://www.mustangandfords.com/featured-vehicles/1503-1986-ford-mustang-svo-2-0l-ecoboost/
Sent from my SM-N920V using Tapatalk
I think you might need to invest in a old fashioned (cherry picker)lol. Z ;) ;)
Sweet swap but they should've used a 2.3....
I had the same problem. Had a 36 inch Mitsubishi in the basement and I can't even remember the weight but that monster was heavy. Worked fine so I found someone to give it to as long as they picked it up. They were happy as they grunted up the stairs and I'm happy it's gone! Win/Win
Quote from: Larrylu on October 10, 2015, 09:44:05 AM
I had the same problem. Had a 36 inch Mitsubishi in the basement and I can't even remember the weight but that monster was heavy. Worked fine so I found someone to give it to as long as they picked it up. They were happy as they grunted up the stairs and I'm happy it's gone! Win/Win
Larry, I had the same issue except no one wanted mine. I ended up taking it apart and hauling it out in pieces. Even the picture tube was a heavy beast, though!
Yes Bruce I too found disposal can be expensive. After the concrete Mitsubishi, I bought a 50 inch rear projection Sony that started misbehaving after a few years. Sony accepted a big chunk of responsibility and gave me a large allowance toward a replacement 55 inch LCD. I had to dispose of the rear projection on my own though. I had to pay my trash hauling company $50 for a special trip and the set had to be curbside. At least it was not heavy. lol
Larry... I applaud your environmental responsibility.... I would have jus thown it in my dumpster and flattened it with a large sledgehammer.
Quote from: BiGMaC on October 10, 2015, 04:12:58 PM
Larry... I applaud your environmental responsibility.... I would have jus thown it in my dumpster and flattened it with a large sledgehammer.
Tom thanks for the compliment but I really don't deserve the mantle of responsibility. I did plenty of environmentally irresponsible things in my youth and I would guess that's probably my natural bent. After many years of marriage, my wife has had a slow and steady effect on my behavior.
My son at dinner last night didn't realise he used the Siracha infused catsup...thanks God I had my phone out!(http://images.tapatalk-cdn.com/15/10/11/c25fc5a6d2062a40085fafe772c1adec.jpg)(http://images.tapatalk-cdn.com/15/10/11/67bcb72a41712612b16e135d579c9e86.jpg)
Sent from my VS985 4G using Tapatalk
OUCH! He's not gonna come after us for hosting these pics, is he? :D
Quote from: SHOdded on October 11, 2015, 04:33:26 PM
OUCH! He's not gonna come after us for hosting these pics, is he? :D
Don't worry, we will just tell him you allowed it.....
;)
Eeeekkkkk!!!
Happy Columbus day everyone. Z :) :)
Thanks, Z! May it be a day full of cheer, everyone!
I some how happened to run into this video after some cold ones,intresting to see the Ford taurus representing Arabia or maybe Dubai,not sure exactly,hopefully you find the video somewhat unique in its own fashion. BTW there is a contact info available.lol Z https://www.youtube.com/watch?v=FYEr5jiPXng (https://www.youtube.com/watch?v=FYEr5jiPXng)
Interesting. Hopefully this doesn't mean there's a shortage of console parts over there!
I just wanted to update this article which i found on the 2015 Ford explorer having an issue with brake hoses,hope this helps someone out. Z October 3, 2015 — Ford Explorer Police Interceptor SUVs will get a closer look as the National Highway Traffic Safety Administration (NHTSA) expands its investigation into brake hose problems. The original investigation was opened in May 2015, after complaints about problems with the front brake jounce hoses that can cause a sudden loss of braking.
NHTSA opened the investigation with 10,000 of the model year 2015 Explorer SUVs involved, but that number has grown to 20,000. Full article can be found on this link. http://www.carcomplaints.com/news/2015/investigation-ford-explorer-police-interceptors.shtml (http://www.carcomplaints.com/news/2015/investigation-ford-explorer-police-interceptors.shtml)
Ooo, that's NOT good!
Quote from: SHOdded on October 11, 2015, 04:33:26 PM
OUCH! He's not gonna come after us for hosting these pics, is he? :D
Nope...I own the rights as well as his ass!
Sent from my VS985 4G using Tapatalk
I guess with old man winter around the corner was curious to know if the Motorcraft battery is maintenance free or if it requires adding water,this is directly from the manuel,hope this helps someone in NOT ADDING WATER to your existing MC battery. Z Your vehicle is equipped with a Motorcraft® maintenance-free battery
which normally does not require additional water during its life of
service.
Note: If your battery has a cover or a shield, make sure it is reinstalled
after the battery has been cleaned or replaced.
For longer, trouble-free operation, keep the top of the battery clean and
dry. Also, make certain the battery cables are always tightly fastened to
the battery terminals.
If you see any corrosion on the battery or terminals, remove the cables
from the terminals and clean with a wire brush. You can neutralize the
acid with a solution of baking soda and water.
It is recommended that the negative battery cable terminal be
disconnected from the battery if you plan to store your vehicle for an
extended period of time.
Interesting. Note the use of the word "normally" indicating there might be times when you might want to top it off. With the correct electrolytes (http://www.popularmechanics.com/cars/how-to/a2935/replacing-electrolyte-fluid-in-car-battery/) of course. Are the caps easily removable? If not, then definitely do not top up.
NOTE: Replacement is a better idea in the long run if the battery is problematic. Felt washers under the terminals and battery protector spray should be installed when the new battery is installed.
-MANU certainly agree and the caps are accessible friendly,just grab a small flat head screw driver and gently pry each corner of the caps section at a time,mine seemed pretty adequate compared to my original which needed about a large cup of distilled water before having to be replaced under warranty. Z
I would not recommend adding water to the battery due to the fact that water freezes in cold temps, which kills the battery cells thereafter.
Not quite as simole as that.
http://chemistry.stackexchange.com/questions/4610/what-is-the-freezing-point-of-sulfuric-battery-acid (http://chemistry.stackexchange.com/questions/4610/what-is-the-freezing-point-of-sulfuric-battery-acid)
Anyway, we are only referring to topping off, not replacing the entire contents. If we are to do a complete replacement, you are correct, we would need the appropriate electrolyte mix, not plain water.
Ford issues 129,000 vehicles for recalls,would make sure your not affected. Z http://www.autoblog.com/2015/10/28/ford-mustang-edge-lincoln-mkx-recall/ (http://www.autoblog.com/2015/10/28/ford-mustang-edge-lincoln-mkx-recall/) .Log into your account to be certain. Z https://owner.ford.com/tools/account/sign-in.html (https://owner.ford.com/tools/account/sign-in.html)
They are finally covering the 2009-10 Edge, after almost a year of arguing with them! Great news, hopefully they will have replacement tanks at the ready this time instead of impounding the vehicles that fail inspection.
Quote from: SHOdded on October 28, 2015, 06:11:41 PM
They are finally covering the 2009-10 Edge, after almost a year of arguing with them! Great news, hopefully they will have replacement tanks at the ready this time instead of impounding the vehicles that fail inspection.
Hopefully its a smooth resolution and keep us updated,(those darn salt trucks need a beat down) Z
Quote from: ZSHO on October 28, 2015, 10:16:21 PM
Hopefully its a smooth resolution and keep us updated,(those darn salt trucks need a beat down) Z
Luckily, my '07 passed inspection, but there are a lot of other owners who were not so lucky. I copied over your link to the Edge forum, and that will give them some comfort knowing their voices have been heard :) Yeah, salt trucks ...
I found a great price on Chevron fuel system cleaner on Amazon. Z http://www.amazon.com/gp/product/B00092893E?psc=1&redirect=true&ref_=ox_sc_sfl_title_4&smid=ATVPDKIKX0DER (http://www.amazon.com/gp/product/B00092893E?psc=1&redirect=true&ref_=ox_sc_sfl_title_4&smid=ATVPDKIKX0DER) Personally like to add a bottle to every oil change. Z
Have a happy and safe Halloween guys and gals,please slow down and watch out for our little trick or treaters roaming the neighborhoods,just think of it being a school zone day,thanks. Z
Enjoy All Hallow's Eve, ladies & gents! Stuff their baskets with candy AND dental floss (treat AND trick as it were :D) ...
Happy Halloween everyone
(http://images.tapatalk-cdn.com/15/10/31/16481f99e6d178b7c5efe032816b3d27.jpg)
(http://images.tapatalk-cdn.com/15/10/31/41a19b4d3ef8dd21041c51cbde994d4f.jpg)
(http://images.tapatalk-cdn.com/15/10/31/c8af60b251392faaaa4a9146db4c0294.jpg)
Sent from my SM-N920V using Tapatalk
Neat costumes!
Happy Halloween!
/
/
/
===========
((( / • • ))) ||
)))\_ - _/((( ||
(((.-/ = )))==[||}
| | | ||
|,. ./ ||
*=O= ||
/ ||
/ ||
|.._._._._..| /''''
|| || |/|/||
o> o>
Great imagery as always, BiGMaC!
I have always used Amsoil or Redline motor oil on my car,the past few oil changes switched over to Penzoil ultra and purchased two cases because of the lower sale price,recently had an appointment at the dealer and found a great on Penzoil platinum 5 quart jugs and ordered two,(link below)took five days to come,(out of stock)went to the dealer with the two 5 quart jugs and MC-fl500s oil filter to find out that 3 quarts were leftover from that one jug which was in the trunk,leading me to believe that the tech probably thought they were gallon jugs and put a total of 7 quarts all together,guess lesson learned if you do bring your own oil for the dealer to change MAKE SURE its a simple case of oil which has 6 EXACT quarts needed and makes life easier for everyone,lesson learned. Z http://www.amazon.com/gp/product/B00ELHNM3K?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 (http://www.amazon.com/gp/product/B00ELHNM3K?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00) Luckily have my topsider oil extractor which does come in handy in sutuations like these. Z http://www.amazon.com/gp/product/B001445IZ8?psc=1&redirect=true&ref_=oh_aui_search_detailpage (http://www.amazon.com/gp/product/B001445IZ8?psc=1&redirect=true&ref_=oh_aui_search_detailpage)
Good you were able to rectify their error in short order. Could've been really bad for seals!
Are these the oils you are using, Z? Noack on Platinum doesn't seem as good as the Ultra?
Quote from: SHOdded on November 01, 2015, 07:54:12 AM
Good you were able to rectify their error in short order. Could've been really bad for seals!
Are these the oils you are using, Z? Noack on Platinum doesn't seem as good as the Ultra?
I have used the ultra on a few occassions,just needed something cheap to to use for a couple hunded miles and change it again,like to do that once in a while(ocd in me)BTW have an appt for the steering wheel and to put the (case)of ultra back in,thanks. Z
Great idea, esp with winter nearly upon us! Looking forward to pics of the new wheel in place :)
Quote from: SHOdded on November 01, 2015, 08:25:14 AM
Great idea, esp with winter nearly upon us! Looking forward to pics of the new wheel in place :)
Oh yeah.pics are a must. Z :camera_icon:
I guess with all the discussions about the importance of changing out PTU,RDU,Trans fluid we also sometimes neglect the notability of changing another key component which has to do with brake fluid,after reading this link below grabbed my wifes brand new clear turkey baster and sucked some brake fluid out of the reservoir,at 33k the fluid seemed to have a dark golden color compared to the quart of Motorcraft Dot 4 which had a light golden texture,might want to change your brake fluid especially after or preferably before changing your pads or rotors out,just a thought. Z http://www.aa1car.com/library/bfluid.htm (http://www.aa1car.com/library/bfluid.htm) Ford, for a time, recommended fresh fluid every 36,000 miles or three years, and to replace the fluid each time the brake pads are changed. Maybe the stopping power may improve after changing the fluid which in time water builds up in the system especially humid areas. Z
Good reminder. Have not discussed the relative merits/demerits of the various DOT4 offerings out there either :)
I was checking the difference between a 13 & 15 SHO Purge valve,think as of 11/14 they started making an updated purge valve,check out the difference in prices below. Z FORD 2015 TAURUS 3.5L V6 Turbocharged Emission Vapor Canister
Price
MOTORCRAFT CX2512 {#AG1Z9D653C} Info
Canister, Bracket & Shield; Excludes California & Green State Requirements
$49.79
Add Part
MOTORCRAFT CX2492 {#AG1Z9D653B} Info
To 11/30/14; Canister, Bracket & Shield; Excludes California & Green State Requirements (Only 2 Remaining)
Part ImageNext Image
$106.79
Add Part
This is what I get from fordpartsgiant.com. I think they just dropped the price, maybe?
Part No. CX-2492
Part Description CANNISTER - FUEL VAPOUR STORE
Replaced By AG1Z-9D653-C
Manufacturer Ford. This genuine Ford part is guaranteed by Ford's factory warranty.
Your Price: $56.45
Retail Price: $86.98
You Save: $30.53
Part No. CX-2512
Part Description CANNISTER - FUEL VAPOUR STORE
Manufacturer Ford. This genuine Ford part is guaranteed by Ford's factory warranty.
Your Price: $56.45
Retail Price: $86.98
You Save: $30.53
But on Rockauto, see the same price difference as you did. Could be the CX2492 has a bracket with it?
I am not sure if anyone else is getting tired and fustrated since they implemented these red light & speed cameras every mile or so,this is my 4th one this year,my recent one was for 100.00. Guess might have to limit wot. Z :minigunner:
Yeah, they are very prevalent in DC, and now in MD (Montgomery County esp) as well. School buses have their counterparts mounted to them also. Have to think twice at every light, will likely get rearended one of these days, having good brakes on the Edge, and many folks NOT taking care of their vehicles like they should ...
The SHO went into the Honda dealer where I bought it for warranty work.
They're Replacing both front lower control arms and control arm mounts/bushings.
This is the loaner car they gave me ...lol
(http://images.tapatalk-cdn.com/15/11/04/6bf05adf00255de679a32ed5ed3bca34.jpg)
2015 Honda Odyssey minivan.... Guess it's better than walking home.
Just a little bit different from the SHO.
Well at least there are two good things. Its not a yugo and you can still haul plenty of ass in your borrowed ride. Hope you get your side back soon.
Should be done by the end of the day if all goes well
Time to haul some mulch & firewood! :D All I care about is having that builtin vacuum cleaner in the back.
That minivan would of came in real handy in the Spring loading up a big pile of horse manure for the crops,would of been tough explaining the smell though. Z :post-204-1185657958:
Quote from: ZSHO on November 04, 2015, 07:18:59 PM
That minivan would of came in real handy in the Spring loading up a big pile of horse manure for the crops,would of been tough explaining the smell though. Z
LOL
Got her back. Ride is soooo much smoother/quieter
I guess the right rear shock was leaking also but wasn't covered under the extended warranty. Looks like I'm in the market for some new rear shocks. (http://images.tapatalk-cdn.com/15/11/04/d258b3c8a51b43b0423444121b4d61c7.jpg)
Hopefully the shocks won't be much of a challenge! Usually the major hurdle is builtup rust :)
I found some helpful updated videos that many of you might find useful. Z https://www.youtube.com/watch?v=aFateW5KGAI (https://www.youtube.com/watch?v=aFateW5KGAI) https://www.youtube.com/watch?v=nni4miagmps (https://www.youtube.com/watch?v=nni4miagmps) https://www.youtube.com/watch?v=atv1Jew9mWg (https://www.youtube.com/watch?v=atv1Jew9mWg)
Bronzie had to trip to the dealership this week for a P0020 DTC.
They replaced the VCT solenoid and the pigtail. When the car was built, they used tape for strain relief but instead of using a loop, they decided to pull the wires tight then taped it which ended up ruining it.
:Picard2:
They also replaced a leaking battery and did the hub TSB on both axles.
Quote from: FoMoCoSHO on November 14, 2015, 12:16:39 PM
Bronzie had to trip to the dealership this week for a P0020 DTC.
They replaced the VCT solenoid and the pigtail. When the car was built, they used tape for strain relief but instead of using a loop, they decided to pull the wires tight then taped it which ended up ruining it.
:Picard2:
They also replaced a leaking battery and did the hub TSB on both axles.
Hopefully its a permanent fix in all aspects. Z
Quote from: ZSHO on November 14, 2015, 12:44:02 PM
Quote from: FoMoCoSHO on November 14, 2015, 12:16:39 PM
Bronzie had to trip to the dealership this week for a P0020 DTC.
They replaced the VCT solenoid and the pigtail. When the car was built, they used tape for strain relief but instead of using a loop, they decided to pull the wires tight then taped it which ended up ruining it.
:Picard2:
They also replaced a leaking battery and did the hub TSB on both axles.
Hopefully its a permanent fix in all aspects. Z
When the code was present commanded VCT and VCT duty cycle stopped functioning. Data is present again so I think we're good.
I tried to correct the problem with the relief when I found it and it got me a week. The damage had already been done though.
I hope the hub TSB works because the pop ting started after her first track outing. Won't know till next year how well it holds up I guess.
Quote from: FoMoCoSHO on November 14, 2015, 12:56:17 PM
Quote from: ZSHO on November 14, 2015, 12:44:02 PM
Quote from: FoMoCoSHO on November 14, 2015, 12:16:39 PM
Bronzie had to trip to the dealership this week for a P0020 DTC.
They replaced the VCT solenoid and the pigtail. When the car was built, they used tape for strain relief but instead of using a loop, they decided to pull the wires tight then taped it which ended up ruining it.
:Picard2:
They also replaced a leaking battery and did the hub TSB on both axles.
Hopefully its a permanent fix in all aspects. Z
When the code was present commanded VCT and VCT duty cycle stopped functioning. Data is present again so I think we're good.
I tried to correct the problem with the relief when I found it and it got me a week. The damage had already been done though.
I hope the hub TSB works because the pop ting started after her first track outing. Won't know till next year how well it holds up I guess.
I guess a leaking/low battery is certainly not a good thing and sometimes can make an existing situation worse,its like adding fuel to the fire,also do you know if they replaced the thrust washers. Z
Quote from: ZSHO on November 14, 2015, 01:03:48 PM
Quote from: FoMoCoSHO on November 14, 2015, 12:56:17 PM
Quote from: ZSHO on November 14, 2015, 12:44:02 PM
Quote from: FoMoCoSHO on November 14, 2015, 12:16:39 PM
Bronzie had to trip to the dealership this week for a P0020 DTC.
They replaced the VCT solenoid and the pigtail. When the car was built, they used tape for strain relief but instead of using a loop, they decided to pull the wires tight then taped it which ended up ruining it.
:Picard2:
They also replaced a leaking battery and did the hub TSB on both axles.
Hopefully its a permanent fix in all aspects. Z
When the code was present commanded VCT and VCT duty cycle stopped functioning. Data is present again so I think we're good.
I tried to correct the problem with the relief when I found it and it got me a week. The damage had already been done though.
I hope the hub TSB works because the pop ting started after her first track outing. Won't know till next year how well it holds up I guess.
I guess a leaking/low battery is certainly not a good thing and sometimes can make an existing situation worse,its like adding fuel to the fire,also do you know if they replaced the thrust washers. Z
They did replace the thrust washers.
Hope to continue hearing good news on the Bronzie front!
Quote from: SHOdded on November 14, 2015, 04:04:11 PM
Hope to continue hearing good news on the Bronzie front!
Thanks for her new name!
Glad you like it :D
I saw these on the Ford site with a price match guarantee,great overall tire which includes install/high speed forced balancing for lifetime. Z https://owner.ford.com/maintenance/tire-finder/search-results.html#/Tire/9OO2%2015500190000
Link didn't work Z....
Quote from: FoMoCoSHO on November 14, 2015, 05:14:27 PM
Link didn't work Z....
Sorry about that,Ford site is not to reliable. Z
Is this for the DWS06, Z? FoMoCo, enter the zip code, then select the dealer to get to the results page.
Quote from: SHOdded on November 14, 2015, 05:44:25 PM
Is this for the DWS06, Z? FoMoCo, enter the zip code, then select the dealer to get to the results page.
Yes sir,think they were for 253.00 ea Z
It was showing me ... gulp ... $300 per at my local dealer :( others were $253 though!
Try calling Radial Tire in Silver Spring. They used to have good deals when I lived in the VA/DC/MD area years ago ('95-'05).
after having 3 revisions of a E20 tune performed, switching back to the canned 91 tune sucks! I can't believe how much of a difference the E makes.
I have a road trip coming up for Thanksgiving so I have to switch back to 91. I'm going to try to get a log or 2 with the 91 + ACES to give to Torrie before I head out next week.
Looking forward to updates! Have you been able to contact Brian at BND recently?
Quote from: 92BlackGT on November 18, 2015, 06:01:24 AM
after having 3 revisions of a E20 tune performed, switching back to the canned 91 tune sucks! I can't believe how much of a difference the E makes.
I have a road trip coming up for Thanksgiving so I have to switch back to 91. I'm going to try to get a log or 2 with the 91 + ACES to give to Torrie before I head out next week.
Very interested in this as I ran a 50/50 mix in my Mazda DISI, night and day to say the least. If the fuel system can keep up, or if 20% is enough to keep KR away you can likely move to 87 and save a few bucks, with 50/50 that is what I did and from what I was told I didn't need anywhere near that much E, its just easier and cost less to mix it that way. I'm also interested in combining this with meth though it may be pointless, something to discuss with Torrie.
My random thought of the day: If Anonymous brought down nearly four thousand ISIS twitter accounts were the terrorists correct in saying they were going to get F&@%ed by a bunch of virgins?
Wouldn't half&half 87E10 + E85 net you E48/96 octane fuel, Scott? Are fuel systems on the Mazda rated to handle this/E85, because on the SHO, the max official rating I have seen so far is E20 (E15 for 2010-12 I think). I know FoMoCo has run E25 in his 2013.
Quote from: SHOdded on November 18, 2015, 08:37:32 AM
Looking forward to updates! Have you been able to contact Brian at BND recently?
I haven't. When I called to order a gallon of ACES a month ago, I left a message to order it. It took a few days before he put the order in but I wasn't in a hurry.
Quote from: SHOdded on November 18, 2015, 01:12:23 PM
Wouldn't half&half 87E10 + E85 net you E48/96 octane fuel, Scott? Are fuel systems on the Mazda rated to handle this/E85, because on the SHO, the max official rating I have seen so far is E20 (E15 for 2010-12 I think). I know FoMoCo has run E25 in his 2013.
Yeah not an issue as far as flow is concerned with the DISI, we could run 100% up to a particular HP level, after that we needed 5th and 6th port. Our issue was with the gunk that would build up in the pump during cool down. Just as the EB, it was cam driven and lubricated by engine oil, it was not perfect and some oil and fuel would mix in the pump. When you shut off the engine that pump was very hot and would boil off the fuel in it, but when it was E85 and oil, it would boil off and leave a sticky black residue in the pump that would build up over time and we started losing fuel pressure because the plunger would not move freely. 50/50 mix had enough gas in it to keep it clean, anything more would start this build up. In the case of the EB it seems to be a flow issue that limits how much E we can use. E and Meth are both fuel and have a cooling effect, I would imagine 20%E with Meth would do well in the EB, we never really did that in the DISI with the stock turbo because 30-50% E ran through fine and was enough fuel "and air" to get the max performance out of the stock turbo. I'm sure some of the upgrade turbo guys ran both E and Meth, but I never researched it much.
I'm very curious if Torrie has tuned a car with both a "splash of E" and Meth. I'm not sure the E would be needed, i would think you can get all the cooling, fuel and the associated benefits of advanced timing, increased boost and still hold off KR with just the Meth. I'm not so sure 20% E would be enough to get the same performance as Meth only. I guess most shave about .5-.6 off their quarter mile time with Meth so maybe a guy running E can share their experience. Some dyno numbers would be nice too.
I noticed this morning that the Sirius travel link free trial is (active),it will be cool and surely helpful if it lasts through the Thanks giving day weekend,enjoy. Z :)
Quote from: ZSHO on November 19, 2015, 08:56:52 AM
I noticed this morning that the Sirius travel link free trial is (active),it will be cool and surely helpful if it lasts through the Thanks giving day weekend,enjoy. Z :)
They activate it on pre-owned purchases now as well, so mine has been on a couple weeks. It is cool, but I find that the Waze app is much better for traffic and turn by turn. I'm also a Weather junkie so I have a lot of nice apps that are much more detailed then the options on Sirius travel link. Is there anything in there worth using? I just played for a few minutes with it. I had the free Sirius/XM radio several times in new cars and it always sounded like crap so I never used it or payed for it, can't believe how low quality the audio is. Not sure now they make money with things like Pandora. I guess for sports it would be OK, but I can get much of that from apps and from my dishanywhere app.
Thanks,
Scott
Quote from: Scott4957 on November 19, 2015, 09:27:30 AM
Quote from: ZSHO on November 19, 2015, 08:56:52 AM
I noticed this morning that the Sirius travel link free trial is (active),it will be cool and surely helpful if it lasts through the Thanks giving day weekend,enjoy. Z :)
They activate it on pre-owned purchases now as well, so mine has been on a couple weeks. It is cool, but I find that the Waze app is much better for traffic and turn by turn. I'm also a Weather junkie so I have a lot of nice apps that are much more detailed then the options on Sirius travel link. Is there anything in there worth using? I just played for a few minutes with it. I had the free Sirius/XM radio several times in new cars and it always sounded like crap so I never used it or payed for it, can't believe how low quality the audio is. Not sure now they make money with things like Pandora. I guess for sports it would be OK, but I can get much of that from apps and from my dishanywhere app.
Thanks,
Scott
I find the audio on the SHO subpar and unacceptable,do find the AM to be somewhat adequate in HD,find the Navigation truly superior,not sure if its due to my new A-6 card and new update,but truly makes up for the areas that its lacking,honestly if you think your audio is low quality then you havent heard the SHO which sounds like pure garbage. Z
Yeah the audio quality of XM is directly related to the service, not the equipment in the car, sounds like crap no matter what car I have had. I have the THXII 15 speakers 700w in the MKS and it sounds amazing. Its the first car I have had with the HD radio which I really like. In order of quality its XM, then regular FM, and then HD radio/CD or Pandora.
Tons of stations with very little bandwidth and massive compression = Crap.
I recently had my local friendly Dealer perform the RDU flush over a month ago and most recently had the trans fluid flush performed,in both cases they needed to be flushed twice at roughly 32-33k on her with the trans fluid flush covered under warranty and the RDU was performed as a courtesy,today received an update in regards to having the PTU performed on my PP SHO which is somewhat a pita,my dealer quoted me 400.00 which will also take roughly 3hrs to perform,but as a (courtesy)for such a wonderful loyal customer they will charge me 150.00 if i bring my own fluid,have an appt at the end of the month and will update you on any findings or possibly some pics to follow,hope this helps anyone considering this procedure. Z
Quote from: ZSHO on November 20, 2015, 11:34:56 AM
I recently had my local friendly Dealer perform the RDU flush over a month ago and most recently had the trans fluid flush performed,in both cases they needed to be flushed twice at roughly 32-33k on her with the trans fluid flush covered under warranty and the RDU was performed as a courtesy,today received an update in regards to having the PTU performed on my PP SHO which is somewhat a pita,my dealer quoted me 400.00 which will also take roughly 3hrs to perform,but as a (courtesy)for such a wonderful loyal customer they will charge me 150.00 if i bring my own fluid,have an appt at the end of the month and will update you on any findings or possibly some pics to follow,hope this helps anyone considering this procedure. Z
Nice, how did you get them to do the trans flush under warranty? Where you having an issue, or did you just ask? Nice of them to do the RDU as well, and for 150 I would have them do the PTU no question about it. I would like to get all of these done prior to getting too heavy into the mods. What was the result? Were any of them really bad?
Thanks for sharing,
Scott
Quote from: Scott4957 on November 20, 2015, 11:40:48 AM
Quote from: ZSHO on November 20, 2015, 11:34:56 AM
I recently had my local friendly Dealer perform the RDU flush over a month ago and most recently had the trans fluid flush performed,in both cases they needed to be flushed twice at roughly 32-33k on her with the trans fluid flush covered under warranty and the RDU was performed as a courtesy,today received an update in regards to having the PTU performed on my PP SHO which is somewhat a pita,my dealer quoted me 400.00 which will also take roughly 3hrs to perform,but as a (courtesy)for such a wonderful loyal customer they will charge me 150.00 if i bring my own fluid,have an appt at the end of the month and will update you on any findings or possibly some pics to follow,hope this helps anyone considering this procedure. Z
Nice, how did you get them to do the trans flush under warranty? Where you having an issue, or did you just ask? Nice of them to do the RDU as well, and for 150 I would have them do the PTU no question about it. I would like to get all of these done prior to getting too heavy into the mods. What was the result? Were any of them really bad?
TheyThanks for sharing,
Scott
They found the flange seal to be leaking,as mentioned above both units needed to be flushed twice at roughly 32k. Z
Oooooooooo, fun times ahead!
I just had the PTU flush performed at my local dealer and in fact it certainly needed it at 33k,the fluid was black and needed to be flushed out a couple times slowely and the procedure took roughly two hours to have done,he also found a leak on one of the DP and fixed that issue,the only downside was that only Mobil one 75w-140 was only available in such short notice,pic's below as promised and BTW pic of the ptu temp sensor below. Z
Honestly Z, the fluid being black doesn't necessarily mean the fluid is bad. Fluid analysis is the only real way to know. The company BND Brian uses has this service. I forget their name,but I've got an oil sample ready to ship and they will do my PTU fluid in the spring when I swap it out.
ALS Tribology
Great pics, Z. It's nice to be running fresh fluid for sure, even if the old stuff is not down to the last 0.000001%. This will give us a chance to see how the Mobil1 performs! Glad they caught the leak with the DPs also. So that is the PTU temp sensor?
Quote from: ZSHO on November 21, 2015, 01:55:46 PM
I just had the PTU flush performed at my local dealer and in fact it certainly needed it at 33k,the fluid was black and needed to be flushed out a couple times slowely and the procedure took roughly two hours to have done,he also found a leak on one of the DP and fixed that issue,the only downside was that only Mobil one 75w-140 was only available in such short notice,pic's below as promised and BTW pic of the temp head sensor below. Z
You got a good deal on doing all that maintainance. Btw, Is that a factory DP, I thought you rocked high flow cats?
Quote from: FoMoCoSHO on November 21, 2015, 02:03:54 PM
Honestly Z, the fluid being black doesn't necessarily mean the fluid is bad. Fluid analysis is the only real way to know. The company BND Brian uses has this service. I forget their name,but I've got an oil sample ready to ship and they will do my PTU fluid in the spring when I swap it out.
I certainly agree with you and surely cannot distinquish the oil by its color but certainly can tell by the gunk buildup on the bolt that the flush was indeed warranted. Z
Quote from: CroR1 on November 21, 2015, 03:05:06 PM
Quote from: ZSHO on November 21, 2015, 01:55:46 PM
I just had the PTU flush performed at my local dealer and in fact it certainly needed it at 33k,the fluid was black and needed to be flushed out a couple times slowely and the procedure took roughly two hours to have done,he also found a leak on one of the DP and fixed that issue,the only downside was that only Mobil one 75w-140 was only available in such short notice,pic's below as promised and BTW pic of the temp head sensor below. Z
You got a good deal on doing all that maintainance. Btw, Is that a factory DP, I thought you rocked high flow cats?
My factory DP have been stored away since 3k,the rest is on my sig. Z
Quote from: ZSHO on November 21, 2015, 03:44:48 PM
Quote from: CroR1 on November 21, 2015, 03:05:06 PM
Quote from: ZSHO on November 21, 2015, 01:55:46 PM
I just had the PTU flush performed at my local dealer and in fact it certainly needed it at 33k,the fluid was black and needed to be flushed out a couple times slowely and the procedure took roughly two hours to have done,he also found a leak on one of the DP and fixed that issue,the only downside was that only Mobil one 75w-140 was only available in such short notice,pic's below as promised and BTW pic of the temp head sensor below. Z
You got a good deal on doing all that maintainance. Btw, Is that a factory DP, I thought you
rocked high flow cats?
My factory DP have been stored away since 3k,the rest is on my sig. Z
I guess all pipes are alike lol. The aftermarket do look sweet.
Quote from: SHOdded on November 21, 2015, 03:02:10 PM
Great pics, Z. It's nice to be running fresh fluid for sure, even if the old stuff is not down to the last 0.000001%. This will give us a chance to see how the Mobil1 performs! Glad they caught the leak with the DPs also. So that is the PTU temp sensor?
Correct and thank you. Z
Horsepower converter/calculator
http://www.mk5cortinaestate.co.uk/calculator4.php (http://www.mk5cortinaestate.co.uk/calculator4.php)
Enjoy!
Quote from: ZSHO on November 21, 2015, 01:55:46 PM
I just had the PTU flush performed at my local dealer and in fact it certainly needed it at 33k,the fluid was black and needed to be flushed out a couple times slowely and the procedure took roughly two hours to have done,he also found a leak on one of the DP and fixed that issue,the only downside was that only Mobil one 75w-140 was only available in such short notice,pic's below as promised and BTW pic of the ptu temp sensor below. Z
You sir, have a great dealer!!!
I need to come visit I think...lol
What was the cause of the leak on the downpipes by the way?
Sent from my SM-N920V using Tapatalk
Quote from: SHOnUup on November 21, 2015, 06:34:38 PM
Quote from: ZSHO on November 21, 2015, 01:55:46 PM
I just had the PTU flush performed at my local dealer and in fact it certainly needed it at 33k,the fluid was black and needed to be flushed out a couple times slowely and the procedure took roughly two hours to have done,he also found a leak on one of the DP and fixed that issue,the only downside was that only Mobil one 75w-140 was only available in such short notice,pic's below as promised and BTW pic of the ptu temp sensor below. Z
You sir, have a great dealer!!!
I need to come visit I think...lol
What was the cause of the leak on the downpipes by the way?
Sent from my SM-N920V using Tapatalk
Any time buddy,the tech's a buddy of mine which has a new Shelby and is a Stang freak,also one of the gaskets were surprisingly leaking,thanks. Z
I think I have a leaky gasket too...I've tried to get some soapy water up there to see, just too hard of an area to see all angles.
Sent from my SM-N920V using Tapatalk
Quote from: SHOnUup on November 21, 2015, 07:04:02 PM
I think I have a leaky gasket too...I've tried to get some soapy water up there to see, just too hard of an area to see all angles.
Sent from my SM-N920V using Tapatalk
Did you install new gaskets X4 ? Or do you think there possibly loose,might need to re-torque those bolts up,here's a pic of mine up top,try to zoom in. Z
Didn't do the 4x deal...I've checked the bolts countless times also. Thinking I need to try the 4 to be honest.
Sent from my SM-N920V using Tapatalk
Quote from: SHOnUup on November 21, 2015, 07:23:45 PM
Didn't do the 4x deal...I've checked the bolts countless times also. Thinking I need to try the 4 to be honest.
Sent from my SM-N920V using Tapatalk
I honestly purchased only two of them back then and found the (original)gasket leaking today,BTW any condensation by the flange??Floor area?
None, that I can see...but I can only see 50-60% of the area. I swear it sounds like a leak, since the day I put them on...
Sent from my SM-N920V using Tapatalk
Quote from: SHOnUup on November 21, 2015, 07:35:42 PM
None, that I can see...but I can only see 50-60% of the area. I swear it sounds like a leak, since the day I put them on...
Sent from my SM-N920V using Tapatalk
I dont think its affecting any performance based on your outstanding 1/4 runs,Any signs of a rough idle?
No rough idle, but it has a sound of air coming from the exaust system I swear.
Weird thing is...I ran a 12.42 with just a 3bar tune on stock everything else.
Added all the other goodies, in the range of 4k cost...gained less than a tenth?
Weird it is
Sent from my SM-N920V using Tapatalk
Quote from: SHOnUup on November 21, 2015, 07:48:07 PM
No rough idle, but it has a sound of air coming from the exaust system I swear.
Weird thing is...I ran a 12.42 with just a 3bar tune on stock everything else.
Added all the other goodies, in the range of 4k cost...gained less than a tenth?
Weird it is
Sent from my SM-N920V using Tapatalk
Its a tough call,sometimes these DP need double gaskets depending on exact fitment and so on,need to grab some grub. Z
.--.
{ / q {
{ ' (-(~'
{ '.{' )
{ ' - { ' .-""""""-.
{ . _ { '.' / '.)
{ _. { . {' ]
{._ { '{ ;'-=-. ]
{ -. { . ' { ';-=-.' /
{ ._. {.; '-=- .'
{_.-' ''.__ _,-'
[ ][ ]'
.='=,
HAPPY THANKSGIVING
Quote from: BiGMaC on November 25, 2015, 05:37:24 PM
.--.
{ / q {
{ ' (-(~'
{ '.{' )
{ ' - { ' .-""""""-.
{ . _ { '.' / '.)
{ _. { . {' ]
{._ { '{ ;'-=-. ]
{ -. { . ' { ';-=-.' /
{ ._. {.; '-=- .'
{_.-' ''.__ _,-'
[ ][ ]'
.='=,
HAPPY THANKSGIVING
Tom wishing you and your family a happy healthy blessed Thanksgiving. Z
Good food & Safe travels everyone!!!
Back at ya fellas!!!
Sent from my SM-N920V using Tapatalk
And I'm beginning to be thankful for the new 5.2
Little video to support that...poor little Z28
https://www.youtube.com/watch?v=vtdtGgf1BF0
Sent from my SM-N920V using Tapatalk
X2 Buddy,Happy Thanksgiving to all of you and yours. Z
Quote from: SHOnUup on November 25, 2015, 10:19:59 PM
And I'm beginning to be thankful for the new 5.2
Little video to support that...poor little Z28
https://www.youtube.com/watch?v=vtdtGgf1BF0
Sent from my SM-N920V using Tapatalk
Great video! You can get $25k off of a Z28 tomorrow though (Black Friday!) That might be worth it!
for the price of both of those, I would rather buy a new/slightly used 2016 z06, for just a slightly more.
Not running an e85 mix sucks! My tailpipe tips are black!
I guess with old man winter right around the corner found a suitable alternate Heavy duty Battery which might be something to consider knowing the Motorcraft Battery in many cases having a short life span. Z http://mediacdn.shopatron.com/media/mfg/15710/spec_file/246444756.pdf (http://mediacdn.shopatron.com/media/mfg/15710/spec_file/246444756.pdf)
The old man became unresponsive in front of me and thought we lost him,currently still in the ECU since yesterday. Z
I wish him all the best and fast recovery Z.
I found a great article on the variation of oils and might find it beneficial in many aspects. Z http://www.hendonpub.com/resources/article_archive/results/details?id=1378 (http://www.hendonpub.com/resources/article_archive/results/details?id=1378)
Z, how is your Dad?
Quote from: FoMoCoSHO on December 10, 2015, 01:42:11 PM
Z, how is your Dad?
Not quite sure at the moment,just trying to focus and get my head together and in standby mode,thanks. Z
i got the wifey to fall in love with a Flex ecoboost. She hated them and wanted an Exploder Sport but we found a Deep Impact Blue '14 Flex with the 4 sun roofs to test drive. She fell in love and likes the room in the Flex compared to the Explorer. The dealer has it listed at $36,900 with 33k miles. They have had it on the lot for over 3 months and seem willing to deal. They gave an offer of $33,800. I'm thinking I could get them to drop it at least 2k more.
What do you think is a good price for one?
listen to your wife and get a used explorer sport, 2013/14 with low miles for about the same amount.
Quote from: CroR1 on December 12, 2015, 10:33:23 PM
listen to your wife and get a used explorer sport, 2013/14 with low miles for about the same amount.
I like the Flex so much more. It's so much bigger and more comfortable, rides so much better. Also, it's a lot more unique... Explorers are everywhere
We looked at both and went with the Flex for the extra space especially the 2nd row leg room, and smoother ride. The Explorer is so much smaller inside it almost makes you feel claustrophobic compared to the Flex. Also if he Flex with th Ecoboost is a phenomenal sleeper. ;-)
The other day upon starting my car in the morning noticed that the car charger was left on overnight and didnt think nothing of it,after coming back home and shutting off the car noticed this on my screen and the dealer checked the battery level and it was just fine,think the car protects itself,also found this on the owners manuel related to this. Z Turn Power Off to
Save Battery
Displayed when the battery management
system determines that:
• the battery is at a low state of charge or,
• the ignition has been in accessory position
or on position with the engine off for
approximately 45 minutes.
Turn the ignition off as soon as possible to
protect the battery. This message will clear
once the vehicle has been started and the
battery state of charge has recovered. Turning
off unnecessary electrical loads will allow
faster battery state-of-charge recovery
Just wanted to say that my forum name is one that I used when I first started posting on forums back in 2008 when I bought my Civic and turbo kit from All Japanese performance or also know as AJP or All Jap cars.
After having every exhaust component crack and fail at some point or another. I just wanted to say how much of a piece of s*** those people in Florida are...They were a small time company speed shop. That failed and now I can't reach them anymore...I paid out of pocket to fix the Downpipe when it cracked. I paid to fix the dump tube when it broke off. I took off and re installed the turbo manifold when it cracked....Now the entire wastegate pipe broke off and I have to take the turbo down again.
I bought this kit because it had a lifetime warranty on the manifold and was a tubular design. Which is what usually separates the good kits from the cheap one...Bottom line is they were the wrong people to buy the kit from .....So I've been duped....They have benefited from using my videos and quotes about their kit which is fine. But they have never taken care of me. And I shouldn't be surprised now. They have no integrity and are a bunch of weasels...Including David the internet sales person and owner Ron Neemar. I'd take it out of their asses if I had the opportunity to meet them. One way or another I would get satisfaction...They have ripped people off before. Hopefully not anymore though since it appears they are out of business. There phones have been shut off and they won't return my emails.
Lesson learned. Do business with bigger companies that have a track record....Small time faggots piss me the f**k off.
New recalls[/b] today,hopefully we are spared. Z http://www.thecarconnection.com/news/1101535_ford-recalls-317000-u-s-vehicles-ford-f-150-supercrew-ford-crown-victoria-mercury-grand-marquis (http://www.thecarconnection.com/news/1101535_ford-recalls-317000-u-s-vehicles-ford-f-150-supercrew-ford-crown-victoria-mercury-grand-marquis)
Well, I would hope it's a recall that pssst people-in-the-know actually want!!!
Quote from: ajpturbo on December 22, 2015, 04:30:45 PM
Just wanted to say that my forum name is one that I used when I first started posting on forums back in 2008 when I bought my Civic and turbo kit from All Japanese performance or also know as AJP or All Jap cars.
After having every exhaust component crack and fail at some point or another. I just wanted to say how much of a piece of s*** those people in Florida are...They were a small time company speed shop. That failed and now I can't reach them anymore...I paid out of pocket to fix the Downpipe when it cracked. I paid to fix the dump tube when it broke off. I took off and re installed the turbo manifold when it cracked....Now the entire wastegate pipe broke off and I have to take the turbo down again.
I bought this kit because it had a lifetime warranty on the manifold and was a tubular design. Which is what usually separates the good kits from the cheap one...Bottom line is they were the wrong people to buy the kit from .....So I've been duped....They have benefited from using my videos and quotes about their kit which is fine. But they have never taken care of me. And I shouldn't be surprised now. They have no integrity and are a bunch of weasels...Including David the internet sales person and owner Ron Neemar. I'd take it out of their asses if I had the opportunity to meet them. One way or another I would get satisfaction...They have ripped people off before. Hopefully not anymore though since it appears they are out of business. There phones have been shut off and they won't return my emails.
Lesson learned. Do business with bigger companies that have a track record....Small time faggots piss me the f**k off.
I think there balls need to be hung to dry,lesson learned indeed. Z
Quote from: ZSHO on December 22, 2015, 07:34:54 PM
Quote from: ajpturbo on December 22, 2015, 04:30:45 PM
Just wanted to say that my forum name is one that I used when I first started posting on forums back in 2008 when I bought my Civic and turbo kit from All Japanese performance or also know as AJP or All Jap cars.
After having every exhaust component crack and fail at some point or another. I just wanted to say how much of a piece of s*** those people in Florida are...They were a small time company speed shop. That failed and now I can't reach them anymore...I paid out of pocket to fix the Downpipe when it cracked. I paid to fix the dump tube when it broke off. I took off and re installed the turbo manifold when it cracked....Now the entire wastegate pipe broke off and I have to take the turbo down again.
I bought this kit because it had a lifetime warranty on the manifold and was a tubular design. Which is what usually separates the good kits from the cheap one...Bottom line is they were the wrong people to buy the kit from .....So I've been duped....They have benefited from using my videos and quotes about their kit which is fine. But they have never taken care of me. And I shouldn't be surprised now. They have no integrity and are a bunch of weasels...Including David the internet sales person and owner Ron Neemar. I'd take it out of their asses if I had the opportunity to meet them. One way or another I would get satisfaction...They have ripped people off before. Hopefully not anymore though since it appears they are out of business. There phones have been shut off and they won't return my emails.
Lesson learned. Do business with bigger companies that have a track record....Small time faggots piss me the f**k off.
I think there balls need to be hung to dry,lesson learned indeed. Z
Well said Z!...only I could've brought Z to use such laguage lol
☆。★。☆。★
。☆。。☆。
★。\|/。★
Happy New Year!
★。/|\。★
。☆。 。☆。
☆。★。☆。★
Wishing a happy, prosperous, and mod filled 2016 to all!
Finally made the switch to Linux...
Mint Cinnamon 17.3.
Kicking myself in the ass for not doing it sooner.
It is definitely ready for prime time.
Was able to configure everything on this Dell laptop and everything works without having to use Terminal.
What is the intended purpose of the laptop, FoMoCo?
Internet, email, work, etc.
When I get my primary laptop back, i will have a small partition for Windows/SCT
Nice!
Here's a pretty coool article for all you Apple lovers out there and Ford sync carplay. Z http://appleinsider.com/articles/16/01/04/ford-to-bring-apples-carplay-to-all-sync-3-equipped-2017-vehicles (http://appleinsider.com/articles/16/01/04/ford-to-bring-apples-carplay-to-all-sync-3-equipped-2017-vehicles)
Quote from: ZSHO on January 04, 2016, 10:08:27 AM
Here's a pretty coool article for all you Apple lovers out there and Ford sync carplay. Z http://appleinsider.com/articles/16/01/04/ford-to-bring-apples-carplay-to-all-sync-3-equipped-2017-vehicles (http://appleinsider.com/articles/16/01/04/ford-to-bring-apples-carplay-to-all-sync-3-equipped-2017-vehicles)
Sync 2 is supposed to have some of these features, like sync apps. I have not been able to get mine to do anything. I was hoping to control Pandora and Spotify with voice commands.
Quote from: Scott4957 on January 04, 2016, 02:59:12 PM
Quote from: ZSHO on January 04, 2016, 10:08:27 AM
Here's a pretty coool article for all you Apple lovers out there and Ford sync carplay. Z http://appleinsider.com/articles/16/01/04/ford-to-bring-apples-carplay-to-all-sync-3-equipped-2017-vehicles (http://appleinsider.com/articles/16/01/04/ford-to-bring-apples-carplay-to-all-sync-3-equipped-2017-vehicles)
Sync 2 is supposed to have some of these features, like sync apps. I have not been able to get mine to do anything. I was hoping to control Pandora and Spotify with voice commands.
Check out this thread,hope it helps any. Z http://www.ecoboostperformanceforum.com/index.php/topic,5365.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,5365.0.html)
Thanks, I will try the update. I just assumed everything was for the iPhone, I use Android. Worth a shot, especially if I can do text to speech without having to reach for the phone.
Thanks
Just wondering what's the difference between the blue and black H&R lowering coil springs? I think the blue say W/P.... Any ideas?
A useful SSM regarding the PTU, courtesy of Madyaks:
(https://scontent-ord1-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/10350505_10153248473576867_3676868109982523451_n.jpg?oh=d2abad5f8364ffc97ecd040e6ff69b04&oe=5707A59A)
http://jalopnik.com/the-facelifted-2017-ford-fusion-gets-sporty-with-325-hp-1752182200?rev=1452492663973&utm_campaign=socialflow_jalopnik_facebook&utm_source=jalopnik_facebook&utm_medium=socialflow (http://jalopnik.com/the-facelifted-2017-ford-fusion-gets-sporty-with-325-hp-1752182200?rev=1452492663973&utm_campaign=socialflow_jalopnik_facebook&utm_source=jalopnik_facebook&utm_medium=socialflow)
A move in the right direction, I'd say!
I figured i'll share my Rock Auto Discount code for any member looking to purchase any items,here's the link. Z
Discount on RockAuto Parts!
Thank you for being a RockAuto customer! To show our appreciation, we have a special discount for you.
Your discount code is:
4034435536656531
How to Use Your Discount Code
Enter the code above in the "How Did You Hear About Us?" space on the checkout page (above your payment information). Do not enter any other text in that space or the discount will not apply.
Please note: Discount only valid for orders placed online. Code must be entered before order is submitted.
The discount takes 5% off our already-low prices. There's no limit on order size or the number of orders. Use the code for your next order, and share the code with anyone you know who works on cars or trucks.
This discount code expires on March 20, 2016 so don't wait!
Thanks again for buying your auto parts at RockAuto!
www.RockAuto.com (http://www.rockauto.com)
Possible availability of coilovers for the -13-15 SHOs (assuming Flex also, possibly XSport). Early stages yet, but you can follow the thread over at shoforum for now:
http://shoforum.com/index.php?threads/13-15-sho-coilover-prototype.131410/ (http://shoforum.com/index.php?threads/13-15-sho-coilover-prototype.131410/)
Proceed cautiously, but be optimistic :)
it's so nice to get power back after that crap gas is out of the tank. LOR is back to -1.0 and no more negative corrections
Great to hear, what a relief :thumb:
Quote from: SHOdded on January 21, 2016, 02:20:50 PM
Possible availability of coilovers for the -13-15 SHOs (assuming Flex also, possibly XSport). Early stages yet, but you can follow the thread over at shoforum for now:
http://shoforum.com/index.php?threads/13-15-sho-coilover-prototype.131410/ (http://shoforum.com/index.php?threads/13-15-sho-coilover-prototype.131410/)
Proceed cautiously, but be optimistic :)
Maybe Mike (EPP) can fill us in... Megan Racing (as indicated on the other forum as the manufacturer) has been working on them for over 2 years. They actually did a test fit a year or so ago which didn't work and so they had to send them back to get them modified.
There is a waiting list for these handled by Mike at EPP
The most current info on the coilovers is here:
http://www.ecoboostperformanceforum.com/index.php/topic,5733 (http://www.ecoboostperformanceforum.com/index.php/topic,5733)
Hopefully we will have fitment & ride verified soon, then on to production.
How much snow so far, Z? I thought the Delmarva peninsula is supposed to bear the brunt of Jonas? NY gets a break for a change?
Quote from: SHOdded on January 23, 2016, 07:26:57 AM
How much snow so far, Z? I thought the Delmarva peninsula is supposed to bear the brunt of Jonas? NY gets a break for a change?
Its hard to distinguish how much so far cause of the wind but so far there wrong. Z
Good thing you had the SHO detailed & protected!
The weather forecasters down played this Blizzard of a storm and ultimately were proven wrong as Mother nature prevailed and delivered over two feet of snow. Z
That is deep!!! Hope the streets will be plowed soon so that shoveling the driveway is actually useful! Gotta lick the baskin robbins icing around here too, that's gonna be fun :)
Wow, that's going to be a workout. We only got about a foot where I am on SWCT and as long as my snow blower starts my 200' driveway will be manageable.
Stay warm!
Sent from my iPhone using Tapatalk
Thanks SHOdded,66 Galaxie,to my surprise a Sanitation truck pulls up to the front of my house and the guy says i gotcha bro,it was a buddy of mine which helped out with his plow and putting xtra salt in the front,want to commend the Sanitation guys out there and there is a god indeed. Z :thumb: :clap2:
Wow!!! Even G** couldn't resist that shine, had to have it taken care of!
I found a great article in reference to replacing all six (COP)Coil on plugs and the benefits that come with it,essentially a cheap alternative to preventative maintenance if your going to change your spark plugs,something you may want to consider,hope this helps any. Z http://www.hendonpub.com/resources/article_archive/results/details?id=5090 (http://www.hendonpub.com/resources/article_archive/results/details?id=5090) http://www.rockauto.com/ (http://www.rockauto.com/) http://www.rockauto.com/catalog/moreinfo.php?pk=3422364&cc=1503823&jnid=495&jpid=0 (http://www.rockauto.com/catalog/moreinfo.php?pk=3422364&cc=1503823&jnid=495&jpid=0) MOTORCRAFT WR6135 {#BL3Z12A402A} $1.95 EA. X6 Boots needed.
Got some depressing news fellas...
I've been seperated from the wife for a month and I'm pretty sure I'm going the D route. Never been so happy and with a positive outlook on life, so all is good.
I'm going to sell my SHO. The '11 F-250 is paid for, so want to get rid of the payment and get $5k back in the bank to pay off a credit card. Local dealer offered me $23K. SHO has 30K miles. It's a fair offer. Carmax offered me $22K.
I like driving the truck more anyways and someday I'll get back into a quick sedan. But I think I'm a truck guy for now.
I'll post back if I sell it.
So sorry to hear, PM, best of luck with the big D, and with the sale of the SHO. Sucks you have to do all this, but being happy is way underrated, so go for it. Def keep us posted with what's going on!
I have been to hell and back on a couple occassions and certainly not an easy ordeal,glad to hear your in good spirits and wish you the best Munkee on a positive outcome on all fronts. Z
I'm so glad to see the defroster by the built in camera working especially after having a new windshield installed last fall. Z :)
Sweet!
I was curious if any members received any such notice pertaining to the recalls advised on this link or are any of you familiar with these recalls. Z http://www.carcomplaints.com/Ford/Taurus/2013/recalls/ (http://www.carcomplaints.com/Ford/Taurus/2013/recalls/) 2013 Ford Taurus FUEL SYSTEM, GASOLINE
NHTSA Campaign #15V812000[/b]
Date Announced:
DECEMBER 02, 2015
Vehicles Affected:
868[/b]
Summary: Ford Motor Company (Ford) is recalling certain model year 2013 Explorer, Explorer Police Utility, Taurus, Taurus Police Interceptor, Flex, Lincoln MKS, and Lincoln MKT vehicles. In the affected vehicles, the fuel delivery module may crack, allowing fuel to leak.
Consequence: A fuel leak in the presence of an ignition source may result in a fire.
Actions: Ford will notify owners, and dealers will replace the fuel delivery module, free of charge. The recall began on December 21, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 13S04-S1. For detailed information & supporting documents, see the official NHTSA page concerning recall #15V812000 »
An update of the earlier recall perhaps?
13V227000 (http://www.revbase.com/BBBMOTOR/TSb/DownloadPdf?id=180118): Ford is recalling certain model year 2013 Explorer, Taurus, Flex, Fusion, Police Interceptor Sedan and Police Interceptor Utility vehicles; and certain model year 2013 Lincoln MKS, MKT, and MKZ vehicles. In the affected vehicles, the fuel delivery module
Quote from: SHOdded on February 11, 2016, 10:45:53 PM
An update of the earlier recall perhaps?
13V227000 (http://www.revbase.com/BBBMOTOR/TSb/DownloadPdf?id=180118): Ford is recalling certain model year 2013 Explorer, Taurus, Flex, Fusion, Police Interceptor Sedan and Police Interceptor Utility vehicles; and certain model year 2013 Lincoln MKS, MKT, and MKZ vehicles. In the affected vehicles, the fuel delivery module
Thanks MANU and truly commend you for your fine effort and loyalty on the Ecoboost Platform in every aspect. Z :bowdown: :bowdown: :bowdown:
I guess with the Temp's being in the low digits today noticed some excessive h20 on the rear lower bumper area followed by some black soot exhibited on the floor area and some drops coming from the weep hole of the mufflers,guess she's running nice and rich,Btw need to wash her up but its just to dam cold.lol. Z
Great Job on (Editing)and organizing some threads,some early Spring cleaning was certainly needed. Z :thumb: :thumb:
Do you have an MDesign intake, Z? Curious if it would help reduce the soot issue.
Quote from: SHOdded on February 13, 2016, 08:55:06 AM
Do you have an MDesign intake, Z? Curious if it would help reduce the soot issue.
Negative Sir,have the Airaid since new,might put back the stock setup to see if it helps any,Btw noticed brand new SHO'S showing signs of black soot on the tail pipes,makes you wonder!!. Z :hmmm:
Its all the low quality fuel filled at the dealership ;)
I'v had Navi added to my car for quite sometime now from Jason over at www.fordpimods.com (http://www.fordpimods.com) and it has been working Flawlessly,contacted Siruis fm to renew my annual subscription and also to add travel link which is at an additional cost,spoke to Alfred over at Siruis fm and not only did he give me a geat deal but also was able to manually activate the travel link to the added Navi,a win on both fronts. Z :thumb:
Cool stuff, Z! Who says you can't have it all :)
I know 16xsport was trying to find a device to datalog with but I'm not sure if he found something so I sent him a PM with a link to this auction on eBay for an x3 at a great price. (Currently $1+$20 S&H) * edit - sold for $26.
If he doesn't buy it or get my PM in time I thought I should share the link if anyone else is looking for a super cheap way to data log.
Link: http://www.ebay.com/ulk/itm/161975299800
Sent from my iPhone using Tapatalk
I have been having the (BMS)Battery Management System)on the screen alert me to press o.k and to power off the vehicle while in accessory mode on a few occassions just after 5 min,while the car was checked the battery voltage on the instrument cluster and it was 11.8,also had code B1215 short to battery which was not an issue while having the car at the dealer a while back,guess the car needs to protect itself,heres some info pertaining to the issue. This is from a workshop manual
Charging System
The charging system is a negative ground system consisting of:
• a generator with an internal voltage regulator
• a charging system warning indicator
• a battery
• circuitry and cables
• a PCM
• a radial arm adapter (serviced separately from the generator)
• a battery current sensor (this is what's in the picture)
• a generator current sensor
The generator is driven by the accessory drive belt. When the engine is started, the generator begins to generate AC voltage which is internally converted to DC voltage. The DC voltage is controlled by the voltage regulator (located on the rear of the generator) and supplied to the battery. The PCM controls the voltage regulation set point, working with the generator internal voltage regulator over 2 control and communication circuits.
This vehicle is equipped with load shed strategy. The Body Control Module (BCM) monitors the battery state of charge using the battery current sensor
attached to the negative battery cable and the battery open circuit voltage as measured by the BCM during 8 continuous hours of vehicle sleep time (ignition off with doors closed).
With the engine off and the ignition in the ACC, RUN or delayed accessory position, when the BCM determines the battery state of charge is low, a message is sent to shut down the audio/navigation system in order to save the remaining battery charge. Under this condition:
• the Front Display Interface Module (FDIM) displays SYS OFF TO SAVE BATT (without navigation) or BATTERY SAVER — SYSTEM OFF
PLEASE START THE ENGINE (with navigation).
• the Instrument Panel Cluster (IPC) message center may also display TURN POWER OFF TO SAVE BATT (base message center) or TURN POWER
OFF TO SAVE BATTERY (optional message center) to notify the driver that battery protection actions are active.
• the battery indicator may also illuminate.
If the vehicle battery has been charged or battery replaced, it takes approximately 8 hours for the BCM to learn the new battery state of charge. During this 8 hour period, the vehicle must be undisturbed, with no doors opened or keyless entry buttons pressed. If the vehicle is used before the BCM is allowed to learn the new battery state of charge, engine off load shedding may occur earlier than normal and a message may be displayed.
If the vehicle has been jump started, engine off load shedding can still occur and a message may be displayed until the BCM determines the battery state
of charge is above 40%.
With the engine running, when the BCM and Power Steering Control Module (PSCM) voltage is low, a message is sent from the BCM to either minimize or
shut down the climate controlled seats, rear defrost, heated mirrors and Dual Automatic Temperature Control (DATC) blower motor to improve system
voltage. Under this condition, the IPC message center displays either LOW BATTERY LESS FEATURES (base message center) or LOW BATTERY. Z -MANU DO apologize for the long post or improper location. Z
Good info Z
The 15 has been through two batteries already and has random dead batteries. It appears the battery saver program fails to run all the way so the modules don't go to sleep and kill the battery. You can see on the Nav screen when you jump it that the routine started, failed about half way, and failed to complete.
Quote from: FoMoCoSHO on February 20, 2016, 06:02:35 PM
Good info Z
The 15 has been through two batteries already and has random dead batteries. It appears the battery saver program fails to run all the way so the modules don't go to sleep and kill the battery. You can see on the Nav screen when you jump it that the routine started, failed about half way, and failed to complete.
My dealer also replaced the battery under warranty last year,with the MC-BXT-65-850,and the P.Interceptor uses the 750. Battery - Heavy Duty
● Battery - Maintenance-Free
● Battery Rating - 750 Cca
● Battery Saver PI Battery. Z
Dealer told me if they replace my garbage 650 battery under warranty they have to use the same battery that came out...i said i wanted the 850
He said he cant and could lose his job...i told he he should lose his job for not putting in what he knows is better and do the right thing...hope ford sees this
Some dealerships can work it better with Ford, they know what Ford expects to hear & why. But it wouldn't be a bad thing to meet "halfway". I mean they could have just charged an "upgrade" fee in service to the customer, if nothing else. Assuming the customer acts friendly to them, of course. There's definitely times to be irate, but most situations warrant keeping your cool.
Alas... While I fear no SHO will be offered in the US for the '17 model year there is an upgraded tranny and 3.5 GDI coming to the F150 apparently... Scetchy details here:
http://www.forbes.com/sites/joannmuller/2016/02/26/ford-boosting-investment-in-cleveland-for-next-f-150-ecoboost-engines/#6ee607134f76 (http://www.forbes.com/sites/joannmuller/2016/02/26/ford-boosting-investment-in-cleveland-for-next-f-150-ecoboost-engines/#6ee607134f76)
I got tired of the factory 650 battery and just bought an 850 interstate battery. So much better.
I went through 3 factory batteries under warranty in less than a year, one of those left me stuck in a parking lot, but I got to meet a nice uber driver.. So that's cool. Hah.
Sent using smoke signals.
Hope the Interstate battery lives up to its' reputation! And yeah, the Uber service is very handy to have, def made me more independent.
Why can't someone produce a decent set of lightweight 20" wheels, like up to 20 lbs, and for an affordable price, say 1,000$, as opposed to 6,000$.
Saw this note on a Gates water pump replacement for the NA 3.5 engine:
QuoteA small amount of coolant leaking from the weep hole is normal. Small drips are OK. Longer streams or continuous leaking may indicate a problem. OE manufacturers developed the weep chamber as a way to hide the small drips so pumps are not prematurely determined to be failing. Those drips will remain in the chamber and evaporate as the engine heats up.
I wonder if it applies to the EB 3.5 also.
I believe it does.
Sent from my iPhone using Tapatalk
I guess some parts of California are in early preparation of the summer-fuel arrival,it looks like most of us will expect the transition to the long awaited summer-blend gasoline to be here roughly around June 1st with a modest increase in Summer prices. Z http://www.pennlive.com/life/2016/02/gas_prices_are_steadily_climbi.html (http://www.pennlive.com/life/2016/02/gas_prices_are_steadily_climbi.html) https://ycharts.com/indicators/gas_price (https://ycharts.com/indicators/gas_price) http://www.pressherald.com/2016/03/02/gas-prices-start-spring-upswing-but-expect-a-summer-of-savings/ (http://www.pressherald.com/2016/03/02/gas-prices-start-spring-upswing-but-expect-a-summer-of-savings/)
I have an appt at my local friendly dealer this Friday for an oil change and to further inspect a rear valve cover leaking right by the oil seperator which in fact was replaced under warranty over a year ago and also cleaned a few months back and all of a sudden after cleaning the engine bay noticed the oil is back just in time for Spring and pollen. Z :o
Ugh! Can't recall, that's still the original valve cover right, not the updated/composite one, Z? Hopefully the leak is simply a bad seal and not PCV related.
Quote from: SHOdded on March 30, 2016, 01:10:50 AM
Ugh! Can't recall, that's still the original valve cover right, not the updated/composite one, Z? Hopefully the leak is simply a bad seal and not PCV related.
Thanks MANU,had it replaced under warranty back on 12/14 and i'm confident my dealer will do the right thing and sure like the looks of the composite covers though,will keep ya updated. Z
I visited my local friendly Ford dealer yesterday and essentially had a long discussion with the senior tech which is a good buddy of mine after changing the oil which was pretty darn black at roughly 3k on the oil and even after just changing it he showed me the dipstick and it still looked dirty using Redline full synthetic oil and probably change it again in a couple of weeks,the issue was the extensive idling due to the cold winter months which depleted the oil much quicker and also reiterated to not trust the oil life monitor and urged to install a catch can ASAP Due to the fact of these DGI get much hotter and agreed that it should not be an option but mandatory that an oil catch can come from the factory and certainly be included on the Ecoboost platform and not an alternative,found the UPR and Rx oil catch cans to be far superior and both are great quality units which can be found here,time to get some coffee.LOL Z http://www.ecopowerparts.com/shop/index.php?main_page=product_info&cPath=1&products_id=122&zenid=29cdd10ad0d22818a443812300e660f0 (http://www.ecopowerparts.com/shop/index.php?main_page=product_info&cPath=1&products_id=122&zenid=29cdd10ad0d22818a443812300e660f0) BTW the remote start is a nice feature but does prolong higher idling IMHO. Z
Good info, Z! So idling is worse for GDI engines than PFI engines, for example? Do you think its just the oil doing its thing maybe, different oils clean differently and look different at similar intervals.
I thought the device on top of the rear valve cover was a type of oil seperator or " catch can" if you will?....and Z have you ever had oil analysis performed?...oil color is not an effective measure for life...i thought you knew that...you need to know total base number remaining...thats a more important factor than color....my oil is black after first start up after an oil change
Using Amsoil still, AJ?
If your referencing to the oil seperator (dirty side)on top of the rear valve cover it simply will not collect all the unmeasurable amounts of blow by due to high boost,compression on the GDI,especially the h20/gas mixture and oil thats found on the TB/CAC/intake charge pipes and hopefully a oil catch can will alleviate those issues,AJ not quite sure on the mileage on your car but my oil always looked golden after an oil change with the exception of yesterdays oil change,another note to mention is the SHO is my DD and on a daily basis do use the remote start feature and does rev higher and longer compared to a normal startup and should limit the feature IMO,as far as the oil life monitor goes personally like to keep any and all new members up to date and informed in that dept and thanks for your insight. Z :)
Either way....golden or black...doesnt mean much unless you have oil analysis built into your vision.....you come up with some strange stuff z...i wouldnt worry about limiting use of the remote starter....we clearly have a different idea on what dirty black and gold is...change your oil and go for a ride...your oil will be as black as mine
Quote from: AJP turbo on April 02, 2016, 10:27:57 AM
Either way....golden or black...doesnt mean much unless you have oil analysis built into your vision.....you come up with some strange stuff z...i wouldnt worry about limiting use of the remote starter....we clearly have a different idea on what dirty black and gold is...change your oil and go for a ride...your oil will be as black as mine
:beer2: :beer2: Z
Well turned out to be an AWESOME night of racing. Won the True Street class I run in. Was a very tight final. I ran on a 13.12 dial and ran a 13.124 and other car dialed a 16.35 and ran a 16.368. Difference on the victory was .077. Yeah it was tight. When the temps dropped and wind calmed down, I had to keep dropping my dial down. Even the 13.12 I dialed in for the final, I still had to hit the brakes. Thank FORD for upgrading the brakes on these things. Also got a bonus out of this night too. They have a class known as Top Street. They take the fastest 8 cars from qualifying time shot and run them off. They always come from the Modified Street class. Since it was kinda light car count, I didn't know that the also combined True Street cars in the Top Street. Well the SHO made it. I joked all last year, that it would be cool to see the SHO in that class. Well it happened last night. When they called out the line up, I kinda had to do a double take and went up to the tower just to make sure it was right. Yeah it was. So I got to run with the big boys. Weird being the car that was being run down, used to it being the other way. Lost in first round, but didn't matter it was cool. So good way to start out the season!!!
(http://i1382.photobucket.com/albums/ah244/bamkmm91/Mobile%20Uploads/20160401_220022_zpscphaiknv.jpg) (http://s1382.photobucket.com/user/bamkmm91/media/Mobile%20Uploads/20160401_220022_zpscphaiknv.jpg.html)
Quote from: bamsho on April 02, 2016, 06:01:38 PM
Well turned out to be an AWESOME night of racing. Won the True Street class I run in. Was a very tight final. I ran on a 13.12 dial and ran a 13.124 and other car dialed a 16.35 and ran a 16.368. Difference on the victory was .077. Yeah it was tight. When the temps dropped and wind calmed down, I had to keep dropping my dial down. Even the 13.12 I dialed in for the final, I still had to hit the brakes. Thank FORD for upgrading the brakes on these things. Also got a bonus out of this night too. They have a class known as Top Street. They take the fastest 8 cars from qualifying time shot and run them off. They always come from the Modified Street class. Since it was kinda light car count, I didn't know that the also combined True Street cars in the Top Street. Well the SHO made it. I joked all last year, that it would be cool to see the SHO in that class. Well it happened last night. When they called out the line up, I kinda had to do a double take and went up to the tower just to make sure it was right. Yeah it was. So I got to run with the big boys. Weird being the car that was being run down, used to it being the other way. Lost in first round, but didn't matter it was cool. So good way to start out the season!!!
(http://i1382.photobucket.com/albums/ah244/bamkmm91/Mobile%20Uploads/20160401_220022_zpscphaiknv.jpg) (http://s1382.photobucket.com/user/bamkmm91/media/Mobile%20Uploads/20160401_220022_zpscphaiknv.jpg.html)
Congrats Brian! Just a Taurus :no1: LOL!
Nice work, Brian.
Congrat B! Sounds like a fun time.
Sent from my iPhone using Tapatalk
just went over 30k miles last night. time to put another gallon of ATF through and change the PTU fluid
Happy drivetrain dance :)
I'm not sure how i missed this one. Z Explorer/lincoln recalls http://www.carcomplaints.com/news/2016/ford-recalls-vehicles-3-recalls.shtml (http://www.carcomplaints.com/news/2016/ford-recalls-vehicles-3-recalls.shtml)
I will be going to p/up my new bottom cover at the Dealer this week and will have them also change the brake fluid,had a bit of change in heart and after doing a bit of research ended up ordering two bottles of Motul synthetic fluid which is somewhat compatible to oem specs and will keep you updated on my initial feel. Z http://www.amazon.com/Motul-8068HL-Factory-Percent-Synthetic/dp/B004LEYJO4?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 (http://www.amazon.com/Motul-8068HL-Factory-Percent-Synthetic/dp/B004LEYJO4?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00) https://www.motul.com/system/product_descriptions/technical_data_sheets/2636/rbf_660_factory_line_8472_(gb)_1_.pdf (https://www.motul.com/system/product_descriptions/technical_data_sheets/2636/rbf_660_factory_line_8472_(gb)_1_.pdf) FMVSS 116 DOT 4 / SAE J1703 & J1704 / ISO 4925
Motorcycle gurus swear by motul.
Quote from: ZSHO on April 24, 2016, 01:58:45 PM
I will be going to p/up my new bottom cover at the Dealer this week and will have them also change the brake fluid,had a bit of change in heart and after doing a bit of research ended up ordering two bottles of Motul synthetic fluid which is somewhat compatible to oem specs and will keep you updated on my initial feel. Z http://www.amazon.com/Motul-8068HL-Factory-Percent-Synthetic/dp/B004LEYJO4?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 (http://www.amazon.com/Motul-8068HL-Factory-Percent-Synthetic/dp/B004LEYJO4?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00) https://www.motul.com/system/product_descriptions/technical_data_sheets/2636/rbf_660_factory_line_8472_(gb)_1_.pdf (https://www.motul.com/system/product_descriptions/technical_data_sheets/2636/rbf_660_factory_line_8472_(gb)_1_.pdf) FMVSS 116 DOT 4 / SAE J1703 & J1704 / ISO [/b]4925
This was fun.
Here's a link to the interactive configurator for the '17 Ford GT. I never get tired of looking at the car. I can dream can't I?
https://www.ford.com/performance/gt/?srccode=500291&cks=34168925809&emailid=16q2_ford_xoxx_apr_nl (https://www.ford.com/performance/gt/?srccode=500291&cks=34168925809&emailid=16q2_ford_xoxx_apr_nl)
I have been driving with no bottom Splash Shield cover for over two weeks and finally the other day the Dealer installed a new one for me and after driving for a couple of days now noticed my temp gauge fluctuating alot more compared to before and the car seems a bit faster telling me that the cover was put on there for a reason associated with cooling and the aerodynamic aspect is in play,figured i'll share my personal experience since noticing many members driving with no bottom cover,just my 2 cent. Z
Just thinking about my past cars, how fast they where for the time and I find it crazy to think the SS-MKS, "cuz its a boat" is my fastest car, at least after the meth is tuned. Next in line was my GTO, stock but the MKS will walk all 6 liters of it in the 1/4 no problem. My MazdaSpeed 3 was a beast but no traction and still doesn't have the HP/TQ per pound of the MKS. I had a 2012 Genesis Coupe R-Spec......no comment. My 2012 50th anniversary CBR1000RR, yeah that speed hurt bad. The best memories where with my RSX and my Yamaha FZR600 "didn't wreak that one" I owned them at the same time. My favorite car because it had so many memories tied to it and was my first new car was my 2002 Acura RSX Type S. I look at the numbers and it was so so so slow LOL but the mustangs of that year where just as slow. No one knew what it was, I had one of the first in the area and would hand GT's their asses all the time. On paper it was a bit behind the GT but with my mods and some better driving I always got the jump and left them behind. Prior to the RSX I didn't have anything that fast but I made sure I got them all up to their max speed, something I avoid now. I'm sure some of you old guys go back much further than that. I started driving in 96-97.
Yep some of us are old! My first car was a rambler station wagon with a flathead v8 and push button automatic, LOL... But I traded her for my first taste of muscle... A brand new '68 charger. Loved it... But it really was a boat and makes my SHO look small by comparison....and yes, our cars would eat it in the quarter even with the hemi. Couldn't keep the tires engaged.
(http://i1331.photobucket.com/albums/w596/knot2bfound/Junk/1968ChargA1_zpsdf864b24.jpg) (http://s1331.photobucket.com/user/knot2bfound/media/Junk/1968ChargA1_zpsdf864b24.jpg.html)
That's a beaut, BiGMaC!
Ok bit the bullet and went with the UPR catch can. Ordered from Mike. I will do plugs T-stat and can when it arrives.
Quote from: SHOme on May 02, 2016, 02:37:19 PM
Ok bit the bullet and went with the UPR catch can. Ordered from Mike. I will do plugs T-stat and can when it arrives.
They're a week behind now, should ship next week.
Thanks!
Mike
Bpd found this... Interesting read!
http://www.streetlegaltv.com/news/getting-the-lowdown-on-ecoboost-piston-design-with-mahle/?utm_source=rss&utm_medium=rss&utm_campaign=getting-the-lowdown-on-ecoboost-piston-design-with-mahle (http://www.streetlegaltv.com/news/getting-the-lowdown-on-ecoboost-piston-design-with-mahle/?utm_source=rss&utm_medium=rss&utm_campaign=getting-the-lowdown-on-ecoboost-piston-design-with-mahle)
Good read for sure, thanks bpd & BiGMaC :thumb:
In the spirit of the above, here's a news article on the upcoming new engine/trans combo for the F150:
http://www.automobilemag.com/news/2017-ford-f-150-adds-second-gen-3-5-liter-ecoboost-10-speed-transmission/ (http://www.automobilemag.com/news/2017-ford-f-150-adds-second-gen-3-5-liter-ecoboost-10-speed-transmission/)
"The biggest change is that the new V-6 now supplements its direct injection with port fuel injection, meaning there are two injectors per cylinder. In high-load situations, both injection systems work together for maximum power, but in low-load scenarios only port fueling is used, which Ford says improves efficiency."
Interesting, no?
Quote from: SHOdded on May 03, 2016, 06:06:53 PM
In the spirit of the above, here's a news article on the upcoming new engine/trans combo for the F150:
http://www.automobilemag.com/news/2017-ford-f-150-adds-second-gen-3-5-liter-ecoboost-10-speed-transmission/ (http://www.automobilemag.com/news/2017-ford-f-150-adds-second-gen-3-5-liter-ecoboost-10-speed-transmission/)
"The biggest change is that the new V-6 now supplements its direct injection with port fuel injection, meaning there are two injectors per cylinder. In high-load situations, both injection systems work together for maximum power, but in low-load scenarios only port fueling is used, which Ford says improves efficiency."
Interesting, no?
Wish someone would make heads for a retrofit.... Keep the intake valves clean!
Quote from: BiGMaC on May 03, 2016, 08:38:43 PM
Wish someone would make heads for a retrofit.... Keep the intake valves clean!
I know, right? Probably the cheapest solution is still meth injection, though it would be nice to have an in situ solution.
I was curious if anyone had any updates on the LME CAD event or maybe LME will chime in on the topic. TIA. Z :)
Join us June 16th for the 2016 Livernois Motorsports & Engineering Customer Track Day at Milan Dragway. For Livernois Motorsports & Engineering customers and their family only. RSVP via Facebook by May 31st to reserve your spot and ensure that there is enough food and swag for all attendees. Alternatively you may RSVP by sending an email to info@livernoismotorsports.com.
Quote from: Livernois Motorsports on May 05, 2016, 04:00:22 PM
Join us June 16th for the 2016 Livernois Motorsports & Engineering Customer Track Day at Milan Dragway. For Livernois Motorsports & Engineering customers and their family only. RSVP via Facebook by May 31st to reserve your spot and ensure that there is enough food and swag for all attendees. Alternatively you may RSVP by sending an email to info@livernoismotorsports.com.
Dangit! 2 weeks after i leave. So close :(
Test and Tune Today @ National Trails @ 530
Do i want to go again.... Why yes I do... :)
Quote from: irondoor19 on May 13, 2016, 12:40:08 PM
Test and Tune Today @ National Trails @ 530
Do i want to go again.... Why yes I do... :)
Ok bested my Best Time First Run Out, Power and Torque Way UP.. YAAAA
@ irondoor
Have you changed anything since your actual dyno run?
No
When it was LAST On the Dyno the Temp was way Up (like in the 90's) and
what is being Shown Is (I assume) is at the Back of the Motor, Not the Wheels (Dashcommand)
AND the Data shown is after the 1ST run at the The Strip (on 05-13-16, my PB) 12.530 @ 109
and the Screen Shot i took Previously Only had 520 HP. (on 04-29-16, Prv PB) 12.577 @ 108
SO I think I was building More Boost On the Latest Go Round to Start.... 1 PSI...?
Plus My Drag Racing Skills are a tad Rusty, We were First Cars out on the Track, Trackion Control WAS OFF...
Beat a late model LS1 Camaro, Little Front Tires, Plenty of Mods,
He bested me by A .117, but i treed him, Won by .1623,
AND Got Yelled at by the Officials, at the End of the Track (Ipad in the Window)
who then wanted to know what I was Running, and Told Me my time and that
"This Boat is way Quick" ha..
The weather hasnt complied so far but its looking much brighter before Memorial day. Z (http://i.imgur.com/Lhty8Ac.gif?1)
It look's like Ford.com has updated there site and added a Maintenance schedule which SHO'S you a complete service history which is pretty cool. Z https://owner.ford.com/tools/account/maintenance/maintenance-schedule.html#/details Click under Service history.when you sign in.
Not sure if ford will do this but I was able to talk the online chat rep on lincoln.com into emailing me a PDF of my window sticker. They ability to do it online at several site disappeared one day about 8 months ago.
Kewl; yeah, unknown why the database was made inaccessible to the public. But they pulled access to a lot of stuff, including TSBs.
Quote from: Scott4957 on May 26, 2016, 04:47:33 PM
Not sure if ford will do this but I was able to talk the online chat rep on lincoln.com into emailing me a PDF of my window sticker. They ability to do it online at several site disappeared one day about 8 months ago.
Thats great to hear because based from Ford.com site there prohibited from transmitting such information and recommend going through www.Fordshowparts.com (http://www.fordshowparts.com) Z http://www.fordshowparts.com/store.cfm?dept_id=1137&store_id=1&parentID=1137 (http://www.fordshowparts.com/store.cfm?dept_id=1137&store_id=1&parentID=1137) Definitely need to get a SHO Certificate. Z (http://i.imgur.com/hA9Ppjo.jpg?1) http://www.fordshowparts.com/store_contents.cfm?cart_id=06015288970111114100831049011620162605&store_id=1&dept_id=1137&product_id=6989 (http://www.fordshowparts.com/store_contents.cfm?cart_id=06015288970111114100831049011620162605&store_id=1&dept_id=1137&product_id=6989) Actually SHOdded and BiGMaC introduced me to this site a while back which is pretty cool. Z 8)
I was driving for a couple hrs yesterday and noticed the A/C is not as cold as it can be even with the 94 degree day, it was lacking that "ice cold beer"that you look forward to and it was just not cold enough for my Taste and also ran out of washer fluid while driving and there was no "low washer fluid" set on the instrument cluster and back to the dealer i go. Z >:(
Checked the coolant level, Z?
Quote from: SHOdded on May 29, 2016, 05:35:04 PM
Checked the coolant level, Z?
I checked it early this morning on a cold start and it was full not like the washer fluid which took well over a gallon of fluid,darn bug's,thanks for your input. Z
I have a used noisemaker that i wanted to sell but i thought it would be best to help a fellow member out and as usual give a helping hand by starting a FREE Raffle on the Noisemaker that comes with HPS Couplers and T-Bolts clamp's which cost me roughly over 200.00 for the set,will have complete info pertaining to this last minute idea of mine tomorrow,thanks and have a pleasant evening .Z(http://i.imgur.com/GZGWXZ9.jpg?1)
Quote from: ZSHO on June 01, 2016, 10:35:51 PM
I have a used noisemaker that i wanted to sell but i thought it would be best to help a fellow member out and as usual give a helping hand by starting a FREE Raffle on the Noisemaker that comes with HPS Couplers and T-Bolts clamp's which cost me roughly over 200.00 for the set,will have complete info pertaining to this last minute idea of mine tomorrow,thanks Z (http://i.imgur.com/GZGWXZ9.jpg?1)
Awesome, that's nice of you! So this replaces the elbow/hose combo that comes off the TB down to the IC? I don't have a noisemaker to eliminate in the MKS, but having a metal pipe to tap for meth over the plastic would be nice....maybe extra room to add a 50 shot!?!?!
Quote from: Scott4957 on June 01, 2016, 10:40:36 PM
Quote from: ZSHO on June 01, 2016, 10:35:51 PM
I have a used noisemaker that i wanted to sell but i thought it would be best to help a fellow member out and as usual give a helping hand by starting a FREE Raffle on the Noisemaker that comes with HPS Couplers and T-Bolts clamp's which cost me roughly over 200.00 for the set,will have complete info pertaining to this last minute idea of mine tomorrow,thanks Z (http://i.imgur.com/GZGWXZ9.jpg?1)
Awesome, that's nice of you! So this replaces the elbow/hose combo that comes off the TB down to the IC? I don't have a noisemaker to eliminate in the MKS, but having a metal pipe to tap for meth over the plastic would be nice....maybe extra room to add a 50 shot!?!?!
The best of my knowledge it should work,its only referenced as a Noisemaker and will certainly have more details for all of ya. Z :)
FYI this morning after cleaning up the pipe and trying to get it ready noticed the bottom portion of the pipe that connects to the IC slightly bent,you can notice on the above pic's at the very bottom and guess the combo of installing some HPS heavy duty T-bolts clamps and over tightening it led to the issue and truly apologize for any inconvenience in this matter and just dont want to give away something thats misleading and its just not who i am and should of inspected it prior to making this post,guess you live and learn,thanks. Z :sorry:
I truly had the Distinct honor and privilege to finally meetup with SHOdded after all these year's and it was an honor to shake hands with such a respectable,genuine and well known person in the Ecoboost community such as him and hopefully we can meetup once again in the very near future and an Awesome Guy indeed. Z :thankyou: :clap2: :bowrofl: :clap2: :bowrofl: :clap2: :bowrofl: :clap2: :thankyou:
If there was ANYTHING lacking, it was that I didn't get to ride in Z's sweet SHO, but it was quite a sight to see it in person :) But the exhaust sounds pretty awesome in person, better than any video/audio I have ever seen/heard :thumb: :thumb:
Quote from: SHOdded on June 05, 2016, 10:19:05 PM
If there was ANYTHING lacking, it was that I didn't get to ride in Z's sweet SHO, but it was quite a sight to see it in person :) But the exhaust sounds pretty awesome in person, better than any video/audio I have ever seen/heard :thumb: :thumb:
-MANU your much to kind,definitely will save the drivers seat for ya the next time around,only for ya. Z :)
👬👨❤️👨. Alright enough with the new found bromance
LOL
i went out of town for a TDY this past weekend and my wife decided she was going to drive my car. When the gas tank got low she put in 17 gallons of E85. fantastic, the CEL light is on and the codes are for Lean bank 1 and bank 2. It's looking like easy driving for a bit to drain out this E85. here's to hoping the fuel pumps get through this unscathed... hopefully the ACES IV will help
Ooops! I would just siphon most of it out. I'm not sure anyone had determined that this pump won't suffer the sticky/black death that the Mazda DISI suffers from. Though I think there where some guys running E85 with aux injectors so maybe that is not an issue with this HPFP.
def drive carefully, shouldn't hurt the fuel system over just one tank, but once below half mark, fill with premium just to dilute it out. If you can pump it out, like Scott suggested, that's great, but you'd need an appropriate container for storage.
I wouldn't worry about the pump, I've had some pretty high blends.
I'd be most worried about running out of fuel tuned. The good thing is you have octane for days, lol.
I would add 3 extra ounces of aces, and retune the car to stock until you can get the trims below the cel threshold.
They cel should go off once the trims drop and then you can clear the code with one of the obd programs.
It would also be an opportune time to get some logs, lol.
Here's a purdy cool article on Ford Performance,enjoy. Z http://performance.ford.com/enthusiasts/fan-spotlight/2016/06/mustang---cobra-dreams-come-true-for-metro-detroiter-russ-consig.html?cks=432128850&emailid=FP_FASTNEWS. (http://performance.ford.com/enthusiasts/fan-spotlight/2016/06/mustang---cobra-dreams-come-true-for-metro-detroiter-russ-consig.html?cks=432128850&emailid=FP_FASTNEWS.) 8)
(http://uploads.tapatalk-cdn.com/20160618/289f2ce474bf6fdfc0edc185a713fe8c.jpg)
We have a big single turbo Ecoboost SHO roaming the earth!!!!
Sent from my SM-N920V using Tapatalk
Show me a better pic of that engine bay! I like it. That phone pic sucks
Quote from: ZSHO on June 18, 2016, 07:57:19 AM
Has anyone tried these,Damn there good!. Z
See them all the time at the local Oriental marts. May be time to try some. I bet you are looking for a variety whose skin color matches your SHO's ;)
Quote from: AJP turbo on June 18, 2016, 01:02:27 PM
Show me a better pic of that engine bay! I like it. That phone pic sucks
(http://uploads.tapatalk-cdn.com/20160618/4163793f6204035b8e5480d0765356c8.jpg)
Sent from my SM-N920V using Tapatalk
Man I thought about that but heat issues were a huge concern to me. I look forward to seeing the results.
Two words..... turbo lag.
But still, interesting nonetheless.
Aesthetically it looks hideous. Lol.
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on June 18, 2016, 01:35:46 PM
Two words..... turbo lag.
But still, interesting nonetheless.
Aesthetically it looks hideous. Lol.
Sent from my SM-N920V using Tapatalk
Maybe....but what size is the turbo?...if its a precision 5858 or a 5558 i bet its not bad at all...6262 maybe some lag
It's a 68
Sent from my SM-N920V using Tapatalk
Thats pretty big...shoukd support around 800 hp....my 5858's support about 600 each
Quote from: AJP turbo on June 18, 2016, 03:06:16 PM
Thats pretty big...shoukd support around 800 hp....my 5858's support about 600 each
What the hell are those in?
Sent from my SM-N910V using Tapatalk
I'll laugh when he tries tracking it, gets no traction due to a ton of wheel spin, then pops his trans, or grenades half shafts, etc.
Lol.
Sent from my SM-N920V using Tapatalk
I messaged the guy, I'll try and help him as much as I can, cool to see someone go a different route. There's a Motek ECU that can control PFI and DI along with many added advantages like torque management beyond factory ECU capabilities, flex fuel (mix of gas to full E85 and anywhere in between), traction control that is amazing. We'll see what they do. I'm looking at that ECU for my '17 Raptor when it comes in.
Quote from: Scott4957 on June 18, 2016, 04:25:53 PM
Quote from: AJP turbo on June 18, 2016, 03:06:16 PM
Thats pretty big...shoukd support around 800 hp....my 5858's support about 600 each
What the hell are those in?
Sent from my SM-N910V using Tapatalk
2014 mustang gt
I'm thinking with that big Turbo that traction shouldn't be an issue...it's going to be supplying fuel.
Sent from my SM-N920V using Tapatalk
Quote from: AJP turbo on June 18, 2016, 04:58:33 PM
Quote from: Scott4957 on June 18, 2016, 04:25:53 PM
Quote from: AJP turbo on June 18, 2016, 03:06:16 PM
Thats pretty big...shoukd support around 800 hp....my 5858's support about 600 each
What the hell are those in?
Sent from my SM-N910V using Tapatalk
2014 mustang gt
I bet that is fun!
Sent from my SM-N910V using Tapatalk
Very impressive... I'd love to see the dynos or track times. I agree with ajp on the turbo lag... Not clear how the exhaust is plumbed to run it. The biggest problem I see, beyond overtaxing the driveline and some internals as Mike points out, is the fact that there is no apparent CAI or air filtration of any type... Is it sucking hot engine bay air? Is there no air filter? Is this a track only car?
I just dont know where to start but unfortunately my father passed away a short time ago and want to thank many of you who have supported me during this ordeal,thanks. Z :rip: :rip:
Quote from: ZSHO on June 21, 2016, 05:28:38 PM
I just dont know where to start but unfortunately my father passed away a short time ago and want to thank many of you who have supported me during this ordeal,thanks. Z :rip: :rip:
I am SO SO SO sorry for your loss Z. My condolences to you and your family.
Quote from: ZSHO on June 21, 2016, 05:28:38 PM
I just dont know where to start but unfortunately my father passed away a short time ago and want to thank many of you who have supported me during this ordeal,thanks. Z :rip: :rip:
Z, my condolences to you and your family.
Hang in there z, think of the good times buddy
My sincerest condolences Z. Sorry for your loss.
So sorry to hear Z...Our prayers are with you
Sent from my SM-N920V using Tapatalk
Prayers are with you and your family Z. Hang in there.
Condolences and prayers.
Tough to overcome the loss of a parent.
Sent from my SM-N920V using Tapatalk
Sorry for your loss Z
Sent from my XT1096 using Tapatalk
oh no, sorry for your loss. :(
Quote from: SHOdded on June 16, 2016, 02:59:39 PM
def drive carefully, shouldn't hurt the fuel system over just one tank, but once below half mark, fill with premium just to dilute it out. If you can pump it out, like Scott suggested, that's great, but you'd need an appropriate container for storage.
I got the tank down to half and put in E0 91 and after a day of driving the CEL cleared. I found out the remote start won't work with a CEL and I was working day shift... that took me back to the days of living in Phoenix and getting into an oven car.
Glad you made it out unscathed, did you have to mind your driving style at all? I know they put a safety net around remote start, but it's no fun getting into an oven ...
I never got on the car too hard. when passing on the freeway, the car didn't feel as powerful and had that shudder going on. now that the mix is close to E20 again the car definitely has more oomph and no more shudder.
Just got sent this notice from AMSOIL, affects US customers only. Buy your stuff before Aug 1, right now I think they have a coupon for $5 shipping for orders over $50.
U.S. Price Adjustment Effective Aug. 1
"After holding the line on pricing in the U.S. for the past five years, we are forced to implement a minimal price adjustment effective Aug. 1. The costs of base oils and other raw materials have increased significantly in the past few months, while the costs of every aspect of manufacturing and distribution have increased over the past five years. The accumulation of those increased costs requires an average price increase of 6 percent on many AMSOIL products. The renewed strength of the Canadian dollar and relative stability of the exchange rate has allowed us to leave Canadian pricing as it stands."
Thanks for the heads up, with all the torture I have been putting the car through dialing this setup in I think I will be changing early this time.
I found a pretty cool article on the comparison study between the 2016 Ford PI and 2016 Explorer which have a limiter set. UNDER PERFORMANCE http://www.government-fleet.com/article/story/2016/06/police-interceptor-utility-vs-ford-explorer.aspx (http://www.government-fleet.com/article/story/2016/06/police-interceptor-utility-vs-ford-explorer.aspx)
I was driving the other day and had the TPMS sensor Fault displayed on the LEFT side of the instrument cluster followed by the icon blinking and then just stayed on.....then the next day the warning light went away,but noticed as soon as i PLUG in my monster mini charger to charge my phone the warning light lit up again leading me to believe the charger is causing some kind of front interference with the Module causing a B-124D Code and also this video confirms my theory,hope this helps anyone out and saving a trip to the dealer. Z https://www.youtube.com/watch?v=YMevsqjSEIQ (https://www.youtube.com/watch?v=YMevsqjSEIQ)
Great tip, Z! I try to only use Anker brand chargers, they have not caused any hiccups in any vehicle I have driven.
I just plug into a USB port, but it sure charges slow. Anyone know the charging rate for the USB outlets in the center console?
The TWO USB port's inside the armrest compartment only suffice 5=VOLTS....it explains the slow charging...the front and rear charger ports are 12=VOLT'S and should only be utilized for charging phones,tablets etc. Z
My stuff charges much quicker with the Anker charger and cable combo from the 12v port in the console.
Check out the new GT Color and new cool color bembo's at the bottom of the page,enjoy. http://performance.ford.com/enthusiasts/media-room/2016/07/ford-gt-color--material-choices-are-intentional--purposeful--cus.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/media-room/2016/07/ford-gt-color--material-choices-are-intentional--purposeful--cus.html?cks=432128850&emailid=FP_FASTNEWS) Z
Nice!
My last Nissan had the bronze/gold color Brembo's. My car/year didn't have them standard so I adapted them to my model. I can tell you that, up close, the build quality is second to none. The opposed piston design and overall build was amazing. The pedal feel and clamping force was insane. The SHO/MKS at their price deserve those calipers!
If someone offered me a new Ford GT or a 2005/2006 for free, I would have a hard time deciding. That says a ton about the new one as I consider the previous generation one of the best cars ever built.
On a side note, I weighed my factory wheel/tire combo while off of the car.
Came in at 61 lbs with mostly worn factory Michelin's. I'm thinking that the tires have lost at least two pounds of rubber since they have 29,000 miles on them and are near end of life. Tire Rack lists them at 29 lbs when new. Add in maybe two pounds for the tire pressure monitor/valve stem and I figure that means the factory Lincoln 20" wheel weighs at least 32 lbs.
61 - 29 - 2 + 2 = 32
Does that seem reasonable?
I am curious because I have been shopping aftermarket wheel options and would like to gain width while shaving at least a little weight.
Quote from: ZSHO on July 07, 2016, 11:27:13 AM
The TWO USB port's inside the armrest compartment only suffice 5=VOLTS....it explains the slow charging...the front and rear charger ports are 12=VOLT'S and should only be utilized for charging phones,tablets etc. Z
all usb ports are 5 volts. what you want to look for is the amperage of the port. a 1 amp port will charge quicker than a 500 milliamp port
https://www.youtube.com/watch?v=Bk51YR7TX5A (https://www.youtube.com/watch?v=Bk51YR7TX5A)
two ecoboost review
2017 f150 review
http://www.automobilemag.com/news/2017-ford-f-150-new-ecoboost-v-6-packs-470-lb-ft-torque/?wc_mid=4035:2500&wc_rid=4035:817863&_wcsid=17A4E4F3B6B37F032126698C2D0FD721D4F33F24C9701BF8 (http://www.automobilemag.com/news/2017-ford-f-150-new-ecoboost-v-6-packs-470-lb-ft-torque/?wc_mid=4035:2500&wc_rid=4035:817863&_wcsid=17A4E4F3B6B37F032126698C2D0FD721D4F33F24C9701BF8)
Have any of ya seen this article on software complaints and TSB. Z http://www.theautochannel.com/news/2016/05/24/239491-record-numbers-software-complaints-and-recalls-threaten-trust-automotive-technology.html (http://www.theautochannel.com/news/2016/05/24/239491-record-numbers-software-complaints-and-recalls-threaten-trust-automotive-technology.html)
Nice summary.
It looks like GAS Prices are holding steady...currently getting 17mpg with summer blend gas with mostly city driving with a seldom heavy pedal due to speed cameras. Z http://media.gasbuddy.com/content/docs/2016forecast.pdf (http://media.gasbuddy.com/content/docs/2016forecast.pdf)
Do you know if there was any change in formulations. Compared to last year, Z? Costco (top tier) in our area went up from around 1.80 to 2.30 to 2.03 currently.
Quote from: SHOdded on July 17, 2016, 08:40:02 AM
Do you know if there was any change in formulations. Compared to last year, Z? Costco (top tier) in our area went up from around 1.80 to 2.30 to 2.03 currently.
-MANU sorry for the delay just been busy and all.....IDK any current changes IMHO. Z
Busy is good! :thumb:
New Attitude same Red Box.....hope the quality is the same!!!. Z http://njparts.com/flyers/2016/6/30/new-motorcraft-attitude-same-red-box (http://njparts.com/flyers/2016/6/30/new-motorcraft-attitude-same-red-box)
Ya, hopefully a positive outcome.
Here are a couple of cool Ford racing articles for ya to enjoy. Z http://performance.ford.com/enthusiasts/fan-spotlight/2016/07/_66-fairlane-love-turns-bill-collins-roadside-buy-into-428-resto.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/fan-spotlight/2016/07/_66-fairlane-love-turns-bill-collins-roadside-buy-into-428-resto.html?cks=432128850&emailid=FP_FASTNEWS) http://performance.ford.com/enthusiasts/newsroom/2016/07/bay-area-mustang-association-finds-ponies---snakes-can-get-along.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/newsroom/2016/07/bay-area-mustang-association-finds-ponies---snakes-can-get-along.html?cks=432128850&emailid=FP_FASTNEWS) :)
Cool!
The all new FORD PASS your KEY to a new journey,pretty cool and enjoy. Z http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15 (http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15)
Quote from: ZSHO on July 26, 2016, 05:19:03 PM
The all new FORD PASS your KEY to a new journey,pretty cool and enjoy. Z http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15 (http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15)
Lincoln has had the MyLincoln App for a while that offers those functions, but it appears the fun ones (controlling the vehicle stuff) only works on select '15+ Lincolns. Nothing listed for MKS at all. What I can tell about the Ford one, it only gives the fun functions to '17 Fusion and Escape owners.
I think it comes down to the vehicle has to have a built in modem in order to communicate with the phone for fun stuff.
Please correct me if I'm wrong, because I'd love to have my phone unlock door, start car, etc. What I don't need is an app that tells me where gas stations and dealerships are located.
Quote from: sholxgt on July 26, 2016, 05:30:54 PM
Quote from: ZSHO on July 26, 2016, 05:19:03 PM
The all new FORD PASS your KEY to a new journey,pretty cool and enjoy. Z http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15 (http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15)
Lincoln has had the MyLincoln App for a while that offers those functions, but it appears the fun ones (controlling the vehicle stuff) only works on select '15+ Lincolns. Nothing listed for MKS at all. What I can tell about the Ford one, it only gives the fun functions to '17 Fusion and Escape owners.
I think it comes down to the vehicle has to have a built in modem in order to communicate with the phone for fun stuff.
Please correct me if I'm wrong, because I'd love to have my phone unlock door, start car, etc. What I don't need is an app that tells me where gas stations and dealerships are located.
I still wouldn't mind having it next to my lounge chair and kiddie pool with some frozen cocktails but preferably prefer beer,lol. Z :beer2:
Gotta have it on the luxury models first, right, guys LOL! Next up, Forber for ride sharing :D
Quote from: ZSHO on July 26, 2016, 05:55:59 PM
Quote from: sholxgt on July 26, 2016, 05:30:54 PM
Quote from: ZSHO on July 26, 2016, 05:19:03 PM
The all new FORD PASS your KEY to a new journey,pretty cool and enjoy. Z http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15 (http://view.email-ford.com/?qs=b77ae218c3584f3c60f64ce0632d56b7a6c8f7816ac557d21d21700357b982c6d6fc36ea53bf8957dc30d930e5685daf1ecfaef3bd69b02cdf8bb8974f389d15)
Lincoln has had the MyLincoln App for a while that offers those functions, but it appears the fun ones (controlling the vehicle stuff) only works on select '15+ Lincolns. Nothing listed for MKS at all. What I can tell about the Ford one, it only gives the fun functions to '17 Fusion and Escape owners.
I think it comes down to the vehicle has to have a built in modem in order to communicate with the phone for fun stuff.
Please correct me if I'm wrong, because I'd love to have my phone unlock door, start car, etc. What I don't need is an app that tells me where gas stations and dealerships are located.
I still wouldn't mind having it next to my lounge chair and kiddie pool with some frozen cocktails but preferably prefer beer,lol. Z :beer2:
Thank you for the laugh!
Does your '15 have Sync3? Since Sync3 is capable of updating via wi-fi, maybe there's a way to make it work. The Lincoln Site tells me to "ask a Concierge about activating my modem." Since I have the My Touch version, I know I don't have that option.
I ran into a cooool pic. Z ;)(http://i.imgur.com/XoSmATQh.jpg)
Quote from: ZSHO on July 17, 2016, 02:13:03 PM
Quote from: SHOdded on July 17, 2016, 08:40:02 AM
Do you know if there was any change in formulations. Compared to last year, Z? Costco (top tier) in our area went up from around 1.80 to 2.30 to 2.03 currently.
-MANU sorry for the delay just been busy and all.....IDK any current changes IMHO. Z
Z you have Shell clear flex in CHI town, correct?
I was able to finally gain access to the Module Built Data(As Built)Took less than a minute. Z :) https://www.motorcraftservice.com/AsBuilt (https://www.motorcraftservice.com/AsBuilt)
Quote from: ZSHO on August 15, 2016, 11:22:14 AM
I was able to finally gain access to the Module Built Data(As Built) :) https://www.motorcraftservice.com/AsBuilt (https://www.motorcraftservice.com/AsBuilt)
Why were you unable to gain access before?....why are you looking at the as built data?
Quote from: AJP turbo on August 15, 2016, 11:24:45 AM
Quote from: ZSHO on August 15, 2016, 11:22:14 AM
I was able to finally gain access to the Module Built Data(As Built) :) https://www.motorcraftservice.com/AsBuilt (https://www.motorcraftservice.com/AsBuilt)
Why were you unable to gain access before?....why are you looking at the as built data?
IDK could never gain access in the past(jinx)maybe.
In my older age I have learned getting smashed with premium alcohol leads to a pleasant experience the next morning rather than feeling like death.
Quote from: Vortech347 on August 15, 2016, 04:10:00 PM
In my older age I have learned getting smashed with premium alcohol leads to a pleasant experience the next morning rather than feeling like death.
Please elaborate!! ??? Z
Higher quality liquors; stuff that is more distilled; the less color and impurity the better. This helps prevent the pain and sickness. You still should drink lots of water (1 glass for every drink at least).
That's my random thought, I had a get together with a few friends and we drank quite a bit of Patron tequila. I remember in my 20's getting hammered with plastic bottle stuff, oh lord, the walls wouldn't stop moving!!
Quote from: Vortech347 on August 15, 2016, 04:56:28 PM
That's my random thought, I had a get together with a few friends and we drank quite a bit of Patron tequila. I remember in my 20's getting hammered with plastic bottle stuff, oh lord, the walls wouldn't stop moving!!
I hope you remember where you parked your SHO,LOL,stay/be safe. Z (http://i.imgur.com/qR0Ytu8h.jpg?2)
I think he's on more E than Meth now in his drinks, LOL!
One more random. This was Thursday night.
My wife is in the Cobra, myself in the fox. Both best times of the night were 12.64@120 and 12.91@116.
However when we raced each other I lost 2 tenths at the tree, and a tenth on the 60 with wheel spin. If it wasn't for 550rwhp vs around 520rwhp (I need to re-dyno the Cobra) I would have been screwed. My wife can wheel.
https://youtu.be/9sWZwlYGYng?list=PLq_5ull3kUe9Zeh9_hOKGc2yZ3LoPwDpx
Nothing like good healthy competition to raise the bar :thumb:
Can't ever let your wife beat you in a drag race!!
Here's my SHO waxing a CTS.
https://www.youtube.com/watch?v=q6tKgGaokHI&index=78&list=PLq_5ull3kUe8tbpePTE78PQJWz5T-wejw (https://www.youtube.com/watch?v=q6tKgGaokHI&index=78&list=PLq_5ull3kUe8tbpePTE78PQJWz5T-wejw)
Me VS Shitty driver in a C6
https://www.youtube.com/watch?v=2OaI6ETz5C0&index=17&list=PLq_5ull3kUe8tbpePTE78PQJWz5T-wejw (https://www.youtube.com/watch?v=2OaI6ETz5C0&index=17&list=PLq_5ull3kUe8tbpePTE78PQJWz5T-wejw)
Incar-go pro. Not much action without a man pedal.
https://youtu.be/-U8okYoUq8k (https://youtu.be/-U8okYoUq8k)
[url=http://www.youtube.com/watch?v=q6tKgGaokHI&index=78&list=PLq_5ull3kUe8tbpePTE78PQJWz5T-wejw#]! No longer available] (http://[/url)! No longer available (http://www.youtube.com/watch?v=q6tKgGaokHI&index=78&list=PLq_5ull3kUe8tbpePTE78PQJWz5T-wejw#)
ATTN:All member's just wanted to share a "Random thought" with everyone but especially [new member's]out there and would emphasize that you can away's feel free to ask any question that you may have no matter how small or big it may be you can always feel assured that there is NO such thing as a Dumb question especially here at E.B.P.F and also if you would be kind enough to simply Introduce yourself by following this link and updating your signatures,thanks.:) Z http://www.ecoboostperformanceforum.com/index.php/board,14.0.html (http://www.ecoboostperformanceforum.com/index.php/board,14.0.html)
Quote from: ZSHO on August 16, 2016, 11:19:33 AM
ATTN:All member's just wanted to share a "Random thought" with everyone but especially [new member's]out there and would emphasize that you can away's feel free to ask any question that you may have no matter how small or big it may be you can always feel assured that there is NO such thing as a Dumb question especially here at E.B.P.F and also if you would be kind enough to simply Introduce yourself by following this link and updating your signatures,thanks.:) Z http://www.ecoboostperformanceforum.com/index.php/board,14.0.html (http://www.ecoboostperformanceforum.com/index.php/board,14.0.html)
My mechanic said I need some 710 and my blinker fluid is low, where do I purchase that?
Here, let me point you to our favorite low-price distributor: Peter Pan Inc. Will even put some gleam into your paint for free.
Quote from: Vortech347 on August 16, 2016, 06:05:55 PM
Quote from: ZSHO on August 16, 2016, 11:19:33 AM
ATTN:All member's just wanted to share a "Random thought" with everyone but especially [new member's]out there and would emphasize that you can away's feel free to ask any question that you may have no matter how small or big it may be you can always feel assured that there is NO such thing as a Dumb question especially here at E.B.P.F and also if you would be kind enough to simply Introduce yourself by following this link and updating your signatures,thanks.:) Z http://www.ecoboostperformanceforum.com/index.php/board,14.0.html (http://www.ecoboostperformanceforum.com/index.php/board,14.0.html)
My mechanic said I need some 710 and my blinker fluid is low, where do I purchase that?
No worries,I can definitely hook you up at AA. LMK.
I truly hope any member's from the great state of [Louisiana] and there beloved family's are indeed safe and may God bless you and your family's especially at a crucial time as now and may God Bless you all. Z
Here is a great article on the diffirence's between the PI Utility and PI Civilian. Z Power Takeoff Units
The power takeoff unit (PTU) has been a service concern on some PI Utilities. There may be an excessive oil smell when driving, the AWD may not work properly, or the PTU housing may be cracked, leaking or noisy. The cause of the PTU damage is the excessive torque loading of the idler gear, which causes the bearing to walk (move) into the housing.
In January 2014, a Full Face Thrust Washer, FFTW, was introduced. This new washer was designed to prevent the idler bearing from walking into the aluminum case. In October 2015, a second change was made, in this case a loose-fit idler bearing. In dynamometer tests, this bearing design change showed a twice life improvement over the FFTW design.
In June 2016, a third change was made. In this case, a new bearing design, one without drawn cups, was installed. This eliminated the walk mode of damage. Dyno testing shows a three to four times improvement over the FFTW design. For both the PI Utility and PI Sedan, the PTU is covered under the limited powertrain warranty. All Ford Police Interceptors come standard with a five-year/100,000-mile Extended Service Plan for the powertrain. http://www.hendonpub.com/police_fleet_manager/articles/2016/0708/what_s_new_for_the_2017_ford_police_interceptor_pr (http://www.hendonpub.com/police_fleet_manager/articles/2016/0708/what_s_new_for_the_2017_ford_police_interceptor_pr)
I just saw this blurb on Valvoline's GDI servicing system:
http://easygdi.valvoline.com/ (http://easygdi.valvoline.com/)
https://youtu.be/49JCOKqQcWo (https://youtu.be/49JCOKqQcWo)
https://youtu.be/oxBGkIXP0V0 (https://youtu.be/oxBGkIXP0V0)
-MANU looks like there stepping up there game a bit and great stuff....had mine performed at the dealer on 8/15 by the dates on my pics..Btw just love pic's lol...there is a thread that i posted last year if anyone is interested LMK....think they insert the liquid through the intake plenum and after wipe the TB clean. Z (http://i.imgur.com/M7NP90xh.jpg?1)(http://i.imgur.com/1HNS2C9h.jpg?1)
I do remember your SHO having it done, just not which product was used :) So it's safe to say it works?
IMHO and without getting into the logistics of the matter is does work and safely cleans any carbon buildup and noticed a smoother idle and overall better power and would emphasize only to have it done if you are experiencing a rough idle accompanied by poor gas mileage and loss of power and should only be done on a low mileage vehicle and should be done every 30k basis,think the Ford dealer charged me 89.95 for this procedure and of course there is videos and claims that do not support such procedure or method from being performed but sometimes you need to give it a try especially if there is no other options or alternatives available if done so in a timely manner and only on a last resort basis. Z
The dealership my wife works at does a similar service and recommends the procedure.
I agree with Z and would add that, if it's being done at the dealership and you are under warranty, you don't have much to loose. In the event that it does cause turbo damage (which I believe is the main concern), you still have a warranty in place.
If you do it outside of the dealership and it leads to failure, they could then refuse repair based on the procedure causing the failure. That is of course, if they figure out you had it done.
Well it finally died. The battery died 33 months since the purchase of the car. Think it had a bad cell was only at 10,2 volts and something like 300cca. I have been trying to get a new one for a while as the car would not stay on in accessory mode for more than 10 minute with out a notice about turning car off to save battery power. Anyways. I am not very impressed with ford. This car has had what 6 or 7 recalls and then another new one today. I have had to have my cats replaced. Trans leaked fixed. Suspension work. A part for the HVAC system. Need to take a look at my shocks again as they where starting to leak. And I have this popping noise that is very similar to how a locked diff sounds on dry pavement. Of course this only happens when I have it. The dealer can not reproduce. I need to check to see if I'm getting oil in my spark plug valley again.
How much did you have to pay for out of pocket?
The battery was covered under the 3 year 36k warranty. So I didn't have to pay
Quote from: panther427 on August 25, 2016, 08:42:28 AM
Well it finally died. The battery died 33 months since the purchase of the car. Think it had a bad cell was only at 10,2 volts and something like 300cca. I have been trying to get a new one for a while as the car would not stay on in accessory mode for more than 10 minute with out a notice about turning car off to save battery power. Anyways. I am not very impressed with ford. This car has had what 6 or 7 recalls and then another new one today. I have had to have my cats replaced. Trans leaked fixed. Suspension work. A part for the HVAC system. Need to take a look at my shocks again as they where starting to leak. And I have this popping noise that is very similar to how a locked diff sounds on dry pavement. Of course this only happens when I have it. The dealer can not reproduce. I need to check to see if I'm getting oil in my spark plug valley again.
Definitely feel for ya Panther....but the vehicle will always turn on the battery saver management on the display screen in order to protect itself while in accessory mode after ten minutes,best of luck to ya. Z
How often did you run it for 10 min at a time in ACC mode? Wonder if that helped the battery towards it's demise.
Quote from: ZSHO on August 24, 2016, 09:40:02 AM
IMHO and without getting into the logistics of the matter is does work and safely cleans any carbon buildup and noticed a smoother idle and overall better power and would emphasize only to have it done if you are experiencing a rough idle accompanied by poor gas mileage and loss of power and should only be done on a low mileage vehicle and should be done every 30k basis,think the Ford dealer charged me 89.95 for this procedure and of course there is videos and claims that do not support such procedure or method from being performed but sometimes you need to give it a try especially if there is no other options or alternatives available if done so in a timely manner and only on a last resort basis. Z
^This I just turned over 72K miles and have noticed in the last couple weeks a stumble/rough idle. I was thinking I had a motor mount going out after 70K miles of regularly barking second gear. Since it feels like the whole drivetrain is coming apart every time on a WOT 1-2 upshift I figured the too-soft-from-day-one mounts were giving it up early-ish.
Here are a couple of new video's for ya'll which can be useful on brakes Z [url=http://www.youtube.com/watch?v=q3rBVd3m4iQ#]! No longer available] (http://[/url)! No longer available (http://www.youtube.com/watch?v=q3rBVd3m4iQ#) [url=http://www.youtube.com/watch?v=S-bBdS3YJxY#]! No longer available] (http://[/url)! No longer available (http://www.youtube.com/watch?v=S-bBdS3YJxY#)
Quote from: sholxgt on August 26, 2016, 10:23:36 AM
How often did you run it for 10 min at a time in ACC mode? Wonder if that helped the battery towards it's demise.
personally very rarely. My wife however must do just all the time. Cause she was telling me after the fact the car had been popping up with that info for the last few days before the battery died
If you have Sirius xm radio active they have[travel link]available for free until Labor day weekend,enjoy the free traffic,weather,gas prices,sports updates while it lasts. Z (http://i.imgur.com/VwxMGYWh.jpg?2)(http://i.imgur.com/7CLJPmnh.jpg?2)
Truly one of the best Actor's and will be missed dearly. Z (http://i.imgur.com/q7GzEIPh.jpg) Rest in Peace, Gene Wilder (June 11, 1933 – August 29, 2016)
That's a big loss! He had so many hilarious performances.
^^^ x3.
"Fuzzy wuzzy was a woman!?!?"
RIP Gene :-(
I picked me up a couple of nice size round melons in N.J which were grown in the great State of M.D. Z :)(http://i.imgur.com/XrQaf3Xh.jpg?2)
Watermelon, YUM! We are lucky to have a farm just down the road from us, they grow a lot of stuff right there, and get a lot of fruits from a large orchard not far away (Baugher's). Fresh is the word of the day :)
Has anyone seen this 15 SHO!!!![url=http://www.youtube.com/watch?v=pk4ipj0OHQw#]! No longer available] (http://[/url)! No longer available (http://www.youtube.com/watch?v=pk4ipj0OHQw#)[url=http://www.youtube.com/watch?v=PxP5U2br7jM#]! No longer available] (http://[/url)! No longer available (http://www.youtube.com/watch?v=PxP5U2br7jM#)
Z, details please :)
Completely unacceptable to drive like that, no excuse whatsoever...It actually infuriates me
Quote from: AJP turbo on September 04, 2016, 10:28:43 PM
Completely unacceptable to drive like that, no excuse whatsoever...It actually infuriates me
This is what infuriates me and good luck with the recall. Z (//)
! No longer available (http://www.youtube.com/watch?v=2yIbmCSEA6o#)
Hahaha...... I kind of dig it..... lol
Sent from my SM-N920V using Tapatalk
hhmm...I don't understand that...But I guess I don't have to.....It seems stupid to me. But it also seems stupid when I do burnouts in my mustang....Both things seem pointless but I like burnouts and that's all that matters.
I would've enjoyed it more if one of his windows blew out...Kinda like how I enjoy it when a bull gores a man and when the guy gets his head bit when sticking it in the alligators mouth lol
Lol @ AJP.
Good stuff there Maynard.
Sent from my SM-N920V using Tapatalk
Quote from: ZSHO on September 04, 2016, 11:08:36 PM
Quote from: AJP turbo on September 04, 2016, 10:28:43 PM
Completely unacceptable to drive like that, no excuse whatsoever...It actually infuriates me
This is what infuriates me and good luck with the recall. Z (//)! No longer available (http://www.youtube.com/watch?v=2yIbmCSEA6o#)
That reminds me, I really need to get my sub installed...
Just one sub FoMoCoSHO?
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on September 04, 2016, 11:50:01 PM
Just one sub FoMoCoSHO?
Sent from my SM-N920V using Tapatalk
Yeah, a single 12 for now.
I haven't decided whether Bronzie is staying or not. Probably staying but I thought the same for the 2013 and we see how that turned out.
Until i figure that out I want something simple and trade in friendly so just a sub-amp-LC2I setup for now.
Hopefully it will satisfy my desire for some additional low end.
Quote from: FoMoCoSHO on September 05, 2016, 01:34:24 AM
Quote from: bpd1151 on September 04, 2016, 11:50:01 PM
Just one sub FoMoCoSHO?
Sent from my SM-N920V using Tapatalk
Yeah, a single 12 for now.
I haven't decided whether Bronzie is staying or not. Probably staying but I thought the same for the 2013 and we see how that turned out.
Until i figure that out I want something simple and trade in friendly so just a sub-amp-LC2I setup for now.
Hopefully it will satisfy my desire for some additional low end.
FoMoCo might need to get some Ballistic Door panels depending on the hertz,LOL. Z
Quote from: ZSHO on September 05, 2016, 08:12:12 AM
FoMoCo might need to get some Ballistic Door panels depending on the hertz,LOL. Z
LOL, that's a thought!
Quote from: SHOdded on September 05, 2016, 08:55:21 AM
Quote from: ZSHO on September 05, 2016, 08:12:12 AM
FoMoCo might need to get some Ballistic Door panels depending on the hertz,LOL. Z
LOL, that's a thought!
Don't tempt me.
The way the world is going ballistic panels are just a good idea in general.
LOL
That time of year again! Winter fuel is just around the corner, if not here already:
https://blog.gasbuddy.com/posts/Post-Summer-Driving-Season-Gasoline-Swoon-Coming/1715-653384-3832.aspx
I went to my local convenient store to only see this giant Ford behemoth of a truck parked right next to me and the SHO felt utterly small but all was good. Z (http://i.imgur.com/lbUWmQjh.jpg?1)
LOL! At least his tailpipes are the same size ;)
Quote from: SHOdded on September 15, 2016, 09:32:01 AM
LOL! At least his tailpipes are the same size ;)
True but was more concerned about the size of that Hitch.LOL. Z
ooooooooh yeah, that would definitely be of concern!
Quote from: ZSHO on September 15, 2016, 09:23:34 AM
I went to my local convenient store to only see this giant Ford behemoth of a truck parked right next to me and the SHO felt utterly small but all was good. Z (http://i.imgur.com/lbUWmQjh.jpg?1)
LOL. Just be glad he didn't want your spot!
LOL!
Apparently the F150 is not the only vehicle suffering IC condensation issues:
Cover Plate partially covering Intercooler must be left intact – 2016 Ford Focus RS
oemdtc (http://ford.oemdtc.com/1973/cover-plate-partially-covering-intercooler-must-be-left-intact-2016-ford-focus-rs) July 2, 2016 Info
2016 Focus RS – Cover plate partially covering intercooler must be left intact
2016 Focus RS Intercooler plate which partially covers the intercooler area is necessary for the vehicle.
Do not remove this plate it is required for robust durable function of the vehicle.
Removal may cause water ingestion from normal condensation and result is engine damage.
This morning after dropping off my kids to school ran into my identical twin and after catching up to him at the light found out it was a 2013 non-PP.....made me wonder if that was the same car i traded in,hmmm. Z (http://i.imgur.com/rLVeLO7h.jpg)
Wouldn't that be a lark!
Derive programmer article on PI vehicles. Z http://www.policeone.com/police-products/vehicle-equipment/articles/203094006-How-a-15-minute-fix-can-boost-your-fleets-fuel-economy/ (http://www.policeone.com/police-products/vehicle-equipment/articles/203094006-How-a-15-minute-fix-can-boost-your-fleets-fuel-economy/) http://www.policeone.com/police-products/vehicle-equipment/articles/203095006-How-one-Florida-PD-is-saving-nearly-12-percent-on-fuel/ (http://www.policeone.com/police-products/vehicle-equipment/articles/203095006-How-one-Florida-PD-is-saving-nearly-12-percent-on-fuel/)
"The more that vehicle is on and idling, the more you save," said Tom Kanewske, business development manager for Derive Systems"
ROFL!!! Bet I could save a ton if I just turned the car off!!!
Sent from my SM-G935T using Tapatalk
Quote from: Zorin on September 18, 2016, 09:44:30 AM
"The more that vehicle is on and idling, the more you save," said Tom Kanewske, business development manager for Derive Systems"
ROFL!!! Bet I could save a ton if I just turned the car off!!!
Sent from my SM-G935T using Tapatalk
Definitely funny.....but nothing wrong with informing the community of the latest technologies available on this platform and to contribute. Z :)
Quote from: ZSHO on September 18, 2016, 09:34:17 AM
Derive programmer article on PI vehicles. Z http://www.policeone.com/police-products/vehicle-equipment/articles/203094006-How-a-15-minute-fix-can-boost-your-fleets-fuel-economy/ (http://www.policeone.com/police-products/vehicle-equipment/articles/203094006-How-a-15-minute-fix-can-boost-your-fleets-fuel-economy/) http://www.policeone.com/police-products/vehicle-equipment/articles/203095006-How-one-Florida-PD-is-saving-nearly-12-percent-on-fuel/ (http://www.policeone.com/police-products/vehicle-equipment/articles/203095006-How-one-Florida-PD-is-saving-nearly-12-percent-on-fuel/)
Derive is the parent company of SCT which uses their software.
So for anyone wondering about your tune and warranty, pay close attention to this....
"The software does not affect the manufacturer's warranty, and it utilizes settings already available in the computer system inside the vehicles."
Interesting argument....At first I thought that was just code for "Ford can't tell if you're tuned because we cover our tracks really well", but then it goes on to say the tune can stay on the car for the life of the vehicle.
Did they just tell us how to defend ourselves from tune warranty denial?
Lol, nice...
Sent from my SM-G935T using Tapatalk
Latest update on the pipeline that could affect gas prices in S.east. Z http://abcnews.go.com/US/wireStory/latest-north-carolina-working-replenish-gas-supplies-42191123 (http://abcnews.go.com/US/wireStory/latest-north-carolina-working-replenish-gas-supplies-42191123)
A lot of stations around me are out of fuel.
The station I stopped at only had premium left, so no problem for me :D Hope it gets cleared up soon. Gas prices have already climbed about $.30/gallon.
Nobody wants the situation to escalate to a post-hurricane sandy or even the 70's (shudder). Hope they get it fixed (the right way) within a week. The question is, are there other weak spots waiting their turn? It's like that with the water pipelines in our area.
We keep hearing reports that every thing will be back to normal by mid week (the source probably should have a drug test IMO but we shall see).
sent from my speak n' spell using tin cans and string
i feel sorry for you guys in the southeast with that gas pipeline break. it happened to phoenix back in '03 and lasted about 2 weeks. they had to truck all the gas up from Tucson and I remember hourly updates on the radio telling which stations had fuel. i only had to wait in line once for about 20 minutes but the biggest shock was the price shooting up to $2 :o
I happen to run into some old photos from one of my favorite shows from back in the day and all the vehicles came from a local Ford dealer. Z (http://i.imgur.com/9JiYv9wh.png)(http://i.imgur.com/UEmMdvFh.png) 24 Iconic Ford/Lincoln cars. http://classiccarlabs.com/2015/12/15/24-iconic-cars-you-probably-missed-on-the-andy-griffith-show/ (http://classiccarlabs.com/2015/12/15/24-iconic-cars-you-probably-missed-on-the-andy-griffith-show/) 8)
(http://www.fusionspec.net/uploads/monthly_2016_09/modstuneupmacro.png.305505ebb411cc9b00ecf720f80ea420.png)
I found a pretty cool article on the Utility PI and more. Z Edsel Ford II drive's a Taurus SHO, 8)The most obvious change to the PI Utility with the 3.5L EcoBoost V6 is the unique, blocked-off grille. Looks are deceiving. The grille on the 3.7L PI Utility only appears to be open. It, too, is mostly blocked off behind the grille exterior.
The 3.5L EcoBoost Utility did indeed get a taller, higher flow radiator. The trans cooler was raised slightly to be more in the air flow. The radiators and coolers are stacked one on top of the other, vertically rather than sandwiched one behind the other horizontally.
Other than the radiator and cooler changes, and gobs more torque, the 3.5L EcoBoost PI Utility and the 3.7L Ti-VCT PI Utility are virtually the same vehicle. There was some minor software tuning to the transmission calibration, the stability control parameters, and the AWD engagement parameters. http://www.hendonpub.com/resources/article_archive/results/details?id=4970 (http://www.hendonpub.com/resources/article_archive/results/details?id=4970) Z
I hope everyone and there families will be safe and sound from this Hurricane approaching us very soon and please be careful and stay safe and hopefully we will be unscathed at what mother nature brings us. Z (http://i.imgur.com/HJcdVQZh.jpg)
A lot of evacuations going on from what I hear ...
My parents live right where it's expected to make landfall. Dad has been working non stop for two days in preparation. Storm panels up, generator ready with extra fuel, everything brought in from outside, etc. He even rented a storage unit on higher ground and put my Mom's car in it.
I went through the 3 hurricanes 10 + years ago down there. They are NOT fun! This one looks even nastier.
Hope it dispels quickly and harmlessly!
So you thought your gauges were precision instruments? Well let me awaken you, rudely! Thank goodness the PCM controls combustion a little better than this.
Various 2011- 2015 Vehicles - Cruise Control Speed Setting Display May Not Match Speedometer
Some 2013-2015 Fusion, Taurus, 2011-2015 Explorer, 2013-2014 Edge, Flex, 2013-2015 Lincoln MKS, MKX and 2013-2014 Lincoln MKT, vehicles may exhibit a cruise control
speed that does not match the speedometer speed. The Instrument Panel Cluster (I PC) provides a tolerance which allows the speedometer gauge to display between 3% lower and 7% higher than the actual vehicle speed. This means that with an actual vehicle speed of 96 kmh (60 mph), the speedometer may indicate between 93 kmh (58 mph) and 103 kmh (64 mph), which is normal. Refer to Workshop Manual (WSM), Section 413-01 Description and Operation, Instrument Panel Cluster (IPC). If you are outside of this tolerance range, refer to the WSM for normal diagnosis.
Quote from: SHOdded on October 07, 2016, 02:01:28 AM
So you thought your gauges were precision instruments? Well let me awaken you, rudely! Thank goodness the PCM controls combustion a little better than this.
Various 2011- 2015 Vehicles - Cruise Control Speed Setting Display May Not Match Speedometer
Some 2013-2015 Fusion, Taurus, 2011-2015 Explorer, 2013-2014 Edge, Flex, 2013-2015 Lincoln MKS, MKX and 2013-2014 Lincoln MKT, vehicles may exhibit a cruise control
speed that does not match the speedometer speed. The Instrument Panel Cluster (I PC) provides a tolerance which allows the speedometer gauge to display between 3% lower and 7% higher than the actual vehicle speed. This means that with an actual vehicle speed of 96 kmh (60 mph), the speedometer may indicate between 93 kmh (58 mph) and 103 kmh (64 mph), which is normal. Refer to Workshop Manual (WSM), Section 413-01 Description and Operation, Instrument Panel Cluster (IPC). If you are outside of this tolerance range, refer to the WSM for normal diagnosis.
That is simply ridiculous! I was wondering if my cruise control was faulty or my speedometer because they rarely match. Guess that's why.
That variance is not acceptable however. There are plenty of small towns where that difference could cause a ticketable offense.
Exactly! That variance might have been acceptable 35 years ago ... OBD II/GPS here we come!
I know there have been many negative random thoughts regarding issues with Sync connectivity and it being slow and maybe this might help a bit. LMK. Z BCM 5865 – 2011 – 2013 Vehicles – MyTouch Functional Issues Due To Phonebook Content – Contact Volume
Some MyTouch equipped vehicles may experience multiple functional issues such as slow navigation calculations,
displayed time jump or audio popping during initial ignition on cycle. These conditions can be created by the size
of the contact list within the customer's phone book. The amount of data within the contact list can create a
processing problem for the mobile during a key on cycle. This can be resolved by limiting the number and/or
content within the contact list. In addition, the automatic phonebook download feature can be set to off by
selecting phone, settings, manage phone book, turn auto phone book off. Additional phone contacts can be added
by manually re-downloading phone book in that same menu. Recommend following Workshop Manual section
415-00 for additional diagnostics and ensure a master reset is performed.
I went to N.J to fill up my tank yesterday and to my surprise the gas attendant tells me your gas cap is locked and forgot to bring the new key for my new locking gas cap with me but had 1/4 tank of gas left just to make it home,LOL. Z
Oh yeah, been there before, with wheel locks LOL!
Ahh seafoam! Wish I could do this to the Fusion without worrying about the turbo.
! No longer available (http://www.youtube.com/watch?v=wU9YkeIgk6w#)
As long as one can overlook any of the blood, guts, gore, and possible brain matter.....
Might be a worthy parts car in the making for anyone living in/around CHI-Town.....
(http://i229.photobucket.com/albums/ee231/bpd1151/Miscellaneous/20161012_154046_zpsuh86iuzu.png) (http://s229.photobucket.com/user/bpd1151/media/Miscellaneous/20161012_154046_zpsuh86iuzu.png.html)
Sent from my SM-N920V using Tapatalk
I'd take the trunk and tail lights..
Sent from my XT1650 using Tapatalk
Ford performance power pack that does NOT void warranty and its clear as daylight. Z . Ford Performance is now offering performance-enhancing, warranty-friendly, 50-state-compliant calibrations for 2015 and newer EcoBoost®-equipped Mustang and V8-powered Mustang GT
Ford Performance calibration kit for the 2.3-liter EcoBoost engine boosts peak torque 70 lb.-ft., along with an additional 25 horsepower
Three different performance packages are now available for Mustang GT, providing up to 472 horsepower along with a redline bump and no-lift-shift capability.. DEARBORN, Mich. -- Performance-enhancing calibrations for 2015 and newer Mustang EcoBoost® and Mustang GT now available from Ford Performance Parts provide substantial power gains, are 50-state-compliant and are compatible with the vehicle limited warranty.
The Ford Performance Mustang EcoBoost performance calibration kit for the 2.3-liter EcoBoost engine boosts peak torque 70 lb.-ft. for a total of 390 lb.-ft. of torque, along with a peak 25 horsepower gain for a total of 335 horsepower. Three different performance packages are available for Mustang GT, providing gains of up to 37 horsepower for a peak 472 horsepower in the 5.0-liter V8, while also increasing engine redline and offering no-lift-shift capability.
"Ford Performance Parts is a key part of our product strategy," said Doug White, Ford Performance Parts manager. "Mustang is all about performance, and we know our customers look to us for performance options that are both 50-state-compliant and warranty-friendly." http://performance.ford.com/enthusiasts/media-room/2016/10/ford-performance-power-packages-now-available-for-ecoboost--and-.html (http://performance.ford.com/enthusiasts/media-room/2016/10/ford-performance-power-packages-now-available-for-ecoboost--and-.html)
Hope with the release of the exhaust that we will be getting a calibration update as well
Sent from my Nexus 6P using Tapatalk
Hope this bundle of joy turns our Fusion to the Cold side ...
(http://i1315.photobucket.com/albums/t597/PerfA_ZN0W/Bundle%20of%20joy%20from%20Sagamore%20Hills_zpshyo7lxvr.jpg) (http://s1315.photobucket.com/user/PerfA_ZN0W/media/Bundle%20of%20joy%20from%20Sagamore%20Hills_zpshyo7lxvr.jpg.html)
Quote from: SHOdded on October 28, 2016, 11:10:41 AM
Hope this bundle of joy turns our Fusion to the Cold side ...
(http://i1315.photobucket.com/albums/t597/PerfA_ZN0W/Bundle%20of%20joy%20from%20Sagamore%20Hills_zpshyo7lxvr.jpg) (http://s1315.photobucket.com/user/PerfA_ZN0W/media/Bundle%20of%20joy%20from%20Sagamore%20Hills_zpshyo7lxvr.jpg.html)
Definitely looking forward to your assessment. Z :)
thanks, i will update in probably a month. I have nitro+ in the Fusion right now, ready to refuel in a couple of days. Then I will go back to 87 for 1 tank, about 2 weeks worth. THEN comes the ACES. With winter 87, been getting about 24 mpg with some effort. With winter nitro+, 25.5 mpg. But I want to use 87 on a regular basis, and 93 infrequently. Fingers crossed!
woot! i hit the 12's on my first run of the night. 12.94 @ 105.79 mph. i got a datalog of the run and sent it off to torrie. maybe he'll get me a revision before i leave
Nice work, congrats!
Best run of 12.91 @ 106.5 with a 1.882 60'
Torrie sent me an update as I was waiting in line to stage. I didn't get to download it. The track said they're open next week since the weather is supposed to be nice. I might make it down there again
Even if you had, it may not have given you the best time, it would only FEEL like it was running better, unfortunately. Def hope you can be there next week to set another PB!
I need to get some negative DAs that some of you are getting. 2700ft DA isn't helping me!
Its Daylight savings Time tonight at 2:00 am and maybe we can get some extra sleep time. Z
Congrats and God Bless America. Z :usa: :usa: :usa: :usa: :usa: :usa: :usa:
Make america great
May we all hope that there is not sweeping regulations making everyone on this board panic for new catalytic converters...
Sent from my Nexus 6P using Tapatalk
Quote from: StealBlueSho on November 09, 2016, 12:07:06 PM
May we all hope that there is not sweeping regulations making everyone on this board panic for new catalytic converters...
Sent from my Nexus 6P using Tapatalk
I think we car aficionados won in that regard. Not only do I not see that happening, but we may see a relaxing of the ridiculous CAFE mandates being placed on car manufacturers.
Here is a new video from Ford-tech-mack on tires noises,cupping. Z ! No longer available (http://www.youtube.com/watch?v=S9fckNDy2UI#)
Has anyone seen the Red Line 5W30 Euro-Series Synthetic Motor Oil.IDK. Z Redline euro 5w-30 [/b] product=12304]https://www.redlineoil.com/product.aspx?product=12304 (https://www.redlineoil.com/product.aspx? %20%5Bb) ACEA Service Class C3
API Service Class SN/SM/SL/CF
SAE Viscosity Grade (Motor Oil) 5W30
Vis @ 100°C, cSt 11.6
Vis @ 40°C, cSt 69
Viscosity Index 164
CCS Viscosity, Poise, @ °C 63@-30
Pour Point, °C -45
Pour Point, °F -49
NOACK Evaporation Loss,1hr @ 482°F (250°C), % 6
HTHS Vis, cP @150°C, ASTM D4741 3.7
Redline 5w-30 ACEA Service Class A3 B3/B4
API Service Class SN/SM/SL/CF
SAE Viscosity Grade (Motor Oil) 5W30
Vis @ 100°C, cSt 11.9
Vis @ 40°C, cSt 71
Viscosity Index 166
CCS Viscosity, Poise, @ °C 60@-30
Pour Point, °C -45
Pour Point, °F -49
NOACK Evaporation Loss,1hr @ 482°F (250°C), % 6
HTHS Vis, cP @150°C, ASTM D4741 3.7
https://www.redlineoil.com/product.aspx?pid=2&pcid=21 (https://www.redlineoil.com/product.aspx?pid=2&pcid=21)
The specs are good definitely, but at least in Amsoil's "tests", wear & tear doesn't stack up.
I dont know that i would use euro spec oils...many do but that doesnt always mean its ok..
They have different additive packs
They have a different level of SAP's...sulfated ash, phosphorus...we have different emission equipment and and those will affect them....in amsoil the euro oils are api certified but do not meet ford specs so they are not recommended
Amsoil is good at telling you what oil and viscosity and drain interval wont void your warranty
Wonder why amsoil seems to be the only one that displays the total base number?
Mind....BLOWN!
https://www.youtube.com/watch?v=S3cFfM3r510 (https://www.youtube.com/watch?v=S3cFfM3r510)
Quote from: sholxgt on November 12, 2016, 05:34:49 PM
Mind....BLOWN!
https://www.youtube.com/watch?v=S3cFfM3r510 (https://www.youtube.com/watch?v=S3cFfM3r510)
That was very cool tech!
Sent from my XT1096 using Tapatalk
Quote from: sholxgt on November 12, 2016, 05:34:49 PM
Mind....BLOWN!
https://www.youtube.com/watch?v=S3cFfM3r510 (https://www.youtube.com/watch?v=S3cFfM3r510)
https://youtu.be/FJXgKY2O4po
Sent from my Nexus 6P using Tapatalk
OK: So i have parked my 2011 SHO with Blown Turbos (to be repaired when i get the lift installed) , Sold My Winter Ride, and Low and Behold, I found a 2010 SHO with 47K on the Clock, Looks Like PP, with 20's, and the price is right, Trying to run the Window Sticker (for 2 days) also ran my 2011, that i was able to get one when i bought it, but the Site says Check back later. Any Suggestions from the group would be appreciated... ;D
HEY.. I figured it out,
Just ordered it from Ford Racing,
as usual, a little more reading,
and we are all good...
WELL I am now a NEW/Used owner of a 2010 SHO, With 20" from the factory, Still Confused if this is a PP, as A Run Sheet from a Ford DEALER, says 2.77 Ratio, But as this is now my winter Ride, I guess I do not Care, The Window Sticker is 2-3 Weeks Away, and i had Ford Performance
read me the Options 20" Wheels were 695.00 ADD, SO,
IN 2010 CAN you Get 20" with the 2.77 Axle Ratio.....?
47K Miles, Pearl White, All the Options At the Time, Real Clean for 16K out the Door..???
So is congrats in order new ride and all? Count youself among the lucky who can get a certificate, 14 and up are still SOL.
I was truly hoping the one and only BiGMaC would finally make his return to our forum and truly miss his presence and insight,fingers crossed. Z
Life's been keeping him busy from what I understand. Work & family & being a grandfather etc ...
Our 13 SHO, I park the SHO in the garage and secure it completely. When I come out the next morning the front windows and sunroof are open. We thought the remote was hitting something in the wife's purse or while in my pocket. So we put the remotes away from everything and it still occurs. While it was parked in the garage, we went on a trip in the fusion, and when we returned the windows were open and the remotes were hidden away in the house. Has anybody else had this problem? The SHO just went over 18k and is out of the 36mo warranty. Thanks
It happened to me once while it was snowing and it surely wasnt a pleasant experience.....Did you try turning off the remote function for the windows on the left side of the instrument cluster? Z
Are you still on the original battery, or did you have it replaced (car battery)?
I will try turning off the global window feature. Yes it is the original battery. I would hope that FORD was not that dumb to have the windows come down when the battery grows weak. My past fords the drivers door would unlock on a weak or dead battery. I will have the battery checked. Thank you both for a quick response.
I am hoping for the simple solution :) But yeah, unfortunately or fortunately, a strong battery is a survival tool ...
I was curious to know where some of you get your aftermarket custom oil caps,rad caps etc and tried Ford racing but it was a no-go,basically looking for some additional eye candy,thanks. Z
Here's some cool gadgets that will boost your holidays. Z :)
https://boostnatics.com/collections/frontpage/products/boostnatics-rechargeable-electric-turbo-lighter-black?variant=8230293633
Free shipping included.
That thing is awsome lol
All I want for Christmas is more boost and spark....
SantAJP said you'll shoot your rods out.
Quote from: FoMoCoSHO on December 10, 2016, 08:25:45 PM
All I want for Christmas is more boost and spark....
SantAJP said you'll shoot your rods out.
That's some funny stuff right there lol.
I'm watching that movie with my 6 yo daughter right now.
(http://uploads.tapatalk-cdn.com/20161211/94d4487f3b3e360813786cab1f6df19a.jpg)
A good [left leaning] friend of mine offered me an extra ticket to the Trump rally in SE Wisconsin tonight. If I don't make it out alive, it was good getting to know you guys over the past few months. :)
I've never been to a political rally in my life, but I have been to monster truck rallies and tractor pulls... I'm guessing not a uuuuuuge difference. :P
Sent from my iPhone using Tapatalk
Quote from: MiWiAu on December 13, 2016, 02:08:25 PM
A good [left leaning] friend of mine offered me an extra ticket to the Trump rally in SE Wisconsin tonight. If I don't make it out alive, it was good getting to know you guys over the past few months. :)
I've never been to a political rally in my life, but I have been to monster truck rallies and tractor pulls... I'm guessing not a uuuuuuge difference.
Sent from my iPhone using Tapatalk
Make America Great Again baby!!
I just wanted to take the time and Welcome the crew over at the SHO/MKS/SPORT Forum to our side and honestly will be an honor to have some great members who have pioneered the Ecoboost platform join us once again. :thankyou: Z
Heartily seconded!
I just received a major award but its FRA-GEE-LAY. LOL. Z
Merry Christmas.
(http://i.imgur.com/gaOC6lUh.jpg)
(http://i.imgur.com/ODEuLlsm.jpg)
Quote from: ZSHO on December 21, 2016, 09:19:54 PM
I just received a major award but its FRA-GEE-LAY. LOL. Z
(http://i.imgur.com/gaOC6lUh.jpg)
(http://i.imgur.com/ODEuLlsm.jpg) would like to drink beer with some of you dudes one day. LOL
Sent from my iPhone using Tapatalk :beer2:. Z
Has any one seen this article on Roush fuel system Diagnostics? Z
2011-2014
http://www.roushcleantech.com/wp-content/uploads/sites/all/themes/roushcleantech/pdf/diagnosticmanuals/2014_RCT_Diagnostics_Manual_AUG2014.pdf (http://www.roushcleantech.com/wp-content/uploads/sites/all/themes/roushcleantech/pdf/diagnosticmanuals/2014_RCT_Diagnostics_Manual_AUG2014.pdf)
Found this gem during my clean out of crap from my basement... had it on my 2004 VW Jetta GLI....
(https://uploads.tapatalk-cdn.com/20170125/41ef030594c45264b1c767bc0e7d982f.jpg)
Sent from my iPhone using Tapatalk
Quote from: gladams on November 25, 2016, 10:47:55 AM
I will try turning off the global window feature. Yes it is the original battery. I would hope that FORD was not that dumb to have the windows come down when the battery grows weak. My past fords the drivers door would unlock on a weak or dead battery. I will have the battery checked. Thank you both for a quick response.
New battery, all is ok now. Thanks for the input from the members.
Quote from: gladams on January 25, 2017, 11:57:01 AM
Quote from: gladams on November 25, 2016, 10:47:55 AM
I will try turning off the global window feature. Yes it is the original battery. I would hope that FORD was not that dumb to have the windows come down when the battery grows weak. My past fords the drivers door would unlock on a weak or dead battery. I will have the battery checked. Thank you both for a quick response.
New battery, all is ok now. Thanks for the input from the members.
Great to hear everything went smooth & without a hitch. Z :)
Quote from: gladams on January 25, 2017, 11:57:01 AM
New battery, all is ok now. Thanks for the input from the members.
Full power restored, woohoo!
I just wanted to take the time and opportunity say that being part of this fine forum has been a great and memorable experience by far but in the meantime while undergoing therapy for quite sometime it has come to my attention that the time has come to unfortunately acknowledge & disclose to my friends and confess that i've never setup my very own INTRO thread. Z :P
Quote from: ZSHO on January 26, 2017, 10:59:05 PMIt has come to my attention that the time has come to unfortunately acknowledge & disclose to my friends and confess that i've never setup my very own INTRO thread. LMAO. Z :P
AWE.....!!! Bad, naughty moderator!
30 cain'ings for you young man!
Or I'll let everyone borrow my TASER as an alternative form of punitive punishment.
Hahahaha.
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on January 26, 2017, 11:02:33 PM
Quote from: ZSHO on January 26, 2017, 10:59:05 PMIt has come to my attention that the time has come to unfortunately acknowledge & disclose to my friends and confess that i've never setup my very own INTRO thread. LMAO. Z :P
AWE.....!!! Bad, naughty moderator!
30 cain'ings for you young man!
Or I'll let everyone borrow my TASER as an alternative form of punitive punishment.
Hahahaha.
Sent from my SM-N920V using Tapatalk
I would rather prefer a good ole fashion lashing.LOL. Z
Ha!
And your preferences should be being taken into consideration on this?
I think the community decides. Lololol.
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on January 26, 2017, 11:18:31 PM
Ha!
And your preferences should be being taken into consideration on this?
I think the community decides. Lololol.
Sent from my SM-N920V using Tapatalk
Mike U R the man,Thanks buddy. Z :)
All in good fun.
Part of what makes this place so cool.
Thanks for your work, even whilst working through all that therapy.
Now get back to work!
Sent from my SM-N920V using Tapatalk
Just a quick shout out to SHOdded, ZSHO, FoMoCoSHO, and any other moderators who spend the time(unpaid!!!) to keep these forums informative, clean, and on track. Really helps keep this a great place to learn and grow!! Thank you!
(I'm in good mood today so bite me..)
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on January 27, 2017, 09:11:39 AM
Just a quick shout out to SHOdded, ZSHO, FoMoCo, and any other moderators who spend the time(unpaid!!!) to keep these forums informative, clean, and on track. Really helps keep this a great place to learn and grow!! Thank you!
(I'm in good mood today so bite me..)
Sent from my iPhone using Tapatalk
Thanks so much and must admit the
E.B.P.F is by far the BEST Forum around and honestly is the only Forum i have joined with the exception of the SHO/MKS/SPORT PRO-BOARDS which was on a very limited basis and unfortunately & ultimately had to come to a close. Z
I just realized how ironic it is that I work in development of controls strategies for after cat O2 sensors/catalyst monitoring/general emissions diagnostics yet both of my cars run catless pipes
Must be some insider knowledge prompting you to run catless pipes :D
I was taking my kids to school this morning and happen to run into a new Continental with TLC plates and wouldn't mind to be driven in one of those,lol.
(http://i.imgur.com/1kRy1uAh.jpg)(http://i.imgur.com/N1VLgNbh.jpg)
Ford GT Excels in Water and Splash Test | Ford GT | Ford Performance new video,enjoy. Z
[url=http://www.youtube.com/watch?time_continue=5&v=oRsZxdNkdLw#]! (http://[/url)! (http://www.youtube.com/watch?time_continue=5&v=oRsZxdNkdLw#)
I was parking my car this morning in the street while trying to remove some snow/ice that was trapped between the wheel well while at the same time a brand new Cadillac parks and backs up into me and said WTF.
I noticed it was an older gentlemen with Vietnam veteran plates and without any such remorse excused him since there was no evident damage done and saluted him. Z :salute:
Sh$t happens :( Got used to it when I parked at the Metro garages taking the train to work.
Quote from: SHOdded on February 11, 2017, 12:51:22 PM
Sh$t happens :( Got used to it when I parked at the Metro garages taking the train to work.
Up in MD and in VA those Metro garages are where cars go to die....
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on February 11, 2017, 01:10:39 PM
Up in MD and in VA those Metro garages are where cars go to die....
Truth!
2013-2016 FOCUS ST MOUNTUNE TRIPLE PASS RADIATOR UPGRADE.
I wish this upgrade was available for this platform. Z
CLICK on similar parts.
https://performanceparts.ford.com/part/MP2546-12020-AA1?cks=432128850&emailid=FP_FASTNEWS
Damn 8in thick radiator if you install a air to water intercooler it maybe possible to fab it up.
Sent from my Nexus 6P using Tapatalk
Seat filter with filter element FS104
Seat filter with no filter element FS106
Choice!
Topic re: adding nitrous boost to a tuned car moved here
http://www.ecoboostperformanceforum.com/index.php/topic,7487.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,7487.0.html)
Are there any paint & body (not body paint) experts in the house?
My Explorer is covered in orange peel, and I'm wondering if there is a general consensus regarding the ability for Ford OEM clearcoat to withstand some minor corrections to reduce the severity of said orange peel.
Sent from my iPhone using Tapatalk
Quote from: MiWiAu on February 27, 2017, 10:38:53 AM
Are there any paint & body (not body paint) experts in the house?
My Explorer is covered in orange peel, and I'm wondering if there is a general consensus regarding the ability for Ford OEM clearcoat to withstand some minor corrections to reduce the severity of said orange peel.
Sent from my iPhone using Tapatalk
My buddy at work had that happen to his explorer... ford would not cover it and said they would need to a total repaint to fix it.
Hers was really bad though.
You can get a paint meter to figure out total paint thickness, but if you are only using finishing polish, i.e., single pass type polishing, clearcoat should be able to withstand it no problem. Adding a product like CQuartz Deluxe on top is like adding a couple of layers of clearcoat, so you could wind up with even better paint depth than you started with.
Quote from: SHOdded on February 27, 2017, 11:51:01 AM
You can get a paint meter to figure out total paint thickness, but if you are only using finishing polish, i.e., single pass type polishing, clearcoat should be able to withstand it no problem. Adding a product like CQuartz Deluxe on top is like adding a couple of layers of clearcoat, so you could wind up with even better paint depth than you started with.
I found these the other day. Was considering a CarPro velvet pad with some abrasive compound using a DA polisher.
http://www.autogeek.net/orange-peel-removal-pad.html
Supposed to be roughly equivalent to 3000 grit. Lots of positive reviews on the interwebs of people using it on factory clears (in general, not necessarily Ford specific).
I wonder if a body shop would measure my paint thickness for me in a few spots. I don't really want to spend $400 on my own meter... Nor do I want to spend $5k on a new paint job. LOL.
EDIT: Hmmm... the paint meters only measure the total thickness of the coating on the metal, correct? I don't think there's a way to measure the clear thickness directly?
Sent from my iPhone using Tapatalk
At least the layman's meters will not measure clear coat thickness directly. Some will measure paint thickness only on metal, while others will work with plastic as well. Check eBay for reasonably priced meters.
As far as pads, many options. Maybe you want microfiber, maybe wool. Join live2detail.com and ask there. It is one of the best detailing sites I have seen, lots of quality pros on there.
Does anyone know what this is ? Take a guess.!! Z
(http://i.imgur.com/lszuSs0h.jpg?1)
Coca cola? Medical intern's coffee? :P
Quote from: SHOdded on March 11, 2017, 08:37:14 AM
Coca cola? Medical intern's coffee? :P
Its Natural!!. Z
Here in the North east were getting hit pretty hard with freezing rain,snow,ice,blizzard type conditions so please due stay safe and take the necessary precautions my fellow Ecoboosters. Z
(http://i.imgur.com/N0IMezmh.jpg)(http://i.imgur.com/5X8a15Ch.jpg)
I had to take my daughter to school this morning and in the heat of the moment could not remove the frozen solid ice on top of the hood and certainly did not want to damage the paint or crack the windshield again but felt like a Big Boob driving around with the wipers sticking up but must admit it did gain some attention. LOL.
I guess stupid things we do while being in a rush.
I later poured a couple of gallons of hot water and Bam worked like a charm. Z
(http://i.imgur.com/NguIbbIh.jpg)(http://i.imgur.com/qQTT0lnh.jpg)
Woulda felt like The Tick if The Tick wore red LOL
(http://4.bp.blogspot.com/-vlqwsh8tVPY/TwT6rIqZPTI/AAAAAAAAAvM/WH0kSHfyzpQ/s1600/The-Tick.jpg)
Yummy nugget for the day: Megan Fox is the new "Global Ambassador" for Frederick's of Hollywood.
Sent from my iPhone using Tapatalk
Quote from: MiWiAu on March 15, 2017, 11:39:20 AM
Yummy nugget for the day: Megan Fox is the new "Global Ambassador" for Frederick's of Hollywood.
Sent from my iPhone using Tapatalk
I would be excited if she still looked natural... now that you can melt her down into legos, she has lost her appeal IMHO...
Yeah she was hot in transformers but they all said how uncomfortable she was being a sex object and she had self esteem issues so this is wierd...but id hang out in the back seat of an ecoboost with her for 5 or 10 minutes
Quote from: AJP turbo on March 15, 2017, 01:18:46 PM
Yeah she was hot in transformers but they all said how uncomfortable she was being a sex object and she had self esteem issues so this is wierd...but id hang out in the back seat of an ecoboost with her for 5 or 10 minutes
Yea.. well... after a few kids and a small army of doctors all up in her junk if she is like most moms I know including my wife then the self consciousness issue tends to be a non issue...
Now I'm sure she is doing the whole "I had three kids and look at me know!" Crap...
I used to be a GT in real life now I am a Taurus LOL
Quote from: SHOdded on March 15, 2017, 07:34:01 PM
I used to be a GT in real life now I am a Taurus LOL
Ha! Wrong time to mention to the GT you are now faster and improved?
LOL!
Taking my daughter to gymnastics in the 1.5L Ecoboost...
"Daddy, hit the rocket boosters!!!"
I floor the escape...
"Daddy your being silly, hit the rocket boosters!!!!"
I floor it again...
"Daddy this is the worst day ever.. no duck duck song and no rocket boosters..."
She is 3..... lol
LOLOLOLOL
Quote from: StealBlueSho on March 16, 2017, 06:33:41 PM
Taking my daughter to gymnastics in the 1.5L Ecoboost...
"Daddy, hit the rocket boosters!!!"
I floor the escape...
"Daddy your being silly, hit the rocket boosters!!!!"
I floor it again...
"Daddy this is the worst day ever.. no duck duck song and no rocket boosters..."
She is 3..... lol
Next time you gotta say "VROOOOOOOOOOOOM PSSSHHHHHH" a few times when you mash the gas.
Here are a couple of new cool cooling vid's from FordtechMack. Z :)
(ftp://www.youtube.com/watch?v=4gk4xb9aOgE#)! No longer available (http://www.youtube.com/watch?v=4gk4xb9aOgE#)
ftp:// (http://www.youtube.com/watch?v=MijOO-KGCY4#)
Thinking about a Small Rubber Seal for the Snout of the M Design Air Intake,
Also an insulated Cool Bag to Wrap the Filter Housing With (Filled w Dri Ice)...?
Mr Rock & Roll Legendary Chuck Berry will certainly be missed. Z
(http://i.imgur.com/2WQQmgnh.jpg)
RIP 1926-2017
Good ole age for a farewell! RIP, CB!!!
Quote from: ZSHO on March 18, 2017, 07:20:48 PM
Mr Rock & Roll Legendary Chuck Berry will certainly be missed. Z
(http://i.imgur.com/2WQQmgnh.jpg)
RIP 1926-2017
I worked with his son-in-law, Chuck Clay, who was also a musician back around 2000 until he passed. He brought pop's to one of our Christmas Parties to play with him and I honestly have to say he came across as a nice approachable old guy at the time. I actually have a guitar pick he gave me that night. Got to respect a guy that loved what he did and was still kicking it up to the day he died. RIP to both Chuck's, makes me miss the old days.
Chevy SS has production numbers BY MONTH thru 2/17. WHY can't ford tell us how many SHOs have been made?
Quote from: EAST TX SHO on March 21, 2017, 07:34:23 PM
Chevy SS has production numbers BY MONTH thru 2/17. WHY can't ford tell us how many SHOs have been made?
They probably need a good swift kick in the ass. IDK. Z
Quote from: ZSHO on March 21, 2017, 07:54:34 PM
Quote from: EAST TX SHO on March 21, 2017, 07:34:23 PM
Chevy SS has production numbers BY MONTH thru 2/17. WHY can't ford tell us how many SHOs have been made?
They probably need a good swift kick in the ass. IDK. Z
Woah!!! Z said a bad word.....quick someone edit it before he realizes what he did!!!!
Quote from: ZSHO on March 21, 2017, 07:54:34 PM
Quote from: EAST TX SHO on March 21, 2017, 07:34:23 PM
Chevy SS has production numbers BY MONTH thru 2/17. WHY can't ford tell us how many SHOs have been made?
They probably need a good swift kick in the ass. IDK. Z
Ha! I love it.
Likely very true.
Nice to see Z step'n out of his shell, even if just a lil bit.
Thata boy Z! **applause**
Sent from my SM-N920V using Tapatalk
Quote from: ZSHO on March 21, 2017, 08:56:39 PM
Quote from: StealBlueSho on March 21, 2017, 08:38:43 PM
Quote from: ZSHO on March 21, 2017, 07:54:34 PM
Quote from: EAST TX SHO on March 21, 2017, 07:34:23 PM
Chevy SS has production numbers BY MONTH thru 2/17. WHY can't ford tell us how many SHOs have been made?
They probably need a good swift kick in the ass. IDK. Z
Woah!!! Z said a bad word.....quick someone edit it before he realizes what he did!!!!
Smart ass. Z :P
Ha!!! Lightening does strike twice!!
Quote from: ZSHO on March 21, 2017, 08:56:39 PM
Quote from: StealBlueSho on March 21, 2017, 08:38:43 PM
Quote from: ZSHO on March 21, 2017, 07:54:34 PM
Quote from: EAST TX SHO on March 21, 2017, 07:34:23 PM
Chevy SS has production numbers BY MONTH thru 2/17. WHY can't ford tell us how many SHOs have been made?
They probably need a good swift kick in the ass. IDK. Z
Woah!!! Z said a bad word.....quick someone edit it before he realizes what he did!!!!
@ StealBlueSho Smart ass. Z :P
Putting the 1.5l ecoboost in sport mode to merge... it's like a giant wet fart...
Quote from: StealBlueSho on March 22, 2017, 09:04:45 AM
Putting the 1.5l ecoboost in sport mode to merge... it's like a giant wet fart...
the 2.0L in sport has some bite at the low speed/low load condition (squeals the 19's on the fusion)...I miss the SHO pulling like a train at 70+ mph :/
Quote from: StealBlueSho on March 22, 2017, 09:04:45 AM
Putting the 1.5l ecoboost in sport mode to merge... it's like a giant wet fart...
But you enjoyed it though.....it gave you a sensation of power that the sho just doesnt have lol
New video from Ford Tech Mack pertaining to the F-150 and EX.enjoy. Z :)
ftp://! No longer available (http://www.youtube.com/watch?v=Sd-0tit_ZAI#)
Is summer gas here already? Sure feels like it ...
Quote from: SHOdded on March 29, 2017, 05:38:35 PM
Is summer gas here already? Sure feels like it ...
Agreed,felt a bit of more pep since last fill up on Sunday. :)
Man so had to come back home early but I've been driving a 2015 Silverado diesel the gas and break felt so heavy took me about 200 miles before I got comfortable with it.
Just got home took the sho to McDonald's the steering g super light the break super sensitive and the gas peddle begging to be kept floored but my wife wanted to get out of the house with the baby so I had to try and stay out of it so hard to do first little pos Pontiac that wanted to cut me off I was on their butt.
Ahhh I missed my sho sooo much specially ably allowed to drive 50 with something that feels so heavy
Sent from my Nexus 6P using Tapatalk
Sometimes it's like a one night stay at a motel/hotel. Just can't get the right position to sleep in, even if it is a "sleep comfort" bed.
What's the point in owning a fast car in NoVA.... unless you are on the road between 8PM - 4AM you don't get to open it up...
Quote from: StealBlueSho on April 03, 2017, 08:31:37 AM
What's the point in owning a fast car in NoVA.... unless you are on the road between 8PM - 4AM you don't get to open it up...
Wait a minute. You don't have traffic 24/7??? Maybe I should move there, LOL.
Oh no we do.. but it opens up enough so you can change lanes during those hours without too much effort. Ha!
I see ... I see ... No Frogger btwn 8 PM and 4 AM. Must be nice. We do have a couple of roads nearby where traffic moves in the "HIGH teens" ;) but cops are always trying to spoil the fun LOL, as well they should.
Yea... I live of 29 in VA... nothing moves fast..
Here is a brand new video from Ford-tech Mack on how to Diagnose a Sticking Brake Caliper w/ One Simple Test. Z
ftp://http://youtu.be/d3tVUo9bI1M (http://youtu.be/d3tVUo9bI1M)
Apparently kite flying in your 30's can be considered an extreme sport... not suppose to drive either.... I told the Dr to go pound sand on that one... Ha!
(https://uploads.tapatalk-cdn.com/20170410/22d753dcc8ce48bc7086b34d74eb500e.jpg)
Quote from: StealBlueSho on April 10, 2017, 07:40:09 PM
Apparently kite flying in your 30's can be considered an extreme sport... not suppose to drive either.... I told the Dr to go pound sand on that one... Ha!
(https://uploads.tapatalk-cdn.com/20170410/22d753dcc8ce48bc7086b34d74eb500e.jpg)
You buggy or boarding? Looks like Kiteboard injury to me..... Gotta watch out for those gusts!
Oooo not good.
I know there is always mention of checking the rear turbo hose/pipe becoming loose highlighted in red but sometime's we neglect to check the hose/pipe clamp highlighted in blue to make sure its nice and tight. Z
(http://i.imgur.com/Lji9OIUh.jpg?2)(http://i.imgur.com/TJ6zhTLh.jpg)
Feel free to use the pic. Z
Quote from: StealBlueSho on April 10, 2017, 07:40:09 PM
Apparently kite flying in your 30's can be considered an extreme sport... not suppose to drive either.... I told the Dr to go pound sand on that one... Ha!
(https://uploads.tapatalk-cdn.com/20170410/22d753dcc8ce48bc7086b34d74eb500e.jpg)
The good part is your a young Buck and should recover in no time with a couple of Tweaks to the base cal.
On a serious note know the exact feeling when i fractured my fibula right in the middle of summer and ended up wearing a Splint for 3 months and indeed was painful and hopefully yours is not fractured/broken and hoping for a speedy recovery my friend. Z
Quote from: ZSHO on April 11, 2017, 07:48:29 AM
I know there is always mention of checking the rear turbo hose/pipe becoming loose highlighted in red but sometime's we neglect to check the hose/pipe clamp highlighted in blue to make sure its nice and tight. Z
(http://i.imgur.com/Lji9OIUh.jpg?2)
Love this bank 1 picture! Looks different when your on a creeper... lol...
Thanks Z!!
Where's my car?
Lol....
I'd be more worried about whether the engine bay is empty, we still don't know how this pic was taken ...
Quote from: ZSHO on April 11, 2017, 07:48:29 AM
I know there is always mention of checking the rear turbo hose/pipe becoming loose highlighted in red but sometime's we neglect to check the hose/pipe clamp highlighted in blue to make sure its nice and tight. Z
(http://i.imgur.com/Lji9OIUh.jpg?2)(http://i.imgur.com/TJ6zhTLh.jpg)
Feel free to use the pic. Z
Do you have more pictures of the motor ?
Sent from my Nexus 6P using Tapatalk
Here are a couple of pics for anyone interested. :) Z
(http://i.imgur.com/LfEvXo7h.jpg)(http://i.imgur.com/TJ6zhTLh.jpg) :)
Feel free to copy it.
I've had an intermittently squeaky belt for the last ~10k miles that I believe to be from some oil reside contamination following an engine cleaning after I found oil leaking out of my throttle body connection (I also cleaned my CAC, intake and installed an OCC at the time).
I purchased a replacement belt, but decided to try some SilGlyde as a quick fix for poops and giggles. A dime size dab on each side of the belt, and it was dead silent... for 3 days.
After a week, the squeak/squeal is substantially worse now, and it never really goes away (as it did before after warming up).
New belt goes on this weekend sans SilGlyde. :)
Sent from my iPhone using Tapatalk
ah magical creams and fairie dust ...
Click below to download your free 2018 Ford Mustang ringtone!!!. Z :)
Android Devices
https://soundcloud.com/fordmotorcompany/mustang-exhaust-ringtone
Apple iphone.
https://soundcloud.com/fordmotorcompany/mustang-exhaust-ringtone
https://social.ford.com/en_US/story/vehicle-type/performance/you-need-this-free-mustang-ringtone.html
Where is our SHO ringtone?! ;-)
Hmmm 3 coronas in... Snow stage 1 and Snow stage 2 in my cart... choices choices choices......... not gonna use the progressive features of the stage 2..... but I do like the boost gauge/controller and bigger pump.....
Well s*** or get off the pot...why snow?..wasnt there customer service and warranty details a problem ? I remember a member here got screwed..scoles maybe?
Quote from: AJP turbo on April 14, 2017, 08:52:43 PM
Well s*** or get off the pot...why snow?..wasnt there customer service and warranty details a problem ? I remember a member here got screwed..scoles maybe?
Yea... he opened his controller though and broke the warranty void sticker. Apparently they are sticklers for that....
Not interested in alky kits...
AEM is interesting though...
Snow has a pretty good reputation though...
I was curious if anyone attempted or thought of installing a light inside the glove compartment and kinda feel left in the dark without it. Z
A couple people are going to try it in their Edge, kind of copying MKX design.
Quote from: AJP turbo on April 14, 2017, 08:52:43 PM
Well s*** or get off the pot...why snow?..wasnt there customer service and warranty details a problem ? I remember a member here got screwed..scoles maybe?
I have read that too, pumps failing and not wanting to cover under warranty.
Sent from my iPhone using Tapatalk
Quote from: ShoBoat on April 23, 2017, 11:01:50 AM
Quote from: AJP turbo on April 14, 2017, 08:52:43 PM
Well s*** or get off the pot...why snow?..wasnt there customer service and warranty details a problem ? I remember a member here got screwed..scoles maybe?
I have read that too, pumps failing and not wanting to cover under warranty.
Sent from my iPhone using Tapatalk
If you pay less than MSRP for the kits then they don't warranty it... crappy business model but it is what it is... all kits have pumps that fail...
Found this gem today
http://carperformance.se/?product=taurus-sync-3-android-system
Sent from my Nexus 6P using Tapatalk
Have a android os so that you can run mirroring from your phone
All I see is a neater tq screen
New Video from FordTechMakuloco on 2013-2017 Ford 1.6L GTDI Ecoboost Engine: Spark Plug Replacement,hope it helps someone out. Z :)
ftp://! No longer available (http://www.youtube.com/watch?v=lxBtq2dGmWM#)
Let's go Caps!!!!!
Hope they don't go Cap-ut ... nephew would be xtremely disappointed.
Quote from: StealBlueSho on May 03, 2017, 08:22:21 PM
Let's go Caps!!!!!
What happened...not looking good buddy..wonder why they suck so bad?
Yea......
Test drove a srt8 charger and a fusion sport today......
Fusion sport was way too tame.... and road noise was pretty significant..
Charger was fun to drive... but felt really cheap inside....
Here a New Vid from FordTechMakuloco on Ford Taurus 3.0L 24v DOHC: $6 FIX for High Idle and Excessive Oil Consumption Concerns,hope this helps the earlier GEN and Newer out Z. :) ftp://! (http://www.youtube.com/watch?v=RzbGMve5Pv4&feature=youtu.be#)
Quote from: StealBlueSho on May 04, 2017, 02:49:04 PM
Test drove a srt8 charger and a fusion sport today......
Charger was fun to drive... but felt really cheap inside....
That mimics my thoughts on the dodge/chrysler offering. I have checked out Chargers (and 300's) the last 3 times I have looked at buying a new vehicle. Every time the interior just felt lacking compared to other brands. I really like the looks of the chargers too, they always catch my eye on the road, but that interior.. BLEH!
https://amazingreveal.com/blog/2017/05/12/a-day-on-the-track-with-the-ridiculous-2017-ford-gt-supercar/ (https://amazingreveal.com/blog/2017/05/12/a-day-on-the-track-with-the-ridiculous-2017-ford-gt-supercar/) .Z
ftp://!(http://i.imgur.com/q37VQMC.gif) (http://www.youtube.com/watch?v=68Ty8X1kE0s#)
https://www.google.com/amp/s/www.geekwire.com/2017/massive-cyberattack-hits-99-countries-reportedly-using-stolen-nsa-tools-to-take-advantage-of-microsoft-vulnerability/amp/ (https://www.google.com/amp/s/www.geekwire.com/2017/massive-cyberattack-hits-99-countries-reportedly-using-stolen-nsa-tools-to-take-advantage-of-microsoft-vulnerability/amp/) .Z
:minigunner:
A real problem.
Honestly, I am surprised this has not happened sooner....
CodeRed was bigger though..
Quote from: ZSHO on May 13, 2017, 07:42:14 AM
https://www.google.com/amp/s/www.geekwire.com/2017/massive-cyberattack-hits-99-countries-reportedly-using-stolen-nsa-tools-to-take-advantage-of-microsoft-vulnerability/amp/ (https://www.google.com/amp/s/www.geekwire.com/2017/massive-cyberattack-hits-99-countries-reportedly-using-stolen-nsa-tools-to-take-advantage-of-microsoft-vulnerability/amp/) .Z
:minigunner:
Key for information keep your computer updated so hard for business to do so because often the updates break things software they need.
Sent from my Nexus 6P using Tapatalk
-MANU (SHOdded) Congrats on your 11,000 post. Z :thumb: :thumb:
Truly Superb from A-Z. :thankyou:
I noticed today Travel link is active for any members with Sirius-XM until Memorial Day weekend,enjoy. Z :)
New Video on Ford Quick Tips #76: Door Ajar Switch Testing and Replacement which applies to many Ford Explorer's-150'S and more. Z
(http://www.youtube.com/watch?v=HyTFsi809Hs#%5B/url)
RIP Nicky.
http://www.espn.com/racing/story/_/id/19437147/american-motorcycle-racer-nicky-hayden-dies-injuries-suffered-bicycle-crash
Sent from my iPhone using Tapatalk
Sad to hear ... terrible way to go ... RIP, Nicky.
FWIW Took a gamble and ordered a set of four Climate Controlled Seat Filters which are 1cm x 8cm x 8cm for 22.00.on ebay which look identical to the SHO and others.
I will keep you updated on the fitment and what not considering they no longer make the media filter and only the housing. Z
[UPDATE] Discussion continued here.
http://www.ecoboostperformanceforum.com/index.php/topic,6570.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,6570.0.html)
(http://i.imgur.com/ItJEh5Lh.jpg)(http://i.imgur.com/WW0bD76h.jpg)
Zsho I can't tell in picture but isn't this the filter for sale on tasca site?
http://www.tascaparts.com/oe-ford/eu5z19e880b (http://www.tascaparts.com/oe-ford/eu5z19e880b)
Quote from: Sbouvia on May 23, 2017, 08:18:40 PM
Zsho I can't tell in picture but isn't this the filter for sale on tasca site?
http://www.tascaparts.com/oe-ford/eu5z19e880b (http://www.tascaparts.com/oe-ford/eu5z19e880b)
Its unfortunate that the new filters do not come with a Filter insert and only the Housing is available for purchase. Z
New Filter
(http://i.imgur.com/zjYk5aOh.jpg)
Previous Filter.
(http://i.imgur.com/7AX0zYph.jpg)
https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,interior,climate+control+seat+filter,16790 (https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,interior,climate+control+seat+filter,16790)
So is that why the dealer is so expensive to change those filters? They wanted $100/side. Do the dealers just get the ebay version now as well? Have you tried them yet?
Quote from: Sbouvia on May 23, 2017, 08:43:03 PM
So is that why the dealer is so expensive to change those filters? They wanted $100/side. Do the dealers just get the ebay version now as well? Have you tried them yet?
The best of my knowledge they have been discontinued for quite some time now and hoping that the new set of filters will fit and should be in by next week.
I will certainly keep y'all updated on all counts.
Here's my very own thread regarding the filters. Z
http://www.ecoboostperformanceforum.com/index.php/topic,6570.0.html (http://www.ecoboostperformanceforum.com/index.php/topic,6570.0.html)
Quote from: ZSHO on May 17, 2017, 02:52:53 PM
I noticed today Travel link is active for any members with Sirius-XM until Memorial Day weekend,enjoy. Z :)
I have never heard of this but with a quick look found what it is but does it only work for the nav units ?
Sent from my Nexus 6P using Tapatalk
Quote from: Gjkrisa on May 24, 2017, 09:41:47 AM
Quote from: ZSHO on May 17, 2017, 02:52:53 PM
I noticed today Travel link is active for any members with Sirius-XM until Memorial Day weekend,enjoy. Z :)
I have never heard of this but with a quick look found what it is but does it only work for the nav units ?
Sent from my Nexus 6P using Tapatalk
IDK. Where you able to gain access to the Travel link feature? Z
BTW the promotion feature is only available if your current subscription with S-XM is active!!
(http://i.imgur.com/VwxMGYWh.jpg?2)
Brand New vid from FordTEch Mack. Z
2011-2017 Ford 3.5L & 3.7L Duratec V6 Engines: Spark Plug Replacement
SPECS BELOW VIDEO.
ftp:// (http://www.youtube.com/watch?v=AcOyPizomBk#)
FLY Racing's LC2 Container!. thoughts!!. Z
ftp:// (http://www.youtube.com/watch?v=5DyAiw85ArA#)
I am sorry, I lost my concentration part way through. The video went into autoloop :P
Cool find!!!!
http://www.foxnews.com/auto/2017/06/07/rare-4x4-ford-mustang-surfaces-in-netherlands.html
I found a great way to transfer your Pale of Methanol/E85 Fuel to another Container and such without spilling a Drop,hope this helps someone out . Z
Craftsman 2-1/2 in. to 1-1/4 in. Adapter $7.00
http://www.sears.com/craftsman-2-1-2-in-to-1-4-in/p-00916999000P?plpSellerId=Sears&prdNo=20&blockNo=20&blockType=G20# (http://www.sears.com/craftsman-2-1-2-in-to-1-4-in/p-00916999000P?plpSellerId=Sears&prdNo=20&blockNo=20&blockType=G20#)
(http://i.imgur.com/eIQ4SG6h.jpg)(http://i.imgur.com/IoHErIMh.jpg)
These pipes are methanol/E85 compatible?
Quote from: SHOdded on June 08, 2017, 02:01:41 PM
These pipes are methanol/E85 compatible?
IDK, FWIW you can just use the adapter alone,bit of Trial and Error until get things sorted out . Z
I use this... rated for gasoline
https://m.advanceautoparts.com/p/performance-tools-multi-use-pump-w1145/7071094-P
Don't forget to tip your Calibrator for outstanding service!
Quote from: FoMoCoSHO on June 17, 2017, 10:13:02 PM
Don't forget to tip your Calibrator for outstanding service!
Don't piss in the wind is always a worth while tip... ;-)
New video from Ford Tech Mack on Ford Escape Hybrid Shuts Off While Driving: STOP SAFELY NOW P1A10 P1A0C P0087 which can apply to many vehicles. Z
(http://www.youtube.com/watch?v=DQ7M4Dm4lOs#)
New video from (FTM) on 2004-2010 Ford F-150 Magnaflow 16518 Performance Cat Back Exhaust System Install. Z
(http://www.youtube.com/watch?v=ZfLGl4Wmdn0&t=51s#)
I don't normally post this stuff... but this one is funny...
http://oppositelock.kinja.com/most-honest-viper-craigslist-ad-ever-1782809075
Sent from my iPhone using Tapatalk
I left my Continental at the dealer this morning for some warranty work. They gave me a 2016 SHO with PP for a loaner! I tried to attach a picture but stupid photobucket won't let me anymore!!
Yeah wants to charge you 400$ a year to share pics via links. Might be able to link albums tho.
So, what is a good alternative to photobucket? Just curious.....why don't sites like this allow pictures to be posted like Facebook...thus eliminating the need for sites like photobucket?
I upload pics to FB from my phone. Then download to my PC. They get resized perfect for Forum use. I have no problems adding pics to this forum using the attachments and other options button below.
I use http://imgur.com/ (http://imgur.com/) for pics,gifs and couldn't be happier. Z
Click (under) Attachments and other options and choose a file to upload your desired attachments to post pics.
(http://i.imgur.com/fhRa9VO.gif)
The "attachments and other options" doesn't seem to work for me.
Quote from: Brucelinc on July 07, 2017, 04:23:39 PM
The "attachments and other options" doesn't seem to work for me.
Click Attachments and other options and choose a file to attach pics and then click open.
If you would like to add additional pics click on more attachments.
I think its limited to 200px.
I already posted a couple of pics above and it works as designed. Z
(http://i.imgur.com/TxsC0WKh.jpg)
! No longer available (http://www.youtube.com/watch?v=eGTrPwvaV4g#)
Quote from: Brucelinc on July 07, 2017, 04:23:39 PM
The "attachments and other options" doesn't seem to work for me.
That is a dealership loaner? nice, aftermarket intake and window decals.
Quote from: lamrith on July 07, 2017, 05:08:41 PM
Quote from: Brucelinc on July 07, 2017, 04:23:39 PM
The "attachments and other options" doesn't seem to work for me.
That is a dealership loaner? nice, aftermarket intake and window decals.
The pics are mine and posted a couple to make sure the feature is working. Z :)
Quote from: ZSHO on July 07, 2017, 05:21:50 PM
Quote from: lamrith on July 07, 2017, 05:08:41 PM
Quote from: Brucelinc on July 07, 2017, 04:23:39 PM
The "attachments and other options" doesn't seem to work for me.
That is a dealership loaner? nice, aftermarket intake and window decals.
The pics are mine and posted a couple to make sure the feature is working. Z :)
OK, that just proves that I am overworked, tired and need to go home for the day. Mistake your post for Bruce.. yikes..
Quote from: lamrith on July 07, 2017, 05:24:27 PM
Quote from: ZSHO on July 07, 2017, 05:21:50 PM
Quote from: lamrith on July 07, 2017, 05:08:41 PM
Quote from: Brucelinc on July 07, 2017, 04:23:39 PM
The "attachments and other options" doesn't seem to work for me.
That is a dealership loaner? nice, aftermarket intake and window decals.
The pics are mine and posted a couple to make sure the feature is working. Z :)
OK, that just proves that I am overworked, tired and need to go home for the day. Mistake your post for Bruce.. yikes..
Its all Good!! I sometimes have trouble to Decipher from Text through emotions but its all in good terms. Z
I can get the jpg in the window by "choose file" but not into the actual post. Does something have to be enabled or am I just as stupid as I look?
Attachments will only post as thumbnails at the bottom of the post. If you want to take it one step further, you have to then open the attachment for viewing, grab the link address, then post that address back in the body of the post, like you normally would with any external site. Helps to put the IMG tag around the images though, not as friendly on this site as the DIRECT LINK on photobucket. So first the "open tag" i.e. "<IMG>" then the link address then the "close tag" i.e. "</IMG>" minus all the " of course :)
Yeah, a bit of effort.
Quote from: Brucelinc on July 07, 2017, 05:39:38 PM
I can get the jpg in the window by "choose file" but not into the actual post. Does something have to be enabled or am I just as stupid as I look?
Brucelinc,
Drop me a PM, you can email me the images and I will get them posted for you if you want.
Quote from: lamrith on July 07, 2017, 06:05:40 PM
Quote from: Brucelinc on July 07, 2017, 05:39:38 PM
I can get the jpg in the window by "choose file" but not into the actual post. Does something have to be enabled or am I just as stupid as I look?
Brucelinc,
Drop me a PM, you can email me the images and I will get them posted for you if you want.
Thanks but I was just trying to see how to do it. I don't need to post a picture now but I will at some point. I have always used photobucket but I am not paying them $400.
Tapatalk app works great for posting pics.
But it's best used on a mobile device.
I had a PP SHO for a loaner yesterday. I enjoyed driving it but was surprised at how firm the suspension is compared to my Continental. As awesome as SHOs are with tuning, driving a stock one was a bit underwhelming. Brake boosting for all it was worth, I couldn't break the tires loose on pavement. Seemed like there was quite a bit of turbo lag, too.
On the bright side, these cars are very comfortable, quiet and solid feeling. It is the tune the puts icing on the cake, though! I am not telling you guys anything you didn't already know but this was the first SHO I have driven since the gen 4 was introduced for the 2010 model year.
Weird because attaching pictures never works for me on this forum. And my photobucket pictures are still working. IDK. Maybe I am special?
What ever happened to the SHOUTBOX?
Did anyone check functionality after the latest round of updates?
Quote from: Brucelinc on July 08, 2017, 09:02:20 AM
I had a PP SHO for a loaner yesterday. I enjoyed driving it but was surprised at how firm the suspension is compared to my Continental. As awesome as SHOs are with tuning, driving a stock one was a bit underwhelming. Brake boosting for all it was worth, I couldn't break the tires loose on pavement. Seemed like there was quite a bit of turbo lag, too.
On the bright side, these cars are very comfortable, quiet and solid feeling. It is the tune the puts icing on the cake, though! I am not telling you guys anything you didn't already know but this was the first SHO I have driven since the gen 4 was introduced for the 2010 model year.
I'll agree with you on that one. The PP rides hard. My terminator has steeda sport lowering springs and it still rides way softer. It's too bad Ford didn't do some sort of variable dampening. It's almost like they said "aww just crank the spring rates way the hell up there."
Yeah the PP do ride hard. That's why I was very surprised how little difference there was between the stock springs and the H&R's.
How do the PP springs and the Megan's compare?
Quote from: bamsho on July 11, 2017, 01:55:54 PM
Yeah the PP do ride hard. That's why I was very surprised how little difference there was between the stock springs and the H&R's.
I'm pretty happy with the adjustable firmness options in my MKS. It only has 3 settings, but it gets the job done. Full soft is a bit floaty, middle setting is best 90% of the time, and full firm is great when driving aggressively. I'm kind of surprised that they didn't include the adjustable dampeners in the SHO.
Here a new video from F.T.M on 2004-2017 Ford F-150 Rear Shock Replacement: Featuring Bilstein 5100 Series Shocks. Z
http://youtu.be/NuytJh0gQ9I (http://youtu.be/NuytJh0gQ9I)
Jul 20, 2017 -Ford's 'golden noses' sniff out what drives the Chinese. Z :o
! No longer available (http://www.youtube.com/watch?v=nOQgfPHJdxk#)
Interesting.
I wish they made some similar covers for the Ecoboost Platform. Z.
2015-17 MUSTANG BILLET ALUMINUM ENGINE COMPARTMENT CAP COVER SET W/ LASER ENGRAVED FORD PERFORMANCE .
170.00-set
(http://i.imgur.com/GXaieJ0h.jpg)
https://performanceparts.ford.com/part/M-6766-M50?cks=432128850&emailid=FP_FASTNEWS (https://performanceparts.ford.com/part/M-6766-M50?cks=432128850&emailid=FP_FASTNEWS)
Quote from: ZSHO on July 27, 2017, 07:27:04 PM
I wish they made some similar covers for the Ecoboost Platform. Z.
2015-17 MUSTANG BILLET ALUMINUM ENGINE COMPARTMENT CAP COVER SET W/ LASER ENGRAVED FORD PERFORMANCE .
170.00-set
(http://i.imgur.com/GXaieJ0h.jpg)
https://performanceparts.ford.com/part/M-6766-M50?cks=432128850&emailid=FP_FASTNEWS (https://performanceparts.ford.com/part/M-6766-M50?cks=432128850&emailid=FP_FASTNEWS)
I agree!
Here are Shelby caps (not cap covers) for a 2v Mustang on the coolant reservoir and oil fill spout.
(http://i.imgur.com/TNGkhse.jpg)
The dipstick handle and brake reservoir cap did not fit, but at least it dressed it up a bit. Would like to find out if there's a Mustang dipstick and brake cap that cross over.
Z......
The directions state that those covers simply fit over, or slip on top of, the original factory plastic covers. They are held in place using double-sided tape.
That said, I see no reason why you, or anyone else couldn't make them work on the EB's.
Worth a try.
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on July 27, 2017, 11:16:01 PM
Z......
The directions state that those covers simply fit over, or slip on top of, the original factory plastic covers. They are held in place using double-sided tape.
That said, I see no reason why you, or anyone else couldn't make them work on the EB's.
Worth a try.
Sent from my SM-N920V using Tapatalk
bpd1151 -your insight is always appreciated,thanks buddy. Z :)
Here are some cool new Ecoboost Decals. Z
27.00-33.00 -Sold in set of two emblems
(http://i.imgur.com/G7iVH9wh.jpg)(http://i.imgur.com/9zFxN6Sh.jpg)(http://i.imgur.com/9UFHguzh.jpg)
http://www.levittownfordparts.com/ford-performance-emblem-ecoboost-black-silver-p-6289.html (http://www.levittownfordparts.com/ford-performance-emblem-ecoboost-black-silver-p-6289.html)
http://www.levittownfordparts.com/2010-2017-ford-taurus-accessories-c-39_187.html (http://www.levittownfordparts.com/2010-2017-ford-taurus-accessories-c-39_187.html)
Nice!
According to their website, these are actual emblems and not sticker overlays?
Quote from: FearlessAZ on July 31, 2017, 08:33:17 AM
According to their website, these are actual emblems and not sticker overlays?
These are the "real deal" OEM replacement. Z :)
Automotive-grade double sided tape included on back of emblem.
Sold in set of two emblems.
I will make my story short and sweet because i'm still a bit shook up after this incident and very fortunate that my experience was without incident.
I was driving my daughter to school early this morning and after that finally got in the highway and had some room to clean some cob webs out and went from 80-mph to 110-mph in matter of couple seconds to later find out that the brakes would not function and the brake light on dashboard came on followed by it beeping.
I was very fortunate to be able to stop and clearly was a wake up call.
I found the vacuum line connector popped off the intake manifold. :o
I would reiterate,emphasize to any member to please check your vacuum lines periodically to verify that they are properly connected,secured to your intake manifold Tuned or not modified or not,just my 2 cent worth. Z
(http://i.imgur.com/XwTF5aZh.jpg)
Wow!!!!!! That is scary! I am glad you and your daughter are both ok! Time to get some more clamps.
Sent from my iPhone using Tapatalk
That would scare the bejeezus out of me too! Glad everyone is ok! Wonder why that thing popped off in the first place ... Second the call to clamps.
Quote from: StealBlueSho on August 01, 2017, 12:13:14 PM
Wow!!!!!! That is scary! I am glad you and your daughter are both ok! Time to get some more clamps.
Sent from my iPhone using Tapatalk
I am glad your ok!
is there a closer shot ? i clamped a bunch of crap about 2 weeks ago .. but am unsure if i covered your circled item.
Thanks it was indeed a scary event and even when doing 10-mph the car would not stop!!!!! The vacuum line connector came loose which connects,feeds to the brake booster line when hitting the skinny pedal. Z
(http://i.imgur.com/sSq9rsOh.jpg?1)
Does the braking system share the same vacuum as the turbos run off? I am guess yes?
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on August 01, 2017, 01:28:19 PM
Does the braking system share the same vacuum as the turbos run off? I am guess yes?
Sent from my iPhone using Tapatalk
I'm assuming. IDK. Z
Quote from: ZSHO on August 01, 2017, 01:27:11 PM
Thanks it was indeed a scary event and even when doing 10-mph the car would not stop!!!!! The vacuum line connector came loose which connects,feeds to the brake booster line when hitting the skinny pedal. Z
(http://i.imgur.com/sSq9rsOh.jpg?1)
thank you.. will need to inspect it. Not sure mine will clamp..
The reason I ask... I know on the LMS 4+X tunes (meth and non-meth) they make adjustments that effect the blow off valves. Sometimes they don't open, sometimes they open partially, and sometimes they open all the way to let off the excess boost. I am sure there is some logic to it, I just don't know what. Thats why you get the squawk noise when the BOV open. ANYWAY... if they don't open all the way or don't open at all, the boost pressure gets pushed back against the turbines in the turbo and create a lot of pressure in the vacuum lines. This is why those that run the higher LMS tunes need to clamp their vacuum lines. Nothing wrong with this, as I said, I am sure there is a reason.
If the system is shared with the brake booster, it could be causing excess pressure in those lines as well. I have a tune from Brad where it behaves similarly. Just might be a good thing to check ALL the vacuum lines regularly with those tunes. I am assuming again that they are shared systems.
I don't think you can clamp that hose? But I will tell you one thing.. if I can't, I would be looking for a way to secure it better that is a fact. I might even throw some JB Weld around it... going fast is fun, stopping is just as fun!
Quote from: StealBlueSho on August 01, 2017, 02:10:14 PM
The reason I ask... I know on the LMS 4+X tunes (meth and non-meth) they make adjustments that effect the blow off valves. Sometimes they don't open, sometimes they open partially, and sometimes they open all the way to let off the excess boost. I am sure there is some logic to it, I just don't know what. Thats why you get the squawk noise when the BOV open. ANYWAY... if they don't open all the way or don't open at all, the boost pressure gets pushed back against the turbines in the turbo and create a lot of pressure in the vacuum lines. This is why those that run the higher LMS tunes need to clamp their vacuum lines. Nothing wrong with this, as I said, I am sure there is a reason.
If the system is shared with the brake booster, it could be causing excess pressure in those lines as well. I have a tune from Brad where it behaves similarly. Just might be a good thing to check ALL the vacuum lines regularly with those tunes. I am assuming again that they are shared systems.
I don't think you can clamp that hose? But I will tell you one thing.. if I can't, I would be looking for a way to secure it better that is a fact. I might even throw some JB Weld around it... going fast is fun, stopping is just as fun!
Yeah I need to take hard look ... I had no idea these cars can go **full brake failure** with *one* missing hose.
ZSHO was it full brake failure or did you just loose the brake booster? I would get that the brakes still worked, just no "power" to them...
Sent from my iPhone using Tapatalk
I appreciate the reply"s from all above.
I use the brake booster line for vacuum reference in conjunction with the Tial BOV.
SBS I would say it felt like the brake booster line failing cause even when fully stopped in Drive the car would want to lunge foward and yes it felt like no power to the brakes.
I immediately found the vacuum connector loose telling me it was not fully connected to the intake manifold.
I simply pushed it back in until I heard it click into place making me think it was not fully seated and lesson learned. Z
I also found code C0021.
http://www.obd2-code.com/2017/05/abs-verification-test.html?m=1 (http://www.obd2-code.com/2017/05/abs-verification-test.html?m=1)
Z - Glad you were able to get slowed down and stopped.It sounds like you just lost booster assist, but if you literally could not stop the car at all, then I would say you need to have it looked at.
I thought it was required by DOT that a vehicle brake system could still stop the vehicle even in event of booster failure. Hoses fail and I find it a bit concerning that a loose/busted hose made the car unable to stop. Or maybe you need to work on muscles in that right leg? :-p :rofl2:
New Video from F.techmack on A/C system leak test. Z
http://youtu.be/0u3ZYcxpFrI (http://youtu.be/0u3ZYcxpFrI)
It's fine members such as bpd1151 and of course our very own SHOdded,FoMOCoSHo and others who are one of the originators who have pioneered the Ecoboost platform and devoted their time contributing to this fine forum which gives it that ADDED BOOST BY FAR.(Respectively). Z
:clap2: :clap2:
:thankyou:
Aw shucks!
i'm loving this cooler air! the temps are down into the 60's tonight and the air is much drier.... she feels like a different car. i can't wait for october
Quote from: ZSHO on August 07, 2017, 10:51:03 PM
It's fine members such as bpd1151 and of course our very own SHOdded,FoMOCoSHo and others who are one of the originators who have pioneered the Ecoboost platform and devoted their time contributing to this fine forum which gives it that ADDED BOOST BY FAR.(Respectively). Z
:clap2: :clap2:
:thankyou:
Thanks Z.
Much appreciated. Difficult to believe sometimes that my SHO's already 7yrs old (almost 8yrs really come to think of it).
So many things I see being discussed now by newer members/owners are many of the topics that have been previously covered by myself, or a few of the other original crew of the Gen4 owners.
I still try to pop my head in here every now & then to contribute and/or clarify posts so as to maintain accurate info, but my last foray into this platform will entail custom drivetrain upgrades.
Well that, and a few other minor appearance mods to the interior. Other than that, I've touched just about every other aspect of this car as is humanly possible. It's a solid build overall I think, as do others who have seen it in person. So I am happy with its results for sure.
Still nice to see the spirit and excitement of the platform being carried on by the newer owners respectively. Always cool stuff.
Your own contributions to date, should not be overlooked, or taken lightly in the same token. Your info and due diligence as a staff member here, are equally inspiring and appreciated.
That said, I am now electing to get off your nutsack. Bwahahahaha.
Sent from my SM-N920V using Tapatalk
Quote from: 92BlackGT on August 08, 2017, 03:50:48 AM
i'm loving this cooler air! the temps are down into the 60's tonight and the air is much drier.... she feels like a different car. i can't wait for october
Can't wait to see those time slips :)
New video a must see!!!!!!!!!!!. Z
http://youtu.be/bemohIwigMQ (http://youtu.be/bemohIwigMQ)
Nice find Z! Not my taste, but looks like a lot of money went into that project. Strange choice of vehicle!
Ummmm yea...... not entirely sure about the "must see" part. But meh, to each their own.
I too can appreciate the time, talent, & treasure that went into it, but would NEVER follow the same path.
You know, what has always left me scratching my head on projects such as these, where 26" (or larger) diameter wheels are installed, & they don't ever consider upgrading brakes.
All those tiny @$$ factory rotors & calipers, after lobbing on heavy @$$ wheels, can't plausibly believe their whips are going stop better.
**SMH**
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on August 09, 2017, 08:03:40 AM
Ummmm yea...... not entirely sure about the "must see" part. But meh, to each their own.
I too can appreciate the time, talent, & treasure that went into it, but would NEVER follow the same path.
You know, what has always left me scratching my head on projects such as these, where 26" (or larger) diameter wheels are installed, & they don't ever consider upgrading brakes.
All those tiny @$$ factory rotors & calipers, after lobbing on heavy @$$ wheels, can't plausibly believe their whips are going stop better.
**SMH**
Sent from my SM-N920V using Tapatalk
My guess is they are not worried about stopping better.... i doubt that will ever see a track..
Sent from my iPhone using Tapatalk
Not even for track purposes (which I agree, you'd be hard pressed to see there for sure, entertaining it would be though. I know I'd laugh).
But I'm talking just mere stopping as a DD.
It's laughable to sling not only the sheer weight alone of each wheel to the car. But factor in the added rotational mass, etc. Geez.
Then drop all that coin on rims, only to peer through them and spy the tiny @$$ lil dinky & typically OEM rotors to boot. Ha!
Just is funny to see.
Meh. Like I said, just interesting.
Sent from my SM-N920V using Tapatalk
I can't imagine what size rotor would be necessary for it to look right though. Maybe it just needs a big clamp around the outer edge. Bicycle style. LOL
Ha! Now that's comical.
Sent from my SM-N920V using Tapatalk
Sooo I am not a big fan of exterior cosmetics... BUT! Coming up with concepts for a Madmax style theme... just gotta find a root style blower! Honestly though... talking to a buddy who has a body shop...
Sent from my iPhone using Tapatalk
:popcorn:
No root style... but the old run down beastly look totally does it for me...
Sent from my iPhone using Tapatalk
:popcorn: :popcorn:
Quote from: SHOdded on August 11, 2017, 09:47:43 PM
:popcorn: :popcorn:
No faith? I gotcha... no one wants to tear up a fairly new car... lol... if it only had a V8... but then it would be slower... last of the V8 interceptors... might end up being a charger... ha! Far from a Ford as depicted in the original two films..
Sent from my iPhone using Tapatalk
well, can't pass up that V8 sound I suppose ...
Nice! & Congrats :thumb:
Wife filled out the forum for the types of cars that may show up to pick up the kids from school....
"Ford SHO" was what she put down...I wasn't going to correct her.
Sent from my iPhone using Tapatalk
Better she put "Ford SHO" instead of "Ford SHO full of meth" . That wouldn't go over well.
New video from (FTM) on 2008-2012 Ford Escape No Crank No Start: Ignition Lock Module Replacement,but figured i'll throw it out there. Z
http://youtu.be/ke235o-lbzc (http://youtu.be/ke235o-lbzc)
The SHO has been my DD for exactly four years now since purchasing it Brand New with 2 miles on the OD and has served me quite well over the years and exceeded my expectations from the hot weather in sunny Florida to the frigid temps here in N.Y and couldn't be happier to say the least...........................
I guess after spending the extra $$$$ for a Direct port setup the time has come to add an additional vehicle to the stable in the coming weeks so stay tuned to be aroused my friends. Z :)
Excited to see what the new ride is gonna be!!!
Sent from my iPhone using Tapatalk
:o :o :o. Dodge Viper, Venom Edition, or maybe Voodoo ...
Quote from: SHOdded on August 23, 2017, 03:00:33 PM
:o :o :o. Dodge Viper, Venom Edition, or maybe Voodoo ...
I guess i'll keep on dreaming. LOL. Z :sleeping:
LOL. Dreams are made of this ...
Z, make sure you're a smarter business man than I am. I paid about $20,000 for a 2008 Honda Fit with 190,000 miles on it. It's my new beater.
Details of transaction...bought wife a new car and kept her Fit as a house beater/toy.
Quote from: sholxgt on August 23, 2017, 05:25:46 PM
Z, make sure you're a smarter business man than I am. I paid about $20,000 for a 2008 Honda Fit with 190,000 miles on it. It's my new beater.
Details of transaction...bought wife a new car and kept her Fit as a house beater/toy.
Lol... I sold my beloved Tahoe for a Ford Escort that my wife ended up driving...because she was afraid to drive the big SUV... I ended up daily driving the Ford Fusion.... I am still bitter about giving up the Tahoe...
Sent from my iPhone using Tapatalk
Honestly, it's been a trip with this car... but this is how Ford should have built these cars (minus the meth)... it might have been comparable to the Buick GN had they done so...
The coilovers make this car really come alive. The tune brings the powah and the shifting right where it needs to be... I just don't know how Ford missed the boat so bad on this... didn't want to outsell the mustang maybe?
Sent from my iPhone using Tapatalk
Hard fought improvements ... This gen SHO was introduced 8 years ago! The Mustang would have had the same parts in a quarter of that time if not sooner. But everybody loves a showman, and the Mustang is that showman.
I'd say that Ford has a long history of doing things almost right.
Every year of Mustang that I can think of has something that just wasn't right.
Fox bodies - drum rear brakes
SN95 - everything
S197 - hood latch
S550 - Chinese manual transmission
It's the penny pinchers that kill them. I'd say that was true until the GT350/350R. I think the engineers finally got to run the show for a bit.
Quote from: SHOdded on August 23, 2017, 05:50:07 PM
Hard fought improvements ... This gen SHO was introduced 8 years ago! The Mustang would have had the same parts in a quarter of that time if not sooner. But everybody loves a showman, and the Mustang is that showman.
Very true! But I see sooooooo many Mustangs (most of the time in my rear view at this point) that I rarely notice them at all! I contest that if Ford had done right by the SHO history (fastest four door sedan second only to the M5) then they would have been more of a success...
But I suppose the margins just were not there...
Sent from my iPhone using Tapatalk
Corporate America. Ain't it grand!
New Video from FP on Half-Shaft Install. Z
http://youtu.be/3n7dLl_GMtE (http://youtu.be/3n7dLl_GMtE)
Here's a Sweet cargo organizer that includes a locking device made for the PI. Z
Progard Taurus Police Interceptor Trunk Equipment Storage and Gear Organizer with Hinged Lid 2013-2016
Progard Taurus Police Interceptor Sedan Trunk Equipment Storage and Gear Organizer with Hinged Lid
394.00
http://www.fleetsafety.com/progard-taurus-police-interceptor-sedan-trunk-equipment-storage-and-gear-organizer-with-hinged-lid/ (http://www.fleetsafety.com/progard-taurus-police-interceptor-sedan-trunk-equipment-storage-and-gear-organizer-with-hinged-lid/)
Not sure if this has been brought up before, but I'm bewildered by how dirty the door jams get in my MKS. Especially the rear jams.
Been owning and cleaning cars for over 25 years and never had a car that needs door jam cleaning with every wash. I keep them waxed to make cleaning easier, but boy do they collect the dirt.
There used to be a tsb for 2010 SHO I think that involved changing the weatherstrip. Maybe something like that is needed?
TSB 11-11-20
http://revbase.com/BBBMotor/TSb/DownloadPdf?id=176712 (http://revbase.com/BBBMotor/TSb/DownloadPdf?id=176712)
Quote from: sholxgt on August 25, 2017, 01:16:36 PM
Not sure if this has been brought up before, but I'm bewildered by how dirty the door jams get in my MKS. Especially the rear jams.
Been owning and cleaning cars for over 25 years and never had a car that needs door jam cleaning with every wash. I keep them waxed to make cleaning easier, but boy do they collect the dirt.
I had a gallon of water inside my rear driver's side door making this swoosh sound because of this issue. Z :(
Quote from: ZSHO on August 25, 2017, 01:52:43 PM
Quote from: sholxgt on August 25, 2017, 01:16:36 PM
Not sure if this has been brought up before, but I'm bewildered by how dirty the door jams get in my MKS. Especially the rear jams.
Been owning and cleaning cars for over 25 years and never had a car that needs door jam cleaning with every wash. I keep them waxed to make cleaning easier, but boy do they collect the dirt.
I had a gallon of water inside my rear driver's side door making this swoosh sound because of this issue. Z :(
LOL. I try to remember to pull up on the rubber stripping at the base of each door from time to time. Amazed at how much water comes out sometimes.
Just got my first Lamin-X order. Ordered rear bumper protector kits for our two hatch back cars. Really impressed with the packaging and completeness of the kit. Came with lots of install stuff.
Now I just hope that I'm able to install without balling it all up. Will give it a shot on Sunday.
Would like to do a complete front paint protection kit, but concerned it may be beyond my install abilities.
E.B.P.F Members please stay safe and take the necessary precautions during this wicked Category 4 Hurricane.
Prayers and thoughts are with you and your family's. Z
(http://i.imgur.com/j5xiTfQh.jpg)
http://youtu.be/m62f4QPcMhE (http://youtu.be/m62f4QPcMhE)
Quote from: sholxgt on August 25, 2017, 07:14:00 PM
Just got my first Lamin-X order. Ordered rear bumper protector kits for our two hatch back cars. Really impressed with the packaging and completeness of the kit. Came with lots of install stuff.
Now I just hope that I'm able to install without balling it all up. Will give it a shot on Sunday.
Would like to do a complete front paint protection kit, but concerned it may be beyond my install abilities.
Just use a lot of spray move it to the right spot and seal it in.
corners will need some extra patience but not hard
Sent from my iPad using Tapatalk
If your SiriusXM radio is active enjoy a complimentary free Travel Link Services until Labor day weekend which includes Traffic alerts,fuel pricing and more,enjoy. Z :)
http://www.siriusxm.com/travellink/services?desktop=yes (http://www.siriusxm.com/travellink/services?desktop=yes)
Plus 100 free music channels from Aug 23 through September 5th 2017
https://slickdeals.net/f/10478072-free-2-weeks-siriusxm-preview-100-channels-from-august-23-september-5 (https://slickdeals.net/f/10478072-free-2-weeks-siriusxm-preview-100-channels-from-august-23-september-5)
(http://i.imgur.com/CdEh0Kih.jpg)
Must watch!! New video from FTM on Ford Quick Tips #77: DTC P0460 P0463 Erratic Fuel Gauge Quick Fix! Z :)
http://youtu.be/aArfUtaSOYg (http://youtu.be/aArfUtaSOYg)
YOUR NEXT DOMINO'S DELIVERY MAY BE MISSING THE DRIVER . Z
https://www.carcomplaints.com/news/2017/dominos-delivery-missing-driver.shtml (https://www.carcomplaints.com/news/2017/dominos-delivery-missing-driver.shtml)
Somehow I picture driverless/passengerless cars getting vandalized regularly.
Amazon and drones. Domino's and driverless cars. Why do we need people anyway. Varmints they are. LOL
Quote from: SHOdded on August 30, 2017, 02:08:56 PM
Amazon and drones. Domino's and driverless cars. Why do we need people anyway. Varmints they are. LOL
That unfortunately is coming closer and closer to being true...
When AI scraps your language because it's crap, things are not looking good...
Facebooks AI did it and so did the AI google is working on...
https://www.google.com/amp/s/www.forbes.com/sites/tonybradley/2017/07/31/facebook-ai-creates-its-own-language-in-creepy-preview-of-our-potential-future/amp/
Sent from my iPhone using Tapatalk
If only we made movies on machines come to life/run amok ... oh wait ...
i wish we could castrate identity thieves
fricken scum of the earth!
:o you got hit? sorry to hear, man. i have only had credit cards used fraudulently, and am glad that is the extent of it so far!
@ 92BlackGT feel bad about the mischief your going through and could certainly relate. Z
The winter - blend gasoline is fast approaching us folks so no better time to hit your local Track especially with the cooler Temps. Z :drive:
https://drive.google.com/file/d/0B8JUL90DXgdiQ2QwZlQ5cDRtRE0/view?usp=drivesdk
Quote from: ZSHO on September 01, 2017, 01:58:09 PM
The winter - blend gasoline is fast approaching us folks so no better time to hit your local Track especially with the cooler Temps. Z :drive:
https://drive.google.com/file/d/0B8JUL90DXgdiQ2QwZlQ5cDRtRE0/view?usp=drivesdk
Just add a smidge more meth!
Sent from my iPhone using Tapatalk
Quote from: ZSHO on September 01, 2017, 01:58:09 PM
The winter - blend gasoline is fast approaching us folks so no better time to hit your local Track especially with the cooler Temps. Z :drive:
https://drive.google.com/file/d/0B8JUL90DXgdiQ2QwZlQ5cDRtRE0/view?usp=drivesdk
What are these cold temps you talk about?
Still 100 here at 8PM.
I wish Phoenix didn't go to a winter blend.
Brand spanking new video from(FTM)on Ford Evap System Leak Testing w/ OTC Leak Tamer: DTC P0442 Small Evap Leak .Z :)
http://youtu.be/RhyVaTNstaM (http://youtu.be/RhyVaTNstaM)
Why is the Facebook site full of jackwagons?
Sent from my iPhone using Tapatalk
Facebook site? of what do you speak, kind sir? EBPF or ...
Quote from: SHOdded on September 04, 2017, 06:49:32 PM
Facebook site? of what do you speak, kind sir? EBPF or ...
Correct, the Facebook EBPF... I'm gonna drop off that one.. thought it might be a good source of information sharing... apparently not. The only guys on there that I like are the same guys on this forum! Otherwise.. typical FB asshats...
Sent from my iPhone using Tapatalk
What is Facebook?
It is a compilation of FacePalm's.
Quote from: SHOdded on September 04, 2017, 07:08:53 PM
It is a compilation of FacePalm's.
^^^this is fact. I don't understand how a simple question about BCB tunes turns into a sh!t show....
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on September 04, 2017, 07:17:03 PM
Quote from: SHOdded on September 04, 2017, 07:08:53 PM
It is a compilation of FacePalm's.
^^^this is fact. I don't understand how a simple question about BCB tunes turns into a sh!t show....
Sent from my iPhone using Tapatalk
heh or the Sxx tune.....
There's a tune for sex?
Sent from my SM-N920V using Tapatalk
^^^what he said!!! I plunk down a CC for that!
Honestly... I think the forum automatically edits out S...
Sent from my iPhone using Tapatalk
It's not always the case ^^ but we try to stay on TOP of the s** the best we can. Z :smile:
Here's a new Video from(FTM)on Ford Quick Tips #78: What a Failed Strut Looks Like and How To Test for it! .Z :)
http://youtu.be/BBQyTyR_Zqs (http://youtu.be/BBQyTyR_Zqs)
I hope everyone Down South stays safe in harms way of Mother Nature's fury. Z
(https://i.imgur.com/YQyp03d.gif)
Just wanted to check in and say "hi." :)
Haven't been on for a while - baby duty has been all consuming.
I also meant to get on a couple weeks ago and fix all my Photobucket links, but my laptop hard drive crapped out, and I've yet to replace it. Just have the phone for the time being, since I'm not willing to learn the wifey's Macbook. :P Luckily, I think I had most everything backed up.
Hope everyone is well!
Sent from my iPhone using Tapatalk
HI!!! Hows the newest addition to the family pack working out?
All these slips lately.... weather must have taken a good turn!
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20170911/8bd612f7509d428886ab255ea9b672db.jpg)
Sent from my iPhone using Tapatalk
LOL
Here's a Great new video from(FTM)on Ford F-150 5.4L 3v Engines Hard to Diagnose Cylinder Misfires: Diagnostic Tips and Tricks which can be applied to many vehicles. Z :)
http://youtu.be/ZVli6Ve9u_I (http://youtu.be/ZVli6Ve9u_I)
I always tend to use the same Shell gas station out in N.J which is located in a high traffic area and bit more expensive but worth every cent.
This time around had no choice but to use a local BP station near me and the next morning noticed a rough idle upon cold start which lasted roughly 30 seconds and went away.
The following day it was not so predominant,but after filling up at my good old Shell station she's back to normal without any hiccups to mention.
I'm assuming it was some bad gas or winter-blend gas is upon us or a combination of both. IDK. Z
Oh my Oh my just noticed i'm closing in to my consistent 6,000 post here at the one and only E.B.P.F which should be any day now.lol. Congrats to me,cheers. Z :P
(https://i.imgur.com/2pa6cEg.gif)
I think bpd jacked Z's ID for that last post. LOL! Congrats, pal, and here's to MANY more!
And BTW, last time I got 30 mpg on my Edge, it was with gas from ... a BP station in NJ! I will say I think NJ has better fuel than around here in the Metro DC/MD/VA area.
Quote from: SHOdded on September 12, 2017, 05:44:13 PM
I think bpd jacked Z's ID for that last post. LOL! Congrats, pal, and here's to MANY more!
And BTW, last time I got 30 mpg on my Edge, it was with gas from ... a BP station in NJ! I will say I think NJ has better fuel than around here in the Metro DC/MD/VA area.
Just get a meth kit SHOdded! Extra fuel!
Sent from my iPhone using Tapatalk
Dont really wanna give up my teeth tho ...
Winter blend I believe is making its way to the gas stations... I RARELY ever get KR... started to get a small amount...
Sent from my iPhone using Tapatalk
Haven't noticed any difference in the gas from my preferred stations, will keep an eye out.
New video from (FTM) on 2011+ Ford Mustang 5.0L Coyote Engine: Team RXP Dual Catch Can Installation. Z :)
http://youtu.be/fgjH7g9_2Bs (http://youtu.be/fgjH7g9_2Bs)
Wrong video
Why a video on an OCC that isn't even for an EB based power plant? #confused
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on September 15, 2017, 09:51:32 PM
Why a video on an OCC that isn't even for an EB based power plant? #confused
Sent from my SM-N920V using Tapatalk
They just want to be cool... the Coyotes are jealous of our abilities...
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on September 15, 2017, 09:57:47 PM
Quote from: bpd1151 on September 15, 2017, 09:51:32 PM
Why a video on an OCC that isn't even for an EB based power plant? #confused
Sent from my SM-N920V using Tapatalk
They just want to be cool... the Coyotes are jealous of our abilities...
Sent from my iPhone using Tapatalk
I think someone is promoting or endorse such products Dunno. Z
Quote from: ZSHO on September 15, 2017, 10:06:24 PM
Quote from: StealBlueSho on September 15, 2017, 09:57:47 PM
Quote from: bpd1151 on September 15, 2017, 09:51:32 PM
Why a video on an OCC that isn't even for an EB based power plant? #confused
Sent from my SM-N920V using Tapatalk
They just want to be cool... the Coyotes are jealous of our abilities...
Sent from my iPhone using Tapatalk
I think someone is promoting or endorse such products Dunno. Z
Well then... I have this sweet OCC for those new Camaros...
Sent from my iPhone using Tapatalk
New video from (FTM) on Ford Quick Tips #79: Removing Stuck Exhaust System Components Quick and Easy. Z :)
http://youtu.be/uBW411D8UUM (http://youtu.be/uBW411D8UUM)
Welcome-Winter-Blend-Gasoline with lower prices at the pump. Z
https://business.gasbuddy.com/u-s-sees-gas-price-relief-after-harvey-irma/
woot! OK has the lowest average prices!
Sure, rub our faces in it, LOL!
(https://uploads.tapatalk-cdn.com/20170920/534086f350131affe9406bae6eb4857a.jpg)
Oops.... forgot to refill... and miles from home.
Sent from my iPhone using Tapatalk
:o :o :o
So i reading a dsport article about engine break in and way to measure if you are doing it right is by one doing a leak down test before during and after break in period two using a Dyno and controlling fueling and boost to measure showing a consistent improvement in power output and third measuring PVC system , measuring crankcase pressure
So I'm curious if the sho's have a way to log crankcase pressure or if ford actually has enginerd a way to reduce crankcase pressure?
Sent from my Nexus 6P using Tapatalk
(https://uploads.tapatalk-cdn.com/20170921/95b961dca3fb7b1018e40a1ec9848564.jpg)(https://uploads.tapatalk-cdn.com/20170921/5b2dfd296d91f83bbbefb7a7456802ad.jpg)(https://uploads.tapatalk-cdn.com/20170921/32014ae64082395f60d3dbe227de325f.jpg)
(https://uploads.tapatalk-cdn.com/20170921/5b88abe7c5bf5dbbb2457f8e5725459c.jpg)
(https://uploads.tapatalk-cdn.com/20170921/9586e8f8672d229c085018e2a097f998.jpg)
(https://uploads.tapatalk-cdn.com/20170921/17a3db24d4563460b0570b8c2980f53b.jpg)
This was interesting also
(https://uploads.tapatalk-cdn.com/20170921/d6e621d2c22c9718cc1f0e2fb40aa6f2.jpg)
I came across this oil drain plug for a fast and quick solution to stripped threads. Z
Accufit® Oil Drain Plug M12x1.75
http://agscompany.com/product/accufit-oil-drain-plug-m12x1-75-1-per-bag/ (http://agscompany.com/product/accufit-oil-drain-plug-m12x1-75-1-per-bag/)
(https://i.imgur.com/ZH96ApCh.jpg)
2013 Ford Taurus SHO-Auction!!.Collision Left Side. IDK. Z
(https://i.imgur.com/aRB9XXWh.jpg)
https://www.iaai.com/Vehicle?itemID=24818932&RowNumber=0&loadRecent=True (https://www.iaai.com/Vehicle?itemID=24818932&RowNumber=0&loadRecent=True)
Ugh. Needs to be repaired and put back on the road!
I'd consider taking the trunk lid and those fancy schmansy LED tails on the cheap.
Sent from my SM-N920V using Tapatalk
I think i'm pretty much done with any type of Mod after the - Goodridge G-Stop Brake Lines -12348 R installed,yeah right. Lol. Z
(https://i.imgur.com/zkZm9sKl.jpg)
http://raceconsultingagency.com/goodridge/goodridge-gstop-brake-lines/12348/i-495877.aspx (http://raceconsultingagency.com/goodridge/goodridge-gstop-brake-lines/12348/i-495877.aspx)
nice prices on that site! Mostly for show, not so much for stopping. But may be worth replacing anyway if the hoses look hinky. Didn't make the switch on my SHOs, but just might on the Edge & Fusion.
Quote from: SHOdded on September 25, 2017, 05:03:33 PM
nice prices on that site! Mostly for show, not so much for stopping. But may be worth replacing anyway if the hoses look hinky. Didn't make the switch on my SHOs, but just might on the Edge & Fusion.
MANU -For your Edge! :) 13098 - Goodridge G-Stop Brake Lines- Z
$110.00
(https://i.imgur.com/do0B7gCh.jpg)
http://raceconsultingagency.com/goodridge/goodridge-gstop-brake-lines/13098/i-497040.aspx?aid=9260877 (http://raceconsultingagency.com/goodridge/goodridge-gstop-brake-lines/13098/i-497040.aspx?aid=9260877)
I just shocked the heck out a neighbor/friend. We were coming home from the same place and he was following me.
We have been in each others cars several times and talk cars all the time. He knows my car is faster than his, but didn't believe me when I've told him that it can actually handle well also. Firm setting on the dampners and it's pretty impressive. He has a Civic Si Coupe with sticky tires so he just always rolls his eyes and tries to agree.
Well, the street we live off of is a VERY curvy mountain road. Just like all the roads around here.
He tried, but couldn't keep up with me. He said by the third turn he feared I had gone off the road because he could no longer see my taillights in the next bend. By the 6th turn I hung it wide open and onto the short straight. I finally saw his headlights at the end of the straight as I pulled into the neighborhood.
It truly is amazing what electronics and AWD can do.
Now if I could just find a brake solution. They were garbage by the time I was pulling in and the stench was worse than ever. The ESC just wears out these brakes something fierce. Granted I was asking them to haul a heavy car down from what was possibly slightly over the speed limit after taking multiple up and down tight curves. The first owner trashed the front brakes driving in this same area and I can tell that I'm going to trash the PP brakes as well. Just not a car built for the aggressive mountain driving I suppose.
Fun times! Need some Wilwoods! If only they were not so almost unobtanium. Maybe some carbonfiber brakes. Is the road curvier than, say, Pike's Peak? Worth a chat with Todd of TCE, as he regularly scales that peak. Suspension and brakes need to be set up right.
http://forum.grrrr8.net/showthread.php?t=38310&p=543394&viewfull=1#post543394 (http://forum.grrrr8.net/showthread.php?t=38310&p=543394&viewfull=1#post543394)
Quote from: SHOdded on September 29, 2017, 12:03:32 AM
Fun times! Need some Wilwoods! If only they were not so almost unobtanium. Maybe some carbonfiber brakes. Is the road curvier than, say, Pike's Peak?
Yeah, looking for a less expensive option. LOL. Our Honda is fine with just a fluid and pad change. My CVPI was fine completely stock. Wife's new VW seems to be putting a hurting to the rotors already. I see in that thread they suggest Carbotech's. I see that everywhere and ran those on my Nissan SpecV with Brembo calipers. Great pads, but not cheap. I should probably pony up the dough and see if they end my battle.
Here's a road in my same town. Don't want to show exactly where I live, but you get the idea. I live on the same mountain range that is home to the Tail of the Dragon.
(https://i.imgur.com/Q0pKJuK.jpg)
I almost added another RED HEAD to the Stable!!!!! So So Tempting. Z :-\
(https://i.imgur.com/bTKu7KPh.jpg)
ROWR
Quote from: ZSHO on September 30, 2017, 07:41:29 PM
I almost added another RED HEAD to the Stable!!!!! So So Tempting. Z :-\
(https://i.imgur.com/bTKu7KPh.jpg)
Your current red head is faster... more comfy... and is a wolf in sheeps clothing...
While that 5.0 is nice... it will leave you unfulfilled I dare say...
Sent from my iPhone using Tapatalk
Wait till he has LME twin turbo it. ROOOOOWWWWWWRRRRRR!
The low level washer fluid is working as Designed. Z :)
(https://i.imgur.com/kwOnmRjh.jpg)
Addict...
Hi Everyone, new to this forum, recently picked up a 2010 SHO, love the car so far. Does anyone know what TBS's may have come out on this vehicle. I did read that they may have had a transmission reprogram? My car shift kind of weird from second into third, it kind of "drags out the shift" not right into gear. Does anyone have any insight on this please. Thanks.
Welcome aboard the E.B.P.F Mpcop68! Any pics of your SHO ?
How many miles? Stock? mods?
TSB's related to the 10-12 SHO Below.
https://www.ecoboostperformanceforum.com/index.php/topic,496.30.html (https://www.ecoboostperformanceforum.com/index.php/topic,496.30.html)
Since I might be loosing my company car to DD I have been working with my local ford dealership to find a low mileage SHO to DD... took at a look at 2015 SHO Non-PP today... black... 20K miles... everything sounded good but there was oil leaking around bank 1 between the head and the block.. it was soaking the entire back of the block.. not sure what that was from.. told them to call me when another one SHO's up.
Sure it wasn't a valve cover gasket leak? that would be a fairly common thing on the Gen 4.2.
X2 Gasket,seals and some new plugs. Z
I can attest to the valve cover leak issue. Took the dealer two tries, but mine is sealed up tight for 15,000 miles now.
Strangely enough, my local dealer also has a 2015 non-PP Black SHO on their lot with the same miles. What's the chances?
http://www.jackyjones.com/used/Ford/2015-Ford-Taurus-7f519b230a0e0a17779c935f67698cfc.htm?searchDepth=1:1 (http://www.jackyjones.com/used/Ford/2015-Ford-Taurus-7f519b230a0e0a17779c935f67698cfc.htm?searchDepth=1:1)
I looked at it yesterday when I was there for my last free oil change. Looked good, but no PP and no moonroof left me leaving with my Lincoln.
I unfortunately been busy as of late and just realized i'm on my last pale of Methanol and hopefully some resources will come thru and just don't want to get stuck paying the high cost of Hazmet fee. Z ::nonono:
This weekend is a no-go due to prep of Daughters B-Day. Z
Ah, birthdays. The party poopers of all poopers, LOL! Congratulations and big hugs to the little Miss Z!
Quote from: SHOdded on October 06, 2017, 04:45:53 PM
Ah, birthdays. The party poopers of all poopers, LOL! Congratulations and big hugs to the little Miss Z!
MANU Much appreciated as she's officially a Teenager @ midnight. Z
Test drove a loaded 2014 F150 FX4 Supercrew 3.5EB today. Man I want a truck again. Loved everything except the price. It had all of the creature comforts of my Lincoln, but could pull my trailers and haul junk when needed. Just have to figure out if it's in the budget.
Would need a tune of course :)
temptations abound!
Quote from: sholxgt on October 07, 2017, 06:53:09 PM
Test drove a loaded 2014 F150 FX4 Supercrew 3.5EB today. Man I want a truck again. Loved everything except the price. It had all of the creature comforts of my Lincoln, but could pull my trailers and haul junk when needed. Just have to figure out if it's in the budget.
Would need a tune of course :)
While I was car shopping to get a small list together. I had it narrowed down enough to take the wife shopping. You know women.......
We were at a Ford dealer looking at their SHO's. I showed her "Truck" prices. She was shocked.
Quote from: Macgyver on October 08, 2017, 02:13:42 AMI showed her "Truck" prices. She was shocked.
I stopped and looked at a '14 FX4 ecoboost appearance package at a local stealership, and with 38k miles asking price was STILL $36k. No thank you!
Yup! That's the problem. I think I need to wait for the next gas price hike. Trucks, new and used, are just overpriced right now. To duplicate exactly what I bought new in 2008 would cost exactly double now ($24k - $48k
To put that in perspective, a 2008 Mustang GT Premium cost $32k. They are now $40k. Far, far short of double.
Both of those vehicles had an equal change/improvements over the period. Trucks are just overpriced.
:bigthanx: to Brian (BamSho) for the Methanol lead in the right Direction. Z :thumb:
Quote from: ZSHO on October 08, 2017, 11:45:44 PM
:bigthanx: to Brian (BamSho) for the Methanol lead in the right Direction. Z :thumb:
A wise man recently reiterated, that us Meth heads need to stick together.
Glad to see he has supplied your growing addiction accordingly! Bravo
Sent from my SM-N920V using Tapatalk
Quote from: bpd1151 on October 09, 2017, 12:31:16 AM
Quote from: ZSHO on October 08, 2017, 11:45:44 PM
:bigthanx: to Brian (BamSho) for the Methanol lead in the right Direction. Z :thumb:
A wise man recently reiterated, that us Meth heads need to stick together.
Glad to see he has supplied your growing addiction accordingly! Bravo
Sent from my SM-N920V using Tapatalk
True indeed! I will have to call ,confirm availability prior to making the Trip.
There is one close to Hershey PA!! maybe some Chocolate for the Mrs, :D Z
Quote from: ZSHO on October 06, 2017, 04:42:35 PM
I unfortunately been busy as of late and just realized i'm on my last pale of Methanol and hopefully some resources will come thru and just don't want to get stuck paying the high cost of Hazmet fee. Z ::nonono:
This weekend is a no-go due to prep of Daughters B-Day. Z
Birthdays for the kids are fun! Hope you had a good time and spoiled them rotten! Have you called all the shops in your area? I ended up talking to around 15 shops are so before I was directed to one that sells VP fuels... took quite awhile to find one. Its about 35 minutes from my house..
Quote from: StealBlueSho on October 09, 2017, 09:58:26 AM
Quote from: ZSHO on October 06, 2017, 04:42:35 PM
I unfortunately been busy as of late and just realized i'm on my last pale of Methanol and hopefully some resources will come thru and just don't want to get stuck paying the high cost of Hazmet fee. Z ::nonono:
This weekend is a no-go due to prep of Daughters B-Day. Z
Birthdays for the kids are fun! Hope you had a good time and spoiled them rotten! Have you called all the shops in your area? I ended up talking to around 15 shops are so before I was directed to one that sells VP fuels... took quite awhile to find one. Its about 35 minutes from my house..
Thanks man! I will have to make some calls and since its a moms & pops shop have the option to directly email them which hopefully is a plus.
I will certainly keep ya'll updated and will need to conserve a bit for the time being.
I guess with that being said will order an extra Pump from Julio @ Alky Controls. Z
Glad I could help out Z.
I found an interesting article regarding Methanol and its properties. Z
http://biodieseltutorial.utahbiodieselsupply.com/buyingmethanol/ (http://biodieseltutorial.utahbiodieselsupply.com/buyingmethanol/)
VP- M1
M1 Racing Methanol has a 99.95% minimum purity - the highest purity available in the U.S. With M1, engines run cooler and are less subject to corrosion. VP uses only lined drums which prohibit rust, corrosion and metal deposits that can contaminate fuel delivery systems. Recommended for all methanol-legal racing applications.
TYPICAL VALUES
Specific Gravity: .795 @ 60 ° F
Color: Clear & Bright
RVP: 4.60
Oxygen Content: 49.93%
Purity: 99.85% minimum
The four most important properties of racing fuel
You can't make a racing fuel that has the best of everything, but you can produce one that will give your engine the most power. This is why we produce different fuels for different applications. The key to getting the best racing gasoline is not necessarily buying the fuel with the highest octane, but getting one that is best suited for your engine.
1. OCTANE - The rating of fuels' ability to resist detonation and/or preignition. Octane is rated in Research Octane Numbers (RON), Motor Octane Numbers (MON), and Pump Octane Numbers (R+M/2). Pump Octane Numbers are what you see on the yellow decal at the gas stations and represents an average of RON and MON. VP uses MON because this test method is more prevalent in racing. Most other companies use RON because it is higher, easier to come by, and sounds better in marketing messages. Don't be fooled by high RON numbers or an average -- MON is the most important for a racing application. However, the ability of the fuel to resist preignition is more that just a function of octane.
2. BURNING SPEED - The speed at which fuel releases its energy. In a high-speed internal combustion engine, there is very little time (real time - not crank rotation) for the fuel to release its energy. Peak cylinder pressure should occur around 20° ATDC. If the fuel is still burning after this, it is not contributing to peak cylinder pressure, which is what the rear wheels see.
3. ENERGY VALUE - An expression of the potential in the fuel. The energy value is measured in BTUs per pound, not per gallon. The difference is important. The air fuel ratio is in weight, not volume. Remember, this is the potential energy value of the fuel. This difference will show up at any compression ratio or engine speed.
4. COOLING EFFECT: The cooling effect on fuel is related to the heat of vaporization. The higher the heat of vaporization, the better its effect on cooling the intake mixture. This is of some benefit in a four- stroke engine, but can be a big gain in two-stroke engines.
gotta love the first cold morning of the year and find out the passenger side HVAC only blows cold air. good thing its a cheap and easy blend door
Maybe we should exercise the heat in summer and the cold in winter to keep this behavior from forming, LOL!
Wow....take the time to page through your manual, I found out so much more my car can do that I did not know or understand. Definitely worth looking through....
Quote from: avidmotion on October 11, 2017, 12:02:42 PM
Wow....take the time to page through your manual, I found out so much more my car can do that I did not know or understand. Definitely worth looking through....
Nice!! I know both of my Vin numbers by heart and pretty much the whole manual!! anything that stood out? to share! Thanks. Z :)
New Video from (FTM) On common Fuel pump failure points. Z :)
http://youtu.be/Wo3Szs4X3SA (http://youtu.be/Wo3Szs4X3SA)
WOW. Z :o
(https://i.imgur.com/lE9eh0E.gif)
WTH??? You saw this happen???
Quote from: SHOdded on October 14, 2017, 11:27:40 AM
WTH??? You saw this happen???
Not me!! someone just posted today on there way to work. Z
https://imgur.com/
Ah, ok, still ... wow!
Should probably make it it's own thread, but a lot of weird things in manual...
Example, page 207... warning principles of operation concerning stability control and advancetrac in addition installing any stereo loud speakers May interfere with and adversely affect the advancetrac system install any aftermarket stereo loud speaker as far as possible from the front center console and the tunnel and the front seats in order to minimize the risk of interfering with the advancetrac sensors.
Or....page 290-291... Fail-Safe cooling if the engine begins to overheat the engine coolant temperature gauge will move to the red-hot area the service engine soon indicator light will illuminate the coolant temperature warning light will illuminate if the engine reaches a preset over temperature condition the engine will automatically switch to alternating cylinder operation each disabled cylinder acts as an air pump and cools the engine when this occurs to vehicle still operate however the engine power will be limited and the air conditioning system will be disabled.
Page 121...AWD Messeges... change all wheel drive power transfer Unit Lube displayed when all wheel drive system needs its power transfer unit lubrication changed this message may be set if a vehicle has experienced extended periods of extreme or severe duty cycle driving see your dealer for service. Interesting since mine whined like a Milennial told no. Dealer said it was low, black and thick as pudding and scolded me. I reminded him it is a new to me, used certified warranty 3 year old used car.
It was a cool morning with temps @ 42 degrees and noticed the Heat came on rather quickly,as compared to other times which would take roughly five min upon cold start up with the Reische 170-Stat on my signature.
I noticed the fans were on accompanied by the a/c on the control panel with desired temp set to 80 degrees.
I guess if you need the heat on quick during the toasty,cold winter months just follow the ^^^ steps. Z :)
Quote from: ZSHO on October 19, 2017, 09:01:46 AM
It was a cool morning with temps @ 42 degrees and noticed the Heat came on rather quickly,as compared to other times which would take roughly five min upon cold start up with the Reische 170-Stat on my signature.
I noticed the fans were on accompanied by the a/c on the control panel with desired temp set to 80 degrees.
I guess if you need the heat on quick during the toasty,cold winter months just follow the ^^^ steps. Z :)
My guess as to what you experienced on the temp control is that when you set the desired temp to 80, it turned on your defroster which uses the compressor just like the air conditioning. Having the compressor on is used, I believe, to combat moisture to clear the windshield. So if you are drying the air, it will heat up quicker. I could be totally wrong lol, just trying to reason something! I have long wondered if A/C stands for air conditioning or air compressor because that is a strategy used by many cars I have had.
On a side related note, I have noticed that mine with the 160 from LMS just simply runs warmer all together. On a warmish day with the sun out I am usually between 178-182, but it the early morning as of late it never goes below 185. I kind of think it is a sensor issue, like it uses the ambient temp as a reference or something.
How many miles on your SHO, ncole? Coolant last serviced ...?
Quote from: SHOdded on October 20, 2017, 05:54:26 PM
How many miles on your SHO, ncole? Coolant last serviced ...?
93k, not serviced since at least 52k when I bought it. My warranty runs out at 94.5k, so I am getting it in hopefully this week to do all fluids except oil and maybe catch anything before the warranty expires.
Ken Block Tests the Ford Performance Drift Stick | Ford Performance. Z
http://performance.ford.com/enthusiasts/media-room/2017/10/electronic-handbrake.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/media-room/2017/10/electronic-handbrake.html?cks=432128850&emailid=FP_FASTNEWS)
http://performance.ford.com/enthusiasts/media-room/2017/10/ford-and-roush-develop-new-supercharger.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/media-room/2017/10/ford-and-roush-develop-new-supercharger.html?cks=432128850&emailid=FP_FASTNEWS)
http://youtu.be/z-SHQw8G5SE (http://youtu.be/z-SHQw8G5SE)
Its that time of year again for my annual N.Y inspection and without a Doubt should not have any issues passing my 5th emissions testing here in N.Y with the PPE Catted DP from www.ecopowerparts.com (http://www.ecopowerparts.com) :)
I think the hardest part might be driving without the Methanol active for a couple of days or until the I/M are in readiness state based on Torque pro. Z
You are now in the NO FUN, ALL FUNK zone :(
Its always nice to see more Ecoboost videos representing this platform. Z :)
XDI-HPFP-Installation SHO
http://youtu.be/eqnewM691Fs (http://youtu.be/eqnewM691Fs)
Quote from: ZSHO on November 07, 2017, 05:35:38 PM
Its always nice to see more Ecoboost videos representing this platform. Z :)
XDI-HPFP-Installation SHO
http://youtu.be/eqnewM691Fs (http://youtu.be/eqnewM691Fs)
Surprised this isn't getting more replies. Isn't this a game changer? Unlimited E85 tuning now seems possible. Right?
Quote from: sholxgt on November 07, 2017, 10:05:57 PM
Quote from: ZSHO on November 07, 2017, 05:35:38 PM
Its always nice to see more Ecoboost videos representing this platform. Z :)
XDI-HPFP-Installation SHO
http://youtu.be/eqnewM691Fs (http://youtu.be/eqnewM691Fs)
Surprised this isn't getting more replies. Isn't this a game changer? Unlimited E85 tuning now seems possible. Right?
It unfortunately lost traction since marginal gains to be had with the HPFP alone,unless you take the full E85 route and pump. Z
New Video from (FTM) On Picking the Right Engine Oil for Today's Modern Engines. Z
MUST WATCH!
! No longer available (http://www.youtube.com/watch?v=mBFHumj37Ps&t=189s#)
I have and pay for Sirius/XM radio. I drive enough to justify the expense. I thought I would pass on this news................................
Free sampling over travel holiday. If you car is satellite radio equipped but you are not a current subscriber,now, through Nov 27 (Mon after Thanksgiving your satellite service will work for FREE up to 100 channels.
Should be as simple as just hitting the satellite button on your radio. No need to call or set anything up just hit the button and enjoy.
So, if you are heading "over the hill and through the woods" this holiday Season you have some FREE entertainment coming along with FREE TRAVEL LINK. Enjoy the Season . Z :)
https://www.siriusxm.com/travellink/services (https://www.siriusxm.com/travellink/services)
Good sale...
http://www.shelbystore.com/product-p/venicesb95set.htm (http://www.shelbystore.com/product-p/venicesb95set.htm)
What's the chances a 9.5" wheel with 275/40 could fit in the front?
Looking at this...
http://www.willtheyfit.com/index.php?width=245&aspect=45&diameter=20&wheelwidth=8&offset=39&width2=275&aspect2=40&wheel_size=20&wheel_width=9-5&offset2=40 (http://www.willtheyfit.com/index.php?width=245&aspect=45&diameter=20&wheelwidth=8&offset=39&width2=275&aspect2=40&wheel_size=20&wheel_width=9-5&offset2=40)
makes me think there's a chance. The extra width is fairly split between inside and out.
I'm still on the Quest for a 2nd vehicle and found this 16 Ford Flex for sale @ a Ford Dealer for roughly 30k with 3,430 miles on the clock!
There is a good chance i could snatch it for 28K AFAIK!
The only issue found it did have two previous owners!
Thoughts,opinions greatly appreciated. Z
http://www.windowsticker.forddirect.com/windowsticker.pdf?token=WIMtetzPgDQxCVdTH49kJ5Tiiw3fdUBAyahhcnBjubuxoBk3HdDaFTDVyvsu2VJfcANTd9oUb%2F48C%2Bw7Wkwx8jGk%2FK1%2F66EIVNlsExuBGF2M%2FaJBXFDB7mgkoFX42b4kO%2FoOtKsHAbwAbnQZMXCDJVFQUhKRnbMG3iWwqxdYFJs%3D (http://www.windowsticker.forddirect.com/windowsticker.pdf?token=WIMtetzPgDQxCVdTH49kJ5Tiiw3fdUBAyahhcnBjubuxoBk3HdDaFTDVyvsu2VJfcANTd9oUb%2F48C%2Bw7Wkwx8jGk%2FK1%2F66EIVNlsExuBGF2M%2FaJBXFDB7mgkoFX42b4kO%2FoOtKsHAbwAbnQZMXCDJVFQUhKRnbMG3iWwqxdYFJs%3D)
(https://i.imgur.com/Iks43xTh.jpg)(https://i.imgur.com/fxBoDLqh.jpg)(https://i.imgur.com/MHAgC3Vh.jpg)(https://i.imgur.com/ZrWrl9Lh.jpg)(https://i.imgur.com/ScUYo5Vh.jpg)
I like the color. The two owners in 1 year is unusual, but maybe not unheard of.
Very nice. Dark Blue Metallic?
Quote from: ZSHO on November 30, 2017, 06:19:13 PM
I'm still on the Quest for a 2nd vehicle and found this 16 Ford Flex for sale @ a Ford Dealer for roughly 30k with 3,430 miles on the clock!
There is a good chance i could snatch it for 28K AFAIK!
The only issue found it did have two previous owners!
Thoughts,opinions greatly appreciated. Z
http://www.windowsticker.forddirect.com/windowsticker.pdf?token=WIMtetzPgDQxCVdTH49kJ5Tiiw3fdUBAyahhcnBjubuxoBk3HdDaFTDVyvsu2VJfcANTd9oUb%2F48C%2Bw7Wkwx8jGk%2FK1%2F66EIVNlsExuBGF2M%2FaJBXFDB7mgkoFX42b4kO%2FoOtKsHAbwAbnQZMXCDJVFQUhKRnbMG3iWwqxdYFJs%3D (http://www.windowsticker.forddirect.com/windowsticker.pdf?token=WIMtetzPgDQxCVdTH49kJ5Tiiw3fdUBAyahhcnBjubuxoBk3HdDaFTDVyvsu2VJfcANTd9oUb%2F48C%2Bw7Wkwx8jGk%2FK1%2F66EIVNlsExuBGF2M%2FaJBXFDB7mgkoFX42b4kO%2FoOtKsHAbwAbnQZMXCDJVFQUhKRnbMG3iWwqxdYFJs%3D)
(https://i.imgur.com/Iks43xTh.jpg)(https://i.imgur.com/fxBoDLqh.jpg)(https://i.imgur.com/MHAgC3Vh.jpg)(https://i.imgur.com/ZrWrl9Lh.jpg)(https://i.imgur.com/ScUYo5Vh.jpg)
IDK Z, when I had a non ECO Taurus rental I wanted to roll down the window and choke myself in it.
It had no soul.
Its that time of year again for my annual emissions testing which expired midnight!
So far so good!!! :) reverted back to stock tune and turned off the METH which was utterly painful! Lol.
I have driven roughly 47 miles and based on Torque-Pro the I/M Readiness still showing 2 monitors are still incomplete and not in the readiness state!
I will keep you updated on the end results. Z
(Catalyst Incomplete)
(Evap Incomplete)
(https://i.imgur.com/NG5Ecrnh.jpg?1)(https://i.imgur.com/NG5Ecrnh.jpg?2)
Flex looks nice.. but as FoMoCoSHO aptly put it when its missing the two tiny turbos..."It has no soul".. and a purple flex looks like a giant rolling grape... IMHO...
Thanks FoMoCo and SBS! I guess being busy and all didn't realize the missing link (snails) Thanks though. Z
I have a couple of Ecoboost Performance Forums Decals left on hand for Free!
LMK and will have them mailed out ASAP! Thanks. Z :)
(https://i.imgur.com/cke6L4Qh.jpg?1)
Quote from: ZSHO on December 03, 2017, 10:44:25 AM
I have a couple of Ecoboost Performance Forums Decals left on hand for Free!
LMK and will have them mailed out ASAP! Thanks. Z :)
(https://i.imgur.com/cke6L4Qh.jpg?1)
id love one z! shall i just pm ya my address?
Sent from my iPhone using Tapatalk
Quote from: Colorado-SHOBro on December 03, 2017, 11:29:37 AM
Quote from: ZSHO on December 03, 2017, 10:44:25 AM
I have a couple of Ecoboost Performance Forums Decals left on hand for Free!
LMK and will have them mailed out ASAP! Thanks. Z :)
(https://i.imgur.com/cke6L4Qh.jpg?1)
id love one z! shall i just pm ya my address?
Sent from my iPhone using Tapatalk
Send me a Pm with your Info! Just hate typing on my phone. LOL. Enjoy. Z :)
I received the new Shell Gold rewards card which saves you 5 cents per gallon. Z :)
Nice!
Moved my racing helmet from the trunk to the garage... no need to carry it around for that "last minute trip" to the track.... until next year..
Yup, time to bring out the zamboni instead ...
(https://media1.tenor.com/images/54be61e6614d3f79e575292c62e5574f/tenor.gif?itemid=6225358)
LOL
I hadn't seen this one before. Hilarious!
(https://i.imgur.com/McfKtUw.jpg)
Ha ha, yes i saw this the other day. Too funny!
I test drove a brand new 18 XLT with Sport appearance and the first one of its kind and truly an awesome Suv but a bit pricey IMO but something to think about!
(https://i.imgur.com/mEEmJLHh.jpg?1) (https://i.imgur.com/3vlZCKlh.jpg?1)
Yeah this ius a good one.
What's the latest with this Net Neutrality ordeal!
Please no Politics! TIA Z
Quote from: ZSHO on December 14, 2017, 09:12:43 PM
What's the latest with this Net Neutrality ordeal!
Please no Politics! TIA Z
I've heard good arguments from both sides of the sewage trough. I live in a rural area. I'm 7 miles from two towns of about 7,000 people and 12 miles from a town of about 15,000 people. I'm about 35 miles from the middle belt of suburbs around Mpls./St. Paul and I have been waiting for "High Speed Internet" for 18 years now. My neighbors 1/2 a mile from me have fiber. I've lived in two other houses in that time both of which were a bit more rural than where I am now. Satellite sucks. I'm on an old school wireless antenna with a local company paying $115 a month for 5MB down and 2MB up. That's there highest package. You can watch one YouTube video at a time. It's been reliable and is just fine for one person but is too expensive for what I'm getting which ain't much. My issue is that the internet isn't a want or a privilege anymore when my three kids have to use it for school and me and the wife really can't do without it either. Nobody really can anymore unless maybe you're retired. So why am I and others in this position in this situation? It's the opposite of when electric and phone lines came into the rural areas. So am I supposed to pay twice the money for 10% of the service 90% of the population gets for the rest of my life? TV only compounds the problem because others have the luxury of watching TV on the net now too. If I want it I have to pay DirecTv or DISH. I pulled the plug on that 2 years ago. I cannot watch decent quality and still it buffers occasionaly TV on my internet. I have to go to the Netflix website to have my video quality lowered just to stream a video. Cell phones here only come in good enough in the fall when the leaves are down so I'm screwed 75% of the year there. What's gonna fix that for me guys and gals???
But I will never forget my grandfather that farmed in the Great Depression and fought in WWII. 8)
Economics. SMH. Population density and right of way when together will always get the best and newest first.
I can see both sides as well, but I don't understand how it passed. You know the government is broken when 82% of people are against net neutrality and it still passed.
It looks like the rich getting richer to me, but I'm willing to listen if there's proof of the opposite.
In the end, I just want unfiltered/unlimited access to all Internet content. I do not want to become China with limited access to world news.
I dunno, I don't remember any issues prior to net neutrality being signed into law.
It sure as hell didn't stop my cable bill from increasing and all I have is internet.
I don't have any more decent ISPs than I did prior.
So how did it benefit me exactly?
Quote from: FoMoCoSHO on December 15, 2017, 12:07:39 AM
I dunno, I don't remember any issues prior to net neutrality being signed into law.
It sure as hell didn't stop my cable bill from increasing and all I have is internet.
I don't have any more decent ISPs than I did prior.
So how did it benefit me exactly?
Its supposed to keep the internet balanced if you will... say you are using comcrap and they open a competing EcoboostPerformanceForum they can technically slow down or prevent you from using this forum (or the traffic that is coming from company hosting this forum) by making it price prohibitive to the forum hosting company to pass their traffic to comcrap... this is just a very simple and small example but in theory it could happen...
Problem is that there are only a few major providers of internet services for consumers... so there is no competition or incentive for them to NOT charge companies a lot of money to use provide content for their users...
Anyway.. for us middle class folk we always get the shaft...
There's a lot of misconception and misunderstanding on net neutrality. Prepare for a long post, as we are going to look at the details, enough to really put the issue to bed. This topic is right in my wheelhouse, so I can give you guys a lot of info on what it does and what it doesn't mean. If you're worried about political bias, I can tell you my voter registration card states "No party affiliation", because I don't feel either of them represent my interests.
I'm gunna use FoMoCoSHO's post as an example here
FoMoCoSHO says: "I dunno, I don't remember any issues prior to net neutrality being signed into law"
That's because we have essentially ALWAYS had net neutrality in place. It was enforced by the FCC at least as far back as 2010. Verizon sued the FCC over it in 2013. Verizon vs FCC resulted in an appeals court stating, in 2014, that the FCC did not have the authority to enforce the 2010 rules. So for the second half of 2014 we didn't have net neutrality, and in 2015 they passed the current laws. So really about 6 months in 2014 is the ONLY time we didn't have some form of NN protections in place.
FoMoCoSHO also says: "I don't have any more decent ISPs than I did prior."
He's 100% right. The reason being the NN rules have nothing to do with what ISPs are available to you. That is a totally different set of regulations that are usually done at the local level. It's usually a problem of local governments making deals with ISPs over who has access to the transmission lines. Enforcing or repealing NN has zero impact on this. NN only deals with preventing ISPs from interfering with what you see over the lines, not anything to do with who owns the lines.
So what does NN actually do then, and why should I care?
NN prevented ISPs from blocking or throttling what you look at on the internet. It sounds simple at first, but what it actually means is staggering. For example with NN you gave your provider your $80 a month and they gave you an open doorway to the internet. Where you go is your choice. Without NN, you still pay your provider, but they decide what sites they let you see. If your provider partners with Hulu, they can decide to simply not offer access to YouTube. Your provider can make a deal with Amazon to throttle (artificially slow down) traffic to Netflix, so that Netflix feels crappy, and subscribers switch to Amazon Prime. They can say "Your $50 a month package only includes these 20 websites. If you want to look at your car forum, that's another $2.99." It gets worse because the ISP can charge on the other end too. The can say "Mr. Ecoboostperformanceforum, if you would like to be offered to our customers you will need to pay Comcast to be listed as a partnered site."
The lack of NN kills start ups. Without NN we would never have gotten Skype. Some of the telecom companies were sued because they were blocking apps that used Voice Over IP. VOIP competed with the cell plans that they offered, so they tried to kill the competition by blocking that traffic. They only stopped because they were forced to. Any startup that competes with anything your ISP does, in ANY WAY, can just be blocked by your ISP.
If you're ISP decides to get political, they can block news sites that publish stories that are harmful to the ISPs bottom line. A CEO can do what Hobby Lobby did, and claim religious beliefs to block everyone from any sites that they personally disagree with. An ISP can even lobby a politician and offer to block access to news sites that support other candidates.
By removing the NN rules, we are still stuck with the same limited choices in ISP. Even monopolies in some areas. NN was not intended to address that issue. Now those monopolies are given more control over what we are allowed to see and do with the internet.
This is the reason 80% of the country wants NN rules left in place. The only ones who benefit from their removal are telecom companies. Which makes it so frustrating that the chair of the FCC is Ajit Pai. A man with very questionable connections to Verizon.
I feel shafted......
New video from(FTM) on 2001-2012 Ford Escape: Front Suspension Quick Strut Install which can apply to many applications. Z
http://youtu.be/wA0SMZ9tdTI (http://youtu.be/wA0SMZ9tdTI)
My daughter's 2016 Hyundai Accent did what it was supposed to do and protected her from injury this week.
She slightly bumped her head on the side window, the car was totaled. She pulled out in front of a Lincoln MKX. Hit center of the front wheel, car kicked around and the other side hit the curb as the back corner hit the same car that hit her. Interesting that no airbags delayed.
Owned it for 11 months, got a really good deal when new, so, actually coming out ahead of pay off.
Now that Ford offers a real transmission in the 2018 Focus, the 6F15, we are going to look at a 1.0 Focus and she wants to look at the Hyundai again. The 6F15 is a light duty version of the 6F35. (So far, my son is having good luck with the 1.0 in his 2014 Fiesta 5spd, at 42k trouble free miles now.)
(https://uploads.tapatalk-cdn.com/20171216/51610136a1417afbf6f68a0787b2be67.jpg)
Sent from my XT1094 using Tapatalk
Holy crap! Glad she is ok nothing serious.
Really glad that she was not hurt!!
On a different note, would your son like a tune on that 1.0 liter? I would like to tune one lol...If you would like to buy an SCT device I'll tune it for free ;D
Yikes, and double Yikes! Hope she gets 100% real soon. Too bad about the car, but like you said, it did its' job.
As an aside, a spate of similar accidents have us reeling on the Ford Edge FB pages.
That's awful especially nearing the Holiday Season!! hoping for a full speedy recovery.
markssho - Please keep us updated on all counts! Z
Here's a Great new video from (FTM) on Ford Quick Tips #81: Removing Rusted Stuck Oxygen Sensors the Easy Way! Z
http://youtu.be/Yk6AM4wqm-0 (http://youtu.be/Yk6AM4wqm-0)
I found this Great "HOW TO" replace Wheel and Hub Replacement on a 13+SHO/MKS/FLEX
50+ PICS Included! Z :)
https://imgur.com/gallery/EA9Oj
Right when I think I am done with my tune @AJPTurbo always finds a way to surprise me... new exciting adjustments... can't wait for track season to start again.. extra boost and better tires along with some more special sauce from Brad... 11's on pump gas with meth on stock turbos is what I predict... assuming a good DA..
Quote from: StealBlueSho on December 21, 2017, 09:30:42 AM
Right when I think I am done with my tune @AJPTurbo always finds a way to surprise me... new exciting adjustments... can't wait for track season to start again.. extra boost and better tires along with some more special sauce from Brad... 11's on pump gas with meth on stock turbos is what I predict... assuming a good DA..
He's cookin up something for me as well...
I've never considered that my tune would ever be done, lol.
He's working on mine as well... So far it's been bad news with my car it doesn't seem to like higher boost Brad says the wastegate duty cycles are too high and my boost tapers and I'm not maintaining it and it's over working the turbos cutting their life short or I have a boost leak somewhere but I've checked all my clamps and pipes EPP hard pipes.
I changed my tune to a lower boost see if it helps any. I'm on the edge to hear back from him hopefully some good news.
Sent from my Moto Z (2) using Tapatalk
On another note I got pulled over today for not having my front license plate I guess is time to finally install the electric plate hiding thingy. Luckily it was only a warning
Sent from my Moto Z (2) using Tapatalk
Quote from: BoostfoSHO on December 21, 2017, 09:38:20 PM
He's working on mine as well... So far it's been bad news with my car it doesn't seem to like higher boost Brad says the wastegate duty cycles are too high and my boost tapers and I'm not maintaining it and it's over working the turbos cutting their life short or I have a boost leak somewhere but I've checked all my clamps and pipes EPP hard pipes.
I changed my tune to a lower boost see if it helps any. I'm on the edge to hear back from him hopefully some good news.
Sent from my Moto Z (2) using Tapatalk
Any possibility of your wastegate mod sticking open?
Quote from: FoMoCoSHO on December 21, 2017, 10:06:44 PM
Quote from: BoostfoSHO on December 21, 2017, 09:38:20 PM
He's working on mine as well... So far it's been bad news with my car it doesn't seem to like higher boost Brad says the wastegate duty cycles are too high and my boost tapers and I'm not maintaining it and it's over working the turbos cutting their life short or I have a boost leak somewhere but I've checked all my clamps and pipes EPP hard pipes.
I changed my tune to a lower boost see if it helps any. I'm on the edge to hear back from him hopefully some good news.
Sent from my Moto Z (2) using Tapatalk
Any possibility of your wastegate mod sticking open?
He said this particular issue was showing before the mod and after the mod. Plus I don't hear the wastegate open until upshifts only. It's very noticeable when it opens.
Sent from my Moto Z (2) using Tapatalk
I spotted a SHO early today parked all the way in the back corner parking lot! Lol. Z
(https://i.imgur.com/nNhRKMWh.jpg?1)(https://i.imgur.com/xn7q7K4h.jpg?1)
Shoulda gone and parked RIGHT next to it, LOL.
Thats about how far out I park and no matter what time a day or how busy it is there tends to be some moron who will just park right next to it.
I started using planters, etc to protect at least one side.
Fairly good representation of what it was like when my front turbo started leaking oil....
(https://media1.tenor.com/images/35e0bc32c5090fa7b64371a331bd3050/tenor.gif?itemid=4928638)
LOL
Anyone on here? Z
http://youtu.be/td7AIzOy2Fc (http://youtu.be/td7AIzOy2Fc)
I finally started up the SHO after sitting a full weeks time in sub-zero weather without any issues whatsoever.
I guess when the time comes might look into an Exide battery ! Dunno! As the Motorcraft 850 has served me quite well without any hiccups to mention. Z :)
$162.39 with shipping and promo-code applied. Z
EXIDE EDGE FLAT-PLATE AGM - CCA: 750; BCI Group : 65[/color]
Exide Edge AGM Batteries are designed to maximize energy capacity and protect against battery failure, helping them to stay strong and perform like new for longer! The Absorbed Glass Mat design is 100% leak and spill proof because the Electrolyte is permanently held in the glass mat separator instead of free flowing within each cell. Oxygen recombination reduces water loss and reassures maintenance-free performance. From a performance perspective, the AGM battery boasts better recharge capability while providing up to 3 times more starts per cycle and produces more power per cycle.
Product life lasts up to two times longer
Extremely heat and cold tolerant
Ideal for vehicles equipped with lots of electronics (heated seats, navigation system, parking assist)
Durable - Outstanding vibration resistance
Safer - No free-flowing electrolyte or spill hazard.
Cold Crank Amperage (CCA) 750
Crank Amperage 900
Reserve Capacity (RC) at 25Amp 130
Amp Hour (Ah) Capacity (20hr) 68
Volts 12
Group Size 65
Terminal Type A
Handle Yes
Length 11 - 1/16 in.
Width 7 - 3/16 in.
Height 7 - 1/2 in.
EXIDE Warranty Information
48 Months
http://www.rockauto.com/en/moreinfo.php?pk=8928792&cc=1430807&jsn=9 (http://www.rockauto.com/en/moreinfo.php?pk=8928792&cc=1430807&jsn=9)
A good friend of mine is running the Exide battery in his wife's Edge, with no issues to date. Has been several months now.
Quote from: SHOdded on January 03, 2018, 03:35:17 PM
A good friend of mine is running the Exide battery in his wife's Edge, with no issues to date. Has been several months now.
Cool Beans! Z :)
Quote from: jbrown9999 on December 27, 2017, 03:50:10 PM
Thats about how far out I park and no matter what time a day or how busy it is there tends to be some moron who will just park right next to it.
I started using planters, etc to protect at least one side.
I do the same and 9 times out of 10 it will be a woman that parks next to you. Wimmin park next to vehicles, not between lines. Maybe because they're shorter? I dunno. Nobody's figured them out yet....
Quote from: SilvererSHO on January 03, 2018, 08:01:36 PM
Quote from: jbrown9999 on December 27, 2017, 03:50:10 PM
Thats about how far out I park and no matter what time a day or how busy it is there tends to be some moron who will just park right next to it.
I started using planters, etc to protect at least one side.
I do the same and 9 times out of 10 it will be a woman that parks next to you. Wimmin park next to vehicles, not between lines. Maybe because they're shorter? I dunno. Nobody's figured them out yet....
And never will....
Quote from: FoMoCoSHO on January 03, 2018, 10:41:07 PM
Quote from: SilvererSHO on January 03, 2018, 08:01:36 PM
Quote from: jbrown9999 on December 27, 2017, 03:50:10 PM
Thats about how far out I park and no matter what time a day or how busy it is there tends to be some moron who will just park right next to it.
I started using planters, etc to protect at least one side.
I do the same and 9 times out of 10 it will be a woman that parks next to you. Wimmin park next to vehicles, not between lines. Maybe because they're shorter? I dunno. Nobody's figured them out yet....
And never will....
That all depends how they look like! Maybe it's a sign there trying to get close to you! LOL. Z :D
Love the drivebrights so far one of my favorite mods especially since I have the DRL's on through forscan they're Amber when the lights are off like DRL's and white when lights come on. (https://uploads.tapatalk-cdn.com/20180104/772c5cf0d56bb999122ef22920403a2a.jpg)
Sent from my Moto Z (2) using Tapatalk
(https://uploads.tapatalk-cdn.com/20180104/3c21daebd85d1e37cc8c16d45bf876e8.jpg)
Brrrrrrright! Who needs headlamps LOL.
Anyone?
https://www.etsy.com/listing/263543385/domed-ford-ecobeast-emblem-overlays?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=2013+ford+ecobeast&ref=sr_gallery_1 (https://www.etsy.com/listing/263543385/domed-ford-ecobeast-emblem-overlays?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=2013+ford+ecobeast&ref=sr_gallery_1)
Quote from: SilvererSHO on January 04, 2018, 06:07:14 PM
Anyone?
https://www.etsy.com/listing/263543385/domed-ford-ecobeast-emblem-overlays?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=2013+ford+ecobeast&ref=sr_gallery_1 (https://www.etsy.com/listing/263543385/domed-ford-ecobeast-emblem-overlays?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=2013+ford+ecobeast&ref=sr_gallery_1)
I got that one and the SHO ones that cover the Ford logos abd the steering wheel one. They're nice the Ford logos ones are like gel (https://uploads.tapatalk-cdn.com/20180105/f4252376d208b0ea81ae88f0864710be.jpg)
Sent from my Moto Z (2) using Tapatalk
Quote from: BoostfoSHO on January 04, 2018, 08:15:02 AM
Love the drivebrights so far one of my favorite mods especially since I have the DRL's on through forscan they're Amber when the lights are off like DRL's and white when lights come on. (https://uploads.tapatalk-cdn.com/20180104/772c5cf0d56bb999122ef22920403a2a.jpg)
Sent from my Moto Z (2) using Tapatalk
(https://uploads.tapatalk-cdn.com/20180104/3c21daebd85d1e37cc8c16d45bf876e8.jpg)
I like the Drivebrights being amber like that normally. I have them on my car as well. Can you shoot me the link to the Hex you need to change to turn the DRL's on? I have the AWD gauge enabled already.
Thanks!
Quote from: ecoboostsho on January 08, 2018, 01:38:33 PM
Quote from: BoostfoSHO on January 04, 2018, 08:15:02 AM
Love the drivebrights so far one of my favorite mods especially since I have the DRL's on through forscan they're Amber when the lights are off like DRL's and white when lights come on. (https://uploads.tapatalk-cdn.com/20180104/772c5cf0d56bb999122ef22920403a2a.jpg)
Sent from my Moto Z (2) using Tapatalk
(https://uploads.tapatalk-cdn.com/20180104/3c21daebd85d1e37cc8c16d45bf876e8.jpg)
I like the Drivebrights being amber like that normally. I have them on my car as well. Can you shoot me the link to the Hex you need to change to turn the DRL's on? I have the AWD gauge enabled already.
Thanks!
IIRC for the DRL's you don't have to change a hexcode like for the AWD gauge. It's just in the drop down menu for one of the modules but I can't remember which one.
Sent from my Moto Z (2) using Tapatalk
Thanks for the reply. I've got a 2013 and don't have a drop down menu for it in the BCM. That said I found this and will try it later.
DRL 726-11-01 xXxx xxxx xx 0=disabled 1=headlight at reduced output 2=fog lights 3=front turn signal only top bulb on each side
Quote from: ecoboostsho on January 08, 2018, 02:27:02 PM
Thanks for the reply. I've got a 2013 and don't have a drop down menu for it in the BCM. That said I found this and will try it later.
DRL726-11-01xXxx xxxx xx0=disabled 1=headlight at reduced output 2=fog lights 3=front turn signal only top bulb on each side
Nice I'm glad you found it. Hopefully it works. It really makes the car look better with the amber DRL's. IMHO
Sent from my Moto Z (2) using Tapatalk
Quote from: BoostfoSHO on January 08, 2018, 03:39:34 PM
Quote from: ecoboostsho on January 08, 2018, 02:27:02 PM
Thanks for the reply. I've got a 2013 and don't have a drop down menu for it in the BCM. That said I found this and will try it later.
DRL726-11-01xXxx xxxx xx0=disabled 1=headlight at reduced output 2=fog lights 3=front turn signal only top bulb on each side
Nice I'm glad you found it. Hopefully it works. It really makes the car look better with the amber DRL's. IMHO
Sent from my Moto Z (2) using Tapatalk
It worked and I really like it! I also changed the # of flashes for the quick turn signal press.
Sent from my XT1650 using Tapatalk
Nice that's good to hear it looks so good too. I also changed the blinker. I need to change the double horn thing I thought it was cool but its so freaking annoying I've started to hate it.
Sent from my Moto Z (2) using Tapatalk
Has anyone try to install modify led lights on the outside mirrors for turn signal lights.
It might be my next project once the weather warms up a bit. Z :)
39.79 ea
https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,body,parking+/+turn+signal+lamp+assembly,11719 (https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,body,parking+/+turn+signal+lamp+assembly,11719)
https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,body,parking+/+turn+signal+lamp+assembly,11719 (https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,body,parking+/+turn+signal+lamp+assembly,11719)
It looks like the sub-zero weather contributed to the Hood shocks failing with the wind gust slamming the Hood on the back of my Big Head while checking the fluids during this mild windy day of all days and my head is pounding! Dunno! Z :headhurt: :pat: :headhurt:
I ordered a set of front shocks for the hood with a grand total of $30.04
SACHS SG404092 $12.13 ea
Sachs Lift Supports Feature:
Linear spring characteristics for application of force across the entire range of movement.
Fast and easy mounting.
Smooth operation in all temperature extremes. Between -20°F (-30°C) and 176°F (+80°C).
http://www.rockauto.com/en/moreinfo.php?pk=4435677&cc=1503823&jsn=451 (http://www.rockauto.com/en/moreinfo.php?pk=4435677&cc=1503823&jsn=451)
?! OW ? My car just hates me .. your's is trying to kill you!
Dang, Z, hope you are OK! Those hoods are HEAVY!!!
Quote from: SHOdded on January 12, 2018, 05:49:38 PM
Dang, Z, hope you are OK! Those hoods are HEAVY!!!
I appreciate the concern! I think the bump on my head did me some good! LOL. Z
LOL. Hope that is true!!!
I smacked my head on my open trunk that due to cold weather didn't quite make it all the way open. Right on the leading edge, a few choice words were yelled for sure. That pricing for the shocks is not bad, would have expected more for sure.
Quote from: ncole on January 15, 2018, 12:05:41 PM
I smacked my head on my open trunk that due to cold weather didn't quite make it all the way open. Right on the leading edge, a few choice words were yelled for sure. That pricing for the shocks is not bad, would have expected more for sure.
Glad you're Okay! I also was trying to keep the fudge word @ bay while posting! Z :-X
LOL
Well times are sure changing. Just read Englishtown Raceway Park is shutting down after 52 years. The are reorganizing there business and drag racing is no longer a part of the it. Big time bummer.
:o what else is there besides drag racing!!!
I am SOO over winter Right Now, 10 Deg Out, Gate is Frozen
I am Frozen, No motivation to Shovel, This Is Getting Me Down,
I am looking forward to 20 to 30 Deg Heat wave by Friday HA :yuk:
Crazy crazy weather.
https://www.atpturbo.com/root/releases/release110214.html (https://www.atpturbo.com/root/releases/release110214.html)
http://www.turbo-match.com/detailedturbosearch.php?boxmake2=Ford&boxmodel2=taurus+sho&boxyear2=2013&boxdisplacement2=3.5+liter&getdisplacementunits2=1&boxhorsepower2=365&boxcylinders2=6 (http://www.turbo-match.com/detailedturbosearch.php?boxmake2=Ford&boxmodel2=taurus+sho&boxyear2=2013&boxdisplacement2=3.5+liter&getdisplacementunits2=1&boxhorsepower2=365&boxcylinders2=6)
https://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-SHO-001&Category_Code=35V6TRAN (https://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-SHO-001&Category_Code=35V6TRAN)
http://www.atpturbo.com/root/navigation/turboinfo.htm (http://www.atpturbo.com/root/navigation/turboinfo.htm) .Z
I finally took out the SHO Today after 3 weeks of hibernation only starting the car once a week for roughly 20 min per day and found the (BMS) on today which was expected especially during the sub-zero weather we had!
I will hopefully have some time tomorrow to take it out for a longer extended period of time and monitor for any changes!
It was honestly a nice feeling driving the SHO after such a long period of time. Z :)
I bet! Puts smiles on faces :)
So I was thinking about Washing the PI Today, and it started
raining, and as i was looking at it, I Noticed that some Jack Wagon
had Given me a Love tap in the last Parking Lot I was in Yesterday
You SOB, there's another 100.00 to get a replacement
Quote from: irondoor19 on January 22, 2018, 03:12:01 PM
So I was thinking about Washing the PI Today, and it started
raining, and as i was looking at it, I Noticed that some Jack Wagon
had Given me a Love tap in the last Parking Lot I was in Yesterday
You SOB, there's another 100.00 to get a replacement
Looks like it extended into the paint, just below the assembly, on the rear bumper cover. Kind of triangular in shape.
That sucks.
Sent from my SM-N950U using Tapatalk
Ugh-ly :( well we know with these cars not to expect them to stay original. You can do everything right ... And still get tagged.
Sorry about that happened to you. This is why I hate people and park literally as far away from the doors of where ever I am, preferably with a curb/island on one side.
On a few occasions some idiot still has parked next to me, literally 50+ empty spots closer but they park next to me!
Like I said, I hate people!
New video from (FTM) on 2002-2010 Ford Explorer Front Lower Ball Joint Replacement! Z :) Good stuff!
! No longer available (http://www.youtube.com/watch?v=_8usncNZwvg#)
I ordered a set of new Fog lights for my newly acquired Jeep from www.amazon.com (http://www.amazon.com) through a third party from UK for a Grand total of
$10.24 :o @ $0.47 ea
Arriving Feb 7 - Feb 22
2 of Osram H11 (711) Night Breaker Unlimited +110% Performance Bulb (x1) 64211NBU-01B
(https://i.imgur.com/NruLEThh.jpg)
Quote from: ZSHO on January 23, 2018, 10:14:29 AM
I ordered a set of new Fog lights for my newly acquired Jeep from www.amazon.com (http://www.amazon.com) through a third party from UK for a Grand total of
$10.24 :o @ $0.47 ea
Arriving Feb 7 - Feb 22
2 of Osram H11 (711) Night Breaker Unlimited +110% Performance Bulb (x1) 64211NBU-01B
I think you will like them a LOT. That and the Philips eXtremeVision are tops in my book for plugnplay halogens. LEDs are getting better too. Look into JDM ASTAR's offerings. Work much better with projectors than reflectors, of course.
JDM really?? Putco LED is what you want for top quality
Well, if we are going to get into this, I will up you one and call. Diode Dynamics.
I appreciate the kind replies from ^^^. I tried the Sylvania zxe and the over rated Piaa in my other vehicles without success but just couldn't pass up the Osrams especially @ that price-point! :)
Much cheaper than what I pd lol.
I was curious if anyone has seen this intercooler? thoughts! TIA! Z
It seems the seller just launched! Dunno!
There are two versions!
I wonder if any gains can be had! Probably only good for aesthetics!
CSF 6015 - 2010-2014 Ford/Lincoln Flex/Taurus/MKS/MKT Intercooler OE: AA5Z6K775B
$400.00
Intercooler CSF 6015
$168.30
(https://i.imgur.com/Iw9b9Kom.jpg)
(https://i.imgur.com/n202tMKh.jpg)
https://www.ebay.com/p/Intercooler-CSF-6015/179228646?iid=122311087071&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D44039%26meid%3D2e24750bc45e41caa7fc515fc4b86e2d%26pid%3D100623%26rk%3D2%26rkt%3D6%26sd%3D282603419917%26itm%3D122311087071&_trksid=p2047675.c100623.m-1 (https://www.ebay.com/p/Intercooler-CSF-6015/179228646?iid=122311087071&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D44039%26meid%3D2e24750bc45e41caa7fc515fc4b86e2d%26pid%3D100623%26rk%3D2%26rkt%3D6%26sd%3D282603419917%26itm%3D122311087071&_trksid=p2047675.c100623.m-1)
https://www.ebay.com/itm/CSF-6015-2010-2014-Ford-Lincoln-Flex-Taurus-MKS-MKT-Intercooler-OE-AA5Z6K775B/282603419917?epid=179228646&hash=item41cc79f90d:g:ysYAAOSwLWBZidbq&vxp=mtr (https://www.ebay.com/itm/CSF-6015-2010-2014-Ford-Lincoln-Flex-Taurus-MKS-MKT-Intercooler-OE-AA5Z6K775B/282603419917?epid=179228646&hash=item41cc79f90d:g:ysYAAOSwLWBZidbq&vxp=mtr)
Good Article on the PTU! Z
Power Takeoff Units -new bearing design
The power takeoff unit (PTU) has been a service concern on some PI Utilities. There may be an excessive oil smell when driving, the AWD may not work properly, or the PTU housing may be cracked, leaking or noisy. The cause of the PTU damage is the excessive torque loading of the idler gear, which causes the bearing to walk (move) into the housing.
In January 2014, a Full Face Thrust Washer, FFTW, was introduced. This new washer was designed to prevent the idler bearing from walking into the aluminum case. In October 2015, a second change was made, in this case a loose-fit idler bearing. In dynamometer tests, this bearing design change showed a twice life improvement over the FFTW design.
In June 2016, a third change was made. In this case, a new bearing design, one without drawn cups, was installed. This eliminated the walk mode of damage. Dyno testing shows a three to four times improvement over the FFTW design. For both the PI Utility and PI Sedan, the PTU is covered under the limited powertrain warranty. All Ford Police Interceptors come standard with a five-year/100,000-mile Extended Service Plan for the powertrain.
http://www.hendonpub.com/resources/article_archive/results/details?id=5858 (http://www.hendonpub.com/resources/article_archive/results/details?id=5858) . Z
A very important note indeed! Perhaps a mention in a drivetrain topic would give it the visibility it needs.
http://2017fordcar.com/common-problems-ford-ecoboost/ (http://2017fordcar.com/common-problems-ford-ecoboost/) .Z
(https://i.imgur.com/vM2gsWah.jpg)
Best Fuel Injector Cleaners 2018 – Buyer's Guide and Reviews.
February 1, 2018! Z
https://www.yourbestpicks.com/best-fuel-injector-cleaners/ (https://www.yourbestpicks.com/best-fuel-injector-cleaners/) .Z
Sometimes I forget how BIG these cars are... between the tune and the Megan's it's pretty easy....
Walking out of the store today my car (which I managed to get a parking spot up front) I noticed dwarfed everything but the trucks in the parking lot...
She is one big ol' B!tch...
Sent from my iPhone using Tapatalk
LOL
I haven't been feeling my best as of late so the wife cooked her signature dish. Z
(https://i.imgur.com/oLzPgThh.jpg)
Awwww, too sweet! You are a fortunate man, Z!
What's up with the bright colored tow hooks on the back of the tegras?
Sent from my iPhone using Tapatalk
Out making a Delivery to a Customer, Leaving after it was Done,
Caught a Curb with the Brand New Rear Goodyear, and Wasted it,
Spare was oddly the Wrong size (1" plus Bigger) So advance trac
did not like this, I had another New Used one mounted, and Ordered
One More New One, Now 117.00 on Ebay....
and the traction Control is still giving me Fits, May have cleared up TODAY.
SO Why is every time I turn Around it cost me another Hundo.....?
:o
Quote from: stealbluesho on February 07, 2018, 07:43:45 AM
What's up with the bright colored tow hooks on the back of the tegras?
Sent from my iPhone using Tapatalk
Easy answer, so they can be pulled out of ditches easier after their street racing is done for the night. They used to get pulled out from the Yuban can but those weren't welded on good enough so they came up with this. It's bright colored for easier night time tow hook ups.
(https://uploads.tapatalk-cdn.com/20180207/a10af0a57a35113d6c6d093d5fdbdf52.jpg)
What can I say? I like em wet...
Sent from my iPhone using Tapatalk
:thumb:
I guess after having TWO Airaid CAI this AEM Dryflow Flat panel Filter feels right @ Home and seems to be a better alternative IMHO and THE BEST DARN $30.00 EVER SPENT! Z
(https://i.imgur.com/znsl1phh.jpg)
Quote from: ZSHO on February 08, 2018, 06:08:42 PM
I guess after having TWO Airaid CAI this AEM Dryflow Flat panel Filter feels right @ Home and seems to be a better alternative IMHO and THE BEST DARN $30.00 EVER SPENT! Z
(https://i.imgur.com/znsl1phh.jpg)
Two CAI? There some backstory to that I am missing?
Quote from: ZSHO on February 08, 2018, 06:08:42 PM
I guess after having TWO Airaid CAI this AEM Dryflow Flat panel Filter feels right @ Home and seems to be a better alternative IMHO and THE BEST DARN $30.00 EVER SPENT! Z
Welcome to the dark side, LOL! Have em in both the Edge and F-Sport.
I have a K&N Typhoon and an Airaid...sitting on the floor in my garage.
Rollin clean with OEM/paper.
Since I know Z is super OCD, i know he will check inside the tube for debris after some miles have accumulated. If he can't find any tiny and shiny specs of silicon I might try the AEM.
FoMoCo knows me quite well! might need to change my "username" to OCD! Lol. Z
ZSHOCD - hmmm ...
Quote from: ZSHO on February 09, 2018, 06:15:06 AM
FoMoCo knows me quite well! might need to change my "username" to OCD! Lol. Z
OCZ?
Brings to mind a premium line of computer hardware - LIKE it!
New video from (FTM) on Ford 8.8" 9.75" 10.25" Rear Differential Service: Fluid Change Procedure! Z :)
http://youtu.be/-LIm-YZ4DUI (http://youtu.be/-LIm-YZ4DUI)
It has been quite an interesting week with the Flu Bug virus or whatever they wanna call it has certainly taken a Toll out of me from A-Z!
Its quite sad even with todays modern technology they cannot establish a proper diagnosis! :(
Today wake-up to no Heat in the House (what else is new) Lol but luckily was able to find the Tranducer motor exhaust out in N.J ! And its working as designed! :)
But while trying to beat the early 12:00 closing deadline took the SHO to make sure I get there on time and with that being said noticed the car pulls much harder especially @ TOP end!
Im still @ a loss for words and wondering if the newly installed Charge pipes have something to do with it!!!!!!
I guess with almost 60K on the SHO know every inch of this car so highly Doubt it's my imagination! Dunno! Z
Was there a tear and/or leak at the old charge pipe couplers?
Sent from my iPhone using Tapatalk
Quote from: stealbluesho on February 11, 2018, 02:30:59 PM
Was there a tear and/or leak at the old charge pipe couplers?
Sent from my iPhone using Tapatalk
The clamp by the saxophone was stripped but will have to take a look @ the front hose coupler! Thanks for the quick reply SBS! Z
Nice to hear some good came out of the charge pipe swap. Cooler air probably the reason why, that heat tape must actually work!
My random thought for the day...... ?
I'm growing tired of Mother Nature.
18" of snow over last few days, and having to work back to back 12hr night shifts.... only to be greeted each morning to having to spend 2hrs unearthing my driveway, and property, is becoming exhausting.
Enough already. Where is Spring....???
(https://uploads.tapatalk-cdn.com/20180211/78f582a62adc1ee1dd7f56e58ecaa52f.jpg)
Man, that's ROUGH! Although I do not like drowning in rain, at least I don't have to shovel it off ...
Speaking of snow, I did purchase a new SHO this year, exclusively for winter use.(https://uploads.tapatalk-cdn.com/20180211/b13de9ef316b56ee8b834c28f9d38175.jpg)(https://uploads.tapatalk-cdn.com/20180211/0cb3a5d6e8e06f29b6fbf35d524705f9.jpg)
Sent from my OnePlus 5 using Tapatalk
Soooo... when it comes to brass tacks does the secondaries open?!!
Sent from my iPhone using Tapatalk
No secondaries, just a single-barrel carb, but it'll launch snow & ice across the street if I'm so inclined. There is an EFI version, but the reviews were not great, so I opted for the carbureted version.
Sent from my iPhone using Tapatalk
Quote from: bpd1151 on February 11, 2018, 04:59:02 PM
My random thought for the day...... ?
I'm growing tired of Mother Nature.
18" of snow over last few days, and having to work back to back 12hr night shifts.... only to be greeted each morning to having to spend 2hrs unearthing my driveway, and property, is becoming exhausting.
Enough already. Where is Spring....???
(https://uploads.tapatalk-cdn.com/20180211/78f582a62adc1ee1dd7f56e58ecaa52f.jpg)
65F here in VA .... just sayin....
Sent from my iPhone using Tapatalk
HOT! PCM & More! ! Brand New video from (FTM) on Save Money Using a Junkyard Engine Control Module: DON'T LET YOUR DEALER TELL YOU IT CAN'T BE DONE! Z
http://youtu.be/Hhk7Wg0i3KE (http://youtu.be/Hhk7Wg0i3KE)
Quote from: ZSHO on February 12, 2018, 02:52:57 PM
HOT! PCM & More! ! Brand New video from (FTM) on Save Money Using a Junkyard Engine Control Module: DON'T LET YOUR DEALER TELL YOU IT CAN'T BE DONE! Z
http://youtu.be/Hhk7Wg0i3KE (http://youtu.be/Hhk7Wg0i3KE)
When I glanced at the recent topics I thought you were peddling stolen PCMs, lol...
Quote from: FoMoCoSHO on February 12, 2018, 11:37:11 PM
Quote from: ZSHO on February 12, 2018, 02:52:57 PM
HOT! PCM & More! ! Brand New video from (FTM) on Save Money Using a Junkyard Engine Control Module: DON'T LET YOUR DEALER TELL YOU IT CAN'T BE DONE! Z
http://youtu.be/Hhk7Wg0i3KE (http://youtu.be/Hhk7Wg0i3KE)
When I glanced at the recent topics I thought you were peddling stolen PCMs, lol...
It does seem that way! Lol! But turned my life around for the Good! Z :)
PCP / PCM same thing. They make you go faster. LOL
Quote from: Macgyver on February 13, 2018, 05:48:38 PM
PCP / PCM same thing. They make you go faster. LOL
Don't forget Meth.
Technology @ its finest! Z :(
https://www.google.com/amp/s/jalopnik.com/fiat-chrysler-pushed-a-uconnect-update-that-causes-cons-1822939437/amp (https://www.google.com/amp/s/jalopnik.com/fiat-chrysler-pushed-a-uconnect-update-that-causes-cons-1822939437/amp) :(
Don't say anything bad about the media darling! Only Ford has buggy software. LOL.
Quote from: SHOdded on February 14, 2018, 07:06:10 AM
Don't say anything bad about the media darling! Only Ford has buggy software. LOL.
True indeed!! Sometimes simple is better! Z
I will be replacing the outer tie-rods in conjunction with new Timken (HD) Hubs(wheel bearings)in the coming weeks! Z
MOOG ES800222 {#5F9Z3A130AA, 8A5Z3A130A, 9G1Z3A130A} Problem Solver Outer
$37.79 ea
http://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,steering,tie+rod+end,7428 (http://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,steering,tie+rod+end,7428)
http://www.rockauto.com/en/moreinfo.php?pk=1832146&cc=1503823&jsn=21 (http://www.rockauto.com/en/moreinfo.php?pk=1832146&cc=1503823&jsn=21)
http://www.moogparts.com/technical.html (http://www.moogparts.com/technical.html)
http://www.fme-cat.com/overlays/part-detail.aspx?pNum=ES3609&partType=Tie%20Rod%20End&brandId=MC (http://www.fme-cat.com/overlays/part-detail.aspx?pNum=ES3609&partType=Tie%20Rod%20End&brandId=MC)
http://www.moogparts.com/pdf/problemsolver/english/MOOG_PS_Bulletin_216001_ES800781_ES800782_EN.pdf (http://www.moogparts.com/pdf/problemsolver/english/MOOG_PS_Bulletin_216001_ES800781_ES800782_EN.pdf)
(https://i.imgur.com/grd9sZ5h.png)
MOOGs, eh? Wheel bearings ... again? Maybe SKF if we can find some stock.
SKF BR930916 not sure if meant for the Perf Pkg or not
Quote from: SHOdded on February 14, 2018, 06:15:40 PM
MOOGs, eh? Wheel bearings ... again? Maybe SKF if we can find some stock.
SKF BR930916 not sure if meant for the Perf Pkg or not
Hmm! something to consider! Thanks! Z
PEANUT BUTTER!!!!
Quote from: stealbluesho on February 18, 2018, 05:05:27 PM
PEANUT BUTTER!!!!
https://www.littlethings.com/peanut-butter-xylitol-kills-dog/ (https://www.littlethings.com/peanut-butter-xylitol-kills-dog/)
#WINNING !(https://uploads.tapatalk-cdn.com/20180219/56761adfe57d73c9c13a84b6a0b7918c.jpg)
Quote from: SilvererSHO on February 19, 2018, 12:58:43 PM
Quote from: stealbluesho on February 18, 2018, 05:05:27 PM
PEANUT BUTTER!!!!
https://www.littlethings.com/peanut-butter-xylitol-kills-dog/ (https://www.littlethings.com/peanut-butter-xylitol-kills-dog/)
Yea, this is why we only get organic peanut butter... peanuts and oil are the only ingredients.
Sent from my iPhone using Tapatalk
Quote from: stealbluesho on February 19, 2018, 01:34:11 PM
Quote from: SilvererSHO on February 19, 2018, 12:58:43 PM
Quote from: stealbluesho on February 18, 2018, 05:05:27 PM
PEANUT BUTTER!!!!
https://www.littlethings.com/peanut-butter-xylitol-kills-dog/ (https://www.littlethings.com/peanut-butter-xylitol-kills-dog/)
Yea, this is why we only get organic peanut butter... peanuts and oil are the only ingredients.
Sent from my iPhone using Tapatalk
Good deal. We make our own dogfood so I've looked in to a lot of this stuff. Lots of food you wouldn't expect are a no-go for our canine friends.
Quote from: SilvererSHO on February 19, 2018, 01:39:36 PM
Quote from: stealbluesho on February 19, 2018, 01:34:11 PM
Quote from: SilvererSHO on February 19, 2018, 12:58:43 PM
Quote from: stealbluesho on February 18, 2018, 05:05:27 PM
PEANUT BUTTER!!!!
https://www.littlethings.com/peanut-butter-xylitol-kills-dog/ (https://www.littlethings.com/peanut-butter-xylitol-kills-dog/)
Yea, this is why we only get organic peanut butter... peanuts and oil are the only ingredients.
Sent from my iPhone using Tapatalk
Good deal. We make our own dogfood so I've looked in to a lot of this stuff. Lots of food you wouldn't expect are a no-go for our canine friends.
When we had our first boxer who had lots of food allergies we made our own dog food. It's definitely a bit more work!
Sent from my iPhone using Tapatalk
Quote from: bpd1151 on February 19, 2018, 01:29:27 PM
#WINNING !(https://uploads.tapatalk-cdn.com/20180219/56761adfe57d73c9c13a84b6a0b7918c.jpg)
The shell by my house has terrible 93.... I always get some part throttle KR with it... sheetz has better gas my way.
Sent from my iPhone using Tapatalk
Quote from: bpd1151 on February 19, 2018, 01:29:27 PM
#WINNING !(https://uploads.tapatalk-cdn.com/20180219/56761adfe57d73c9c13a84b6a0b7918c.jpg)
Nice price...and 93 to boot, I'm jealous. 91 is my best option.
Is there any other thing besides gas that 9 tenths of a cent is acceptable? It's really $3.01 you're paying...funny.
Quote from: stealbluesho on February 19, 2018, 03:14:05 PM
The shell by my house has terrible 93.... I always get some part throttle KR with it... sheetz has better gas my way.
Shell 93 is pretty consistent near me. 87 is variable. If I go north 20 miles, gas is better regardless of station. No idea why. Safeway 87 up there >> Shell 87 down here lol.
I guess after a bit of research found that the Motorcraft air filter has a 98.5% efficiency standard which is about average for a standard filter.
I believe the Mahle air filter has a 99.5% filtration rate which is not to shabby IMO! Z :)
I have always used Mahle and Hengst on my Bmw and Benz with awesome results.
http://www.mahle-aftermarket.com/na/en/products-and-services/filters/air-filters/index.jsp#airfiltersforpassengercars (http://www.mahle-aftermarket.com/na/en/products-and-services/filters/air-filters/index.jsp#airfiltersforpassengercars)
http://www.mahle.com/en/products-and-services/passenger-cars/cooling/ (http://www.mahle.com/en/products-and-services/passenger-cars/cooling/)
http://www.mahle.com/en/products-and-services/passenger-cars/air-management/turbocharging/charge_air_cooling/index.jsp (http://www.mahle.com/en/products-and-services/passenger-cars/air-management/turbocharging/charge_air_cooling/index.jsp)
MAHLE Drive With The Original 1000HP Mustang Twin Turbo Engine Build At Petty's Garage
! No longer available (http://www.youtube.com/watch?v=F2B-PWklRjY#)
Well they say a dirty filter is more efficient than a clean one ... To a point. I would recommend the Filter Minder, but it hurts the bling factor a little bit, plus where to install on a CAI? LOL. Does save on unnecessary filter changes.
Quote from: SHOdded on February 19, 2018, 06:08:04 PM
Well they say a dirty filter is more efficient than a clean one ... To a point. I would recommend the Filter Minder, but it hurts the bling factor a little bit, plus where to install on a CAI? LOL. Does save on unnecessary filter changes.
Off Topic but curious on how much black soot if any will be alleviated with the stock CAI & better paper Filter! Z
Better flow/oxygenations seems to be the key. MDesign CAI and ethanol both have affected this change, ethanol to a greater degree. possibly due to soot washout, but IDK.
My car is the king of soot... and I have no idea why... personally I don't really care...
It's only bad at start up... and usually only after I flash while the trims get adjusted...
Wish I had a stock airbox to compare...
Sent from my iPhone using Tapatalk
Quote from: stealbluesho on February 19, 2018, 08:40:19 PM
My car is the king of soot... and I have no idea why... personally I don't really care...
It's only bad at start up... and usually only after I flash while the trims get adjusted...
Wish I had a stock airbox to compare...
Sent from my iPhone using Tapatalk
That's the very reason I put the stock intake back to see if there is any notable difference in soot!
I know there is a history of black soot formation even from new ecoboosts sitting @ the dealerships but only to a certain extent!
I think the black soot is contributed to the aftermarket intake IMO due to it not sealed up properly but could be wrong! Z
Quote from: ZSHO on February 19, 2018, 08:58:38 PM
Quote from: stealbluesho on February 19, 2018, 08:40:19 PM
My car is the king of soot... and I have no idea why... personally I don't really care...
It's only bad at start up... and usually only after I flash while the trims get adjusted...
Wish I had a stock airbox to compare...
Sent from my iPhone using Tapatalk
That's the very reason I put the stock intake back to see if there is any notable difference in soot!
I know there is a history of black soot formation even from new ecoboosts sitting @ the dealerships but only to a certain extent!
I think the black soot is contributed to the aftermarket intake IMO but could be wrong! Z
Has there been any noticeable difference? Curious...
I just assumed it was the excess fuel being dumped out the tailpipes during a cold start... maybe the CAI filter is causing it run rich? Not sure when the car switches from open to closed loop..
Sent from my iPhone using Tapatalk
Quote from: stealbluesho on February 19, 2018, 09:00:43 PM
Quote from: ZSHO on February 19, 2018, 08:58:38 PM
Quote from: stealbluesho on February 19, 2018, 08:40:19 PM
My car is the king of soot... and I have no idea why... personally I don't really care...
It's only bad at start up... and usually only after I flash while the trims get adjusted...
Wish I had a stock airbox to compare...
Sent from my iPhone using Tapatalk
That's the very reason I put the stock intake back to see if there is any notable difference in soot!
I know there is a history of black soot formation even from new ecoboosts sitting @ the dealerships but only to a certain extent!
I think the black soot is contributed to the aftermarket intake IMO but could be wrong! Z
Has there been any noticeable difference? Curious...
I just assumed it was the excess fuel being dumped out the tailpipes during a cold start... maybe the CAI filter is causing it run rich? Not sure when the car switches from open to closed loop..
Sent from my iPhone using Tapatalk
Sometimes if the Air intake is partially obstructed it will cause a rich mixture! or the TB! I know some have reported less black soot with the MDesign But so many variables to consider!
It's only been a couple hundred miles with the stock intake but will surely monitor for any changes! Z
Try going completely cat-less.... I can't park within a few feet of the garage or else two black splatters. Like getting inked by two octopuses. 😋
LOL @ "getting inked by two octopuses".
Ha!
Calamari with some fresh garlic and olive oil! Good quicker upper! Lol. Z :D
Couldn't find my 10mm socket... and now... the whole garage is cleaned and tools are organized... found 3 of the 10mm sockets... I know there are more hiding..
Lol
Quote from: stealbluesho on February 20, 2018, 01:38:07 PM
Couldn't find my 10mm socket... and now... the whole garage is cleaned and tools are organized... found 3 of the 10mm sockets... I know there are more hiding..
I am down 3 10mm's myself. One 1/4" deep wall and two regulars. They got lost in my cars. It sucks that you gotta buy whole kits to replace a few. Harbor Freight. Here I come.
The deep well is the one I DIDNT find... I'm so peeved right now..
Sent from my iPhone using Tapatalk
Saw this note on MotorTrend (http://www.motortrend.com/cars/ford/taurus/2010/2010-ford-taurus-sho-test/)
QuoteFor those still harboring some wild-child hormones, the "12S-SHO Performance Package" ($995) buys 20-inch Eagle F1 Supercar summer rubber, performance brake pads (clamping identical discs), 20-percent-stiffer damping, nine-percent-stiffer rear springs, and a bigger rear anti-roll bar plus a shorter final-drive ratio (3.17:1 versus 2.77:1), and performance tuning of the power steering and AdvanceTrac stability control systems.
It's kind of funny as this happened to me a few years ago and now come across this video! Z ???
! No longer available (http://www.youtube.com/watch?v=XagesuDUQ1M#)
I remember when you found and fixed the issue!
Back when my wife and I were dating I had a Jetta. Whilst at the movies there was a down pour outside. After the movie we went to get into the car and there was 2" of standing water on the floor boards... talk about cooling down a hot date!
Sent from my iPhone using Tapatalk
You and the wife should have made some hot steam out of it. Yea baby.
LOL
Quote from: SHOdded on February 21, 2018, 07:26:02 PM
I remember when you found and fixed the issue!
Good memory my friend! Glad to see more Vids representing the ecoboost platform! Z :)
Quote from: bpd1151 on February 21, 2018, 07:33:31 PM
You and the wife should have made some hot steam out of it. Yea baby.
LOL
Lol... we had just come out of the Kevin Costner film "White noise"... when I turned the car on all that came out of the speakers was white noise due to the water shorting the stereo out.... very creepy...
No steam was made THAT night... ;-)
Sent from my iPhone using Tapatalk
Bruce, moved your Mustang-related posts to the Non-EB build section
https://www.ecoboostperformanceforum.com/index.php/topic,8876 (https://www.ecoboostperformanceforum.com/index.php/topic,8876)
Auto start/stop on my 1.5L ecoturd is the most annoying "feature" I have ever experienced... that is all..
Sent from my iPhone using Tapatalk
Quote from: stealbluesho on February 23, 2018, 08:03:21 AM
Auto start/stop on my 1.5L ecoturd is the most annoying "feature" I have ever experienced... that is all..
Sent from my iPhone using Tapatalk
X2 annoying indeed! Must be a way to Deactivate it!! Z
Quote from: ZSHO on February 23, 2018, 08:13:04 AM
Quote from: stealbluesho on February 23, 2018, 08:03:21 AM
Auto start/stop on my 1.5L ecoturd is the most annoying "feature" I have ever experienced... that is all..
Sent from my iPhone using Tapatalk
X2 annoying indeed! Must be a way to Deactivate it!! Z
There are a couple ways....drive in "sport" mode, or press the off button... but it's always on by default... annoying..
Sent from my iPhone using Tapatalk
must be a pid you can change the value of, or maybe even install a "bypass" on the right wire.
I know auto start/stop can be defeated on the F150 with Forscan. Maybe someone has figured it out for the 1.5L?
I might have found a way to defeat disable this annoying auto start stop feature on the Jeep! Z
Hulk ... Smash?
Quote from: stealbluesho on February 23, 2018, 08:20:38 AM
Quote from: ZSHO on February 23, 2018, 08:13:04 AM
Quote from: stealbluesho on February 23, 2018, 08:03:21 AM
Auto start/stop on my 1.5L ecoturd is the most annoying "feature" I have ever experienced... that is all..
Sent from my iPhone using Tapatalk
X2 annoying indeed! Must be a way to Deactivate it!! Z
There are a couple ways....drive in "sport" mode, or press the off button... but it's always on by default... annoying..
Sent from my iPhone using Tapatalk
Sorry for the late reply. Does the start/stop feature activate when the Drivers seat belt is NOT ON ? Z
Quote from: ZSHO on February 23, 2018, 01:43:21 PM
Quote from: stealbluesho on February 23, 2018, 08:20:38 AM
Quote from: ZSHO on February 23, 2018, 08:13:04 AM
Quote from: stealbluesho on February 23, 2018, 08:03:21 AM
Auto start/stop on my 1.5L ecoturd is the most annoying "feature" I have ever experienced... that is all..
Sent from my iPhone using Tapatalk
X2 annoying indeed! Must be a way to Deactivate it!! Z
There are a couple ways....drive in "sport" mode, or press the off button... but it's always on by default... annoying..
Sent from my iPhone using Tapatalk
Sorry for the late reply! Does the start/stop feature activate when the Drivers seat belt is NOT ON ? Z
Lol... yea... who still wears seatbelts?!? It's my company take home car...can't really do anything about it.
Sent from my iPhone using Tapatalk
Ahh okay! I didnt know it was a Co car but in my case I disabled the seat belt reminder to disable the start/stop feature on my Jeep! Z :)
Random thought - With all this instant communication, how come there's such a lack of communication. Notice I didn't end with a question mark.
Quote from: griggs95 on February 23, 2018, 03:30:58 PM
Random thought - With all this instant communication, how come there's such a lack of communication. Notice I didn't end with a question mark.
I usually try to ignore any type of snarky comments but why the sarcasm! Z
It's sometimes hard to distinguish emotions through Text IMO!
Quote from: ZSHO on February 23, 2018, 03:51:56 PM
Quote from: griggs95 on February 23, 2018, 03:30:58 PM
Random thought - With all this instant communication, how come there's such a lack of communication. Notice I didn't end with a question mark.
I usually try to ignore any type of snarky comments but why the sarcasm! Z
LOL...are you playing with me? Your asking a question with an exclamation point is why I ask?
This comment that I made was based only on my current emails and texts with people who don't really read what is said. Happens to so many people I know too instead of phone conversations or in person meetings. Since I had this random thought, I thought this was the place to share it. This could be another great example of what I was talking about lol.
Quote from: griggs95 on February 23, 2018, 04:00:17 PM
Quote from: ZSHO on February 23, 2018, 03:51:56 PM
Quote from: griggs95 on February 23, 2018, 03:30:58 PM
Random thought - With all this instant communication, how come there's such a lack of communication. Notice I didn't end with a question mark.
I usually try to ignore any type of snarky comments but why the sarcasm! Z
LOL...are you playing with me? Your asking a question with an exclamation point is why I ask?
This comment that I made was based only on my current emails and texts with people who don't really read what is said. Happens to so many people I know too instead of phone conversations or in person meetings. Since I had this random thought, I thought this was the place to share it. This could be another great example of what I was talking about lol.
I couldn't agree more. Our communication skills as a whole have taken a deep, deep nosedive in this day and age. As an example, what I really despise lately is when you respond to a Craigslist add via text. You take a a few minutes to type something up that's a few sentences long, ask 3 or 4 questions proof read it and make sure it makes sense and they reply back with the bare minimum and maybe answer one question. What they're trying to do is put all of the burden on you to do all of the communicating so they can just sit back and answer yes or no. I refuse to do it anymore.
The one in need of the information always will have to put out far >>> effort than the responders. Possibly the gap has grown over the years, as attention spans have shortened.
Quote from: SHOdded on February 23, 2018, 04:15:12 PM
The one in need of the information always will have to put out far >>> effort than the responders. Possibly the gap has grown over the years, as attention spans have shortened.
Yes, but in the case I'm talking about they (should) have a vested interest in communicating since they are actually trying to sell something. That's what's so bizarre to me.
Too true!
Quote from: SilvererSHO on February 23, 2018, 04:10:35 PM
Quote from: griggs95 on February 23, 2018, 04:00:17 PM
Quote from: ZSHO on February 23, 2018, 03:51:56 PM
Quote from: griggs95 on February 23, 2018, 03:30:58 PM
Random thought - With all this instant communication, how come there's such a lack of communication. Notice I didn't end with a question mark.
I usually try to ignore any type of snarky comments but why the sarcasm! Z
LOL...are you playing with me? Your asking a question with an exclamation point is why I ask?
This comment that I made was based only on my current emails and texts with people who don't really read what is said. Happens to so many people I know too instead of phone conversations or in person meetings. Since I had this random thought, I thought this was the place to share it. This could be another great example of what I was talking about lol.
I couldn't agree more. Our communication skills as a whole have taken a deep, deep nosedive in this day and age. As an example, what I really despise lately is when you respond to a Craigslist add via text. You take a a few minutes to type something up that's a few sentences long, ask 3 or 4 questions proof read it and make sure it makes sense and they reply back with the bare minimum and maybe answer one question. What they're trying to do is put all of the burden on you to do all of the communicating so they can just sit back and answer yes or no. I refuse to do it anymore.
Funny how 'random thoughts' turn into small discussions lol. I've had the exact same experiences on Craigslist for a few years off and on with various people. Its as if they don't really want to sell the item but I know they do because they post it up...very odd.
Its hard though because I try not to participate with people like that but many times I'm forced too because you either work with that kind of person, or worse yet, are family. Nothing but a headache and wasted energy; and I HATE wasting time!
Emissions Testing Updated September 23, 2017
Many states require that your vehicle undergo either a safety inspection or an emission controls system inspection, or both. If your car or truck has failed inspection, you are probably frustrated. The first thing you need to do is to read up on your state's laws and criteria for failing the test. It varies from state to state, and some of the problems that get flagged may be relatively easy to fix.
Other problems may require in-depth work by an automotive mechanic, but either way, you will need to understand the problems, fix them, and then get the vehicle reinspected and passed if you expect to license it for road use.
Your car may fail an inspection for something as simple as a dangling muffler, for example. Whether your car's OBD (on board diagnostics) system is showing a fault code or if it's your check engine light causing you to fail, you need to know what things need to be remedied and what to expect when you bring the car back for reinspection.
Also, if you are buying a car it is a good idea to first find out whether your state requires safety inspections. Many states have no inspection requirement at all, while others are very strict regarding this.
Following is a list of states and links to contact information pertaining to each state's vehicle emissions testing and safety inspection requirements:
Alabama - No Testing Required
Alaska - Testing No Longer Required
Arizona - for information visit http://www.myazcar.com/ (http://www.myazcar.com/)
Arkansas - for information visit https://www.adeq.state.ar.us/air/planning/ozone/cars.aspx (https://www.adeq.state.ar.us/air/planning/ozone/cars.aspx)
California - for information visit https://www.smogcheck.ca.gov/Consumer/index.html?3 (https://www.smogcheck.ca.gov/Consumer/index.html?3)
Colorado - for information visit www.aircarecolorado.com/ (http://www.aircarecolorado.com/)
Connecticut - for information visit www.ctemissions.com/ (http://www.ctemissions.com/)
Delaware - for information visit www.dmv.de.gov/services/vehicle_services/reg/ve_reg_emissions.shtml (http://www.dmv.de.gov/services/vehicle_services/reg/ve_reg_emissions.shtml)
Florida - Testing No Longer Required
Georgia - for information visit www.cleanairforce.com/ (http://www.cleanairforce.com/)
Hawaii - for information visit www.dmv.org/hi-hawaii/car-registration.php (http://www.dmv.org/hi-hawaii/car-registration.php)
Idaho - Testing Required Only in Ada County - for information visit www.emissiontest.org/ (http://www.emissiontest.org/)
Illinois - for information visit www.epa.state.il.us/air/vim (http://www.epa.state.il.us/air/vim)
Indiana - for information visit www.in.gov/bmv/2665.htm (http://www.in.gov/bmv/2665.htm)
Iowa - No Testing Required
Kansas - No Testing Required
Kentucky - No Testing Required
Louisisana - for information visit www.lsp.org/lse_form4.html (http://www.lsp.org/lse_form4.html)
Maine - for information visit www.maine.gov/dep/air/mobile/enhancedautoinsp.html (http://www.maine.gov/dep/air/mobile/enhancedautoinsp.html)
Maryland - for information visit www.mva.maryland.gov/MVA-Programs/VEIP/veipinfo.htm (http://www.mva.maryland.gov/MVA-Programs/VEIP/veipinfo.htm)
Massachusetts - for information visit for more info visit http://www.mass.gov/rmv/stations (http://www.mass.gov/rmv/stations)
Michigan - No Testing Required
Minnesota - No Testing Required
Mississippi - for information visit https://www.dmv.com/ms/mississippi/emissions-testing (https://www.dmv.com/ms/mississippi/emissions-testing)
Missouri - for more information visit www.dnr.mo.gov/gatewayvip (http://www.dnr.mo.gov/gatewayvip)
Montana - No Testing Required
Nebraska - for more information visit www.dmv.ne.gov/dvr/mvtitles/inspect.html (http://www.dmv.ne.gov/dvr/mvtitles/inspect.html)
Nevada - Some Areas Require Testing - for more information visit www.dmvnv.com/emission_areas.htm (http://www.dmvnv.com/emission_areas.htm)
New Hampshire - for information visit www.nh.gov/safety/divisions/dmv/registration/inspections-emissions/index.htm (http://www.nh.gov/safety/divisions/dmv/registration/inspections-emissions/index.htm)
New Jersey - for information visit www.state.nj.us/mvc/Inspections/ (http://www.state.nj.us/mvc/Inspections/)
New York - for information visit dmv.ny.gov/inspection/inspection-requirements
North Dakota - No Testing Required
Ohio - for information visit epa.ohio.gov/dapc/echeck/testing_info/tips_for_smooth_testing.aspx
Oklahoma - No Testing Required
Oregon - for information visit http://www.dmv.org/or-oregon/smog-check.php (http://www.dmv.org/or-oregon/smog-check.php)
Pennsylvania - for information visit www.drivecleanpa.state.pa.us/ (http://www.drivecleanpa.state.pa.us/)
Rhode Island - for information visit www.dmv.ri.gov/inspections (http://www.dmv.ri.gov/inspections)
South Carolina - No Testing Required
South Dakota - No Testing Required
Tennessee - for more info visit http://www.state.tn.us/environment/apc/vehicle (http://www.state.tn.us/environment/apc/vehicle)
Texas - for information visit www.txdps.state.tx.us/rsd/vi/consumerinfo/emissionTesting.htm (http://www.txdps.state.tx.us/rsd/vi/consumerinfo/emissionTesting.htm)
Utah - for more info visit http://dmv.utah.gov/safety-and-emissions-inspections#emission (http://dmv.utah.gov/safety-and-emissions-inspections#emission)
Vermont - for information visit dmv.vermont.gov/safety/laws/emissions
Virginia - for information visit www.dmv.virginia.gov/webdoc/citizen/vehicles/emissions.asp (http://www.dmv.virginia.gov/webdoc/citizen/vehicles/emissions.asp)
Washington - for information visit www.dol.wa.gov/vehicleregistration/emissions.html (http://www.dol.wa.gov/vehicleregistration/emissions.html)
Washington DC - for information visit https://dmv.dc.gov/service/vehicle-inspections (https://dmv.dc.gov/service/vehicle-inspections)
West Virginia - No Testing Required
Wisconsin - Some Counties Require Testing - for information visit www.dot.wisconsin.gov/drivers/vehicles/im.htm (http://www.dot.wisconsin.gov/drivers/vehicles/im.htm)
Wyoming - No Testing Required
1967 Ford Mustang Eleanor For Sale. Z
Offers.
http://vanguard.dealeraccelerate.net/vehicles/2916/1967-ford-mustang-fastback-eleanor (http://vanguard.dealeraccelerate.net/vehicles/2916/1967-ford-mustang-fastback-eleanor)
http://youtu.be/z11r8CMGce0 (http://youtu.be/z11r8CMGce0)
Airaid CAI Dryflow MXP Series Cold Air Box System with Black Intake Tube with Free Fed ex shipping for $280.79
SynthaFlow (Oiled Filter) (Red) is $273.37
HURRY: Expires on 2/28/2018
http://www.autoanything.com/air-intakes/airaid-intake-system (http://www.autoanything.com/air-intakes/airaid-intake-system)
New video from (FTM) on 2003-2017 Ford Expedition Clunk Going Into Gear: Rear Differential Support Bracket Replacement. Z
! No longer available (http://www.youtube.com/watch?v=DelqMr6Mmaw#)
Just spotted this now the mock vehicle looks more like a fusion but anyone willing to try this out for me?
https://m.ebay.com/itm/12-1-Android-6-0-Car-GPS-Navigation-Radio-Stereo-Wifi-For-Ford-Taurus-2015-2018/122939114561?hash=item1c9fbe0441:g:H6UAAOSw9Z1abpfQ
Sent from my Pixel 2 XL using Tapatalk
It's certainly not the most inviting news but the Mrs was relieved from the job after 16 years and certainly puts a burden on things and then some.
I guess when life gives you lemons, make lemonade. Z
That sucks Z.
Part of the reason why I got out of the private sector so many years ago. Nearly 24 ago to be exact.
I saw 1st hand corporations all across the country letting senior employees go, most often with very little, if any, severance package. Just so disrespectful.
A person dedicates so much of their life to their employer, then w/o any notice..... BAM. Gone. Bye. Don't let the door hit you in the @$$ on the way out. Or even worse, they have you escorted off the property.
Makes me so mad. I've seen it more often than I ever care to acknowledge.
Good luck moving forward.
So sorry to hear, Z! Heartbreaking news, indeed!
Thanks Manu and bpd1151.. It's certainly nice to have supportive members on board which lessens the tension a bit,but learned the hard way to be prepared to have a little nest egg to fall on...
It's quite upsetting and puts a damper on things but in the meantime will try to keep my chin up and hope for the best. Z
New Video from (FTM) on The Ultimate 5.4L 3v Triton Engine UPGRADE: New Melling M340HV M360HV High Volume Oil Pumps! Z
Links to the Pumps Mentioned in the Video:
High Volume M340HV Pump (60 psi)-
http://amzn.to/2FjRTLi (http://amzn.to/2FjRTLi)
Original M340 Pump (60 psi)-
http://amzn.to/2tbFLay (http://amzn.to/2tbFLay)
Original M360 Oil Pump (80 psi)-
http://amzn.to/2FMrV0J (http://amzn.to/2FMrV0J)
! No longer available (http://www.youtube.com/watch?v=WLFzB0e3GZw#)
! No longer available (http://www.youtube.com/watch?v=ulEJfcQ7HhA#)
Sorry to here about your wife Z. Yeah totally sucks, and know how you feel.
Quote from: bamsho on March 02, 2018, 07:52:16 PM
Sorry to here about your wife Z. Yeah totally sucks, and know how you feel.
Thanks Brian..I try to take the bad with the good. Z
bah, that has been going around. There closing my site as well for my career ... they claim i'm safe but that is until they can train up some other kid in another state and gift me a permanent vacation..
But the economy is on an upswing, right? SMH.
New From (FTM) on 2002-2010 Ford Explorer: Rear Brake Pads and Rotors Replacement. Z
http://youtu.be/86OfUsLXzyM (http://youtu.be/86OfUsLXzyM)
Top 15 best sleepers article... guess which took home second place?
http://motor-junkie.com/15-sleepers-will-surprise-performance/4277 (http://motor-junkie.com/15-sleepers-will-surprise-performance/4277)
I would say Li'l Red Flyer wagon, without looking, LOL.
Also happened today.. old neighbor was bragging about his 2016 Challenger Scat Pack with a shaker hood... and I quote "You need to see what 485hp under a shaker hood feels like, the experience is nothing short of amazing!"....
I responded "You should see what 550hp feels like while getting your butt massaged at the same time..."
He felt really silly when we lined up afterwards a light and he was left scratching his head... at least his car is shiny...
Quote from: stealbluesho on March 10, 2018, 08:40:10 PM
Also happened today.. old neighbor was bragging about his 2016 Challenger Scat Pack with a shaker hood... and I quote "You need to see what 485hp under a shaker hood feels like, the experience is nothing short of amazing!"....
I responded "You should see what 550hp feels like while getting your butt massaged at the same time..."
He felt really silly when we lined up afterwards a light and he was left scratching his head... at least his car is shiny...
Hahahah Booooom!!!
Quote from: ZSHO on March 02, 2018, 01:30:16 PM
It's certainly not the most inviting news but the Mrs was relieved from the job after 16 years and certainly puts a burden on things and then some.
I guess when life gives you lemons, make lemonade. Z
Keep your head up and keep pushing!! Every thing all ways turns out!
8) (https://i.imgur.com/PJnWFkFh.jpg) .Z 8)
Quote from: ZSHO on March 14, 2018, 08:58:57 PM
8) (https://i.imgur.com/PJnWFkFh.jpg) .Z 8)
My, what large forced induction parts you have.
The better to smoke you with my dear!
Quote from: stealbluesho on March 10, 2018, 08:01:58 PM
Top 15 best sleepers article... guess which took home second place?
http://motor-junkie.com/15-sleepers-will-surprise-performance/4277 (http://motor-junkie.com/15-sleepers-will-surprise-performance/4277)
Love that article. Especially one's that chronicle the history of the platform, and infuse it with today's SHO.
One mistake on the author's part, was listing it as 355hp. Oh well. Great explanation nonetheless.
New Vid from (FTM) on Ford Front Differential Maintenance: Specialized Drain and Fill Procedure. Z
! No longer available (http://www.youtube.com/watch?v=f0MhOijZS7o&t=2s#)
Local dealer callerd me.. 2015 PP fully loaded for 21.5K.... 70K Miles.... feeling like that's a bit much.. my 2010 has 60K....
Quote from: stealbluesho on March 18, 2018, 12:00:58 AM
Local dealer callerd me.. 2015 PP fully loaded for 21.5K.... 70K Miles.... feeling like that's a bit much.. my 2010 has 60K....
Too much....
I could have bought out my 15 with 31500 for 23500
Got my 13 for 18k @ 47k miles.
got my 11' for 21k with 12k on the clock in 2016
Sent from my iPhone using Tapatalk
New Video from (FTM) on Ford F-150 3.5L Ecoboost Engine Startup Rattle FIX: Timing Set TSB 16-0027 Full Walkthrough Pt. 1 . Z
! No longer available (http://www.youtube.com/watch?v=Va6sVtzRZAo&t=33s#)
Mother nature @ it's best. Z
(https://i.imgur.com/sienypQh.jpg)(https://i.imgur.com/4bef5Y1h.jpg)
Hopefully the last Hurrah before spring kicks in :)
New Part 2 of Ford F-150 3.5L Ecoboost Startup Rattle FIX: Timing Set TSB 16-0027 Full Walkthrough Pt. 2 of 4. Z
! No longer available (http://www.youtube.com/watch?v=k4bUkK9eqKk#)
Ford F-150 3.5L Ecoboost Startup Rattle FIX: Timing Set TSB 16-0027 Full Walkthrough Pt. 3 of 4. Z
! No longer available (http://www.youtube.com/watch?v=3Mvo5yiJzvM&t=3s#)
The wife surprised me today when she said she was thinking about trading her Wrangler in for a new SHO. Local dealer has a non-PP black one for what seems like a great deal. After all incentives it would be about 37,300 before trade. Only problem about her getting one is I might want to get one also after I get to see all the nice creature comforts I've been missing out on with the PI since I've never been in a real SHO haha.
The race is officially on :D
Quote from: 5ohSHO on March 27, 2018, 11:47:12 PM
The wife surprised me today when she said she was thinking about trading her Wrangler in for a new SHO. Local dealer has a non-PP black one for what seems like a great deal. After all incentives it would be about 37,300 before trade. Only problem about her getting one is I might want to get one also after I get to see all the nice creature comforts I've been missing out on with the PI since I've never been in a real SHO haha.
The real question is...... is she gonna want it tuned lol!
I think she wouldn't mind getting it tuned once the warranty is almost up.
Well...... she got it. Don't have any picks yet, but I'm super surprised at how nice a real SHO is.
Quote from: 5ohSHO on March 29, 2018, 02:00:41 AM
Well...... she got it. Don't have any picks yet, but I'm super surprised at how nice a real SHO is.
AS I Drive the PI in Winter and On Business Trips: Like Bringing an AXE to a knife Fight
AND the SHO During the Summer and Drag Strips: Like Bringing A Scalpel to the Same...
However You Get WAY more Respect Driving The PI: "Get out of my way you Slowpoke"
Just a shout out to @BPD1151 for always being willing to answer questions! Its appreciated!
Enjoy. Z ;)
! No longer available (http://www.youtube.com/watch?v=RDn7kX-G510#)
Quote from: sholxgt on November 29, 2017, 05:42:00 PM
Good sale...
http://www.shelbystore.com/product-p/venicesb95set.htm (http://www.shelbystore.com/product-p/venicesb95set.htm)
What's the chances a 9.5" wheel with 275/40 could fit in the front?
Looking at this...
http://www.willtheyfit.com/index.php?width=245&aspect=45&diameter=20&wheelwidth=8&offset=39&width2=275&aspect2=40&wheel_size=20&wheel_width=9-5&offset2=40 (http://www.willtheyfit.com/index.php?width=245&aspect=45&diameter=20&wheelwidth=8&offset=39&width2=275&aspect2=40&wheel_size=20&wheel_width=9-5&offset2=40)
makes me think there's a chance. The extra width is fairly split between inside and out.
Did you ever go forward with this? Thanks for the link as well. I had not seen that before..
Here are some PICS @ today's NY Car SHO. Z :ford:
(https://i.imgur.com/BVY6MZYh.jpg)
(https://i.imgur.com/ta2CC2th.jpg)
(https://i.imgur.com/aAiDwYRh.jpg)
(https://i.imgur.com/Rw5jcQBh.jpg)
(https://i.imgur.com/9qTg0fVh.jpg)
(https://i.imgur.com/DcZstqJh.jpg)
(https://i.imgur.com/fIzDRblh.jpg)
(https://i.imgur.com/M4LCHVGh.jpg)
(https://i.imgur.com/M4LCHVGh.jpg?1)
(https://i.imgur.com/qfqcPHEh.jpg)
(https://i.imgur.com/Y1iNbw9h.jpg)
(https://i.imgur.com/6DN6GAEh.jpg)
(https://i.imgur.com/iQEX53Uh.jpg)
(https://i.imgur.com/ImPEOxyh.jpg)
(https://i.imgur.com/eOMMmOuh.jpg)
(https://i.imgur.com/aeVZ6Zmh.jpg)
(https://i.imgur.com/yW6QLHZh.jpg)
(https://i.imgur.com/k5hn0CHh.jpg)
I spotted a PI IN RED. Z
(https://i.imgur.com/sm6Ovzdh.jpg)
New from (FTM) on Ford F-150 3.5L Ecoboost Timing Set Replacement Part 4 : Reassembling the Engine. Z
! No longer available (http://www.youtube.com/watch?v=dzb0PMI5v78#)
Taking the kids to the movies and we are cruising at 60Mph... the guy in front me locks up his brakes hard for no reason... quick judgement call was that I wasn't going to be able to stop in time without plowing into him... had to jump into the right lane which had a car in it... punched it and twitched over the right lane hoping to God the guy in that lane would hit his brakes...
Ended up clipping his front fender.. pulled over into the shoulder... it was just some paint transfer on my car by the rear tire well and he had a small golf ball sized dent.. he either didn't have insurance or didn't want to deal with it... so he told me just to have a good day and was surprised it wasn't was a worse accident... my daughter slept through it and my son just looked up asked why we were stopping...
Keep safe out there.. never know when stupid crap might happen...
real scary to think of what might have happened. glad you were able to make it out with "minor" scrapes. and a good lesson to always be on the alert.
X2 -Glad no one was injured while keeping your composure @ a minimum. Z
Well we are moved out of our current house. Ironically we are staying across the street from it. Closing is tomorrow morning at 8am. We probably won't be moving into the new house until late April. We are glad this part is over and cant wait to move into the new house.
Let me tell you what, if you want to lose weight, try selling a house. OMG what a stressful ordeal. UGH!!!
Quote from: bamsho on April 08, 2018, 03:01:40 PM
Well we are moved out of our current house. Ironically we are staying across the street from it. Closing is tomorrow morning at 8am. We probably won't be moving into the new house until late April. We are glad this part is over and cant wait to move into the new house.
Let me tell you what, if you want to lose weight, try selling a house. OMG what a stressful ordeal. UGH!!!
Now you tell me about losing weight!!! I could have avoided surgery!!! LMAO
Brian keeps all his tips and tricks in a secretive little pouch just under the left eyebrow.
Quote from: bamsho on April 08, 2018, 03:01:40 PM
Well we are moved out of our current house. Ironically we are staying across the street from it. Closing is tomorrow morning at 8am. We probably won't be moving into the new house until late April. We are glad this part is over and cant wait to move into the new house.
Let me tell you what, if you want to lose weight, try selling a house. OMG what a stressful ordeal. UGH!!!
good luck! we just got through with our move. closed on the old house on march 2nd and had 3 weeks 'homeless' until we closed on the new house. no doubt it's very stressful. I'm not doing it again for at least 25 years when I retire.
Central Ohio....When the Holy Hell is the weather going to change,
I am getting a head Cold, and Looking out side I see snow flakes....!
Quote from: SHOdded on April 08, 2018, 07:47:40 PM
Brian keeps all his tips and tricks in a secretive little pouch just under the left eyebrow.
You mean Brian, our resident (now homeless) bum? This guy right here? Be sure to zoom in on that there eyebrow of his.
Gotta give the man props though for his ingenuity in raising funds. LOL. Love 'ya Brian!(https://uploads.tapatalk-cdn.com/20180409/857c1538b64bfc8bf704a2f4badd942b.jpg)
Yep offically a homeless bum now.
I hung with Brian last weekend at our local coffee & cars...pretty sure I caught him practicing his homeless look a couple of times....
Good thing the SHO is roomy with a big trunk...
Quote from: stealbluesho on April 10, 2018, 08:42:53 AM
Good thing the SHO is roomy with a big trunk...
Ha! Brian gets the trunk. His wife everything else.
I wonder under what permissions and/or guidelines does she allow him to escape the trunk?
Quote from: bpd1151 on April 10, 2018, 09:49:29 AM
Quote from: stealbluesho on April 10, 2018, 08:42:53 AM
Good thing the SHO is roomy with a big trunk...
Ha! Brian gets the trunk. His wife everything else.
I wonder under what permissions and/or guidelines does she allow him to escape the trunk?
The 60/40 fold down rear seats could be useful.... providing an unauthorized escape route..
Sshhhhh don't tell Brian that.
Allow his wife the courtesy of knowing that Brian is most definitely her b!tch. LOL.
Just for @BPD1151
@- Brian(BamSho) Best of luck with the new Crib and on a serious note Brian and Kris are Truly good people and looking forward to meeting up once again. Z :)
Quote from: BJSHO on April 11, 2018, 05:43:09 PM
Just for @BPD1151
That is OUTSTANDING! Thanks for the laugh.
@Z...... I completely agree with you.
The community is fortunate to have such great people around as Brian and Kris and I am truly thankful for their friendship.
I spotted this really Nice PI-Utility early this morning. Z ;)
(https://i.imgur.com/qJInHkvh.jpg)(https://i.imgur.com/Rn0jvxeh.jpg)
Shhhhhhh, don't let it out I may be nice. Everyone I work with thinks I'm a real a**hole.
Why get an SHO? Cause of the trunk space of course!!!!
(https://uploads.tapatalk-cdn.com/20180412/1e219ca3770e7daedf0062aba01ba47a.jpg)
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 12, 2018, 04:49:33 PM
Why get an SHO? Cause of the trunk space of course!!!!
(https://uploads.tapatalk-cdn.com/20180412/1e219ca3770e7daedf0062aba01ba47a.jpg)
Sent from my iPhone using Tapatalk
I couldn't agree with you more.... !!!!(https://uploads.tapatalk-cdn.com/20180412/8571dccd5ba8e6f5bdc674835528b045.jpg)
Quote from: bpd1151 on April 12, 2018, 04:54:33 PM
Quote from: BJSHO on April 12, 2018, 04:49:33 PM
Why get an SHO? Cause of the trunk space of course!!!!
(https://uploads.tapatalk-cdn.com/20180412/1e219ca3770e7daedf0062aba01ba47a.jpg)
Sent from my iPhone using Tapatalk
I couldn't agree with you more.... !!!!(https://uploads.tapatalk-cdn.com/20180412/8571dccd5ba8e6f5bdc674835528b045.jpg)
I think the gear in both trunks bring the skirts over! Although yours gets them "vibrating" before they get close!
Sent from my iPhone using Tapatalk
Vibrating right off!!!!
Quote from: BJSHO on April 12, 2018, 04:49:33 PM
Why get an SHO? Cause of the trunk space of course!!!!
(https://uploads.tapatalk-cdn.com/20180412/1e219ca3770e7daedf0062aba01ba47a.jpg)
Sent from my iPhone using Tapatalk
My son does that with a Veloster. Hockey that is.
APR 12, 2018 | FORD PERFORMANCE STAFF
SPORT MODE ENHANCES EDGE ST EXPERIENCE . Z
DEARBORN - The all-new Ford Edge ST is ready to impress buyers when it makes its debut on the market. Ford Performance fans can look forward to checking out some of the great features on the Edge ST, which include:
2.7-liter twin-turbocharged EcoBoost engine with 335 horsepower and 380 lb.-ft. of torque
Quick-shifting 8-speed automatic transmission with SelectShift manual paddle shifters
Standard AWD
Standard with CoPilot 360
20" wheels standard, 21" wheels optional with summer performance tires (when you option Performance Pack)
Brakes: Front Twin 48 mm steel piston calipers with 345x32 mm damped iron rotors. Rear Single 38 mm steel piston calipers with 345x19 mm rotors
When you option Performance Pack, the calipers are painted red, front rotors remain the same size but are new and optimized for performance and cooling, new dust shield added to the front to further optimize for cooling, and performance pads are added front and rear to provide a consistent and prolonged track experience
New Electronic Stability/Traction Control Modes (more info to come.
http://performance.ford.com/enthusiasts/media-room/20180/03/edge-st-sport-mode.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/media-room/20180/03/edge-st-sport-mode.html?cks=432128850&emailid=FP_FASTNEWS)
335hp out of the little 2.7 that could.
Impressive!
Single piston rear brake caliper though..... still !?!?
C'mon Ford. Tsk tsk tsk.
changed my oil the other day and noticed oil all over the bottom of the transmission and saw 1 fresh drip of it on the garage floor. There are no other drops of oil as I just moved into this house a few weeks ago so it must have just started. I took a paper towel to it and it is brown so it's not transmission fluid, it also isn't thick like gear oil and the PTU looks dry. It seems to be coming from the engine side. could the rear main seal be leaking? i just hit 56k miles. PCV system acting up pressurizing the crankcase? anywhere else i should check if that's the case?
Lunch if i still had my 2010.....(https://uploads.tapatalk-cdn.com/20180413/4aa75da4410da191de7b3ededcf1a1f8.jpg)
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 13, 2018, 12:47:18 PM
Lunch if i still had my 2010.....(https://uploads.tapatalk-cdn.com/20180413/4aa75da4410da191de7b3ededcf1a1f8.jpg)
Sent from my iPhone using Tapatalk
Aren't those fun to snack on....Personally I start to see red and I get a bit aggressive when I see the word "hemi" on the roads...They generally are sore losers so I enjoy it that much more.
Quote from: AJP turbo on April 13, 2018, 12:49:54 PM
Quote from: BJSHO on April 13, 2018, 12:47:18 PM
Lunch if i still had my 2010.....(https://uploads.tapatalk-cdn.com/20180413/4aa75da4410da191de7b3ededcf1a1f8.jpg)
Sent from my iPhone using Tapatalk
Aren't those fun to snack on....Personally I start to see red and I get a bit aggressive when I see the word "hemi" on the roads...They generally are sore losers so I enjoy it that much more.
This guy runs around town a lot... always driving like an ***hole... never had an opportunity to make him feel bad... soon though....
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 12, 2018, 04:49:33 PM
Why get an SHO? Cause of the trunk space of course!!!!
(https://uploads.tapatalk-cdn.com/20180412/1e219ca3770e7daedf0062aba01ba47a.jpg)
Sent from my iPhone using Tapatalk
HAH.
I just realized this was you and I dig the new nickname...
Quote from: 92BlackGT on April 13, 2018, 07:23:36 AM
changed my oil the other day and noticed oil all over the bottom of the transmission and saw 1 fresh drip of it on the garage floor. There are no other drops of oil as I just moved into this house a few weeks ago so it must have just started. I took a paper towel to it and it is brown so it's not transmission fluid, it also isn't thick like gear oil and the PTU looks dry. It seems to be coming from the engine side. could the rear main seal be leaking? i just hit 56k miles. PCV system acting up pressurizing the crankcase? anywhere else i should check if that's the case?
Thats not good. Usually the Trans oil seal needs to be redone. See people complaining of that here and on Facebook.
Summer-blend fuel is around the corner. Z
https://www.eia.gov/outlooks/steo/report/summerfuels.php (https://www.eia.gov/outlooks/steo/report/summerfuels.php)
Quote from: ZSHO on April 14, 2018, 07:05:22 AM
Summer-blend fuel is around the corner. Z
https://www.eia.gov/outlooks/steo/report/summerfuels.php (https://www.eia.gov/outlooks/steo/report/summerfuels.php)
Interesting article Z.
Thanks for posting.
Soooo a week without a suspension, meth, exhaust, or a tune on this is getting old... I feel so lethargic....and disconnected from the road... ugh...
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 14, 2018, 03:53:22 PM
Soooo a week without a suspension, meth, exhaust, or a tune on this is getting old... I feel so lethargic....and disconnected from the road... ugh...
Sent from my iPhone using Tapatalk
LMAO!
I knew it wouldn't last...
Of course having a new car with a payment and warranty makes the issue a bit more dicey which is why I chose the path I did with the 15.
Quote from: FoMoCoSHO on April 14, 2018, 04:18:30 PM
Quote from: BJSHO on April 14, 2018, 03:53:22 PM
Soooo a week without a suspension, meth, exhaust, or a tune on this is getting old... I feel so lethargic....and disconnected from the road... ugh...
Sent from my iPhone using Tapatalk
LMAO!
I knew it wouldn't last...
Of course having a new car with a payment and warranty makes the issue a bit more dicey which is why I chose the path I did with the 15.
I do have a new 3BAR, Tstat, and an updated LMS tune on the way.... I dropped a K&N filter in it yesterday.... and got two new kegs for the kegerator so I have some thinking juice...
I can get away with above and maintain warranty... as there would be no reason for them to suspect anything different...
The rest however is a bit obvious.... but if I do decide to go for broke, I'm gonna bypass the meth I think and see what I can do with the bigger HPFP and Ethanol... might need to make a trip to LMS...
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 14, 2018, 04:54:45 PM
Quote from: FoMoCoSHO on April 14, 2018, 04:18:30 PM
Quote from: BJSHO on April 14, 2018, 03:53:22 PM
Soooo a week without a suspension, meth, exhaust, or a tune on this is getting old... I feel so lethargic....and disconnected from the road... ugh...
Sent from my iPhone using Tapatalk
LMAO!
I knew it wouldn't last...
Of course having a new car with a payment and warranty makes the issue a bit more dicey which is why I chose the path I did with the 15.
I do have a new 3BAR, Tstat, and an updated LMS tune on the way.... I dropped a K&N filter in it yesterday.... and got two new kegs for the kegerator so I have some thinking juice...
I can get away with above and maintain warranty... as there would be no reason for them to suspect anything different...
The rest however is a bit obvious.... but if I do decide to go for broke, I'm gonna bypass the meth I think and see what I can do with the bigger HPFP and Ethanol... might need to make a trip to LMS...
Sent from my iPhone using Tapatalk
Are you gonna swap the pump every time you go in for service?
It is my understanding it won't run on the OEM calibration.
Quote from: FoMoCoSHO on April 14, 2018, 05:05:43 PM
Quote from: BJSHO on April 14, 2018, 04:54:45 PM
Quote from: FoMoCoSHO on April 14, 2018, 04:18:30 PM
Quote from: BJSHO on April 14, 2018, 03:53:22 PM
Soooo a week without a suspension, meth, exhaust, or a tune on this is getting old... I feel so lethargic....and disconnected from the road... ugh...
Sent from my iPhone using Tapatalk
LMAO!
I knew it wouldn't last...
Of course having a new car with a payment and warranty makes the issue a bit more dicey which is why I chose the path I did with the 15.
I do have a new 3BAR, Tstat, and an updated LMS tune on the way.... I dropped a K&N filter in it yesterday.... and got two new kegs for the kegerator so I have some thinking juice...
I can get away with above and maintain warranty... as there would be no reason for them to suspect anything different...
The rest however is a bit obvious.... but if I do decide to go for broke, I'm gonna bypass the meth I think and see what I can do with the bigger HPFP and Ethanol... might need to make a trip to LMS...
Sent from my iPhone using Tapatalk
Are you gonna swap the pump every time you go in for service?
It is my understanding it won't run on the OEM calibration.
"Go for broke" meaning not caring about the warranty... BUT the HPFP is a 10 minute swap. I've swapped them out before.
And no, it will not run with the OEM calibration.
Sent from my iPhone using Tapatalk
Honestly... CAI such as the AIRAID doesn't help until you are around 14 or higher PSI, and from what I understand, the exhaust setups don't really add any extra power...
The the big power adders are Tune w/ 3BAR, Downpipes, and Meth or heavy E tune...
In reality our drive train can only handle 475 torque, even then you need to use some of the factory torque control parameters... anything more than that you are looking at a short lived setup...
So if I can get my rig to around 425HP/475 or close then I will happy...
Unfortunately a tune, drop in filter, and 3BAR won't get me there... but it should at least help the car feel less anemic.
Sent from my iPhone using Tapatalk
A tune only won't get that power but it will make 475 wtq on a dynojet I'd feel safe saying...maybe not all cars or fuel but it's possible...I think your initial 93 tunes were pretty stout
My two track files have 506 awtq on the lower file, and the higher track file is 608 awtq.
So they're both torque monsters respectively.
I've been running my LOWER track file now for the better part of 2yrs consistently (both track, street, etc.) all w/o any issue whatsoever.
Actually, I've beaten the living snot out of the lower track file, and my trans is still running smooth. Clipped past 78k recently on the odometer.
My LMS file(s) have, and continue to, serve me incredibly well.
Couldn't have asked for anything better quite honestly.
Quote from: bpd1151 on April 14, 2018, 07:19:03 PM
My two track files have 506 awtq on the lower file, and the higher track file is 608 awtq.
So they're both torque monsters respectively.
I've been running my LOWER track file now for the better part of 2yrs consistently (both track, street, etc.) all w/o any issue whatsoever.
Actually, I've beaten the living snot out of the lower track file, and my trans is still running smooth. Clipped past 78k recently on the odometer.
My LMS file(s) have, and continue to, serve me incredibly well.
Couldn't have asked for anything better quite honestly.
There are a couple things at play here that I didn't go into on my post. I would need to double check your dynos but I am guessing the torque comes in a bit later due to the bigger turbos? With the stockers I would image the torque comes in earlier which is harder on the drive train getting off line via brake boosting...
In any event... LMS told me you baby that thing anyhow.... but probably more importantly you follow a very tight maintenance schedule.. and when is the last time it saw a track?
Sent from my iPhone using Tapatalk
I've been doing more auto-crossing/road coursing than dragging. Usually go to Blackhawk Farms up North of me near the WI. state line, and then also the Autobahn in Joliet which is a mere 15min from me.
Usually go there at least twice per year, at each facility.
Especially since having employed the Megan's and the implementation of the oversized big brake upgrades from Wilwood's at all 4 corners.
And those telling you I baby it, are the front counter sales clerks who egg me to push it more just so I can buy more parts from them.
Hahaha flip'n goofs. The drag stripping has bored me. Only so much fun going in a straight line for 11 seconds, only to wait in the staging lanes for what seems like ever, just to enjoy another 11 seconds. Meh. Yawn.
I'll have to dig around for my dyno sheet and repost it. I have posted it somewhere here previously, although it's been a while. But I don't mind looking for it, to post it again.
AJP's right though, a tune only is likely NOT to yield torque #'s in the upper 400's.
I have to find my old dyno too, pre-motor and turbo upgrades, to see what the torque #'s were then. I recall it was 435awhp, and I think the torque was in the low 400's then. I just have to re-check.
Quote from: bpd1151 on April 14, 2018, 07:38:47 PM
I've been doing more auto-crossing/road coursing than dragging. Usually go to Blackhawk Farms up North of me near the WI. state line, and then also the Autobahn in Joliet which is a mere 15min from me.
Usually go there at least twice per year, at each facility.
Especially since having employed the Megan's and the implementation of the oversized big brake upgrades from Wilwood's at all 4 corners.
And those telling you I baby it, are the front counter sales clerks who egg me to push it more just so I can buy more parts from them.
Hahaha flip'n goofs. The drag stripping has bored me. Only so much fun going in a straight line for 11 seconds, only to wait in the staging lanes for what seems like ever, just to enjoy another 11 seconds. Meh. Yawn.
I'll have to dig around for my dyno sheet and repost it. I have posted it somewhere here previously, although it's been a while. But I don't mind looking for it, to post it again.
AJP's right though, a tune only is likely NOT to yield torque #'s in the upper 400's.
I have to find my old dyno too, pre-motor and turbo upgrades, to see what the torque #'s were then. I recall it was 435awhp, and I think the torque was in the low 400's then. I just have to re-check.
Would love to see some videos and/or pictures of you slinging that 4400lb car around the track!
In any event, I know I won't get there with a tune, 3BAR, Tstat setup. Not claiming I will... mostly saying to get to where I want to go is going to require voiding my warranty as FoMoCSHO aptly stated...
Not sure I want to do that with only 7K on the odometer... as far as I am concerned that is still breaking in....
You don't need to go find that dyno... I think it's on dragtimes, Facebook, tinder, EBPF, SHOforums, instagram, and livernoise website.
Sent from my iPhone using Tapatalk
Geezuz..... I don't even do half of those social sites. LOL. That's funny.
I began voiding my warranty at a crisp 301 miles on the odometer.
I remember it cuz I was thinking to myself "here we go again". Much like the conundrum you are on the verge of with this newest model year SHO in your stable.
Void it. Have fun. Don't look back. Do it in stages like you are, and you'll be fine. Incremental steps there BJ.
Quote from: bpd1151 on April 14, 2018, 07:53:44 PM
Geezuz..... I don't even do half of those social sites. LOL. That's funny.
I began voiding my warranty at a crisp 301 miles on the odometer.
I remember it cuz I was thinking to myself "here we go again". Much like the conundrum you are on the verge of with this newest model year SHO in your stable.
Void it. Have fun. Don't look back. Do it in stages like you are, and you'll be fine. Incremental steps there BJ.
Oh don't lie!!!!! Tinder rings a bell or two!!
I hate stages... it's like teasing for more... and just frustrates me.
My 2010 came with the Borla and Airaid already in it... the borla was nice the but the drone was awful.. I won't go with it again(if you can still find it)... Corsa has a decent reputation...
For me it's wanting to get it right this time... and I don't want to dick around with tuners as I am hoping this car is more tuneable than my last one...
Too many options and decisions.. but I do know stock is about as fun as a wet fart in church..
Sent from my iPhone using Tapatalk
I can honestly say my 2013 is faster than my old 2012. I had all modded parts transferred off the 2012 to the 2013 and after my tune files came. Right off the bat it was faster with the same parts.
Quote from: BJSHO on April 14, 2018, 08:01:28 PM
Quote from: bpd1151 on April 14, 2018, 07:53:44 PM
Geezuz..... I don't even do half of those social sites. LOL. That's funny.
I began voiding my warranty at a crisp 301 miles on the odometer.
I remember it cuz I was thinking to myself "here we go again". Much like the conundrum you are on the verge of with this newest model year SHO in your stable.
Void it. Have fun. Don't look back. Do it in stages like you are, and you'll be fine. Incremental steps there BJ.
Oh don't lie!!!!! Tinder rings a bell or two!!
I hate stages... it's like teasing for more... and just frustrates me.
My 2010 came with the Borla and Airaid already in it... the borla was nice the but the drone was awful.. I won't go with it again(if you can still find it)... Corsa has a decent reputation...
For me it's wanting to get it right this time... and I don't want to dick around with tuners as I am hoping this car is more tuneable than my last one...
Too many options and decisions.. but I do know stock is about as fun as a wet fart in church..
Sent from my iPhone using Tapatalk
Don't mess with tuners, just find yourself a used SCT and get Brad to tune you and move on. You ran the Tuner gammut with that unicorn and no PP that you traded in.
You should now have a solid strategy in the new one and you have PP to get the nannies out of your way. Let Brad do his magic knowing this time you do not have to worry about those off the line traction issues. Well your tires will have to worry, but you will not be fighting TC as well....
I would not think suspension work should affect your drivetrain warranty, so maybe do the coil overs again to get your ride back, then the basic mods for engine you already have on the way+SCT?
As for Exh.. I went PPE catted wish I had known what I know now and that WA does not emissions check anything this new. That might be more than you want to make easy return to stock for dealer trips. though..? I also went with the axle back muffler, I think Dynomax. It has a nice tone to it.
Quote from: lamrith on April 15, 2018, 02:52:45 PM
Quote from: BJSHO on April 14, 2018, 08:01:28 PM
Quote from: bpd1151 on April 14, 2018, 07:53:44 PM
Geezuz..... I don't even do half of those social sites. LOL. That's funny.
I began voiding my warranty at a crisp 301 miles on the odometer.
I remember it cuz I was thinking to myself "here we go again". Much like the conundrum you are on the verge of with this newest model year SHO in your stable.
Void it. Have fun. Don't look back. Do it in stages like you are, and you'll be fine. Incremental steps there BJ.
Oh don't lie!!!!! Tinder rings a bell or two!!
I hate stages... it's like teasing for more... and just frustrates me.
My 2010 came with the Borla and Airaid already in it... the borla was nice the but the drone was awful.. I won't go with it again(if you can still find it)... Corsa has a decent reputation...
For me it's wanting to get it right this time... and I don't want to dick around with tuners as I am hoping this car is more tuneable than my last one...
Too many options and decisions.. but I do know stock is about as fun as a wet fart in church..
Sent from my iPhone using Tapatalk
Don't mess with tuners, just find yourself a used SCT and get Brad to tune you and move on. You ran the Tuner gammut with that unicorn and no PP that you traded in.
You should now have a solid strategy in the new one and you have PP to get the nannies out of your way. Let Brad do his magic knowing this time you do not have to worry about those off the line traction issues. Well your tires will have to worry, but you will not be fighting TC as well....
I would not think suspension work should affect your drivetrain warranty, so maybe do the coil overs again to get your ride back, then the basic mods for engine you already have on the way+SCT?
As for Exh.. I went PPE catted wish I had known what I know now and that WA does not emissions check anything this new. That might be more than you want to make easy return to stock for dealer trips. though..? I also went with the axle back muffler, I think Dynomax. It has a nice tone to it.
I like the stock exhaust for the time being... the borla had drone that was god awful under partial load at 2-3K rpms... call it getting old, but I am enjoying the quieter cabin. And from the dyno testing done, the stock cat back isn't restricted to the point that spending $1K on exhaust is worth the money..
I did like the coilovers, but if I do it again, I will be going with BC racing coilovers as the quality is better.
Additionally, I think I will be sticking with the LMS tunes for the time being. Nothing against Brad, but I am burnt on datalogging. Unless something changes, I am not looking to get this car ragged out right away.
New Vid From *(FTM) on 2008-2012 Ford Escape Power Steering Code B2278 : EPAS Torque Sensor Critical Installation Steps . Z
! No longer available (http://www.youtube.com/watch?v=h6KGTfZLTsU#)
.
Anyone have a recommendation for a good fusion forum? I have a front sway bar to put in and the service manual says to lower or remove the subframe! I'm not into that idea...I don't think it's necessry but I'd like to ask some folks that have done it....if I ever get a day off work I have a set of springs, shocks, end links, sway bars and a down pipe to put on!
Generalist
http://www.fordfusionforum.com/ (http://www.fordfusionforum.com/)
Sport
http://www.fusionsportforums.com/forum/ (http://www.fusionsportforums.com/forum/)
Rear wheel bearing is going out on the wife's 2014 Taurus SEL at only 59,000 miles. Anyone heard of them going bad that early?
Has gone out on SHOs with even lower mileage, so I would say yes. Hopefully the hub comes off easy, rust can be a bear in that area.
Quote from: SilvererSHO on April 18, 2018, 12:32:43 PM
Rear wheel bearing is going out on the wife's 2014 Taurus SEL at only 59,000 miles. Anyone heard of them going bad that early?
My front drivers went out on my 2010 at 35K miles...
Quote from: SHOdded on April 18, 2018, 12:37:52 PM
Has gone out on SHOs with even lower mileage, so I would say yes. Hopefully the hub comes off easy, rust can be a bear in that area.
Well that is just too darn bad for the poor sucker that gets to replace it under warranty. ;D
Quote from: SHOdded on April 18, 2018, 12:37:52 PM
Has gone out on SHOs with even lower mileage, so I would say yes. Hopefully the hub comes off easy, rust can be a bear in that area.
Nothing an impact wrench or a torch can't handle :-D
Sent from my iPhone using Tapatalk
Quote from: AJP turbo on April 17, 2018, 09:59:07 PM
Anyone have a recommendation for a good fusion forum? I have a front sway bar to put in and the service manual says to lower or remove the subframe! I'm not into that idea...I don't think it's necessry but I'd like to ask some folks that have done it....if I ever get a day off work I have a set of springs, shocks, end links, sway bars and a down pipe to put on!
ROFL
https://www.ecoboostperformanceforum.com/index.php/board,81.0.html (https://www.ecoboostperformanceforum.com/index.php/board,81.0.html)
Quote from: AJP turbo on April 17, 2018, 09:59:07 PM
Anyone have a recommendation for a good fusion forum? I have a front sway bar to put in and the service manual says to lower or remove the subframe! I'm not into that idea...I don't think it's necessry but I'd like to ask some folks that have done it....if I ever get a day off work I have a set of springs, shocks, end links, sway bars and a down pipe to put on!
http://www.fusionspec.net/ (http://www.fusionspec.net/)
http://car-part.com/ (http://car-part.com/) . Z
Sooooooo got in minor trouble with the wife.... I've had the new SHO for a week and a half and she has already commented on the boxes showing up....
So today my AIRAID shows up in a GIANT box since amazon feels the need to box and already huge box....
Alethia my wife comes out and see's it.. of course her birthday is on Monday so she thinks it's for her... I gently tell her it's for the SHO, and it's just an air filter with a new box... she straight up didn't believe me... and walked away... muttering about how I'm starting all this up again after saying I wasn't going to mess with this car...
I did remind her that good things come in small boxes.. not to worry... like HPFP's come in small boxes... bwahahaha
Sent from my iPhone using Tapatalk
Thatta boy.
Welcome to the pissed off wive's club.
LOL. Allow me to pour you a drink (while you peruse the next websites you'll be placing orders from)......
Now let's fill up that cart.
Quote from: bpd1151 on April 18, 2018, 08:19:42 PM
Thatta boy.
Welcome to the pissed off wive's club.
LOL. Allow me to pour you a drink.
Dear God I cringe at thinking of the conversations between you and Mrs. B....
"Really honey, it's just an audio upgrade.. a few speakers and maybe an amp.. nothing crazy like a new motor...."
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 18, 2018, 08:09:30 PM
Sooooooo got in minor trouble with the wife.... I've had the new SHO for a week and a half and she has already commented on the boxes showing up....
So today my AIRAID shows up in a GIANT box since amazon feels the need to box and already huge box....
Alethia my wife comes out and see's it.. of course her birthday is on Monday so she thinks it's for her... I gently tell her it's for the SHO, and it's just an air filter with a new box... she straight up didn't believe me... and walked away... muttering about how I'm starting all this up again after saying I wasn't going to mess with this car...
I did remind her that good things come in small boxes.. not to worry... like HPFP's come in small boxes... bwahahaha
Sent from my iPhone using Tapatalk
Exactly why I ship everything to work. Wifey non the wiser, plus with the SHO as my DD I might as well be driving a Uhaul truck. I can haul about anything in it and out of sight out of mind...
OMG I'm dying laughing to myself here about the last couple comments above!
The people we love are supposed to take us the way we are and damn it all if they didn't know we love cars before they married us! To hide our passions and have things shipped to other locations etc is NOT what this boy/girl thing is about lol. I totally understand though and somehow it turns into hiding little things which might turn into hiding big things.
I saw a guy at a gas station in front of me who made a complicated transaction by making sure the $40.00 worth of gas he put on the card was mixed in with a bottle of Jack Daniels so it looked like all the money went to gas lol.
I've told my wife that amazon boxes that contained car performance parts were tools or items for work. Am I a bad husband lol?
Quote from: AJP turbo on April 19, 2018, 12:23:48 PM
I've told my wife that amazon boxes that contained car performance parts were tools or items for work. Am I a bad husband lol?
There is a special place in hell for guys like us apparently!
Sent from my iPhone using Tapatalk
Quote from: AJP turbo on April 19, 2018, 12:23:48 PM
I've told my wife that amazon boxes that contained car performance parts were tools or items for work. Am I a bad husband lol?
Nope!!! Lol
Quote from: AJP turbo on April 19, 2018, 12:23:48 PM
I've told my wife that amazon boxes that contained car performance parts were tools or items for work. Am I a bad husband lol?
No way you're not a bad husband, that's what real mean do lol. I hide my packages in the garage and install them at work so she doesn't see my putting new parts on lol
Sent from my Moto Z (2) using Tapatalk
For any Amazon packages that will fit, I ship them to the Amazon Locker at the grocery store near my work. Pitch the box in the company recycling dumpster, and no one's a bit wiser. Ignorance is bliss.
All you guys are cracking me up. Love reading the ways things get hidden. I just buy what I like, no consequences to deal with lol.
Yeah I had a marriage that wow I was like a ghost in the night with stuff!! Lmao Now I have a cool ass g.f. things are good, hell she wanted to ride along with my last log I just did!! She knows me real well already when I say I am done adding hp. She just laughs and walks away. Or if I am looking at parts she's like just buy it now you know you are going to anyways..... lol
haha. My wife does not really care, as long as all the bills are paid. I just keep it on the DL anyway, she knows the brand new car is all modded out, she likes a fast car just as much as I do!
Plus she just got a new hooptie last weekend, so she is spoiled for a while. 2006 Miata, thing is a gokart!
Married life sounds great, lol...
Quote from: FoMoCoSHO on April 19, 2018, 07:37:55 PM
Married life sounds great, lol...
Hahah sign up hahahhaah
Quote from: Skydogs on April 19, 2018, 07:39:40 PM
Quote from: FoMoCoSHO on April 19, 2018, 07:37:55 PM
Married life sounds great, lol...
Hahah sign up hahahhaah
I rode that ride once, can't say I liked it much.
This is a one and done for me if my wife and I end up divorced...
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 19, 2018, 07:50:22 PM
This is a one and done for me if my wife and I end up divorced...
Sent from my iPhone using Tapatalk
Also one and done for your wallet if the worst were to happen...
Quote from: BJSHO on April 19, 2018, 07:50:22 PM
This is a one and done for me if my wife and I end up divorced...
Sent from my iPhone using Tapatalk
X2. specially since I have no children of my own I plan to keep it that way.
Sent from my Moto Z (2) using Tapatalk
Quote from: FoMoCoSHO on April 19, 2018, 07:52:13 PM
Quote from: BJSHO on April 19, 2018, 07:50:22 PM
This is a one and done for me if my wife and I end up divorced...
Sent from my iPhone using Tapatalk
Also one and done for your wallet if the worst were to happen...
As long as the tools in the garage don't get appraised I'm good..... bwhahaha.
Sent from my iPhone using Tapatalk
Hell, my GF asks what tools I want or need. I usually let her get me something for Xmas or B- Day, so she'll be happy. Just not expensive stuff. So she can spend her money on her and I buy what I want, no questions asked.
New Ford Performance 5.0L/5.2L Coyote Oil-Air Separator, Part Number M-6766-A50 | Ford Performance... Z
! No longer available (http://www.youtube.com/watch?v=GM7Vh3cz6Kc#)
love racing in CO when there's still snow on the hills!(https://uploads.tapatalk-cdn.com/20180422/7291fa2b9757f45685578fb5f4bbc1e8.jpg)
Sent from my iPhone using Tapatalk
Good luck!!!!
Sent from my iPhone using Tapatalk
New Vid from (FTM) on Ford Vehicles P0563 System High Voltage Harsh Shifting Concerns: One Item You May Want to Check! Z
! No longer available (http://www.youtube.com/watch?v=FOsICi4C3ss#)
Quote from: BJSHO on April 19, 2018, 07:54:16 PM
Quote from: FoMoCoSHO on April 19, 2018, 07:52:13 PM
Quote from: BJSHO on April 19, 2018, 07:50:22 PM
This is a one and done for me if my wife and I end up divorced...
Sent from my iPhone using Tapatalk
Also one and done for your wallet if the worst were to happen...
As long as the tools in the garage don't get appraised I'm good..... bwhahaha.
Sent from my iPhone using Tapatalk
2008: I wish all GOOD Luck, Just Prior to my Divorce the Wife (soon to be X) Showed
up at work and Did a Walk Thru, Taking Visual Stock of everything ("oops" She Missed
Overhead Door No 2: "the bike Room") and then She Filed on my Ass, First Strike, AHH
Still it was worth every Penny... Get Married Again....?
When Hell Freezes Over
What is your "get on it per mile" ratio? I'd say I accelerate away from a light or down an on ramp hard at WOT up to 80 MPH or so about every 30 miles on average. In that same 30 miles I probably pass a couple of cars at WOT and accelerate out of a corner/driveway or two hard up to 40 MPH or so. I also get on the brakes pretty hard 2 times maybe. Haven't taken many corners too hard for damn near 7 months now due to having the POS Firestone All Seasons on it for this miserable long winter. Putting the Firehawks back on in 2-3 weeks.
It's not just the SHO that needs attention... the baby ecoboost and the jeep need love sometimes....
(https://uploads.tapatalk-cdn.com/20180429/4c53d074f8cf7d4bc3bb5e1ffe263b78.jpg)
Sent from my iPhone using Tapatalk
I am cracking up at reading your wife stories.
When my motor first blew, just to give my wife a hard time, I told her it was cause she put 87 in it. I let that go on for a couple weeks. Am I bad too? Lol
Quote from: FearlessAZ on April 29, 2018, 11:10:26 AM
I am cracking up at reading your wife stories.
When my motor first blew, just to give my wife a hard time, I told her it was cause she put 87 in it. I let that go on for a couple weeks. Am I bad too? Lol
Now that's just evil..... hahaha
Sent from my iPhone using Tapatalk
Caps owned the Penguins today... just a nice friendly PSA...
Sent from my iPhone using Tapatalk
Quote from: BJSHO on April 29, 2018, 06:06:36 PM
Caps owned the Penguins today... just a nice friendly PSA...
Sent from my iPhone using Tapatalk
It's ok...ovi will still choke...holtby too
Quote from: AJP turbo on April 29, 2018, 08:55:49 PM
Quote from: BJSHO on April 29, 2018, 06:06:36 PM
Caps owned the Penguins today... just a nice friendly PSA...
Sent from my iPhone using Tapatalk
It's ok...ovi will still choke...holtby too
And you good Sir can go f**k yourself... respectively of course.
Sent from my iPhone using Tapatalk
Quote from: AJP turbo on April 29, 2018, 08:55:49 PM
Quote from: BJSHO on April 29, 2018, 06:06:36 PM
Caps owned the Penguins today... just a nice friendly PSA...
Sent from my iPhone using Tapatalk
It's ok...ovi will still choke...holtby too
And it's Holtbeast... get it right....
Sent from my iPhone using Tapatalk
Ovi scored the game winning goal... caps take series lead 2-1 :-)
Sent from my iPhone using Tapatalk
Just ordered my 2018 company car... 2018 Ford Escape SE was the free option this year... took it.. comes with the baby 1.5L Ecoturd... base options.. but does come with the Ford Safe and Smart Package... Magnetic Metallic with Black Interior... not bad for a free car I get to use for personal and work...
Quote from: BJSHO on May 01, 2018, 10:25:04 PM
Ovi scored the game winning goal... caps take series lead 2-1 :-)
Sent from my iPhone using Tapatalk
Looks like ovi didn't have any shots last night...looks like the lump in the throat is forming and the choking is about to start
Quote from: AJP turbo on May 04, 2018, 10:19:23 AM
Quote from: BJSHO on May 01, 2018, 10:25:04 PM
Ovi scored the game winning goal... caps take series lead 2-1 :-)
Sent from my iPhone using Tapatalk
Looks like ovi didn't have any shots last night...looks like the lump in the throat is forming and the choking is about to start
Yea yea... series is still tied 2-2....
Bullsh*t suspension on Wilson... typical NHL trying to force a game 7...
Sent from my iPhone using Tapatalk
Quote from: BJSHO on May 04, 2018, 08:02:05 AM
Just ordered my 2018 company car... 2018 Ford Escape SE was the free option this year... took it.. comes with the baby 1.5L Ecoturd... base options.. but does come with the Ford Safe and Smart Package... Magnetic Metallic with Black Interior... not bad for a free car I get to use for personal and work...
What's wrong with the 1.5 eco? You sir have been spoiled by a twin turbo V6! And if it was my 1.5 it would have at least 200 hp and get 40mpg? What would be so wrong with that?
Quote from: AJP turbo on May 04, 2018, 10:24:47 AM
Quote from: BJSHO on May 04, 2018, 08:02:05 AM
Just ordered my 2018 company car... 2018 Ford Escape SE was the free option this year... took it.. comes with the baby 1.5L Ecoturd... base options.. but does come with the Ford Safe and Smart Package... Magnetic Metallic with Black Interior... not bad for a free car I get to use for personal and work...
What's wrong with the 1.5 eco? You sir have been spoiled by a twin turbo V6! And if it was my 1.5 it would have at least 200 hp and get 40mpg? What would be so wrong with that?
It's terribly under powered... and I get about 27mpg in it. You stand on it and nothing...lots of engine noise... nothing happening...
And it's a company car so no tuning...
Sent from my iPhone using Tapatalk
Quote from: BJSHO on May 05, 2018, 10:39:25 PM
Quote from: AJP turbo on May 04, 2018, 10:24:47 AM
Quote from: BJSHO on May 04, 2018, 08:02:05 AM
Just ordered my 2018 company car... 2018 Ford Escape SE was the free option this year... took it.. comes with the baby 1.5L Ecoturd... base options.. but does come with the Ford Safe and Smart Package... Magnetic Metallic with Black Interior... not bad for a free car I get to use for personal and work...
What's wrong with the 1.5 eco? You sir have been spoiled by a twin turbo V6! And if it was my 1.5 it would have at least 200 hp and get 40mpg? What would be so wrong with that?
It's terribly under powered... and I get about 27mpg in it. You stand on it and nothing...lots of engine noise... nothing happening...
And it's a company car so no tuning...
Sent from my iPhone using Tapatalk
Isn't it supposed to be under powered being a 1.5? I guess the idea is to be able to go 80mph and it does that but did the epa change the fuel economy tests? Why does that 1.5 not get 30mpg on the highway? I just looked at the specs and I don't get that?
Quote from: AJP turbo on May 05, 2018, 11:05:25 PM
Quote from: BJSHO on May 05, 2018, 10:39:25 PM
Quote from: AJP turbo on May 04, 2018, 10:24:47 AM
Quote from: BJSHO on May 04, 2018, 08:02:05 AM
Just ordered my 2018 company car... 2018 Ford Escape SE was the free option this year... took it.. comes with the baby 1.5L Ecoturd... base options.. but does come with the Ford Safe and Smart Package... Magnetic Metallic with Black Interior... not bad for a free car I get to use for personal and work...
What's wrong with the 1.5 eco? You sir have been spoiled by a twin turbo V6! And if it was my 1.5 it would have at least 200 hp and get 40mpg? What would be so wrong with that?
It's terribly under powered... and I get about 27mpg in it. You stand on it and nothing...lots of engine noise... nothing happening...
And it's a company car so no tuning...
Sent from my iPhone using Tapatalk
Isn't it supposed to be under powered being a 1.5? I guess the idea is to be able to go 80mph and it does that but did the epa change the fuel economy tests? Why does that 1.5 not get 30mpg on the highway? I just looked at the specs and I don't get that?
Yea, but not underpowered to the point of not being able to merge onto a highway safely... if you are coming in and there is a fast car coming or a tractor trailer you pretty much have to slow down to merge which sucks...
In any event.... I have taken a lot of road trips... 70mph with cruise control nets me about 28.5mph... never seen 30mpg...
Sent from my iPhone using Tapatalk
Yeah, escaping reality is hard.
I feel for you getting the 1.5EB in an Escape. Ugh!!! I couldn't imagine driving one witj that motor. Wife loves hers. Only way we would took it, is because it had the 2.0EB. Def scoots along nicely. Only way to get one now is in the Titanium packaged ones. Think because the new Ecosport and Edge are getting most of the 2.0s
Was at BSD no prep race yesterday, was very cool. Mother nature seemed to affect the field as some cars didnt show. Also ended up talking with a couple local guy that work with turbos cars. Shoiwed them the SHO, and asked them about making me a set of hot pipes. They said no problem. This wont be done till winter when I can let the car sit and remove the factory pipes off and let them yse them as a guide.
The time has finally come to find out if my warranty claims will be justified this coming Friday after many many months of back and forth with my local friendly Ford dealer,fingers crossed. Z
Quote from: ZSHO on May 07, 2018, 05:56:02 PM
The time has finally come to find out if my warranty claims will be justified this coming Friday after many many months of back and forth with my local friendly Ford dealer,fingers crossed. Z
I will keep my fingers crossed. Are they claiming the modifications are voiding the warranty?
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on May 07, 2018, 05:59:04 PM
Quote from: ZSHO on May 07, 2018, 05:56:02 PM
The time has finally come to find out if my warranty claims will be justified this coming Friday after many many months of back and forth with my local friendly Ford dealer,fingers crossed. Z
I will keep my fingers crossed. Are they claiming the modifications are voiding the warranty?
Sent from my iPhone using Tapatalk
What Mods! Lol. I will produce more info pending the outcome,many Thanks. Z
:help: :help2: :boxing: :boxing:
New video from FTM on This is Why Maintaining the Ford 5.4L 3v Triton Engine is so Important! .Z
TWO IDENTICAL MOTORS! INTERESTING FIND!
! No longer available (http://www.youtube.com/watch?v=VJgu-g5Eq0w#)
Hmmm looks like turbos, Downpipes, meth, and suspension are only things left... all of which are a PIA to pull of if warranty work is needed....
Looks like I'm at standstill for a bit...
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on May 07, 2018, 08:27:04 PMLooks like I'm at standstill for a bit....
Nothing wrong with being at a stand still. Nothing at all.
Sometimes pause, intentional or otherwise, is a good thing.
Gives one time to appreciate what not only has been performed thus far, but also provides time for re-evaluation, as well as an opportunity to re-prioritize future projects.
There were some things I was hoping to have accomplished for this year's giant Ford Nationals, but no such luck.
Just been to busy and the wallet's been being used for the older 2 kids and all the expenses related to their college and rooming, etc.
All in due time my friend.
Miss you dudes! Little guy is keeping me busy. He's 11 mos old on Wednesday and just started walking a few unassisted steps (3-5) on Star Wars Day. :)
(https://uploads.tapatalk-cdn.com/20180508/1f50061a4b24f355f37a9c904b4e21f5.jpg)
It finally got warm in SE Wisconsin last week, and I discovered the A/C in the Xploder was out. Found a sizable hole in a hard line running to the rear aux unit. Just my luck, it's one that requires rear subframe removal to replace the line, which runs nearly the entire length of the vehicle. I will be attempting my first ever aluminum line repair/patch in the next few days to avoid a $1700 repair bill.
Little guy might get his first real lesson in auto repair and colorful language.
Hope you all are well! I'll update you on whether or not my fix(es) work. Found a couple of interesting gadgets that might help someone out in the future.
T-T-F-N!
Sent from my iPhone using Tapatalk
Betcha the little guy will have it figured out before you begin work on the X! Cute AND smart!!!
No way to just braze the line, evacuate the system, then refill? Maybe weld a collar over the area? Why did the hole happen in the first place? Was it rubbing against something?
@AJPTURBO
(https://media1.tenor.com/images/97b012ba2b0511efadc897db0e35e4c9/tenor.gif?itemid=7790622)
(https://media1.tenor.com/images/8e755e68777221529dea5e0db5ea29dd/tenor.gif?itemid=5530548)
Quote from: SHOdded on May 07, 2018, 09:58:16 PM
Betcha the little guy will have it figured out before you begin work on the X! Cute AND smart!!!
No way to just braze the line, evacuate the system, then refill? Maybe weld a collar over the area? Why did the hole happen in the first place? Was it rubbing against something?
Haha! Totally!
No need to evacuate the system; it's completely empty and bleeds off any pressure added within a few hours. When I last charged the system to add UV dye, I could actually hear it hissing after shutting off the engine and walking back to the garage.
I found an aluminum solder kit made by Uniweld specifically intended for aluminum repairs like this. That will be my first try. It's in an elbow, and adjacent to several other lines, which makes it a bit tricky to weld on.
Hard to say what caused the problem in the first place. There's nothing to rub on and it's pretty well shielded from any road debris hitting it. Being in an elbow, I wonder if it's a quality/porosity issue with the aluminum exacerbated by the bend operation. It's a little difficult to tell in the photo, but it looks pitted with a pin hole in the middle. In trying to troubleshoot the problem, I don't run across many AC line leaks on the 5th gen Explorer, so it seems to be more of a rarity.
(https://uploads.tapatalk-cdn.com/20180508/39e29e43efb467af99d4eed79c80c544.jpg)
Sent from my iPhone using Tapatalk
I hope that is dirt on the outside of the line and not actual erosion of the material. If there is erosion, may be better off replacing the line. Really unusual layout.
Quote from: SHOdded on May 07, 2018, 10:16:47 PM
I hope that is dirt on the outside of the line and not actual erosion of the material. If there is erosion, may be better off replacing the line. Really unusual layout.
I hope so, too! I suspect some of it is dirt mixed with some oil that blew out of the line. I will check it out more closely when I clean it up. For the repair.
I'll take some more pics and create a repair post if I'm able to fix it. :)
Sent from my iPhone using Tapatalk
It seems that summer-blend gasoline has hit many regions ahead of schedule this year. Z :yeah:
https://www.google.com.br/amp/s/mobile.reuters.com/article/amp/idUSKBN1GX2O3 (https://www.google.com.br/amp/s/mobile.reuters.com/article/amp/idUSKBN1GX2O3)
Interesting. I have not seen any impact yet ...
Quote from: ZSHO on May 08, 2018, 06:59:13 PM
It seems that summer-blend gasoline has hit many regions ahead of schedule this year. Z
https://www.google.com.br/amp/s/mobile.reuters.com/article/amp/idUSKBN1GX2O3 (https://www.google.com.br/amp/s/mobile.reuters.com/article/amp/idUSKBN1GX2O3)
I wouldn't know it based on my knock sensor lol... ended up adding 3 gallons of E85 to my last fill to completely get rid of any Kr... luckily my new pump just laughs at E20 mixes... gonna try E30 next to see how it does...
Sent from my iPhone using Tapatalk
Here's another article on the transition effect...Dunno. Z
Refiners are currently switching to make summer-grade gasoline ahead of the May 1 compliance date for refiners and product terminals.
https://www.eia.gov/todayinenergy/detail.php?id=11031 (https://www.eia.gov/todayinenergy/detail.php?id=11031)
Must be the California version of the summer blend. 87 really means 85, 89 means 87 and 93 means 91. Welcome to the new world!!!
Quote from: SHOdded on May 08, 2018, 08:38:55 PM
Must be the California version of the summer blend. 87 really means 85, 89 means 87 and 93 means 91. Welcome to the new world!!!
Hmmm. Yeah cant have any real stuff. Just ban / lower everything so we cant hurt ourselves and or others.
LOL
2011 Taurus SHOx @ SEMA 2010
https://www.youtube.com/watch?v=ZSksSg-GK0w (https://www.youtube.com/watch?v=ZSksSg-GK0w)
https://www.autoblog.com/photos/sema-2010-ford-taurus-shox/ (https://www.autoblog.com/photos/sema-2010-ford-taurus-shox/)
https://www.facebook.com/taurussho/posts/118004071597848 (https://www.facebook.com/taurussho/posts/118004071597848)
Now for sale in FLORIDA?
https://orlando.craigslist.org/cto/d/2011-ford-sho-sema-500-hp-awd/6583623624.html (https://orlando.craigslist.org/cto/d/2011-ford-sho-sema-500-hp-awd/6583623624.html)
====================
2011 Police Interceptor at SEMA 2010
https://www.youtube.com/watch?v=TwBP4b3u2nU (https://www.youtube.com/watch?v=TwBP4b3u2nU)
I found this while on (engineering mode). Im currently on my phone but will provide some better pics soon. Z
(https://i.imgur.com/bsW3znFh.jpg)
(https://i.imgur.com/AdA6l10h.jpg)
(https://i.imgur.com/u9Dpu7wh.jpg)
Quote from: ZSHO on May 09, 2018, 10:21:04 AM
I found this while on (engineering mode). Im currently on my phone but will provide some better pics soon. Z
Not sure what that data is telling me?
And how do you get into engineering mode? I know there is a thread for it, I couldn't find it via search.
Sent from my iPhone using Tapatalk
HOW TO :)
https://www.ecoboostperformanceforum.com/index.php/topic,6955 (https://www.ecoboostperformanceforum.com/index.php/topic,6955)
PTU report: I sucked out 75% or so of the PTU fluid in the wifes '14 SEL and replaced it with Amsoil last weekend. I used the same tube to fill it as I did to suck it out so when I added to the PTU the tube was low in the PTU and I pumped in 6-8 ounces or so extra and let it come out of the drain plug hole. So, I'm hoping it's mostly Amsoil now. I'll do it again in a few thousand miles. Small build up of stuff on the drain plug magnet. Hers at 59,000 miles looked much better than mine did at 42,000 miles. I had to add to mine and drive it around my yard just to be able to suck the crap out. Her's at least flowed when it was warm and was able to be sucked out. BTW, a 3.5 L SEL is harder to do than a SHO because of the cat location so we have that going for us at least.
:thumb: :thumb:
Getting my learn on...
(https://uploads.tapatalk-cdn.com/20180510/617922c40fa7128ee2cb02e457ea92b3.jpg)
Sent from my OnePlus 5 using Tapatalk
Quote from: hawkeye93 on May 09, 2018, 09:04:52 PM
Getting my learn on...
(https://uploads.tapatalk-cdn.com/20180510/617922c40fa7128ee2cb02e457ea92b3.jpg)
Sent from my OnePlus 5 using Tapatalk
Those are good books...I have them lol....I used to read those while my girlfriend at the time read novels
Quote from: AJP turbo on May 09, 2018, 11:14:03 PM
Quote from: hawkeye93 on May 09, 2018, 09:04:52 PM
Getting my learn on...
(https://uploads.tapatalk-cdn.com/20180510/617922c40fa7128ee2cb02e457ea92b3.jpg)
Sent from my OnePlus 5 using Tapatalk
Those are good books...I have them lol....I used to read those while my girlfriend at the time read novels
And I suppose Fabio never studied advanced engine management books in the love novels she was reading at the time so she kicked your lame butt to the curb and set out for adventure? :pokey:
Quote from: SilvererSHO on May 10, 2018, 01:06:02 AM
Quote from: AJP turbo on May 09, 2018, 11:14:03 PM
Quote from: hawkeye93 on May 09, 2018, 09:04:52 PM
Getting my learn on...
(https://uploads.tapatalk-cdn.com/20180510/617922c40fa7128ee2cb02e457ea92b3.jpg)
Sent from my OnePlus 5 using Tapatalk
Those are good books...I have them lol....I used to read those while my girlfriend at the time read novels
And I suppose Fabio never studied advanced engine management books in the love novels she was reading at the time so she kicked your lame butt to the curb and set out for adventure? :pokey:
Hey she married me so I must have a lil something going on that she liked ha
Quote from: AJP turbo on May 10, 2018, 08:28:10 AM
Quote from: SilvererSHO on May 10, 2018, 01:06:02 AM
Quote from: AJP turbo on May 09, 2018, 11:14:03 PM
Quote from: hawkeye93 on May 09, 2018, 09:04:52 PM
Getting my learn on...
(https://uploads.tapatalk-cdn.com/20180510/617922c40fa7128ee2cb02e457ea92b3.jpg)
Sent from my OnePlus 5 using Tapatalk
Those are good books...I have them lol....I used to read those while my girlfriend at the time read novels
And I suppose Fabio never studied advanced engine management books in the love novels she was reading at the time so she kicked your lame butt to the curb and set out for adventure? :pokey:
Hey she married me so I must have a lil something going on that she liked ha
Ahhhh....your girlfriend at the time became your wife, not someone else's girlfriend. Gotcha.😉
Check out mobil ones filter
Think they are a little small.
What you think?
This is for my 01 impreza
(https://uploads.tapatalk-cdn.com/20180511/ebf73000a6287c116d891b9a92aa3f25.jpg)(https://uploads.tapatalk-cdn.com/20180511/53cc645f9311475831c995834a19d4d1.jpg)(https://uploads.tapatalk-cdn.com/20180511/74f3c7bcde5e740a4be1ad244ed0e943.jpg)
Sent from my Pixel 2 XL using Tapatalk
Coz Fram could not Cram everything in there? IDK. That is a sizeable difference on the outside, if we can find a cutaway of both for comparison, we can see if it amounts to anything. I thought Mobil1 filters were a bit larger than OEM, if I still have one on the shelf I will check.
(https://www.ecoboostperformanceforum.com/index.php?action=dlattach;topic=463.0;attach=17944;image)
Two random thoughts of the day
1) For the last [many] months, McDonald's has been promoting all sizes of soft drinks and coffee for $1. And the price went back up to their normal menu prices. My personal struggle was the convenience of turning right into McDonald's and grabbing my large black coffee, and then right back onto the main road on the way to work versus turning left into Tim Horton's and left back onto the main road in similar fashion. Now that McD is back to normal, Tim Horton's will again get my business at $2 per cup.
2) My SHO has been at the dealership since Tuesday afternoon getting a few things checked over before part of my warranty is no more. In for sunroof vibration, right rear hub howling, and a sound in the steering column that sounds like a pair of marbles rolling around a solo cup when I turn right... apparently the last is some sort of spring mechanism that a few people claim should have been a recall but not enough people reported it? My loaner is a 2018 Explorer XLT with 4wd and the n/a V6. Its fine, but I am ready to have my SHO back today lol
Tim Hortons coffee is no better than McD's???
That sound I have heard described for suspension and exhaust components, never the steering column.
Quote from: SHOdded on May 11, 2018, 08:50:31 AM
Tim Hortons coffee is no better than McD's???
That sound I have heard described for suspension and exhaust components, never the steering column.
Tim Horton's tastes better IMO, but when McD was $1, the value proposition made me go to McD more often
Will update when I know more about what the deal was with the steering column spring
The new updated parts have been ordered and approved after many months of back and forth with the Ford Dealer and the ESP Warranty co concerning Code C1B00 ....
I should have everything installed next week..
Here is the latest supersession to TSB 14-0186 WHICH HAS A FEW NEW REVISION PARTS as per updated TSB.... hope this helps someone out. Z
F2G7-7G273 - Washer Axle (Thrust Washers)
W520215-S440 - Nut Tie Rod End
9L8Z-1177-C - Seal 4WD Axle Right side
3B436-3K305 - Right Side Axle Joint Assembly
(https://i.imgur.com/8jO6L1uh.jpg?1)
Previous TSB for comparison
https://drive.google.com/file/d/0B8JUL90DXgdiQlZKd29scTd0eUU/view
Daughter got her Old DAD a Cool present. Z :)
(https://i.imgur.com/vatsvS3h.jpg)
A ceiling-mounted bust?
Quote from: ZSHO on May 12, 2018, 08:01:29 AM
Daughter got her Old DAD a Cool present. Z :)
(https://i.imgur.com/vatsvS3h.jpg)
That's awesome! Not a fan of NY... BUT that's a cool gift... would look better with a Nats curly W on the hat though ;-)
Sent from my iPhone using Tapatalk
Quote from: hawkeye93 on May 12, 2018, 09:10:36 AM
A ceiling-mounted bust?
Might make for a cool shift knob even.
And yes Z, a unique gift from your daughter. Very cool.
Was going to start installing the parts I pulled off of my PI on my SHO, but then I noticed a softball sized spot of transmission fluid under the car. Guess I'll have to wait on that until the dealer takes care of it. Not very confidence inspiring for a car with less than 300 miles on it.
Quote from: 5ohSHO on May 12, 2018, 02:15:21 PM
Was going to start installing the parts I pulled off of my PI on my SHO, but then I noticed a softball sized spot of transmission fluid under the car. Guess I'll have to wait on that until the dealer takes care of it. Not very confidence inspiring for a car with less than 300 miles on it.
Say What ? Wow
Maybe transPTU seal leak? Hoping for a simple fix.
I'm hoping it is something simple also. The car drove just fine up until I parked it after noticing the leak. I seem to have an ability for buying defective stuff.
:(
Last filter on earth I would use is anything FRAM=POS.....even on a Subie.....for our cars FL500S is really the best option so you get no timing chain noise....just saying
https://www.caranddriver.com/news/engines-with-small-individual-turbos-for-each-cylinder-could-revolutionize-downsizing
Could be fun...
Sent from my iPhone using Tapatalk
Free SiriusXM Radio & Travel link Now Through May 31, Great for Road Trips! Z :)
(https://i.imgur.com/o6ZvnGmh.jpg)
(https://i.imgur.com/eR47uhlh.jpg)
Quote from: avidmotion on May 13, 2018, 04:30:11 PM
Last filter on earth I would use is anything FRAM=POS.....even on a Subie.....for our cars FL500S is really the best option so you get no timing chain noise....just saying
I am really happy with the Royal Purple oil filter but I agree that I would never use a Fram oil filter. However, I have used their air filters on several occasions without problems (although never on the Mustang or the SHO...)
Will have to download the Sirrus Travel Link on the SHO and the Explorer! Thanks for the heads up Z!
New Vid from (FTM) on Ford 3.5L 3.7L Duratec V6 Chain Driven Water Pump Failures: Check it Before it Destroys Your Engine! . Z
! No longer available (http://www.youtube.com/watch?v=R3-NOGZL8ms#)
The value of Blackstone analysis proved itself out for this Edge owner.
Quote from: mjhpadi on May 14, 2018, 09:29:06 AM
Will have to download the Sirrus Travel Link on the SHO and the Explorer! Thanks for the heads up Z!
Its my pleasure MJ! Enjoy. Z :)
Mother Nature @ its Best. Z :)
(https://i.imgur.com/jVyewYmh.jpg)(https://i.imgur.com/KJold62h.jpg)
They have lied to me my entire life!? The end of the rainbow doesn't have a pot of gold, but an SHO!?
Sent from my iPhone using Tapatalk
If your currently an Amazon prime member or looking to subscribe,the new annual membership Fee will be $119.00 . Z
Dear Prime Member,
Thank you for being a valued member of Amazon Prime. We are writing to you about an upcoming change to your membership.
The price of the annual Prime membership increased from $99 to $119
I have to mow my yard and now i have to pay another $19 a year for prime. :(
I did however just engage in heavy nerf battle with a three year old who is a champ at head shots! So basically my random thought is everything is just fine.
Prime membership is a profit center for Amazon it seems lol.
Ha ha nerf battle!!!
They must be turning a major profit otherwise why would they do it? I know we save at least triple the $119 a year just on shipping.
Maybe they make a lot on the TV end of prime, we use the prime tv a lot but only for the included stuff. I think its around $6-7 to watch the un included movies and shows.
We live 30 mins away from any wal mart type store so most of our junk gets ordered through amazon or ebay. I found plugs for the sho on ebay for $5 each, the jap made motorcraft ngk copies even.
I used to order rotella t6 for my old truck from wal mart, free shipping when your buying $100 worth of oil. Lol
Random thought #2 for today.
I know im lining someones pockets by paying for prime but it saves me money, but, with the risk of becoming a slave to convenience.
Nerf War is a good time dude, especially with a three year old. Lols
Maaannnn bummed prime is increasing in price. That said I doubt it is a big profit center? The people I know that have it all use it heavily. I know my home does, and the freight amount we save with 2 day shipping is huge. That costs them a good bit.
Well, with local distribution centers, AMZN has cut down on freight costs AND i now have to pay taxes. In all seriousness i dont think prime is a profit center IF you use it to the fullest extent. Question is what percentage of members do. With any group, theres a distribution, and I do not know that distribution here.
Here's Fords Direct line for future reference!
Ford Corporate phone number 1800-392-ford (3673)
I can't believe I'm gonna write this but it's the truth...
From a quality and refinement standpoint, the CMAX is the best Ford I've ever owned. (Titanium trim)
I experienced unfamiliarity from others with the SHO package, but literally NOBODY knows this car even exists.
Everyone is blown away when they sit inside, the fit and finish is SUPERB. The view out the windshield is quite incredible. Blind spots? What are those? The gauges are beautiful and for my size, everything is right where it needs to be. Switchgear feels solid. Console and dash trim is beautiful. They even put suede on the back of the seat belt receiver so the console doesn't get scratched. The black hole between the seat and door where all the dirt goes to die has been replaced by a tray that catches all the debris...I could go on and on.
WTF is wrong with you Ford?
Something has changed drastically since Mulally left. He was one of us. He could drive any car in the world and he drove a SHO. He made Ford great again. He made money selling cars.
I suspect "enlightened progressives" (AKA commie rat bastards) that are more concerned with "diversity" and other SJW signal virtueing may be to blame. I'm honestly wondering if one of America's greatest icons is being destroyed from inside on purpose.
SMDH
Hopefully an ugly period with a very short lifespan.
Oh and for any FMC employees who are reading this I'm coming from the position of a shareholder and owner of the following...
198? escort
1990 Taurus SHO
1992 Taurus SHO
1998 Lincoln Continental
2001 ZX2
2004 Focus ZTS
2006 Focus ST
2009 Focus SE
2010 Focus SES
2006 Fusion SEL
2011 FusionSport
2012 Fusion Sport AWD
2013 Taurus SHO
2015 Taurus SHO PP
2011 Lincoln MKS Ecoboost package
2015 Focus S
2018 Cmax Titanium
I bleed Ford blue and when our family gets together its like a damn Ford convention in front of my house.
Newsflash, WE ALL DRIVE CARS, not trucks!
Quote from: FoMoCoSHO on May 17, 2018, 09:27:35 PM
Oh and for any FMC employees who are reading this I'm coming from the position of a shareholder and owner of the following...
198? escort
1990 Taurus SHO
1992 Taurus SHO
1998 Lincoln Continental
2001 ZX2
2004 Focus ZTS
2006 Focus ST
2009 Focus SE
2010 Focus SES
2006 Fusion SEL
2011 FusionSport
2012 Fusion Sport AWD
2013 Taurus SHO
2015 Taurus SHO PP
2011 Lincoln MKS Ecoboost package
2015 Focus S
2018 Cmax Titanium
I bleed Ford blue and when our family gets together its like a damn Ford convention in front of my house.
Newsflash, WE ALL DRIVE CARS, not trucks!
I had a ZX2... modified the hell out of it! Used to take out the WRXs in the area lol... pissed them
Off bad...
Sent from my iPhone using Tapatalk
Man I tell 'ya.....
$40 for a 5gal. pail of VP Racing Fuels M1 Methanol.
Can't beat that, that's for sure! :thumb:(https://uploads.tapatalk-cdn.com/20180518/802d0c6eaef458b4a8fdf0596db50b4f.jpg)
Quote from: bpd1151 on May 18, 2018, 02:10:42 PM
Man I tell 'ya.....
$40 for a 5gal. pail of VP Racing Fuels M1 Methanol.
Can't beat that, that's for sure! :thumb:(https://uploads.tapatalk-cdn.com/20180518/802d0c6eaef458b4a8fdf0596db50b4f.jpg)
(https://uploads.tapatalk-cdn.com/20180518/573b1e5f5033191674dc3a8ccea21be5.jpg)
Challenge accepted!!!!
$36.25....
Sent from my iPhone using Tapatalk
That's awesome! Even better for sure!
For being in the Midwest, especially with Illinois's craptastic fee(s), multiple taxes, etc. I was/am elated for what I got it at.
But you good sir, did even better!
***bows***
Quote from: bpd1151 on May 18, 2018, 02:16:03 PM
That's awesome! Even better for sure!
For being in the Midwest, especially with Illinois's craptastic fee(s), multiple taxes, etc. I was/am elated for what I got it at.
But you good sir, did even better!
***bows***
Yea, I noticed the taxes on your receipt... F that....
Unfortunately the 2010 is no more so I never really got to use that particular purchase... ended up giving it away...
Maybe I should pick up a meth kit for 2016 no? Just to cool the charge down a bit ;-)
Sent from my iPhone using Tapatalk
I would, FOR SURE!
$10 cheaper than here. I can get Sunoco Methanol for $3.00 a gallon. Place buys it in bulk for the circle track cars.
New VID on 2006-2010 Ford Explorer Transmission Shifting Issues Wrench Light: Check This Item First!! . Z :)
! No longer available (http://www.youtube.com/watch?v=ybmoHK5WQ3o#)
Note to self... make sure the SHO is pulled out of the garage before having the driveway sealed....
(https://uploads.tapatalk-cdn.com/20180522/c30a8b3b8b484b821ef82fe26e785ee2.jpg)
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on May 21, 2018, 08:51:46 PM
Note to self... make sure the SHO is pulled out of the garage before having the driveway sealed....
(https://uploads.tapatalk-cdn.com/20180522/c30a8b3b8b484b821ef82fe26e785ee2.jpg)
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20180522/a3ccc74791f9c9963bbff4554604aec4.jpg)
Haha. Oopsie!
Look on the positive..... just less miles placed on her, which is better, rather than not.
As far as Amazon, I have been using walmart online, shipping is cheap, says 6 to10 days, i get in 2 everytime. So far cheaper then amazon or equal, even with tires!
Hey Guys,
It's my birthday today and I bought myself a nice present to keep the SHO company in the garage lol.
(https://i.imgur.com/GQNNrJhh.jpg)
Quote from: polskifacet on May 22, 2018, 08:39:26 AM
Hey Guys,
It's my birthday today and I bought myself a nice present to keep the SHO company in the garage lol.
Gorgeous bike
That's awesome!!! Happy birthday and congrats on the new bike!
Sent from my iPhone using Tapatalk
Many happy returns of the day!
:bday: Polski! :bday: Congrats on the new Hog! Z
Quote from: ZSHO on May 22, 2018, 12:00:43 PM
:bday: Polski! :bday: Congrats on the new Hog! Z
It's not a hog it's an injun!
Got my SHO back from the dealer for an inner PTU seal replacement, which was causing the leak on my brand new car, only to notice my radiator fans seemed to be on full blast when I got home. I've never noticed that before so I looked at the temp gauge and it was over 3/4's of the way to the top! Pulled the car in the garage and found NO coolant in the tank. I'm not sure what all stuff has to be removed for that job, but it was certainly full when I dropped it off. Not to mention the greasy hand prints all over the outside of the car. This is exactly why I prefer to do all of my own work.
Dang whackamole! PP has the cooling package for the PTU, so possibly they drained the coolant? No excuse for the hand prints tho!
Quote from: SilvererSHO on May 22, 2018, 04:03:52 PM
Quote from: ZSHO on May 22, 2018, 12:00:43 PM
:bday: Polski! :bday: Congrats on the new Hog! Z
It's not a hog it's an injun!
Its still a Hog in my neck of woods. Lol. Z
(https://uploads.tapatalk-cdn.com/20180524/bafb2b9a588605464cb414c8f4f6d7bd.jpg)
Sent from my iPhone using Tapatalk
Not sure if I'm asking in the right place but, can anyone confirm if SHO/Flex PPE catted DP's will fit on a explorer sport?
Quote from: JagerBomb on May 24, 2018, 02:01:48 PM
Not sure if I'm asking in the right place but, can anyone confirm if SHO/Flex PPE catted DP's will fit on a explorer sport?
Here is goes! Z :)
https://www.ecoboostperformanceforum.com/index.php/topic,4755.msg75320.html#msg75320 (https://www.ecoboostperformanceforum.com/index.php/topic,4755.msg75320.html#msg75320)
When the window washer low warning comes on and you initial thought is "Oh Sh!t" but then remember your not running meth anymore so your relieved... but then sad cause your just not that fast anymore...
Who knew a low fluid warning could cause so many emotions!
Sent from my iPhone using Tapatalk
I spotted this previous GEN-SHO which sounded pretty darn good IMO and was ready to confront the guy until finding out it was a very older gentlemen!
It was probably a Magnaflow exhaust!! Dunno. Z
(https://i.imgur.com/2cPYFyGh.jpg?1)
(https://i.imgur.com/77hgaIih.jpg?1)
Here's a shoutout for speedway 87....the MKS has been detuned for quite a while getting things handled, new car, etc and we've been running their 87. Oar was at -.61 before I added tune and corn.
Now testing 87 + E85
Initial impressions....17 psi spikes and zero KR.
Pic was before fillup and tune.
New video from (FTM) on Ford 4x4 Vehicles With Low Transmission Fluid and No Leaks: Check This First! . Z
! No longer available (http://www.youtube.com/watch?v=lQnbpv5xAMU#)
Really loving my new ride . . . the tesla taurus!
(https://uploads.tapatalk-cdn.com/20180531/16ee099c65d2a3ef690f225dcd72b7e7.jpg)
Sent from my iPhone using Tapatalk
LOL
I think I can officially say the Red Head is back in business after a long haul of trouble-shooting traction issues for quite some time now.
Today I took her to a remote field and wasted a good gallon of M1 with absolutely no codes registered.
I also discovered that the Tial -8psi spring is way to soft based on registed vacuum reading and the correct spring would be the -10psi spring as per Tial Q-Series BOV.....
I will not comment further on performance but rather SHO a Time slip as soon as mother nature once complies. Z :)
Stoked to see the results!! Go get em Z!
Sent from my iPhone using Tapatalk
Quote from: FoMoCoSHO on May 27, 2018, 05:33:01 PM
Here's a shoutout for speedway 87....the MKS has been detuned for quite a while getting things handled, new car, etc and we've been running their 87. Oar was at -.61 before I added tune and corn.
Now testing 87 + E85
Initial impressions....17 psi spikes and zero KR.
Pic was before fillup and tune.
So you can save $$$ by not buying premium and use 87 and more E85. Brilliant !!! I never thought about it from that angle.
They are building a new Sheetz station less than a mile from me. Hopefully it will have corn like most of the others.
Quote from: StealBlueSho on June 03, 2018, 02:09:26 PM
Stoked to see the results!! Go get em Z!
Sent from my iPhone using Tapatalk
Thank you Handsome fellow! Z :)
Quote from: Macgyver on June 03, 2018, 03:01:12 PM
Quote from: FoMoCoSHO on May 27, 2018, 05:33:01 PM
Here's a shoutout for speedway 87....the MKS has been detuned for quite a while getting things handled, new car, etc and we've been running their 87. Oar was at -.61 before I added tune and corn.
Now testing 87 + E85
Initial impressions....17 psi spikes and zero KR.
Pic was before fillup and tune.
So you can save $$$ by not buying premium and use 87 and more E85. Brilliant !!! I never thought about it from that angle.
They are building a new Sheetz station less than a mile from me. Hopefully it will have corn like most of the others.
Right now I've got 5 gal 87 in my blend and I'm sitting at about E70 with a full rail and zero knock. When I say zero, i mean zero. None at wot, no tip in/transition, nada. If the sensor wasn't adding I would think it was broke.
I find it funny how dismissive people are of my SHO compared to my old PI at the track here.
Walking out into my garage and not seeing the sho sucks..... I hope the dealer parked it inside one of the garages...
Sent from my iPhone using Tapatalk
:(
New Vid from (FTM) ON Ford 4.6L 5.4L 6.8L 2v Engines Blown Out Spark Plug Repair: Permanently Fixed in About 15 Minutes! Z
http://youtu.be/md_HQcZZEpM (http://youtu.be/md_HQcZZEpM)
Timken Co..Hubs (wheel bearings) Torque Specs & more! Z
https://www.timken.com/ (https://www.timken.com/)
http://www.showmetheparts.com/timken/ (http://www.showmetheparts.com/timken/)
(https://i.imgur.com/WIIFum2h.jpg?1)
I spotted a Brand new 18-SHO For Sale. Z
(https://i.imgur.com/yfllCJXh.jpg?1)
I will take it for 18,274 USD outthedoor. LOL.
Quote from: SHOdded on June 06, 2018, 11:34:09 AM
I will take it for 18,274 USD outthedoor. LOL.
I spoke with the Sales manager and said they currently have some good incentives @ the moment -MSRP $47,520 . Z
I thought they were reverting to 1995 pricing, after incentives. Oh well, LOL!
Quote from: ZSHO on June 06, 2018, 10:28:17 AM
I spotted a Brand new 18-SHO For Sale. Z
(https://i.imgur.com/yfllCJXh.jpg?1)
New wheel design? I do not recall seeing that one before.
It looks like there Mach Low Gloss Ebony wheels. Z
$36,390
https://www.northgatefordcincinnati.com/new/Ford/2018-Ford-Taurus-cincinnati-oh-3e108db90a0e0ae94b8a36a55ce5d045.htm (https://www.northgatefordcincinnati.com/new/Ford/2018-Ford-Taurus-cincinnati-oh-3e108db90a0e0ae94b8a36a55ce5d045.htm)
(https://uploads.tapatalk-cdn.com/20180620/161fcef8951ac51f0250519914d2dff2.heic)
Every mile on this car is one less mile on my SHO... almost 28K in close to two years... I'll take it...
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on June 20, 2018, 09:43:55 AM
(https://uploads.tapatalk-cdn.com/20180620/161fcef8951ac51f0250519914d2dff2.heic)
Every mile on this car is one less mile on my SHO... almost 28K in close to two years... I'll take it...
Sent from my iPhone using Tapatalk
That's all that motivates me to drive my DD VW Passat which I absolutely hate but at 1400 miles a week commute I'll take it. Not to mention the 30mpg hwy vs 20mpg the SHO gives me
Sent from my Moto Z (2) using Tapatalk
Luckily my DD is an employer paid for "tool" that I get to use for personal as well and is garaged at my house... they cover gas, maint, insurance, taxes, car payment, etc... they just take $150 from my paycheck a month to cover any personal mileage I use it for....
And we get a refresh every 2 years... my new 2018 Escape SE is currently being built and will be ready in a few weeks.
Not a bad deal...
Sent from my iPhone using Tapatalk
I have been driving with the engine cover off the past few days (topless) you may say and noticed a buzzing sound mainly coming from the rear bank on a cold morning startup! It does go away after the vehicle is warmed up! The A/C is OFF! Anybody have a similar condition, thanks! Z
Quote from: StealBlueSho on June 20, 2018, 11:27:11 AM
Luckily my DD is an employer paid for "tool" that I get to use for personal as well and is garaged at my house... they cover gas, maint, insurance, taxes, car payment, etc... they just take $150 from my paycheck a month to cover any personal mileage I use it for....
And we get a refresh every 2 years... my new 2018 Escape SE is currently being built and will be ready in a few weeks.
Not a bad deal...
Sent from my iPhone using Tapatalk
Oh boy, your getting the crappy 1.5. I've heard they suck.
Quote from: ZSHO on June 21, 2018, 07:58:27 AM
I have been driving with the engine cover off the past few days (topless) you may say and noticed a buzzing sound mainly coming from the rear bank on a cold morning startup! It does go away after the vehicle is warmed up! The A/C is OFF! Anybody have a similar condition, thanks! Z
My 2016 does this too.
Sent from my iPhone using Tapatalk
Quote from: bamsho on June 21, 2018, 08:00:29 AM
Quote from: StealBlueSho on June 20, 2018, 11:27:11 AM
Luckily my DD is an employer paid for "tool" that I get to use for personal as well and is garaged at my house... they cover gas, maint, insurance, taxes, car payment, etc... they just take $150 from my paycheck a month to cover any personal mileage I use it for....
And we get a refresh every 2 years... my new 2018 Escape SE is currently being built and will be ready in a few weeks.
Not a bad deal...
Sent from my iPhone using Tapatalk
Oh boy, your getting the crappy 1.5. I've heard they suck.
That's what I have now.... and yes... it's awful....I have floored it to go up hills and have had the rpms stall or go backwards...
Sent from my iPhone using Tapatalk
A fuel dampener issue perhaps?
SUV CRASH TEST RATINGS FOR 2018 MODELS
Two popular SUVs don't fare too well in strict small overlap crash test. Z :o
http://m.carcomplaints.com/news/2018/suv-crash-test-ratings-2018-models.shtml. (http://m.carcomplaints.com/news/2018/suv-crash-test-ratings-2018-models.shtml.) .
Been kinda keeping this on the low. Tomorrow I have my final interview for a new job Im looking to get. This will be the 3rd one and more formal. Almost 30 years at my current job, it's time for a change and tired of worring about a job. Print industry is dying and esp at my place. So time for a change, esp since Kris and I bought a new house. Fingers crossed guts.
Best of luck Brian.
Although I don't think you'll need it.
Sounds like you got it and are just trudging through the formalities.
Just learned this cause it just happened. If you drop an Oreo on the floor 2/3 of it is always still good. Man I love Oreo's
Dont leave clogged gutters full of water and maple seeds for a week in 90 degree heat. Smells like clinical halitosis x a million when you clean them out. :(
Quote from: bamsho on July 02, 2018, 01:54:40 PM
Been kinda keeping this on the low. Tomorrow I have my final interview for a new job Im looking to get. This will be the 3rd one and more formal. Almost 30 years at my current job, it's time for a change and tired of worring about a job. Print industry is dying and esp at my place. So time for a change, esp since Kris and I bought a new house. Fingers crossed guts.
the company will be lucky to have you as part of the team!
Quote from: shoNoff on July 02, 2018, 02:52:46 PM
Just learned this cause it just happened. If you drop an Oreo on the floor 2/3 of it is always still good. Man I love Oreo's
Mmmmmm OREOs ... LOL.
Quote from: DstryEvrytng on July 03, 2018, 08:00:29 PM
Dont leave clogged gutters full of water and maple seeds for a week in 90 degree heat. Smells like clinical halitosis x a million when you clean them out. :(
Rinse with sulfuric acid. Repeat.
Formal interview was rough. Got asked a safety question, that really caught me off guard. Other questions I thought I answered well. Couldnt get a vibe from them and HR lady was vage too. So not sure, they had other interviews to do. Should know sonething Friday.
Pre-Holiday Prep perhaps!! Truly hope they take you into consideration! Best of luck. Z
Having Advancetrac on + hard throttle turning onto a road = one really pissed off Advancetrac system.
Yeah can be a notsogood idea a BiGMaC discovered some time ago.
Yeah. Still getting used to how the car behaves with the new tune haha.
Sorry guys, but didn't get the job that I was looking to get. Not sure why, feels like a kick in the balls. Really disappointed. 🙁😔😔🙁
:( :( :( Surely a new opportunity will come along very soon. Just wasn't the right time.
@ BamSHO sorry Brian! Keep that chin up . Z
MY Random (ok not so random) thought is that this is a great group of people that genuinely help each other.
It is rather refreshing to be able to post questions and get solid answers without drama.
Hats off to everyone and especially our Admins/mods for keeping this bag of cats in line.
Meow.
Random thought of the day: I'm never buying EBC products again.
Just got done replacing the front slotted/dimpled rotors (GD version) and Yellowstuff pads. After 23,000 miles, they are junk. I didn't expect the pads to last over 25-30k, but the rotors both had a pretty deep ridge around the perimeter on both sides. I took them to have them turned, and one was just at spec and one was just out of spec. 🤬
Maybe my longevity expectations were unrealistic with this setup, but 23k seems effin' ridiculous on the rotors, which were not cheap.
Back to solid fronts and Wagner ThermoQuiet ceramic pads. Hopefully these last longer and create less dust.
Rant over.
Sent from my iPhone using Tapatalk
:o Gotta do whatcha gotta do! Raybestos does offer PI pads, maybe those would work better? As far as dusting, seal the wheel, make it easier to wash off the dust.
In defense of ebc the yellow stuff pads are only 1 step lower than race pads and are said to be useable on the track.
If longevity was a priority the redstuff are supposed to last longer and the black ultimax longer yet....
But it sucks about the rotors but if the pads worked well then I'm not surprised it ate the rotors....ive always had terrible corrosion issues with centric
It has been a week since washing my car and making an over 600 mile one way trip to LMS CAD so not quite sure which got dirtier the wheels or the exhaust Tips !!! TOL. Z
Random thought for the day. Would you rather fight 100 duck sized horses or 1 horse sized duck?
I guess I'm one Happy Camper especially after a long 1400 mile Trip last week,which there was absolutely ZERO Codes to be found!!
I also found it very interesting that the Traction control light DID NOT even Flicker(Flash) after each consecutive run considering all the new parts that were recently installed to fully resolve my long haul of Traction issues. Z :)
(http://i66.tinypic.com/2yob8r7.jpg)
Quote from: ZSHO on July 07, 2018, 01:08:42 PM
I guess I'm one Happy Camper especially after a long 1400 mile Trip last week there was absolutely ZERO Codes to be found!!
I also found it very interesting that the Traction control light DID NOT even Flicker(Flash) after each and every run considering all the new parts that were changed to fully resolve my Traction issues. Z :)
Well then, time to get her back at the track with a bit more agreeable weather!!! I'm sure she has low 12's in her...
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on July 07, 2018, 02:00:08 PM
Quote from: ZSHO on July 07, 2018, 01:08:42 PM
I guess I'm one Happy Camper especially after a long 1400 mile Trip last week there was absolutely ZERO Codes to be found!!
I also found it very interesting that the Traction control light DID NOT even Flicker(Flash) after each and every run considering all the new parts that were changed to fully resolve my Traction issues. Z :)
Well then, time to get her back at the track with a bit more agreeable weather!!! I'm sure she has low 12's in her...
Sent from my iPhone using Tapatalk
True to that! I guess you know what the Goal is and if not proven by year's end It will no longer be on my signature! Its a promise I made to myself!!! Z
:o :o :o :o
Quote from: ZSHO on July 07, 2018, 02:10:26 PM
Quote from: StealBlueSho on July 07, 2018, 02:00:08 PM
Quote from: ZSHO on July 07, 2018, 01:08:42 PM
I guess I'm one Happy Camper especially after a long 1400 mile Trip last week there was absolutely ZERO Codes to be found!!
I also found it very interesting that the Traction control light DID NOT even Flicker(Flash) after each and every run considering all the new parts that were changed to fully resolve my Traction issues. Z :)
Well then, time to get her back at the track with a bit more agreeable weather!!! I'm sure she has low 12's in her...
Sent from my iPhone using Tapatalk
True to that! I guess you know what the Goal is and if not proven by year's end It will no longer be on my signature! Its a promise I made to myself!!! Z
Oh yeah? What was the goal? And what won't be in the sig anymore?
@ AJP The elusive 11's benchmark! Z
Quote from: ZSHO on July 07, 2018, 09:54:21 PM
@ AJP The elusive 11's benchmark! Z
You would be the first LMS tuned car hit to 11's on stock turbos?
Sent from my iPhone using Tapatalk
Quote from: ZSHO on July 07, 2018, 09:54:21 PM
@ AJP The elusive 11's benchmark! Z
Ah ok but what won't be on your sig?
I saw this Today! I will probably have to order a set of new rubber for the rear! It's a bit to deep for my liking! Dunno. Z
(https://i.imgur.com/MgJ65Bsh.jpg?1)
(https://i.imgur.com/PFfwAIDh.jpg?1)
Quote from: ZSHO on July 10, 2018, 01:18:13 PM
I saw this Today! I will probably have to order a set of new rubber for the rear! It's a bit to deep for my liking! Dunno. Z
(https://i.imgur.com/MgJ65Bsh.jpg?1)
Me thinks that is carma for the signature comment.. Just sayin..
hope you can warranty it!
Quote from: SHOdded on July 10, 2018, 02:18:40 PM
hope you can warranty it!
No warranty! :( But probably the best tires hands down which served me quite well! Z :)
Sweet Deal on a Craftsman 42 piece 1/4 and 3/8-inch Drive Bit and Torx Bit Socket Wrench Set . Z
$29.99
https://m.sears.com/Craftsman-42-piece-1-4-and-3-8-inch-Drive-Bit-and-Torx-Bit-Socket-Wrench-Set/p-00999941000P
Unfortunate that starting in 2010 all the Craftsman tools started being made in China.
I'm dreading the day when one of my wrenches or socket wrenches fail... I almost feel like a welded Craftsman wrench made in the USA is still better than a Craftsman wrench made in China...
But that's me...
Sent from my iPhone using Tapatalk
Quote from: ZSHO on July 10, 2018, 04:02:08 PM
Quote from: SHOdded on July 10, 2018, 02:18:40 PM
hope you can warranty it!
No warranty! :( But probably the best tires hands down which served me quite well! Z :)
Were they the DW or DWS? How many miles on them?
Quote from: lamrith on July 11, 2018, 01:38:25 PM
Quote from: ZSHO on July 10, 2018, 04:02:08 PM
Quote from: SHOdded on July 10, 2018, 02:18:40 PM
hope you can warranty it!
No warranty! :( But probably the best tires hands down which served me quite well! Z :)
Were they the DW or DWS? How many miles on them?
IMHO the best tire i have ever owned! I did purchase the Conti DW as a Closeout item back on 10/16 with close to 18K on them IIRC!
They still have some meat on the bone. Z
https://m.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DW&partnum=445YR0ECDWXLOLD&vehicleSearch=true&fromCompare1=yes&autoMake=Ford&autoYear=2013&autoModel=Taurus&autoModClar=SHO (https://m.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DW&partnum=445YR0ECDWXLOLD&vehicleSearch=true&fromCompare1=yes&autoMake=Ford&autoYear=2013&autoModel=Taurus&autoModClar=SHO)
https://www.ecoboostperformanceforum.com/index.php/topic,6667.0.html (https://www.ecoboostperformanceforum.com/index.php/topic,6667.0.html)
Awesome Z. I had the DW on my STS-V and loved them. They are still on my short list for the SHO, but right now the Firehawk Indy 500 has them beat out on bang for the buck.
Quote from: lamrith on July 11, 2018, 02:59:31 PM
Awesome Z. I had the DW on my STS-V and loved them. They are still on my short list for the SHO, but right now the Firehawk Indy 500 has them beat out on bang for the buck.
Lets see what these bring! Z
;)
I will need to break them in as per tirerack! 500 miles period!!!!
https://m.tirerack.com/tires/tiretech/techpage.jsp?techid=5
(https://i.imgur.com/8K30vnEh.jpg)
(https://i.imgur.com/67E7Oj9h.jpg)
I just ordered one and figured let me spread the savings on to the Forum! Z
Roav By Anker, DashCam A1, Dash Cam, Dashboard Camera Recorder with Sony Exmor 323 Sensor, 1080P .Z
$55.99
https://www.amazon.com/4-Lane-Wide-Angle-G-Sensor-Recording-Charger/dp/B0742DD36K/ref=mp_s_a_1_1?ie=UTF8&qid=1532691298&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=Wide-Angle+View+Lens%2C+G-Sensor%2C+WDR%2C+Loop+Recording%2C+Night+Mode%2C+2-Port+Charger%2C+No+Wifi+or+APP&dpPl=1&dpID=41QmrBxuU7L&ref=plSrch (https://www.amazon.com/4-Lane-Wide-Angle-G-Sensor-Recording-Charger/dp/B0742DD36K/ref=mp_s_a_1_1?ie=UTF8&qid=1532691298&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=Wide-Angle+View+Lens%2C+G-Sensor%2C+WDR%2C+Loop+Recording%2C+Night+Mode%2C+2-Port+Charger%2C+No+Wifi+or+APP&dpPl=1&dpID=41QmrBxuU7L&ref=plSrch)
Newer Model can be found here.
$ 55.99
https://www.amazon.com/Roav-Dashboard-NightHawk-Wide-Angle-Recording/dp/B076GYGVY5/ref=mp_s_a_1_fkmr0_1?ie=UTF8&qid=1532691555&sr=8-1-fkmr0&pi=AC_SX236_SY340_QL65&keywords=ker%2C++Sensor%2C+1080P+FHD%2C+NightHawk+Vision%2C+Wide-Angle+View%2C+WiFi%2C+G-Sensor%2C+WDR%2C+Loop+Recording%2C+and+Night+Mode (https://www.amazon.com/Roav-Dashboard-NightHawk-Wide-Angle-Recording/dp/B076GYGVY5/ref=mp_s_a_1_fkmr0_1?ie=UTF8&qid=1532691555&sr=8-1-fkmr0&pi=AC_SX236_SY340_QL65&keywords=ker%2C++Sensor%2C+1080P+FHD%2C+NightHawk+Vision%2C+Wide-Angle+View%2C+WiFi%2C+G-Sensor%2C+WDR%2C+Loop+Recording%2C+and+Night+Mode)
Does look nice! Wonder how much power it needs to capture the G-force type events. Unless it has a battery backup, it has to be wired to an always on source?
Quote from: SHOdded on July 27, 2018, 07:52:38 AM
Does look nice! Wonder how much power it needs to capture the G-force type events. Unless it has a battery backup, it has to be wired to an always on source?
It does
not have battery or recharge capability. Z
Quote from: ZSHO on July 27, 2018, 08:11:26 AM
Quote from: SHOdded on July 27, 2018, 07:52:38 AM
Does look nice! Wonder how much power it needs to capture the G-force type events. Unless it has a battery backup, it has to be wired to an always on source?
It does not have battery or recharge capability. Z
This is one of the reasons I haven't ordered a standalone cam. I downloaded dashcam software for my tablet. It works very well and I really don't feel like removing any body panels on a brand new car to run constant 12 volt on and I always have battery power via the tablet.
So OBDLINK runs in the foreground with YAV 1 notifications overlaid.... Dashcam and Amazon Music are running in the background. This setup has stretched this Samsung tablet resources to its limits so I need something with more horsepower. If a non g force event occurs i have a 3 button sequence to protect the clip. Very handy for nailing road rage aholes. I really like this setup and I have everything i need using one device. Its also very simple to move everything between the CMAX and The Lincoln. The CMAX CD player is in the perfect spot to mount the tab using a disc slot mount. The Lincoln uses a small magic mount on the center channel that disappears when the tab is mounted. I run a 60 watt ANKER USB charger with a fast charging port to keep my phone and tab topped off and another that runs off the 120 volt inverter plug in case I have passengers with power hungry devices.
I finally had some time and made a proper gauge setup for the CMAX. OBDLINK combined with the Ford Powerflow app and gauges has helped learn how to drive the car for best MPGS and surprisingly driving like a Grandpa is not the best way.
Good info! The disadvantage with allin1 devices is lack of optimization of processing and storage. BUT if you spec them at 150%-200% of need, should get a durable setup.
Quote from: SHOdded on July 28, 2018, 10:36:40 AM
Good info! The disadvantage with allin1 devices is lack of optimization of processing and storage. BUT if you spec them at 150%-200% of need, should get a durable setup.
Honestly this tablet is a beast for the abuse I'm throwing at it. There are random intermittent dropouts which is a no go...the dashcam has to be reliable. I've been running music off USB to lessen the load till I find a new device. That stopped any hang/crash issues.
22 PLE glass coating...
Welcome back FoMoCo! I did send you a couple of Pm a while back and hope all is well. Z
New video from (FTM) on Diagnosing Hard to Find Engine Misfires With a Simple Water Test. Z :)
https://www.youtube.com/embed/cz7cUEQmlxE
Quote from: ZSHO on July 30, 2018, 11:23:48 AM
New video from (FTM) on Diagnosing Hard to Find Engine Misfires With a Simple Water Test. Z :)
https://www.youtube.com/embed/cz7cUEQmlxE
Link not working.
Works on my ipad ...
Direct link can be found here! Z
! No longer available (http://www.youtube.com/watch?v=cz7cUEQmlxE#)
(https://media1.tenor.com/images/99f5a41f38105a96469b5497fc31bda9/tenor.gif?itemid=5435897%5D%20https://media1.tenor.com/images/99f5a41f38105a96469b5497fc31bda9/tenor.gif?itemid=5435897)
Sent from my iPhone using Tapatalk
Been thinking about alcohol injection. Decided to go old school instead and just use a glass and some ice.
I think an IV drip line would be more effective in the long run. LOL.
FTM/BSG Automotive video on rear end slide while braking
https://www.youtube.com/watch?v=_0bNLIyhG1o (https://www.youtube.com/watch?v=_0bNLIyhG1o)
https://www.youtube.com/embed/_0bNLIyhG1o
I'm thinking about hitting up a wrecking yard to find another front center speaker grill so I can drill it for a small tablet mount to see boost and AFR with torque. I know my X4 will do it but I'd rather not do it that way and leave my $400 tuner in plain sight. I'd rather have my $50 tablet taken.
I just hate how slowly the pids update via bluetooth.
Quote from: Vortech347 on July 31, 2018, 05:17:18 PM
I'm thinking about hitting up a wrecking yard to find another front center speaker grill so I can drill it for a small tablet mount to see boost and AFR with torque. I know my X4 will do it but I'd rather not do it that way and leave my $400 tuner in plain sight. I'd rather have my $50 tablet taken.
I just hate how slowly the pids update via bluetooth.
I don't remember the exact lines of the SHO but I used a Scosche Mighty mount mini attached to the grill with adhesive. Use one of those 3M adhesive removal tabs between the dash and adhesive and it will come off easy when needed. I think comes with something similar as well. Or if you don't want to mess with that a little goof off would remove any residue. Mount disappears when tab is up.
If you have an MX you might consider using OBDLINK instead of Torque. IMHO it is faster as long as you don't load up on radial gauges. My current layout would be perfect for what you are wanting and you could have some digis as well.
Quote from: FoMoCoSHO on July 31, 2018, 05:41:30 PM
Quote from: Vortech347 on July 31, 2018, 05:17:18 PM
I'm thinking about hitting up a wrecking yard to find another front center speaker grill so I can drill it for a small tablet mount to see boost and AFR with torque. I know my X4 will do it but I'd rather not do it that way and leave my $400 tuner in plain sight. I'd rather have my $50 tablet taken.
I just hate how slowly the pids update via bluetooth.
I don't remember the exact lines of the SHO but I used a Scosche Mighty mount mini attached to the grill with adhesive. Use one of those 3M adhesive removal tabs between the dash and adhesive and it will come off easy when needed. I think comes with something similar as well. Or if you don't want to mess with that a little goof off would remove any residue. Mount disappears when tab is up.
If you have an MX you might consider using OBDLINK instead of Torque. IMHO it is faster as long as you don't load up on radial gauges. My current layout would be perfect for what you are wanting and you could have some digis as well.
Funny you say that, my gauges are in fact dials. So best case would be to go straight to the digital ones?
Quote from: Vortech347 on August 01, 2018, 03:20:57 PM
Quote from: FoMoCoSHO on July 31, 2018, 05:41:30 PM
Quote from: Vortech347 on July 31, 2018, 05:17:18 PM
I'm thinking about hitting up a wrecking yard to find another front center speaker grill so I can drill it for a small tablet mount to see boost and AFR with torque. I know my X4 will do it but I'd rather not do it that way and leave my $400 tuner in plain sight. I'd rather have my $50 tablet taken.
I just hate how slowly the pids update via bluetooth.
I don't remember the exact lines of the SHO but I used a Scosche Mighty mount mini attached to the grill with adhesive. Use one of those 3M adhesive removal tabs between the dash and adhesive and it will come off easy when needed. I think comes with something similar as well. Or if you don't want to mess with that a little goof off would remove any residue. Mount disappears when tab is up.
If you have an MX you might consider using OBDLINK instead of Torque. IMHO it is faster as long as you don't load up on radial gauges. My current layout would be perfect for what you are wanting and you could have some digis as well.
Funny you say that, my gauges are in fact dials. So best case would be to go straight to the digital ones?
This is my current obdlink setup. It would take about 5 seconds to change to AFR and boost on the radials. Well, if I had boost, lol.
Quote from: Vortech347 on August 01, 2018, 03:20:57 PM
Quote from: FoMoCoSHO on July 31, 2018, 05:41:30 PM
Quote from: Vortech347 on July 31, 2018, 05:17:18 PM
I'm thinking about hitting up a wrecking yard to find another front center speaker grill so I can drill it for a small tablet mount to see boost and AFR with torque. I know my X4 will do it but I'd rather not do it that way and leave my $400 tuner in plain sight. I'd rather have my $50 tablet taken.
I just hate how slowly the pids update via bluetooth.
I don't remember the exact lines of the SHO but I used a Scosche Mighty mount mini attached to the grill with adhesive. Use one of those 3M adhesive removal tabs between the dash and adhesive and it will come off easy when needed. I think comes with something similar as well. Or if you don't want to mess with that a little goof off would remove any residue. Mount disappears when tab is up.
If you have an MX you might consider using OBDLINK instead of Torque. IMHO it is faster as long as you don't load up on radial gauges. My current layout would be perfect for what you are wanting and you could have some digis as well.
Funny you say that, my gauges are in fact dials. So best case would be to go straight to the digital ones?
I whipped something up based off my cmax layout using MKS pids
Edit....added dark mode
Going on two years soon with our new president and the left still can't accept we have somebody other than a Dem in office.
We haven't seen the Democrats this upset since the Republicans freed the slaves! The left needs to get over it like we had to accept Obama and his policies for 8 years.
Quote from: griggs95 on August 02, 2018, 12:51:29 PM
Going on two years soon with our new president and the left still can't accept we have somebody other than a Dem in office.
We haven't seen the Democrats this upset since the Republicans freed the slaves! The left needs to get over it like we had to accept Obama and his policies for 8 years.
Never Never want to talk Politics in today's Climate,
MY QUESTION: why does it rain Here Every Wed
so that it Cancels the Test and Tune, Give me a break already
Quote from: irondoor19 on August 02, 2018, 12:56:01 PM
Quote from: griggs95 on August 02, 2018, 12:51:29 PM
Going on two years soon with our new president and the left still can't accept we have somebody other than a Dem in office.
We haven't seen the Democrats this upset since the Republicans freed the slaves! The left needs to get over it like we had to accept Obama and his policies for 8 years.
Never Never want to talk Politics in today's Climate,
MY QUESTION: why does it rain Here Every Wed
so that it Cancels the Test and Tune, Give me a break already
Scary statement right there. When you can't talk about the ONE thing that really matters in this country, (politics) that is absolutely frightening. That is loss of freedom of speech and that is everything.
As far as raining every Wednesday? I feel your pain buddy but hold tight til' next Wednesday.
No the reason i don't, IS i do not have time for DA's
I and we and the rest of the hard working People out there
Know what is up, and look at the market, I love capitalist Forward Motion
While we respect the right to individual opinions, this is a car forum first and foremost :) Politics is one of the most inflammatory subjects there is, so it is best left to forums devoted to such discussions. Appreciate the understanding and cooperation.
The new track record discussion has its own topic now and can be found here:
https://www.ecoboostperformanceforum.com/index.php/topic,9353.0.html (https://www.ecoboostperformanceforum.com/index.php/topic,9353.0.html)
I had this minor pulsating vibration when stopping @ all speeds which could be felt on the steering wheel which was annoying and after having the wheels balanced with road force balancing it did not remedy my symptoms..........
I installed new tires a couple weeks ago to later find out one of the previous tires were cupped which caused this condition and now the vehicle stops as smoooooth as silk!!! Check your tires before spending $$$ on new brakes or throwing parts that you don't need! Some food for thought! Z :)
Wow its that time of Year Again: Mopar Nationals In Columbus Ohio,
AND at the minimum, Watching the Burnout Contest on Brice Road @ 70...
Wish I could Get in to Trails and Drag Some Mopar Butt...
http://www.moparnats.org/ (http://www.moparnats.org/)
New Video from (FTM) on Trans related issues on the Ford F-150. Z :)
https://youtu.be/YXIpvjfmumg (https://youtu.be/YXIpvjfmumg)
The Ford dealer just sent me a friendly reminder
that your 5yr/100K warranty on your 2013 Ford Taurus SHO may be expiring soon.
It's kind of hard to believe it has been almost 5 years since purchasing the SHO brand spanking new with 2 miles on the OD back on 8/13!!
I guess will have to do some extensive research on an extended service plan (ESP) warranty in the days to come,especially with the turbos & all!
I will keep you updated soon! Thanks Z :-\
Quote from: ZSHO on August 10, 2018, 10:19:44 AM
The Ford dealer just sent me a friendly reminder
that your 5yr/100K warranty on your 2013 Ford Taurus SHO may be expiring soon.
It's kind of hard to believe it has been almost 5 years since purchasing the SHO brand spanking new with 2 miles on the OD back on 8/13!!
I guess will have to do some extensive research on an extended service plan (ESP) warranty in the days to come,especially with the turbos & all!
I will keep you updated soon! Thanks Z :-\
Make sure you buy it before it runs out, or they jack the price WAY up!
I just picked up a Craftsman 2.5 gal. Corded Wet/Dry Vacuum 1.75 hp @ my local Ace hardware for a sweet deal of $19.99.
I figured I'll pass on the savings. Z :)
https://www.acehardware.com/departments/tools/wet-dry-vacuums/wetdry-vacuums/2305696 (https://www.acehardware.com/departments/tools/wet-dry-vacuums/wetdry-vacuums/2305696)
Nice grab!
Quote from: SHOdded on August 10, 2018, 04:16:22 PM
Nice grab!
Thanks Manu! It looks that Amazon has it listed for $43.99! SMH. Z
https://www.amazon.com/Craftsman-9-17611-Wet-Vacuum-gallon/dp/B007C6KRS0/ref=sr_1_fkmr0_1?ie=UTF8&qid=1533931487&sr=8-1-fkmr0&keywords=Craftsman+2.5+gal.++vacuum+09176 (https://www.amazon.com/Craftsman-9-17611-Wet-Vacuum-gallon/dp/B007C6KRS0/ref=sr_1_fkmr0_1?ie=UTF8&qid=1533931487&sr=8-1-fkmr0&keywords=Craftsman+2.5+gal.++vacuum+09176)
Def pays to shop around.
Quote from: ZSHO on August 10, 2018, 01:48:15 PM
I just picked up a Craftsman 2.5 gal. Corded Wet/Dry Vacuum 1.75 hp @ my local Ace hardware for a sweet deal of $19.99.
I figured I'll pass on the savings. Z :)
https://www.acehardware.com/departments/tools/wet-dry-vacuums/wetdry-vacuums/2305696 (https://www.acehardware.com/departments/tools/wet-dry-vacuums/wetdry-vacuums/2305696)
What can you Get for 21 bucks, Not Much, thanks again
Quote from: irondoor19 on August 11, 2018, 01:34:48 PM
Quote from: ZSHO on August 10, 2018, 01:48:15 PM
I just picked up a Craftsman 2.5 gal. Corded Wet/Dry Vacuum 1.75 hp @ my local Ace hardware for a sweet deal of $19.99.
I figured I'll pass on the savings. Z :)
https://www.acehardware.com/departments/tools/wet-dry-vacuums/wetdry-vacuums/2305696 (https://www.acehardware.com/departments/tools/wet-dry-vacuums/wetdry-vacuums/2305696)
What can you Get for 21 bucks, Not Much, thanks again
NP Bud! enjoy. Z :)
Has anyone tried changing your water to coolant ratio since Optimal Coolant Ratio Depends on Your Climate for added benefits....
FWIW I was thinking of a 70/30 water-to-anti-freeze mixture and prior to winter switching back to 40-60.
Here's a good article below.....
Since the lowest freezing point is achieved at a 40/60 water-to-anti-freeze ratio, there's no added benefit to using more anti-freeze. Therefore, if you live in an area that will never see less than 26°F, your car's performance will most likely be optimal at a 90/10 ratio year round.
If you live in an area that can see temperatures as low as -10°F in the winter, but can also get to 95°F in the summer, then you're better off running a 60/40 ratio. However, if you're one that may get stuck in traffic with the air conditioner on during the summer months, you may want to make the switch to a 90/10 ratio until winter hits again to get the most out of your car year round.
Make sure to read your vehicle's owner's manual to find the coolant system's capacity so that you can figure out how much anti-freeze to add!
https://www.ngk.com/learning-center/article/653/quest-for-the-ideal-coolant-ratio (https://www.ngk.com/learning-center/article/653/quest-for-the-ideal-coolant-ratio)
Definitely thinking of going 90/10 out here in this Sunny SoCal weather
Only thing with that high you may start to see rust
Quote from: NITSOOB on August 15, 2018, 06:55:26 PM
Definitely thinking of going 90/10 out here in this Sunny SoCal weather
Sent from my Pixel 2 XL using Tapatalk
Just got this in my newsfeed
http://www.underhoodservice.com/ford-3-5l-ecoboost-common-problems/
Sent from my Pixel 2 XL using Tapatalk
Quote from: Gjkrisa on August 18, 2018, 01:58:42 AM
Just got this in my newsfeed
http://www.underhoodservice.com/ford-3-5l-ecoboost-common-problems/ (http://www.underhoodservice.com/ford-3-5l-ecoboost-common-problems/)
Sent from my Pixel 2 XL using Tapatalk
Its funny they mention a solution they found online it to drill a 1/16"hole in your CAC (Intercooler). THIS PROCEDURE CAN CREATE A LEAK IN THE SYSTEM!! HA! Z
Quote from: ZSHO on August 18, 2018, 07:06:26 AM
Quote from: Gjkrisa on August 18, 2018, 01:58:42 AM
Just got this in my newsfeed
http://www.underhoodservice.com/ford-3-5l-ecoboost-common-problems/ (http://www.underhoodservice.com/ford-3-5l-ecoboost-common-problems/)
Sent from my Pixel 2 XL using Tapatalk
Its funny they mention a solution they found online it to drill a 1/16"hole in your CAC (Intercooler). THIS PROCEDURE CAN CREATE A LEAK IN THE SYSTEM!! HA! Z
Yup! But it don't try to argue that point with the F150 crowd... they get all pissy!
Sent from my iPhone using Tapatalk
Its a feature not a bug.
Quote from: StealBlueSho on August 18, 2018, 08:47:23 AM
Quote from: ZSHO on August 18, 2018, 07:06:26 AM
Quote from: Gjkrisa on August 18, 2018, 01:58:42 AM
Just got this in my newsfeed
http://www.underhoodservice.com/ford-3-5l-ecoboost-common-problems/ (http://www.underhoodservice.com/ford-3-5l-ecoboost-common-problems/)
Sent from my Pixel 2 XL using Tapatalk
Its funny they mention a solution they found online it to drill a 1/16"hole in your CAC (Intercooler). THIS PROCEDURE CAN CREATE A LEAK IN THE SYSTEM!! HA! Z
Yup! But it don't try to argue that point with the F150 crowd... they get all pissy!
Sent from my iPhone using Tapatalk
Its simply
not supported on this Forum! Z
For anyone dealing with stuck boots when changing plugs, a bit of PBblaster or wd40 can help in removing them.
Quote from: SHOdded on August 18, 2018, 12:46:24 PM
For anyone dealing with stuck boots when changing plugs, a bit of PBblaster or wd40 can help in removing them.
Huh.... good to know..
Sent from my iPhone using Tapatalk
I will need to revert back to stock Tune plus having No Meth for a few days is going to be a tough task in order to get the I/M in Readiness state for my annual emission testing. Z
Quote from: ZSHO on August 19, 2018, 07:08:29 AM
I will need to revert back to stock Tune plus having No Meth for a few days is going to be a tough task in order to get the I/M in Readiness state for my annual emission testing. Z
Glad I don't have emissions where I live... although my current SHO would pass just fine...
Good luck, and just enjoy the nice smooth ride of a neutered SHO...
Sent from my iPhone using Tapatalk
Z, I am bawling my eyes out for you right now ... Big Red, sleep well ... Sniff!
How the heck does one drive a SHO in stock Tune!
One must appreciate the overall performance while being Tuned & all! Z
Quote from: ZSHO on August 19, 2018, 09:53:06 AM
How the heck does one drive a SHO in stock Tune!
I just completed a weeklong vacation to Estes Park, Colorado in the family truckster on the stock tune, in order to save money on gas. Actually, it was the stock tune, with P0420 & P0430 disabled, because of my Livernois downpipes. Over 46 1/2 hours and 2433 miles of driving, I averaged 22.8 mpg.
Road Trip Notes:
1. 80 mph speed limits in South Dakota are pretty awesome.
2. Judging by the number of bikers we encountered, Sturgis is an even bigger deal than I thought, and I knew it was big.
3. Mistake one small calf for a goat, and you'll never hear the end of it. I swear it was a Black Angus goat.
4. Hadn't been to Mount Rushmore since I was a kid, and it's pretty darn impressive. It should be on everyone's bucket list.
5. How does "The Chain" not make it on Fleetwood Mac's Greatest Hits album? Also, my 6 year old son likes Fleetwood Mac. Good kid.
6. I saw a campaign sign in Wyoming for some guy running for coroner. Huh.
7. It's always cool to see animals that are not native to where you live. During the trip we saw buffalo, elk, pronghorn/antelope, burros and prairie dogs. I would have liked to see bighorn sheep and moose, but we did not.
8. The Rocky Mountains are really beautiful. I wish I had thought to bring a GoPro to record some of the mountain drives. Some of the drives are a little nerve-racking for a middle-aged guy with a heart condition, though.
9. Gas out West sucks. 85 octane, WTF?
10. Wyoming appear to be not much besides a bunch of cattle ranches and a few oil rigs.
11. Driving beats flying hands down.
The Sturgis bike rally is a very big deal around here. Also, the gas does suck haha.
Quote from: hawkeye93 on August 19, 2018, 11:41:25 AM
Quote from: ZSHO on August 19, 2018, 09:53:06 AM
How the heck does one drive a SHO in stock Tune!
I just completed a weeklong vacation to Estes Park, Colorado in the family truckster on the stock tune, in order to save money on gas. Actually, it was the stock tune, with P0420 & P0430 disabled, because of my Livernois downpipes. Over 46 1/2 hours and 2433 miles of driving, I averaged 22.8 mpg.
Road Trip Notes:
1. 80 mph speed limits in South Dakota are pretty awesome.
2. Judging by the number of bikers we encountered, Sturgis is an even bigger deal than I thought, and I knew it was big.
3. Mistake one small calf for a goat, and you'll never hear the end of it. I swear it was a Black Angus goat.
4. Hadn't been to Mount Rushmore since I was a kid, and it's pretty darn impressive. It should be on everyone's bucket list.
5. How does "The Chain" not make it on Fleetwood Mac's Greatest Hits album? Also, my 6 year old son likes Fleetwood Mac. Good kid.
6. I saw a campaign sign in Wyoming for some guy running for coroner. Huh.
7. It's always cool to see animals that are not native to where you live. During the trip we saw buffalo, elk, pronghorn/antelope, burros and prairie dogs. I would have liked to see bighorn sheep and moose, but we did not.
8. The Rocky Mountains are really beautiful. I wish I had thought to bring a GoPro to record some of the mountain drives. Some of the drives are a little nerve-racking for a middle-aged guy with a heart condition, though.
9. Gas out West sucks. 85 octane, WTF?
10. Wyoming appear to be not much besides a bunch of cattle ranches and a few oil rigs.
11. Driving beats flying hands down.
It sounds like you had a cool time! I took several trips to FL with the SHO and a few trips to Pure MI which was cool,but fortunately never encountered bad crappie gas & 93 octane fuel was readily available. .
I have to agree its nice driving down there but had some close calls with deers,which always try to take the extra necessary precautions @ deer zones @ night. Z
Yes, we had a very enjoyable time. My wife loves the mountains; she went horseback riding there a few years ago. My favorite part was driving through the canyons, with winding roads along the river. Very cool.
Its that time of year again with winter-blend fuel just around the corner. Z
https://www.kiplinger.com/article/business/T019-C000-S010-energy-price-forecast.html (https://www.kiplinger.com/article/business/T019-C000-S010-energy-price-forecast.html)
https://www.google.com/amp/s/www.goldeagle.com/tips-tools/what-is-the-difference-between-winter-summer-fuels/amp/ (https://www.google.com/amp/s/www.goldeagle.com/tips-tools/what-is-the-difference-between-winter-summer-fuels/amp/)
New video from (FTM) on the F-150 Trans. Z
https://youtu.be/Ikk56cIHL_g (https://youtu.be/Ikk56cIHL_g)
I captured this roughly 100ft away from me this morning! Z :o
https://www.youtube.com/embed/xKeuI07DfEA
:o Hope noone was hurt!
Quote from: SHOdded on August 20, 2018, 04:14:33 PM
:o Hope noone was hurt!
Yeah luckily people were left unscathed from the incident. Z
Knocked out my AWS Certified Solution Architect Associates exam out today....
Wanted to celebrate by doing donuts... unfortunately I had to settle with conservative spirited driving... sometime AWD sucks...
Sent from my iPhone using Tapatalk
LOL LOL LOL. Congrats on the certification anyway. Helps cover that bald spot on the wall ;)
MSD Ignition Direct Replacement Ignition Coil Packs 825763 FREE SHIPPING
Best price thus far! Z
$238.58
https://hebronautoparts.com/i-27182523-msd-ignition-ford-ecoboost-coil-82576.html (https://hebronautoparts.com/i-27182523-msd-ignition-ford-ecoboost-coil-82576.html)
I reverted back to stock Tune today and made sure the radio - A/C - etc was set to OFF!
I also made certain that the (rain sensor) & (courtesy wipe) feature was set to OFF prior to reflash.. ..
FWIW the wipers did NOT Flinch during the procces and quess you learn something new everyday . Z :)
cant wait till emissions are done & over with!
Brand new video from (FTM) on NEVER FOLLOW Fords recommended maintenance intervals! OH SO TRUE! Z
https://youtu.be/pYDjVYT51Jg (https://youtu.be/pYDjVYT51Jg)
Quote from: SHOdded on August 26, 2018, 12:31:12 AM
cant wait till emissions are done & over with!
Thanks Manu! :) It sometimes takes a few driving cycles to complete the I/M Readiness state! I guess all in due time. Z
I wanted to change my PTU Fluid/Flush since having 61K for a peace of mind.
The last time it was changed @ roughly 30K!
I spoke with the Service manager @ ford and said it was a big job on your SHO! I was quoted 4.5 hr labor which included the PTU Flush & seal plus using my own fluids for a grand total of $661.00 !!! :o
I told him kindly its NO more than a 2 hr job and No thank you...
I guess I will have to tackle this myself! Z
Quote from: ZSHO on August 28, 2018, 07:51:16 AM
I wanted to change my PTU Fluid/Flush since having 61K for a peace of mind.
The last time it was changed @ roughly 30K!
I spoke with the Service manager @ ford and said it was a big job on your SHO! I was quoted 4.5 hr labor which included the PTU Flush & seal plus using my own fluids for a grand total of $661.00 !!! :o
I told him kindly its NO more than a 2 hr job and No thank you...
I guess I will have to tackle this myself! Z
It's just money! LoL... (inserted snarky remark)
Sent from my iPhone using Tapatalk
Quote from: ZSHO on August 28, 2018, 07:51:16 AM
I wanted to change my PTU Fluid/Flush since having 61K for a peace of mind.
The last time it was changed @ roughly 30K!
I spoke with the Service manager @ ford and said it was a big job on your SHO! I was quoted 4.5 hr labor which included the PTU Flush & seal plus using my own fluids for a grand total of $661.00 !!! :o
I told him kindly its NO more than a 2 hr job and No thank you...
I guess I will have to tackle this myself! Z
It's MUCH easier on a lift, honestly in my case with no cats, hardest part was working around hot parts and trying to get enough fluid out. I'm very seriously considering the tap/plug on the bottom. Risky, but will make the process cake.
Another instance of a dealership not wanting to do a job and quoting a price sure to accomplish exactly that.
Quote from: SHOdded on August 28, 2018, 08:42:49 AM
Another instance of a dealership not wanting to do a job and quoting a price sure to accomplish exactly that.
Happens ALL the time... in every industry.
Sent from my iPhone using Tapatalk
Quote from: ToMang07 on August 28, 2018, 08:10:37 AM
Quote from: ZSHO on August 28, 2018, 07:51:16 AM
I wanted to change my PTU Fluid/Flush since having 61K for a peace of mind.
The last time it was changed @ roughly 30K!
I spoke with the Service manager @ ford and said it was a big job on your SHO! I was quoted 4.5 hr labor which included the PTU Flush & seal plus using my own fluids for a grand total of $661.00 !!! :o
I told him kindly its NO more than a 2 hr job and No thank you...
I guess I will have to tackle this myself! Z
It's MUCH easier on a lift, honestly in my case with no cats, hardest part was working around hot parts and trying to get enough fluid out. I'm very seriously considering the tap/plug on the bottom. Risky, but will make the process cake.
After we have done this a Few times, It IS easy, But a lift is a MUST, Otherwise,
you Need to Get Her Way up in the Air... IF you are Going to attempt it, You can
Message me, IF you have any additional Questions...
I am Stoked to finally get some good news on my annual emissions testing here in N.Y.....
@ roughly 38 miles had all the monitors ready & complete with the exception of the EVAP which took a little longer as expected with a Total of 60 miles to fully complete the driving cycles and couldn't wait to load the
LMS METH TUNE! :drive:
I used Torque-pro and worked as designed. Z
(https://i.imgur.com/C1AuUXAh.jpg)
(https://i.imgur.com/TW87xsfh.jpg)
(https://i.imgur.com/w32FAE0h.jpg?1)
Sweet! Back in action, asserting mastery over the streets of New York :D
Quote from: SHOdded on August 28, 2018, 07:11:01 PM
Sweet! Back in action, asserting mastery over the streets of New York :D
Thank you kind sir! :) I guess with all the MODS & all you sometimes worry! This was my 4th year passing with PPE DP & :bigthanx: to Mike.B from www.ecopowerparts.com (http://www.ecopowerparts.com) . Z :)
Exchanged the company take home vehicle for the new one.... not too bad... 1.5L Ecoturd...
(https://uploads.tapatalk-cdn.com/20180830/1aa84d0a43ea05a3a5376373c9182cb7.jpg)
Sent from my iPhone using Tapatalk
Awwww, it's so CUTE! LOL ...
Quote from: SHOdded on August 30, 2018, 06:27:45 PM
Awwww, it's so CUTE! LOL ...
Love you too Manu..... but the last one had 30300 miles on it... miles I got to keep off the SHO.
Sent from my iPhone using Tapatalk
The things we do for the things we love :D
Free Sirius xm Travel link now through Labor day weekend,enjoy! Z :)
Sorry I've been a stranger here, but its been a busy summer here. First we moved into a new home out in the country. We are in the woods some and second week in, we had a visitor from a black bear. Umm yeah. So little adjustment to taking put garbage was in order. Then towards the end of July we delt with heavy rains which lead to our bridge, yard and driveway being partially washed out. My parents came thru big time and helped repair it, then to be hit again couple days later with a flash flood. Yeah, UGH!!! So we fixed the driveway again. So in the middle of all that, I left my job of 29.5 years on 3rd shift to an 1st shift job. I now work for Weir gas/oil service center. We rebuilt frack pumps and recertify iron hard pipes and swivels. So yeah its been an interesting summer here.
Quote from: bamsho on September 02, 2018, 07:11:43 PM
Sorry I've been a stranger here, but its been a busy summer here. First we moved into a new home out in the country. We are in the woods some and second week in, we had a visitor from a black bear. Umm yeah. So little adjustment to taking put garbage was in order. Then towards the end of July we delt with heavy rains which lead to our bridge, yard and driveway being partially washed out. My parents came thru big time and helped repair it, then to be hit again couple days later with a flash flood. Yeah, UGH!!! So we fixed the driveway again. So in the middle of all that, I left my job of 29.5 years on 3rd shift to an 1st shift job. I now work for Weir gas/oil service center. We rebuilt frack pumps and recertify iron hard pipes and swivels. So yeah its been an interesting summer here.
Sorry to hear Brian! I hope things look up sooner than later. Z
Wow, the moving part wasn't bad enough, you had to be pushed to build Noah's Ark! You & yours are sturdy folk, Brian, if anyone can get through this .. Like Z said, hope this is the bottoming out and the rise to the top has begun. Good luck at your new job, must be a difficult adjustment, but breaking out of the mold is always a good thing :)
New Video from (FTM) on High volume & pressure. Z :)
https://youtu.be/Pfzi2-id5cY (https://youtu.be/Pfzi2-id5cY)
FYI - If anyone is having trouble to login,simply login from the HOME PAGE under LOGIN highlighted in RED below! TIA. Z
Current SMF 2.0.14 | SMF - 2017
(http://i64.tinypic.com/x4j9y8.jpg) (http://i64.tinypic.com/28s7sid.jpg)
Quote from: ZSHO on September 07, 2018, 12:57:54 PM
FYI - If anyone is having trouble to login,simply login from the HOME PAGE under LOGIN highlighted in RED below! TIA. Z
(http://i64.tinypic.com/x4j9y8.jpg) (http://i64.tinypic.com/28s7sid.jpg)
Thanks Z! I thought I got booted haha
I've been having problems too.
SHOdded has been very helpful as usual.
1st it was the Tapatalk app which pushed through an update the other day (version 8.0.3) which screwed things up.
Found out I couldn't login from a laptop via the main page (still can't) as of this post.
Then Tapatalk pushed through yet another update just this morning (version 8.0.4) which seems to have fixed the errors with previous release.
Hopefully the main page logging in can be resolved soon to as well. Fingers crossed.
Sent from my SM-N950U using Tapatalk
Check this out! Awd armored srt charger
https://www.motorauthority.com/news/1118631_police-can-now-buy-an-armored-awd-dodge-charger-srt-hellcat
Sent from my Pixel 2 XL using Tapatalk
That was a cute Focus ST... hope he enjoyed riding my ass down 29... decided to punch it and he couldn't keep up... at the next light wouldn't look at me and didn't even try when it turned green...
Sent from my iPhone using Tapatalk
AWD Hellcat Charger?
Yes please
Quote from: dubcitySHO on September 09, 2018, 10:26:40 AM
AWD Hellcat Charger?
Yes please
Don't make me trade in my SHO...
Sent from my iPhone using Tapatalk
https://www.google.com/amp/s/www.motor1.com/news/265141/dodge-charger-hellcat-police-car/amp/
Sooo that's pretty badass... and I'm not a Dodge guy...
Sent from my iPhone using Tapatalk
Yeah pretty cool but I like my tax returns and lately they seem to be getting smaller and smaller..can't figure out why my budget gets more restricted while governments' do not?
Quote from: AJP turbo on September 09, 2018, 06:07:06 PM
Yeah pretty cool but I like my tax returns and lately they seem to be getting smaller and smaller..can't figure out why my budget gets more restricted while governments' do not?
Have more kids, buy an over priced house, and tell your wife to quit working... lots of tax deductions to have!
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on September 09, 2018, 06:12:24 PM
Quote from: AJP turbo on September 09, 2018, 06:07:06 PM
Yeah pretty cool but I like my tax returns and lately they seem to be getting smaller and smaller..can't figure out why my budget gets more restricted while governments' do not?
Have more kids, buy an over priced house, and tell your wife to quit working... lots of tax deductions to have!
Sent from my iPhone using Tapatalk
Zactly
Due stay safe everyone during this Hurricane approaching the South east! Z
(https://i.imgur.com/FHqVUyS.gif)
Fun times with whirlygigs ahead! X2^^^
LOL. Too funny !!!
Quote from: AJP turbo on September 09, 2018, 06:07:06 PM
Yeah pretty cool but I like my tax returns and lately they seem to be getting smaller and smaller..can't figure out why my budget gets more restricted while governments' do not?
If you really wanna be pissed off research the Comprehensive Annual Financial Report (CAFR) of your favorite town/state.
Quote from: FoMoCoSHO on September 12, 2018, 03:14:27 PM
Quote from: AJP turbo on September 09, 2018, 06:07:06 PM
Yeah pretty cool but I like my tax returns and lately they seem to be getting smaller and smaller..can't figure out why my budget gets more restricted while governments' do not?
If you really wanna be pissed off research the Comprehensive Annual Financial Report (CAFR) of your favorite town/state.
Why do that to yourself...
Sent from my iPhone using Tapatalk
Ya, way better to just punch yourself a new hole in the head.
Quote from: StealBlueSho on September 12, 2018, 03:24:12 PM
Quote from: FoMoCoSHO on September 12, 2018, 03:14:27 PM
Quote from: AJP turbo on September 09, 2018, 06:07:06 PM
Yeah pretty cool but I like my tax returns and lately they seem to be getting smaller and smaller..can't figure out why my budget gets more restricted while governments' do not?
If you really wanna be pissed off research the Comprehensive Annual Financial Report (CAFR) of your favorite town/state.
Why do that to yourself...
Sent from my iPhone using Tapatalk
Know thy enemy....
I will need to loose some weight soon! I figured to loose the cargo organizer which is roughly 20 lbs or more! Z
(https://i.imgur.com/m36rt3yh.jpg)
Quote from: ZSHO on September 12, 2018, 07:51:37 PM
I will need to loose some weight soon! I figured to loose the cargo organizer which is roughly 20 lbs or more! Z
(https://i.imgur.com/m36rt3yh.jpg)
Keep it and go for World's Fastest Cargo Organizer!!!
Just a rant....
My neighbors son purchased a bugeye WRX.... it has been modded.... along with an extremely load fart can...he drives through the neighborhood like a jackass... he revs is up every time he passes my house so I get to hear his BOV and exhaust popping all day long since he doesn't work.... and he gives me the stink eye....
I was getting ice cream for the Misses a couple nights ago... on the way home I see his ass driving and we meet up at a red light and I'm in my SHO... he looks over... I figured with all his stink eyes and reving he would actually step up... NOPE... won't run me....
I did ask him on Facebook if he wanted to see what he could do at a racetrack... meet up and have some fun... maybe settle him down a bit... NOPE....
For the record he is 19...
End rant...
Sent from my iPhone using Tapatalk
If it is the true bug eye, that glass built transmission wont last the winter.. that WILL quiet him down.
Just use a broomstick to shove one of those tailpipe whistles way down inside his exhaust pipe.
https://youtu.be/kiEMa_oWXz0
Sent from my SM-G955U using Tapatalk
Quote from: StealBlueSho on September 12, 2018, 08:05:09 PM
Just a rant....
My neighbors son purchased a bugeye WRX.... it has been modded.... along with an extremely load fart can...he drives through the neighborhood like a jackass... he revs is up every time he passes my house so I get to hear his BOV and exhaust popping all day long since he doesn't work.... and he gives me the stink eye....
I was getting ice cream for the Misses a couple nights ago... on the way home I see his ass driving and we meet up at a red light and I'm in my SHO... he looks over... I figured with all his stink eyes and reving he would actually step up... NOPE... won't run me....
I did ask him on Facebook if he wanted to see what he could do at a racetrack... meet up and have some fun... maybe settle him down a bit... NOPE....
For the record he is 19...
End rant...
Sent from my iPhone using Tapatalk
Doesnt work but buys a car ?
Quote from: Macgyver on September 13, 2018, 02:12:19 PM
Quote from: StealBlueSho on September 12, 2018, 08:05:09 PM
Just a rant....
My neighbors son purchased a bugeye WRX.... it has been modded.... along with an extremely load fart can...he drives through the neighborhood like a jackass... he revs is up every time he passes my house so I get to hear his BOV and exhaust popping all day long since he doesn't work.... and he gives me the stink eye....
I was getting ice cream for the Misses a couple nights ago... on the way home I see his ass driving and we meet up at a red light and I'm in my SHO... he looks over... I figured with all his stink eyes and reving he would actually step up... NOPE... won't run me....
I did ask him on Facebook if he wanted to see what he could do at a racetrack... meet up and have some fun... maybe settle him down a bit... NOPE....
For the record he is 19...
End rant...
Sent from my iPhone using Tapatalk
Doesnt work but buys a car ?
He got some money from the National Guard I believe and his dad paid for half. Could be wrong, but yea... not sure how that happened to begin with.
Sent from my iPhone using Tapatalk
I was curious if anyone noticed there MPG Decrease in the last week or so!!!
I'm thinking maybe winter-blend gasoline is upon us!!! Dunno! Z :hmmm:
I think you are right! Although I am currently running a bottle of Techron CP through the tank and mpg usually goes down a good bit during that time ...
That why Ethanol is awesome... not for the MPG of course...
Sent from my iPhone using Tapatalk
I was speaking with SHOdded personally on adding a couple of new sections on Forum board! Stay tuned. Z :)
Suspensefull! Need 🍿
Quote from: 802SHO on September 15, 2018, 09:44:13 PM
Suspensefull! Need 🍿
Need to get a bigger bucket! Lol. Z :D
:popcornandbeer
Quote from: ZSHO on September 13, 2018, 06:02:07 PM
I was curious if anyone noticed there MPG Decrease in the last week or so!!!
I'm thinking maybe winter-blend gasoline is upon us!!! Dunno! Z :hmmm:
I actually just recorded my best-ever MPG this tank.... 21.7 MPG! Previous best was 21.4 but that was all interstate driving.
(I'm attributing this to the consistently cooler temps, not fuel quality.)
I noticed after a couple hundred miles of highway driving I'm back up to 18.1 mpg for the time being!
I initially found it odd that in matter of a few days it dropped from 16.8 to 16.0 with mostly city driving which was a bit odd !
The SHO runs better and stronger than ever with absolutely ZERO Codes. Z
When you have two Ecoboost powered vehicles.... you set priorities...
(https://uploads.tapatalk-cdn.com/20180917/2f3b9e64559a2daf0ea387263e4dc6dc.jpg)
Sent from my iPhone using Tapatalk
Has anyone tried the NGK 97177 LTR6CI-8 Laser Iridium Plug! Z
Laser Welded Tips
Trivalent Metal Plating
Longest Life Available
Gap: .031" (0.8mm)
Center Electrode
Material: Iridium
Type: Fine Wire
Size: 0.6mm
Projection: Projected
Ground Electrode
Material: Platinum
Type: Standard
Quantity: 1
Specifications
Warranty: 1 Year
Torque Specs: Cast Iron: 10.8-18 lb. ft. Aluminum: 7.2-14.5 lb. ft.
Brand: NGK
Heat Range: 6
Longevity: 100k Miles
https://www.ngk.com/product.aspx?zpid=40565 (https://www.ngk.com/product.aspx?zpid=40565)
It looks like www.rockauto.com (http://www.rockauto.com) has the best price of $8.27 - ea
https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,ignition,spark+plug,7212 (https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,ignition,spark+plug,7212)
https://www.rockauto.com/en/moreinfo.php?pk=6572356&cc=1503823&jsn=471 (https://www.rockauto.com/en/moreinfo.php?pk=6572356&cc=1503823&jsn=471)
I came across this Bulletin from NGK ! Z
https://drive.google.com/file/d/1ICexOws0fQXxAu7O9vPDRBrGWKEj4sj6/view?usp=drivesdk
If anyone is in the NY-NJ Mertro area and need an extra Key Fob with NO Dealer visit required! LMK. Z
Here are some
Pics of my workshop including my collection of
map sensors Lol.
There are also some tools which were left behind by my father before he passed away! may he RIP. Z
(https://i.imgur.com/H1bBdY2h.jpg?1)
(https://i.imgur.com/CCl7u4sh.jpg)
(https://i.imgur.com/lAr64Nih.jpg?1)
(https://i.imgur.com/ZfKbehah.jpg)
!? 6 map sensors?
Quote from: TopherSho on September 22, 2018, 12:43:23 PM
!? 6 map sensors?
Total of 7. ! But who's counting. LOL. Z
Glad to see I'm not the only one who keeps tools nice and neat in their place! LOL
Glad I did not post pics of my ... er ... workshop ... LOL. Always a wise decision on my part to show restraint :P Sure to make the old man proud, Z!
What's the green drink?
Quote from: ZSHO on September 22, 2018, 09:13:33 PM
Quote from: 802SHO on September 22, 2018, 08:46:08 PM
What's the green drink?
Backup Boost juice. Z
Gotta have your caffeine on hand! Lol Backup Boost Juice? Nice
I found a Good thread over @ the Edge Forum on NGK spark plugs and It's double precious metal meaning it has iridium on the electrode and the ground strap,which gives it the 100k service life .
BTW I did order the NGK 97122 Plugs for experimental purposes!
I will also see if I can measure the coil resistance for reference and will post some PICS very shortly. Z :)
https://www.fordedgeforum.com/topic/24602-spark-plugs/ (https://www.fordedgeforum.com/topic/24602-spark-plugs/)
SEP 24, 2018 | FORD PERFORMANCE
FORD'S FIRST PERFORMANCE SUV: EDGE ST HAS ARRIVED. Z
http://performance.ford.com/enthusiasts/media-room/20180/09/ford_s-first-performance-suv.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/media-room/20180/09/ford_s-first-performance-suv.html?cks=432128850&emailid=FP_FASTNEWS)
https://www.youtube.com/embed/Pa2pCJrHU0w
Ford Performance 3.5L Ecoboost Cold Spark Plug Set
$37.95
For use in engines with higher than stock cylinder combustion pressures
One heat range colder than stock spark plug
Sold in sets of 6
Spark plugs gapped to 0.031-inch (0.8mm)
Alternate Part Number: M1240535T
2011-2017 F-150 3.5L EcoBoost
2010-2017 Taurus SHO 3.5L EcoBoost
2010-2017 Flex 3.5L EcoBoost
(http://i68.tinypic.com/rvgl05.jpg)
https://www.levittownfordparts.com/ford-performance-ecoboost-cold-spark-plug-p-6968.html (https://www.levittownfordparts.com/ford-performance-ecoboost-cold-spark-plug-p-6968.html)
Data Breach Alert
On Friday, September 28, 2018 Facebook said that an attack on its computer network had affected the personal information of nearly 50 million users. Z
The attackers exploited the "View As" feature that allows users to see their Facebook page the way someone else would. This could allow the attackers to take over Facebook accounts. Facebook has fixed this issue and informed law enforcement. They also do not know if the affected accounts were misused or if user information was actually accessed.
https://www.google.com/amp/s/www.nytimes.com/2018/09/28/technology/facebook-hack-data-breach.amp.html (https://www.google.com/amp/s/www.nytimes.com/2018/09/28/technology/facebook-hack-data-breach.amp.html)
Wow, thanks for posting this, Z! Time to do some recon and decon I guess :(
Quote from: SHOdded on September 29, 2018, 11:19:06 AM
Wow, thanks for posting this, Z! Time to do some recon and decon I guess :(
NP! :) It was actually Norton that notified me . Z
2010-2012 Silver SHO blacked out chrome with exhaust 66W in VA... it was fun... you on here?
Sent from my iPhone using Tapatalk
Sync system maintenance screen popped out today,followed by more vibrant colors! Z
(https://i.imgur.com/tBExIdCh.jpg)
Quote from: ZSHO on October 03, 2018, 08:05:12 PM
Sync system maintenance screen popped out today,followed by more vibrant colors! Z
(https://i.imgur.com/tBExIdCh.jpg)
What does Mrs. Z think of said background?
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on October 03, 2018, 08:05:53 PM
Quote from: ZSHO on October 03, 2018, 08:05:12 PM
Sync system maintenance screen popped out today,followed by more vibrant colors! Z
(https://i.imgur.com/tBExIdCh.jpg)
What does Mrs. Z think of said background?
Sent from my iPhone using Tapatalk
I didn't realize I posted the wrong Pic! Thanks for pointing that out. Z
Quote from: ZSHO on October 03, 2018, 08:33:13 PM
Quote from: StealBlueSho on October 03, 2018, 08:05:53 PM
Quote from: ZSHO on October 03, 2018, 08:05:12 PM
Sync system maintenance screen popped out today,followed by more vibrant colors! Z
(https://i.imgur.com/tBExIdCh.jpg)
What does Mrs. Z think of said background?
Sent from my iPhone using Tapatalk
I didn't realize I posted the wrong Pic! Thanks for pointing that out. Z
Sssssuuuuurrrrreeee... lol
Sent from my iPhone using Tapatalk
Mine has started doing that again a decent bit. Did it last year so I replaced the battery and it stopped, now it is doing it again.
Hope it is not on its way out! Do you keep the battery on a tender? If not driven enough on a regular basis, might want to at least monthly tender-ize. See if it makes a difference.
Thats NOT System Off to save battery! Its System maintenance which sometimes applies updates to the sync system IIRC! Z
Quote from: SHOdded on October 04, 2018, 08:37:30 AM
Hope it is not on its way out! Do you keep the battery on a tender? If not driven enough on a regular basis, might want to at least monthly tender-ize. See if it makes a difference.
My car is my daily driver, longest it every sits is a couple days on a weekend if I need to use the truck for something big.
The G-MAX Justice is built from the company's G-MAX AS-05 and G-MAX RS, with SmartGrip technology, a strong center rib and stable shoulder blocks for crisp steering and maximum grip. The silica all-season compound and siping ensure up to 15% better wet braking performance, according to the company. It is manufactured in the United States.
StabilityTreadTM technology offers a wide footprint and longer tread life — up to 15% better than a leading competitor, according to General Tire.
The G-MAX Justice will be available in six sizes, including the Chevrolet Caprice PPV, Impala Police, and Tahoe PPX; Dodge Charger Pursuit; and Ford Police Interceptor Sedan and Utility. The G-Max Justice is scheduled for availability beginning October 2018. Z
Cool PI Articles below,enjoy. Z :)
https://www.government-fleet.com/312533/general-tire-introduces-g-max-justice-for-police (https://www.government-fleet.com/312533/general-tire-introduces-g-max-justice-for-police)
So I am loosing my daily driver which is currently the 2018 Ford Escape 1.5L since it's a company car and I'm changing companies....
Looks like I am going to be daily driving the SHO until I come up with a plan....
I like the idea of using the SHO as a DD... for all the reasons of a SHO.. big, comfy, descent power, etc etc...
However that leaves me without a play car... I'll leave all the stuff on the SHO and maybe add some stuff as time goes on (turbos, IC, PPE catted pipes are on the short list) but the days of going to the track all the time are probably gone. I don't really want to track my DD...
Maybe get a new play car? Or maybe pickup something small and good on gas for a DD and leave the SHo as a play car....
Tough decisions to be made... first world problems...
I am thinking maybe a Chevy SS for a play car....
Sent from my iPhone using Tapatalk
2017+ Fusion Sport for DD :D
Quote from: SHOdded on October 07, 2018, 08:37:45 AM
2017+ Fusion Sport for DD :D
I have test driven like 3 of them... I really want to like them... but something about the way they drive bugs me...
#norealshifter
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on October 07, 2018, 08:15:18 AM
So I am loosing my daily driver which is currently the 2018 Ford Escape 1.5L since it's a company car and I'm changing companies....
Looks like I am going to be daily driving the SHO until I come up with a plan....
I like the idea of using the SHO as a DD... for all the reasons of a SHO.. big, comfy, descent power, etc etc...
However that leaves me without a play car... I'll leave all the stuff on the SHO and maybe add some stuff as time goes on (turbos, IC, PPE catted pipes are on the short list) but the days of going to the track all the time are probably gone. I don't really want to track my DD...
Maybe get a new play car? Or maybe pickup something small and good on gas for a DD and leave the SHo as a play car....
Tough decisions to be made... first world problems...
I am thinking maybe a Chevy SS for a play car....
Sent from my iPhone using Tapatalk
I just took my sho out of storage to become my DD again while the play car gets ready for hibernation. The sho's been parked since April and it sure feels good to drive again. Probably my favorite car of everything I've owned.
The SHO has been my DD for well over five years now and even with my current setup on my signature and The very reason I purchased the SHO was having the capability of a AWD Sports sedan and speed rolled into one which makes it one heck of a DD for everyday conditions IMO! Enjoy the ride . Z
I was curious how much the Ford dealer has charged you to have the PTU Flushed!
They quoted me $516.22 plus tax while using my own fluids because of the oil cooler on the PP-SHO! TIA
I might start a separate Topic. Z
Labor $491.95
Seal 24.27
$516.22 - plus tax
Quote from: ZSHO on October 08, 2018, 02:16:48 PM
I was curious how much the Ford dealer has charged you to have the PTU Flushed!
They quoted me $516.22 plus tax while using my own fluids because of the oil cooler on the PP-SHO! TIA
I might start a separate Topic. Z
Labor $491.95
Seal 24.27
$516.22 - plus tax
That seems like a lot. I think I got quoted $200 from my local ford in Culpeper, VA
I originally was quoted $169 from my local Ford dealer so I dropped my car off. Once they had it they called and said they made a mistake $550. Had a local shop do it for $50 with me giving him the fluid.
Ya they all want to remove and reinstall the ptu.
Quote from: SHOdded on October 09, 2018, 03:02:14 PM
Ya they all want to remove and reinstall the ptu.
The same dealer told me the rear end had to be removed to change the fluid. That's when I said put my car on the ground Ill be there in 15 mins to pick it up.
LOL LOL LOL
I would Run as fast as you can! Z :o
As far as I'm concerned that dealer isn't qualified to vacuum a car.
I appreciate the replies from ^^^. But Its very unfortunate that the majority of Ford dealers have no clue on exactly whats involved in order to have the PTU Flushed!
Its from my understanding Ford charges 4.5 hrs labor book rate! Go figure! Z :no:
First change was $75. Second was $60.
I wonder if they ever did it.
Koons Ford in Sterling, VA and Jerry's Ford wouldn't even entertain the idea.
Local shop that does BG flushes did it for $189. Said they had never flushed a Ford PTU and was shocked. Said they would recommend to all their AWD Ford customers. They took pictures and showed me the fluid they drained.
Sent from my SM-G960U using Tapatalk
Quote from: markssho on October 09, 2018, 08:58:26 PM
Koons Ford in Sterling, VA and Jerry's Ford wouldn't even entertain the idea.
Local shop that does BG flushes did it for $189. Said they had never flushed a Ford PTU and was shocked. Said they would recommend to all their AWD Ford customers. They took pictures and showed me the fluid they drained.
Sent from my SM-G960U using Tapatalk
Thanks Mark! Side note - I hope your sister is doing well! Z
Quote from: ZSHO on October 09, 2018, 07:29:45 PM
I appreciate the replies from ^^^. But Its very unfortunate that the majority of Ford dealers have no clue on exactly whats involved in order to have the PTU Flushed!
Its from my understanding Ford charges 4.5 hrs labor book rate! Go figure! Z
I was quoted $80 To do a PTU fluid change. When it got there the price went way up. The drain plug made it easy, but filling required dropping the exhaust to get to the fill plug, per the Ford service manual.
It didn't get done. And the standard Ford answer is: "it is lifetime fluid and changing isn't required".
Quote from: ZSHO on October 09, 2018, 07:29:45 PM
I appreciate the replies from ^^^. But Its very unfortunate that the majority of Ford dealers have no clue on exactly whats involved in order to have the PTU Flushed!
Its from my understanding Ford charges 4.5 hrs labor book rate! Go figure! Z :no:
4.5 hours is completely ridiculous. I have a 13 PP and it took me less then an hour. The hard part was getting the vent tube on and off. The longest part was refilling the PTU through the vent.
FORD GT RECALL ISSUED AFTER CAR CATCHES FIRE
Ford GTs at risk of hydraulic fluid leaking from the valve block assemblies onto hot exhaust parts. Z :o
http://m.carcomplaints.com/news/2018/ford-gt-recall-car-catches-fire.shtml (http://m.carcomplaints.com/news/2018/ford-gt-recall-car-catches-fire.shtml)
:o Not good!
Enjoying the colder temps on 91 octane because that's the best we get till the tanks get diluted enough to show the winter gas which here is better then the summer gas (https://uploads.tapatalk-cdn.com/20181015/f6d04189703dda1803659a60ad025cd2.jpg)
Sent from my Pixel 2 XL using Tapatalk
Has anyone tried using a Magnet oil filter which is meant to collect finer metal particles,shavings within the oil filter. Z
https://www.youtube.com/embed/WcMBbop
Never had any need when a quality oil filter is in use. The Purolator BOSS is quite a filter, and highly recommended for use. There is a microGREEN filter I have yet to test out, developed in and supported by the State of NY btw :D down to 2 microns!
Quote from: SHOdded on October 15, 2018, 06:20:14 PM
Never had any need when a quality oil filter is in use. The Purolator BOSS is quite a filter, and highly recommended for use. There is a microGREEN filter I have yet to test out, developed in and supported by the State of NY btw :D down to 2 microns!
Good to know with the average oil filter collecting down to 20 microns. Z
What most filter mfrs won't talk about is efficiency at those micron ratings. There is nominal efficiency and there is absolute efficiency. Rabbit hole though.
http://www.microgreenfilter.com/Site/Customer-Service/faqs.aspx (http://www.microgreenfilter.com/Site/Customer-Service/faqs.aspx)
So started my new job this week... first time I have used a SHO for daily driving in well over 3 years...
The parking garage at my new place of work is FULL of Tesla's... all different versions...
And BMWs, AUDI, Ferrari's, and other high ends... the BMWs and Audi's are slums... a couple chargers (hell cats and Daytona)...
I low ride my ass in there with Ford...
Sent from my iPhone using Tapatalk
OMG you are messing with the demographic! What is the world coming to! LMAO!
Quote from: SHOdded on October 16, 2018, 06:36:48 PM
OMG you are messing with the demographic! What is the world coming to! LMAO!
Yup... maybe some exec will see the ford and get pissed that it's there and demand they give that poor ford driver a raise to get it out of the garage... or the just tow it cause they figured someone is parking there illegally..
Sent from my iPhone using Tapatalk
I think a raise is far more likely. Unless they have the prototype Tesla tow truck to forcibly evict you from your squatters quarters.
Quote from: StealBlueSho on October 16, 2018, 05:57:18 PM
So started my new job this week... first time I have used a SHO for daily driving in well over 3 years...
The parking garage at my new place of work is FULL of Tesla's... all different versions...
And BMWs, AUDI, Ferrari's, and other high ends... the BMWs and Audi's are slums... a couple chargers (hell cats and Daytona)...
I low ride my ass in there with Ford...
Haha what...the...hell...😝
Sent from my iPhone using Tapatalk
Quote from: 802SHO on October 16, 2018, 07:41:44 PM
Quote from: StealBlueSho on October 16, 2018, 05:57:18 PM
So started my new job this week... first time I have used a SHO for daily driving in well over 3 years...
The parking garage at my new place of work is FULL of Tesla's... all different versions...
And BMWs, AUDI, Ferrari's, and other high ends... the BMWs and Audi's are slums... a couple chargers (hell cats and Daytona)...
I low ride my ass in there with Ford...
Haha what...the...hell...
Sent from my iPhone using Tapatalk
Yup.. apparently I missed the SRT Viper... was too busy looking at the other cars...
But regardless... still parked on the upper level so no one could inflict any door dings.
Sent from my iPhone using Tapatalk
Dang sounds like a car show parking lot. Well you'll surprise some fellow employees no doubt when y'all leave for the day if they feel like playing
Quote from: 802SHO on October 16, 2018, 08:07:17 PM
Dang sounds like a car show parking lot. Well you'll surprise some fellow employees no doubt when y'all leave for the day if they feel like playing
No doubt, I'm fair game for a little play on the streets... not much... and rarely over the speed limit...
But apparently there is a large group of guys who go the track (autoX and 1/4 mile) so it could be a fun meetup.
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on October 16, 2018, 08:09:26 PM
Quote from: 802SHO on October 16, 2018, 08:07:17 PM
Dang sounds like a car show parking lot. Well you'll surprise some fellow employees no doubt when y'all leave for the day if they feel like playing
No doubt, I'm fair game for a little play on the streets... not much... and rarely over the speed limit...
But apparently there is a large group of guys who go the track (autoX and 1/4 mile) so it could be a fun meetup.
Sent from my iPhone using Tapatalk
Heck yeah! I'm not sure exactly what you do for work but it sounds like a perfect match for you! Car enthusiasts and a track group? Sign me up haha
Quote from: 802SHO on October 16, 2018, 08:21:23 PM
Quote from: StealBlueSho on October 16, 2018, 08:09:26 PM
Quote from: 802SHO on October 16, 2018, 08:07:17 PM
Dang sounds like a car show parking lot. Well you'll surprise some fellow employees no doubt when y'all leave for the day if they feel like playing
No doubt, I'm fair game for a little play on the streets... not much... and rarely over the speed limit...
But apparently there is a large group of guys who go the track (autoX and 1/4 mile) so it could be a fun meetup.
Sent from my iPhone using Tapatalk
Heck yeah! I'm not sure exactly what you do for work but it sounds like a perfect match for you! Car enthusiasts and a track group? Sign me up haha
I just took at a job at Amazon... and the guys that have been there for 4 years are making a killing on the stock they invested in... I'm one of the IT guys there now..
Lots of younger guys who are single with money... why not indulge in a nice car right? Although the majority of them haven't really heard much about the SHO.. they didn't believe it runs a sub 4 second 0-60 at the track.
Hopefully there is a track get together before the season ends.. there is a guy with a P100D Tesla with Ludacris mode... I wanna see it go!
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on October 16, 2018, 08:29:55 PM
Quote from: 802SHO on October 16, 2018, 08:21:23 PM
Quote from: StealBlueSho on October 16, 2018, 08:09:26 PM
Quote from: 802SHO on October 16, 2018, 08:07:17 PM
Dang sounds like a car show parking lot. Well you'll surprise some fellow employees no doubt when y'all leave for the day if they feel like playing
No doubt, I'm fair game for a little play on the streets... not much... and rarely over the speed limit...
But apparently there is a large group of guys who go the track (autoX and 1/4 mile) so it could be a fun meetup.
Sent from my iPhone using Tapatalk
Heck yeah! I'm not sure exactly what you do for work but it sounds like a perfect match for you! Car enthusiasts and a track group? Sign me up haha
I just took at a job at Amazon... and the guys that have been there for 4 years are making a killing on the stock they invested in... I'm one of the IT guys there now..
Lots of younger guys who are single with money... why not indulge in a nice car right? Although the majority of them haven't really heard much about the SHO.. they didn't believe it runs a sub 4 second 0-60 at the track.
Hopefully there is a track get together before the season ends.. there is a guy with a P100D Tesla with Ludacris mode... I wanna see it go!
Sent from my iPhone using Tapatalk
Congratulations on your new job there! I for one would definitely indulge more being single of course probably not with the money those guys have. I've only seen some video of those teslas....man I would love to see one go down the track. Aside from feeling that instant relentless power. Head rush x10!
I noticed Amazon is now carrying Amsoil Signature series full synthetic motor oil. Z
AMSOIL Signature Series 0W-30 Synthetic Motor Oil (Case) $162.00
Signature Series 5W-30 Synthetic Motor Oil (((CASE OF 12))) $160.00
https://www.amazon.com/Signature-5W-30-Synthetic-Motor-CASE/dp/B01552N2FW/ref=mp_s_a_1_3?ie=UTF8&qid=1539817527&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=amsoil+5w-30+synthetic+motor+oil&dpPl=1&dpID=51xj76Ekk4L&ref=plSrch (https://www.amazon.com/Signature-5W-30-Synthetic-Motor-CASE/dp/B01552N2FW/ref=mp_s_a_1_3?ie=UTF8&qid=1539817527&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=amsoil+5w-30+synthetic+motor+oil&dpPl=1&dpID=51xj76Ekk4L&ref=plSrch)
https://www.amazon.com/AMSOIL-Signature-0W-30-Synthetic-Motor/dp/B008J8IVZG/ref=mp_s_a_1_16?ie=UTF8&qid=1539817843&sr=8-16&pi=AC_SX236_SY340_FMwebp_QL65&keywords=amsoil+synthetic+motor+oil (https://www.amazon.com/AMSOIL-Signature-0W-30-Synthetic-Motor/dp/B008J8IVZG/ref=mp_s_a_1_16?ie=UTF8&qid=1539817843&sr=8-16&pi=AC_SX236_SY340_FMwebp_QL65&keywords=amsoil+synthetic+motor+oil)
New vendor tho. I think trying to turn a quick buck maybe?
Quote from: SHOdded on October 17, 2018, 07:16:26 PM
New vendor tho. I think trying to turn a quick buck maybe?
Good eye Manu! Tonygomez15 storefront
Just launched/No feedback yet. $160.00
+ $0.00 estimated tax. Z
I'm having the PTU Flushed @ my local friendly Ford Dealer since my back gave out..:(
The so called Tech's cannot locate the Top fill drain plug on my PP-SHO! He was only able to locate the bottom temp sensor since 0900 hrs and its way after 14:00 hrs now!!
I asked to speak with the Service manager since my patience was thining and had to show him exactly where the fill drain is located!!! SMH!
Still waiting eagerly to see or hear what the heck is going on! >:(
Its quite sad as they are clueless on how to find the hole and would think they would have a FSM or SSM on the procedure!
I told them that I will make certain to write an excellent review. Z
Quote from: ZSHO on October 18, 2018, 01:04:17 PM
I'm having the PTU Flushed @ my local friendly Ford Dealer since my back gave out.....
The Tech cannot locate the Top fill drain plug on my PP-SHO! He was only able to locate the bottom temp sensor since 0900 hrs and its way after lunch time now!!
I asked to speak with the Service manager since my patience was thining and had to show him exactly where the fill drain is located!!! SMH!
Still waiting eagerly to see or hear what the heck is going on! >:(
Its quite sad as they are clueless and would think they would have a FSM or SSM on the procedure!
I will make certain to write an excellent review. LOL. Z
Oh man! Please update us on whether or not you had to show them how to service their car! Lol
Ah, just another in the long line of dealer customer service's excellent stories LOL. You'd think after so many years in production, they would catch up just a wee bit!
It looks like they changed the converter gaskets,bolts and studs in the process. Z
Catalytic Converter Stud - Ford (-W712829-S900)
https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-stud-w712829s900
Front Pipe Gasket - Ford (7T4Z-9450-AA)
https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-gasket-7t4z9450aa/?c=Zz1leGhhdXN0LXN5c3RlbSZzPWV4aGF1c3QtY29tcG9uZW50cyZpPUxQMDgxODU1JnI9bGF5ZXJfOCZhPWZvcmQmbz10YXVydXMmeT0yMDEzJnQ9c2hvJmU9My01bC12Ni1nYXM%3D
Catalytic Converter Gasket - Ford (AA5Z-6L612-A)
https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-gasket-aa5z6l612a/?c=Zz1leGhhdXN0LXN5c3RlbSZzPWV4aGF1c3QtY29tcG9uZW50cyZpPUtEMDkyMTM1JnI9bGF5ZXJfMyZhPWZvcmQmbz10YXVydXMmeT0yMDEzJnQ9c2hvJmU9My01bC12Ni1nYXM%3D
(https://i.imgur.com/hFrkWW1h.jpg)
(https://i.imgur.com/H8NrfGVh.jpg)
(https://i.imgur.com/UMIndS2h.jpg?2)
CUSTOM FORD UTILITIES DELIVER POWER, PERFORMANCE AND PERSONALIZATION FOR ADVENTURES OUTDOORS OR ON TRACK. Z
http://performance.ford.com/enthusiasts/media-room/20180/10/sema-utilities-builds-2018.html?cks=432128850&emailid=FP_FASTNEWS (http://performance.ford.com/enthusiasts/media-room/20180/10/sema-utilities-builds-2018.html?cks=432128850&emailid=FP_FASTNEWS) .
That Destination Expedition: Hulst Customs' ultimate family adventurer
looks Dope with the Lexani LF-002 forged wheels, 26 x 10 inches
Lexani tires, 305/30-26 tires. Z
Oversized on the Edge, but perfect for the Expedition!
For anyone who was wondering, 25 bags of cellulose insulation fit comfortably in the back (and front) of a 5th Gen Explorer. I could have maybe wedged 2, MAYBE 3 more in there (4, if I sat on one).
NOTE: The extreme R-value may cause you to get a little warm on your ride home.
(https://uploads.tapatalk-cdn.com/20181020/b184710fe43ff5c8bddc5edc54598a28.jpg)
Sent from my iPhone using Tapatalk
Ha Ha. We are always bragging about how much we can fit in the Edge. 20 bags of mulch in the hatch area with room to spare with the seats up.
I picked up two pales of
VP-
M1 for $40.00 even each. Z :)
(https://i.imgur.com/91y0giFh.jpg)
(https://i.imgur.com/HG14rUrh.jpg)
Never too much in stock!
Quote from: ZSHO on October 21, 2018, 10:40:29 AM
I picked up two pales of VP-M1 for $40.00 even each. Z :)
(https://i.imgur.com/91y0giFh.jpg)
(https://i.imgur.com/HG14rUrh.jpg)
Boost juice huh.
Besides being "cleaner" . Any performance advantage over quality "WWF" ?
Quote from: Macgyver on October 21, 2018, 02:23:26 PM
Quote from: ZSHO on October 21, 2018, 10:40:29 AM
I picked up two pales of VP-M1 for $40.00 even each. Z :)
(https://i.imgur.com/91y0giFh.jpg)
(https://i.imgur.com/HG14rUrh.jpg)
Boost juice huh.
Besides being "cleaner" . Any performance advantage over quality "WWF" ?
Huge difference between 100% meth VP-M1 and and WWF.... can't really compare the two.
Sent from my iPhone using Tapatalk
The VP M1 Racing fuel is Straight Methanol and known for its consistency and not having to worry about the mixing ratio is a plus...
Its a bit more expensive than boost juice but well worth it IMO! Z
NEEDA 653096 - Magnetic Oil Drain Plug Pilot Point with Inset Gasket M12-1.75 . Z
$3.43https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,engine,oil+drain+plug,10231 (https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,engine,oil+drain+plug,10231)
It could also be had @ your local www.advanceautoparts.com (http://www.advanceautoparts.com) for
$5.99https://shop.advanceautoparts.com/p/needa-parts-oil-drain-plug-magnetic-m12-175-head-size-13mm-65372/9110157-p (https://shop.advanceautoparts.com/p/needa-parts-oil-drain-plug-magnetic-m12-175-head-size-13mm-65372/9110157-p)
(https://i.imgur.com/cpulm3Xm.jpg)
I have been trying to troubleshoot a P0131 & P0151 which is related to the Front primary 02 sensors on both Bank 1 and bank 2 AFAIK since having my vehicle seviced @ the Ford dealer for a PTU Flush & Trans fluid exchange on my most recent visit...
They did have to remove the passenger side DP due to the oil cooler in order to gain access to the temp sensor plus oil fill drain plug on the PTU on my PP-SHO....
So it's from my understanding if the readings on bank 1 are different from bank 2 then It will send you to one bank or the other, since the problem is in that bank telling me the issue correlates from one to the other! Correct me if I'm wrong! Z
I found a great article on the 02 sensors and more! I hope it helps someone decipher your concern in the very near future. Z :)
UEGO versus Oxygen Sensor
Some vehicles use a different type of upstream oxygen sensor known as a Universal Exhaust Gas Oxygen (UEGO) sensor. The EcoBoost V6 uses the UEGO sensors. This operates differently than a normal oxygen sensor. It provides a more robust (tolerant, less fluctuating) measurement of the air to fuel ratio. It uses the same Nernst cell to measure oxygen content in the exhaust gases.
Instead of comparing oxygen content to the outside air, it compares it to the oxygen content in a self-contained reference chamber. Like the old O2 sensor, it detects lean (more oxygen) and rich (less oxygen) exhaust, and the PCM makes an air-fuel ratio change.
The UEGO does not switch as rapidly or as much as a conventional sensor. At idle, you may not be able to detect any PID current flow (amps) movement at all. How can you tell if the vehicle has a UEGO sensor? Five wires run from the sensor instead of two.
Go to the IDS and check out what the datalogger recorded during the scan. The officer reported a driveability issue: lack of power during acceleration. Compare the seven PID values (volts, psi) at 1 second and then again at 15 seconds as the car is accelerating.
Sure enough, you can see the voltage change in the accelerator pedal position sensor, the cylinder head temperature sensor, and the throttle position sensor. You can see the fuel rail pressure in psi, and the manifold absolute pressure in psi, both change. And see the percentage of short-term fuel trim change. But what you don't see a change in from the one-second mark to the 15-second mark is the voltage on the throttle inlet pressure.
What does it mean when the UEGO readings on bank 1 are different from bank 2? It sends you to one bank or the other, since the problem is in that bank. PIDs for both sides of the UEGO are the same, perhaps a gasket or head. If the UEGO readings for both sides are the same, it means the fault is a system they have in common, perhaps a MAP sensor......
Interesting.
I found a sweet deal on a four pack bottle of Heet @ Walmart. Z :)
$5.87(http://i68.tinypic.com/f1cegx.jpg)
Motorcraft Now Offering Brake Pads, Coated Brake Rotors And Drums plus much much ....Z
http://www.brakeandfrontend.com/motorcraft-now-offering-brake-pads-coated-brake-rotors-and-drums/ (http://www.brakeandfrontend.com/motorcraft-now-offering-brake-pads-coated-brake-rotors-and-drums/)
After last track day she's been sitting here ever since. Literally hasn't moved from this spot. Well that ends this afternoon. I'm going to wake her ass up and go raise hell at the last track day of the season for New England Dragway! New Personal Best? Let's see 😈
(https://i.imgur.com/AaurA8ah.jpg)
Just Do It :D Best of luck!
Quote from: 802SHO on October 31, 2018, 06:02:56 AM
After last track day she's been sitting here ever since. Literally hasn't moved from this spot. Well that ends this afternoon. I'm going to wake her ass up and go raise hell at the last track day of the season for New England Dragway! New Personal Best? Let's see
Get her done!
Sent from my iPhone using Tapatalk
Quote from: 802SHO on October 31, 2018, 06:02:56 AM
After last track day she's been sitting here ever since. Literally hasn't moved from this spot. Well that ends this afternoon. I'm going to wake her ass up and go raise hell at the last track day of the season for New England Dragway! New Personal Best? Let's see 😈
I'll see you there buddy. Hopefully we both run some real good times.
Eat Em Up there 802SHO! BTW Fixed the ^^^ PIC for ya. Z :)
Just ran across this. Pretty interesting twin turbo 5.0 4 door mustangs hell yes ford.
https://www.google.com/amp/s/www.motor1.com/news/273890/ford-mustang-four-door/amp/ (https://www.google.com/amp/s/www.motor1.com/news/273890/ford-mustang-four-door/amp/)
Might be under the Lincoln label, if Lincoln is still around. But welcome, most definitely! Ford seems to be adopting a more positive stance towards RWD biased powertrains for the future, so this could really shake up the market.
4-door mustang???
*pukes*
The FReak-O-Boost
Part 3: SEMA Ford F-150 EcoBoost FX4. Z
FREAKOBOOST v2 @ Ford SEMA
Our team has been quietly working away, building an all new 2019 Ford F150 EcoBoost for Ford SEMA. Designed to pick up where our original Freakoboost truck left off - we applied everything learned over the last 8 years of F150 EcoBoost development. Using our entire catalog of Full-Race Gen2 F150 EcoBoost parts along with a team of top shelf partners, we went all out.
https://www.full-race.com/articles/the-freak-o-boost/?utm_source=Full-Race+Company+Newsletter&utm_campaign=2e9561cd16-EMAIL_CAMPAIGN_2018_10_24_03_46_COPY_23&utm_medium=email&utm_term=0_d1d788997f-2e9561cd16-123612941&mc_cid=2e9561cd16&mc_eid=b4947c08df (https://www.full-race.com/articles/the-freak-o-boost/?utm_source=Full-Race+Company+Newsletter&utm_campaign=2e9561cd16-EMAIL_CAMPAIGN_2018_10_24_03_46_COPY_23&utm_medium=email&utm_term=0_d1d788997f-2e9561cd16-123612941&mc_cid=2e9561cd16&mc_eid=b4947c08df)
I came across an old PIC that I have referenced on many occasions that sho's the location of the wastegate hose that comes from the Boost reference solenoid located on TOP of the manifold and then leads to the rear turbo next to the charge pipe and ultimately to the rear turbo as shown on the second Pic....
I hope it helps someone troubleshoot there (boost) issue! Its the 1/4 hose highlighted in
RED. ..
I will try to get some better Pics soon. Z :)
(http://i63.tinypic.com/2nkkkr5.jpg)
(https://i.imgur.com/sD6l3Ffh.jpg?2)
New Video from (FTM) on Do You Have a Blown Head Gasket or Not? Z :)
https://www.youtube.com/embed/Drd9N-qWVJY
I guess many of you know how much I love PICS! Pics or nothing! Lol. Z :D
(https://i.imgur.com/NZVA0egh.jpg)
(https://i.imgur.com/UwreKzUh.jpg?1)
(https://i.imgur.com/8oqvUXVh.jpg)
Looks so much better without all the ancillary hoses and wiring lol.
Whats wrong with this Pic!!! Z :bangin:
(https://i.imgur.com/IioqrXkh.jpg)
:o I bet the same guy would sell the clothes off his back too!
I think I'm sold on some
VP Fuel stabilizer.Lol. Z
https://www.youtube.com/embed/KfIKEbLBNKA
Oh man, first the methanol, now this. I dunno ...y
Here, feed your obsession some more (no offense, Calvin Klein)
https://www.youtube.com/embed/N35sDcPCCXs
Quote from: SHOdded on November 06, 2018, 04:21:37 PM
Oh man, first the methanol, now this. I dunno ...y
Here, feed your obsession some more (no offense, Calvin Klein)
https://www.youtube.com/embed/N35sDcPCCXs
Manu you know me to well! Lol. Z :bravo: Encore
Nothing and I mean almost nothing makes me happier then when an entire line of cars team up against one shithead trying to cut it. Thank you my people on 93 north this evening for not letting that moron cut everyone off from the breakdown lane tonight.
New Video from Brian (FTM) on Ford Vehicle Noises: #6 Rear Axle
Howl Due to a Worn Ring and Pinion. Z
https://www.youtube.com/embed/Awbk1kPydX4
Random thought's of the day! Hmmm. Today's 1st snowfall of the season was Awe to see Herds of Chargers/challengers stuck on the roadside while looking @ my rear view mirror waving goodbye. Lol. Z :ford:
Yeah but what gets ya going has to eventually stop. This snow was brutal for us. Like trying to stop on wet leaves.
SHO went fine cept for the stopping part.
Quote from: ZSHO on November 15, 2018, 06:08:50 PM
Random thought's of the day! Hmmm. Today's 1st snowfall of the season was Awe to see Herds of Chargers/challengers stuck on the roadside while looking @ my rear view mirror waving goodbye. Lol. Z :ford:
Getting the same storm here now as we speak. 4-8 over night for us they are saying. Tomorrow will be the first time in the snow with the sho. I'm oddly excited to see how it does.
Quote from: shoNoff on November 15, 2018, 10:09:50 PM
Quote from: ZSHO on November 15, 2018, 06:08:50 PM
Random thought's of the day! Hmmm. Today's 1st snowfall of the season was Awe to see Herds of Chargers/challengers stuck on the roadside while looking @ my rear view mirror waving goodbye. Lol. Z :ford:
Getting the same storm here now as we speak. 4-8 over night for us they are saying. Tomorrow will be the first time in the snow with the sho. I'm oddly excited to see how it does.
R U lowered! If not you should be just fine and enjoy the SHO in the Snow! Z
Quote from: ZSHO on November 15, 2018, 06:08:50 PM
Random thought's of the day! Hmmm. Today's 1st snowfall of the season was Awe to see Herds of Chargers/challengers stuck on the roadside while looking @ my rear view mirror waving goodbye. Lol. Z :ford:
That's one thing about the sho; I enjoy driving it in the winter almost as much as driving it in the summer
I have the h&r springs and brand new motorcraft struts and shocks. I purchased them maybe a month ago but held off on the install. I originally was not going to drive the sho this winter. But I gave my niece my other car since hers got totaled. So that made me hold off. I will say she was a tank in the snow this morning. I was very impressed with the car and the Conti DWS in the snow. Z does having the springs installed hurt the snow driving a lot with the lower ground clearance?
The lowered stance does affect some of the AWD capabilities especially when snow builds up and gets stuck between the wheel well and tire due to the lower clearance. Z
Sirius Xm Travel link is free now until Thanksgiving day weekend Nov 26! Enjoy. Z :)
MSD Ignition Direct Replacement Ignition Coil EcoBoost 3.5L V6. Z
Part Number: 121-82576
$240.26
https://www.jegs.com/i/MSD-Ignition/121/82576/10002/-1 (https://www.jegs.com/i/MSD-Ignition/121/82576/10002/-1)
Of course the coils go on sale 3 weeks after I bought them.
Ask for price match LOL
New Video from (FTM) on 3.5 Duratec engine and recommends BG EPR Flush! Dunno! Z
https://www.amazon.com/Bg109-Engine-Performance-Restoration-Makers/dp/B00IAPLIDK/ref=as_li_ss_tl?ie=UTF8&qid=1542649830&sr=8-1&keywords=bg+epr&linkCode=sl1&tag=fordt-20&linkId=bc0eee538071e88076c9b248cccf2543&language=en_US (https://www.amazon.com/Bg109-Engine-Performance-Restoration-Makers/dp/B00IAPLIDK/ref=as_li_ss_tl?ie=UTF8&qid=1542649830&sr=8-1&keywords=bg+epr&linkCode=sl1&tag=fordt-20&linkId=bc0eee538071e88076c9b248cccf2543&language=en_US)
https://www.youtube.com/embed/xvUr_k4j9gc
What a Duratec engine can look with proper maintenance and quality engine oil (ie, full synthetic)
https://www.youtube.com/watch?v=I4aBmCe1tQU
I came across some good info on [Cut Open] Motorcraft FL500S - Oil Filter @ 5089 miles from 11/11/18 .Z
https://www.bobistheoilguy.com/forums/ubbthreads.php/topics/4929885/cut-open-motorcraft-fl500s-5089-miles (https://www.bobistheoilguy.com/forums/ubbthreads.php/topics/4929885/cut-open-motorcraft-fl500s-5089-miles)
I started up Red today with the coldest day of the year and Iater was Greeted by the Battery system saver off on the home screen!
I do have the upgraded Motorcraft BXT-850 for almost 4 years since it was replaced under warranty and has been working flawlessly....
I will try to have a parasytic Draw test performed prior to old man winter is upon us. Z
:o
New Video from Brian (FTM) on F150 09-14 Rear window inoperative.
The most common and easy Fix. Z :)
New Slider switch for the F150 below...
https://www.amazon.com/gp/product/B004A2EKDM/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=fordt-20&linkId=7c05048e7fdd5526e1ada69d91ccaa8a&language=en_US (https://www.amazon.com/gp/product/B004A2EKDM/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=fordt-20&linkId=7c05048e7fdd5526e1ada69d91ccaa8a&language=en_US)
https://youtu.be/Qz5fS7x65h4 (https://youtu.be/Qz5fS7x65h4)
I might be heading out to LMS once again prior to Spring for an updated Dyno Tune to see where Red is @ plus install a new Alky pump prior to the 2 year DPM custom install was performed. Z
Good luck and have fun!
Not a bad price for a bunch of stuff!
https://www.livernoismotorsports.com/product/LPP999101 (https://www.livernoismotorsports.com/product/LPP999101)
Quote from: StealBlueSho on December 02, 2018, 09:18:34 AM
Not a bad price for a bunch of stuff!
https://www.livernoismotorsports.com/product/LPP999101 (https://www.livernoismotorsports.com/product/LPP999101)
Something like this! Lol. Its a nice quality piece for sure. LMS gave me one upon my DPM Install which included 2 additional windshield banners which one I gave to Brian (Bamsho). Z :)
(http://i63.tinypic.com/24pvqc0.jpg)
I need a windshield banner...
Does it stay above the AS1 line? Otherwise it will fail inspection here in VA.
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on December 02, 2018, 11:07:01 AM
I need a windshield banner...
Does it stay above the AS1 line? Otherwise it will fail inspection here in VA.
Sent from my iPhone using Tapatalk
Its roughly 4 inches wide IIRC! LMS gave me 2 banners which one they installed on my SHO and the other given to Brian (Bamsho),sorry. Z
(https://i.imgur.com/kdheJ0Fh.jpg)
Quote from: ZSHO on December 02, 2018, 12:09:04 PM
Quote from: StealBlueSho on December 02, 2018, 11:07:01 AM
I need a windshield banner...
Does it stay above the AS1 line? Otherwise it will fail inspection here in VA.
Sent from my iPhone using Tapatalk
Its roughly 4 inches wide IIRC! LMS gave me 2 banners which one they installed on my SHO and the other given to Brian (Bamsho),sorry. Z
(https://i.imgur.com/kdheJ0Fh.jpg)
I wasn't saying I wanted your extra lol! I was just saying I need one.
Thanks for the picture... looks like a good stocking stuffer ;-)
Sent from my iPhone using Tapatalk
I purchased an Uniden R3 radar detector through Amazon prime through an authorized dealer back on 4/18 and was having intermittent power off issues which was a bit troublesome...
I recently tried to return the radar and to my surprise they accepted the return request and today was approved,credited for the amount of $324.25 off the list price!
I'm Glad Amazon made good on there end. Z :)
Quote from: ZSHO on December 04, 2018, 05:56:54 PM
I purchased an Uniden R3 radar detector through Amazon prime back on 4/18 and was having intermittent power off issues which was a bit troublesome...
I recently tried to return the radar and to my surprise they accepted the return request and today was approved for the amount of $324.25 off the list price! Not to shabby IMO and Glad Amazon made good on there end. Z :)
I have the same radar but I haven't had any issues hopefully it stays that way.
Where is yours mounted?
Sent from my SM-N960U using Tapatalk
Quote from: BoostfoSHO on December 04, 2018, 06:07:51 PM
Quote from: ZSHO on December 04, 2018, 05:56:54 PM
I purchased an Uniden R3 radar detector through Amazon prime back on 4/18 and was having intermittent power off issues which was a bit troublesome...
I recently tried to return the radar and to my surprise they accepted the return request and today was approved for the amount of $324.25 off the list price! Not to shabby IMO and Glad Amazon made good on there end. Z :)
I have the same radar but I haven't had any issues hopefully it stays that way.
Where is yours mounted?
Sent from my SM-N960U using Tapatalk
I used a Bussmann BP/HHH ATM Add-A-Fuse and a 5amp orange ATM mini used SLOT #31 under the drivers side fuse compartment .Z
Quote from: ZSHO on December 04, 2018, 06:14:08 PM
Quote from: BoostfoSHO on December 04, 2018, 06:07:51 PM
Quote from: ZSHO on December 04, 2018, 05:56:54 PM
I purchased an Uniden R3 radar detector through Amazon prime back on 4/18 and was having intermittent power off issues which was a bit troublesome...
I recently tried to return the radar and to my surprise they accepted the return request and today was approved for the amount of $324.25 off the list price! Not to shabby IMO and Glad Amazon made good on there end. Z :)
I have the same radar but I haven't had any issues hopefully it stays that way.
Where is yours mounted?
Sent from my SM-N960U using Tapatalk
I used a Bussmann BP/HHH ATM Add-A-Fuse and a 5amp orange ATM mini used SLOT #31 under the drivers side fuse compartment .Z
Nice, I tapped into the rear view mirror and used a mirror mount. It's a great radar definitely works really well
Sent from my SM-N960U using Tapatalk
Radar Detectors are illegal in the Great Commonwealth of Virginia.. I got pulled over once because a cop thought my Sirius radio was a radar detector...
Sent from my iPhone using Tapatalk
Quote from: BoostfoSHO on December 04, 2018, 06:19:42 PM
Quote from: ZSHO on December 04, 2018, 06:14:08 PM
Quote from: BoostfoSHO on December 04, 2018, 06:07:51 PM
Quote from: ZSHO on December 04, 2018, 05:56:54 PM
I purchased an Uniden R3 radar detector through Amazon prime back on 4/18 and was having intermittent power off issues which was a bit troublesome...
I recently tried to return the radar and to my surprise they accepted the return request and today was approved for the amount of $324.25 off the list price! Not to shabby IMO and Glad Amazon made good on there end. Z :)
I have the same radar but I haven't had any issues hopefully it stays that way.
Where is yours mounted?
Sent from my SM-N960U using Tapatalk
I used a Bussmann BP/HHH ATM Add-A-Fuse and a 5amp orange ATM mini used SLOT #31 under the drivers side fuse compartment .Z
Nice, I tapped into the rear view mirror and used a mirror mount. It's a great radar definitely works really well
Sent from my SM-N960U using Tapatalk
Nice radar indeed! I just updated to the latest firmware version 1.46 which seems like a significant improvement! Fingers crossed for ya. Z
https://www.youtube.com/embed/DRnQ2SB-nhM
New NGK Ruthenium HX Spark plugs released and says its new high ignitability NGK Ruthenium HX plug guarantees maximum combustion efficiency to ensure the most complete fuel burn, a quicker throttle response, smoother idle and better cold start. Z
"Utilizing patented precious-metal Ruthenium technology, the new NGK Ruthenium HX offers higher ignitability, enhanced oxidation resistance and increased durability for today's modern engines...
Due to the metal composition and specialized tip designs, NGK Ruthenium HX offers the highest performance and life expectancy of any NGK spark plug on the market, according to the company. It achieves this by combining two advanced tip designs: double fine electrode (DFE) and projected square platinum electrode (PSPE). DFE is intended for non-turbo applications, and PSPE is intended for turbo applications.
http://www.counterman.com/ngk-introduces-high-ignitability-ruthenium-hx-spark-plugs-adds-technical-sensors/ (http://www.counterman.com/ngk-introduces-high-ignitability-ruthenium-hx-spark-plugs-adds-technical-sensors/)
$8.35 ea @ www.rockauto.com (http://www.rockauto.com)
https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,ignition,spark+plug,7212 (https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,ignition,spark+plug,7212)
The Ford Taurus SHO Owners Club on FB is now a closed group. So if anyone is a member and sees something worth reporting here, please do!
REDLINE ALL AROUND. Z ;)
(https://i.imgur.com/IQHQQwQh.jpg)
use with every fillup or once every 5K etc.?
A case can be had for 108 on Amazon. PEA % has dropped over the years tho. Or maybe honesty in labeling LOL.
https://smile.amazon.com/gp/product/B000T9RLT0/
Redline or Chevron with techron or BG44K @ every oil change interval depending the mood I'm in. Lol.. .
AFAIK Redline has the highest concentration (30-50%) of PEA, polyether amine! Dunno. Z
Used to be, now it is <30% per the MSDS. Still might out do the Techron Concentrate Plus, not sure about BG 44K.
Great to have info. Z :)
Why does one choose to get sick late @ night! Z :doctor:
Not getting enough sleep? It's the season ... hope you feel better soon!
Quote from: ZSHO on December 07, 2018, 03:35:54 AM
Why does one choose to get sick late @ night! Z :doctor:
Cause why not? I am right there with you... started getting sick two days ago.. bleh..
Oh up and down the eastern seaboard! Feel better!
Sweet Deal on a Bosch Platinum Series AGM Battery Group, Size 65
Part#:
65-750BAGM ltd. 48 month free replace
48 month absorbed glass mat (agm) battery
cca: 750\noe cca: 650 - sho\noe cca: 750 - police
$159.99I do like the EXIDE FPAGM65 EXIDE EDGE FLAT-PLATE AGM - CCA: 750; BCI battery followed by the Odyssey 65-PC1750T and the NorthStar NSB-AGM-65 Battery which are higher end beefier battery's!
I might start a seperate post soon. Z
(https://i.imgur.com/PWOBx2Uh.jpg)
https://www.pepboys.com/bosch-platinum-series-agm-battery-group-size-65/product/838869/2013/FORD/TAURUS/V6-3496%203.5L%20DOHC?quantity=1 (https://www.pepboys.com/bosch-platinum-series-agm-battery-group-size-65/product/838869/2013/FORD/TAURUS/V6-3496%203.5L%20DOHC?quantity=1)
I guess with old man winter upon us it appears that the Motorcraft BXT-65-850 Battery is Discontinued and curious if this new MOTORCRAFT BHAGM65 (AGM) would be a solid alternative! Z
$199.95 @ your local Ford Dealer.
Fleet BCI Group: 65; CCA: 750
Affordable, reliable and built to last, Motorcraft AGM batteries stand out as the smart option. The Absorbed Glass Mat design is 100% leak and spill proof because the Electrolyte is permanently held in the glass mat separator instead of free flowing within each cell. Oxygen recombination reduces water loss and reassures maintenance-free performance. From a performance perspective, the AGM battery boasts better recharge capability while providing up to 3 times more starts per cycle and produces more power per cycle.
Why choose an AGM battery?
Product life lasts up to two times longer
Extremely heat and cold tolerant
Ideal for vehicles equipped with lots of electronics (heated seats, navigation system, parking assist)
Durable - Outstanding vibration resistance
Safer - No free-flowing electrolyte or spill hazard..
https://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/electrical-cat/battery-scat (https://www.tascaparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/electrical-cat/battery-scat)
https://parts.ford.com/shop/en/us/battery-and-related-components/battery-7871903-1?myAcctMain=1&catalogId=251&langId=-1&krypto=1BjzPyayPBhV%2F8kHsVaM0G6Mo8RNaXHvlgV%2B9b6DsX9T8%2B0lZKlca9UNZ55ZwJEmWUYj9VkP4I4BEO10wOUV9LrZf7xKjCP%2FHeEEwt7odpM%3D (https://parts.ford.com/shop/en/us/battery-and-related-components/battery-7871903-1?myAcctMain=1&catalogId=251&langId=-1&krypto=1BjzPyayPBhV%2F8kHsVaM0G6Mo8RNaXHvlgV%2B9b6DsX9T8%2B0lZKlca9UNZ55ZwJEmWUYj9VkP4I4BEO10wOUV9LrZf7xKjCP%2FHeEEwt7odpM%3D)
Too bad, the 850 was a solid alternative. You can get 720-750 CCA agm batteries from pretty much anyone tho.
I spoke with my Ford dealer today and confirmed that the Motorcraft BXT-65-850 is still in stock and available and will probably pick one up for backup purposes as my current MC-850 is still going strong after 4 years now. Z :)
FYI-There are many online sites stating Discontinued as mentioned ^^^
$139.99
Callahan Brake Parts
Callahan CCK03712 FRONT Premium Semi-Loaded Red Coated Caliper Pair + Hardware Kit [Left & Right]. Z
2013 - 2017 Ford Explorer - Models with Heavy Duty Brakes; 352mm (13.86") Front Rotors ONLY..
(http://i64.tinypic.com/2i8dlvl.jpg)
https://www.amazon.com/Callahan-CCK03712-Premium-Semi-Loaded-Hardware/dp/B0794722PV/ref=mp_s_a_1_1?ie=UTF8&qid=1544965634&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Callahan+Brake+Parts+Callahan+CCK03712+FRONT+Premium+Semi-Loaded+Red+Coated+Caliper+Pair (https://www.amazon.com/Callahan-CCK03712-Premium-Semi-Loaded-Hardware/dp/B0794722PV/ref=mp_s_a_1_1?ie=UTF8&qid=1544965634&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Callahan+Brake+Parts+Callahan+CCK03712+FRONT+Premium+Semi-Loaded+Red+Coated+Caliper+Pair)
Quote from: ZSHO on December 16, 2018, 08:10:45 AM
Callahan Brake Parts
Callahan CCK03712 FRONT Premium Semi-Loaded Red Coated Caliper Pair + Hardware Kit [Left & Right]. Z
But is the warranty written on the box?
:P
Quote from: 92BlackGT on December 17, 2018, 07:08:14 AM
Quote from: ZSHO on December 16, 2018, 08:10:45 AM
Callahan Brake Parts
Callahan CCK03712 FRONT Premium Semi-Loaded Red Coated Caliper Pair + Hardware Kit [Left & Right]. Z
But is the warranty written on the box?
:P
I could stick my head up a butcher's.....HAHAHAHA
Quote from: sm105k on December 17, 2018, 10:03:27 AM
Quote from: 92BlackGT on December 17, 2018, 07:08:14 AM
Quote from: ZSHO on December 16, 2018, 08:10:45 AM
Callahan Brake Parts
Callahan CCK03712 FRONT Premium Semi-Loaded Red Coated Caliper Pair + Hardware Kit [Left & Right]. Z
But is the warranty written on the box?
:P
I could stick my head up a butcher's.....HAHAHAHA
Yea Butcher's Ass. Lol. Z :D
https://www.youtube.com/embed/0slTBGBEf0g
I found a couple of good articles which makes for some good reading. Z :)
http://www.tomorrowstechnician.com/diagnosing-turbo-boost-and-leak-problems/ (http://www.tomorrowstechnician.com/diagnosing-turbo-boost-and-leak-problems/)
http://www.tomorrowstechnician.com/reflashing-reprogramming/ (http://www.tomorrowstechnician.com/reflashing-reprogramming/)
I ran into a really sweet looking 2012-SHO Today which ultimately led to a side by side conversation with a cool guy on the Highway causing traffic and mayhem behind Us..Lol...
I also wanted to take this opportunity to wish everyone here @ the E.B.P.F and beyond a Happy and Healthy Prosperous Holiday Season full of warmth and Joy. Z :xmas:
https://www.youtube.com/embed/9ZpJ4byhVLs
(https://i.imgur.com/8nDIXEah.png)
(https://i.imgur.com/vwGHBGQ.gif)
(https://i.imgur.com/8nDIXEah.png)
(https://uploads.tapatalk-cdn.com/20181224/d5c5ef401cdfbad5c1b440af0fcdd9be.gif)
Merry Christmas Eve! If my SHO could be a mistress...
Sent from my iPhone using Tapatalk
@AJPTurbo
For you bro... I know you will appreciate it..
(https://uploads.tapatalk-cdn.com/20181224/b2681c7b8a8d92d59ab0d9aeff5794e5.gif)
Sent from my iPhone using Tapatalk
Hoo Boy, LOL.
Merry Christmas Eve. Z :xmas:
(https://i.imgur.com/BeCkiU9h.jpg)
Sync performing scheduled system maintenance as designed and posted speed limits seem to be updated. Z :)
(https://i.imgur.com/JBTvivAh.jpg)
(https://i.imgur.com/bDixAcbh.jpg)
(https://i.imgur.com/Zjk6KSth.jpg)
(https://uploads.tapatalk-cdn.com/20181225/d4b5b3e1e5d033b4efb396d3b866bdbc.jpg)
Looks like I made Santa's nice list!
Sent from my iPhone using Tapatalk
The Sync screen scheduled system maintenance came on again and noticed the post speed limits are once updated since new battery install...
Before and after for comparison. Z :)
(https://i.imgur.com/nZLV5Pxh.jpg)
(https://i.imgur.com/bDixAcbh.jpg)
Around here, it's either warp 12 or snail mail speed. Posted speed limits are a "suggestion" LOL.
It seems Cali is enacting new laws for 2019! What else is new!! Z
Noisy is costly
Roads are to likely get quieter with a new noise law. That is the plan at least. Any owner of a car that features a loud exhaust or muffler system will receive a fine with no questions asked...
http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/ (http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/)
Quote from: ZSHO on January 06, 2019, 05:35:53 PM
It seems Cali is enacting new laws for 2019! What else is new!! Z
Noisy is costly
Roads are to likely get quieter with a new noise law. That is the plan at least. Any owner of a car that features a loud exhaust or muffler system will receive a fine with no questions asked...
http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/ (http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/)
You must drive an electric car! Anything that makes noise is against the law!
Sent from my iPhone using Tapatalk
Quote from: StealBlueSho on January 06, 2019, 05:55:09 PM
Quote from: ZSHO on January 06, 2019, 05:35:53 PM
It seems Cali is enacting new laws for 2019! What else is new!! Z
Noisy is costly
Roads are to likely get quieter with a new noise law. That is the plan at least. Any owner of a car that features a loud exhaust or muffler system will receive a fine with no questions asked...
http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/ (http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/)
You must drive an electric car! Anything that makes noise is against the law!
Sent from my iPhone using Tapatalk
True indeed! Its maybe a way to raise some of the lost revenue! Dunno. Z
(http://i65.tinypic.com/ru8jzn.jpg)
Quote from: ZSHO on January 06, 2019, 05:35:53 PM
It seems Cali is enacting new laws for 2019! What else is new!! Z
Noisy is costly
Roads are to likely get quieter with a new noise law. That is the plan at least. Any owner of a car that features a loud exhaust or muffler system will receive a fine with no questions asked...
http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/ (http://thenewswheel.com/new-year-new-road-laws-for-california-in-2019/)
Dumbest State ever.
Its bad enough dealing with Spam,but just received this latest update from Norton!! Z :minigunner:
2018 was an exceptional year, since many large retailers experienced a data breach. Here are just a few examples:
Amazon
Amazon notified customers
that due to a "technical glitch"
an unknown number of email addresses were exposed.
Newegg
According to Volexity, hackers
accessed credit card data of
Newegg customers who
completed transactions from
Aug 16th – Sept 18th.
Chegg
Hackers potentially accessed
the names, email addresses, shipping addresses, username,
and hashed password of
40 million users.
Under Armour®
Approximately 150 million
MyFitnessPalâ„¢ accounts
accessed.
Macy's
Hackers accessed Macy's
customers' first and last
names, addresses, phone
numbers, email addresses,
birth dates and debit and
credit card numbers with
expiration dates.
I spoke to a reliable source from Ford and adding or upgrading components not supported by Ford is highly not recommended! He would not go into further details. Z
https://ford.oemdtc.com/2531/replacing-upgrading-original-equipment-sync-navigation-system-components-is-not-supported-2008-2018-ford-lincoln-mercury
Sync 3
https://ford.oemdtc.com/3363/touchscreen-unresponsive-2016-2018-ford-lincoln-with-sync-3
I tapped into the rear view mirror on the Jeeeeep using my previous old Escort passport 8500-x50. Z
(https://i.imgur.com/hgdDllAh.jpg)
(https://i.imgur.com/8CKP4H3h.jpg)
New video from (FTM) on Think Twice Before Skipping the Car Wash This Winter! Rock salt and the elements! . Z
https://www.youtube.com/embed/rdWbtcsLmJA
New video from (FTM) on 2011-2017 Ford F-150 & Mustang 5.0L Coyote Engine: Spark Plug Replacement Procedure. Z
https://www.youtube.com/embed/s5ohxYbcjoA
JAN 14, 2019 | FORD MOTOR COMPANY PRESS RELEASE
ALL-NEW FORD EXPLORER GOES FASTER AND FURTHER WITH PERFORMANCE-TUNED ST AND NO-COMPROMISE HYBRID. Z :o. :ford:
https://performance.ford.com/enthusiasts/media-room/2019/01/explorerst.html?cks=432128850&emailid=FP_FASTNEWS
Hi guys, yeah I'm not dead. Just had a bunch of major changes. First sold our first home, and a new one out in the country, Now we have 3 acres of ground and no close neighbors and a little stream that runs in front of the house. Well after 2 months in the new house, remember we had lots of ran in July, well we got some flooding which damage the bridge some and driveway. It happened twice, yeah major stress. Parents, family, friends came thru in a big way, with bringing us stone and equipment and just help to get it fixed. Second was a big major decision on my part. I left my job of 30 years, yeah. After 30 years of night shift, my body was telling it was time. So in August I started a new job, daylight hours. I now work for WEIR SPM. They service the oil/gas industry. Right now I help reburbing iron, hope to move into the other part of the shop. I would be learning to rebuild the power units on frac trucks. I'll do this for couple years till I get the SHO paid for. Kris has been so thrilled to have me home at night not sleeping. I got depressed after a couple weeks on the new job, cause I saw how much family time I had missed over those many years. I'm good now. SHO got Livernois Corsa exhaust, sounds much better and quieter. The old Dynomax's actually rusted out in the inside of them. They are junk. SO that's it for now. Will try to get picks of the new house sometime. Just the new hours, seems time goes by faster.
Made it through the tough, now on to the fun! Welcome back :D
X2 -Welcome back Brian! Glad things are looking on the Up n Up! Btw did send you a Pm prior to the Holidays to make sure everything was okay on the home front. Z
New video from Brian (FTM) on a 2011-Edge PTU replacement and why they always fail. Z
https://youtu.be/Hqq792O9-ds
At least the cases have yet to split like they do on the SHO. LOL.
I was able to access and navigate through (Engineering Mode) in the Dash Display an 12.2 volts with the fairly new Odyssey extreme battery when compared to the previous Motorcraft BXT-65-850 which produced 11.8 Volts. Z :)
12.2 volts(https://i.imgur.com/SnGQwk6h.jpg?1)
11.8 volts(https://i.imgur.com/n3lk964h.jpg)
Not sure why, but readings for VPWR we get are 0.5V lower than when actually tested at the battery terminals. This is consistent.
So, actual voltage for the Odyssey should be around 12.7V (normal for AGM), and the Motorcraft at about 12.3V. Normally, one can attempt desulfation with 10A charge from a smart charger that works with AGM batteries. 2A and 6A are too low apparently to rejuvenate sulfated batteries.
Today During this sub zero cold weather went to my local Starbucks for a coffee and PIcked up a large Hot chocolate with whipped Cream for a lovely Crossing guard which ultimately put a smile on her face while doing my good deed for the day while Trying to break the Ice.LoL. Z :)
It appears the 2019 XSPORT R out! Z
https://shop.ford.com/inventory/explorer/results?zipcode=08822&Radius=20&modeltrim=Explorer_F27-SPORT&year=2019&fyear=2019&Order=Distance
Great new video by Brian (FTM) on which motor oil is better to use in these sub zero temps. Z
See Full synthetic motor oil flows better in sub-zero Chicago temps below.
https://youtu.be/6j2IP79XYyk
Wheels,Center caps,lug nuts & more! Z :ford:
[Click under Similar] For new Products.
https://performanceparts.ford.com/part/M-1012-MB?cks=432128850&emailid=FP_FASTNEWS
https://performanceparts.ford.com/performance-wheels/
(https://i.imgur.com/1tSDL4rm.jpg)
It seems the MOTORCRAFT SP-534 [CYFS-12-YT3] Spark plugs have a new revised part number and replaced by
MOTORCRAFT SP580 [CYFS-12-YT4] Iridium. Z
https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,ignition,spark+plug,7212 (https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,ignition,spark+plug,7212)
https://www.oemford.parts/oem-parts/ford-spark-plug-cyfs12yt4/?c=YT1mb3Jk (https://www.oemford.parts/oem-parts/ford-spark-plug-cyfs12yt4/?c=YT1mb3Jk)
(https://i.imgur.com/wnQjkUKh.jpg)
I wonder why the change?
Numerical and/or for inventory purposes?
Or an actual structural / design change in the product itself??
Sent from my SM-N950U using Tapatalk
Quote from: bpd1151 on February 10, 2019, 10:57:47 PM
I wonder why the change?
Numerical and/or for inventory purposes?
Or an actual structural / design change in the product itself??
Sent from my SM-N950U using Tapatalk
Dunno @ the moment! It could just be a part Supercession or maybe the new Ruthenium Technology has made its way! Z
https://www.ngksparkplugs.com/ruthenium-hx (https://www.ngksparkplugs.com/ruthenium-hx)
Has anyone seen this video!! Z :o :o
https://www.youtube.com/embed/Ufwfnwkx4d4
Quote from: ZSHO on February 12, 2019, 04:45:15 PM
Has anyone seen this video!! Z :o :o
https://www.youtube.com/embed/Ufwfnwkx4d4
Wish I had this cam when the dealer put 150+ miles on my SHO when I dropped it off for my motor mount squeaking...
I wouldn't necessarily chalk this up as "abuse" in the true sense.
It appears that the tech (post the alignment rack mind you) was simply taking the vehicle for a test drive.
Other than a rare romp on the accelerator, it seemed overall, that it was just a simple around the block test drive.
I fail to see the perceived issue by the person who uploaded the video to YouTube.
Sent from my SM-N950U using Tapatalk
I do see a lot of unprofessional attitude on the technician's part. Sadly it is a common phenomenon among service personnel wherever you go. They do it even with the client present, forget about when the client is absent ...
70 mph through neighborhood streets.
Hard braking at lights and with pedestrians present.
Stopping in the crosswalks.
Possibly not on handsfree while on the phone and driving.
Again, not uncommon. Just stuff you do NOT want to know happened with YOUR car.
Only got one thing to say to this guy. Try this in Germany, BRO, your a** will be handed to you so fast, you will wonder where the sunshine went.
Interestingly EcoboostSHO.com and TaurusSHO.com were both available... so registered both..
Thinking of creating a similar site as dragtimes but customized for SHOs... so you can sort by mods and tuners... dunno...something to do..
I wonder How these Mahle Turbos will Par up against the Oem Honeywells ! Z
$493.99 ea.
MAHLE Original exhaust-gas turbochargers are manufactured at production locations in Germany and Austria using modern, computer-controlled production machines to guarantee optimized precision to machine housing components made of aluminum and cast steel. Turbines are manufactured from high-temperature resistant materials and feature premium cast quality and precision balancing. This is the only way in which they can withstand extreme conditions in the long term.
To comply with very high quality standards in turbocharger production, a team of product and process engineers are permanently deployed to continue development in production, assembly, and test processes, such as high-speed machining, joining technology, coating with fluid and solid materials, or balancing.
Features & Benefits:
High-speed compressor wheels: provide greater balancing precision, optimized speed stability, and reduced running noise.
Double piston rings on rotor shaft: Reduce oil consumption and enhance protection against foreign particles.
Turbine housings made of high-tech materials: Achieve greater thermal stability and longevity.
Functionally process-controlled center housing: Attain progressive balancing of the rotor shaft, enhanced running performance, reduced abrasion, and less noise emission.
Electron-welded rotor shaft and wheels: Guarantee high strength.
https://www.rockauto.com/en/partsearch/?catalog=116&partnum=014TC24024000&a=avl10088000 (https://www.rockauto.com/en/partsearch/?catalog=116&partnum=014TC24024000&a=avl10088000)
Germans do make some good stuff...
Sent from my iPhone using Tapatalk
my Daily Thought:
Will my SHO Ever Be Right,
Will I ever learn how to Drive,
Will I go back to A late 60's Mustang.
Will this Mess ever get back together..?
Quote from: irondoor19 on March 11, 2019, 02:30:35 PM
my Daily Thought:
Will my SHO Ever Be Right,
Will I ever learn how to Drive,
Will I go back to A late 60's Mustang.
Will this Mess ever get back together..?
What the hell happened? Is your PI with the ATP turbos?
Short Recap:
Motor was leaking oil from the timing chain Cover,
we knew this, and also the tranny was leaking.
get it back to the dealer for warranty repair, THEN
ooops, your converter is more than toast,
ooops you broke the pump gear in the tranny.
Look at my OTHER posts from today, pics included...
when this is all done, i may have the lowest mile 2011 Engine Tranny Combo.?
Jim T
Quote from: irondoor19 on March 11, 2019, 02:52:26 PM
Short Recap:
Motor was leaking oil from the timing chain Cover,
we knew this, and also the tranny was leaking.
get it back to the dealer for warranty repair, THEN
ooops, your converter is more than toast,
ooops you broke the pump gear in the tranny.
Look at my posts from today, pics included...
Jim T
Do you have any idea on how much power you were putting down?
Sent from my iPhone using Tapatalk
Quote from: StealBlueSHO on March 11, 2019, 02:55:04 PM
Quote from: irondoor19 on March 11, 2019, 02:52:26 PM
Short Recap:
Motor was leaking oil from the timing chain Cover,
we knew this, and also the tranny was leaking.
get it back to the dealer for warranty repair, THEN
ooops, your converter is more than toast,
ooops you broke the pump gear in the tranny.
Look at my posts from today, pics included...
Jim T
Do you have any idea on how much power you were putting down?
Sent from my iPhone using Tapatalk
not sure if this was a result of the First Motor Combo or the last time i went to the track, (NEVER Made it as i junked it on the highway)
The last Dyno runs i did were from crucial performance:
MAX Power 396.51 Max Torque 484.42,
however we believe that the trans/Torque Converter Problems happened on the
street (from Abuse), NOT at the track. AND i have no one to blame but me.
Motor is running E30 Now and is pushing 530 Plus and 600 TQ (at the Motor),
but not sure how accurate that is. SO 5000 miles on the new motor so far.
Trans and the beef est torque converter they GOT.. two (2) more weeks plus assembly.
CERTAIN AUTOMAKERS SLACKING ON AUTOMATIC EMERGENCY BRAKING
Latest data shows seven car companies have equipped less than 20 percent of their cars with AEB. Z
MARCH 22, 2019 — Automakers are slowly equipping their new vehicles with automatic emergency braking (AEB) as they work toward meeting a voluntary deadline of September 1, 2022.
In place of mandating new vehicles come equipped with the technology, the National Highway Traffic Safety Administration (NHTSA) allowed 20 automakers to agree on a voluntary basis to meet the deadline.
Agreeing to meet the voluntary guidelines are Audi, BMW, Fiat Chrysler, Ford, General Motors, Honda, Hyundai, Jaguar Land Rover, Kia, Maserati, Mazda, Mercedes-Benz, Mitsubishi Motors, Nissan, Porsche, Subaru, Tesla Motors, Toyota, Volkswagen and Volvo.
NHTSA calls it a "voluntary commitment" by the 20 automakers to equip light-duty cars and trucks with a gross vehicle weight of 8,500 pounds or less with low-speed automatic emergency braking systems. The systems include forward collision warning and crash imminent braking to reduce rear-end collisions.
AEB uses radar, lidar (reflected laser light) and cameras for a forward collision warning system that gives a driver audio or visual warnings when a frontal crash is imminent. This is combined with crash imminent braking that automatically applies the brakes if the driver doesn't respond to the warnings.
According to the Insurance Institute for Highway Safety (IIHS), AEB technology has the potential to prevent 12,000 injuries and 28,000 crashes by 2025 if all the automakers meet the deadline.
http://m.carcomplaints.com/news/2019/automakers-automatic-emergency-braking.shtml (http://m.carcomplaints.com/news/2019/automakers-automatic-emergency-braking.shtml)
one step closer to auto driving cars....
cars will be obsolete. more like public transportation is the future, really, LOL.
AOC is the future. She will fix everything for us.
Quote from: Macgyver on March 27, 2019, 08:34:36 PM
AOC is the future. She will fix everything for us.
ALL HAIL AOC!
Quote from: Macgyver on March 27, 2019, 08:34:36 PM
AOC is the future. She will fix everything for us.
the one who grew up 5 miles from me in a higher class neighborhood, graduated from excellent schools but doesn't know her ass from her elbow? Preaches that her family struggled growing up financially in the Bronx when she grew up in a wealthy area of westchester county NY . Says we need to go green when we are living in the cleanest air in the world and thinks we can go without airplanes, cars and even cows cause they fart too much causing pollution. No nuclear energy , all solar and windmill Hmmm . Yup she's got my vote
LLPOF LOL
Quote from: SHOdded on March 28, 2019, 01:54:39 PM
LLPOF LOL
Everyone will be saying to their wives , hey darling is the wind blowing today?? I want to watch some tv! LOL
Quote from: 18SHO on March 28, 2019, 02:21:53 PM
Quote from: SHOdded on March 28, 2019, 01:54:39 PM
LLPOF LOL
Everyone will be saying to their wives , hey darling is the wind blowing today?? I want to watch some tv! LOL
LOLOL. What it if its Cloudy and windless ?
Greetings to everyone from Shanghai China ( Suzhou ) The business district . I feel like a five-year-old in a sea of adults speaking gibberish . 12 hour time difference so I'm having trouble getting 3 to 4 hours sleep a night . Got my hands on some local hooch so I'll give a bottle a shot tonight and see if that helps me sleep . Can't get any good projects in the US lately so I have to go overseas for work . Job is almost complete ( tomorrow )., Will be flying out Friday and will get home late Saturday night . Can't wait to get home to my own bed .
Safe travels!
New Video from Brian (FTM ) On Ford Electronic Throttle Body Failures. Z :)
https://youtu.be/8P3hOxDfCRo
Quote from: SHOdded on December 09, 2018, 07:12:57 PM
Too bad, the 850 was a solid alternative. You can get 720-750 CCA agm batteries from pretty much anyone tho.
I just bought a 850 last Tuesday for the 94 f150
Sent from my Pixel 2 XL using Tapatalk
So my neighbor drives by my house and I'm outside... he is in an Audi TT that has some work done but not much... and proceeds to tell me how fast it is, etc etc... it's an older Audi with 150K miles on it...
I'm going along with it, he is excited so I do the polite conversation bit... congrats, sounds good, they handle well, etc etc...
He then tells me it would "Leave your Taurus in the dust!" then goes on about how he knows I go to the track, which tracks I go to..to call him next time I go so he can show me how fast these Audi's are...
I am like..Hold the damn phone... wait what huh?
So I politely tell him it would probably be a good race, who knows...trying to deflect... He is my neighbor, usually a nice guy.. not trying to stir the pot further...
He himhaws about "there is no way"... so I tell him to park his German car and let me take him for a ride...
Needless to say.... his posturing about going to the track to show me how much faster his Audi is quickly dissipated...
The resulting "Holy Sh!t!" that expelled from his mouth when I punched it was worth the gas for sure...
Quote from: StealBlueSHO on April 06, 2019, 05:23:02 PM
So my neighbor drives by my house and I'm outside... he is in an Audi TT that has some work done but not much... and proceeds to tell me how fast it is, etc etc... it's an older Audi with 150K miles on it...
I'm going along with it, he is excited so I do the polite conversation bit... congrats, sounds good, they handle well, etc etc...
He then tells me it would "Leave your Taurus in the dust!" then goes on about how he knows I go to the track, which tracks I go to..to call him next time I go so he can show me how fast these Audi's are...
I am like..Hold the damn phone... wait what huh?
So I politely tell him it would probably be a good race, who knows...trying to deflect... He is my neighbor, usually a nice guy.. not trying to stir the pot further...
He himhaws about "there is no way"... so I tell him to park his German car and let me take him for a ride...
Needless to say.... his posturing about going to the track to show me how much faster his Audi is quickly dissipated...
The resulting "Holy Sh!t!" that expelled from his mouth when I punched it was worth the gas for sure...
You did him a big favor , saving of the embarrassment at the track and his own gas money. His car maybe on a good day would be a mid 13 second car unless there's some serious work done LOL
Quote from: 18SHO on April 06, 2019, 06:30:33 PM
Quote from: StealBlueSHO on April 06, 2019, 05:23:02 PM
So my neighbor drives by my house and I'm outside... he is in an Audi TT that has some work done but not much... and proceeds to tell me how fast it is, etc etc... it's an older Audi with 150K miles on it...
I'm going along with it, he is excited so I do the polite conversation bit... congrats, sounds good, they handle well, etc etc...
He then tells me it would "Leave your Taurus in the dust!" then goes on about how he knows I go to the track, which tracks I go to..to call him next time I go so he can show me how fast these Audi's are...
I am like..Hold the damn phone... wait what huh?
So I politely tell him it would probably be a good race, who knows...trying to deflect... He is my neighbor, usually a nice guy.. not trying to stir the pot further...
He himhaws about "there is no way"... so I tell him to park his German car and let me take him for a ride...
Needless to say.... his posturing about going to the track to show me how much faster his Audi is quickly dissipated...
The resulting "Holy Sh!t!" that expelled from his mouth when I punched it was worth the gas for sure...
You did him a big favor , saving of the embarrassment at the track and his own gas money. His car maybe on a good day would be a mid 13 second car unless there's some serious work done LOL
you should have had him on the hook for a case of beer and found a long deserted road..... make sure your trunk was empty before the race. This gives you plenty of room to haul his ego home.
Quote from: 76fomoco on April 06, 2019, 07:44:35 PM
Quote from: 18SHO on April 06, 2019, 06:30:33 PM
Quote from: StealBlueSHO on April 06, 2019, 05:23:02 PM
So my neighbor drives by my house and I'm outside... he is in an Audi TT that has some work done but not much... and proceeds to tell me how fast it is, etc etc... it's an older Audi with 150K miles on it...
I'm going along with it, he is excited so I do the polite conversation bit... congrats, sounds good, they handle well, etc etc...
He then tells me it would "Leave your Taurus in the dust!" then goes on about how he knows I go to the track, which tracks I go to..to call him next time I go so he can show me how fast these Audi's are...
I am like..Hold the damn phone... wait what huh?
So I politely tell him it would probably be a good race, who knows...trying to deflect... He is my neighbor, usually a nice guy.. not trying to stir the pot further...
He himhaws about "there is no way"... so I tell him to park his German car and let me take him for a ride...
Needless to say.... his posturing about going to the track to show me how much faster his Audi is quickly dissipated...
The resulting "Holy Sh!t!" that expelled from his mouth when I punched it was worth the gas for sure...
You did him a big favor , saving of the embarrassment at the track and his own gas money. His car maybe on a good day would be a mid 13 second car unless there's some serious work done LOL
you should have had him on the hook for a case of beer and found a long deserted road..... make sure your trunk was empty before the race. This gives you plenty of room to haul his ego home.
Ha! Not gonna lie.. the thought crossed my mind.. but I have to make nice with people around me..
BJ's a big soft teddy bear at heart.
Darn. So cute of him.
Sent from my SM-N950U using Tapatalk
Quote from: bpd1151 on April 06, 2019, 08:09:15 PM
BJ's a big soft teddy bear at heart.
Darn. So cute of him.
Sent from my SM-N950U using Tapatalk
Hey now! I'm a rough son of a B! But I agree with the cute part :-P
Sent from my iPhone using Tapatalk
Quote from: StealBlueSHO on April 06, 2019, 05:23:02 PM
So my neighbor drives by my house and I'm outside... he is in an Audi TT that has some work done but not much... and proceeds to tell me how fast it is, etc etc... it's an older Audi with 150K miles on it...
I'm going along with it, he is excited so I do the polite conversation bit... congrats, sounds good, they handle well, etc etc...
He then tells me it would "Leave your Taurus in the dust!" then goes on about how he knows I go to the track, which tracks I go to..to call him next time I go so he can show me how fast these Audi's are...
I am like..Hold the damn phone... wait what huh?
So I politely tell him it would probably be a good race, who knows...trying to deflect... He is my neighbor, usually a nice guy.. not trying to stir the pot further...
He himhaws about "there is no way"... so I tell him to park his German car and let me take him for a ride...
Needless to say.... his posturing about going to the track to show me how much faster his Audi is quickly dissipated...
The resulting "Holy Sh!t!" that expelled from his mouth when I punched it was worth the gas for sure...
I drive other cars from time to time. They are quick. Then the other day I had the wife out in the AJP E30 tuned 2015. Floored it at a light change intersection thingy since it was actually warmish pavement. Tires were warm. Cool temp but the sun was out in full force. She Went "Holy Crap!. It wasnt like this when we bought it". I didn't know she was that observant.
Quote from: 76fomoco on April 06, 2019, 07:44:35 PM
Quote from: 18SHO on April 06, 2019, 06:30:33 PM
Quote from: StealBlueSHO on April 06, 2019, 05:23:02 PM
So my neighbor drives by my house and I'm outside... he is in an Audi TT that has some work done but not much... and proceeds to tell me how fast it is, etc etc... it's an older Audi with 150K miles on it...
I'm going along with it, he is excited so I do the polite conversation bit... congrats, sounds good, they handle well, etc etc...
He then tells me it would "Leave your Taurus in the dust!" then goes on about how he knows I go to the track, which tracks I go to..to call him next time I go so he can show me how fast these Audi's are...
I am like..Hold the damn phone... wait what huh?
So I politely tell him it would probably be a good race, who knows...trying to deflect... He is my neighbor, usually a nice guy.. not trying to stir the pot further...
He himhaws about "there is no way"... so I tell him to park his German car and let me take him for a ride...
Needless to say.... his posturing about going to the track to show me how much faster his Audi is quickly dissipated...
The resulting "Holy Sh!t!" that expelled from his mouth when I punched it was worth the gas for sure...
You did him a big favor , saving of the embarrassment at the track and his own gas money. His car maybe on a good day would be a mid 13 second car unless there's some serious work done LOL
you should have had him on the hook for a case of beer and found a long deserted road..... make sure your trunk was empty before the race. This gives you plenty of room to haul his ego home.
NO NO NO NO! NO MERCY AT THE END OF THE BLADE! People like that need the GAP BAND played for them. Should have lined them up, and drove straight out of his life.
I noticed the past week that my MPG has increased a bit and it seems the Transition to Summer-blend Fuel is maybe Upon us ahead of schedule! Dunno! Z
https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3 (https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3)
Quote from: ZSHO on April 13, 2019, 08:06:11 PM
I noticed the past week that my MPG has increased a bit and it seems the Transition to Summer-blend Fuel is maybe Upon us ahead of schedule! Dunno! Z
https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3 (https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3)
Hell yea fellow NYer , maybe that's why my gas milege running E30 seems to be as good if not better since the switch over from 93 last week. Along with like 50 horsepower more that is lol
Quote from: 18SHO on April 13, 2019, 10:31:30 PM
Quote from: ZSHO on April 13, 2019, 08:06:11 PM
I noticed the past week that my MPG has increased a bit and it seems the Transition to Summer-blend Fuel is maybe Upon us ahead of schedule! Dunno! Z
https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3 (https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3)
Hell yea fellow NYer , maybe that's why my gas milege running E30 seems to be as good if not better since the switch over from 93 last week. Along with like 50 horsepower more that is lol
E30 FOR LIFE!
Quote from: SM105K on April 15, 2019, 10:32:18 AM
Quote from: 18SHO on April 13, 2019, 10:31:30 PM
Quote from: ZSHO on April 13, 2019, 08:06:11 PM
I noticed the past week that my MPG has increased a bit and it seems the Transition to Summer-blend Fuel is maybe Upon us ahead of schedule! Dunno! Z
https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3 (https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3)
Hell yea fellow NYer , maybe that's why my gas milege running E30 seems to be as good if not better since the switch over from 93 last week. Along with like 50 horsepower more that is lol
E30 FOR LIFE!
Dang that much huh? 50hp?
Quote from: 802SHO on April 15, 2019, 02:55:30 PM
Quote from: SM105K on April 15, 2019, 10:32:18 AM
Quote from: 18SHO on April 13, 2019, 10:31:30 PM
Quote from: ZSHO on April 13, 2019, 08:06:11 PM
I noticed the past week that my MPG has increased a bit and it seems the Transition to Summer-blend Fuel is maybe Upon us ahead of schedule! Dunno! Z
https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3 (https://www.reuters.com/article/us-usa-gasoline-summer-idUSKBN1GX2O3)
Hell yea fellow NYer , maybe that's why my gas milege running E30 seems to be as good if not better since the switch over from 93 last week. Along with like 50 horsepower more that is lol
E30 FOR LIFE!
Dang that much huh? 50hp?
All day, it is the tq that is really amazing.
Most SHO's stock put out 300/300 to the tire correct? Mine K&N Filter and colder plugs put 391/470.
So +91 hp and +170 tq just with the E30 tune.
Stock AWHP ranges anywhere from 277 to 285.
I forgot what the stock TQ #'s though
Have to go sift through old paperwork.
Sent from my SM-N950U using Tapatalk
Quote from: bpd1151 on April 15, 2019, 04:07:32 PM
Stock AWHP ranges anywhere from 277 to 285.
I forgot what the stock TQ #'s though
Have to go sift through old paperwork.
Sent from my SM-N950U using Tapatalk
Makes it even more remarkable.
Quote from: bpd1151 on April 15, 2019, 04:07:32 PM
Stock AWHP ranges anywhere from 277 to 285.
I forgot what the stock TQ #'s though
Have to go sift through old paperwork.
Sent from my SM-N950U using Tapatalk
2016+ are closer to 300hp to the tire stock.
Sent from my iPhone using Tapatalk
I have been trying to troubleshoot this A/C ISSUE for the past few days but to no avail! The A/C started to work after having the System Evacuated and Recharged but unfortunately lasted for a couple of days.
Installed new Relays and Fuses inside the (BJB) as per being OCD .
I think with the A/C Fully Charged the inside Vent should be between 35-45 degrees,but during sustained Drive it should be closer to 36-37 degrees!
I know ultimately its a sliding Scale relative to Humidity and on average the Evaporator runs close to 32,out the Center Vent and can go Up to 45 deg IIRC correctly!
I did find 1 middle Vent and 1 side vent on Dash closed Today to my surprise and while Fully opening them up,the A/C seems to be functioning properly after a quick Drive on the Highway with Temps in the middle 70's. Fingers crossed and will keep you updated on any ongoing progress. Z
Good luck! Closed vents should not affect performance unless charge is low. Check with black light for leaks.
Sirius Satellite Radio With 4G TCU Modem – Loss Of Signal/Acquiring Signal Message Displayed – 2018-2019 Ford Explorer. Z
APRIL 9 2019
https://ford.oemdtc.com/4322/sirius-satellite-radio-with-4g-tcu-modem-loss-of-signal-acquiring-signal-message-displayed-2018-2019-ford-explorer
https://drive.google.com/file/d/1lnoofk61Il-JAGW1xLGh_1ncczFJBl8H/view?usp=drivesdk
I read in a topic on the SHOForum that when upgrading HPFP model year 2010-12 also must upgrade injectors opposed to 2013+ don't need to upgrade injectors. True? I'm considering HPFP and ran into this topic. In which case my goal would be derailed, and first step would be injectors?
Injectors are a final step. Having an upgraded HPFP is more important. Not sure who aside from bpd has the DW upgrades planned/installed. Bpd always plans headroom into his projects, so upgraded injectors are a natural result. Fuel pumps though are the bigger piece of the puzzle, especially with higher E blends, as the energy density drops significantly, and only volume can compensate.
Ok cool! It read on the other forum or atleast I interpreted it as injectors were a requirement per 2010-12. Thank you for the clarification Sir!
IIRC, the HPFP maxes out around 2500 psi for gen 4, 3000 for gen 5. Injectors have never really been an issue re flow rates. But if you are pushing the envelope, can't hurt to upgrade.
FoMoCoSHO has pushed hard with Eblends for some time now, both gen 4 and 5, and has yet to upgrade the fuel system at all. More details, he will have to provide.
How good your tuner is ... That seems to be the limiting factor really.
Quote from: SHOdded on April 20, 2019, 10:56:19 AM
IIRC, the HPFP maxes out around 2500 psi for gen 4, 3000 for gen 5. Injectors have never really been an issue re flow rates. But if you are pushing the envelope, can't hurt to upgrade.
FoMoCoSHO has pushed hard with Eblends for some time now, both gen 4 and 5, and has yet to upgrade the fuel system at all. More details, he will have to provide.
How good your tuner is ... That seems to be the limiting factor really.
I agree with this. Your tuner / AJP will max out what you have and keep the OEM Fuel pump pressure within its limits.
I have awesome 93, E30, and E85 tunes from him. I am sure the car can do more with more rail pressure but those new fuel pumps are out of my price range atm.
Here's a great article I came across and not sure if this was covered!
Fount of Info indeed! Z
https://www.motor.com/magazine-summary/dissecting-fords-ecoboost-engine/ (https://www.motor.com/magazine-summary/dissecting-fords-ecoboost-engine/)
New video from Brian (FTM) on Ford All Wheel Drive Vehicles:
Critical PTU Fluid Exchange Procedure
recommended every 30K Miles.
It still makes me laugh that Ford recommends to change it @ 100K mile intervals!!! Z
https://www.youtube.com/embed/sS9JPaf1MDg
Ford Is Under Criminal Investigation for Emissions-Testing Program. Z
https://www.consumerreports.org/fuel-economy-efficiency/ford-emissions-under-criminal-investigation/ (https://www.consumerreports.org/fuel-economy-efficiency/ford-emissions-under-criminal-investigation/)
https://www.google.com/amp/s/www.automobilemag.com/news/ford-fuel-economy-testing-investigation-us-justice-department/amp/ (https://www.google.com/amp/s/www.automobilemag.com/news/ford-fuel-economy-testing-investigation-us-justice-department/amp/)
This has been looming for quite a while.
Just now getting media attention.
Sent from my SM-N950U using Tapatalk
I will not be giving me SHO back... they can go pound sand...
Agreed!!!
Sent from my SM-N950U using Tapatalk
Quote from: ZSHO on April 27, 2019, 08:02:34 PM
Ford Is Under Criminal Investigation for Emissions-Testing Program. Z
https://www.consumerreports.org/fuel-economy-efficiency/ford-emissions-under-criminal-investigation/ (https://www.consumerreports.org/fuel-economy-efficiency/ford-emissions-under-criminal-investigation/)
https://www.google.com/amp/s/www.automobilemag.com/news/ford-fuel-economy-testing-investigation-us-justice-department/amp/ (https://www.google.com/amp/s/www.automobilemag.com/news/ford-fuel-economy-testing-investigation-us-justice-department/amp/)
I have to smog my car in June. Going to be funny to roll in on straight race fuel and pass emissions with zero issues.
I Don't mind if they compensate me with a Brand spankin new SHO in RED of course! Lol. Z :D
Quote from: ZSHO on April 29, 2019, 10:43:38 AM
I Don't mind if they compensate me with a Brand spankin new SHO in RED of course! Lol. Z
Hmm maybe if they pay as well to swap over all your performance parts? You have quite a bit invested into yours...
Quote from: StealBlueSHO on April 29, 2019, 10:46:41 AM
Quote from: ZSHO on April 29, 2019, 10:43:38 AM
I Don't mind if they compensate me with a Brand spankin new SHO in RED of course! Lol. Z
Hmm maybe if they pay as well to swap over all your performance parts? You have quite a bit invested into yours...
Come on now Z, they aren't VW!
Quote from: StealBlueSHO on April 29, 2019, 10:46:41 AM
Quote from: ZSHO on April 29, 2019, 10:43:38 AM
I Don't mind if they compensate me with a Brand spankin new SHO in RED of course! Lol. Z
Hmm maybe if they pay as well to swap over all your performance parts? You have quite a bit invested into yours...
True indeed! Mods are documented with receipts and all!
August will be 6 years with 64K on the OD! Dunno! Z
To the ^^^ So many Good memories with the Redhead and still have the Original Key Fob untouched and Vehicle Build certificate etc as memorabilia and a Best Trap Speed of 115.54 mph last Fall! She's a Keeper! Z :)
(https://i.imgur.com/WO0Q37Zh.jpg)
(https://i.imgur.com/U6EG10wh.jpg?1)
Ah, nostalgia!
FWIW, I went from beating any "EPA" fuel economy rating in the '80's-'00's to being lucky to be able to achieve the rated fuel economy. I think all manufacture's have been basically stretching the truth since 2010 or so. As a family, we've owned a bunch of stuff so I truly think it's all brands.
Swapped out my winter wheels today and noticed something peculiar. Is it just me, or is one pipe lower than it should be?
I don't remember there being that much "flex" in the flex pipe to the front cat...
(https://uploads.tapatalk-cdn.com/20190504/a5dcb977a216608a635a7017d4fe5b81.jpg)
Sent from my iPhone using Tapatalk
Quote from: MiWiAu on May 04, 2019, 03:10:19 PM
Swapped out my winter wheels today and noticed something peculiar. Is it just me, or is one pipe lower than it should be?
I don't remember there being that much "flex" in the flex pipe to the front cat...
(https://uploads.tapatalk-cdn.com/20190504/a5dcb977a216608a635a7017d4fe5b81.jpg)
Sent from my iPhone using Tapatalk
It could be the Rubber Insulator which holds the Flex pipe in place! Z
https://fordpartsgiant.com/parts/ford-insulator-rubber_5f9z-5f262-aa.html?Make=Ford&Model=Explorer&Year=2013&Submodel=&Filter=(30275)
Quote from: ZSHO on May 04, 2019, 04:14:08 PM
Quote from: MiWiAu on May 04, 2019, 03:10:19 PM
Swapped out my winter wheels today and noticed something peculiar. Is it just me, or is one pipe lower than it should be?
I don't remember there being that much "flex" in the flex pipe to the front cat...
(https://uploads.tapatalk-cdn.com/20190504/a5dcb977a216608a635a7017d4fe5b81.jpg)
Sent from my iPhone using Tapatalk
It could be the Rubber Insulator which holds the Flex pipe in place! Z
https://fordpartsgiant.com/parts/ford-insulator-rubber_5f9z-5f262-aa.html?Make=Ford&Model=Explorer&Year=2013&Submodel=&Filter=(30275)
I'm hoping this is just another dealer screw up from when they pulled my engine for the timing chain replacement. I'll try to loosen everything up and re-clock the pipe to see if I can get it straight before buying additional parts.
Thanks for the heads up! :)
Sent from my iPhone using Tapatalk
Luckily, I was able to just loosen the flange bolts at the cat, lift the pipe into place, and retighten the flange. Seems to be correct now. Glad I caught it before ripping. It off on a curb. :) #attentiontodetail
(https://uploads.tapatalk-cdn.com/20190504/a3505f05153bfe461d73d35a399c5b3c.jpg)
Sent from my iPhone using Tapatalk
Quote from: MiWiAu on May 04, 2019, 04:38:56 PM
Luckily, I was able to just loosen the flange bolts at the cat, lift the pipe into place, and retighten the flange. Seems to be correct now. Glad I caught it before ripping. It off on a curb. :) #attentiontodetail
(https://uploads.tapatalk-cdn.com/20190504/a3505f05153bfe461d73d35a399c5b3c.jpg)
Sent from my iPhone using Tapatalk
It sounds like the Bolts were recently removed by the dealer! Mine were a Pita to remove! Glad you caught it in time. Z :)
TURBO MOUNTING STUD FORD W712829S900 $3.47
FORD W714265S441 M-10 NUT $1.54
I found Doublegasketing to be ideal for Exhaust leaks. Z
https://www.rockauto.com/en/parts/ford,W712829S900,stud,1000805 (https://www.rockauto.com/en/parts/ford,W712829S900,stud,1000805)
https://www.rockauto.com/en/parts/ford,W714265S441,nut,1000377 (https://www.rockauto.com/en/parts/ford,W714265S441,nut,1000377)
(https://i.imgur.com/uhRwxweh.jpg?1)
(https://i.imgur.com/ztbGDB2h.jpg?1)
FORD AA5Z6L612A GASKET $11.04
https://www.rockauto.com/en/partsearch/?partnum=AA5Z6L612A (https://www.rockauto.com/en/partsearch/?partnum=AA5Z6L612A)
(https://i.imgur.com/hpR9CHqh.jpg)
FORD 7T4Z9450AA Pipe Flange Gasket / Seal $7.31
https://www.rockauto.com/en/partsearch/?partnum=7T4Z9450AA (https://www.rockauto.com/en/partsearch/?partnum=7T4Z9450AA)
(https://i.imgur.com/YKyj6Rih.jpg)
I have been having a Frustrating Code C1B00 for many years now and the Ford dealer was never able to remedy this condition even after changing the wheel hubs (bearings) new metal updated thrust washers etc under warranty but to no avail!
Since having my Brakes changed well over a month ago found the Front Calipers Binding and used a Dremel tool kit to remove the excess rust corrosion buildup and fortunately until this day the dreaded Code has not returned! Dunno!
I am one Happy Camper thus far! Fingers crossed. Z
https://www.ecoboostperformanceforum.com/index.php/topic,9778.15.html (https://www.ecoboostperformanceforum.com/index.php/topic,9778.15.html)
So many electrical connections and reference points! Hope you found the culprit, or at least moved on to the next one in line LOL.
Quote from: SHOdded on May 09, 2019, 04:52:46 PM
So many electrical connections and reference points! Hope you found the culprit, or at least moved on to the next one in line LOL.
The complexity of being OCD! Lol. Z :D
I treated the Redhead to some TLC yesterday not knowing it was going to rain today! Oh well! Z
(https://i.imgur.com/8NxRC1Yh.jpg)
(https://i.imgur.com/txWTpTnh.jpg)
Quote from: ZSHO on May 10, 2019, 06:14:08 PM
I treated the Redhead to some TLC yesterday not knowing it was going to rain today! Oh well! Z
(https://i.imgur.com/8NxRC1Yh.jpg)
(https://i.imgur.com/txWTpTnh.jpg)
Looks soooo glossy! Like glass!
so love the redheads!!! taking my albino to the track tomorrow with AJP 93 w meth.... will see what she turns. Brand has been so much fun to work with.
Quote from: 76fomoco on May 11, 2019, 12:01:01 AM
so love the redheads!!! taking my albino to the track tomorrow with AJP 93 w meth.... will see what she turns. Brand has been so much fun to work with.
Are we done? Sorry can't remember avatars and real names! Too many! Always excited to hear how a meth tune will run at the track.
https://www.usnews.com/news/economy/articles/2019-05-20/ford-to-lay-off-7k-workers-in-effort-to-cut-costs (https://www.usnews.com/news/economy/articles/2019-05-20/ford-to-lay-off-7k-workers-in-effort-to-cut-costs) . Z :(
Yeah, inevitable unfortunately. With the shakeup of the way Ford does business, there had to be fallout. Let's see where it settles.
Sirius-xm Travel link Free until Memorial day weekend! :usa: Enjoy. Z :)
FYI- I will be maybe selling my Airaid intake soon,which includes Both a Dry & Oiled Filter for added convenience and an Updated seal! Pic below. TIA. Z
(https://i.imgur.com/9mtUcvKh.jpg)
:o
Quote from: SHOdded on May 29, 2019, 06:19:30 PM
:o
It seems Mike is on the finishing stages of his newly released intake! Z :)
(https://i.imgur.com/3cShmx4h.png)
Looks like he is building them for a steam locomotive LOL. So ... many ...
THE COOL WORLD ARTICLE! Z :)
CSF x Gearhead Develop the Ultimate Intercooler for the Ford Taurus SHO
The Gateway Mod to BIG POWER!
May 28, 2019
http://csfrace.com/csf-x-gearhead-develop-the-ultimate-intercooler-for-the-ford-taurus-sho/ (http://csfrace.com/csf-x-gearhead-develop-the-ultimate-intercooler-for-the-ford-taurus-sho/)
https://www.ghtuning.com/product/2010-2018-sho-flex-performance-intercooler/ (https://www.ghtuning.com/product/2010-2018-sho-flex-performance-intercooler/)
https://www.autoblog.com/2009/06/10/2010-ford-taurus-sho-named-i-esquire-i-car-of-the-year/ (https://www.autoblog.com/2009/06/10/2010-ford-taurus-sho-named-i-esquire-i-car-of-the-year/)
Quote from: ZSHO on May 30, 2019, 06:50:50 PM
COOL ARTICLE FOR ANY CAR ENTHUSIAST! Z :)
CSF x Gearhead Develop the Ultimate Intercooler for the Ford Taurus SHO
THE COOL WORLD
CSF x Gearhead Develop the Ultimate Intercooler for the Ford Taurus SHO
The Gateway Mod to BIG POWER!
http://csfrace.com/csf-x-gearhead-develop-the-ultimate-intercooler-for-the-ford-taurus-sho/ (http://csfrace.com/csf-x-gearhead-develop-the-ultimate-intercooler-for-the-ford-taurus-sho/)
https://www.ghtuning.com/product/2010-2018-sho-flex-performance-intercooler/ (https://www.ghtuning.com/product/2010-2018-sho-flex-performance-intercooler/)
https://www.autoblog.com/2009/06/10/2010-ford-taurus-sho-named-i-esquire-i-car-of-the-year/ (https://www.autoblog.com/2009/06/10/2010-ford-taurus-sho-named-i-esquire-i-car-of-the-year/)
Great read
Definitely my next mod!
Sent from my SM-N960U using Tapatalk
Hawk Performance HB674F.664 HPS Brake Pad13+SHO REAR PADS. Z
$29.92 & FREE Shipping(https://i.imgur.com/Ij4gDuhh.jpg)
(https://i.imgur.com/uHLOHcJh.jpg)
https://www.amazon.com/Hawk-Performance-HB674F-664-HPS-Brake/dp/B0067EF2IS/ref=sr_1_1?keywords=Hawk+Performance+HB674F.664+HPS+Brake+Pad&qid=1560038458&s=gateway&sr=8-1 (https://www.amazon.com/Hawk-Performance-HB674F-664-HPS-Brake/dp/B0067EF2IS/ref=sr_1_1?keywords=Hawk+Performance+HB674F.664+HPS+Brake+Pad&qid=1560038458&s=gateway&sr=8-1)
Random thought of the day.... maybe time to sell off the SHO and grab something different.....
Sent from my iPhone using Tapatalk
Quote from: StealBlueSHO on June 08, 2019, 08:28:50 PM
Random thought of the day.... maybe time to sell off the SHO and grab something different.....
Sent from my iPhone using Tapatalk
Hmm why the change of heart! Z ???
Ah yes, the 7 month itch :D
Oh here is one for you guys to scratch you head on. Yesterday was local car group race at BSD, plus Jensen race. Well my car was still in showfield mode, mean stock air box installed. Well first pass of the day was 12.41, then next was 12.44, with mid to high 1.7 60fts again. Im going great, swapped back in the Airaid, mistake. 12.52, with mid 1.8s 60fts. Ok, now Im confused. We do our group race, I was 1 for 3, left the Airaid i and delt with it. So open time shots for Jensen race, I swap the stock box back in, and did 3 back to back passes. 12.44 12.40, 12.37, yeah interesting. 60fts were back into the 1.7s again. Yeah really confused, but numbers dont like. DA was normal gor BSD at 2300. In beginning of May, I raced and was running mid 12.5s with the Airaid. So seems my new setup likes the stock air box alot better.
Also a side note, while doing the 3 back to back passes, I did get to look at AIT2 while going thru the traps. AIT1 read 80, AIT2 read 60. I was thrilled at that. Meth and GH intercooler are def a good combination.
Yesh lost first round in the Jensen race, driver was getting tired. Long day at the track, dial to high and broke out my .003. Oh well. They better be ready for the next one, I def will be.
Quote from: bamsho on June 09, 2019, 06:52:44 AM
Oh here is one for you guys to scratch you head on. Yesterday was local car group race at BSD, plus Jensen race. Well my car was still in showfield mode, mean stock air box installed. Well first pass of the day was 12.41, then next was 12.44, with mid to high 1.7 60fts again. Im going great, swapped back in the Airaid, mistake. 12.52, with mid 1.8s 60fts. Ok, now Im confused. We do our group race, I was 1 for 3, left the Airaid i and delt with it. So open time shots for Jensen race, I swap the stock box back in, and did 3 back to back passes. 12.44 12.40, 12.37, yeah interesting. 60fts were back into the 1.7s again. Yeah really confused, but numbers dont like. DA was normal gor BSD at 2300. In beginning of May, I raced and was running mid 12.5s with the Airaid. So seems my new setup likes the stock air box alot better.
Also a side note, while doing the 3 back to back passes, I did get to look at AIT2 while going thru the traps. AIT1 read 80, AIT2 read 60. I was thrilled at that. Meth and GH intercooler are def a good combination.
Yesh lost first round in the Jensen race, driver was getting tired. Long day at the track, dial to high and broke out my .003. Oh well. They better be ready for the next one, I def will be.
Damn....has this info been shared before about stock air box? I don't recall someone doing swaps at the track with an Airaid or equivalent intake.....thats some really great info and clearly the stock air box is wayyy better than the hot air intakes a lot of us have.
Thank you for sharing. I love the hood open look of my Airaid...but numbers don't lie....Ill be buying a k&N filter and dropping the stock air box back in for track day....maybe every day!
Again...awesome info and thanks for sharing!!!
Yeah Rich Yaklin did a test years back. He did Mdesign, stock, Airaid. They were all in within less than a tenth. With old IC, car never ran a 12.3 time in June. It was always in October.
I think it has to do with cfm. More cfm is not always better. Might be pushing other components such an sensors and probably the tune past their limits. I would think if the system is looked at in totality, with a tune correction, the Airaid would win.
But this is great news for those wanting to retain the stock box :). Maybe a k&n dropin can be tested next time!
Quote from: ZSHO on June 08, 2019, 08:37:41 PM
Quote from: StealBlueSHO on June 08, 2019, 08:28:50 PM
Random thought of the day.... maybe time to sell off the SHO and grab something different.....
Sent from my iPhone using Tapatalk
Hmm why the change of heart! Z ???
I might be interested in an ecoboost raptor....
Sent from my iPhone using Tapatalk
Quote from: StealBlueSHO on June 08, 2019, 08:28:50 PM
Random thought of the day.... maybe time to sell off the SHO and grab something different.....
Sent from my iPhone using Tapatalk
C'mon for the love of God lmfao
Quote from: SHOdded on June 09, 2019, 08:45:51 AM
I think it has to do with cfm. More cfm is not always better. Might be pushing other components such an sensors and probably the tune past their limits. I would think if the system is looked at in totality, with a tune correction, the Airaid would win.
But this is great news for those wanting to retain the stock box :). Maybe a k&n dropin can be tested next time!
Would be nice once the EPP intake is finished to get some numbers. See how it affects intake temps and flow. Might see more than a tenth of a difference. See where it stacks up in the world of our intakes.
It's supposed to decrease WGDC by roughly 8% as well.
Quote from: StealBlueSHO on June 09, 2019, 08:50:15 AM
Quote from: ZSHO on June 08, 2019, 08:37:41 PM
Quote from: StealBlueSHO on June 08, 2019, 08:28:50 PM
Random thought of the day.... maybe time to sell off the SHO and grab something different.....
Sent from my iPhone using Tapatalk
Hmm why the change of heart! Z ???
I might be interested in an ecoboost raptor....
Sent from my iPhone using Tapatalk
Have you ever driven one? The only way I can describe it, is to take a kitchen chair and place it on top of your bed. Then try to sit on it. They are awesome trucks but they have so much suspension travel it feels odd cornering. Especially coming from a car that handles ok and reacts decent.
Quote from: shoNoff on June 09, 2019, 09:36:13 AM
Quote from: StealBlueSHO on June 09, 2019, 08:50:15 AM
Quote from: ZSHO on June 08, 2019, 08:37:41 PM
Quote from: StealBlueSHO on June 08, 2019, 08:28:50 PM
Random thought of the day.... maybe time to sell off the SHO and grab something different.....
Sent from my iPhone using Tapatalk
Hmm why the change of heart! Z ???
I might be interested in an ecoboost raptor....
Sent from my iPhone using Tapatalk
Have you ever driven one? The only way I can describe it, is to take a kitchen chair and place it on top of your bed. Then try to sit on it. They are awesome trucks but they have so much suspension travel it feels odd cornering. Especially coming from a car that handles ok and reacts decent.
Not yet, dealerships are not letting people walk in and drive one.... around here anyway...
Looking around for a used one that I can test drive.
Also looking at a Tahoe as well... one of my favorite all time vehicles I owned was an 04 Tahoe LT w/autoride... had every option... 167K miles and still sounded like a well running sewing machine..
Sent from my iPhone using Tapatalk
Quote from: bamsho on June 09, 2019, 08:09:08 AM
Yeah Rich Yaklin did a test years back. He did Mdesign, stock, Airaid. They were all in within less than a tenth. With old IC, car never ran a 12.3 time in June. It was always in October.
God this make my decision between i/c and hpfp even harder. I can't do both this year it's one or the other.
Quote from: StealBlueSHO on June 09, 2019, 09:39:48 AM
Quote from: shoNoff on June 09, 2019, 09:36:13 AM
Quote from: StealBlueSHO on June 09, 2019, 08:50:15 AM
Quote from: ZSHO on June 08, 2019, 08:37:41 PM
Quote from: StealBlueSHO on June 08, 2019, 08:28:50 PM
Random thought of the day.... maybe time to sell off the SHO and grab something different.....
Sent from my iPhone using Tapatalk
Hmm why the change of heart! Z ???
I might be interested in an ecoboost raptor....
Sent from my iPhone using Tapatalk
Have you ever driven one? The only way I can describe it, is to take a kitchen chair and place it on top of your bed. Then try to sit on it. They are awesome trucks but they have so much suspension travel it feels odd cornering. Especially coming from a car that handles ok and reacts decent.
Not yet, dealerships are not letting people walk in and drive one.... around here anyway...
Looking around for a used one that I can test drive.
Also looking at a Tahoe as well... one of my favorite all time vehicles I owned was an 04 Tahoe LT w/autoride... had every option... 167K miles and still sounded like a well running sewing machine..
Sent from my iPhone using Tapatalk
I haven't driven an ecoboost one. So they may be different. A buddy of mine bought a 6.2 raptor to tow his race car. He had it 2 years and got rid of it for an f-350. He ended up buying a bigger enclosed trailer and raptor couldn't tow it. He was an idiot though you don't buy a raptor to tow with.
Quote from: shoNoff on June 09, 2019, 09:40:53 AM
Quote from: bamsho on June 09, 2019, 08:09:08 AM
Yeah Rich Yaklin did a test years back. He did Mdesign, stock, Airaid. They were all in within less than a tenth. With old IC, car never ran a 12.3 time in June. It was always in October.
God this make my decision between i/c and hpfp even harder. I can't do both this year it's one or the other.
Very hard indeed. We all need both. They go hand in hand for sure. It's easier for me to go without the HPFP in the interim because I have meth.
Meth+IC would be roughly 1,700. Hope that doesn't make your decision MORE complicated
The ECU wants to pull fuel bc it doesnt know Meth exists.....so even after reducing my volume of Meth it still just pulls a little fuel......so if I had the HPFP right now...so long as I'm still spraying Meth it would continue to cut some fuel.
Yea, if I sell the SHO it would have to be private party... most likely to someone in the community. No dealer is gonna want to take a trade on something that has been modified to the extent of mine. Not matter how good it runs/looks.
Sent from my iPhone using Tapatalk
Quote from: StealBlueSHO on June 09, 2019, 12:39:28 PM
Yea, if I sell the SHO it would have to be private party... most likely to someone in the community. No dealer is gonna want to take a trade on something that has been modified to the extent of mine. Not matter how good it runs/looks.
Sent from my iPhone using Tapatalk
Why are you considering selling it now? You just did a lot to it.
Quote from: 802SHO on June 09, 2019, 01:00:48 PM
Quote from: StealBlueSHO on June 09, 2019, 12:39:28 PM
Yea, if I sell the SHO it would have to be private party... most likely to someone in the community. No dealer is gonna want to take a trade on something that has been modified to the extent of mine. Not matter how good it runs/looks.
Sent from my iPhone using Tapatalk
Why are you considering selling it now? You just did a lot to it.
Change things up a bit... I usually offload cars right after I get done doing everything I wanted to do with them... Dunno why.. always have..
Quote from: StealBlueSHO on June 09, 2019, 01:07:43 PM
Quote from: 802SHO on June 09, 2019, 01:00:48 PM
Quote from: StealBlueSHO on June 09, 2019, 12:39:28 PM
Yea, if I sell the SHO it would have to be private party... most likely to someone in the community. No dealer is gonna want to take a trade on something that has been modified to the extent of mine. Not matter how good it runs/looks.
Sent from my iPhone using Tapatalk
Why are you considering selling it now? You just did a lot to it.
Change things up a bit... I usually offload cars right after I get done doing everything I wanted to do with them... Dunno why.. always have..
So you like a project. Project complete you start getting bored?
Quote from: 802SHO on June 09, 2019, 01:12:10 PM
Quote from: StealBlueSHO on June 09, 2019, 01:07:43 PM
Quote from: 802SHO on June 09, 2019, 01:00:48 PM
Quote from: StealBlueSHO on June 09, 2019, 12:39:28 PM
Yea, if I sell the SHO it would have to be private party... most likely to someone in the community. No dealer is gonna want to take a trade on something that has been modified to the extent of mine. Not matter how good it runs/looks.
Sent from my iPhone using Tapatalk
Why are you considering selling it now? You just did a lot to it.
Change things up a bit... I usually offload cars right after I get done doing everything I wanted to do with them... Dunno why.. always have..
So you like a project. Project complete you start getting bored?
Yea, that pretty much nails it....
Couple a couple things left on the SHO... get the tuning ironed out, and the low pressure fuel pump addressed(pump has been developed, waiting on Matt to finalize it)... once that's done, the car is pretty much good to go.. The AOL tune puts down 450awhp on 93 pump gas... the E30 with the upgraded low pump will be 500awhp...
Upgraded trans/PTU/RDU/motor would cost more money than the car is worth lol... so project would be done more or less....
I go back and forth on offloading the SHO every couple months lol.
Sent from my iPhone using Tapatalk
Its almost like a "Get out while you can" type deal. If you keep it you know you'll keep going. But still even if you end up putting more money into the car than what some KBB says it's worth....overall it might be the same price as a corvette....although be able to beat a Corvette....can beat a Corvette now...you know what I mean though. It's still a great piece for anyone's treasure chest if you keep it.
Quote from: shoNoff on June 09, 2019, 09:40:53 AM
Quote from: bamsho on June 09, 2019, 08:09:08 AM
Yeah Rich Yaklin did a test years back. He did Mdesign, stock, Airaid. They were all in within less than a tenth. With old IC, car never ran a 12.3 time in June. It was always in October.
God this make my decision between i/c and hpfp even harder. I can't do both this year it's one or the other.
Pump. You can do more with it than an IC.
I am fast approaching the 70K marker on the SHO and was thinking to change the Accessory Drive and Alternator A/C Belts for a peace of mind! There are 2 Belts IIRC! I will try to tackle these belts by next week! Z
CONTINENTAL 4060450 https://www.rockauto.com/en/moreinfo.php?pk=1334343&cc=1503823&jsn=457 (https://www.rockauto.com/en/moreinfo.php?pk=1334343&cc=1503823&jsn=457)
CONTITECH 6K1145 https://www.rockauto.com/en/moreinfo.php?pk=5405331&cc=1503823&jsn=452 (https://www.rockauto.com/en/moreinfo.php?pk=5405331&cc=1503823&jsn=452)
(https://i.imgur.com/S1khFkJh.jpg)
(https://i.imgur.com/8oqvUXVh.jpg)
There should be only one, the serpentine coz no power steering pump. The poly v is the better choice of the two listed in your post, premium grade if you will.
"Don't you wish you were the person your dog thinks you are"
That is all......
Tried ordering a pair of front fender liners, rear driverside lateral arm and new oil dipstick from Tasca yesterday. Total was about $150. Then shipping was $250? Huh? Yeah probably not. Called them and boy their hold music is by far the worst I think I've ever heard..........Ive heard it before but I really wanted to order this stuff....so left a call back number twice...no call...waited on hold twice upwards of 5 min...that music had me ready to stab someone.
I'm going to try to place a new order...see if they still want to charge me 250 for shipping.....so stupid!
Rockauto to the rescue. Got everything except the lateral arm. The inner fender liners are cheaper and oil dipstick with rockauto so I also ordered some sp542 plugs. Then ordered the lateral arm only from Tasca which was $12 shipping.
Bulk shipping is expensive from the dealership. But different dealerships vary greatly in fees. Check out autonation of white bear lake and lakeland ford.
Try getting a driveshaft lol.
People are hoarding SP542s like doomsday preppers.
Yes and possibly to find they are still around "after" their thought to be extinction...
Great New Video by (FTM) on Ford 6F50/55 Trans Fluid exchange procedure. Z :)
7/16-11MM PLUG
https://www.youtube.com/embed/9xrP6N6hVIc
With Brad's permission I made this to make my Sync wallpaper. Can someone with fantastic computer skills clean this logo up with better lines and resolution?
Quote from: 802SHO on June 23, 2019, 06:20:17 PM
With Brad's permission I made this to make my Sync wallpaper. Can someone with fantastic computer skills clean this logo up with better lines and resolution?
Bit clearer! Z. :)
(https://i.imgur.com/Wkdxl9hh.jpg)
Quote from: ZSHO on June 23, 2019, 07:21:43 PM
Quote from: 802SHO on June 23, 2019, 06:20:17 PM
With Brad's permission I made this to make my Sync wallpaper. Can someone with fantastic computer skills clean this logo up with better lines and resolution?
Bit clearer! Z
(https://i.imgur.com/Wkdxl9hh.jpg)
You're the man!
I think you can look at all the sign lines on here and youtube, would have told you who is the tune MAN!
Ok this is it. Alternate version. Simple. I think overall clarity is better.
I like it.
JUN 24, 2019 | FORD PERFORMANCE STAFF
MEDIA GIVE THEIR FIRST IMPRESSIONS OF THE 2020 FORD EXPLORER ST
DEARBORN - Media got their first look at the new 2020 Ford Explorer ST! Check some of our favorite reviews from across the internet:
The 2020 Ford Explorer ST is All About the Horsepower (Automobile)
The 400-HP Ford Explorer ST is the Sportiest Explorer Yet (Motortrend) . Z
https://performance.ford.com/enthusiasts/media-room/2019/06/2020-ford-explorer-st.html?cks=432128850&emailid=FP_FASTNEWS
I'm glad they stole the 3.0 from the Lincolns .. but ... I do wish it was dual injected like the gen2 3.5 to fight the carbon buildup
I'm hoping to finally have some time to install these! Been Too darn busy as of late!
It might also make for a nice memorabilia! Z :D
(https://i.imgur.com/7PAuwWmh.jpg)
Quote from: ZSHO on July 01, 2019, 06:21:14 PM
I'm hoping to finally have some time to install these! Been Too darn busy as of late!
It might also make for a nice memorabilia! Z :D
(https://i.imgur.com/7PAuwWmh.jpg)
YES DO IT! LOL.
Quote from: SM105K on July 02, 2019, 09:53:27 AM
Quote from: ZSHO on July 01, 2019, 06:21:14 PM
I'm hoping to finally have some time to install these! Been Too darn busy as of late!
It might also make for a nice memorabilia! Z :D
(https://i.imgur.com/7PAuwWmh.jpg)
YES DO IT! LOL.
You didn't do that yet? Jeez what else you got laying around that isn't installed yet? Long list probably ...
Quote from: 802SHO on July 02, 2019, 10:26:29 AM
Quote from: SM105K on July 02, 2019, 09:53:27 AM
Quote from: ZSHO on July 01, 2019, 06:21:14 PM
I'm hoping to finally have some time to install these! Been Too darn busy as of late!
It might also make for a nice memorabilia! Z :D
(https://i.imgur.com/7PAuwWmh.jpg)
YES DO IT! LOL.
You didn't do that yet? Jeez what else you got laying around that isn't installed yet? Long list probably ...
might think about new 1st spot O2's while your in there...
Quote from: 76fomoco on July 02, 2019, 10:32:25 AM
Quote from: 802SHO on July 02, 2019, 10:26:29 AM
Quote from: SM105K on July 02, 2019, 09:53:27 AM
Quote from: ZSHO on July 01, 2019, 06:21:14 PM
I'm hoping to finally have some time to install these! Been Too darn busy as of late!
It might also make for a nice memorabilia! Z :D
(https://i.imgur.com/7PAuwWmh.jpg)
YES DO IT! LOL.
You didn't do that yet? Jeez what else you got laying around that isn't installed yet? Long list probably ...
might think about new 1st spot O2's while your in there...
The GH-IC and A/C Condensor consumed much of my resources as the DP were had long before the IC! I will be adding New gaskets-Studs-bolts and new 02 sensors to the DP install!
BTW the MODS never end! Lol. Z
Yep the MODS never end, and the SHO must go on.
as one of my buds said "you just can't step away from the parts counter can you?"
:toilet_claw:
Quote from: 76fomoco on July 02, 2019, 10:32:25 AM
Quote from: 802SHO on July 02, 2019, 10:26:29 AM
Quote from: SM105K on July 02, 2019, 09:53:27 AM
Quote from: ZSHO on July 01, 2019, 06:21:14 PM
I'm hoping to finally have some time to install these! Been Too darn busy as of late!
It might also make for a nice memorabilia! Z :D
(https://i.imgur.com/7PAuwWmh.jpg)
YES DO IT! LOL.
You didn't do that yet? Jeez what else you got laying around that isn't installed yet? Long list probably ...
might think about new 1st spot O2's while your in there...
True indeed! I ordered a set of the Motorcraft DY-1184 Front primary wide-band 02 sensors which are a bit longer than the OEM DY-1185 and one Down-steam Front and one Down stream 02 sensor! New DP comes new accessories.
Here are some PICS for comparison. Z
(https://i.imgur.com/bAj4iRmh.jpg)
(https://i.imgur.com/oJwSdneh.jpg?1)
Z why are you changing the pipes?
Quote from: shoNoff on July 02, 2019, 05:04:38 PM
Z why are you changing the pipes?
They lost bit of their luster over the years here in N.Y. Z
Guess who was secretly visiting me today and did not even tell me :P :P :P
(https://www.ecoboostperformanceforum.com/index.php?action=dlattach;topic=463.0;attach=20905;image)
Quote from: SHOdded on July 02, 2019, 06:32:02 PM
Guess who was secretly visiting me today and did not even tell me :P :P :P
(https://www.ecoboostperformanceforum.com/index.php?action=dlattach;topic=463.0;attach=20905;image)
Ha Ha Nice find! It looks like a Non-PP! Z
(https://i.imgur.com/BNKI1xqh.jpg)
:o :/ :(
Yours is SOOOO much better looking! Still, brought up good memories :D
Quote from: SHOdded on July 02, 2019, 07:42:39 PM
:o :/ :(
Yours is SOOOO much better looking! Still, brought up good memories :D
Definitely gotta meetup once again! Z :)
I left the SHO parked @ the local Walmart to find a sizable ding on the Driver's side door! >:(
Its unfortunately at a bad spot right under the door handle which unfortunately cannot be pulled out! Darn scoundrels! Z
(http://i63.tinypic.com/2cni9hg.jpg)
Sorry to hear that Z. I just sent the below pic to a paintless dent repairman so I feel your pain. I now park the furthest away from everyone possible.
Quote from: SM105K on July 12, 2019, 08:53:49 PM
Sorry to hear that Z. I just sent the below pic to a paintless dent repairman so I feel your pain. I now park the furthest away from everyone possible.
True indeed! I was just briefly picking up some Med's for Mom! Thanks. Z
Quote from: ZSHO on July 12, 2019, 08:45:13 PM
I left the SHO parked @ the local Walmart to find a sizable ding on the Driver's side door! >:(
Its unfortunately at a bad spot right under the door handle which unfortunately cannot be pulled out! Darn scoundrels! Z
(http://i63.tinypic.com/2cni9hg.jpg)
That sucks sorry to see that. I had one in a similar spot taken care of by paintless removal guy. He did a decent job. Not perfect but looks much better.
FawwwQK
i never park in the food stamp section.
No good deed goes unpunished :( I am still sure a pro can take care of it tho, no?
Quote from: SHOdded on July 13, 2019, 12:03:30 AM
No good deed goes unpunished :( I am still sure a pro can take care of it tho, no?
True indeed kind sir! :) Don't trust Body shops or mother-in-laws! Lol. :D
Sometimes things happen for a reason and that mark could represent a sign of good luck! Z
Yes indeedy
https://www.youtube.com/watch?v=FV0g5AL0u-I (https://www.youtube.com/watch?v=FV0g5AL0u-I)
this was a lot of fun! had an 85 GT TT car for a bit. Glad the 80's are gone.
Quote from: 76fomoco on July 16, 2019, 04:58:56 PM
https://www.youtube.com/watch?v=FV0g5AL0u-I (https://www.youtube.com/watch?v=FV0g5AL0u-I)
this was a lot of fun! had an 85 GT TT car for a bit. Glad the 80's are gone.
I would kill for a Turbo GTA......or GN, or Typhoon, or Cyclone....
I was pleasantly surprised today with the temps hovering in the mid 90's with the real feel of 108 F and A/C on Max the Redhead pulled like a Freight train @ warp speed and most likely due to the updated Gearhead IC and in conjunction with the DPM! Z
(https://i.imgur.com/ZUGcosC.gif)
Down pipes give you a bit more good exhaust sound?
love how mine is with the sock dp back.
Definitely sounds better with zero drone and the spooling of the Turbos can be heard together with the Tial BOV! Dual intake with recirc ports for BOV is @ the powder coater which should be here next week. Z
Big moves :)
The PPE Catted DP weigh roughly 26 Ib IIRC! Z
Quote from: ZSHO on July 23, 2019, 06:49:48 AM
The PPE Catted DP weigh roughly 26 Ib IIRC! Z
26.04 lbs to be exact.
Quote from: ZSHO on July 01, 2019, 06:21:14 PM
I'm hoping to finally have some time to install these! Been Too darn busy as of late!
It might also make for a nice memorabilia! Z :D
(https://i.imgur.com/7PAuwWmh.jpg)
It's alright. Mine have been sitting around for over a year now
I've been running the stock tune and 87 octane for a few months now and I've gotten used to the slow turdiness of it. I decided to drive my mustang into work since it's such a beautiful fall like day today. The mustang sure feels peppy compared to the SHO now when it has been the other way around when running the 91 tune. sigh... running 87 does save me about $10 a week in gas and keeps the wife from bickering about the gas bill
Well a good friend of mine Zach Wright and his car the Blue Turd( highly modified Gen2), he has worked super hard and some very long nights. He put the car finally into the 9s. Big Congratulations to him.
Good God Speed! :thumb:
fun watching his 1320 video!
A buddy of mine is out there watching at street car takeover. He text me a little while ago and said. "I just saw an old blue sho run a 9. Firggin sick." I didn't know it was his first 9 congrats to him that's awesome! Pretty sure he said he has video of it too. Sent me a pic also.
Wow 9 second quarter mile? Damn
Yeah, his best of the day was a 9.6!
It amazes me what can be accomplished when you don't listen to the naysayers and you don't give up on your goals, no matter how far fetched they may seem. Perseverance pays off. Congrats to Zach Wright!
That is Insane! I dont necessarily follow other boards,especially FB!
Thanks to Brian (Bamsho) for sharing. Z :)
A good friend of mine was there and put together a little video of his runs. Man he's got that thing moving. I love watching the 4 door hang with the honda's. Nice work Zach
https://m.youtube.com/watch?feature=youtu.be&v=c-glyRZCe3k (https://m.youtube.com/watch?feature=youtu.be&v=c-glyRZCe3k)
Quote from: bamsho on July 28, 2019, 03:50:18 PM
Well a good friend of mine Zach Wright and his car the Blue Turd( highly modified Gen2), he has worked super hard and some very long nights. He put the car finally into the 9s. Big Congratulations to him.
Wow that is a huge accomplishment! I thought someone mentioned a 9 second pass on facebook over the weekend as well but didn't know it was the Blue Turd. Congratulations Zach and all involved, that is excellent!
Why does one choose to get sick in the middle of summer!! Z :doctor:
It is not summer. It is monsoon season! Feel better soon, Z!
Quote from: ZSHO on August 07, 2019, 04:09:50 PM
Why does one choose to get sick in the middle of summer!! Z :doctor:
sounds like a bad choice!
as I sit here with my shoulder and bicep in a sling and of no use for me for the next 12 weeks. Good news is I now can wipe my azz with my left hand (right handed) without it looking like a 5th grade art painting.
This is now a few bad choices! As I could have done it last summer :hmmm:
That sucks! Hoping for a speedy/full recovery!
Quote from: 76fomoco on August 07, 2019, 04:20:04 PM
Quote from: ZSHO on August 07, 2019, 04:09:50 PM
Why does one choose to get sick in the middle of summer!! Z :doctor:
sounds like a bad choice!
as I sit here with my shoulder and bicep in a sling and of no use for me for the next 12 weeks. Good news is I now can wipe my azz with my left hand (right handed) without it looking like a 5th grade art painting.
This is now a few bad choices! As I could have done it last summer :hmmm:
Brother the struggle is real. I had my right arm basically rebuilt from the shoulder down in feb. I had to use my left for roughly 8 weeks. The first 2 weeks were so bad, I basically gave up and just went in the shower afterwards.
:o hopefully you were able to squat! yeah, the docs paint a relatively rosy scenario compared to what you actually have to do to make it through.
Quote from: SHOdded on August 07, 2019, 04:12:52 PM
It is not summer. It is monsoon season! Feel better soon, Z!
True indeed! Thannks. Z
Quote from: SHOdded on August 07, 2019, 05:54:26 PM
:o hopefully you were able to squat! yeah, the docs paint a relatively rosy scenario compared to what you actually have to do to make it through.
Oh yea the dr told me he was performing surgery again 3 days after what I had done. I find it hard to believe it took me 6 weeks before I could even hold a pen. And that was with PT. Monsoon season for real. We are getting hammered in NH today with thunderstorms.
Been brutal here too with rain yesterday and today. Yesterday, we had lightning and thunder, thought for sure the MOAB had exploded right above our heads, LOL.
Lmao! We got that today. It was shaking the windows at the shop. I've never felt that's right I said felt thunder like that in my life. Great so that means more rain tomorrow yippee lol.
Better have the ark ready :P
I have been on the fence in regards to this Modern Billet Chrome Underhood Dress-up Kit and purely for Aesthetics!
The only issue is it does require a bit of modification AFAIK!
I think Ford Racing also makes a similar alternative and might take that route since Underhood products are very limited on this platform! Dunno. Z
https://www.americanmuscle.com/chrome-underhood-kit-2011v6.html (https://www.americanmuscle.com/chrome-underhood-kit-2011v6.html)
(http://i67.tinypic.com/yovhv.jpg)
(http://i68.tinypic.com/x5updv.jpg)
Dealer called and said my Explorer is done. A leaky PTU was one of 4 concerns I brought it in for. They said the leaking PTU was re-sealed and didn't need replacement. Anybody know what determines reseal vs replace? I had always seen that the dealer tends to replace at any sign of leakage, and rarely heard of them re-sealing.
Since it's a warranty claim, is the MoCo trying to get me past the warranty period with a lower repair bill?
Sent from my iPhone using Tapatalk
The ptu has 3 seals + the vent. 3 of them can leak ptu fluid. 1 can leak trans fluid. So it depends which seal was leaking. Internally, if an idler bearing assembly is determined to be at fault, they have a kit to replace it without replacing the ptu.
Quote from: SHOdded on August 15, 2019, 02:57:17 PM
The ptu has 3 seals + the vent. 3 of them can leak ptu fluid. 1 can leak trans fluid. So it depends which seal was leaking. Internally, if an idler bearing assembly is determined to be at fault, they have a kit to replace it without replacing the ptu.
Cool, thanks, Z! From what I could tell it was only the rear seal at the driveshaft that was leaking. From Ford Tech Makuloco's videos it was the least common one, but he did comment that it leaks "often enough." :)
Sent from my iPhone using Tapatalk
Quote from: MiWiAu on August 15, 2019, 01:06:00 PM
Dealer called and said my Explorer is done. A leaky PTU was one of 4 concerns I brought it in for. They said the leaking PTU was re-sealed and didn't need replacement. Anybody know what determines reseal vs replace? I had always seen that the dealer tends to replace at any sign of leakage, and rarely heard of them re-sealing.
Since it's a warranty claim, is the MoCo trying to get me past the warranty period with a lower repair bill?
Sent from my iPhone using Tapatalk
My SHO was leaking transmission fluid on my garage floor after only having 300 miles on it. Took it to the dealer and they replaced the inner PTU seal under warranty and not the whole PTU. I wouldn't be to concerned unless it stated leaking again.
Quote from: MiWiAu on August 15, 2019, 03:26:44 PM
Cool, thanks, Z! From what I could tell it was only the rear seal at the driveshaft that was leaking. From Ford Tech Makuloco's videos it was the least common one, but he did comment that it leaks "often enough." :)
In my "experience"/data gathering, it is usually a leak at the vent, a leak at the PTU-axle seal, a leak at the PTU-transmission seal, or a leak at the PTU-driveshaft seal, in descending order. The PTU-driveshaft seal is WAY down the list of probabilities on our family of AWD systems. More likely that the rear pinion seal at the RDU will leak, or the carrier bearings of the driveshaft will disintegrate :)
Quote from: SHOdded on August 15, 2019, 05:20:53 PM
Quote from: MiWiAu on August 15, 2019, 03:26:44 PM
Cool, thanks, Z! From what I could tell it was only the rear seal at the driveshaft that was leaking. From Ford Tech Makuloco's videos it was the least common one, but he did comment that it leaks "often enough." :)
In my "experience"/data gathering, it is usually a leak at the vent, a leak at the PTU-axle seal, a leak at the PTU-transmission seal, or a leak at the PTU-driveshaft seal, in descending order. The PTU-driveshaft seal is WAY down the list of probabilities on our family of AWD systems. More likely that the rear pinion seal at the RDU will leak, or the carrier bearings of the driveshaft will disintegrate :)
I didn't see anything from the vent. That was my first guess that it puked up top and ran down, but it looked dry on top. I only saw it around the driveshaft/rear seal, and the service rep confirmed that's where they found the leak.
I first changed the PTU fluid at 30k, and every 15k after that, and it still wasn't enough to keep it from leaking. I also wonder if the other dealer somehow damaged the rear PTU seal when they replaced the timing chain. They pulled the whole motor/trans/PTU for that service...
I'll keep playing the game for now, but unfortunately for me, the Exploder will be traded in on a minivan just before the extended warranty runs out.
Sent from my iPhone using Tapatalk
It is possible that the seal was damaged during the timing chain service. Check the invoice to see if the seal is listed on there. That particular seal has to be marked/indexed at the time the driveshaft is removed, and probably was not during this service.
My loving wife had this shirt made for me. I freakin love it.
(https://i.imgur.com/qabRrE0h.jpg)
Why do all my pics go sideways, 🤬🤬🤬🤬
Thanks Z, your the best.
Well wife and I went back to BSD to run the Jensen's race that was postponed due to rain from last Saturday night. First round I got revenge on a Demon, not the one I lost to last year, but I made due. The SHO did her thing as usual, back into the winner's circle, this time I got a nice payday. $$$!!!
The Demon that I wanted to run to get revenge on had Catastrophic rear end failure earlier in the day The rear broke so bad the it spun 180 degrees, with the yoke pointing towards the rear of the car. It pushed up the trunk floor pan, and rear subframe damage. This was a totally stock Demon, guess we will find out how good the FCA warranty in it.
On a side note, this will be my last win under the Livernois banner. I think for my future goals, and current mods, it's time to move on.
Congratulations!!!
Its very unfortunate but need to return the Redhead back to stock Tune in Prep for emissions testing in the next couple of days! So stay tuned!
BTW- To everyone here @ the E.B.P.F and beyond Have a Happy Labor day. Z :usa: :usa: :usa:
Quote from: bamsho on August 25, 2019, 09:57:21 AM
Well wife and I went back to BSD to run the Jensen's race that was postponed due to rain from last Saturday night. First round I got revenge on a Demon, not the one I lost to last year, but I made due. The SHO did her thing as usual, back into the winner's circle, this time I got a nice payday. $$$!!!
The Demon that I wanted to run to get revenge on had Catastrophic rear end failure earlier in the day The rear broke so bad the it spun 180 degrees, with the yoke pointing towards the rear of the car. It pushed up the trunk floor pan, and rear subframe damage. This was a totally stock Demon, guess we will find out how good the FCA warranty in it.
On a side note, this will be my last win under the Livernois banner. I think for my future goals, and current mods, it's time to move on.
Congrats Brian and Chris on a well deserved achievement! Awesome to say the least. Z :thumb: :thumb:
VP RACING FUELS OPENS FIRST-EVER VP FASTLUBEâ„¢ OIL CHANGE CENTER! Z :)
https://vpracingfuels.com/vp-racing-fuels-opens-first-ever-vp-fastlube-oil-change-center/
I spent way too much time making this video of my trip to NED 8/30/19 of my new personal best. Hope you guys get a kick out of it. https://youtu.be/B85FFJku83s
Quote from: 802SHO on September 03, 2019, 08:09:01 AM
I spent way too much time making this video of my trip to NED 8/30/19 of my new personal best. Hope you guys get a kick out of it. https://youtu.be/B85FFJku83s
Congrats on your new PB! Awesome indeed. Z :thumb:
Quote from: ZSHO on September 03, 2019, 08:37:40 AM
Quote from: 802SHO on September 03, 2019, 08:09:01 AM
I spent way too much time making this video of my trip to NED 8/30/19 of my new personal best. Hope you guys get a kick out of it. https://youtu.be/B85FFJku83s
Congrats on your new PB! Awesome indeed. Z :thumb:
Thanks Z!
Great video.
Greg
Quote from: PDSHO on September 04, 2019, 12:17:38 AM
Great video.
Greg
Thanks Greg! Its more like a mini movie than a video which is what I was aiming for. Glad you enjoyed it!
Next video needs to have "Nice Shot" by Filter as background music.
Good to see ole girl getting after it.
Quote from: SM105K on September 04, 2019, 10:13:26 AM
Next video needs to have "Nice Shot" by Filter as background music.
Good to see ole girl getting after it.
Lol I can probably do that. Nice song btw
I was looking to trade in my 2018 Jeep for a 2019 X-SPORT with very limited to practically no availability in the N.J region!! :o Not interested on the 2020 model as its lost its luster in front Fascia IMO. Z
Jeep no good?
Quote from: SHOdded on September 06, 2019, 07:57:57 PM
Jeep no good?
Its a great Suv but lacking a few features such as blind spot mirrors and cooling seats etc.
Maybe it's not meant to be! Z :-\
I returned to stock Tune a few days ago in Prep for todays emmissions testing and had the I/M in readiness state in roughly 30 miles of the Driving cycle with the exception of the Evap System which takes a it longer to complete and was quite the happy camper!
I guess it pays to stay on TOP of your vehicles maintenance aspect in Ocd form. Lol. :)
(https://i.imgur.com/C1AuUXAh.jpg)
I had my E30 tune on when I passed my Pa inspection. Didnt even think about it. After I got the stickers. I was like. Oh yeah. LOL.
This past labor day I traded in my 2011 SHO in for a 2015 SHO and will be starting the modding process in a few months when I will have a bit saved for the costs. Was thinking when it comes to tuning devices, I am definitely liking the SCT Livewire because of the small screen and the interface of it, however with that said I was wondering if anyone on here has figured out a way to integrate into the existing touch screen display that comes in our SHOs from the factory?
Good luck with the new ride!
Found this while I was surfing the autotrader site last night. Keep in mind that is Canadian dollars.
https://www.autotrader.ca/ico/ford/taurus/port%20coquitlam/british%20columbia/5_44995836_20150616123911749/?showcpo=ShowCpo&ncse=no&orup=9_14_14&pc=N3R%201E1&sprx=-1 (https://www.autotrader.ca/ico/ford/taurus/port%20coquitlam/british%20columbia/5_44995836_20150616123911749/?showcpo=ShowCpo&ncse=no&orup=9_14_14&pc=N3R%201E1&sprx=-1)
Quote from: tarmstrong on September 09, 2019, 08:52:54 AM
Found this while I was surfing the autotrader site last night. Keep in mind that is Canadian dollars.
https://www.autotrader.ca/ico/ford/taurus/port%20coquitlam/british%20columbia/5_44995836_20150616123911749/?showcpo=ShowCpo&ncse=no&orup=9_14_14&pc=N3R%201E1&sprx=-1 (https://www.autotrader.ca/ico/ford/taurus/port%20coquitlam/british%20columbia/5_44995836_20150616123911749/?showcpo=ShowCpo&ncse=no&orup=9_14_14&pc=N3R%201E1&sprx=-1)
600 at the crank is probable with the upgraded turbos and meth. 600 to the tire is a stretch.
What surprised me was it was a 2019 with 1,200 miles. That is about as low a price as you can find for a brand new vehicle, without all the upgrades.
If any of you have Netflix, this show is on Friday the 20th. It will have the famous Blue Turd in it. Zach has put alot of money, long hours into the Blue Turd. Glad he is getting some well deserved recognition.
Quote from: bamsho on September 10, 2019, 07:24:43 PM
If any of you have Netflix, this show is on Friday the 20th. It will have the famous Blue Turd in it. Zach has put alot of money, long hours into the Blue Turd. Glad he is getting some well deserved recognition.
This is going to be cool to watch
I have a 2015 SHO and today while sitting in traffic I noticed that on my steering wheel next to the cruise control buttons, that there is a button that says "GAP" haha. I like to think that we all could have a "Gaptizing" button on our steering wheels just hiding in plain sight and not even know it haha! Maybe there is a sequence we have to press it in order to initiate launch mode!
so i switched from my stock tune to the E30 tune a little while ago. I've filled up for gas 4 times now and my MPG's for each fill up were 21, 21.4, 22, and 21.6. I commute 55 miles a day for work and with the stock tune on 87 I was only able to get over 23 MPG once but was typically in the 22.x range. So really only 1 MPG less running E30 (mixing with E10 87) and slightly less cost at the pump. I think that is pretty good and the car is much more enjoyable to drive with that extra power available.
Just looked into shipping one splitter. Quoted from $190 to $300 to ship essentially an empty box as it doesn't weigh much. Getting raped on the dimensions. I learned a private company with a FedEx account can get discounts as much as 85% off....probably why you can find the chin spoiler to include free shipping. Yet for someone like me I am being asked to pay as much as $300? FedEx gave me a local private company that has an account with them to try and get a cheaper rate...even though it goes through the same shipping company FedEx.......am I crazy or is this stupid? Eye opener crap welcome to the shipping industry....
Quote from: 802SHO on September 14, 2019, 12:28:52 PM
Just looked into shipping one splitter. Quoted from $190 to $300 to ship essentially an empty box as it doesn't weigh much. Getting raped on the dimensions. I learned a private company with a FedEx account can get discounts as much as 85% off....probably why you can find the chin spoiler to include free shipping. Yet for someone like me I am being asked to pay as much as $300? FedEx gave me a local private company that has an account with them to try and get a cheaper rate...even though it goes through the same shipping company FedEx.......am I crazy or is this stupid? Eye opener crap welcome to the shipping industry....
I would post this under your original thread (Splitter) in order for everyone to be updated! I appreciate you keeping the ecoboost community up to speed. Thanks. Z :)
https://www.ecoboostperformanceforum.com/index.php/topic,10089.msg153746/topicseen.html#new (https://www.ecoboostperformanceforum.com/index.php/topic,10089.msg153746/topicseen.html#new)
802SHO, that's essential the same deal as the chin spoiler - shipping doubled the price.
Quote from: 6500rpm on September 16, 2019, 06:52:15 AM
802SHO, that's essential the same deal as the chin spoiler - shipping doubled the price.
It's insane. Quite frustrated at the moment
:(
The Transition between Summer-blend to winter-blend gasoline is upon us effective Sept 15 in most states. Z
https://blog-content.gasbuddy.com/uploads/2018/12/2019fueloutlookvUSvF.pdf
Here is a sneak preview of the newest edition to the stable! I will shortly update more info and Pics under the appropriate section under [Your Non-Ecoboost build topics] Thanks and hope everyone is doing well. Z
(https://i.imgur.com/Rrb107Rh.jpg)
not a clue lol
Oh Oh, I think I know what it is. Durango, but question is it an SRT model.
^^^^ Durango SRT?
Quote from: 802SHO on September 20, 2019, 05:05:51 AM
^^^^ Durango SRT?
Dodge emblem on the wheels and that hood I'd say you are 100% correct. Nice truck Z can't wait to see more of it.
I've driven my car about 1100 miles this year. So that's 1100 miles on an oil and filter change, trans drain and fill ans Redline LWSP gear oil in PTU and RDU. Am I crazy for changing it already? Oil ans filter I'll definitely do but should I leave the trans and gear oil? I just drive it so hard so I'd rather just change it ...knowing I did all I could
PTU and RDU are good. I do a 5 in 5 out trans swap everytime I change my oil however.
Quote from: SM105K on September 24, 2019, 10:37:37 AM
PTU and RDU are good. I do a 5 in 5 out trans swap everytime I change my oil however.
I like that plan. I'll do that! I know the mileage is minimum but for peace of mind I'll do the oil and trans fluid. I'm equally hard on the brakes. I'll need to change those next year.
Quote from: 802SHO on September 24, 2019, 11:46:48 AM
Quote from: SM105K on September 24, 2019, 10:37:37 AM
PTU and RDU are good. I do a 5 in 5 out trans swap everytime I change my oil however.
I like that plan. I'll do that! I know the mileage is minimum but for peace of mind I'll do the oil and trans fluid. I'm equally hard on the brakes. I'll need to change those next year.
Honestly I would change the RDU every other year, and PTU yearly.
Quote from: SM105K on September 24, 2019, 12:31:12 PM
Quote from: 802SHO on September 24, 2019, 11:46:48 AM
Quote from: SM105K on September 24, 2019, 10:37:37 AM
PTU and RDU are good. I do a 5 in 5 out trans swap everytime I change my oil however.
I like that plan. I'll do that! I know the mileage is minimum but for peace of mind I'll do the oil and trans fluid. I'm equally hard on the brakes. I'll need to change those next year.
Honestly I would change the RDU every other year, and PTU yearly.
I figured a 1000 mile change was extreme. 🤦
Quote from: 802SHO on September 24, 2019, 03:01:20 PM
Quote from: SM105K on September 24, 2019, 12:31:12 PM
Quote from: 802SHO on September 24, 2019, 11:46:48 AM
Quote from: SM105K on September 24, 2019, 10:37:37 AM
PTU and RDU are good. I do a 5 in 5 out trans swap everytime I change my oil however.
I like that plan. I'll do that! I know the mileage is minimum but for peace of mind I'll do the oil and trans fluid. I'm equally hard on the brakes. I'll need to change those next year.
Honestly I would change the RDU every other year, and PTU yearly.
I figured a 1000 mile change was extreme. 🤦
The RDU is only seeing limited use, however the PTU along with the trans is taking the brunt of the work load. I am changing my RDU bi yearly, and my PTU yearly regardless, unless I see more then 8k miles in a year. That isnt likely. There is extreme maintenance, and then there is just pissing away money.
Anyone see the new GF-6 A and GF-6 B motor oil coming out next year that is supposed to be better for GDI engines? I saw this on Scotty Kilmer's channel on youtube and figured I would share it to see everyone's opinion https://youtu.be/8HmGv1fgvtM (https://youtu.be/8HmGv1fgvtM)
I will be exploring it soon. I think it was due, likely as a transition away from naturally aspirated engines. Wonder tho if additive levels will be increased for 6A vs SN+ ...
https://www.lubrizoladditives360.com/adoption-of-ilsac-gf-6a-gf-6b-and-api-sp-categories/ (https://www.lubrizoladditives360.com/adoption-of-ilsac-gf-6a-gf-6b-and-api-sp-categories/)
https://www.lubrizoladditives360.com/wp-content/uploads/2019/07/API-Adoption-ILSAC-GF-6A-GF-6B-and-API-SP.pdf (https://www.lubrizoladditives360.com/wp-content/uploads/2019/07/API-Adoption-ILSAC-GF-6A-GF-6B-and-API-SP.pdf)
http://ballots.api.org/marketing/ballots/docs/ILSAC-GF-6B-Annex-Q-Table-Q-7-Ballot-Complete.pdf (http://ballots.api.org/marketing/ballots/docs/ILSAC-GF-6B-Annex-Q-Table-Q-7-Ballot-Complete.pdf)
https://www.motor.com/2019/05/get-ready-gf-6-motor-oil/ (https://www.motor.com/2019/05/get-ready-gf-6-motor-oil/)
https://www.enginelabs.com/engine-tech/think-thin-gf-6-is-the-latest-spec-in-the-world-of-engine-oil/ (https://www.enginelabs.com/engine-tech/think-thin-gf-6-is-the-latest-spec-in-the-world-of-engine-oil/)
Was watching youtube and I saw this pretty cool roll racing video of a nice assortment of cars running on an oval track. They ranged in power from 600+ all the way up to 1500hp monsters. Made me think if we only had the transmission and PTU upgrades, maaaayybe we could get in on one of these races sometime!
Also had me thinking what numbers a built 3.5 ecoboost motor could handle if the transmission and PTU would hold up.
Here is the video of the roll race: https://youtu.be/mm7sXsUo2kE (https://youtu.be/mm7sXsUo2kE)
BTW, Turn the speakers or headphones down first because the intro may pop eardrums haha.
Anyone else NEVER heard of this car for sale. https://www.ebay.com/itm/2014-Ford-Taurus-SHO/254372205214 (https://www.ebay.com/itm/2014-Ford-Taurus-SHO/254372205214)
Quote from: 802SHO on September 29, 2019, 07:45:03 AM
Anyone else NEVER heard of this car for sale. https://www.ebay.com/itm/2014-Ford-Taurus-SHO/254372205214 (https://www.ebay.com/itm/2014-Ford-Taurus-SHO/254372205214)
Wow! 625 tq!!??
Sent from my SM-G965U using Tapatalk
Quote from: 802SHO on September 29, 2019, 07:45:03 AM
Anyone else NEVER heard of this car for sale. https://www.ebay.com/itm/2014-Ford-Taurus-SHO/254372205214 (https://www.ebay.com/itm/2014-Ford-Taurus-SHO/254372205214)
Remember we have talked about the unicorn? That is the car. It is local to me and was built by the shop I get all my dyno runs at.
Oh I think you did mention it before. 22k? That's a steal. What does it run or does anyone know?
Dont know. I have never seen it, only heard about it.
Someone needs to snag it
Quote from: 802SHO on September 29, 2019, 08:27:54 PM
Someone needs to snag it
Jordan should snag it.....
After he blows his current one up.
Bwahahahaha
Sent from my SM-N950U using Tapatalk
Quote from: 802SHO on September 29, 2019, 08:27:54 PM
Someone needs to snag it
Nice ride not a terrible deal either. But honestly I'd rather slam my junk in a sliding glass door. Then buy another ford with the sync 2 system. God that thing was terrible in my old Sho.
Luckily, DIY'ing Sync3 upgrades are quite commonplace nowadays. Under $1,000 invested, with some help from Forscan for configuration.
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
Quote from: 802SHO on September 30, 2019, 04:57:31 AM
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
I have Sync 2 and it is querky, not enough to make me want to upgrade to sync 3.
Quote from: 802SHO on September 30, 2019, 04:57:31 AM
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
By far the worst system I have ever seen in a 50k car. Hence the lawsuits.
Quote from: SM105K on September 30, 2019, 07:24:46 AM
Quote from: 802SHO on September 30, 2019, 04:57:31 AM
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
I have Sync 2 and it is querky, not enough to make me want to upgrade to sync 3.
Sync 3 is miles ahead of 2 and I mean miles. It's like they actually tried to give you an infotainment center that works. Pretty amazing for 50/60k cars right. My car fell under the class action suit since it was an early 13. So maybe it was worse I dunno. My dads 2015 mustang seemed to work a little better then mine. But my sister has a 2015 fusion and it's absolute s*** in her car too.
Quote from: bpd1151 on September 29, 2019, 11:07:47 PM
Quote from: 802SHO on September 29, 2019, 08:27:54 PM
Someone needs to snag it
Jordan should snag it.....
After he blows his current one up.
Bwahahahaha
Sent from my SM-N950U using Tapatalk
Lol I don't need that bad juju. Cars still in one piece and honestly isn't ragged edge either! I've seen the car a few times on Facebook. Pretty impressive build. Imo someone else's big build is much more of a liability than a blessing..
Quote from: shoNoff on September 30, 2019, 07:54:45 AM
Quote from: 802SHO on September 30, 2019, 04:57:31 AM
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
By far the worst system I have ever seen in a 50k car. Hence the lawsuits.
Quote from: SM105K on September 30, 2019, 07:24:46 AM
Quote from: 802SHO on September 30, 2019, 04:57:31 AM
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
I have Sync 2 and it is querky, not enough to make me want to upgrade to sync 3.
Sync 3 is miles ahead of 2 and I mean miles. It's like they actually tried to give you an infotainment center that works. Pretty amazing for 50/60k cars right. My car fell under the class action suit since it was an early 13. So maybe it was worse I dunno. My dads 2015 mustang seemed to work a little better then mine. But my sister has a 2015 fusion and it's absolute s*** in her car too.
If it was my daily then I might have issues with it in my SHO. I have Sync 2 in my ST and daily that. No problems. I think the more tech involved these infotainment centers the worse off we are. The upgrade to Sync 3 is $1000. $1000 is $1000 closer to a X35 and almost the stand alone kit in my car. My priorities are different I guess.
Quote from: Jordan on September 30, 2019, 08:02:55 AM
Quote from: bpd1151 on September 29, 2019, 11:07:47 PM
Quote from: 802SHO on September 29, 2019, 08:27:54 PM
Someone needs to snag it
Jordan should snag it.....
After he blows his current one up.
Bwahahahaha
Sent from my SM-N950U using Tapatalk
Lol I don't need that bad juju. Cars still in one piece and honestly isn't ragged edge either! I've seen the car a few times on Facebook. Pretty impressive build. Imo someone else's big build is much more of a liability than a blessing..
Good point
Quote from: SM105K on September 30, 2019, 09:45:41 AM
Quote from: shoNoff on September 30, 2019, 07:54:45 AM
Quote from: 802SHO on September 30, 2019, 04:57:31 AM
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
By far the worst system I have ever seen in a 50k car. Hence the lawsuits.
Quote from: SM105K on September 30, 2019, 07:24:46 AM
Quote from: 802SHO on September 30, 2019, 04:57:31 AM
Lol you keep saying Sync 2 is horrible. I'm still with Sync 1......must be better than 1?
I have Sync 2 and it is querky, not enough to make me want to upgrade to sync 3.
Sync 3 is miles ahead of 2 and I mean miles. It's like they actually tried to give you an infotainment center that works. Pretty amazing for 50/60k cars right. My car fell under the class action suit since it was an early 13. So maybe it was worse I dunno. My dads 2015 mustang seemed to work a little better then mine. But my sister has a 2015 fusion and it's absolute s*** in her car too.
If it was my daily then I might have issues with it in my SHO. I have Sync 2 in my ST and daily that. No problems. I think the more tech involved these infotainment centers the worse off we are. The upgrade to Sync 3 is $1000. $1000 is $1000 closer to a X35 and almost the stand alone kit in my car. My priorities are different I guess.
I looked into it myself on the old sho. I just didnt think the 1k was worth it. I'd rather go fast and turn the radio off lol. The edge is slow so I have time to care about sound systems and navigations haha. Also the edge has CarPlay I think that makes it much better as well. But even the sony system in the edge is miles better then the sho.
2015 SHO and the Sync 2 works fine for me. The two things I do dislike are the touch screen and its lack of touch and the the Nav sucks. I use my phone with Google maps/Waze and dont touch the screen too much so its not a deal breaker.
However the SHO has 2 USB ports that you can insert TWO usb thumb drives. Thats a lot of music and you can switch between them easy. It streams MP3's fine and the CDs sound great. Yeah I still use them.
Quote from: Macgyver on September 30, 2019, 09:34:55 PM
2015 SHO and the Sync 2 works fine for me. The two things I do dislike are the touch screen and its lack of touch and the the Nav sucks. I use my phone with Google maps/Waze and dont touch the screen too much so its not a deal breaker.
However the SHO has 2 USB ports that you can insert TWO usb thumb drives. Thats a lot of music and you can switch between them easy. It streams MP3's fine and the CDs sound great. Yeah I still use them.
I agree with most you said. I have no problem with my sync 2. In comparison to my new C7, the GM system sucks. Although some of it may be my short memory when switching between cars I have to relearn everything every time. I keep over 150 songs on a WIN created playlist on the thumb drives. The GM system can't handle the higher numbers which is annoying.
Has anyone heard of this new product that plugs into the ODB port which enables NAVI on a non-nav vehicle!! Dunno. Z
MYFORD TOUCH GPS NAVIGATION UPGRADE PROGRAMMER F-MFTNAV
https://www.obdgenie.com/products/myford-touch-gps-navigation-upgrade-programmer-f-mftnav (https://www.obdgenie.com/products/myford-touch-gps-navigation-upgrade-programmer-f-mftnav)
Quote from: ZSHO on October 07, 2019, 09:01:10 PM
Has anyone heard of this new product that plugs into the ODB port which enables NAVI on a non-nav vehicle!! Dunno. Z
MYFORD TOUCH GPS NAVIGATION UPGRADE PROGRAMMER F-MFTNAV
https://www.obdgenie.com/products/myford-touch-gps-navigation-upgrade-programmer-f-mftnav (https://www.obdgenie.com/products/myford-touch-gps-navigation-upgrade-programmer-f-mftnav)
Looks like for $500 it'll do what my phone does for free. Granted my phone only has a 6" screen, not 8", but I'm OK with that.
Sent from my LM-G710 using Tapatalk
I just used Forscan and unlocked my Navi. I had get a SD card, but it was worth my time and money.
Quote from: SM105K on October 08, 2019, 09:27:26 AM
I just used Forscan and unlocked my Navi. I had get a SD card, but it was worth my time and money.
on the sho?
Quote from: SM105K on October 08, 2019, 09:27:26 AM
I just used Forscan and unlocked my Navi. I had get a SD card, but it was worth my time and money.
Probably on your ST! Navi cannot be enabled through Forscan on a SHO! Z
Yes on my SHO. It didn't come factory with the Navi unlocked. My ST did.
I used this exact video to unlock the Navigation in the my SHO. It was one of the first Forscan mods I did to the SHO.
https://youtu.be/KXZgSOOu87I
I can post my window sticker that says it doesn't have navigation, and I can post a picture of my functional navigation (that I hacked using the video and Forscan) with today's time and date if you would like.
I spoke about it here back in February.
https://shoforum.com/index.php?threads/navigation-on-13pp.138867/#post-1504679
Quote from: SM105K on October 08, 2019, 03:06:08 PM
Yes on my SHO. It didn't come factory with the Navi unlocked. My ST did.
I used this exact video to unlock the Navigation in the my SHO. It was one of the first Forscan mods I did to the SHO.
https://youtu.be/KXZgSOOu87I
I can post my window sticker that says it doesn't have navigation, and I can post a picture of my functional navigation (that I hacked using the video and Forscan) with today's time and date if you would like.
I spoke about it here back in February.
https://shoforum.com/index.php?threads/navigation-on-13pp.138867/#post-1504679
Hmm interesting! Whats your Build date! What version Sync. I needed to get an AB File and have the APIM reprogrammed in order to work! BTW avoid messing with the Sync system it will wipe the NAVI! Z
Quote from: ZSHO on October 08, 2019, 04:06:19 PM
Quote from: SM105K on October 08, 2019, 03:06:08 PM
Yes on my SHO. It didn't come factory with the Navi unlocked. My ST did.
I used this exact video to unlock the Navigation in the my SHO. It was one of the first Forscan mods I did to the SHO.
https://youtu.be/KXZgSOOu87I
I can post my window sticker that says it doesn't have navigation, and I can post a picture of my functional navigation (that I hacked using the video and Forscan) with today's time and date if you would like.
I spoke about it here back in February.
https://shoforum.com/index.php?threads/navigation-on-13pp.138867/#post-1504679
Hmm intresting! Whats your Build date! Thanks. Z
I will take a picture of it tonight. In the video people are commenting across platforms that it worked for them. ST, Taurusa, F150, ect.
Here is the info for my car. If you look at the window sticker you will see it does not have navigation.
Next is the my build of 2/12.
Last picture is my Navi active which I activated with Forscan.
Quote from: SM105K on October 08, 2019, 03:06:08 PM
Yes on my SHO. It didn't come factory with the Navi unlocked. My ST did.
I used this exact video to unlock the Navigation in the my SHO. It was one of the first Forscan mods I did to the SHO.
https://youtu.be/KXZgSOOu87I
I can post my window sticker that says it doesn't have navigation, and I can post a picture of my functional navigation (that I hacked using the video and Forscan) with today's time and date if you would like.
I spoke about it here back in February.
https://shoforum.com/index.php?threads/navigation-on-13pp.138867/#post-1504679
That's interesting Easton. Thanks for the info.
Quote from: shoNoff on October 09, 2019, 11:07:29 AM
Quote from: SM105K on October 08, 2019, 03:06:08 PM
Yes on my SHO. It didn't come factory with the Navi unlocked. My ST did.
I used this exact video to unlock the Navigation in the my SHO. It was one of the first Forscan mods I did to the SHO.
https://youtu.be/KXZgSOOu87I
I can post my window sticker that says it doesn't have navigation, and I can post a picture of my functional navigation (that I hacked using the video and Forscan) with today's time and date if you would like.
I spoke about it here back in February.
https://shoforum.com/index.php?threads/navigation-on-13pp.138867/#post-1504679
That's interesting Easton. Thanks for the info.
No worries. I just hope it enlightens other people that want to unlock it as well.
Thanks for the update Easton! Mine has a Build date of 11/12 which still has me a bit curious! Great alternative indeed and better than having to remove the APIM from the Dash.
Here are a couple of PICS of nine. Z
(https://i.imgur.com/K6YO2HOh.jpg)
(https://i.imgur.com/dUjaLMhh.jpg)
No problem Z! I thought it was common knowledge that you could crack the Navi if you had the SD card and Forscan if you have the Sync2/MyTouch system. I literally just followed the prompts from that guy in the video I posted above. I am pretty sure if your car has the ability to show the location from the "Where's my location button" you can enable the Navi.
Actually thinking back....when I got my free Subscription to XM it didn't have the travel link. The option was grayed out. Then when I unlocked the Navi it the travel link worked. Then when I renewed, XM ran the vin and said I couldn't possibly have the travel link. I told them sign me up for it anyways (I actually use it) and resent the signal and waited on the phone and sure enough it worked. I bet when they ran the Vin and it said it didn't have NAV. Makes sense now.
Quote from: SM105K on October 09, 2019, 05:29:16 PM
No problem Z! I thought it was common knowledge that you could crack the Navi if you had the SD card and Forscan if you have the Sync2/MyTouch system. I literally just followed the prompts from that guy in the video I posted above. I am pretty sure if your car has the ability to show the location from the "Where's my location button" you can enable the Navi.
Actually thinking back....when I got my free Subscription to XM it didn't have the travel link. The option was grayed out. Then when I unlocked the Navi it the travel link worked. Then when I renewed, XM ran the vin and said I couldn't possibly have the travel link. I told them sign me up for it anyways (I actually use it) and resent the signal and waited on the phone and sure enough it worked. I bet when they ran the Vin and it said it didn't have NAV. Makes sense now.
I did not mind removing the APIM since installing the Lockpick! How about the R-hand cluster ? Z
(https://i.imgur.com/bDixAcbh.jpg)
I do not have the r-hand cluster. I thought about it, but didn't take anymore steps toward it.
Well it appears that my wife will be taking over the edge sooner then we thought. With the baby she really wants an suv. So I'll very soon be in the market for another vehicle. I've been kicking around an explorer sport. But the new explorer st drivetrain is so badass. Or do I just offer SBS some cash for his sho? Lol. My wife may divorce me if I come home with another sho. Hell at least they are big enough to live in. I'm just excitedly rambling sorry guys.
Get the SHO, get the SHO, get the SHO........... as you said it's big enough to be a practical family car, can haul a lot of stuff and definitely haul butt. JMHO but it's a logical one.
Sent from my LM-G710 using Tapatalk
Agreed w/ BD.
DO IT!
Sent from my SM-N950U using Tapatalk
We will see. I will start the hunt once I can get some sleep. For those of you that care. My wife gave birth to our first child 9/27. A beautiful baby boy. I haven't been this exhausted, tired, proud, excited in my life. I'm going to take my time and find exactly what I want. The sho is near the top of my list for sure. I'm also going to look into an s4. I've always wanted one and never pulled the trigger. Like I said the explorer sport intrigues me as well. The Explorer st might be a bit more then I want to spend right now.
Congratulations, could not ask for a better gift :D You will put to use superpowers that you never knew you had!
Quote from: shoNoff on October 16, 2019, 08:39:27 PM My wife gave birth to our first child 9/27. A beautiful baby boy. I haven't been this exhausted, tired, proud, excited in my life.
Congrats!
How incredibly cool. Time will go by so, so incredibly fast. Treasure each and every moment. Good, or bad. The latter coming in their teens.
Wife and I recently became empty nesters and I still often wonder where the time went.
Enjoy and revel in the life you created.
Sent from my SM-N950U using Tapatalk
SBS sho is on my radar too but a bit far for me. and the edge for the wife and the new to you sho is the answer. can haul kids in each...
So.....I thought I had sprayed a 75 shot with the .38 NOS jet I found in a local parts store. The outside diameter of the jet was ever so slightly smaller but still fit. Anyway, wanted to get the perfect diameter jet from Zex, called Zex and first wanted to confirm a 75 dry shot is a .38 jet....no it is not they said. Its a .40 jet. I assumed it was as a 50 dry shot js a .32 jet. Interesting that a 35 shot is a .30 jet. So I didn't spray a 75 shot.....with the dry shots I believe its a different jet chart they look at...and they didn't show an amount for a .38 jet on their chart....65 shot? Dunno. But I'll have the .40 jet by Friday.
Just like plug gaps ... off by would you believe THAT much :D
Quote from: SHOdded on October 17, 2019, 10:47:10 AM
Just like plug gaps ... off by would you believe THAT much :D
Yeah it's crazy.
Quote from: SHOdded on October 16, 2019, 10:30:33 PM
Congratulations, could not ask for a better gift :D You will put to use superpowers that you never knew you had!
Quote from: bpd1151 on October 16, 2019, 10:39:57 PM
Quote from: shoNoff on October 16, 2019, 08:39:27 PM My wife gave birth to our first child 9/27. A beautiful baby boy. I haven't been this exhausted, tired, proud, excited in my life.
Congrats!
How incredibly cool. Time will go by so, so incredibly fast. Treasure each and every moment. Good, or bad. The latter coming in their teens.
Wife and I recently became empty nesters and I still often wonder where the time went.
Enjoy and revel in the life you created.
Sent from my SM-N950U using Tapatalk
Thank you both very much. Everyone that's has kids tells me how fast the time goes by. I mean he's 3 weeks today. It feels like just yesterday we hoped in the car and were headed to hospital. The super powers are for real. I didn't realize how little sleep a person actually needs to function. It's rather impressive lol.
Anyone try this home powder coating system out? Seems like a bargain, and all of the Youtube videos I find of it is turning out great looking powder coated parts.
https://www.eastwood.com/hotcoat-powder-coating/powder-coat-guns.html (https://www.eastwood.com/hotcoat-powder-coating/powder-coat-guns.html)
Looks promising. Wonder what their definition of "extremely durable" is.
I was a bit in panic mode since finding out i'm out of VP-M1,but luckily a reliable source directed me to a nearby NAPA auto store which confirmed has 11 pales in stock for $45.00 ea. Bit sigh of relief. Z :)
Cleaned 'em out did ya? :D :D :D
Quote from: SHOdded on October 22, 2019, 04:14:42 PM
Cleaned 'em out did ya? :D :D :D
Oh yeah!Lol. Z
(https://i.imgur.com/cWveaZV.gif)
Good article on How Do You Break in a Car's New Engine!! What About the Motor Oil. I found it interesting LMS was mentioned in this article! TOL. Z
Further ensuring a proper break-in, (Livernois Motorsports) puts special oil in all its rebuilt engines. This is just another way of ensuring they offer the best product possible to their customers.
For factory-fresh vehicles, this usually isn't the case. Accordingly, Schropp recommends early oil changes to help flush any undesirable metallic bits out of an engine's vital circulatory system. A lot of that cruft is "going to get caught in the oil filter," he said, but still, "I would change it after the first thousand miles.
https://www-autoguide-com.cdn.ampproject.org/v/s/www.autoguide.com/auto-news/2017/04/how-should-you-break-in-your-new-car-s-engine-.html/?amp_js_v=a2&_gsa=1&&usqp=mq331AQCKAE%3D#aoh=15717917496464&referrer=https%3A%2F%2Fwww.google.com&_tf=From%20%251%24s&share=https%3A%2F%2Fwww.autoguide.com%2Fauto-news%2F2017%2F04%2Fhow-should-you-break-in-your-new-car-s-engine-.html (https://www-autoguide-com.cdn.ampproject.org/v/s/www.autoguide.com/auto-news/2017/04/how-should-you-break-in-your-new-car-s-engine-.html/?amp_js_v=a2&_gsa=1&&usqp=mq331AQCKAE%3D#aoh=15717917496464&referrer=https%3A%2F%2Fwww.google.com&_tf=From%20%251%24s&share=https%3A%2F%2Fwww.autoguide.com%2Fauto-news%2F2017%2F04%2Fhow-should-you-break-in-your-new-car-s-engine-.html)
[TAKATA AIR BAG RECALL INFO]
https://www.autoguide.com/auto-news/2018/07/takata-airbags-recalls-everything-you-need-to-know.html (https://www.autoguide.com/auto-news/2018/07/takata-airbags-recalls-everything-you-need-to-know.html)
Regarding Livernois I can't agree with this: "This is just another way of ensuring they offer the best product possible to their customers." To each their own i suppose.
Sent from my LM-G710 using Tapatalk
LOL @ the so called "special oil".
Just like so many other things associated with that vendor, I wouldn't place much weight in any of their advertising fluff.
We all know better now. Myself included.
Sent from my SM-N950U using Tapatalk
Quote from: ZSHO on October 22, 2019, 09:11:01 PM
Good article on How Do You Break in a Car's New Engine!! What About the Motor Oil. I found it interesting LMS was mentioned in this article! TOL. Z
Further ensuring a proper break-in, (Livernois Motorsports) puts special oil in all its rebuilt engines. This is just another way of ensuring they offer the best product possible to their customers.
For factory-fresh vehicles, this usually isn't the case. Accordingly, Schropp recommends early oil changes to help flush any undesirable metallic bits out of an engine's vital circulatory system. A lot of that cruft is "going to get caught in the oil filter," he said, but still, "I would change it after the first thousand miles.
https://www-autoguide-com.cdn.ampproject.org/v/s/www.autoguide.com/auto-news/2017/04/how-should-you-break-in-your-new-car-s-engine-.html/?amp_js_v=a2&_gsa=1&&usqp=mq331AQCKAE%3D#aoh=15717917496464&referrer=https%3A%2F%2Fwww.google.com&_tf=From%20%251%24s&share=https%3A%2F%2Fwww.autoguide.com%2Fauto-news%2F2017%2F04%2Fhow-should-you-break-in-your-new-car-s-engine-.html (https://www-autoguide-com.cdn.ampproject.org/v/s/www.autoguide.com/auto-news/2017/04/how-should-you-break-in-your-new-car-s-engine-.html/?amp_js_v=a2&_gsa=1&&usqp=mq331AQCKAE%3D#aoh=15717917496464&referrer=https%3A%2F%2Fwww.google.com&_tf=From%20%251%24s&share=https%3A%2F%2Fwww.autoguide.com%2Fauto-news%2F2017%2F04%2Fhow-should-you-break-in-your-new-car-s-engine-.html)
[TAKATA AIR BAG RECALL INFO]
https://www.autoguide.com/auto-news/2018/07/takata-airbags-recalls-everything-you-need-to-know.html (https://www.autoguide.com/auto-news/2018/07/takata-airbags-recalls-everything-you-need-to-know.html)
yeah my remmaned was just good old conventional 5-20.. changed the oil at 125 miles after severe light duty and found all sorts of shinnies in it and the filter. knowing what i know now i would have changed the oil at 25-30 miles and then again at 50 and again at 125 ..
Came across an article today that said the 2020 Shelby will have an optional carbon package for only 18,500 dollars extra! What interested me was that in that package are carbon fiber wheels.
Here is the article if you want to check it out: https://www.yahoo.com/news/why-2020-ford-mustang-shelby-174000889.html (https://www.yahoo.com/news/why-2020-ford-mustang-shelby-174000889.html)
WELL I AM BACK, dropped the car off January 20 2019, got it back a few times
since then (and back it went) GOT IT back Saturday, and the drama/saga continues:
Slow leak (due to a Nail) left rear, so off to the shop i go (air tank, tools etc) waited to
air it up Monday morning, brought to 2 tire places (first can u leave it?) second one:
we only do an internal patch @ 24.95 (yea OK, I have to get to work), and what did they do
ripped a hole in the side wall trying to take it off. Ordered me a new Pzero (no charge),AND will not be there till tomorrow (my head hurts).
SO get the House Frau to come get me, off to the shop to get the 2 NEW I had in stock.
and goth them to mount em for free (and NOW one NEW oddball, half the day is gone) .
so today i ask them to order me another one
(318.00 out the door), and then i have a complete NEW set.
that 24.95 patch, now cost me about 650.00.
SO CALL ME EMO, AND as I have been gone SOO LONG, some one bring me up to speed,
let me know where the "I have broken everything" post is so i can update everyone
about the last Nine months of Broken Dreams :nuclear:
Here ya go
https://www.ecoboostperformanceforum.com/index.php/topic,9851 (https://www.ecoboostperformanceforum.com/index.php/topic,9851)
I guess being there at the right time caught a very rare glimpse for any such car enthusiast at NYC! Z :) PAGANI ANYONE!
(https://i.imgur.com/qloBP7Th.jpg)
(https://i.imgur.com/zHKRvI8h.jpg)
I think I found the source of the clunking sound issue on the front driver's side. I did not have a chance to measure the wheel well clearance but noticed the driver's side is slightly lower in comparison to the passenger side!
It could be a faulty Strut or strut mount,but will need to check the Strut tower bolt and remove the wheel to validate concern.
I think a wheel alignment is also warranted based on the Pics below AFAIK!
I'm hoping to have this fixed Prior to this weekend Track event. Z
Good article on the New PI! Z
You (probably) can't outrun the new 400-hp Ford Police Interceptor
https://www.hagerty.com/articles-videos/articles/2019/01/04/new-400-hp-ford-police-interceptor (https://www.hagerty.com/articles-videos/articles/2019/01/04/new-400-hp-ford-police-interceptor)
I have been trying to catch up on some DIY Home repairs as per wife! I felt like I was adding another Meth nozzle,along with some PTFE for good measures. LOL. Z :D
LOLOLOL
Quote from: ZSHO on November 05, 2019, 04:37:06 PM
I guess being there at the right time caught a very rare glimpse for any such car enthusiast at NYC! Z :) PAGANI ANYONE!
(https://i.imgur.com/qloBP7Th.jpg)
(https://i.imgur.com/zHKRvI8h.jpg)
Bubble wrapped tires .. THAT is when you know you hit the big time.
Makes for a good time at 190 mph!
Apparently my steering column in the MKS doesn't like cold weather. On 1st start of the day it creaks like my knees lol. Would lubing it somewhere take care of this and if so what should I use? I'll add that this is in low 40s to upper 30s so I can't imagine what it would sound like in single digits.
Sent from my LM-G710 using Tapatalk
Quote from: Black Dream on November 14, 2019, 09:58:18 AM
Apparently my steering column in the MKS doesn't like cold weather. On 1st start of the day it creaks like my knees lol. Would lubing it somewhere take care of this and if so what should I use? I'll add that this is in low 40s to upper 30s so I can't imagine what it would sound like in single digits.
Sent from my LM-G710 using Tapatalk
Remove the shroud and add some white lithium grease (tube) would be ideal IMO! Z
Thanks Z, I have some in the garage already.
Sent from my LM-G710 using Tapatalk
This early morning was driving roughly 40mph and noticed this new Audi in front and all of a sudden it stops abruptly without delay with no brake lights NADA causing me to maneuver the SHO on the other lane and was one close call!!! But luckily with the SHO fine tuned suspension was able to thankfully dodge a bullet by inches... :pat:
It looked like the Audi cut power to the wheels AFAIK!
It was certainly a wake up call and to close for comfort. Z
Quote from: ZSHO on November 16, 2019, 09:40:59 AM
This early morning was driving roughly 40mph and noticed this new Audi in front and all of a sudden it stops abruptly without delay with no brake lights NADA causing me to maneuver the SHO on the other lane and was one close call!!! But luckily with the SHO fine tuned suspension was able to dodge a bullet...
It looked like the Audi cut power to the wheels AFAIK!
It was certainly a wake up call and to close for comfort. Z
Someone above is looking out for you for sure! Between this and your brakes going out one has to come to some kind of conclusion.
Sent from my iPhone using Tapatalk
Quote from: StealBlueSHO on November 16, 2019, 09:54:01 AM
Quote from: ZSHO on November 16, 2019, 09:40:59 AM
This early morning was driving roughly 40mph and noticed this new Audi in front and all of a sudden it stops abruptly without delay with no brake lights NADA causing me to maneuver the SHO on the other lane and was one close call!!! But luckily with the SHO fine tuned suspension was able to dodge a bullet...
It looked like the Audi cut power to the wheels AFAIK!
It was certainly a wake up call and to close for comfort. Z
Someone above is looking out for you for sure! Between this and your brakes going out one has to come to some kind of conclusion.
Sent from my iPhone using Tapatalk
Good memory and True indeed! Thanks. Z
Glad you are ok, Z, one heck of a moment to have lived through. This is what the benefit of years of experience + quick reflexes boils down to.
Well done Z! That's one of those split seconds not paying attention that results in disaster. Excellent defense! Good thing no car in the other lane as well!
Quote from: SHOdded on November 16, 2019, 12:37:33 PM
Glad you are ok, Z, one heck of a moment to have lived through. This is what the benefit of years of experience + quick reflexes boils down to.
Thanks Manu! I must have more than nine lives. Based on the rear view mirror the woman looked quite disgruntled. I try to think Positive and move ahead especially under these type of circumstances. Z
May the Gods always ride with you :)
Quote from: 802SHO on November 16, 2019, 01:05:49 PM
Well done Z! That's one of those split seconds not paying attention that results in disaster. Excellent defense! Good thing no car in the other lane as well!
These old reflexes still got it! :D Thanks buddy. Z
Nice save Z, it's times like that that let you know you've still got it no matter what your age ( ; Our VIN numbers are so close, I think my car probably felt it. I'm up to 75k miles without a hiccup, let's see how long we can keep things intact.
Quote from: 6500rpm on November 16, 2019, 05:44:04 PM
Nice save Z, it's times like that that let you know you've still got it no matter what your age ( ; Our VIN numbers are so close, I think my car probably felt it. I'm up to 75k miles without a hiccup, let's see how long we can keep things intact.
That's so funny cause just hit 75K myself. The SHO is a keeper for sure and hopefully can pass it on to the next-generation. Thanks Brother. Z :)
Godspeed to BOTH of you :D
Its members and friends like you that make this Forum that much more welcoming to say the least... Thanks for the warm wishes. Z :)
Well, here's a mind blower. I find myself sitting in the delivery room waiting room watching the last NASCAR race of the year. My oldest daughter went into labor about 2hrs ago. The only question is do I become a grandpa or does the race end first!
Quote from: 6500rpm on November 17, 2019, 04:08:01 PM
Well, here's a mind blower. I find myself sitting in the delivery room waiting room watching the last NASCAR race of the year. My oldest daughter went into labor about 2hrs ago. The only question is do I become a grandpa or does the race end first!
Either way you win in my book honestly. Congrats on the new arrival!
Almost 18 hrs later, I got to meet my 1st grandson. First life lesson ' s going to have to be something on the lines of being on time but everyone is well (less a lot of sleep). Thanks guys for giving me lots to read to help pass the time.
Congrats!!! First grandchild?
Congrats indeed. Best wishes to the family. Z :)
I had to take a quick Pic of this mobile pet service van! I think the name of the Co is "Kleen Nuts"! LMAO. Z :rofl2:
New video from Brian (FTM) on the best undercoating for your vehicle. Z :)
https://youtu.be/W06WX6JRGM8 (https://youtu.be/W06WX6JRGM8)
https://www.amazon.com/Woolwax-Gallon-Undercoating-Bundle-Color/dp/B07QXGBRGQ/ref=as_li_ss_tl?keywords=woolwax&qid=1574266015&sr=8-24&linkCode=sl1&tag=fordt-20&linkId=6d85a8066c235e0dc8d3dea9663a3394&language=en_US (https://www.amazon.com/Woolwax-Gallon-Undercoating-Bundle-Color/dp/B07QXGBRGQ/ref=as_li_ss_tl?keywords=woolwax&qid=1574266015&sr=8-24&linkCode=sl1&tag=fordt-20&linkId=6d85a8066c235e0dc8d3dea9663a3394&language=en_US)
FREE Sirius-xm Travel link now through
Thansgiving day weekend December 2nd! Enjoy. Z :)
Good morning. If anyone is in the market for a used vehicle and would like more INFO on the History report I fortunately have access to CAR FAX absolutely for FREE. :)
Please dont hesitate to shoot me a Pm or reply here on the Board with the Full applicable Vin number! Happy Holidays everyone. Z :xmas: :xmas:
I do know a few people pining for this information. Might just pelt you with requests LOL.
EDIT: Looks like the floodgates have been opened. Hope you have a life raft :D
Bombs away. Lol. :D Please give me some time to repond accordingly. TIA. Z
Quote from: ZSHO on December 13, 2019, 11:06:53 AM
Bombs away. Lol. :D Please give me some time to repond accordingly. TIA. Z
Certainly will. I am going to give a cutoff of 5 PM EST. Then it's all locked up. 11 so far. Will PM you :thumb:
PM sent, kind sir!
Pm'd you a few links for the time being. I hope the links are in working order! I will certainly try later tonight or tomorrow if permitted! I apologize for any inconvenience. Z
(https://uploads.tapatalk-cdn.com/20191214/68748f22901c7126657b5d96717751b5.jpg)
On my way to probably pick up a FiST to add to the EB fleet...
Here's the smoking gun to go with
(https://www.ecoboostperformanceforum.com/index.php?action=dlattach;topic=463.0;attach=21937;image)
(https://uploads.tapatalk-cdn.com/20191214/d005b1bd4df78b71a2ed208dd0297159.jpg)
Added another EB to the stable...
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20191214/89c1bb4976b15235329fa26af13972f2.jpg)
Home!
Sent from my iPhone using Tapatalk
I think you should have decals made, rather large at that, and prominently place them on the doors of both sides of the car.
Nice FIST!!!!(https://uploads.tapatalk-cdn.com/20191214/06a8631848ae7b41594621f47e588ece.jpg)
Sent from my SM-N950U using Tapatalk
Quote from: bpd1151 on December 14, 2019, 04:20:30 PM
I think you should have decals made, rather large at that, and prominently place them on the doors of both sides of the car.
Nice FIST!!!!(https://uploads.tapatalk-cdn.com/20191214/06a8631848ae7b41594621f47e588ece.jpg)
Sent from my SM-N950U using Tapatalk
Thanks! Perhaps I will.... lol
Sent from my iPhone using Tapatalk
I'm really tired of all the time I've taken to write a post just to have it not upload/go through....I don't understand why it works and sometimes doesnt but you never know when it won't. Its happened one too many times. After hitting post my post was stuck in limbo for over 25 min.....took a screen shot to save it for later. Adding pics seems to really be the culprit. Its rather annoying. A trick is to only use one pic...immediatly after edit each additional pic at a time, or if no pics will work...post written part, edit in pics after....but WHY LOL! Sending from phone, never from PC..is that also part of the problem?
Sorry to hear that! No issues here,but always try hitting "preview" PRIOR To submitting your "Post" button in order to review the Pics.
Feel free to post your inquiries here. Z
https://www.ecoboostperformanceforum.com/index.php/board,39.0.html (https://www.ecoboostperformanceforum.com/index.php/board,39.0.html)
Quote from: ZSHO on December 19, 2019, 06:44:42 AM
Sorry to hear that! No issues here,but always try hitting "preview" PRIOR To submitting your "Post" button in order to review the Pics. Z
Feel free to post your inquiries here...
https://www.ecoboostperformanceforum.com/index.php/board,39.0.html (https://www.ecoboostperformanceforum.com/index.php/board,39.0.html)
I'll try that next time. It was this am trying to start getting my build thread caught up, tried posting a written post with 6 pics.
Testing on my phone! Z
(http://i.imgur.com/d4oOO4kh.jpg)(http://i.imgur.com/3E6S4b0h.jpg)
(http://i.imgur.com/O30rSDkh.jpg)(http://i.imgur.com/Id985OVh.jpg)(http://i.imgur.com/bLyNC4uh.jpg)(http://i.imgur.com/ao1JuRrh.jpg)(http://i.imgur.com/noAWUn9h.jpg)(http://i.imgur.com/f7YaK97h.jpg)
A most excellent test subject too!
Quote from: SHOdded on December 19, 2019, 07:05:28 AMA most excellent test subject too!
Hell yea, agreed!!!
:drool:
Sent from my SM-N950U using Tapatalk
Andrew, I have issues on my phone too. Uploading more then three pictures with the actual file upload screws it up. I refuse to use a third party to upload my pics so I can post them. I wish this forum used the picture upload like SHOForum.
Quote from: bpd1151 on December 19, 2019, 08:37:44 AM
Quote from: SHOdded on December 19, 2019, 07:05:28 AMA most excellent test subject too!
Hell yea, agreed!!!
:drool:
Sent from my SM-N950U using Tapatalk
100% agree, I think my engine bay is clean......Z's is immaculate.
It appears the money hungry Photo Bucket is Totally down for the past few days!
I also noticed a few members Profile PICS associated with PH are MIA!
Its quite a Sham IMO...
https://downdetector.com/status/photobucket/ (https://downdetector.com/status/photobucket/)
But truly Glad to report that our Hosting site www.Imgur.com (http://www.imgur.com) is working without a hitch. Z :)
https://www.ecoboostperformanceforum.com/index.php/topic,8555.0.html (https://www.ecoboostperformanceforum.com/index.php/topic,8555.0.html)
Live Long and Prosper, imgur!
Has anyone tried the new improved Platinum version of the BG-44K Fuel system cleaner made specifically for GDI engines!
I usually throw a can of BG or bottle of Chevron with techron fuel system cleaner @ every oil change interval for good measures . Z
BG-44K Fuel system cleaner. $25.99. Ea
https://www.amazon.com/BG44K-BG-44k-PLATINUM-New/dp/B07PXCTPV7/ref=mp_s_a_1_1?keywords=bg+44k+platinum+new&qid=1577802637&sprefix=++BG+44k+PLATINUM+New&sr=8-1 (https://www.amazon.com/BG44K-BG-44k-PLATINUM-New/dp/B07PXCTPV7/ref=mp_s_a_1_1?keywords=bg+44k+platinum+new&qid=1577802637&sprefix=++BG+44k+PLATINUM+New&sr=8-1)
Chevron Techron Concentrate Plus Fuel System Cleaner - 20 oz - $7.99. ea
https://www.amazon.com/Chevron-Techron-Concentrate-System-Cleaner/dp/B00092893E/ref=mp_s_a_1_3?keywords=chevron+techron&qid=1577803230&sprefix=chevron+&sr=8-3 (https://www.amazon.com/Chevron-Techron-Concentrate-System-Cleaner/dp/B00092893E/ref=mp_s_a_1_3?keywords=chevron+techron&qid=1577803230&sprefix=chevron+&sr=8-3)
I have seen it around but not used it. in any case, I do not have a GDI vehicle :( On a side note, Techron does claim to have some cleaning effect on the backs of the intake valves, so BG should do it even better.
Quote from: SHOdded on December 31, 2019, 09:56:21 AM
I have seen it around but not used it. in any case, I do not have a GDI vehicle :( On a side note, Techron does claim to have some cleaning effect on the backs of the intake valves, so BG should do it even better.
Direct injection is great... but the ''by design valve coking'' is awful.
I'm unsure how this would clean intake valves unless you literally poured it in the intake ala seafoam style.. were not atkinson engines as far as i know so our valves are closed before the injection begin? am i wrong? ..
And im a huge fan of no effing way do i want large chunks of hardened carbon being cycled though chamber and out THROUGH the cats.
The idea would be continuous cleaning for 1 tankful which would clean out accumulated SOFT carbon. What you are thinking of would build up over multiples of 10s of thousands of miles not over 3,000 miles. Ford has done a pretty good job with the PCV system on the SHO for the most part.
New video from Brian (FTM) On Ford EcoBoost Cold start rattle explained. Z
https://youtu.be/4t-Fik8-bUQ
Quote from: ZSHO on January 07, 2020, 09:43:51 AM
New video from Brian (FTM) On Ford EcoBoost Cold start rattle explained. Z
https://youtu.be/4t-Fik8-bUQ
Saw that too. I'm subscribed to his channel as well.
I couldnt pass this offer and purchased a couple of jugs courtesy of SHOdded and quite certain it will meet or exceed expectations.. :)
Maxx Oil 5W20 Pro Max Fully Synthetic Motor Oil - 5 quart. Z
$16.67-ea. was $39.40
https://www.walmart.com/ip/Maxx-Oil-5W20-Pro-Max-Fully-Synthetic-Motor-Oil-5-quart/206264022?athcpid=206264022&athpgid=athenaItemPage&athcgid=null&athznid=PWVAV&athieid=v0&athstid=CS020&athguid=cf078f20-538-16f86f0b8c0ed6&athancid=null&athena=true (https://www.walmart.com/ip/Maxx-Oil-5W20-Pro-Max-Fully-Synthetic-Motor-Oil-5-quart/206264022?athcpid=206264022&athpgid=athenaItemPage&athcgid=null&athznid=PWVAV&athieid=v0&athstid=CS020&athguid=cf078f20-538-16f86f0b8c0ed6&athancid=null&athena=true)
3D MAXpider Complete Set Custom Fit All-Weather Floor Mat for Select Ford Taurus Models - Kagu Rubber (Black) $69.96
https://www.amazon.com/3D-MAXpider-Complete-Custom-All-Weather/dp/B006YBBZP8/ref=sr_1_1?keywords=3D+MAXpider+Complete+Set+Custom+Fit+All-Weather+Floor+Mat+for+Select+Ford+Taurus+Models+-+Kagu+Rubber+%28Black%29&qid=1578951441&s=automotive&sr=1-1 (https://www.amazon.com/3D-MAXpider-Complete-Custom-All-Weather/dp/B006YBBZP8/ref=sr_1_1?keywords=3D+MAXpider+Complete+Set+Custom+Fit+All-Weather+Floor+Mat+for+Select+Ford+Taurus+Models+-+Kagu+Rubber+%28Black%29&qid=1578951441&s=automotive&sr=1-1)
Well guys, guess things happen for a reason. Last week I received a text message from the president of the company I used to work for. I meet with him last Thursday and he wanted to offer me the maintenance position. The current maintenance man is retiring next year. I was shocked and he offered me a very good starting rate, and would go up when I would takeover the head position. Talked with my wife about the offer. Her and I had another meeting this past Monday night, to go over a couple items that we wanted to address. I will get my vacation time back, almost 4 weeks, flexible working hours, and he was very adamant about me not working alot of weekends. So I accepted the position, I start the 27th of this month.
I wasn't looking for a new job, but this was a very good opportunity. I will be getting a $9hr raise over my current job. So here is to another major can, and lots of learning and schooling which they will pay for.
That is great to hear, Brian! Couldn't happen to a better guy :)
Good luck, onward & upward.
New video from Brian (FTM) on leaks and more leaks. Z
https://youtu.be/dYb6lQG4Jzw
New video from Brian (FTM) on leaks and more leaks. Z
https://youtu.be/dYb6lQG4Jzw
Getting ready for Daytona 500 anyone. Z ;)
Don't forget your significant other tomorrow!!!
(https://uploads.tapatalk-cdn.com/20200213/67e89d40bf259d6f0192dae1dcb7d316.jpg)
Sent from my iPhone using Tapatalk
Supercalifragilisticexpialidocious. There. Random thought POPped into my head. :D
Quote from: SHOdded on February 19, 2020, 07:32:53 PM
Supercalifragilisticexpialidocious. There. Random thought POPped into my head. :D
Mine usually revolve around cars and half dressed women... but hey... everyone is different!
I am too old I guess. I am living my 2nd childhood.
I received the recall notice in the mail today. Z
(https://uploads.tapatalk-cdn.com/20200311/0a061c0f8a8fd4c18477ddbb38d04fd9.jpg)
Me too...
Quote from: StealBlueSHO on March 11, 2020, 06:23:32 AM
(https://uploads.tapatalk-cdn.com/20200311/0a061c0f8a8fd4c18477ddbb38d04fd9.jpg)
Me too...
The parts should be available in 3rd quarter!! Z
Yep I got mine on the website.
(https://uploads.tapatalk-cdn.com/20200317/c3528439275c004efebe39dbdb354336.plist)
Happy St. Patrick's Day from quarantine!!!!!!
Quote from: StealBlueSHO on March 17, 2020, 06:51:29 PM
(https://uploads.tapatalk-cdn.com/20200317/c3528439275c004efebe39dbdb354336.plist)
Happy St. Patrick's Day from quarantine!!!!!!
AWE! Keep the Spirits Up SBS. Z :beer2:
NASCAR fans, FSHD is running a virtual race at Homestead right now that's pretty entertaining for what it is if you need a fix
Yeah watched it too, def was entertaining
TPMS: Ford Taurus, Police Sedan and Lincoln MKS, 2011-19 .Z :)
https://www.moderntiredealer.com/article/735920/tpms-ford-taurus-police-sedan-and-lincoln-mks-2011-19 (https://www.moderntiredealer.com/article/735920/tpms-ford-taurus-police-sedan-and-lincoln-mks-2011-19)
I have been quarantined in the bathroom for the past couple of weeks as per wife! Lol. :D
I finally renovated the bathroom with new plumbing along with porcelain tiles from Spain and vanity plus hardware etc. :) Be well. Z
That is GORGEOUS! Don't know how it smells tho :D :P :P
Wow nice job Z! Looks perfect.
Looks great Z, glad you had something to keep you busy now.
Thanks for the kind words from ^^^ :) Bit of creativity goes a long way. Z
Free Oil Change for April courtesy of my local Ford dealer. Z :)
With exceptional offers all month long, now is a great time to visit Ford Lincoln for an oil change and filter replacement for your TAURUS. No Contact Service and Free Pickup and Delivery. Our certified technicians can help diagnose issues so you can depend on your vehicle for miles to come.
Schedule your appointment today for limited-time offers during the month of April.
Oil and Filter Change
Free
Includes: up to five quarts of oil, genuine oil filter, inspection and adjustment of fluid levels.
What does everyone with a warranty do for oil changes at the dealer? Go back to stock (revert HPFP and go back to 2 bar) or let it ride? I'm assuming with the new HPFP sticking out, they might figure out that it's been modded a bit, but wasn't sure how much they paid attention to it.
Let it ride. Personally I am going to modify the foam pad/cover and SHO engine cover when I purchase my XDi-35.
Quote from: WinPlaceSHO on April 08, 2020, 02:08:07 PM
What does everyone with a warranty do for oil changes at the dealer? Go back to stock (revert HPFP and go back to 2 bar) or let it ride? I'm assuming with the new HPFP sticking out, they might figure out that it's been modded a bit, but wasn't sure how much they paid attention to it.
Don't go to the 'dealer' itself, the warranty is usually built around "Ford qualified" shops rated for in network fixes... just find one they and you both like that could care less about the modding.
They state in their "lifetime power train warranty" that all oil changes must be done at one of their two dealerships.
I would rather go elsewhere.
Sent from my SM-N960U using Tapatalk
Here is my very own exclusive DIY on making your own Face mask especially with a shortage through this virus.
Here is a fancy prototype,but you can use a basic padded Bra for added convenience. I ultimately ended up making 2 masks from one bra. Z
Quote from: ZSHO on April 11, 2020, 12:56:39 PM
Here is my very own exclusive DIY on making your own Face mask especially with a shortage through this virus.
Here is a fancy prototype,but you can use a basic padded Bra for added convenience. I ultimately ended up making 2 masks from one bra. Z
I guess you've been to the carnival!(https://uploads.tapatalk-cdn.com/20200411/0a3e72770f6b519bc5db6d16991658aa.gif)
Sent from my SM-G986U using Tapatalk
I'm trying to shine some glimmer,but also being a bit creative during these tough times. Z
Great New video from (FTM) on the PTU. Z :)
https://youtu.be/7yLkr609bfI
I think I have found an alternative Factory OEM BOV which ultimately wear and tear sooner than later causing a host of issues to arise. Z
Turbosmart BorgWarner EFR and Ford EcoBoost Kompact Shortie Plumb Back Recirculating BOV..
$169.99
https://www.full-race.com/store/borg-warner-efr/efr-components/turbosmart-kompact-plumb-back-1/ (https://www.full-race.com/store/borg-warner-efr/efr-components/turbosmart-kompact-plumb-back-1/)
i'm coming up on going 4 weeks since I filled my gas tank... pretty crazy. I typically fill up once a week but I've been teleworking for almost 4 weeks now.
I just noticed I hit 70K on the SHO and IMHO probably the best reliable vehicle I have owned to date! I purchased it brand new back on 8/13 with 2 miles on the OD.. :)
I guess being a bit Ocd on maintenance aspect and all,still in the preliminary stages of breaking her in! :D
I hope everyone and their familys are doing well. Z
Quote from: ZSHO on April 26, 2020, 05:24:25 PM
I just noticed I hit 70K on the SHO and IMHO probably the best reliable vehicle I have owned to date! I purchased it brand new back on 8/13 with 2 miles on the OD.. :)
I guess being a bit Ocd on maintenance aspect and all,still in the preliminary stages of breaking her in! :D
I hope everyone and their familys are doing well. Z
Almost identical story. Now at 65k miles, I rolled my 2015 off the showroom floor new and it has never had to go back to the dealer for anything since. I did the fuel pump module recall myself and got reimbursed for it. I've owned a lot of cars and never a fault free one as this. I'm going to miss it when I move on.
(https://uploads.tapatalk-cdn.com/20200501/211bef6bcd0d1e2a0dadfb70db16ec45.jpg)
It's a good day!
Quote from: jims2015 on April 27, 2020, 09:56:35 AM
Quote from: ZSHO on April 26, 2020, 05:24:25 PM
I just noticed I hit 70K on the SHO and IMHO probably the best reliable vehicle I have owned to date! I purchased it brand new back on 8/13 with 2 miles on the OD.. :)
I guess being a bit Ocd on maintenance aspect and all,still in the preliminary stages of breaking her in! :D
I hope everyone and their familys are doing well. Z
Almost identical story. Now at 65k miles, I rolled my 2015 off the showroom floor new and it has never had to go back to the dealer for anything since. I did the fuel pump module recall myself and got reimbursed for it. I've owned a lot of cars and never a fault free one as this. I'm going to miss it when I move on.
I would agree with this but it can get dicey after 100k.
I suspected this going into the MKS but it still had plenty of ESP, and thank God, warranty is up now but we definitely got our moneys worth and a whole lot more.
She should be GTG for another 100k now unless I do something inadvisable which is always a possibility...
:shortbus:
:blowup:
:Picard2:
(https://uploads.tapatalk-cdn.com/20200522/a4cbf0b7c7fd5bcbdaa8a8df4e1ec47a.jpg)
Got my kids a new LEGO set..... just sayin...
Sent from my iPhone using Tapatalk
That's actually kind of neat there BJ.
Sent from my SM-N950U using Tapatalk
New video from (FTM) on the latest Taurus/Explorer Recall 19S17 & 20SO4 on Rear Toe link failure and what to expect!
I hope everyone is doing well. Z :)
https://youtu.be/UC3LpalmkKc
Quote from: StealBlueSHO on May 21, 2020, 10:11:55 PM
(https://uploads.tapatalk-cdn.com/20200522/a4cbf0b7c7fd5bcbdaa8a8df4e1ec47a.jpg)
Got my kids a new LEGO set..... just sayin...
Sent from my iPhone using Tapatalk
I remember the transformer decals from many years ago! Enjoy the Legos my friend. Z :)
Quote from: ZSHO on May 23, 2020, 09:12:37 AM
New video from (FTM) on the latest Taurus/Explorer Recall 19S17 & 20SO4 on Rear Toe link failure and what to expect!
I hope everyone is doing well. Z :)
https://youtu.be/UC3LpalmkKc
Most excellent post Z, everyone should give this a watch.
Quote from: 6500rpm on May 23, 2020, 03:50:55 PM
Quote from: ZSHO on May 23, 2020, 09:12:37 AM
New video from (FTM) on the latest Taurus/Explorer Recall 19S17 & 20SO4 on Rear Toe link failure and what to expect!
I hope everyone is doing well. Z :)
https://youtu.be/UC3LpalmkKc
Most excellent post Z, everyone should give this a watch.
Thanks Brother! Definitely a must watch for any SHO/Explorer owner.
Here are a couple great informative threads. Z
https://www.ecoboostperformanceforum.com/index.php?topic=7650.msg115836#msg115836
http://www.ecoboostperformanceforum.com/index.php/topic,7087.msg115835.html#msg115835
http://www.ecoboostperformanceforum.com/index.php/topic,7536.msg115013.html#msg115013
Ford -Lateral Link
https://www.tascaparts.com/oem-parts/ford-lateral-link-de9z5a972c
Tired of tires...... running out of room due to car parts.... and these are not helping...
(https://uploads.tapatalk-cdn.com/20200606/41bc0f96f652a2d9af430377507f162b.jpg)
Sent from my iPhone using Tapatalk
I have 3 stacks of 4.......
Well the family took on the task if redoing our deck this past weekend. We replaced the old pressure treated flooring with Trex. Also colored stained the rails are well as replaced some bad supports. First time using Trex, it actually went better than expected. Also found out by accident that only the 12ft and 16ft boards have the slots cut for there hidden fasteners. So here are some before and after pics.
(https://uploads.tapatalk-cdn.com/20200609/1937df168e0c3c57fd29a66c9b61e1f9.jpg)
Going for the record!!!
Sent from my iPhone using Tapatalk
FYI guys. Stupid Fuel Pump Module bit me in the butt this weekend at Nationals. It was already the updated part from Ford. Had to have my dad come and tow the SHO home. I ordered a Dorman module from Autozone to get the car moving. It's around 50.00 for it. Guess it's cheap insurance to have a spare in the car, so you don't get stranded like my wife and I did.
Yeah it ruined what was a awesome weekend.
Whoa, wait a minute......
What exactly bit you in the butt?(https://uploads.tapatalk-cdn.com/20200805/36487e9542c058144b8f121dda827bed.gif)
Sent from my SM-N950U using Tapatalk
I got the OEM LPFP Relay for $70 from my local dealer. It is definitely worth while throwing one in the glove box and you dont need tools to at least plug it in and get home.
My 2014 Nissan Juke Nismo RS. I have an OEM Boost solenoid in the glove box. Same idea.
THIS IS IT, What i have moved on to: 2016 Audi S3,
Fully Done Up (by someone other than Me or my guys)
400 HP, 7K, Miles and i stole it. 3200 LBS. I am in love
but a tad Low to the Ground, hard to get in and out of.
And up on the rack till i get the Metal Oil Pan to replace plastic One
(https://uploads.tapatalk-cdn.com/20200820/dc8337990546aa1f0a0b178adeba207f.jpg)
Good ol days back when it was new and exciting!!
(https://uploads.tapatalk-cdn.com/20200911/1441e488881a804d7e0cdc953ae7a52d.jpg)
Quote from: StealBlueSHO on September 10, 2020, 09:47:42 PM
Good ol days back when it was new and exciting!!
(https://uploads.tapatalk-cdn.com/20200911/1441e488881a804d7e0cdc953ae7a52d.jpg)
Time to go back to meth....you know you want to! I've never used a pump to add fluid...hmm looks easier...or perhaps less drippy drippy. Idk why but any VP 5 gal Pale starts a tiny drip from the spout that accumulates on the lip of the can then starts dripping...don't know why it does that.
Sent from my iPhone using Tapatalk
Your missing your meth hit. You know you want it, need it.
Quote from: 802SHO on September 11, 2020, 06:50:58 AM
Quote from: StealBlueSHO on September 10, 2020, 09:47:42 PM
Good ol days back when it was new and exciting!!
(https://uploads.tapatalk-cdn.com/20200911/1441e488881a804d7e0cdc953ae7a52d.jpg)
Time to go back to meth....you know you want to! I've never used a pump to add fluid...hmm looks easier...or perhaps less drippy drippy. Idk why but any VP 5 gal Pale starts a tiny drip from the spout that accumulates on the lip of the can then starts dripping...don't know why it does that.
Sent from my iPhone using Tapatalk
That pump was a life saver... it made adding meth stupid clean... never had a drop leak... didn't have to pickup the pails...
That hand pump lasted 2 years I think before the meth ate the seals...
Maybe I will add meth later...
So I was watching this ocean show with my daughter on disney+ and it was talking about all these dangerous jelly fish in the ocean right? Well I was wondering, why don't we ever talk about peanutbutter fish eh? I think it's about time we give them the spot light. #Peanutbutterfishmattertoo
I generally try to keep things PG here...
BUT!!! Sometimes you run across a PG-13 item that needs be shared..
(https://uploads.tapatalk-cdn.com/20201004/184f428cfa8b2687e5e14c0536f98c6f.jpg)
That's flip'n awesome BJ
Sent from my SM-N950U using Tapatalk
Hiya, folks! Just checking in!
Got my winter wheels installed yesterday, and the Exploder is all set to be dropped off this evening for another dealer visit. On the agenda for this week: 1) Code P0020, 2)Flooded passenger floorboard after last Monday's torrential downpour - origin unknown, 3) Driveline (presumably) whirring/whining/humming - I suspect maybe the PTU is finally on its way out, and 4) an annoying squealing steering wheel. It sounds like there's a dying chipmunk in there, lol.
I'm liking the refreshed look of the boards, btw! I haven't been here in a while, but I think of you guys often, and glad to see you're still around! :)
-Mikey
Traded in the 2017 JKU for the 2021 JLU 80th Anniversary Edition...(https://uploads.tapatalk-cdn.com/20201022/b15a2c5ba6fe8b0eb73ab512ebf5ef4d.jpg)
(https://uploads.tapatalk-cdn.com/20201022/7bd1b30718dcf8e8824e1294798fefcc.jpg)
(https://uploads.tapatalk-cdn.com/20201022/1f2a82cf8ee0a9d7a340900b0b757512.jpg)
(https://uploads.tapatalk-cdn.com/20201022/38c2f828a450672b1d535511d463db1e.jpg)
I like that green. It is sharp.
Went through 1000pcs of candy tonight!!!! Happy Halloween EBPF Family!!
(https://uploads.tapatalk-cdn.com/20201031/8a14f7ea81f1edff9bbe1767194cfb7a.jpg)
(https://uploads.tapatalk-cdn.com/20201031/b46dd69fdd6be9c812fd1820100199a5.jpg)
Happy Halloween
Sent from my SM-N950U using Tapatalk
Quote from: StealBlueSHO on October 31, 2020, 07:28:44 PM
Went through 1000pcs of candy tonight!!!! Happy Halloween EBPF Family!!
(https://uploads.tapatalk-cdn.com/20201031/8a14f7ea81f1edff9bbe1767194cfb7a.jpg)
(https://uploads.tapatalk-cdn.com/20201031/b46dd69fdd6be9c812fd1820100199a5.jpg)
Glad to see Covid didn't hamper Halloween !!!
(https://uploads.tapatalk-cdn.com/20201103/4b33bfbb48a063efe1378d4e94371eb6.jpg)
Boost weather!!! However too cold to go full send cause #tractionmatters :-(
FYI- I just received an updated letter from Ford stating the recall parts for the rear toe link are readily available and should schedule an Appt to have the recall performed at your earliest convenience!
I hope everyone is doing well. Z
My wife just gave me permission to go pick out my GT350 and she will buy the bow to put on it for Christmas...
I'll take your SHO......
Quote from: StealBlueSHO on November 22, 2020, 09:18:16 PM
My wife just gave me permission to go pick out my GT350 and she will buy the bow to put on it for Christmas...
(https://emoji.tapatalk-cdn.com/emoji848.png)
Oh damn, that sounds like a fun! Or a trap.....
Quote from: SM105K on November 23, 2020, 10:00:41 AM
Quote from: StealBlueSHO on November 22, 2020, 09:18:16 PM
My wife just gave me permission to go pick out my GT350 and she will buy the bow to put on it for Christmas...
(https://emoji.tapatalk-cdn.com/emoji848.png)
Oh damn, that sounds like a fun! Or a trap.....
Well... Sometimes traps are worth it lol..
Quote from: StealBlueSHO on November 22, 2020, 09:18:16 PM
My wife just gave me permission to go pick out my GT350 and she will buy the bow to put on it for Christmas...
(https://emoji.tapatalk-cdn.com/emoji848.png)
Your car is faster than a GT350, plus easier to get out of too.
Quote from: bamsho on November 23, 2020, 02:09:01 PM
Quote from: StealBlueSHO on November 22, 2020, 09:18:16 PM
My wife just gave me permission to go pick out my GT350 and she will buy the bow to put on it for Christmas...
(https://emoji.tapatalk-cdn.com/emoji848.png)
Your car is faster than a GT350, plus easier to get out of too.
Hmm... true on both counts but I'm not quite at the new balance shoe stage yet...
Radom thought is should I add another mod for my exterior? (not really a random thought because I always think of this)
Quote from: sprintss on December 11, 2020, 01:18:11 AM
Radom thought is should I add another mod for my exterior? (not really a random thought because I always think of this)
Yes!(https://media3.giphy.com/media/104ueR8J1OPM2s/giphy.gif?cid=349c9dd7v4zm5gr48ksddg961nl42flj7b937m9c4mwdvo50&rid=giphy.gif)
Sent from my SM-G986U using Tapatalk