Title: $70 Catch Can system
Post by: Macgyver on February 21, 2018, 12:47:51 AM
Post by: Macgyver on February 21, 2018, 12:47:51 AM
Well I used stuff I had laying around. Bought stuff I didnt.
Bought two Ford junk yard hoses for the snap on ends. $10. Used a heat gun here to take the ends off and put them back on the new lines.
Bought 2 cheap Ebay $20 long Catch can Kits. Totally took apart the cans and added baffling and such to the insides. Extended intake side within the can with a deeper tube in the baffle. Sealed them up nice(JB Weld) and painted with Gloss black.
Split Spring clamps. Hoses. Splitloom. Misc parts. Elec tape. It all works. $10
Its a Macgyvers build for sure but it works. Its cheap but it looks decent without a magnifying glass.
I still gotta add some smaller split loom and electrical tape to finish it off.
Bought two Ford junk yard hoses for the snap on ends. $10. Used a heat gun here to take the ends off and put them back on the new lines.
Bought 2 cheap Ebay $20 long Catch can Kits. Totally took apart the cans and added baffling and such to the insides. Extended intake side within the can with a deeper tube in the baffle. Sealed them up nice(JB Weld) and painted with Gloss black.
Split Spring clamps. Hoses. Splitloom. Misc parts. Elec tape. It all works. $10
Its a Macgyvers build for sure but it works. Its cheap but it looks decent without a magnifying glass.
I still gotta add some smaller split loom and electrical tape to finish it off.
Title: Re: $70 Catch Can system
Post by: FoMoCoSHO on February 21, 2018, 01:34:46 AM
Post by: FoMoCoSHO on February 21, 2018, 01:34:46 AM
Does the engine cover still fit?
Title: Re: $70 Catch Can system
Post by: Macgyver on February 21, 2018, 12:40:19 PM
Post by: Macgyver on February 21, 2018, 12:40:19 PM
No it doesn't. I run without my cover anyway. I could get it to fit by shortening and lengthening the lines but I like it where its at.
This is an inexpensive system. It is a pieced together system and by No means is it going to compete with more expensive systems. I had to say it because I know what will happen here.
The cans are here. They are JUNK till you mod, baffle them, and seal them. They leak like a sieve. It doesnt take long. I just wanted the long style can for better baffling performance.
They went up $2 lol.
https://www.amazon.com/gp/product/B01JQB9RWA/ref=oh_aui_detailpage_o01_s00 (https://www.amazon.com/gp/product/B01JQB9RWA/ref=oh_aui_detailpage_o01_s00)
This is an inexpensive system. It is a pieced together system and by No means is it going to compete with more expensive systems. I had to say it because I know what will happen here.
The cans are here. They are JUNK till you mod, baffle them, and seal them. They leak like a sieve. It doesnt take long. I just wanted the long style can for better baffling performance.
They went up $2 lol.
https://www.amazon.com/gp/product/B01JQB9RWA/ref=oh_aui_detailpage_o01_s00 (https://www.amazon.com/gp/product/B01JQB9RWA/ref=oh_aui_detailpage_o01_s00)
Title: Re: $70 Catch Can system
Post by: FoMoCoSHO on February 21, 2018, 02:43:59 PM
Post by: FoMoCoSHO on February 21, 2018, 02:43:59 PM
Quote from: Macgyver on February 21, 2018, 12:40:19 PMI think paying more for pretty parts for our application is like putting lipstick on a pig.
No it doesn't. I run without my cover anyway. I could get it to fit by shortening and lengthening the lines but I like it where its at.
This is an inexpensive system. It is a pieced together system and by No means is it going to compete with more expensive systems. I had to say it because I know what will happen here.
The cans are here. They are JUNK till you mod, baffle them, and seal them. They leak like a sieve. It doesnt take long. I just wanted the long style can for better baffling performance.
They went up $2 lol.
https://www.amazon.com/gp/product/B01JQB9RWA/ref=oh_aui_detailpage_o01_s00 (https://www.amazon.com/gp/product/B01JQB9RWA/ref=oh_aui_detailpage_o01_s00)
Just ugly and terrible packaging.
So if it works as intended I'd prefer the $70.00 solution if i were inclined to add a catch can.
Title: Re: $70 Catch Can system
Post by: SHOdded on February 21, 2018, 03:17:12 PM
Post by: SHOdded on February 21, 2018, 03:17:12 PM
Quote from: FoMoCoSHO on February 21, 2018, 02:43:59 PMNot if the oinker carries bpd's brand. He doesn't believe in catch cans for the SHO anyway, so he is spared the agony of decision LOL.
I think paying more for pretty parts for our application is like putting lipstick on a pig.
Title: Re: $70 Catch Can system
Post by: Macgyver on February 21, 2018, 05:37:52 PM
Post by: Macgyver on February 21, 2018, 05:37:52 PM
Thats part of the reason I went with what I have. I made my own system for my 2014 Juke. They catch stuff. What a surprise. LOL
But since this isnt rocket science and you can go either way here without bad results. I think $70 is better than what UPR and others cost. Although UPR and others do look really well made.
But since this isnt rocket science and you can go either way here without bad results. I think $70 is better than what UPR and others cost. Although UPR and others do look really well made.
Title: Re: $70 Catch Can system
Post by: ThePresidential on June 03, 2022, 11:03:55 PM
Post by: ThePresidential on June 03, 2022, 11:03:55 PM
Do you need the catch can for the clean side if you have the cfm valve cover breather?
Title: Re: $70 Catch Can system
Post by: bpd1151 on June 04, 2022, 06:11:05 PM
Post by: bpd1151 on June 04, 2022, 06:11:05 PM
Quote from: SHOdded on February 21, 2018, 03:17:12 PMHa! Well, there's a shot over the proverbial bow if I have ever seen one. Funny!Quote from: FoMoCoSHO on February 21, 2018, 02:43:59 PMNot if the oinker carries bpd's brand. He doesn't believe in catch cans for the SHO anyway, so he is spared the agony of decision LOL.
I think paying more for pretty parts for our application is like putting lipstick on a pig.
Never would've expected that from Manoranjan Tayal (a.k.a. SHOdded) buy hey, can't say I haven't ever been surprised before!
That said, I actually have invested in the full send offering from UPR for the current build.
Guess I'll find out 1st hand if the investment was worth it, or not. Time will tell.
Sent from my SM-N986U1 using Tapatalk
Title: Re: $70 Catch Can system
Post by: ThePresidential on December 28, 2022, 05:47:06 PM
Post by: ThePresidential on December 28, 2022, 05:47:06 PM
Is it better to run bigger or smaller diameter hoses for your catch can system?
Title: Re: $70 Catch Can system
Post by: Macgyver on December 29, 2022, 12:07:40 AM
Post by: Macgyver on December 29, 2022, 12:07:40 AM
Whatever the OEM is fine. I would think smaller is not good for air vapor flow ?
Title: Re: $70 Catch Can system
Post by: ThePresidential on December 29, 2022, 04:58:09 PM
Post by: ThePresidential on December 29, 2022, 04:58:09 PM
Just wondering, im redoing mine to just one can and im putting it in a location where it will be cool to aid in vapor condensation inside the can. Ill be tapping into both turbos so ill be running more hose and wondering if that will affect evacuation?
Title: Re: $70 Catch Can system
Post by: Macgyver on December 29, 2022, 10:50:59 PM
Post by: Macgyver on December 29, 2022, 10:50:59 PM
What I learned with making mine. There are way better out there for the money. UPR and J&L for example.
I run a J&L on my Edge and it works very well. I think we think into it too much.
I run a J&L on my Edge and it works very well. I think we think into it too much.