I saw a drop and some film at the connector of the pipe that goes from the rear turbo to the IC. I found a small pool of oil in the pipe that goes to the throttle body. I went to look at the rear turbo and pulled the inlet pipe to it and it was dry. Unfortunately the outlet of the rear turbo points up so I can't tell it if is pooling there or not. I pulled the outlet off the front turbo and oil started running out. Maybe 10-12 drops, but that pipe was saturated. I pulled the inlet pipe to that turbo and it had a film, but no pooling there. Could I be looking at bad oil seals on the turbos?