Good Morning.
I'm going to replace the wheel hubs on my 2014 Ecoboost PI - I can move three of four of them at both the 9&3 and 12&6 o'clock positions when I jack up the car and have an annoying whooshing sound when I drive. I've got just over 100k on it now.
Can anyone tell me what size socket I need for the Axle Nut? From what I could find online, this could be one of several sizes, but I believe it to be a 32mm - is that correct and is it the same for both front and rear?
I believe it's a 32mm IIRC. Z
https://drive.google.com/file/d/0B8JUL90DXgdiQlZKd29scTd0eUU/view?usp=drivesdk
Awesome, thanks Z!
Do you think it makes sense to pickup a couple of those thrust washers and take care of that TSB while I'm in there - though I don't have that ting/clicking issue.
Absolutely! Kill Two birds with one stone. Z :)
(https://i.imgur.com/UYKMhOih.jpg)(https://i.imgur.com/kcAUPlgh.jpg)(https://i.imgur.com/Awr8F7dh.jpg)(https://i.imgur.com/k92h8GVh.jpg)
Those washers are needed/used for front only I believe? I am gonna pickup a set for when I do H&R's next weekend.
Quote from: ZSHO on April 29, 2018, 09:31:05 AM
Absolutely! Kill Two birds with one stone. Z :)
And now you know why we love pics. They do indeed prove their worth, every time.
Quote from: SHOdded on April 29, 2018, 01:39:38 PM
Quote from: ZSHO on April 29, 2018, 09:31:05 AM
Absolutely! Kill Two birds with one stone. Z :)
And now you know why we love pics. They do indeed prove their worth, every time.
True Indeed kind sir. Z
Guys,
Thanks a lot for the additional info, especially the pics!! Will let you know how it turns out.
NP klrsmith..Best of luck to ya. Z
! No longer available (http://www.youtube.com/watch?v=BnbCig-wR1Q#)
FYI - The part number Z gave is very hard to find right now. None of the online sights have them and my local dealer said none of the warhouses had them in stock.
He was however able to do some digging and said there is a new replacement number for them.
F2GZ-7G273-A
I just ordered a pair of the new number and will advise when they arrive in a few days. It they look the same and install well I will put a post in the TSB thread.
I used BB5Z-7G273-B
on my 2010 when I installed H&R springs. Worked beautifully, mine were all metal though no plastic.
Wheel hub torque should be the same as 2010 too, 258 ft lbs.
Someone please correct if I'm wrong.
It seems like a washer Frenzy in the works. Lol. :D
It appears that the previous part number has been Discontinued and replaced by Part number - 7G273. Z
Quote from: glock-coma on April 30, 2018, 12:37:21 PM
Wheel hub torque should be the same as 2010 too, 258 ft lbs.
Someone please correct if I'm wrong.
That sounds about right Glock. IIRC. Z
Picked up the new washers today. These are all steel, no plastic/Teflon or anything. Just stamped steel.
Install planned for the weekend.(https://uploads.tapatalk-cdn.com/20180502/4fbd4e08d8a16ad9af4352916c146f97.jpg)
Sent from my SAMSUNG-SM-G935A using Tapatalk
Quote from: lamrith on May 01, 2018, 09:14:24 PM
Picked up the new washers today. These are all steel, no plastic/Teflon or anything. Just stamped steel.
Install planned for the weekend.(https://uploads.tapatalk-cdn.com/20180502/4fbd4e08d8a16ad9af4352916c146f97.jpg)
Sent from my SAMSUNG-SM-G935A using Tapatalk
@ lamrith Thanks for posting PICS of the updated thrust washers and best of luck with the install. Z