• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

FORScan?

Started by Gjkrisa, October 28, 2016, 10:54:00 PM

Previous topic - Next topic

MiWiAu

#15
Quote from: SHOdded on January 10, 2017, 07:47:51 AM
Codes or PIDs, Mike?  You cannot add PIDs into any module.  You can add PIDs to Torque Pro to read the existing PIDs in the vehicle's modules.  You cannot add PIDs to Forscan, period.  forscan.org forums are a good resource to browse through/ask questions in as well.

Thanks, Manu.

I don't think I need to add any PIDs. I was curious if it was possible to manually add the 8 digit alphanumeric TPMS ID to an existing cell on the BCM. Like if there was old sensor data stored, could I replace it with new sensor data?

And/or if there was a stored DTC on the BCM, would I be able to clear them with FORScan?

I'll try over on the Forscan forum you mentioned as well. Can never have too many hooks in the water! :)

Thanks for the feedback!


Sent from my iPhone using Tapatalk
2013 XSport

SHOdded

I see, you want to populate the data values into the PIDs and force recognition that way.  Great idea, IDK if it is possible though, hope it is.  Then we would find out whether the system periodically scans these values and resets to the most current discovery or simply leaves them alone :)
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

MiWiAu

Quote from: SHOdded on January 10, 2017, 09:46:40 AM
I see, you want to populate the data values into the PIDs and force recognition that way.  Great idea, IDK if it is possible though, hope it is.  Then we would find out whether the system periodically scans these values and resets to the most current discovery or simply leaves them alone :)

Correct! That was my thought. Force it in and see if it's accepted. Sheesh, when it's put that way, I feel ashamed. LOL

I just posted on the FORScan forum as well. Here's the link for anyone who wants to follow along. I'll be sure to post a resolution here as well, if/when I get this figured out.

http://forscan.org/forum/viewtopic.php?f=5&t=2943


Sent from my iPhone using Tapatalk
2013 XSport

Gjkrisa

Use forscan to  change to different factory splash screens
http://www.fiestastforum.com/forum/showthread.php?t=11920

Sent from my Nexus 6P using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

derfdog15

Quote from: Gjkrisa on January 12, 2017, 05:20:29 AM
Use forscan to  change to different factory splash screens
http://www.fiestastforum.com/forum/showthread.php?t=11920

Sent from my Nexus 6P using Tapatalk

Anyway to add a custom one? Work with Sync2 I assume?

Would be cool to have Ford Racing or SHO
2015 Tuxedo Black SHO PP -(SAE corrected): 369.4/451.4 - Gone to the automotive graveyard but not forgotten

2016 F150 FX4 Sport - 3.5L V6 Ecoboost - Stock for now

2003 Redfire V6 Mustang - Building to be an 11 second car

MiWiAu

#20
Quote from: derfdog15 on January 12, 2017, 10:53:20 AM
Quote from: Gjkrisa on January 12, 2017, 05:20:29 AM
Use forscan to  change to different factory splash screens
http://www.fiestastforum.com/forum/showthread.php?t=11920

Sent from my Nexus 6P using Tapatalk

Anyway to add a custom one? Work with Sync2 I assume?

Would be cool to have Ford Racing or SHO

At one point I think I saw a thread (different forum) on doing custom splash screens via SD card flashing. It required some minor manipulation to the Sync update code.

IIRC, I think it was a Raptor forum because the Raptor guys were getting Lincoln splash screens after a Sync update. I believe one of the posters explained how to update the code to add your own screens. Didn't look all that difficult, but I haven't tried it myself.

If it can be done with FORScan, that would probably be a lot simpler. :)


Sent from my iPhone using Tapatalk
2013 XSport

Gjkrisa

To add your own splash screen you would need to some how do it with flash card.
Now that we have a physical update someone can reverse engineer it and just make it change splash screen. Maybe even make a theme.


Sent from my Nexus 6P using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

ecoboostsho

Has anyone tried this yet on a SHO?  I assume that is SYNC 3 only as well - the Sync 2 addresses would probably be different.  If one of you SYNC 3 guys is feeling adventurous you should try it out!
2013 White SHO w/PP, Gearhead Tuned, 3 Bar, 160T, Plugs...Mess with the Bull and you'll get the Horn. :)
Previous 2011 Tuxedo Black SHO w/PP - 12.89 1/4 Mile

Gjkrisa

I plan to do it tomorrow.

Sent from my Nexus 6P using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Gjkrisa

Quote from: ecoboostsho on January 13, 2017, 10:34:22 AM
Has anyone tried this yet on a SHO?  I assume that is SYNC 3 only as well - the Sync 2 addresses would probably be different.  If one of you SYNC 3 guys is feeling adventurous you should try it out!
I didn't spend much time looking at but may have Info you want
http://www.fiestastforum.com/forum/showthread.php?t=11344

https://docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/htmlview#gid=815852466

Sent from my Nexus 6P using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

ecoboostsho

Very cool. Will take a look!

Sent from my XT1096 using Tapatalk

2013 White SHO w/PP, Gearhead Tuned, 3 Bar, 160T, Plugs...Mess with the Bull and you'll get the Horn. :)
Previous 2011 Tuxedo Black SHO w/PP - 12.89 1/4 Mile

Gjkrisa

#26
Quote from: ecoboostsho on January 13, 2017, 10:34:22 AM
Has anyone tried this yet on a SHO?  I assume that is SYNC 3 only as well - the Sync 2 addresses would probably be different.  If one of you SYNC 3 guys is feeling adventurous you should try it out!
Just did this is what I had to change to get Lincoln presidential splash
Quote from: Gjkrisa on October 28, 2016, 10:54:00 PM
Hey anyone know much about these features in FORScan what do you change?

Only thing I've done is turn off the honk when double locking and turn the turn signals to daylights.

Change factory splash screen.
http://www.fiestastforum.com/forum/showthread.php?t=11920

https://drive.google.com/folderview?id=0BySleg7SM4KcSzVYeF9ueGlKWVE
Sent from my Nexus 6P using Tapatalk


http://forscan.org/forum/viewtopic.php?f=5&t=2331

http://www.f150forum.com/f118/forscan-software-enable-disable-features-your-truck-348987/index540/
Found this on a forum how to disable double honk on 2016 explorer


https://docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/htmlview#gid=815852466

Fd0-02-01 xxxxx4xxxxxx and fd0-02-02 8xxx

Sent from my Nexus 6P using Tapatalk
2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Gjkrisa

#27
Playing with these was fun when I get more time im going to try more random things in here and print out the f150 doc to have some understanding

I wish there was a way to add the complete value that's not in there already I may try to edit the backup file and add the one that should be for the disable double honk.
Sent from my Nexus 6P using Tapatalk
2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

MiWiAu

Do any of you guys have issues with your OBDLink MX BT dropping connections? My connection drops out frequently enough to not want to attempt programming. I don't want to brick a module because a signal dropped part way through a flash.


Sent from my iPhone using Tapatalk
2013 XSport

Gjkrisa

#29
I have not.
get obd link app to verify you didn't get a clone

Sent from my Nexus 6P using Tapatalk
2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder